xref: /freebsd-10.0-release/contrib/xz/po/cs.po

# XZ Utils Czech translation
# This file is put in the public domain.
# Marek ��ernock�� <marek@manet.cz>, 2010.
#
msgid ""
msgstr ""
"Project-Id-Version: xz-utils\n"
"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
"POT-Creation-Date: 2010-09-17 18:33+0200\n"
"PO-Revision-Date: 2010-09-17 18:54+0200\n"
"Last-Translator: Marek ��ernock�� <marek@manet.cz>\n"
"Language-Team: Czech <diskuze@lists.l10n.cz>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2\n"
"X-Poedit-Language: Czech\n"
"X-Poedit-SourceCharset: utf-8\n"

#: src/xz/args.c:333
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s: Nezn��m�� typ form��tu souboru"

#: src/xz/args.c:356 src/xz/args.c:364
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s: Nezn��m�� typ kontroly integrity"

#: src/xz/args.c:382
msgid "Only one file can be specified with `--files' or `--files0'."
msgstr ""
"Spolu s p��ep��na��i ���--files��� nebo ���--files0��� m����e b��t zad��n pouze jeden soubor"

#: src/xz/args.c:445
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "Prom��nn�� prost��ed�� %s obsahuje p����li�� mnoho argument��"

#: src/xz/coder.c:95
msgid "Maximum number of filters is four"
msgstr "Maxim��ln�� po��et filtr�� je ��ty��i"

#: src/xz/coder.c:108
msgid "Memory usage limit is too low for the given filter setup."
msgstr "Omezen�� pou��iteln�� pam��ti je p����li�� mal�� pro dan�� nastaven�� filtru."

#: src/xz/coder.c:129
msgid "Using a preset in raw mode is discouraged."
msgstr "Pou��it�� p��ednastaven�� v re��imu raw je nevhodn��."

#: src/xz/coder.c:131
msgid "The exact options of the presets may vary between software versions."
msgstr ""
"P��esn�� volby u p��ednastaven�� se mohou li��it mezi r��zn��mi verzemi softwaru."

#: src/xz/coder.c:157
msgid "The .lzma format supports only the LZMA1 filter"
msgstr "Form��t .lzma podporuje pouze filtr LZMA1"

#: src/xz/coder.c:165
msgid "LZMA1 cannot be used with the .xz format"
msgstr "LZMA1 nelze pou����t s form��tem .xz"

#: src/xz/coder.c:182
msgid "Unsupported filter chain or filter options"
msgstr "Nepodporovan�� omezuj��c�� filtr nebo volby filtru"

#: src/xz/coder.c:190
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "Dekomprimace bude vy��adovat %s MiB pam��ti."

#: src/xz/coder.c:247
#, c-format
msgid ""
"Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the "
"memory usage limit of %s MiB"
msgstr ""
"P��izp��sobit velikost slovn��ku LZMA%c z %s MiB na %s MiB, tak aby nebylo "
"p��ekro��eno omezen�� pou��iteln�� pam��ti %s MiB"

#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c:137
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s: Vypad�� to, ��e soubor byl p��esunut, proto nebude odstran��n"

#: src/xz/file_io.c:144 src/xz/file_io.c:590
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s: Nelze odstranit: %s"

#: src/xz/file_io.c:169
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s: Nelze nastavit vlastn��ka souboru: %s"

#: src/xz/file_io.c:175
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s: Nelze nastavit skupinu souboru: %s"

#: src/xz/file_io.c:194
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s: Nelze nastavit opr��vn��n�� souboru: %s"

#: src/xz/file_io.c:337 src/xz/file_io.c:420
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s: Jedn�� se o symbolick�� odkaz, vynech��v�� se"

#: src/xz/file_io.c:455
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s: Jedn�� se o slo��ku, vynech��v�� se"

#: src/xz/file_io.c:462
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s: Nejedn�� se o b����n�� soubor, vynech��v�� se"

#: src/xz/file_io.c:479
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s: Soubor m�� nastaven�� bit setuid nebo setgid, vynech��v�� se"

#: src/xz/file_io.c:486
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s: Soubor m�� nastaven�� bit sticky, vynech��v�� se"

#: src/xz/file_io.c:493
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s: Vstupn�� soubor m�� v��ce ne�� jeden pevn�� odkaz, vynech��v�� se"

#: src/xz/file_io.c:714
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "Chyba p��i obnoven�� p����znaku O_APPEND na standardn�� v��stup: %s"

#: src/xz/file_io.c:726
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s: Selhalo zav��en�� souboru: %s"

#: src/xz/file_io.c:762 src/xz/file_io.c:946
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr ""
"%s: Selhalo nastaven�� pozice p��i pokusu o vytvo��en�� z��lo��n��ho souboru: %s"

#: src/xz/file_io.c:821
#, c-format
msgid "%s: Read error: %s"
msgstr "%s: Chyba ��ten��: %s"

#: src/xz/file_io.c:844
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s: Chyba p��i posunu v r��mci souboru: %s"

#: src/xz/file_io.c:854
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s: Neo��ek��van�� konec souboru"

#: src/xz/file_io.c:904
#, c-format
msgid "%s: Write error: %s"
msgstr "%s: Chyba z��pisu: %s"

#: src/xz/hardware.c:100
msgid "Disabled"
msgstr "Vypnuto"

#. TRANSLATORS: Test with "xz --info-memory" to see if
#. the alignment looks nice.
#: src/xz/hardware.c:119
msgid "Total amount of physical memory (RAM): "
msgstr "Celkov�� mno��stv�� fyzick�� pam��ti (RAM):     "

#: src/xz/hardware.c:121
msgid "Memory usage limit for compression:    "
msgstr "Omezen�� pou��iteln�� pam��ti pro komprimaci:  "

#: src/xz/hardware.c:123
msgid "Memory usage limit for decompression:  "
msgstr "Omezen�� pou��iteln�� pam��ti pro dekomprimaci:"

#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables, so the width must not
#. exceed ten columns with a fixed-width font.
#: src/xz/list.c:62
msgid "None"
msgstr "����dn��"

#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). This and other "Unknown-N"
#. strings are used in tables, so the width must not exceed ten
#. columns with a fixed-width font. It's OK to omit the dash if
#. you need space for one extra letter, but don't use spaces.
#: src/xz/list.c:69
msgid "Unknown-2"
msgstr "nezn��m��-2"

#: src/xz/list.c:70
msgid "Unknown-3"
msgstr "nezn��m��-3"

#: src/xz/list.c:72
msgid "Unknown-5"
msgstr "nezn��m��-5"

#: src/xz/list.c:73
msgid "Unknown-6"
msgstr "nezn��m��-6"

#: src/xz/list.c:74
msgid "Unknown-7"
msgstr "nezn��m��-7"

#: src/xz/list.c:75
msgid "Unknown-8"
msgstr "nezn��m��-8"

#: src/xz/list.c:76
msgid "Unknown-9"
msgstr "nezn��m��-9"

#: src/xz/list.c:78
msgid "Unknown-11"
msgstr "nezn��m��-11"

#: src/xz/list.c:79
msgid "Unknown-12"
msgstr "nezn��m��-12"

#: src/xz/list.c:80
msgid "Unknown-13"
msgstr "nezn��m��-13"

#: src/xz/list.c:81
msgid "Unknown-14"
msgstr "nezn��m��-14"

#: src/xz/list.c:82
msgid "Unknown-15"
msgstr "nezn��m��-15"

#: src/xz/list.c:126
#, c-format
msgid "%s: File is empty"
msgstr "%s: Soubor je pr��zdn��"

#: src/xz/list.c:131
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s: Je p����li�� mal�� na to, aby to mohl b��t platn�� soubor .xz"

#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c:612
msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
msgstr "Proud   Bloky      Komprim    Nekomprim  Pom��r  Kontrl  N��zev souboru"

#: src/xz/list.c:652
#, c-format
msgid "  Streams:            %s\n"
msgstr "  Proud��:                  %s\n"

#: src/xz/list.c:654
#, c-format
msgid "  Blocks:             %s\n"
msgstr "  Blok��:                   %s\n"

#: src/xz/list.c:656
#, c-format
msgid "  Compressed size:    %s\n"
msgstr "  Komprimovan�� velikost:   %s\n"

#: src/xz/list.c:659
#, c-format
msgid "  Uncompressed size:  %s\n"
msgstr "  Nekomprimovan�� velikost: %s\n"

#: src/xz/list.c:662
#, c-format
msgid "  Ratio:              %s\n"
msgstr "  Pom��r komprimace:        %s\n"

#: src/xz/list.c:664
#, c-format
msgid "  Check:              %s\n"
msgstr "  Typ kontroly:            %s\n"

#: src/xz/list.c:665
#, c-format
msgid "  Stream padding:     %s\n"
msgstr "  Zarovn��n�� proudu:        %s\n"

#. TRANSLATORS: The second line is column headings. All except
#. Check are right aligned; Check is left aligned. Test with
#. "xz -lv foo.xz".
#: src/xz/list.c:693
msgid ""
"  Streams:\n"
"    Stream    Blocks      CompOffset    UncompOffset        CompSize      "
"UncompSize  Ratio  Check      Padding"
msgstr ""
"  Proudy:\n"
"     Proud     Bloky     KomprPozice   NekomprPozice   KomprVelikost "
"NekomprVelikost  Pom��r  Kontrola   Zarovn��n��"

#. TRANSLATORS: The second line is column headings. All
#. except Check are right aligned; Check is left aligned.
#: src/xz/list.c:748
#, c-format
msgid ""
"  Blocks:\n"
"    Stream     Block      CompOffset    UncompOffset       TotalSize      "
"UncompSize  Ratio  Check"
msgstr ""
"  Bloky:\n"
"     Proud      Blok     KomprPozice   NekomprPozice    CelkVelikost "
"NekomprVelikost  Pom��r  Kontrola"

#. TRANSLATORS: These are additional column headings
#. for the most verbose listing mode. CheckVal
#. (Check value), Flags, and Filters are left aligned.
#. Header (Block Header Size), CompSize, and MemUsage
#. are right aligned. %*s is replaced with 0-120
#. spaces to make the CheckVal column wide enough.
#. Test with "xz -lvv foo.xz".
#: src/xz/list.c:760
#, c-format
msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
msgstr "   KontrHod %*s Hlavi��  P����znaky     KomprVel    Pou��iPam  Filtry"

#: src/xz/list.c:838 src/xz/list.c:1007
#, c-format
msgid "  Memory needed:      %s MiB\n"
msgstr "  Pot��ebn�� pam����:          %s MiB\n"

#: src/xz/list.c:840 src/xz/list.c:1009
#, c-format
msgid "  Sizes in headers:   %s\n"
msgstr "  Velikosti v hlavi��k��ch:  %s\n"

#: src/xz/list.c:841 src/xz/list.c:1010
msgid "Yes"
msgstr "Ano"

#: src/xz/list.c:841 src/xz/list.c:1010
msgid "No"
msgstr "Ne"

#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c:986
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "%s soubor\n"
msgstr[1] "%s soubory\n"
msgstr[2] "%s soubor��\n"

#: src/xz/list.c:999
msgid "Totals:"
msgstr "Celkem:"

#: src/xz/list.c:1000
#, c-format
msgid "  Number of files:    %s\n"
msgstr "  Po��et soubor��:           %s\n"

#: src/xz/list.c:1072
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list pracuje pouze se soubory .xz (--format=xz nebo --format=auto)"

#: src/xz/list.c:1078
msgid "--list does not support reading from standard input"
msgstr "--list nepodporuje ��ten�� ze standardn��ho vstupu"

#: src/xz/main.c:89
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s: Chyba p��i ��ten�� n��zv�� soubor��: %s"

#: src/xz/main.c:96
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s: Neo��ek��van�� konec vstupu p��i ��ten�� n��zv�� soubor��"

#: src/xz/main.c:120
#, c-format
msgid ""
"%s: Null character found when reading filenames; maybe you meant to use `--"
"files0' instead of `--files'?"
msgstr ""
"%s: Byl nalezen nulov�� znak p��i ��ten�� n��zv�� soubor��; necht��li jste n��hodou "
"pou����t ���--files0��� m��sto ���--files���?"

#: src/xz/main.c:174
msgid "Compression and decompression with --robot are not supported yet."
msgstr "Komprimace a dekomprimace s p��ep��na��em --robot nen�� zat��m podporovan��."

#: src/xz/main.c:231
msgid ""
"Cannot read data from standard input when reading filenames from standard "
"input"
msgstr ""
"Ze standardn��ho vstupu nelze ����st data, kdy�� se ze standardn��ho vstupu "
"na����taj�� n��zvy soubor��"

#: src/xz/message.c:800 src/xz/message.c:844
msgid "Internal error (bug)"
msgstr "Intern�� chyba"

#: src/xz/message.c:807
msgid "Cannot establish signal handlers"
msgstr "Nelze ustanovit ovlada�� sign��lu"

#: src/xz/message.c:816
msgid "No integrity check; not verifying file integrity"
msgstr "����dn�� kontrola integrity; integrita souboru se nebude ov����ovat"

#: src/xz/message.c:819
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr ""
"Nepodporovan�� typ kontroly integrity; integrita souboru se nebude ov����ovat"

#: src/xz/message.c:826
msgid "Memory usage limit reached"
msgstr "Dosa��eno omezen�� pou��iteln�� pam��ti"

#: src/xz/message.c:829
msgid "File format not recognized"
msgstr "Form��t souboru nebyl rozpozn��n"

#: src/xz/message.c:832
msgid "Unsupported options"
msgstr "Nepodporovan�� volba"

#: src/xz/message.c:835
msgid "Compressed data is corrupt"
msgstr "Komprimovan�� data jsou po��kozen��"

#: src/xz/message.c:838
msgid "Unexpected end of input"
msgstr "Neo��ek��van�� konec vstupu"

#: src/xz/message.c:886
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "Je vy��adov��no %s MiB pam��ti. Limit je %s."

#: src/xz/message.c:1053
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s: Omezuj��c�� filtr: %s\n"

#: src/xz/message.c:1063
#, c-format
msgid "Try `%s --help' for more information."
msgstr "Zkuste ���%s --help��� pro v��ce informac��"

#: src/xz/message.c:1089
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"Compress or decompress FILEs in the .xz format.\n"
"\n"
msgstr ""
"Pou��it��: %s [P��EP��NA��]... [SOUBOR]...\n"
"Komprimuje nebo dekomprimuje SOUBORy ve form��tu xz.\n"
"\n"

#: src/xz/message.c:1096
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
msgstr ""
"Povinn�� argumenty pro dlouh�� p��ep��na��e jsou povinn�� rovn���� pro kr��tk�� "
"p��ep��na��e.\n"

#: src/xz/message.c:1100
msgid " Operation mode:\n"
msgstr "Opera��n�� re��im:\n"

#: src/xz/message.c:1103
msgid ""
"  -z, --compress      force compression\n"
"  -d, --decompress    force decompression\n"
"  -t, --test          test compressed file integrity\n"
"  -l, --list          list information about .xz files"
msgstr ""
" -z, --compress        prov��st komprimaci\n"
" -d, --decompress      prov��st dekomprimaci\n"
" -t, --test            testovat integritu komprimovan��ho souboru\n"
" -l, --list            vypsat informace o souborech .xz"

#: src/xz/message.c:1109
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
"\n"
"Modifik��tory operac��:\n"

#: src/xz/message.c:1112
msgid ""
"  -k, --keep          keep (don't delete) input files\n"
"  -f, --force         force overwrite of output file and (de)compress links\n"
"  -c, --stdout        write to standard output and don't delete input files"
msgstr ""
" -k, --keep            zachovat (nemazat) vstupn�� soubory\n"
" -f, --force           vynutit p��epis v��stupn��ho souboru a de/komprimovat "
"odkazy\n"
" -c, --stdout          zapisovat na standardn�� v��stup a nemazat vstupn�� "
"soubory"

#: src/xz/message.c:1118
msgid ""
"      --no-sparse     do not create sparse files when decompressing\n"
"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
"                      omitted, filenames are read from the standard input;\n"
"                      filenames must be terminated with the newline "
"character\n"
"      --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
"     --no-sparse       nevytv����et p��i dekomprimaci z��lo��n�� soubory\n"
" -S, --suffix=.PRIP    pou����t u komprimovan��ch soubor�� p����ponu ���.PRIP���\n"
"     --files[=SOUBOR]  ����st n��zvy soubor��, kter�� se maj�� zpracovat, ze "
"SOUBORu;\n"
"                       pokud nen�� SOUBOR zad��n, ��te se ze standardn��ho "
"vstupu;\n"
"                       n��zvy soubor�� mus�� b��t zakon��eny znakem nov��ho ����dku\n"
"     --files0[=SOUBOR] stejn�� jako --files, ale pou����t k zakon��ov��n�� nulov�� "
"znak"

#: src/xz/message.c:1126
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
"\n"
"Z��kladn�� p��ep��na��e pro form��t souboru a komprimaci:\n"

#: src/xz/message.c:1128
msgid ""
"  -F, --format=FMT    file format to encode or decode; possible values are\n"
"                      `auto' (default), `xz', `lzma', and `raw'\n"
"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
"                      `crc32', `crc64' (default), or `sha256'"
msgstr ""
" -F, --format=FORM��T   form��t souboru k zak��dov��n�� nebo dek��dov��n��; mo��n��\n"
"                       hodnoty jsou ���auto��� (v��choz��), ���xz���, ���lzma��� a ���raw���\n"
" -C, --check=KONTROLA  typ kontroly integrity: ���none��� (pou����vejte s "
"rozmyslem),\n"
"                       ���crc32���, ���crc64��� (v��choz��) nebo ���sha256���"

#: src/xz/message.c:1135
msgid ""
"  -0 ... -9           compression preset; default is 6; take compressor "
"*and*\n"
"                      decompressor memory usage into account before using "
"7-9!"
msgstr ""
" -0 .. -9              p��ednastaven�� komprimace; v��choz�� je 6; ne�� "
"pou��ijete\n"
"                       hodnoty 7 ��� 9, vezm��te do ��vahy mno��stv�� pou��it�� "
"pam��ti"

#: src/xz/message.c:1139
msgid ""
"  -e, --extreme       try to improve compression ratio by using more CPU "
"time;\n"
"                      does not affect decompressor memory requirements"
msgstr ""
" -e, --extreme         zkusit zlep��it pom��r komprimace vyu��it��m v��ce ��asu\n"
"                       procesoru; nem�� vliv na pam����ov�� n��roky dekomprimace"

#: src/xz/message.c:1144
#, no-c-format
msgid ""
"      --memlimit-compress=LIMIT\n"
"      --memlimit-decompress=LIMIT\n"
"  -M, --memlimit=LIMIT\n"
"                      set memory usage limit for compression, "
"decompression,\n"
"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
msgstr ""
"     --memlimit-compress=LIMIT\n"
"     --memlimit-decompress=LIMIT\n"
" -M, --memlimit=LIMIT\n"
"                       nastav�� omezen�� pou��iteln�� pam��ti pro komprimaci,\n"
"                       dekomprimaci nebo oboj��; LIMIT je v bajtech, % z "
"pam��ti\n"
"                       RAM nebo 0 pro v��choz��"

#: src/xz/message.c:1151
msgid ""
"      --no-adjust     if compression settings exceed the memory usage "
"limit,\n"
"                      give an error instead of adjusting the settings "
"downwards"
msgstr ""
"     --no-adjust       pokud nastaven�� komprimace p��es��hne omezen�� "
"pou��iteln��\n"
"                       pam��ti, p��edat chybu nam��sto sn����en�� nastaven��"

#: src/xz/message.c:1157
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
"\n"
"Vlastn�� omezuj��c�� filtr pro komprimaci (alternativa k pou��it�� "
"p��ednastaven��ch):"

#: src/xz/message.c:1166
msgid ""
"\n"
"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero "
"or\n"
"  --lzma2[=OPTS]      more of the following options (valid values; "
"default):\n"
"                        preset=PRE reset options to a preset (0-9[e])\n"
"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     number of literal context bits (0-4; 3)\n"
"                        lp=NUM     number of literal position bits (0-4; 0)\n"
"                        pb=NUM     number of position bits (0-4; 2)\n"
"                        mode=MODE  compression mode (fast, normal; normal)\n"
"                        nice=NUM   nice length of a match (2-273; 64)\n"
"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; "
"bt4)\n"
"                        depth=NUM  maximum search depth; 0=automatic "
"(default)"
msgstr ""
"\n"
" --lzma1[=VOLBY]       LZMA1 nebo LZMA2; VOLBY je ����rkou odd��lovan�� seznam "
"����dn��\n"
" --lzma2[=VOLBY]       nebo v��ce n��sleduj��c��ch voleb (platn�� hodnoty; "
"v��choz��):\n"
"                         preset=P��E zm��nit volby na P��Ednastaven�� (0 ��� 9"
"[e])\n"
"                         dict=PO��   velikost slovn��ku (4 KiB ��� 1536 MiB; 8 "
"MiB)\n"
"                         lc=PO��     po��et kontextov��ch bit�� liter��lu (0 ��� 4; "
"3)\n"
"                         lp=PO��     po��et pozi��n��ch bit�� liter��lu (0 ��� 4; "
"0)\n"
"                         pb=PO��     po��et pozi��n��ch bit�� (0 ��� 4; 2)\n"
"                         mode=RE��IM re��im komprimace (fast, normal; normal)\n"
"                         nice=NUM   p����zniv�� d��lka shody (2 ��� 273; 64)\n"
"                         mf=N��ZEV   hled��n�� shod (hc3, hc4, bt2, bt3, bt4; "
"bt4)\n"
"                         depth=PO��  maxim��ln�� hloubka prohled��v��n��;\n"
"                                    0 = automaticky (v��choz��)"

#: src/xz/message.c:1181
msgid ""
"\n"
"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
"  --sparc[=OPTS]      SPARC BCJ filter\n"
"                      Valid OPTS for all BCJ filters:\n"
"                        start=NUM  start offset for conversions (default=0)"
msgstr ""
"\n"
" --x86[=VOLBY]         Filtr x86 BCJ (32bitov�� a 64bitov��)\n"
" --powerpc[=VOLBY]     Filtr PowerPC BCJ (pouze big endian)\n"
" --ia64[=VOLBY]        Filtr IA64 (Itanium) BCJ\n"
" --arm[=VOLBY]         Filtr ARM BCJ (pouze little endian)\n"
" --armthumb[=VOLBY]    Filtr ARM-Thumb BCJ (pouze little endian)\n"
" --sparc[=VOLBY]       Filtr SPARC BCJ\n"
"                       Platn�� volby pro v��echny filtry BCJ:\n"
"                         start=PO��  po����te��n�� posun pro p��evody (v��choz��=0)"

#: src/xz/message.c:1193
msgid ""
"\n"
"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
"                        dist=NUM   distance between bytes being subtracted\n"
"                                   from each other (1-256; 1)"
msgstr ""
"\n"
" --delta[=VOLBY]       Filtr Delta; platn�� VOLBY (platn�� hodnoty; v��choz��):\n"
"                         dist=PO��   vzd��lenost mezi bajty, kter�� jsou "
"ode����t��ny\n"
"                                    jeden od druh��ho (1 ��� 256; 1)"

#: src/xz/message.c:1201
msgid ""
"\n"
" Other options:\n"
msgstr ""
"\n"
" Ostatn�� p��ep��na��e:\n"

#: src/xz/message.c:1204
msgid ""
"  -q, --quiet         suppress warnings; specify twice to suppress errors "
"too\n"
"  -v, --verbose       be verbose; specify twice for even more verbose"
msgstr ""
" -q, --quiet           potla��it varov��n��; zad��n��m dvakr��t, potla����te i "
"chyby\n"
" -v, --verbose         podrobn��j���� zpr��vy; zad��n��m dvakr��t, budou je��t��\n"
"                       podrobn��j����"

#: src/xz/message.c:1209
msgid "  -Q, --no-warn       make warnings not affect the exit status"
msgstr " -Q, --no-warn         zp��sob��, ��e varov��n�� neovlivn�� stav ukon��en��"

#: src/xz/message.c:1211
msgid ""
"      --robot         use machine-parsable messages (useful for scripts)"
msgstr ""
"     --robot           pou����t strojov�� analyzovateln�� zpr��vy (u��ite��n�� pro\n"
"                       skripty)"

#: src/xz/message.c:1214
msgid ""
"      --info-memory   display the total amount of RAM and the currently "
"active\n"
"                      memory usage limits, and exit"
msgstr ""
"     --info-memory     zobrazit celkov�� mno��stv�� pam��ti RAM a sou��asn�� "
"aktivn��\n"
"                       omezen�� pou��iteln�� pam��ti a skon��it"

#: src/xz/message.c:1217
msgid ""
"  -h, --help          display the short help (lists only the basic options)\n"
"  -H, --long-help     display this long help and exit"
msgstr ""
" -h, --help            zobrazit kr��tkou n��pov��du (vyp����e jen z��kladn�� "
"p��ep��na��e)\n"
" -H, --long-help       zobrazit tuto ��plnou n��pov��du a skon��it"

#: src/xz/message.c:1221
msgid ""
"  -h, --help          display this short help and exit\n"
"  -H, --long-help     display the long help (lists also the advanced options)"
msgstr ""
" -h, --help            zobrazit tuto zkr��cenou n��pov��du a skon��it\n"
" -H, --long-help       zobrazit ��plnou n��pov��du (vyp����e i pokro��il�� "
"p��ep��na��e)"

#: src/xz/message.c:1226
msgid "  -V, --version       display the version number and exit"
msgstr " -V, --version         zobrazit ����slo verze a skon��it"

#: src/xz/message.c:1228
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
"\n"
"Pokud SOUBOR nen�� zad��n nebo pokud je -, bude se ����st ze standardn��ho "
"vstupu.\n"

#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
#: src/xz/message.c:1234
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr "Chyby hlaste na <%s> (v angli��tin�� nebo fin��tin��).\n"

#: src/xz/message.c:1236
#, c-format
msgid "%s home page: <%s>\n"
msgstr "Domovsk�� str��nka %s: <%s>\n"

#: src/xz/options.c:86
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr "%s: Volby mus�� b��t p��ry ���n��zev=hodnota��� odd��len�� ����rkami"

#: src/xz/options.c:93
#, c-format
msgid "%s: Invalid option name"
msgstr "%s: Neplatn�� n��zev volby"

#: src/xz/options.c:113
#, c-format
msgid "%s: Invalid option value"
msgstr "%s: Neplatn�� hodnota volby"

#: src/xz/options.c:247
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "Nepodporovan�� p��ednastaven�� LZMA1/LZMA2: %s"

#: src/xz/options.c:355
msgid "The sum of lc and lp must not exceed 4"
msgstr "Sou��et lc a lp nesm�� p��ekro��it hodnotu 4"

#: src/xz/options.c:359
#, c-format
msgid "The selected match finder requires at least nice=%<PRIu32>"
msgstr "Vybran�� vyhled��va�� shod vy��aduje minim��ln�� nice=%<PRIu32>"

#: src/xz/suffix.c:79 src/xz/suffix.c:164
#, c-format
msgid ""
"%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr ""
"%s: S p��ep��na��em --format=raw je vy��adov��n --sufix=.PRIP, vyjma z��pisu do "
"standardn��ho v��stupu"

#: src/xz/suffix.c:99
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s: N��zev souboru m�� nezn��mou p����ponu, vynech��v�� se"

#: src/xz/suffix.c:154
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s: Soubor ji�� m�� p����ponu ���%s���, vynech��v�� se"

#: src/xz/suffix.c:205
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s: Neplatn�� p����pona n��zvu souboru"

#: src/xz/util.c:61
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s: Hodnota nen�� nez��porn�� des��tkov�� ����slo"

#: src/xz/util.c:103
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s: Neplatn�� jednotka s p��edponou"

#: src/xz/util.c:105
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
msgstr ""
"Platn�� jednotky s p��edponami jsou ���KiB��� (2^10 B), ���MiB��� (2^20 B) a "
"���GiB��� (2^30 B)."

#: src/xz/util.c:122
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "Hodnota volby ���%s��� mus�� b��t v rozsahu [%<PRIu64>, %<PRIu64>]"

#: src/xz/util.c:247
msgid "Empty filename, skipping"
msgstr "Pr��zdn�� n��zev souboru, vynech��v�� se"

#: src/xz/util.c:261
msgid "Compressed data cannot be read from a terminal"
msgstr "Z termin��lu nelze ����st komprimovan�� data"

#: src/xz/util.c:274
msgid "Compressed data cannot be written to a terminal"
msgstr "Do termin��lu nelze zapisovat komprimovan�� data"

#: src/common/tuklib_exit.c:39
msgid "Writing to standard output failed"
msgstr "Z��pis do standardn��ho v��stupu selhal"

#: src/common/tuklib_exit.c:42
msgid "Unknown error"
msgstr "Nezn��m�� chyba"

#~ msgid "Limit was %s MiB, but %s MiB would have been needed"
#~ msgstr "Limit byl %s MiB, ale bylo by zapot��eb�� %s MiB"

#~ msgid "%s MiB (%s bytes)\n"
#~ msgstr "%s MiB (%s bajt��)\n"

#~ msgid ""
#~ "  -e, --extreme       use more CPU time when encoding to increase "
#~ "compression\n"
#~ "                      ratio without increasing memory usage of the decoder"
#~ msgstr ""
#~ " -e, --extreme         vyu����t v��ce procesorov��ho ��asu pro k��dov��n��, ����m�� "
#~ "se\n"
#~ "                       zv������ kompresn�� pom��r bez zv����en�� pam��ti pou��it�� "
#~ "kod��rem"

#~ msgid ""
#~ "  -M, --memory=NUM    use roughly NUM bytes of memory at maximum; 0 "
#~ "indicates\n"
#~ "                      the default setting, which is 40 % of total RAM"
#~ msgstr ""
#~ " -M, --memory=PO��      pou����t zhruba PO�� bajt�� pam��ti jako maximum; 0 "
#~ "znamen��\n"
#~ "                       v��choz�� nastaven��, co�� je 40% celkov��ho mno��stv�� "
#~ "pam��ti"

#~ msgid ""
#~ "\n"
#~ "  --subblock[=OPTS]   Subblock filter; valid OPTS (valid values; "
#~ "default):\n"
#~ "                        size=NUM   number of bytes of data per subblock\n"
#~ "                                   (1 - 256Mi; 4Ki)\n"
#~ "                        rle=NUM    run-length encoder chunk size (0-256; "
#~ "0)"
#~ msgstr ""
#~ "\n"
#~ " --subblock[=VOLBY]    Subblokov�� filtr; platn�� VOLBY (platn�� hodnoty; "
#~ "v��choz��):\n"
#~ "                         size=PO��   po��et bajt�� dat na subblok\n"
#~ "                                    (1 - 256 Mi; 4 Ki)\n"
#~ "                         rle=PO��    velikost d��vky pro kod��r run-length "
#~ "(0-256; 0)"

#~ msgid ""
#~ "On this system and configuration, this program will use a maximum of "
#~ "roughly\n"
#~ "%s MiB RAM and "
#~ msgstr ""
#~ "Na tomto syst��mu a s t��mto nastaven��m pou��ije tento program maximum ze "
#~ "zhruba\n"
#~ "%s MiB RAM a "

#~ msgid ""
#~ "one thread.\n"
#~ "\n"
#~ msgstr ""
#~ "jedno vl��kno.\n"
#~ "\n"

#~ msgid "%s: Invalid multiplier suffix. Valid suffixes:"
#~ msgstr "%s: Neplatn�� p����pona. Platn�� p����pony jsou:"