srat.c revision 279904
1/*-
2 * Copyright (c) 2010 Advanced Computing Technologies LLC
3 * Written by: John H. Baldwin <jhb@FreeBSD.org>
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28#include <sys/cdefs.h>
29__FBSDID("$FreeBSD: stable/10/sys/x86/acpica/srat.c 279904 2015-03-12 07:07:41Z scottl $");
30
31#include <sys/param.h>
32#include <sys/bus.h>
33#include <sys/kernel.h>
34#include <sys/lock.h>
35#include <sys/mutex.h>
36#include <sys/smp.h>
37#include <sys/vmmeter.h>
38#include <vm/vm.h>
39#include <vm/pmap.h>
40#include <vm/vm_param.h>
41#include <vm/vm_page.h>
42#include <vm/vm_phys.h>
43
44#include <contrib/dev/acpica/include/acpi.h>
45#include <contrib/dev/acpica/include/actables.h>
46
47#include <machine/intr_machdep.h>
48#include <machine/apicvar.h>
49
50#include <dev/acpica/acpivar.h>
51
52#if MAXMEMDOM > 1
53struct cpu_info {
54	int enabled:1;
55	int has_memory:1;
56	int domain;
57} cpus[MAX_APIC_ID + 1];
58
59struct mem_affinity mem_info[VM_PHYSSEG_MAX + 1];
60int num_mem;
61
62static ACPI_TABLE_SRAT *srat;
63static vm_paddr_t srat_physaddr;
64
65static int vm_domains[VM_PHYSSEG_MAX];
66
67static void	srat_walk_table(acpi_subtable_handler *handler, void *arg);
68
69/*
70 * Returns true if a memory range overlaps with at least one range in
71 * phys_avail[].
72 */
73static int
74overlaps_phys_avail(vm_paddr_t start, vm_paddr_t end)
75{
76	int i;
77
78	for (i = 0; phys_avail[i] != 0 && phys_avail[i + 1] != 0; i += 2) {
79		if (phys_avail[i + 1] < start)
80			continue;
81		if (phys_avail[i] < end)
82			return (1);
83		break;
84	}
85	return (0);
86
87}
88
89static void
90srat_parse_entry(ACPI_SUBTABLE_HEADER *entry, void *arg)
91{
92	ACPI_SRAT_CPU_AFFINITY *cpu;
93	ACPI_SRAT_X2APIC_CPU_AFFINITY *x2apic;
94	ACPI_SRAT_MEM_AFFINITY *mem;
95	int domain, i, slot;
96
97	switch (entry->Type) {
98	case ACPI_SRAT_TYPE_CPU_AFFINITY:
99		cpu = (ACPI_SRAT_CPU_AFFINITY *)entry;
100		domain = cpu->ProximityDomainLo |
101		    cpu->ProximityDomainHi[0] << 8 |
102		    cpu->ProximityDomainHi[1] << 16 |
103		    cpu->ProximityDomainHi[2] << 24;
104		if (bootverbose)
105			printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
106			    cpu->ApicId, domain,
107			    (cpu->Flags & ACPI_SRAT_CPU_ENABLED) ?
108			    "enabled" : "disabled");
109		if (!(cpu->Flags & ACPI_SRAT_CPU_ENABLED))
110			break;
111		KASSERT(!cpus[cpu->ApicId].enabled,
112		    ("Duplicate local APIC ID %u", cpu->ApicId));
113		cpus[cpu->ApicId].domain = domain;
114		cpus[cpu->ApicId].enabled = 1;
115		break;
116	case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY:
117		x2apic = (ACPI_SRAT_X2APIC_CPU_AFFINITY *)entry;
118		if (bootverbose)
119			printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
120			    x2apic->ApicId, x2apic->ProximityDomain,
121			    (x2apic->Flags & ACPI_SRAT_CPU_ENABLED) ?
122			    "enabled" : "disabled");
123		if (!(x2apic->Flags & ACPI_SRAT_CPU_ENABLED))
124			break;
125		KASSERT(!cpus[x2apic->ApicId].enabled,
126		    ("Duplicate local APIC ID %u", x2apic->ApicId));
127		cpus[x2apic->ApicId].domain = x2apic->ProximityDomain;
128		cpus[x2apic->ApicId].enabled = 1;
129		break;
130	case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
131		mem = (ACPI_SRAT_MEM_AFFINITY *)entry;
132		if (bootverbose)
133			printf(
134		    "SRAT: Found memory domain %d addr %jx len %jx: %s\n",
135			    mem->ProximityDomain, (uintmax_t)mem->BaseAddress,
136			    (uintmax_t)mem->Length,
137			    (mem->Flags & ACPI_SRAT_MEM_ENABLED) ?
138			    "enabled" : "disabled");
139		if (!(mem->Flags & ACPI_SRAT_MEM_ENABLED))
140			break;
141		if (!overlaps_phys_avail(mem->BaseAddress,
142		    mem->BaseAddress + mem->Length)) {
143			printf("SRAT: Ignoring memory at addr %jx\n",
144			    (uintmax_t)mem->BaseAddress);
145			break;
146		}
147		if (num_mem == VM_PHYSSEG_MAX) {
148			printf("SRAT: Too many memory regions\n");
149			*(int *)arg = ENXIO;
150			break;
151		}
152		slot = num_mem;
153		for (i = 0; i < num_mem; i++) {
154			if (mem_info[i].end <= mem->BaseAddress)
155				continue;
156			if (mem_info[i].start <
157			    (mem->BaseAddress + mem->Length)) {
158				printf("SRAT: Overlapping memory entries\n");
159				*(int *)arg = ENXIO;
160				return;
161			}
162			slot = i;
163		}
164		for (i = num_mem; i > slot; i--)
165			mem_info[i] = mem_info[i - 1];
166		mem_info[slot].start = mem->BaseAddress;
167		mem_info[slot].end = mem->BaseAddress + mem->Length;
168		mem_info[slot].domain = mem->ProximityDomain;
169		num_mem++;
170		break;
171	}
172}
173
174/*
175 * Ensure each memory domain has at least one CPU and that each CPU
176 * has at least one memory domain.
177 */
178static int
179check_domains(void)
180{
181	int found, i, j;
182
183	for (i = 0; i < num_mem; i++) {
184		found = 0;
185		for (j = 0; j <= MAX_APIC_ID; j++)
186			if (cpus[j].enabled &&
187			    cpus[j].domain == mem_info[i].domain) {
188				cpus[j].has_memory = 1;
189				found++;
190			}
191		if (!found) {
192			printf("SRAT: No CPU found for memory domain %d\n",
193			    mem_info[i].domain);
194			return (ENXIO);
195		}
196	}
197	for (i = 0; i <= MAX_APIC_ID; i++)
198		if (cpus[i].enabled && !cpus[i].has_memory) {
199			printf("SRAT: No memory found for CPU %d\n", i);
200			return (ENXIO);
201		}
202	return (0);
203}
204
205/*
206 * Check that the SRAT memory regions cover all of the regions in
207 * phys_avail[].
208 */
209static int
210check_phys_avail(void)
211{
212	vm_paddr_t address;
213	int i, j;
214
215	/* j is the current offset into phys_avail[]. */
216	address = phys_avail[0];
217	j = 0;
218	for (i = 0; i < num_mem; i++) {
219		/*
220		 * Consume as many phys_avail[] entries as fit in this
221		 * region.
222		 */
223		while (address >= mem_info[i].start &&
224		    address <= mem_info[i].end) {
225			/*
226			 * If we cover the rest of this phys_avail[] entry,
227			 * advance to the next entry.
228			 */
229			if (phys_avail[j + 1] <= mem_info[i].end) {
230				j += 2;
231				if (phys_avail[j] == 0 &&
232				    phys_avail[j + 1] == 0) {
233					return (0);
234				}
235				address = phys_avail[j];
236			} else
237				address = mem_info[i].end + 1;
238		}
239	}
240	printf("SRAT: No memory region found for %jx - %jx\n",
241	    (uintmax_t)phys_avail[j], (uintmax_t)phys_avail[j + 1]);
242	return (ENXIO);
243}
244
245/*
246 * Renumber the memory domains to be compact and zero-based if not
247 * already.  Returns an error if there are too many domains.
248 */
249static int
250renumber_domains(void)
251{
252	int i, j, slot;
253
254	/* Enumerate all the domains. */
255	vm_ndomains = 0;
256	for (i = 0; i < num_mem; i++) {
257		/* See if this domain is already known. */
258		for (j = 0; j < vm_ndomains; j++) {
259			if (vm_domains[j] >= mem_info[i].domain)
260				break;
261		}
262		if (j < vm_ndomains && vm_domains[j] == mem_info[i].domain)
263			continue;
264
265		/* Insert the new domain at slot 'j'. */
266		slot = j;
267		for (j = vm_ndomains; j > slot; j--)
268			vm_domains[j] = vm_domains[j - 1];
269		vm_domains[slot] = mem_info[i].domain;
270		vm_ndomains++;
271		if (vm_ndomains > MAXMEMDOM) {
272			vm_ndomains = 1;
273			printf("SRAT: Too many memory domains\n");
274			return (EFBIG);
275		}
276	}
277
278	/* Renumber each domain to its index in the sorted 'domains' list. */
279	for (i = 0; i < vm_ndomains; i++) {
280		/*
281		 * If the domain is already the right value, no need
282		 * to renumber.
283		 */
284		if (vm_domains[i] == i)
285			continue;
286
287		/* Walk the cpu[] and mem_info[] arrays to renumber. */
288		for (j = 0; j < num_mem; j++)
289			if (mem_info[j].domain == vm_domains[i])
290				mem_info[j].domain = i;
291		for (j = 0; j <= MAX_APIC_ID; j++)
292			if (cpus[j].enabled && cpus[j].domain == vm_domains[i])
293				cpus[j].domain = i;
294	}
295	KASSERT(vm_ndomains > 0,
296	    ("renumber_domains: invalid final vm_ndomains setup"));
297
298	return (0);
299}
300
301/*
302 * Look for an ACPI System Resource Affinity Table ("SRAT")
303 */
304static void
305parse_srat(void *dummy)
306{
307	int error;
308
309	if (resource_disabled("srat", 0))
310		return;
311
312	srat_physaddr = acpi_find_table(ACPI_SIG_SRAT);
313	if (srat_physaddr == 0)
314		return;
315
316	/*
317	 * Make a pass over the table to populate the cpus[] and
318	 * mem_info[] tables.
319	 */
320	srat = acpi_map_table(srat_physaddr, ACPI_SIG_SRAT);
321	error = 0;
322	srat_walk_table(srat_parse_entry, &error);
323	acpi_unmap_table(srat);
324	srat = NULL;
325	if (error || check_domains() != 0 || check_phys_avail() != 0 ||
326	    renumber_domains() != 0) {
327		srat_physaddr = 0;
328		return;
329	}
330
331	/* Point vm_phys at our memory affinity table. */
332	mem_affinity = mem_info;
333}
334SYSINIT(parse_srat, SI_SUB_VM - 1, SI_ORDER_FIRST, parse_srat, NULL);
335
336static void
337srat_walk_table(acpi_subtable_handler *handler, void *arg)
338{
339
340	acpi_walk_subtables(srat + 1, (char *)srat + srat->Header.Length,
341	    handler, arg);
342}
343
344/*
345 * Setup per-CPU ACPI IDs.
346 */
347static void
348srat_set_cpus(void *dummy)
349{
350	struct cpu_info *cpu;
351	struct pcpu *pc;
352	u_int i;
353
354	if (srat_physaddr == 0)
355		return;
356	for (i = 0; i < MAXCPU; i++) {
357		if (CPU_ABSENT(i))
358			continue;
359		pc = pcpu_find(i);
360		KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
361		cpu = &cpus[pc->pc_apic_id];
362		if (!cpu->enabled)
363			panic("SRAT: CPU with APIC ID %u is not known",
364			    pc->pc_apic_id);
365		pc->pc_domain = cpu->domain;
366		if (bootverbose)
367			printf("SRAT: CPU %u has memory domain %d\n", i,
368			    cpu->domain);
369	}
370}
371SYSINIT(srat_set_cpus, SI_SUB_CPU, SI_ORDER_ANY, srat_set_cpus, NULL);
372
373/*
374 * Map a _PXM value to a VM domain ID.
375 *
376 * Returns the domain ID, or -1 if no domain ID was found.
377 */
378int
379acpi_map_pxm_to_vm_domainid(int pxm)
380{
381	int i;
382
383	for (i = 0; i < vm_ndomains; i++) {
384		if (vm_domains[i] == pxm)
385			return (i);
386	}
387
388	return (-1);
389}
390
391#endif /* MAXMEMDOM > 1 */
392