ng_btsocket.c revision 138238
1/*
2 * ng_btsocket.c
3 *
4 * Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in the
14 *    documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 *
28 * $Id: ng_btsocket.c,v 1.4 2003/09/14 23:29:06 max Exp $
29 * $FreeBSD: head/sys/netgraph/bluetooth/socket/ng_btsocket.c 138238 2004-11-30 22:28:50Z mlaier $
30 */
31
32#include <sys/param.h>
33#include <sys/systm.h>
34#include <sys/bitstring.h>
35#include <sys/errno.h>
36#include <sys/domain.h>
37#include <sys/kernel.h>
38#include <sys/lock.h>
39#include <sys/mbuf.h>
40#include <sys/mutex.h>
41#include <sys/protosw.h>
42#include <sys/socket.h>
43#include <sys/socketvar.h>
44#include <sys/sysctl.h>
45#include <sys/taskqueue.h>
46#include <netgraph/ng_message.h>
47#include <netgraph/netgraph.h>
48#include <netgraph/bluetooth/include/ng_bluetooth.h>
49#include <netgraph/bluetooth/include/ng_hci.h>
50#include <netgraph/bluetooth/include/ng_l2cap.h>
51#include <netgraph/bluetooth/include/ng_btsocket.h>
52#include <netgraph/bluetooth/include/ng_btsocket_hci_raw.h>
53#include <netgraph/bluetooth/include/ng_btsocket_l2cap.h>
54#include <netgraph/bluetooth/include/ng_btsocket_rfcomm.h>
55
56static int			ng_btsocket_modevent (module_t, int, void *);
57extern struct domain		ng_btsocket_domain;
58
59/*
60 * Bluetooth raw HCI sockets
61 */
62
63static struct pr_usrreqs	ng_btsocket_hci_raw_usrreqs = {
64	.pru_abort =		ng_btsocket_hci_raw_abort,
65	.pru_attach =		ng_btsocket_hci_raw_attach,
66	.pru_bind =		ng_btsocket_hci_raw_bind,
67	.pru_connect =		ng_btsocket_hci_raw_connect,
68	.pru_control =		ng_btsocket_hci_raw_control,
69	.pru_detach =		ng_btsocket_hci_raw_detach,
70	.pru_disconnect =	ng_btsocket_hci_raw_disconnect,
71	.pru_peeraddr =		ng_btsocket_hci_raw_peeraddr,
72	.pru_send =		ng_btsocket_hci_raw_send,
73	.pru_shutdown =		NULL,
74	.pru_sockaddr =		ng_btsocket_hci_raw_sockaddr,
75};
76
77/*
78 * Bluetooth raw L2CAP sockets
79 */
80
81static struct pr_usrreqs	ng_btsocket_l2cap_raw_usrreqs = {
82	.pru_abort =		ng_btsocket_l2cap_raw_abort,
83	.pru_attach =		ng_btsocket_l2cap_raw_attach,
84	.pru_bind =		ng_btsocket_l2cap_raw_bind,
85	.pru_connect =		ng_btsocket_l2cap_raw_connect,
86	.pru_control =		ng_btsocket_l2cap_raw_control,
87	.pru_detach =		ng_btsocket_l2cap_raw_detach,
88	.pru_disconnect =	ng_btsocket_l2cap_raw_disconnect,
89	.pru_peeraddr =		ng_btsocket_l2cap_raw_peeraddr,
90	.pru_send =		ng_btsocket_l2cap_raw_send,
91	.pru_shutdown =		NULL,
92	.pru_sockaddr =		ng_btsocket_l2cap_raw_sockaddr,
93};
94
95/*
96 * Bluetooth SEQPACKET L2CAP sockets
97 */
98
99static struct pr_usrreqs	ng_btsocket_l2cap_usrreqs = {
100	.pru_abort =		ng_btsocket_l2cap_abort,
101	.pru_accept =		ng_btsocket_l2cap_accept,
102	.pru_attach =		ng_btsocket_l2cap_attach,
103	.pru_bind =		ng_btsocket_l2cap_bind,
104	.pru_connect =		ng_btsocket_l2cap_connect,
105	.pru_control =		ng_btsocket_l2cap_control,
106	.pru_detach =		ng_btsocket_l2cap_detach,
107	.pru_disconnect =	ng_btsocket_l2cap_disconnect,
108        .pru_listen =		ng_btsocket_l2cap_listen,
109	.pru_peeraddr =		ng_btsocket_l2cap_peeraddr,
110	.pru_send =		ng_btsocket_l2cap_send,
111	.pru_shutdown =		NULL,
112	.pru_sockaddr =		ng_btsocket_l2cap_sockaddr,
113};
114
115/*
116 * Bluetooth STREAM RFCOMM sockets
117 */
118
119static struct pr_usrreqs	ng_btsocket_rfcomm_usrreqs = {
120	.pru_abort =		ng_btsocket_rfcomm_abort,
121	.pru_accept =		ng_btsocket_rfcomm_accept,
122	.pru_attach =		ng_btsocket_rfcomm_attach,
123	.pru_bind =		ng_btsocket_rfcomm_bind,
124	.pru_connect =		ng_btsocket_rfcomm_connect,
125	.pru_control =		ng_btsocket_rfcomm_control,
126	.pru_detach =		ng_btsocket_rfcomm_detach,
127	.pru_disconnect =	ng_btsocket_rfcomm_disconnect,
128        .pru_listen =		ng_btsocket_rfcomm_listen,
129	.pru_peeraddr =		ng_btsocket_rfcomm_peeraddr,
130	.pru_send =		ng_btsocket_rfcomm_send,
131	.pru_shutdown =		NULL,
132	.pru_sockaddr =		ng_btsocket_rfcomm_sockaddr,
133};
134
135/*
136 * Definitions of protocols supported in the BLUETOOTH domain
137 */
138
139static struct protosw		ng_btsocket_protosw[] = {
140{
141	SOCK_RAW,			/* protocol type */
142	&ng_btsocket_domain,		/* backpointer to domain */
143	BLUETOOTH_PROTO_HCI,		/* protocol */
144	PR_ATOMIC | PR_ADDR,		/* flags */
145	NULL, NULL, NULL,		/* input, output, ctlinput */
146	ng_btsocket_hci_raw_ctloutput,	/* ctloutput */
147	NULL,				/* ousrreq() */
148	ng_btsocket_hci_raw_init,	/* init */
149	NULL, NULL, NULL,		/* fasttimeo, slowtimo, drain */
150	&ng_btsocket_hci_raw_usrreqs,	/* usrreq table (above) */
151	/* { NULL } */			/* pfh (protocol filter head?) */
152},
153{
154	SOCK_RAW,			/* protocol type */
155	&ng_btsocket_domain,		/* backpointer to domain */
156	BLUETOOTH_PROTO_L2CAP,		/* protocol */
157	PR_ATOMIC | PR_ADDR,		/* flags */
158	NULL, NULL, NULL,		/* input, output, ctlinput */
159	NULL,				/* ctloutput */
160	NULL,				/* ousrreq() */
161	ng_btsocket_l2cap_raw_init,	/* init */
162	NULL, NULL, NULL,		/* fasttimeo, slowtimo, drain */
163	&ng_btsocket_l2cap_raw_usrreqs,	/* usrreq table (above) */
164	/* { NULL } */			/* pfh (protocol filter head?) */
165},
166{
167	SOCK_SEQPACKET,			/* protocol type */
168	&ng_btsocket_domain,		/* backpointer to domain */
169	BLUETOOTH_PROTO_L2CAP,		/* protocol */
170	PR_ATOMIC | PR_CONNREQUIRED,	/* flags */
171	NULL, NULL, NULL,		/* input, output, ctlinput */
172	ng_btsocket_l2cap_ctloutput,	/* ctloutput */
173	NULL,				/* ousrreq() */
174	ng_btsocket_l2cap_init,		/* init */
175	NULL, NULL, NULL,		/* fasttimeo, slowtimo, drain */
176	&ng_btsocket_l2cap_usrreqs,	/* usrreq table (above) */
177	/* { NULL } */			/* pfh (protocol filter head?) */
178},
179{
180	SOCK_STREAM,			/* protocol type */
181	&ng_btsocket_domain,		/* backpointer to domain */
182	BLUETOOTH_PROTO_RFCOMM,		/* protocol */
183	PR_ATOMIC | PR_CONNREQUIRED,	/* flags */
184	NULL, NULL, NULL,		/* input, output, ctlinput */
185	ng_btsocket_rfcomm_ctloutput,	/* ctloutput */
186	NULL,				/* ousrreq() */
187	ng_btsocket_rfcomm_init,	/* init */
188	NULL, NULL, NULL,		/* fasttimeo, slowtimo, drain */
189	&ng_btsocket_rfcomm_usrreqs,	/* usrreq table (above) */
190	/* { NULL } */			/* pfh (protocol filter head?) */
191}
192};
193#define ng_btsocket_protosw_size \
194	(sizeof(ng_btsocket_protosw)/sizeof(ng_btsocket_protosw[0]))
195#define ng_btsocket_protosw_end \
196	&ng_btsocket_protosw[ng_btsocket_protosw_size]
197
198/*
199 * BLUETOOTH domain
200 */
201
202struct domain			ng_btsocket_domain = {
203	AF_BLUETOOTH,			/* family */
204	"bluetooth",			/* domain name */
205	NULL,				/* init() */
206	NULL,				/* externalize() */
207	NULL,				/* dispose() */
208	ng_btsocket_protosw,		/* protosw entry */
209	ng_btsocket_protosw_end,	/* end of protosw entries */
210	NULL,				/* next domain in list */
211	NULL,				/* rtattach() */
212	0,				/* arg to rtattach in bits */
213	0				/* maxrtkey */
214};
215
216/*
217 * Socket sysctl tree
218 */
219
220SYSCTL_NODE(_net_bluetooth_hci, OID_AUTO, sockets, CTLFLAG_RW,
221	0, "Bluetooth HCI sockets family");
222SYSCTL_NODE(_net_bluetooth_l2cap, OID_AUTO, sockets, CTLFLAG_RW,
223	0, "Bluetooth L2CAP sockets family");
224SYSCTL_NODE(_net_bluetooth_rfcomm, OID_AUTO, sockets, CTLFLAG_RW,
225	0, "Bluetooth RFCOMM sockets family");
226
227/*
228 * Module
229 */
230
231static moduledata_t	ng_btsocket_mod = {
232	"ng_btsocket",
233	ng_btsocket_modevent,
234	NULL
235};
236
237DECLARE_MODULE(ng_btsocket, ng_btsocket_mod, SI_SUB_PROTO_DOMAIN,
238	SI_ORDER_ANY);
239MODULE_VERSION(ng_btsocket, NG_BLUETOOTH_VERSION);
240MODULE_DEPEND(ng_btsocket, ng_bluetooth, NG_BLUETOOTH_VERSION,
241	NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION);
242MODULE_DEPEND(ng_btsocket, netgraph, NG_ABI_VERSION,
243	NG_ABI_VERSION, NG_ABI_VERSION);
244
245/*
246 * Handle loading and unloading for this node type.
247 * This is to handle auxiliary linkages (e.g protocol domain addition).
248 */
249
250static int
251ng_btsocket_modevent(module_t mod, int event, void *data)
252{
253	int	error = 0;
254
255	switch (event) {
256	case MOD_LOAD:
257		net_add_domain(&ng_btsocket_domain);
258		break;
259
260	case MOD_UNLOAD:
261		/* XXX can't unload protocol domain yet */
262		error = EBUSY;
263		break;
264
265	default:
266		error = EOPNOTSUPP;
267		break;
268	}
269
270	return (error);
271} /* ng_btsocket_modevent */
272
273