RSPRO.hints revision 235661 
1# $FreeBSD: head/sys/mips/conf/RSPRO.hints 235661 2012-05-19 20:11:18Z adrian $
2
3# arge0 mdio bus
4hint.argemdio.0.at="nexus0"
5hint.argemdio.0.maddr=0x19000000
6hint.argemdio.0.msize=0x1000
7hint.argemdio.0.order=0
8
9# arge0: dedicated switch port
10hint.arge.0.phymask=0x10	# PHY4
11hint.arge.0.miimode=3		# RGMII
12hint.arge.0.mdio=mdioproxy1	# .. off of the switch mdiobus
13
14# arge1: nail to 1000/full, RGMII - connected to the switch
15hint.arge.1.media=1000		# Map to 1000/full
16hint.arge.1.fduplex=1		#
17hint.arge.1.phymask=0x0		# no directly mapped PHYs
18hint.arge.1.miimode=3		# RGMII
19
20hint.arswitch.0.is_7240=0
21hint.arswitch.0.numphys=4
22hint.arswitch.0.phy4cpu=1
23hint.arswitch.0.is_rgmii=1
24hint.arswitch.0.is_gmii=0
25
26# Don't flip on anything that isn't already enabled.
27# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
28# not used here.
29hint.gpio.0.function_set=0x00000000
30hint.gpio.0.function_clear=0x00000000
31
32# These are the GPIO LEDs and buttons which can be software controlled.
33hint.gpio.0.pinmask=0x000000ff
34
35# GPIO 0: Pin 1
36# GPIO 1: Pin 2
37# GPIO 2: RF LED
38# GPIO 3: Pin 3
39# GPIO 4: Pin 4
40# GPIO 5: Pin 5
41# GPIO 6: Pin 6
42# GPIO 7: Pin 7
43
44# RF led
45hint.gpioled.0.at="gpiobus0"
46hint.gpioled.0.name="rf"
47# pin 2
48hint.gpioled.0.pins=0x0004
49