1235320Sadrian# 2239759Sadrian# Specific board setup for the Atheros AP91 reference board. 3235320Sadrian# 4239759Sadrian# The AP93 has the following hardware: 5235320Sadrian# 6239759Sadrian# + AR7240 CPU SoC 7239759Sadrian# + AR9280 Wifi 8239759Sadrian# + Integrated switch (XXX speed?) 9239759Sadrian# + 16MB flash 10239759Sadrian# + 64MB RAM 11239759Sadrian# + uboot environment 12235320Sadrian 13239759Sadrian# $FreeBSD$ 14235320Sadrian 15239759Sadrianinclude "AR724X_BASE" 16239759Sadrianident "AP93" 17239759Sadrianhints "AP93.hints" 18235320Sadrian 19266331Sianoptions AR71XX_REALMEM=64*1024*1024 20235320Sadrian 21266331Sianoptions AR71XX_ENV_UBOOT 22235320Sadrian 23239759Sadrian# For DOS - enable if required 24239759Sadrianoptions MSDOSFS 25235320Sadrian 26239759Sadrian# uncompress - to boot read-only lzma natively from flash 27235320Sadriandevice geom_uncompress 28266331Sianoptions GEOM_UNCOMPRESS 29266331Sianoptions ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\" 30235320Sadrian 31239759Sadrian# Used for the static uboot partition map 32239759Sadriandevice geom_map 33235320Sadrian 34239759Sadrian# Options needed for the EEPROM based calibration/PCI configuration data. 35239759Sadrianoptions AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash 36239759Sadrianoptions ATH_EEPROM_FIRMWARE # Use EEPROM from flash 37239759Sadriandevice firmware # Used by the above 38235320Sadrian 39239759Sadrian# Options required for miiproxy and mdiobus 40239759Sadrianoptions ARGE_MDIO # Export an MDIO bus separate from arge 41239759Sadriandevice miiproxy # MDIO bus <-> MII PHY rendezvous 42235320Sadrian 43235320Sadriandevice etherswitch 44235320Sadriandevice arswitch 45