sun6i-a31-m9.dts revision 284090 
1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun6i-a31.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53#include <dt-bindings/pinctrl/sun4i-a10.h>
54
55/ {
56	model = "Mele M9 / A1000G Quad top set box";
57	compatible = "mele,m9", "allwinner,sun6i-a31";
58
59	chosen {
60		bootargs = "earlyprintk console=ttyS0,115200";
61	};
62
63	soc@01c00000 {
64		mmc0: mmc@01c0f000 {
65			pinctrl-names = "default";
66			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
67			vmmc-supply = <&reg_vcc3v3>;
68			bus-width = <4>;
69			cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
70			cd-inverted;
71			status = "okay";
72		};
73
74		usbphy: phy@01c19400 {
75			usb1_vbus-supply = <&reg_usb1_vbus>;
76			status = "okay";
77		};
78
79		ehci0: usb@01c1a000 {
80			status = "okay";
81		};
82
83		ehci1: usb@01c1b000 {
84			status = "okay";
85		};
86
87		pio: pinctrl@01c20800 {
88			led_pins_m9: led_pins@0 {
89				allwinner,pins = "PH13";
90				allwinner,function = "gpio_out";
91				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
92				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
93			};
94
95			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
96				allwinner,pins = "PH22";
97				allwinner,function = "gpio_in";
98				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
99				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
100			};
101
102			usb1_vbus_pin_m9: usb1_vbus_pin@0 {
103				allwinner,pins = "PC27";
104				allwinner,function = "gpio_out";
105				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
106				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
107			};
108		};
109
110		uart0: serial@01c28000 {
111			pinctrl-names = "default";
112			pinctrl-0 = <&uart0_pins_a>;
113			status = "okay";
114		};
115
116		gmac: ethernet@01c30000 {
117			pinctrl-names = "default";
118			pinctrl-0 = <&gmac_pins_mii_a>;
119			phy = <&phy1>;
120			phy-mode = "mii";
121			status = "okay";
122
123			phy1: ethernet-phy@1 {
124				reg = <1>;
125			};
126		};
127
128		ir@01f02000 {
129			pinctrl-names = "default";
130			pinctrl-0 = <&ir_pins_a>;
131			status = "okay";
132		};
133	};
134
135	leds {
136		compatible = "gpio-leds";
137		pinctrl-names = "default";
138		pinctrl-0 = <&led_pins_m9>;
139
140		blue {
141			label = "m9:blue:usr";
142			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
143		};
144	};
145
146	reg_usb1_vbus: usb1-vbus {
147		pinctrl-names = "default";
148		pinctrl-0 = <&usb1_vbus_pin_m9>;
149		gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
150		status = "okay";
151	};
152};
153