spear3xx.dtsi revision 284090 
1/*
2 * DTS file for all SPEAr3xx SoCs
3 *
4 * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14/include/ "skeleton.dtsi"
15
16/ {
17	interrupt-parent = <&vic>;
18
19	cpus {
20		#address-cells = <0>;
21		#size-cells = <0>;
22
23		cpu {
24			compatible = "arm,arm926ej-s";
25			device_type = "cpu";
26		};
27	};
28
29	memory {
30		device_type = "memory";
31		reg = <0 0x40000000>;
32	};
33
34	ahb {
35		#address-cells = <1>;
36		#size-cells = <1>;
37		compatible = "simple-bus";
38		ranges = <0xd0000000 0xd0000000 0x30000000>;
39
40		vic: interrupt-controller@f1100000 {
41			compatible = "arm,pl190-vic";
42			interrupt-controller;
43			reg = <0xf1100000 0x1000>;
44			#interrupt-cells = <1>;
45		};
46
47		dma@fc400000 {
48			compatible = "arm,pl080", "arm,primecell";
49			reg = <0xfc400000 0x1000>;
50			interrupt-parent = <&vic>;
51			interrupts = <8>;
52			status = "disabled";
53		};
54
55		gmac: eth@e0800000 {
56			compatible = "st,spear600-gmac";
57			reg = <0xe0800000 0x8000>;
58			interrupts = <23 22>;
59			interrupt-names = "macirq", "eth_wake_irq";
60			phy-mode = "mii";
61			status = "disabled";
62		};
63
64		smi: flash@fc000000 {
65			compatible = "st,spear600-smi";
66			#address-cells = <1>;
67			#size-cells = <1>;
68			reg = <0xfc000000 0x1000>;
69			interrupts = <9>;
70			status = "disabled";
71		};
72
73		spi0: spi@d0100000 {
74			compatible = "arm,pl022", "arm,primecell";
75			reg = <0xd0100000 0x1000>;
76			interrupts = <20>;
77			#address-cells = <1>;
78			#size-cells = <0>;
79			status = "disabled";
80		};
81
82		ehci@e1800000 {
83			compatible = "st,spear600-ehci", "usb-ehci";
84			reg = <0xe1800000 0x1000>;
85			interrupts = <26>;
86			status = "disabled";
87		};
88
89		ohci@e1900000 {
90			compatible = "st,spear600-ohci", "usb-ohci";
91			reg = <0xe1900000 0x1000>;
92			interrupts = <25>;
93			status = "disabled";
94		};
95
96		ohci@e2100000 {
97			compatible = "st,spear600-ohci", "usb-ohci";
98			reg = <0xe2100000 0x1000>;
99			interrupts = <27>;
100			status = "disabled";
101		};
102
103		apb {
104			#address-cells = <1>;
105			#size-cells = <1>;
106			compatible = "simple-bus";
107			ranges = <0xd0000000 0xd0000000 0x30000000>;
108
109			gpio0: gpio@fc980000 {
110				compatible = "arm,pl061", "arm,primecell";
111				reg = <0xfc980000 0x1000>;
112				interrupts = <11>;
113				gpio-controller;
114				#gpio-cells = <2>;
115				interrupt-controller;
116				#interrupt-cells = <2>;
117				status = "disabled";
118			};
119
120			i2c0: i2c@d0180000 {
121				#address-cells = <1>;
122				#size-cells = <0>;
123				compatible = "snps,designware-i2c";
124				reg = <0xd0180000 0x1000>;
125				interrupts = <21>;
126				status = "disabled";
127			};
128
129			rtc@fc900000 {
130				compatible = "st,spear600-rtc";
131				reg = <0xfc900000 0x1000>;
132				interrupts = <10>;
133				status = "disabled";
134			};
135
136			serial@d0000000 {
137				compatible = "arm,pl011", "arm,primecell";
138				reg = <0xd0000000 0x1000>;
139				interrupts = <19>;
140				status = "disabled";
141			};
142
143			wdt@fc880000 {
144				compatible = "arm,sp805", "arm,primecell";
145				reg = <0xfc880000 0x1000>;
146				interrupts = <12>;
147				status = "disabled";
148			};
149
150			timer@f0000000 {
151				compatible = "st,spear-timer";
152				reg = <0xf0000000 0x400>;
153				interrupts = <2>;
154			};
155		};
156	};
157};
158