imx6qdl-gw53xx.dtsi revision 284090 
1/*
2 * Copyright 2013 Gateworks Corporation
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <dt-bindings/gpio/gpio.h>
13
14/ {
15	/* these are used by bootloader for disabling nodes */
16	aliases {
17		ethernet1 = &eth1;
18		led0 = &led0;
19		led1 = &led1;
20		led2 = &led2;
21		nand = &gpmi;
22		ssi0 = &ssi1;
23		usb0 = &usbh1;
24		usb1 = &usbotg;
25	};
26
27	chosen {
28		bootargs = "console=ttymxc1,115200";
29	};
30
31	backlight {
32		compatible = "pwm-backlight";
33		pwms = <&pwm4 0 5000000>;
34		brightness-levels = <0 4 8 16 32 64 128 255>;
35		default-brightness-level = <7>;
36	};
37
38	leds {
39		compatible = "gpio-leds";
40		pinctrl-names = "default";
41		pinctrl-0 = <&pinctrl_gpio_leds>;
42
43		led0: user1 {
44			label = "user1";
45			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
46			default-state = "on";
47			linux,default-trigger = "heartbeat";
48		};
49
50		led1: user2 {
51			label = "user2";
52			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
53			default-state = "off";
54		};
55
56		led2: user3 {
57			label = "user3";
58			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
59			default-state = "off";
60		};
61	};
62
63	memory {
64		reg = <0x10000000 0x40000000>;
65	};
66
67	pps {
68		compatible = "pps-gpio";
69		pinctrl-names = "default";
70		pinctrl-0 = <&pinctrl_pps>;
71		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
72		status = "okay";
73	};
74
75	regulators {
76		compatible = "simple-bus";
77		#address-cells = <1>;
78		#size-cells = <0>;
79
80		reg_1p0v: regulator@0 {
81			compatible = "regulator-fixed";
82			reg = <0>;
83			regulator-name = "1P0V";
84			regulator-min-microvolt = <1000000>;
85			regulator-max-microvolt = <1000000>;
86			regulator-always-on;
87		};
88
89		/* remove when pmic 1p8 regulator available */
90		reg_1p8v: regulator@1 {
91			compatible = "regulator-fixed";
92			reg = <1>;
93			regulator-name = "1P8V";
94			regulator-min-microvolt = <1800000>;
95			regulator-max-microvolt = <1800000>;
96			regulator-always-on;
97		};
98
99		reg_3p3v: regulator@2 {
100			compatible = "regulator-fixed";
101			reg = <2>;
102			regulator-name = "3P3V";
103			regulator-min-microvolt = <3300000>;
104			regulator-max-microvolt = <3300000>;
105			regulator-always-on;
106		};
107
108		reg_usb_h1_vbus: regulator@3 {
109			compatible = "regulator-fixed";
110			reg = <3>;
111			regulator-name = "usb_h1_vbus";
112			regulator-min-microvolt = <5000000>;
113			regulator-max-microvolt = <5000000>;
114			regulator-always-on;
115		};
116
117		reg_usb_otg_vbus: regulator@4 {
118			compatible = "regulator-fixed";
119			reg = <4>;
120			regulator-name = "usb_otg_vbus";
121			regulator-min-microvolt = <5000000>;
122			regulator-max-microvolt = <5000000>;
123			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
124			enable-active-high;
125		};
126	};
127
128	sound {
129		compatible = "fsl,imx6q-ventana-sgtl5000",
130			     "fsl,imx-audio-sgtl5000";
131		model = "sgtl5000-audio";
132		ssi-controller = <&ssi1>;
133		audio-codec = <&codec>;
134		audio-routing =
135			"MIC_IN", "Mic Jack",
136			"Mic Jack", "Mic Bias",
137			"Headphone Jack", "HP_OUT";
138		mux-int-port = <1>;
139		mux-ext-port = <4>;
140	};
141};
142
143&audmux {
144	pinctrl-names = "default";
145	pinctrl-0 = <&pinctrl_audmux>;
146	status = "okay";
147};
148
149&can1 {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pinctrl_flexcan1>;
152	status = "okay";
153};
154
155&fec {
156	pinctrl-names = "default";
157	pinctrl-0 = <&pinctrl_enet>;
158	phy-mode = "rgmii";
159	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
160	status = "okay";
161};
162
163&gpmi {
164	pinctrl-names = "default";
165	pinctrl-0 = <&pinctrl_gpmi_nand>;
166	status = "okay";
167};
168
169&hdmi {
170	ddc-i2c-bus = <&i2c3>;
171	status = "okay";
172};
173
174&i2c1 {
175	clock-frequency = <100000>;
176	pinctrl-names = "default";
177	pinctrl-0 = <&pinctrl_i2c1>;
178	status = "okay";
179
180	eeprom1: eeprom@50 {
181		compatible = "atmel,24c02";
182		reg = <0x50>;
183		pagesize = <16>;
184	};
185
186	eeprom2: eeprom@51 {
187		compatible = "atmel,24c02";
188		reg = <0x51>;
189		pagesize = <16>;
190	};
191
192	eeprom3: eeprom@52 {
193		compatible = "atmel,24c02";
194		reg = <0x52>;
195		pagesize = <16>;
196	};
197
198	eeprom4: eeprom@53 {
199		compatible = "atmel,24c02";
200		reg = <0x53>;
201		pagesize = <16>;
202	};
203
204	gpio: pca9555@23 {
205		compatible = "nxp,pca9555";
206		reg = <0x23>;
207		gpio-controller;
208		#gpio-cells = <2>;
209	};
210
211	rtc: ds1672@68 {
212		compatible = "dallas,ds1672";
213		reg = <0x68>;
214	};
215};
216
217&i2c2 {
218	clock-frequency = <100000>;
219	pinctrl-names = "default";
220	pinctrl-0 = <&pinctrl_i2c2>;
221	status = "okay";
222};
223
224&i2c3 {
225	clock-frequency = <100000>;
226	pinctrl-names = "default";
227	pinctrl-0 = <&pinctrl_i2c3>;
228	status = "okay";
229
230	codec: sgtl5000@0a {
231		compatible = "fsl,sgtl5000";
232		reg = <0x0a>;
233		clocks = <&clks 201>;
234		VDDA-supply = <&reg_1p8v>;
235		VDDIO-supply = <&reg_3p3v>;
236	};
237
238	touchscreen: egalax_ts@04 {
239		compatible = "eeti,egalax_ts";
240		reg = <0x04>;
241		interrupt-parent = <&gpio1>;
242		interrupts = <11 2>;
243		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
244	};
245};
246
247&ldb {
248	status = "okay";
249
250	lvds-channel@1 {
251		fsl,data-mapping = "spwg";
252		fsl,data-width = <18>;
253		status = "okay";
254
255		display-timings {
256			native-mode = <&timing0>;
257			timing0: hsd100pxn1 {
258				clock-frequency = <65000000>;
259				hactive = <1024>;
260				vactive = <768>;
261				hback-porch = <220>;
262				hfront-porch = <40>;
263				vback-porch = <21>;
264				vfront-porch = <7>;
265				hsync-len = <60>;
266				vsync-len = <10>;
267			};
268		};
269	};
270};
271
272&pcie {
273	pinctrl-names = "default";
274	pinctrl-0 = <&pinctrl_pcie>;
275	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
276	status = "okay";
277
278	eth1: sky2@8 { /* MAC/PHY on bus 8 */
279		compatible = "marvell,sky2";
280	};
281};
282
283&pwm4 {
284	pinctrl-names = "default";
285	pinctrl-0 = <&pinctrl_pwm4>;
286	status = "okay";
287};
288
289&ssi1 {
290	status = "okay";
291};
292
293&uart1 {
294	pinctrl-names = "default";
295	pinctrl-0 = <&pinctrl_uart1>;
296	status = "okay";
297};
298
299&uart2 {
300	pinctrl-names = "default";
301	pinctrl-0 = <&pinctrl_uart2>;
302	status = "okay";
303};
304
305&uart5 {
306	pinctrl-names = "default";
307	pinctrl-0 = <&pinctrl_uart5>;
308	status = "okay";
309};
310
311&usbotg {
312	vbus-supply = <&reg_usb_otg_vbus>;
313	pinctrl-names = "default";
314	pinctrl-0 = <&pinctrl_usbotg>;
315	disable-over-current;
316	status = "okay";
317};
318
319&usbh1 {
320	vbus-supply = <&reg_usb_h1_vbus>;
321	status = "okay";
322};
323
324&usdhc3 {
325	pinctrl-names = "default";
326	pinctrl-0 = <&pinctrl_usdhc3>;
327	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
328	vmmc-supply = <&reg_3p3v>;
329	status = "okay";
330};
331
332&iomuxc {
333	imx6qdl-gw53xx {
334		pinctrl_audmux: audmuxgrp {
335			fsl,pins = <
336				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
337				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
338				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
339				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
340				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
341			>;
342		};
343
344		pinctrl_enet: enetgrp {
345			fsl,pins = <
346				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
347				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
348				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
349				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
350				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
351				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
352				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
353				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
354				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
355				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
356				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
357				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
358				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
359				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
360				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
361				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
362			>;
363		};
364
365		pinctrl_flexcan1: flexcan1grp {
366			fsl,pins = <
367				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
368				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
369				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
370			>;
371		};
372
373		pinctrl_gpio_leds: gpioledsgrp {
374			fsl,pins = <
375				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
376				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
377				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
378			>;
379		};
380
381		pinctrl_gpmi_nand: gpminandgrp {
382			fsl,pins = <
383				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
384				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
385				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
386				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
387				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
388				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
389				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
390				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
391				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
392				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
393				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
394				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
395				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
396				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
397				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
398				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
399			>;
400		};
401
402		pinctrl_i2c1: i2c1grp {
403			fsl,pins = <
404				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
405				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
406			>;
407		};
408
409		pinctrl_i2c2: i2c2grp {
410			fsl,pins = <
411				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
412				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
413			>;
414		};
415
416		pinctrl_i2c3: i2c3grp {
417			fsl,pins = <
418				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
419				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
420			>;
421		};
422
423		pinctrl_pcie: pciegrp {
424			fsl,pins = <
425				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
426				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
427			>;
428		};
429
430		pinctrl_pps: ppsgrp {
431			fsl,pins = <
432				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
433			>;
434		};
435
436		pinctrl_pwm4: pwm4grp {
437			fsl,pins = <
438				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
439			>;
440		};
441
442		pinctrl_uart1: uart1grp {
443			fsl,pins = <
444				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
445				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
446			>;
447		};
448
449		pinctrl_uart2: uart2grp {
450			fsl,pins = <
451				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
452				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
453			>;
454		};
455
456		pinctrl_uart5: uart5grp {
457			fsl,pins = <
458				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
459				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
460			>;
461		};
462
463		pinctrl_usbotg: usbotggrp {
464			fsl,pins = <
465				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
466				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
467				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
468			>;
469		};
470
471		pinctrl_usdhc3: usdhc3grp {
472			fsl,pins = <
473				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
474				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
475				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
476				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
477				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
478				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
479				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
480			>;
481		};
482	};
483};
484