usbdi.h revision 287274
1/*- 2 * Copyright (c) 2009 Andrew Thompson 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 19 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 20 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 23 * 24 * $FreeBSD: stable/10/sys/dev/usb/usbdi.h 287274 2015-08-29 06:23:40Z hselasky $ 25 */ 26#ifndef _USB_USBDI_H_ 27#define _USB_USBDI_H_ 28 29struct usb_fifo; 30struct usb_xfer; 31struct usb_device; 32struct usb_attach_arg; 33struct usb_interface; 34struct usb_endpoint; 35struct usb_page_cache; 36struct usb_page_search; 37struct usb_process; 38struct usb_proc_msg; 39struct usb_mbuf; 40struct usb_fs_privdata; 41struct mbuf; 42 43typedef enum { /* keep in sync with usb_errstr_table */ 44 USB_ERR_NORMAL_COMPLETION = 0, 45 USB_ERR_PENDING_REQUESTS, /* 1 */ 46 USB_ERR_NOT_STARTED, /* 2 */ 47 USB_ERR_INVAL, /* 3 */ 48 USB_ERR_NOMEM, /* 4 */ 49 USB_ERR_CANCELLED, /* 5 */ 50 USB_ERR_BAD_ADDRESS, /* 6 */ 51 USB_ERR_BAD_BUFSIZE, /* 7 */ 52 USB_ERR_BAD_FLAG, /* 8 */ 53 USB_ERR_NO_CALLBACK, /* 9 */ 54 USB_ERR_IN_USE, /* 10 */ 55 USB_ERR_NO_ADDR, /* 11 */ 56 USB_ERR_NO_PIPE, /* 12 */ 57 USB_ERR_ZERO_NFRAMES, /* 13 */ 58 USB_ERR_ZERO_MAXP, /* 14 */ 59 USB_ERR_SET_ADDR_FAILED, /* 15 */ 60 USB_ERR_NO_POWER, /* 16 */ 61 USB_ERR_TOO_DEEP, /* 17 */ 62 USB_ERR_IOERROR, /* 18 */ 63 USB_ERR_NOT_CONFIGURED, /* 19 */ 64 USB_ERR_TIMEOUT, /* 20 */ 65 USB_ERR_SHORT_XFER, /* 21 */ 66 USB_ERR_STALLED, /* 22 */ 67 USB_ERR_INTERRUPTED, /* 23 */ 68 USB_ERR_DMA_LOAD_FAILED, /* 24 */ 69 USB_ERR_BAD_CONTEXT, /* 25 */ 70 USB_ERR_NO_ROOT_HUB, /* 26 */ 71 USB_ERR_NO_INTR_THREAD, /* 27 */ 72 USB_ERR_NOT_LOCKED, /* 28 */ 73 USB_ERR_MAX 74} usb_error_t; 75 76/* 77 * Flags for transfers 78 */ 79#define USB_FORCE_SHORT_XFER 0x0001 /* force a short transmit last */ 80#define USB_SHORT_XFER_OK 0x0004 /* allow short reads */ 81#define USB_DELAY_STATUS_STAGE 0x0010 /* insert delay before STATUS stage */ 82#define USB_USER_DATA_PTR 0x0020 /* internal flag */ 83#define USB_MULTI_SHORT_OK 0x0040 /* allow multiple short frames */ 84#define USB_MANUAL_STATUS 0x0080 /* manual ctrl status */ 85 86#define USB_NO_TIMEOUT 0 87#define USB_DEFAULT_TIMEOUT 5000 /* 5000 ms = 5 seconds */ 88 89#if defined(_KERNEL) 90/* typedefs */ 91 92typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t); 93typedef void (usb_proc_callback_t)(struct usb_proc_msg *); 94typedef usb_error_t (usb_handle_req_t)(struct usb_device *, 95 struct usb_device_request *, const void **, uint16_t *); 96 97typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags); 98typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags); 99typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags); 100typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo); 101typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m); 102 103 104/* USB events */ 105#ifndef USB_GLOBAL_INCLUDE_FILE 106#include <sys/eventhandler.h> 107#endif 108typedef void (*usb_dev_configured_t)(void *, struct usb_device *, 109 struct usb_attach_arg *); 110EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t); 111 112/* 113 * The following macros are used used to convert milliseconds into 114 * HZ. We use 1024 instead of 1000 milliseconds per second to save a 115 * full division. 116 */ 117#define USB_MS_HZ 1024 118 119#define USB_MS_TO_TICKS(ms) \ 120 (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ) 121 122/* 123 * Common queue structure for USB transfers. 124 */ 125struct usb_xfer_queue { 126 TAILQ_HEAD(, usb_xfer) head; 127 struct usb_xfer *curr; /* current USB transfer processed */ 128 void (*command) (struct usb_xfer_queue *pq); 129 uint8_t recurse_1:1; 130 uint8_t recurse_2:1; 131 uint8_t recurse_3:1; 132 uint8_t reserved:5; 133}; 134 135/* 136 * The following structure defines an USB endpoint 137 * USB endpoint. 138 */ 139struct usb_endpoint { 140 /* queue of USB transfers */ 141 struct usb_xfer_queue endpoint_q[USB_MAX_EP_STREAMS]; 142 143 struct usb_endpoint_descriptor *edesc; 144 struct usb_endpoint_ss_comp_descriptor *ecomp; 145 struct usb_pipe_methods *methods; /* set by HC driver */ 146 147 uint16_t isoc_next; 148 149 uint8_t toggle_next:1; /* next data toggle value */ 150 uint8_t is_stalled:1; /* set if endpoint is stalled */ 151 uint8_t is_synced:1; /* set if we a synchronised */ 152 uint8_t unused:5; 153 uint8_t iface_index; /* not used by "default endpoint" */ 154 155 uint8_t refcount_alloc; /* allocation refcount */ 156 uint8_t refcount_bw; /* bandwidth refcount */ 157#define USB_EP_REF_MAX 0x3f 158 159 /* High-Speed resource allocation (valid if "refcount_bw" > 0) */ 160 161 uint8_t usb_smask; /* USB start mask */ 162 uint8_t usb_cmask; /* USB complete mask */ 163 uint8_t usb_uframe; /* USB microframe */ 164 165 /* USB endpoint mode, see USB_EP_MODE_XXX */ 166 167 uint8_t ep_mode; 168}; 169 170/* 171 * The following structure defines an USB interface. 172 */ 173struct usb_interface { 174 struct usb_interface_descriptor *idesc; 175 device_t subdev; 176 uint8_t alt_index; 177 uint8_t parent_iface_index; 178 179 /* Linux compat */ 180 struct usb_host_interface *altsetting; 181 struct usb_host_interface *cur_altsetting; 182 struct usb_device *linux_udev; 183 void *bsd_priv_sc; /* device specific information */ 184 char *pnpinfo; /* additional PnP-info for this interface */ 185 uint8_t num_altsetting; /* number of alternate settings */ 186 uint8_t bsd_iface_index; 187}; 188 189/* 190 * The following structure defines a set of USB transfer flags. 191 */ 192struct usb_xfer_flags { 193 uint8_t force_short_xfer:1; /* force a short transmit transfer 194 * last */ 195 uint8_t short_xfer_ok:1; /* allow short receive transfers */ 196 uint8_t short_frames_ok:1; /* allow short frames */ 197 uint8_t pipe_bof:1; /* block pipe on failure */ 198 uint8_t proxy_buffer:1; /* makes buffer size a factor of 199 * "max_frame_size" */ 200 uint8_t ext_buffer:1; /* uses external DMA buffer */ 201 uint8_t manual_status:1; /* non automatic status stage on 202 * control transfers */ 203 uint8_t no_pipe_ok:1; /* set if "USB_ERR_NO_PIPE" error can 204 * be ignored */ 205 uint8_t stall_pipe:1; /* set if the endpoint belonging to 206 * this USB transfer should be stalled 207 * before starting this transfer! */ 208 uint8_t pre_scale_frames:1; /* "usb_config->frames" is 209 * assumed to give the 210 * buffering time in 211 * milliseconds and is 212 * converted into the nearest 213 * number of frames when the 214 * USB transfer is setup. This 215 * option only has effect for 216 * ISOCHRONOUS transfers. 217 */ 218}; 219 220/* 221 * The following structure define an USB configuration, that basically 222 * is used when setting up an USB transfer. 223 */ 224struct usb_config { 225 usb_callback_t *callback; /* USB transfer callback */ 226 usb_frlength_t bufsize; /* total pipe buffer size in bytes */ 227 usb_frcount_t frames; /* maximum number of USB frames */ 228 usb_timeout_t interval; /* interval in milliseconds */ 229#define USB_DEFAULT_INTERVAL 0 230 usb_timeout_t timeout; /* transfer timeout in milliseconds */ 231 struct usb_xfer_flags flags; /* transfer flags */ 232 usb_stream_t stream_id; /* USB3.0 specific */ 233 enum usb_hc_mode usb_mode; /* host or device mode */ 234 uint8_t type; /* pipe type */ 235 uint8_t endpoint; /* pipe number */ 236 uint8_t direction; /* pipe direction */ 237 uint8_t ep_index; /* pipe index match to use */ 238 uint8_t if_index; /* "ifaces" index to use */ 239}; 240 241/* 242 * Use these macro when defining USB device ID arrays if you want to 243 * have your driver module automatically loaded in host, device or 244 * both modes respectivly: 245 */ 246#if USB_HAVE_ID_SECTION 247#define STRUCT_USB_HOST_ID \ 248 struct usb_device_id __section("usb_host_id") 249#define STRUCT_USB_DEVICE_ID \ 250 struct usb_device_id __section("usb_device_id") 251#define STRUCT_USB_DUAL_ID \ 252 struct usb_device_id __section("usb_dual_id") 253#else 254#define STRUCT_USB_HOST_ID \ 255 struct usb_device_id 256#define STRUCT_USB_DEVICE_ID \ 257 struct usb_device_id 258#define STRUCT_USB_DUAL_ID \ 259 struct usb_device_id 260#endif /* USB_HAVE_ID_SECTION */ 261 262/* 263 * The following structure is used when looking up an USB driver for 264 * an USB device. It is inspired by the Linux structure called 265 * "usb_device_id". 266 */ 267struct usb_device_id { 268 269 /* Hook for driver specific information */ 270 unsigned long driver_info; 271 272 /* Used for product specific matches; the BCD range is inclusive */ 273 uint16_t idVendor; 274 uint16_t idProduct; 275 uint16_t bcdDevice_lo; 276 uint16_t bcdDevice_hi; 277 278 /* Used for device class matches */ 279 uint8_t bDeviceClass; 280 uint8_t bDeviceSubClass; 281 uint8_t bDeviceProtocol; 282 283 /* Used for interface class matches */ 284 uint8_t bInterfaceClass; 285 uint8_t bInterfaceSubClass; 286 uint8_t bInterfaceProtocol; 287 288 /* Select which fields to match against */ 289 uint8_t match_flag_vendor:1; 290 uint8_t match_flag_product:1; 291 uint8_t match_flag_dev_lo:1; 292 uint8_t match_flag_dev_hi:1; 293 294 uint8_t match_flag_dev_class:1; 295 uint8_t match_flag_dev_subclass:1; 296 uint8_t match_flag_dev_protocol:1; 297 uint8_t match_flag_int_class:1; 298 299 uint8_t match_flag_int_subclass:1; 300 uint8_t match_flag_int_protocol:1; 301 uint8_t match_flag_unused:6; 302 303#if USB_HAVE_COMPAT_LINUX 304 /* which fields to match against */ 305 uint16_t match_flags; 306#define USB_DEVICE_ID_MATCH_VENDOR 0x0001 307#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 308#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 309#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 310#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 311#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 312#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 313#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 314#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 315#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 316#endif 317} __aligned(32); 318 319/* check that the size of the structure above is correct */ 320extern char usb_device_id_assert[(sizeof(struct usb_device_id) == 32) ? 1 : -1]; 321 322#define USB_VENDOR(vend) \ 323 .match_flag_vendor = 1, .idVendor = (vend) 324 325#define USB_PRODUCT(prod) \ 326 .match_flag_product = 1, .idProduct = (prod) 327 328#define USB_VP(vend,prod) \ 329 USB_VENDOR(vend), USB_PRODUCT(prod) 330 331#define USB_VPI(vend,prod,info) \ 332 USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info) 333 334#define USB_DEV_BCD_GTEQ(lo) /* greater than or equal */ \ 335 .match_flag_dev_lo = 1, .bcdDevice_lo = (lo) 336 337#define USB_DEV_BCD_LTEQ(hi) /* less than or equal */ \ 338 .match_flag_dev_hi = 1, .bcdDevice_hi = (hi) 339 340#define USB_DEV_CLASS(dc) \ 341 .match_flag_dev_class = 1, .bDeviceClass = (dc) 342 343#define USB_DEV_SUBCLASS(dsc) \ 344 .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc) 345 346#define USB_DEV_PROTOCOL(dp) \ 347 .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp) 348 349#define USB_IFACE_CLASS(ic) \ 350 .match_flag_int_class = 1, .bInterfaceClass = (ic) 351 352#define USB_IFACE_SUBCLASS(isc) \ 353 .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc) 354 355#define USB_IFACE_PROTOCOL(ip) \ 356 .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip) 357 358#define USB_IF_CSI(class,subclass,info) \ 359 USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info) 360 361#define USB_DRIVER_INFO(n) \ 362 .driver_info = (n) 363 364#define USB_GET_DRIVER_INFO(did) \ 365 (did)->driver_info 366 367/* 368 * The following structure keeps information that is used to match 369 * against an array of "usb_device_id" elements. 370 */ 371struct usbd_lookup_info { 372 uint16_t idVendor; 373 uint16_t idProduct; 374 uint16_t bcdDevice; 375 uint8_t bDeviceClass; 376 uint8_t bDeviceSubClass; 377 uint8_t bDeviceProtocol; 378 uint8_t bInterfaceClass; 379 uint8_t bInterfaceSubClass; 380 uint8_t bInterfaceProtocol; 381 uint8_t bIfaceIndex; 382 uint8_t bIfaceNum; 383 uint8_t bConfigIndex; 384 uint8_t bConfigNum; 385}; 386 387/* Structure used by probe and attach */ 388 389struct usb_attach_arg { 390 struct usbd_lookup_info info; 391 device_t temp_dev; /* for internal use */ 392 unsigned long driver_info; /* for internal use */ 393 void *driver_ivar; 394 struct usb_device *device; /* current device */ 395 struct usb_interface *iface; /* current interface */ 396 enum usb_hc_mode usb_mode; /* host or device mode */ 397 uint8_t port; 398 uint8_t dev_state; 399#define UAA_DEV_READY 0 400#define UAA_DEV_DISABLED 1 401#define UAA_DEV_EJECTING 2 402}; 403 404/* 405 * The following is a wrapper for the callout structure to ease 406 * porting the code to other platforms. 407 */ 408struct usb_callout { 409 struct callout co; 410}; 411#define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f) 412#define usb_callout_reset(c,t,f,d) callout_reset(&(c)->co,t,f,d) 413#define usb_callout_stop(c) callout_stop(&(c)->co) 414#define usb_callout_drain(c) callout_drain(&(c)->co) 415#define usb_callout_pending(c) callout_pending(&(c)->co) 416 417/* USB transfer states */ 418 419#define USB_ST_SETUP 0 420#define USB_ST_TRANSFERRED 1 421#define USB_ST_ERROR 2 422 423/* USB handle request states */ 424#define USB_HR_NOT_COMPLETE 0 425#define USB_HR_COMPLETE_OK 1 426#define USB_HR_COMPLETE_ERR 2 427 428/* 429 * The following macro will return the current state of an USB 430 * transfer like defined by the "USB_ST_XXX" enums. 431 */ 432#define USB_GET_STATE(xfer) (usbd_xfer_state(xfer)) 433 434/* 435 * The following structure defines the USB process message header. 436 */ 437struct usb_proc_msg { 438 TAILQ_ENTRY(usb_proc_msg) pm_qentry; 439 usb_proc_callback_t *pm_callback; 440 usb_size_t pm_num; 441}; 442 443#define USB_FIFO_TX 0 444#define USB_FIFO_RX 1 445 446/* 447 * Locking note for the following functions. All the 448 * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called 449 * locked. The others are called unlocked. 450 */ 451struct usb_fifo_methods { 452 usb_fifo_open_t *f_open; 453 usb_fifo_close_t *f_close; 454 usb_fifo_ioctl_t *f_ioctl; 455 /* 456 * NOTE: The post-ioctl callback is called after the USB reference 457 * gets locked in the IOCTL handler: 458 */ 459 usb_fifo_ioctl_t *f_ioctl_post; 460 usb_fifo_cmd_t *f_start_read; 461 usb_fifo_cmd_t *f_stop_read; 462 usb_fifo_cmd_t *f_start_write; 463 usb_fifo_cmd_t *f_stop_write; 464 usb_fifo_filter_t *f_filter_read; 465 usb_fifo_filter_t *f_filter_write; 466 const char *basename[4]; 467 const char *postfix[4]; 468}; 469 470struct usb_fifo_sc { 471 struct usb_fifo *fp[2]; 472 struct usb_fs_privdata *dev; 473}; 474 475const char *usbd_errstr(usb_error_t error); 476void *usbd_find_descriptor(struct usb_device *udev, void *id, 477 uint8_t iface_index, uint8_t type, uint8_t type_mask, 478 uint8_t subtype, uint8_t subtype_mask); 479struct usb_config_descriptor *usbd_get_config_descriptor( 480 struct usb_device *udev); 481struct usb_device_descriptor *usbd_get_device_descriptor( 482 struct usb_device *udev); 483struct usb_interface *usbd_get_iface(struct usb_device *udev, 484 uint8_t iface_index); 485struct usb_interface_descriptor *usbd_get_interface_descriptor( 486 struct usb_interface *iface); 487struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 488 const struct usb_config *setup); 489struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val); 490usb_error_t usbd_interface_count(struct usb_device *udev, uint8_t *count); 491enum usb_hc_mode usbd_get_mode(struct usb_device *udev); 492enum usb_dev_speed usbd_get_speed(struct usb_device *udev); 493void device_set_usb_desc(device_t dev); 494void usb_pause_mtx(struct mtx *mtx, int _ticks); 495usb_error_t usbd_set_pnpinfo(struct usb_device *udev, 496 uint8_t iface_index, const char *pnpinfo); 497usb_error_t usbd_add_dynamic_quirk(struct usb_device *udev, 498 uint16_t quirk); 499usb_error_t usbd_set_endpoint_mode(struct usb_device *udev, 500 struct usb_endpoint *ep, uint8_t ep_mode); 501uint8_t usbd_get_endpoint_mode(struct usb_device *udev, 502 struct usb_endpoint *ep); 503 504const struct usb_device_id *usbd_lookup_id_by_info( 505 const struct usb_device_id *id, usb_size_t sizeof_id, 506 const struct usbd_lookup_info *info); 507int usbd_lookup_id_by_uaa(const struct usb_device_id *id, 508 usb_size_t sizeof_id, struct usb_attach_arg *uaa); 509 510usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, 511 struct usb_device_request *req, void *data, uint16_t flags, 512 uint16_t *actlen, usb_timeout_t timeout); 513#define usbd_do_request(u,m,r,d) \ 514 usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT) 515 516uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1, 517 struct usb_xfer *xfer2); 518uint8_t usbd_get_interface_altindex(struct usb_interface *iface); 519usb_error_t usbd_set_alt_interface_index(struct usb_device *udev, 520 uint8_t iface_index, uint8_t alt_index); 521uint32_t usbd_get_isoc_fps(struct usb_device *udev); 522usb_error_t usbd_transfer_setup(struct usb_device *udev, 523 const uint8_t *ifaces, struct usb_xfer **pxfer, 524 const struct usb_config *setup_start, uint16_t n_setup, 525 void *priv_sc, struct mtx *priv_mtx); 526void usbd_transfer_submit(struct usb_xfer *xfer); 527void usbd_transfer_clear_stall(struct usb_xfer *xfer); 528void usbd_transfer_drain(struct usb_xfer *xfer); 529uint8_t usbd_transfer_pending(struct usb_xfer *xfer); 530void usbd_transfer_start(struct usb_xfer *xfer); 531void usbd_transfer_stop(struct usb_xfer *xfer); 532void usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup); 533void usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max); 534void usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 535 uint8_t parent_index); 536uint8_t usbd_get_bus_index(struct usb_device *udev); 537uint8_t usbd_get_device_index(struct usb_device *udev); 538void usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode); 539uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode); 540uint8_t usbd_device_attached(struct usb_device *udev); 541 542usb_frlength_t 543 usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex); 544void usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen, 545 int *aframes, int *nframes); 546struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *, usb_frcount_t); 547void *usbd_xfer_get_frame_buffer(struct usb_xfer *, usb_frcount_t); 548void *usbd_xfer_softc(struct usb_xfer *xfer); 549void *usbd_xfer_get_priv(struct usb_xfer *xfer); 550void usbd_xfer_set_priv(struct usb_xfer *xfer, void *); 551void usbd_xfer_set_interval(struct usb_xfer *xfer, int); 552uint8_t usbd_xfer_state(struct usb_xfer *xfer); 553void usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 554 void *ptr, usb_frlength_t len); 555void usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 556 void **ptr, int *len); 557void usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset, 558 usb_frcount_t frindex); 559usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer); 560usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer); 561usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer); 562uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer); 563usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer, 564 usb_frcount_t frindex); 565void usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex, 566 usb_frlength_t len); 567void usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout); 568void usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n); 569void usbd_xfer_set_stall(struct usb_xfer *xfer); 570int usbd_xfer_is_stalled(struct usb_xfer *xfer); 571void usbd_xfer_set_flag(struct usb_xfer *xfer, int flag); 572void usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag); 573uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer); 574uint8_t usbd_xfer_maxp_was_clamped(struct usb_xfer *xfer); 575 576void usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset, 577 const void *ptr, usb_frlength_t len); 578int usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset, 579 const void *ptr, usb_frlength_t len); 580void usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset, 581 void *ptr, usb_frlength_t len); 582int usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset, 583 void *ptr, usb_frlength_t len); 584void usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset, 585 struct usb_page_search *res); 586void usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset, 587 struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len); 588void usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset, 589 usb_frlength_t len); 590void usbd_start_re_enumerate(struct usb_device *udev); 591usb_error_t 592 usbd_start_set_config(struct usb_device *, uint8_t); 593 594int usb_fifo_attach(struct usb_device *udev, void *priv_sc, 595 struct mtx *priv_mtx, struct usb_fifo_methods *pm, 596 struct usb_fifo_sc *f_sc, uint16_t unit, int16_t subunit, 597 uint8_t iface_index, uid_t uid, gid_t gid, int mode); 598void usb_fifo_detach(struct usb_fifo_sc *f_sc); 599int usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize, 600 uint16_t nbuf); 601void usb_fifo_free_buffer(struct usb_fifo *f); 602uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo); 603void usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc, 604 usb_frlength_t offset, usb_frlength_t len, uint8_t what); 605void usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr, 606 usb_size_t len, uint8_t what); 607uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len); 608void usb_fifo_put_data_error(struct usb_fifo *fifo); 609uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc, 610 usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen, 611 uint8_t what); 612uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr, 613 usb_size_t len, usb_size_t *actlen, uint8_t what); 614uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr, 615 usb_size_t *plen); 616void usb_fifo_reset(struct usb_fifo *f); 617void usb_fifo_wakeup(struct usb_fifo *f); 618void usb_fifo_get_data_error(struct usb_fifo *fifo); 619void *usb_fifo_softc(struct usb_fifo *fifo); 620void usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t); 621void usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t); 622void usb_fifo_free(struct usb_fifo *f); 623#endif /* _KERNEL */ 624#endif /* _USB_USBDI_H_ */ 625