mlx5_en_ethtool.c revision 322007
1/*-
2 * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 *    notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 *    notice, this list of conditions and the following disclaimer in the
11 *    documentation and/or other materials provided with the distribution.
12 *
13 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS `AS IS' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 * SUCH DAMAGE.
24 *
25 * $FreeBSD: stable/10/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c 322007 2017-08-03 14:14:13Z hselasky $
26 */
27
28#include "en.h"
29#include <net/sff8472.h>
30
31void
32mlx5e_create_stats(struct sysctl_ctx_list *ctx,
33    struct sysctl_oid_list *parent, const char *buffer,
34    const char **desc, unsigned num, u64 * arg)
35{
36	struct sysctl_oid *node;
37	unsigned x;
38
39	sysctl_ctx_init(ctx);
40
41	node = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO,
42	    buffer, CTLFLAG_RD, NULL, "Statistics");
43	if (node == NULL)
44		return;
45	for (x = 0; x != num; x++) {
46		SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
47		    desc[2 * x], CTLFLAG_RD, arg + x, desc[2 * x + 1]);
48	}
49}
50
51static void
52mlx5e_ethtool_sync_tx_completion_fact(struct mlx5e_priv *priv)
53{
54	/*
55	 * Limit the maximum distance between completion events to
56	 * half of the currently set TX queue size.
57	 *
58	 * The maximum number of queue entries a single IP packet can
59	 * consume is given by MLX5_SEND_WQE_MAX_WQEBBS.
60	 *
61	 * The worst case max value is then given as below:
62	 */
63	uint64_t max = priv->params_ethtool.tx_queue_size /
64	    (2 * MLX5_SEND_WQE_MAX_WQEBBS);
65
66	/*
67	 * Update the maximum completion factor value in case the
68	 * tx_queue_size field changed. Ensure we don't overflow
69	 * 16-bits.
70	 */
71	if (max < 1)
72		max = 1;
73	else if (max > 65535)
74		max = 65535;
75	priv->params_ethtool.tx_completion_fact_max = max;
76
77	/*
78	 * Verify that the current TX completion factor is within the
79	 * given limits:
80	 */
81	if (priv->params_ethtool.tx_completion_fact < 1)
82		priv->params_ethtool.tx_completion_fact = 1;
83	else if (priv->params_ethtool.tx_completion_fact > max)
84		priv->params_ethtool.tx_completion_fact = max;
85}
86
87#define	MLX5_PARAM_OFFSET(n)				\
88    __offsetof(struct mlx5e_priv, params_ethtool.n)
89
90static int
91mlx5e_ethtool_handler(SYSCTL_HANDLER_ARGS)
92{
93	struct mlx5e_priv *priv = arg1;
94	uint64_t value;
95	int mode_modify;
96	int was_opened;
97	int error;
98
99	PRIV_LOCK(priv);
100	value = priv->params_ethtool.arg[arg2];
101	if (req != NULL) {
102		error = sysctl_handle_64(oidp, &value, 0, req);
103		if (error || req->newptr == NULL ||
104		    value == priv->params_ethtool.arg[arg2])
105			goto done;
106
107		/* assign new value */
108		priv->params_ethtool.arg[arg2] = value;
109	} else {
110		error = 0;
111	}
112	/* check if device is gone */
113	if (priv->gone) {
114		error = ENXIO;
115		goto done;
116	}
117	was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state);
118	mode_modify = MLX5_CAP_GEN(priv->mdev, cq_period_mode_modify);
119
120	switch (MLX5_PARAM_OFFSET(arg[arg2])) {
121	case MLX5_PARAM_OFFSET(rx_coalesce_usecs):
122		/* import RX coal time */
123		if (priv->params_ethtool.rx_coalesce_usecs < 1)
124			priv->params_ethtool.rx_coalesce_usecs = 0;
125		else if (priv->params_ethtool.rx_coalesce_usecs >
126		    MLX5E_FLD_MAX(cqc, cq_period)) {
127			priv->params_ethtool.rx_coalesce_usecs =
128			    MLX5E_FLD_MAX(cqc, cq_period);
129		}
130		priv->params.rx_cq_moderation_usec =
131		    priv->params_ethtool.rx_coalesce_usecs;
132
133		/* check to avoid down and up the network interface */
134		if (was_opened)
135			error = mlx5e_refresh_channel_params(priv);
136		break;
137
138	case MLX5_PARAM_OFFSET(rx_coalesce_pkts):
139		/* import RX coal pkts */
140		if (priv->params_ethtool.rx_coalesce_pkts < 1)
141			priv->params_ethtool.rx_coalesce_pkts = 0;
142		else if (priv->params_ethtool.rx_coalesce_pkts >
143		    MLX5E_FLD_MAX(cqc, cq_max_count)) {
144			priv->params_ethtool.rx_coalesce_pkts =
145			    MLX5E_FLD_MAX(cqc, cq_max_count);
146		}
147		priv->params.rx_cq_moderation_pkts =
148		    priv->params_ethtool.rx_coalesce_pkts;
149
150		/* check to avoid down and up the network interface */
151		if (was_opened)
152			error = mlx5e_refresh_channel_params(priv);
153		break;
154
155	case MLX5_PARAM_OFFSET(tx_coalesce_usecs):
156		/* import TX coal time */
157		if (priv->params_ethtool.tx_coalesce_usecs < 1)
158			priv->params_ethtool.tx_coalesce_usecs = 0;
159		else if (priv->params_ethtool.tx_coalesce_usecs >
160		    MLX5E_FLD_MAX(cqc, cq_period)) {
161			priv->params_ethtool.tx_coalesce_usecs =
162			    MLX5E_FLD_MAX(cqc, cq_period);
163		}
164		priv->params.tx_cq_moderation_usec =
165		    priv->params_ethtool.tx_coalesce_usecs;
166
167		/* check to avoid down and up the network interface */
168		if (was_opened)
169			error = mlx5e_refresh_channel_params(priv);
170		break;
171
172	case MLX5_PARAM_OFFSET(tx_coalesce_pkts):
173		/* import TX coal pkts */
174		if (priv->params_ethtool.tx_coalesce_pkts < 1)
175			priv->params_ethtool.tx_coalesce_pkts = 0;
176		else if (priv->params_ethtool.tx_coalesce_pkts >
177		    MLX5E_FLD_MAX(cqc, cq_max_count)) {
178			priv->params_ethtool.tx_coalesce_pkts =
179			    MLX5E_FLD_MAX(cqc, cq_max_count);
180		}
181		priv->params.tx_cq_moderation_pkts =
182		    priv->params_ethtool.tx_coalesce_pkts;
183
184		/* check to avoid down and up the network interface */
185		if (was_opened)
186			error = mlx5e_refresh_channel_params(priv);
187		break;
188
189	case MLX5_PARAM_OFFSET(tx_queue_size):
190		/* network interface must be down */
191		if (was_opened)
192			mlx5e_close_locked(priv->ifp);
193
194		/* import TX queue size */
195		if (priv->params_ethtool.tx_queue_size <
196		    (1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)) {
197			priv->params_ethtool.tx_queue_size =
198			    (1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE);
199		} else if (priv->params_ethtool.tx_queue_size >
200		    priv->params_ethtool.tx_queue_size_max) {
201			priv->params_ethtool.tx_queue_size =
202			    priv->params_ethtool.tx_queue_size_max;
203		}
204		/* store actual TX queue size */
205		priv->params.log_sq_size =
206		    order_base_2(priv->params_ethtool.tx_queue_size);
207		priv->params_ethtool.tx_queue_size =
208		    1 << priv->params.log_sq_size;
209
210		/* verify TX completion factor */
211		mlx5e_ethtool_sync_tx_completion_fact(priv);
212
213		/* restart network interface, if any */
214		if (was_opened)
215			mlx5e_open_locked(priv->ifp);
216		break;
217
218	case MLX5_PARAM_OFFSET(rx_queue_size):
219		/* network interface must be down */
220		if (was_opened)
221			mlx5e_close_locked(priv->ifp);
222
223		/* import RX queue size */
224		if (priv->params_ethtool.rx_queue_size <
225		    (1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)) {
226			priv->params_ethtool.rx_queue_size =
227			    (1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE);
228		} else if (priv->params_ethtool.rx_queue_size >
229		    priv->params_ethtool.rx_queue_size_max) {
230			priv->params_ethtool.rx_queue_size =
231			    priv->params_ethtool.rx_queue_size_max;
232		}
233		/* store actual RX queue size */
234		priv->params.log_rq_size =
235		    order_base_2(priv->params_ethtool.rx_queue_size);
236		priv->params_ethtool.rx_queue_size =
237		    1 << priv->params.log_rq_size;
238
239		/* update least number of RX WQEs */
240		priv->params.min_rx_wqes = min(
241		    priv->params_ethtool.rx_queue_size - 1,
242		    MLX5E_PARAMS_DEFAULT_MIN_RX_WQES);
243
244		/* restart network interface, if any */
245		if (was_opened)
246			mlx5e_open_locked(priv->ifp);
247		break;
248
249	case MLX5_PARAM_OFFSET(channels):
250		/* network interface must be down */
251		if (was_opened)
252			mlx5e_close_locked(priv->ifp);
253
254		/* import number of channels */
255		if (priv->params_ethtool.channels < 1)
256			priv->params_ethtool.channels = 1;
257		else if (priv->params_ethtool.channels >
258		    (u64) priv->mdev->priv.eq_table.num_comp_vectors) {
259			priv->params_ethtool.channels =
260			    (u64) priv->mdev->priv.eq_table.num_comp_vectors;
261		}
262		priv->params.num_channels = priv->params_ethtool.channels;
263
264		/* restart network interface, if any */
265		if (was_opened)
266			mlx5e_open_locked(priv->ifp);
267		break;
268
269	case MLX5_PARAM_OFFSET(rx_coalesce_mode):
270		/* network interface must be down */
271		if (was_opened != 0 && mode_modify == 0)
272			mlx5e_close_locked(priv->ifp);
273
274		/* import RX coalesce mode */
275		if (priv->params_ethtool.rx_coalesce_mode != 0)
276			priv->params_ethtool.rx_coalesce_mode = 1;
277		priv->params.rx_cq_moderation_mode =
278		    priv->params_ethtool.rx_coalesce_mode;
279
280		/* restart network interface, if any */
281		if (was_opened != 0) {
282			if (mode_modify == 0)
283				mlx5e_open_locked(priv->ifp);
284			else
285				error = mlx5e_refresh_channel_params(priv);
286		}
287		break;
288
289	case MLX5_PARAM_OFFSET(tx_coalesce_mode):
290		/* network interface must be down */
291		if (was_opened != 0 && mode_modify == 0)
292			mlx5e_close_locked(priv->ifp);
293
294		/* import TX coalesce mode */
295		if (priv->params_ethtool.tx_coalesce_mode != 0)
296			priv->params_ethtool.tx_coalesce_mode = 1;
297		priv->params.tx_cq_moderation_mode =
298		    priv->params_ethtool.tx_coalesce_mode;
299
300		/* restart network interface, if any */
301		if (was_opened != 0) {
302			if (mode_modify == 0)
303				mlx5e_open_locked(priv->ifp);
304			else
305				error = mlx5e_refresh_channel_params(priv);
306		}
307		break;
308
309	case MLX5_PARAM_OFFSET(hw_lro):
310		/* network interface must be down */
311		if (was_opened)
312			mlx5e_close_locked(priv->ifp);
313
314		/* import HW LRO mode */
315		if (priv->params_ethtool.hw_lro != 0) {
316			if ((priv->ifp->if_capenable & IFCAP_LRO) &&
317			    MLX5_CAP_ETH(priv->mdev, lro_cap)) {
318				priv->params.hw_lro_en = 1;
319				priv->params_ethtool.hw_lro = 1;
320			} else {
321				priv->params.hw_lro_en = 0;
322				priv->params_ethtool.hw_lro = 0;
323				error = EINVAL;
324
325				if_printf(priv->ifp, "Can't enable HW LRO: "
326				    "The HW or SW LRO feature is disabled\n");
327			}
328		} else {
329			priv->params.hw_lro_en = 0;
330		}
331		/* restart network interface, if any */
332		if (was_opened)
333			mlx5e_open_locked(priv->ifp);
334		break;
335
336	case MLX5_PARAM_OFFSET(cqe_zipping):
337		/* network interface must be down */
338		if (was_opened)
339			mlx5e_close_locked(priv->ifp);
340
341		/* import CQE zipping mode */
342		if (priv->params_ethtool.cqe_zipping &&
343		    MLX5_CAP_GEN(priv->mdev, cqe_compression)) {
344			priv->params.cqe_zipping_en = true;
345			priv->params_ethtool.cqe_zipping = 1;
346		} else {
347			priv->params.cqe_zipping_en = false;
348			priv->params_ethtool.cqe_zipping = 0;
349		}
350		/* restart network interface, if any */
351		if (was_opened)
352			mlx5e_open_locked(priv->ifp);
353		break;
354
355	case MLX5_PARAM_OFFSET(tx_bufring_disable):
356		/* rangecheck input value */
357		priv->params_ethtool.tx_bufring_disable =
358		    priv->params_ethtool.tx_bufring_disable ? 1 : 0;
359
360		/* reconfigure the sendqueues, if any */
361		if (was_opened) {
362			mlx5e_close_locked(priv->ifp);
363			mlx5e_open_locked(priv->ifp);
364		}
365		break;
366
367	case MLX5_PARAM_OFFSET(tx_completion_fact):
368		/* network interface must be down */
369		if (was_opened)
370			mlx5e_close_locked(priv->ifp);
371
372		/* verify parameter */
373		mlx5e_ethtool_sync_tx_completion_fact(priv);
374
375		/* restart network interface, if any */
376		if (was_opened)
377			mlx5e_open_locked(priv->ifp);
378		break;
379
380	case MLX5_PARAM_OFFSET(diag_pci_enable):
381		priv->params_ethtool.diag_pci_enable =
382		    priv->params_ethtool.diag_pci_enable ? 1 : 0;
383
384		error = -mlx5_core_set_diagnostics_full(priv->mdev,
385		    priv->params_ethtool.diag_pci_enable,
386		    priv->params_ethtool.diag_general_enable);
387		break;
388
389	case MLX5_PARAM_OFFSET(diag_general_enable):
390		priv->params_ethtool.diag_general_enable =
391		    priv->params_ethtool.diag_general_enable ? 1 : 0;
392
393		error = -mlx5_core_set_diagnostics_full(priv->mdev,
394		    priv->params_ethtool.diag_pci_enable,
395		    priv->params_ethtool.diag_general_enable);
396		break;
397
398	default:
399		break;
400	}
401done:
402	PRIV_UNLOCK(priv);
403	return (error);
404}
405
406/*
407 * Read the first three bytes of the eeprom in order to get the needed info
408 * for the whole reading.
409 * Byte 0 - Identifier byte
410 * Byte 1 - Revision byte
411 * Byte 2 - Status byte
412 */
413static int
414mlx5e_get_eeprom_info(struct mlx5e_priv *priv, struct mlx5e_eeprom *eeprom)
415{
416	struct mlx5_core_dev *dev = priv->mdev;
417	u32 data = 0;
418	int size_read = 0;
419	int ret;
420
421	ret = mlx5_query_module_num(dev, &eeprom->module_num);
422	if (ret) {
423		if_printf(priv->ifp, "%s:%d: Failed query module error=%d\n",
424		    __func__, __LINE__, ret);
425		return (ret);
426	}
427
428	/* Read the first three bytes to get Identifier, Revision and Status */
429	ret = mlx5_query_eeprom(dev, eeprom->i2c_addr, eeprom->page_num,
430	    eeprom->device_addr, MLX5E_EEPROM_INFO_BYTES, eeprom->module_num, &data,
431	    &size_read);
432	if (ret) {
433		if_printf(priv->ifp, "%s:%d: Failed query eeprom module error=0x%x\n",
434		    __func__, __LINE__, ret);
435		return (ret);
436	}
437
438	switch (data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) {
439	case SFF_8024_ID_QSFP:
440		eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
441		eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
442		break;
443	case SFF_8024_ID_QSFPPLUS:
444	case SFF_8024_ID_QSFP28:
445		if ((data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) == SFF_8024_ID_QSFP28 ||
446		    ((data & MLX5_EEPROM_REVISION_ID_BYTE_MASK) >> 8) >= 0x3) {
447			eeprom->type = MLX5E_ETH_MODULE_SFF_8636;
448			eeprom->len = MLX5E_ETH_MODULE_SFF_8636_LEN;
449		} else {
450			eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
451			eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
452		}
453		if ((data & MLX5_EEPROM_PAGE_3_VALID_BIT_MASK) == 0)
454			eeprom->page_valid = 1;
455		break;
456	case SFF_8024_ID_SFP:
457		eeprom->type = MLX5E_ETH_MODULE_SFF_8472;
458		eeprom->len = MLX5E_ETH_MODULE_SFF_8472_LEN;
459		break;
460	default:
461		if_printf(priv->ifp, "%s:%d: Not recognized cable type = 0x%x(%s)\n",
462		    __func__, __LINE__, data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK,
463		    sff_8024_id[data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK]);
464		return (EINVAL);
465	}
466	return (0);
467}
468
469/* Read both low and high pages of the eeprom */
470static int
471mlx5e_get_eeprom(struct mlx5e_priv *priv, struct mlx5e_eeprom *ee)
472{
473	struct mlx5_core_dev *dev = priv->mdev;
474	int size_read = 0;
475	int ret;
476
477	if (ee->len == 0)
478		return (EINVAL);
479
480	/* Read low page of the eeprom */
481	while (ee->device_addr < ee->len) {
482		ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num, ee->device_addr,
483		    ee->len - ee->device_addr, ee->module_num,
484		    ee->data + (ee->device_addr / 4), &size_read);
485		if (ret) {
486			if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
487			    "error = 0x%02x\n", __func__, __LINE__, ret);
488			return (ret);
489		}
490		ee->device_addr += size_read;
491	}
492
493	/* Read high page of the eeprom */
494	if (ee->page_valid) {
495		ee->device_addr = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
496		ee->page_num = MLX5E_EEPROM_HIGH_PAGE;
497		size_read = 0;
498		while (ee->device_addr < MLX5E_EEPROM_PAGE_LENGTH) {
499			ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num,
500			    ee->device_addr, MLX5E_EEPROM_PAGE_LENGTH - ee->device_addr,
501			    ee->module_num, ee->data + (ee->len / 4) +
502			    ((ee->device_addr - MLX5E_EEPROM_HIGH_PAGE_OFFSET) / 4),
503			    &size_read);
504			if (ret) {
505				if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
506				    "error = 0x%02x\n", __func__, __LINE__, ret);
507				return (ret);
508			}
509			ee->device_addr += size_read;
510		}
511	}
512	return (0);
513}
514
515static void
516mlx5e_print_eeprom(struct mlx5e_eeprom *eeprom)
517{
518	int row;
519	int index_in_row;
520	int byte_to_write = 0;
521	int line_length = 16;
522
523	printf("\nOffset\t\tValues\n");
524	printf("------\t\t------");
525	while (byte_to_write < eeprom->len) {
526		printf("\n0x%04X\t\t", byte_to_write);
527		for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
528			printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
529			byte_to_write++;
530		}
531	}
532
533	if (eeprom->page_valid) {
534		row = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
535		printf("\n\nUpper Page 0x03\n");
536		printf("\nOffset\t\tValues\n");
537		printf("------\t\t------");
538		while (row < MLX5E_EEPROM_PAGE_LENGTH) {
539			printf("\n0x%04X\t\t", row);
540			for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
541				printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
542				byte_to_write++;
543				row++;
544			}
545		}
546	}
547}
548
549/*
550 * Read cable EEPROM module information by first inspecting the first
551 * three bytes to get the initial information for a whole reading.
552 * Information will be printed to dmesg.
553 */
554static int
555mlx5e_read_eeprom(SYSCTL_HANDLER_ARGS)
556{
557	struct mlx5e_priv *priv = arg1;
558	struct mlx5e_eeprom eeprom;
559	int error;
560	int result = 0;
561
562	PRIV_LOCK(priv);
563	error = sysctl_handle_int(oidp, &result, 0, req);
564	if (error || !req->newptr)
565		goto done;
566
567	/* Check if device is gone */
568	if (priv->gone) {
569		error = ENXIO;
570		goto done;
571	}
572
573	if (result == 1) {
574		eeprom.i2c_addr = MLX5E_I2C_ADDR_LOW;
575		eeprom.device_addr = 0;
576		eeprom.page_num = MLX5E_EEPROM_LOW_PAGE;
577		eeprom.page_valid = 0;
578
579		/* Read three first bytes to get important info */
580		error = mlx5e_get_eeprom_info(priv, &eeprom);
581		if (error) {
582			if_printf(priv->ifp, "%s:%d: Failed reading eeprom's "
583			    "initial information\n", __func__, __LINE__);
584			error = 0;
585			goto done;
586		}
587		/*
588		 * Allocate needed length buffer and additional space for
589		 * page 0x03
590		 */
591		eeprom.data = malloc(eeprom.len + MLX5E_EEPROM_PAGE_LENGTH,
592		    M_MLX5EN, M_WAITOK | M_ZERO);
593
594		/* Read the whole eeprom information */
595		error = mlx5e_get_eeprom(priv, &eeprom);
596		if (error) {
597			if_printf(priv->ifp, "%s:%d: Failed reading eeprom\n",
598			    __func__, __LINE__);
599			error = 0;
600			/*
601			 * Continue printing partial information in case of
602			 * an error
603			 */
604		}
605		mlx5e_print_eeprom(&eeprom);
606		free(eeprom.data, M_MLX5EN);
607	}
608done:
609	PRIV_UNLOCK(priv);
610	return (error);
611}
612
613static const char *mlx5e_params_desc[] = {
614	MLX5E_PARAMS(MLX5E_STATS_DESC)
615};
616
617static const char *mlx5e_port_stats_debug_desc[] = {
618	MLX5E_PORT_STATS_DEBUG(MLX5E_STATS_DESC)
619};
620
621static int
622mlx5e_ethtool_debug_stats(SYSCTL_HANDLER_ARGS)
623{
624	struct mlx5e_priv *priv = arg1;
625	int error;
626	int sys_debug;
627
628	sys_debug = priv->sysctl_debug;
629	error = sysctl_handle_int(oidp, &priv->sysctl_debug, 0, req);
630	if (error || !req->newptr)
631		return (error);
632	priv->sysctl_debug = !!priv->sysctl_debug;
633	if (sys_debug == priv->sysctl_debug)
634		return (error);
635	if (priv->sysctl_debug)
636		mlx5e_create_stats(&priv->stats.port_stats_debug.ctx,
637		    SYSCTL_CHILDREN(priv->sysctl_ifnet), "debug_stats",
638		    mlx5e_port_stats_debug_desc, MLX5E_PORT_STATS_DEBUG_NUM,
639		    priv->stats.port_stats_debug.arg);
640	else
641		sysctl_ctx_free(&priv->stats.port_stats_debug.ctx);
642	return (error);
643}
644
645static void
646mlx5e_create_diagnostics(struct mlx5e_priv *priv)
647{
648	struct mlx5_core_diagnostics_entry entry;
649	struct sysctl_ctx_list *ctx;
650	struct sysctl_oid *node;
651	int x;
652
653	/* sysctl context we are using */
654	ctx = &priv->sysctl_ctx;
655
656	/* create root node */
657	node = SYSCTL_ADD_NODE(ctx,
658	    SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
659	    "diagnostics", CTLFLAG_RD, NULL, "Diagnostics");
660	if (node == NULL)
661		return;
662
663	/* create PCI diagnostics */
664	for (x = 0; x != MLX5_CORE_PCI_DIAGNOSTICS_NUM; x++) {
665		entry = mlx5_core_pci_diagnostics_table[x];
666		if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
667			continue;
668		SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
669		    entry.desc, CTLFLAG_RD, priv->params_pci.array + x,
670		    "PCI diagnostics counter");
671	}
672
673	/* create general diagnostics */
674	for (x = 0; x != MLX5_CORE_GENERAL_DIAGNOSTICS_NUM; x++) {
675		entry = mlx5_core_general_diagnostics_table[x];
676		if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
677			continue;
678		SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
679		    entry.desc, CTLFLAG_RD, priv->params_general.array + x,
680		    "General diagnostics counter");
681	}
682}
683
684void
685mlx5e_create_ethtool(struct mlx5e_priv *priv)
686{
687	struct sysctl_oid *node;
688	const char *pnameunit;
689	unsigned x;
690
691	/* set some defaults */
692	priv->params_ethtool.tx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_SQ_SIZE;
693	priv->params_ethtool.rx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE;
694	priv->params_ethtool.tx_queue_size = 1 << priv->params.log_sq_size;
695	priv->params_ethtool.rx_queue_size = 1 << priv->params.log_rq_size;
696	priv->params_ethtool.channels = priv->params.num_channels;
697	priv->params_ethtool.coalesce_pkts_max = MLX5E_FLD_MAX(cqc, cq_max_count);
698	priv->params_ethtool.coalesce_usecs_max = MLX5E_FLD_MAX(cqc, cq_period);
699	priv->params_ethtool.rx_coalesce_mode = priv->params.rx_cq_moderation_mode;
700	priv->params_ethtool.rx_coalesce_usecs = priv->params.rx_cq_moderation_usec;
701	priv->params_ethtool.rx_coalesce_pkts = priv->params.rx_cq_moderation_pkts;
702	priv->params_ethtool.tx_coalesce_mode = priv->params.tx_cq_moderation_mode;
703	priv->params_ethtool.tx_coalesce_usecs = priv->params.tx_cq_moderation_usec;
704	priv->params_ethtool.tx_coalesce_pkts = priv->params.tx_cq_moderation_pkts;
705	priv->params_ethtool.hw_lro = priv->params.hw_lro_en;
706	priv->params_ethtool.cqe_zipping = priv->params.cqe_zipping_en;
707	mlx5e_ethtool_sync_tx_completion_fact(priv);
708
709	/* create root node */
710	node = SYSCTL_ADD_NODE(&priv->sysctl_ctx,
711	    SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
712	    "conf", CTLFLAG_RW, NULL, "Configuration");
713	if (node == NULL)
714		return;
715	for (x = 0; x != MLX5E_PARAMS_NUM; x++) {
716		/* check for read-only parameter */
717		if (strstr(mlx5e_params_desc[2 * x], "_max") != NULL) {
718			SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
719			    mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RD |
720			    CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
721			    mlx5e_params_desc[2 * x + 1]);
722		} else {
723#if (__FreeBSD_version < 1100000)
724			char path[64];
725#endif
726			/*
727			 * NOTE: In FreeBSD-11 and newer the
728			 * CTLFLAG_RWTUN flag will take care of
729			 * loading default sysctl value from the
730			 * kernel environment, if any:
731			 */
732			SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
733			    mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RWTUN |
734			    CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
735			    mlx5e_params_desc[2 * x + 1]);
736
737#if (__FreeBSD_version < 1100000)
738			/* compute path for sysctl */
739			snprintf(path, sizeof(path), "dev.mce.%d.conf.%s",
740			    device_get_unit(priv->mdev->pdev->dev.bsddev),
741			    mlx5e_params_desc[2 * x]);
742
743			/* try to fetch tunable, if any */
744			if (TUNABLE_QUAD_FETCH(path, &priv->params_ethtool.arg[x]))
745				mlx5e_ethtool_handler(NULL, priv, x, NULL);
746#endif
747		}
748	}
749
750	SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
751	    "debug_stats", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv,
752	    0, &mlx5e_ethtool_debug_stats, "I", "Extended debug statistics");
753
754	pnameunit = device_get_nameunit(priv->mdev->pdev->dev.bsddev);
755
756	SYSCTL_ADD_STRING(&priv->sysctl_ctx, SYSCTL_CHILDREN(node),
757	    OID_AUTO, "device_name", CTLFLAG_RD,
758	    __DECONST(void *, pnameunit), 0,
759	    "PCI device name");
760
761	/* EEPROM support */
762	SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO, "eeprom_info",
763	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv, 0,
764	    mlx5e_read_eeprom, "I", "EEPROM information");
765
766	/* Diagnostics support */
767	mlx5e_create_diagnostics(priv);
768}
769