ixgbe_phy.c revision 283620
1/****************************************************************************** 2 3 Copyright (c) 2001-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32******************************************************************************/ 33/*$FreeBSD: stable/10/sys/dev/ixgbe/ixgbe_phy.c 283620 2015-05-27 17:44:11Z erj $*/ 34 35#include "ixgbe_api.h" 36#include "ixgbe_common.h" 37#include "ixgbe_phy.h" 38 39static void ixgbe_i2c_start(struct ixgbe_hw *hw); 40static void ixgbe_i2c_stop(struct ixgbe_hw *hw); 41static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); 42static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); 43static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); 44static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); 45static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); 46static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); 47static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); 48static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); 49static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl); 50static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, 51 u8 *sff8472_data); 52 53/** 54 * ixgbe_out_i2c_byte_ack - Send I2C byte with ack 55 * @hw: pointer to the hardware structure 56 * @byte: byte to send 57 * 58 * Returns an error code on error. 59 */ 60static s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte) 61{ 62 s32 status; 63 64 status = ixgbe_clock_out_i2c_byte(hw, byte); 65 if (status) 66 return status; 67 return ixgbe_get_i2c_ack(hw); 68} 69 70/** 71 * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack 72 * @hw: pointer to the hardware structure 73 * @byte: pointer to a u8 to receive the byte 74 * 75 * Returns an error code on error. 76 */ 77static s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte) 78{ 79 s32 status; 80 81 status = ixgbe_clock_in_i2c_byte(hw, byte); 82 if (status) 83 return status; 84 /* ACK */ 85 return ixgbe_clock_out_i2c_bit(hw, FALSE); 86} 87 88/** 89 * ixgbe_ones_comp_byte_add - Perform one's complement addition 90 * @add1 - addend 1 91 * @add2 - addend 2 92 * 93 * Returns one's complement 8-bit sum. 94 */ 95static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2) 96{ 97 u16 sum = add1 + add2; 98 99 sum = (sum & 0xFF) + (sum >> 8); 100 return sum & 0xFF; 101} 102 103/** 104 * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation 105 * @hw: pointer to the hardware structure 106 * @addr: I2C bus address to read from 107 * @reg: I2C device register to read from 108 * @val: pointer to location to receive read value 109 * @lock: TRUE if to take and release semaphore 110 * 111 * Returns an error code on error. 112 */ 113static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, 114 u16 reg, u16 *val, bool lock) 115{ 116 u32 swfw_mask = hw->phy.phy_semaphore_mask; 117 int max_retry = 10; 118 int retry = 0; 119 u8 csum_byte; 120 u8 high_bits; 121 u8 low_bits; 122 u8 reg_high; 123 u8 csum; 124 125 if (hw->mac.type >= ixgbe_mac_X550) 126 max_retry = 3; 127 reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */ 128 csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF); 129 csum = ~csum; 130 do { 131 if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) 132 return IXGBE_ERR_SWFW_SYNC; 133 ixgbe_i2c_start(hw); 134 /* Device Address and write indication */ 135 if (ixgbe_out_i2c_byte_ack(hw, addr)) 136 goto fail; 137 /* Write bits 14:8 */ 138 if (ixgbe_out_i2c_byte_ack(hw, reg_high)) 139 goto fail; 140 /* Write bits 7:0 */ 141 if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF)) 142 goto fail; 143 /* Write csum */ 144 if (ixgbe_out_i2c_byte_ack(hw, csum)) 145 goto fail; 146 /* Re-start condition */ 147 ixgbe_i2c_start(hw); 148 /* Device Address and read indication */ 149 if (ixgbe_out_i2c_byte_ack(hw, addr | 1)) 150 goto fail; 151 /* Get upper bits */ 152 if (ixgbe_in_i2c_byte_ack(hw, &high_bits)) 153 goto fail; 154 /* Get low bits */ 155 if (ixgbe_in_i2c_byte_ack(hw, &low_bits)) 156 goto fail; 157 /* Get csum */ 158 if (ixgbe_clock_in_i2c_byte(hw, &csum_byte)) 159 goto fail; 160 /* NACK */ 161 if (ixgbe_clock_out_i2c_bit(hw, FALSE)) 162 goto fail; 163 ixgbe_i2c_stop(hw); 164 if (lock) 165 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 166 *val = (high_bits << 8) | low_bits; 167 return 0; 168 169fail: 170 ixgbe_i2c_bus_clear(hw); 171 if (lock) 172 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 173 retry++; 174 if (retry < max_retry) 175 DEBUGOUT("I2C byte read combined error - Retrying.\n"); 176 else 177 DEBUGOUT("I2C byte read combined error.\n"); 178 } while (retry < max_retry); 179 180 return IXGBE_ERR_I2C; 181} 182 183/** 184 * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation 185 * @hw: pointer to the hardware structure 186 * @addr: I2C bus address to read from 187 * @reg: I2C device register to read from 188 * @val: pointer to location to receive read value 189 * 190 * Returns an error code on error. 191 **/ 192static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, 193 u16 reg, u16 *val) 194{ 195 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, TRUE); 196} 197 198/** 199 * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation 200 * @hw: pointer to the hardware structure 201 * @addr: I2C bus address to read from 202 * @reg: I2C device register to read from 203 * @val: pointer to location to receive read value 204 * 205 * Returns an error code on error. 206 **/ 207static s32 208ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, 209 u16 reg, u16 *val) 210{ 211 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, FALSE); 212} 213 214/** 215 * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation 216 * @hw: pointer to the hardware structure 217 * @addr: I2C bus address to write to 218 * @reg: I2C device register to write to 219 * @val: value to write 220 * @lock: TRUE if to take and release semaphore 221 * 222 * Returns an error code on error. 223 */ 224static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, 225 u16 reg, u16 val, bool lock) 226{ 227 u32 swfw_mask = hw->phy.phy_semaphore_mask; 228 int max_retry = 1; 229 int retry = 0; 230 u8 reg_high; 231 u8 csum; 232 233 reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */ 234 csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF); 235 csum = ixgbe_ones_comp_byte_add(csum, val >> 8); 236 csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF); 237 csum = ~csum; 238 do { 239 if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) 240 return IXGBE_ERR_SWFW_SYNC; 241 ixgbe_i2c_start(hw); 242 /* Device Address and write indication */ 243 if (ixgbe_out_i2c_byte_ack(hw, addr)) 244 goto fail; 245 /* Write bits 14:8 */ 246 if (ixgbe_out_i2c_byte_ack(hw, reg_high)) 247 goto fail; 248 /* Write bits 7:0 */ 249 if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF)) 250 goto fail; 251 /* Write data 15:8 */ 252 if (ixgbe_out_i2c_byte_ack(hw, val >> 8)) 253 goto fail; 254 /* Write data 7:0 */ 255 if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF)) 256 goto fail; 257 /* Write csum */ 258 if (ixgbe_out_i2c_byte_ack(hw, csum)) 259 goto fail; 260 ixgbe_i2c_stop(hw); 261 if (lock) 262 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 263 return 0; 264 265fail: 266 ixgbe_i2c_bus_clear(hw); 267 if (lock) 268 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 269 retry++; 270 if (retry < max_retry) 271 DEBUGOUT("I2C byte write combined error - Retrying.\n"); 272 else 273 DEBUGOUT("I2C byte write combined error.\n"); 274 } while (retry < max_retry); 275 276 return IXGBE_ERR_I2C; 277} 278 279/** 280 * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation 281 * @hw: pointer to the hardware structure 282 * @addr: I2C bus address to write to 283 * @reg: I2C device register to write to 284 * @val: value to write 285 * 286 * Returns an error code on error. 287 **/ 288static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, 289 u8 addr, u16 reg, u16 val) 290{ 291 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, TRUE); 292} 293 294/** 295 * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation 296 * @hw: pointer to the hardware structure 297 * @addr: I2C bus address to write to 298 * @reg: I2C device register to write to 299 * @val: value to write 300 * 301 * Returns an error code on error. 302 **/ 303static s32 304ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, 305 u8 addr, u16 reg, u16 val) 306{ 307 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, FALSE); 308} 309 310/** 311 * ixgbe_init_phy_ops_generic - Inits PHY function ptrs 312 * @hw: pointer to the hardware structure 313 * 314 * Initialize the function pointers. 315 **/ 316s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) 317{ 318 struct ixgbe_phy_info *phy = &hw->phy; 319 320 DEBUGFUNC("ixgbe_init_phy_ops_generic"); 321 322 /* PHY */ 323 phy->ops.identify = ixgbe_identify_phy_generic; 324 phy->ops.reset = ixgbe_reset_phy_generic; 325 phy->ops.read_reg = ixgbe_read_phy_reg_generic; 326 phy->ops.write_reg = ixgbe_write_phy_reg_generic; 327 phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi; 328 phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi; 329 phy->ops.setup_link = ixgbe_setup_phy_link_generic; 330 phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic; 331 phy->ops.check_link = NULL; 332 phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic; 333 phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic; 334 phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic; 335 phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic; 336 phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic; 337 phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic; 338 phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear; 339 phy->ops.identify_sfp = ixgbe_identify_module_generic; 340 phy->sfp_type = ixgbe_sfp_type_unknown; 341 phy->ops.read_i2c_combined = ixgbe_read_i2c_combined_generic; 342 phy->ops.write_i2c_combined = ixgbe_write_i2c_combined_generic; 343 phy->ops.read_i2c_combined_unlocked = 344 ixgbe_read_i2c_combined_generic_unlocked; 345 phy->ops.write_i2c_combined_unlocked = 346 ixgbe_write_i2c_combined_generic_unlocked; 347 phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked; 348 phy->ops.write_i2c_byte_unlocked = 349 ixgbe_write_i2c_byte_generic_unlocked; 350 phy->ops.check_overtemp = ixgbe_tn_check_overtemp; 351 return IXGBE_SUCCESS; 352} 353 354/** 355 * ixgbe_identify_phy_generic - Get physical layer module 356 * @hw: pointer to hardware structure 357 * 358 * Determines the physical layer module found on the current adapter. 359 **/ 360s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) 361{ 362 s32 status = IXGBE_ERR_PHY_ADDR_INVALID; 363 u32 phy_addr; 364 u16 ext_ability = 0; 365 366 DEBUGFUNC("ixgbe_identify_phy_generic"); 367 368 if (!hw->phy.phy_semaphore_mask) { 369 if (hw->bus.lan_id) 370 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; 371 else 372 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; 373 } 374 375 if (hw->phy.type == ixgbe_phy_unknown) { 376 for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { 377 if (ixgbe_validate_phy_addr(hw, phy_addr)) { 378 hw->phy.addr = phy_addr; 379 ixgbe_get_phy_id(hw); 380 hw->phy.type = 381 ixgbe_get_phy_type_from_id(hw->phy.id); 382 383 if (hw->phy.type == ixgbe_phy_unknown) { 384 hw->phy.ops.read_reg(hw, 385 IXGBE_MDIO_PHY_EXT_ABILITY, 386 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 387 &ext_ability); 388 if (ext_ability & 389 (IXGBE_MDIO_PHY_10GBASET_ABILITY | 390 IXGBE_MDIO_PHY_1000BASET_ABILITY)) 391 hw->phy.type = 392 ixgbe_phy_cu_unknown; 393 else 394 hw->phy.type = 395 ixgbe_phy_generic; 396 } 397 398 status = IXGBE_SUCCESS; 399 break; 400 } 401 } 402 403 /* Certain media types do not have a phy so an address will not 404 * be found and the code will take this path. Caller has to 405 * decide if it is an error or not. 406 */ 407 if (status != IXGBE_SUCCESS) { 408 hw->phy.addr = 0; 409 } 410 } else { 411 status = IXGBE_SUCCESS; 412 } 413 414 return status; 415} 416 417/** 418 * ixgbe_check_reset_blocked - check status of MNG FW veto bit 419 * @hw: pointer to the hardware structure 420 * 421 * This function checks the MMNGC.MNG_VETO bit to see if there are 422 * any constraints on link from manageability. For MAC's that don't 423 * have this bit just return faluse since the link can not be blocked 424 * via this method. 425 **/ 426s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw) 427{ 428 u32 mmngc; 429 430 DEBUGFUNC("ixgbe_check_reset_blocked"); 431 432 /* If we don't have this bit, it can't be blocking */ 433 if (hw->mac.type == ixgbe_mac_82598EB) 434 return FALSE; 435 436 mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC); 437 if (mmngc & IXGBE_MMNGC_MNG_VETO) { 438 ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, 439 "MNG_VETO bit detected.\n"); 440 return TRUE; 441 } 442 443 return FALSE; 444} 445 446/** 447 * ixgbe_validate_phy_addr - Determines phy address is valid 448 * @hw: pointer to hardware structure 449 * 450 **/ 451bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) 452{ 453 u16 phy_id = 0; 454 bool valid = FALSE; 455 456 DEBUGFUNC("ixgbe_validate_phy_addr"); 457 458 hw->phy.addr = phy_addr; 459 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, 460 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); 461 462 if (phy_id != 0xFFFF && phy_id != 0x0) 463 valid = TRUE; 464 465 return valid; 466} 467 468/** 469 * ixgbe_get_phy_id - Get the phy type 470 * @hw: pointer to hardware structure 471 * 472 **/ 473s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) 474{ 475 u32 status; 476 u16 phy_id_high = 0; 477 u16 phy_id_low = 0; 478 479 DEBUGFUNC("ixgbe_get_phy_id"); 480 481 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, 482 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 483 &phy_id_high); 484 485 if (status == IXGBE_SUCCESS) { 486 hw->phy.id = (u32)(phy_id_high << 16); 487 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, 488 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 489 &phy_id_low); 490 hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); 491 hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); 492 } 493 return status; 494} 495 496/** 497 * ixgbe_get_phy_type_from_id - Get the phy type 498 * @hw: pointer to hardware structure 499 * 500 **/ 501enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) 502{ 503 enum ixgbe_phy_type phy_type; 504 505 DEBUGFUNC("ixgbe_get_phy_type_from_id"); 506 507 switch (phy_id) { 508 case TN1010_PHY_ID: 509 phy_type = ixgbe_phy_tn; 510 break; 511 case X550_PHY_ID: 512 case X540_PHY_ID: 513 phy_type = ixgbe_phy_aq; 514 break; 515 case QT2022_PHY_ID: 516 phy_type = ixgbe_phy_qt; 517 break; 518 case ATH_PHY_ID: 519 phy_type = ixgbe_phy_nl; 520 break; 521 case X557_PHY_ID: 522 phy_type = ixgbe_phy_x550em_ext_t; 523 break; 524 default: 525 phy_type = ixgbe_phy_unknown; 526 break; 527 } 528 529 DEBUGOUT1("phy type found is %d\n", phy_type); 530 return phy_type; 531} 532 533/** 534 * ixgbe_reset_phy_generic - Performs a PHY reset 535 * @hw: pointer to hardware structure 536 **/ 537s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) 538{ 539 u32 i; 540 u16 ctrl = 0; 541 s32 status = IXGBE_SUCCESS; 542 543 DEBUGFUNC("ixgbe_reset_phy_generic"); 544 545 if (hw->phy.type == ixgbe_phy_unknown) 546 status = ixgbe_identify_phy_generic(hw); 547 548 if (status != IXGBE_SUCCESS || hw->phy.type == ixgbe_phy_none) 549 goto out; 550 551 /* Don't reset PHY if it's shut down due to overtemp. */ 552 if (!hw->phy.reset_if_overtemp && 553 (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) 554 goto out; 555 556 /* Blocked by MNG FW so bail */ 557 if (ixgbe_check_reset_blocked(hw)) 558 goto out; 559 560 /* 561 * Perform soft PHY reset to the PHY_XS. 562 * This will cause a soft reset to the PHY 563 */ 564 hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, 565 IXGBE_MDIO_PHY_XS_DEV_TYPE, 566 IXGBE_MDIO_PHY_XS_RESET); 567 568 /* 569 * Poll for reset bit to self-clear indicating reset is complete. 570 * Some PHYs could take up to 3 seconds to complete and need about 571 * 1.7 usec delay after the reset is complete. 572 */ 573 for (i = 0; i < 30; i++) { 574 msec_delay(100); 575 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, 576 IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl); 577 if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) { 578 usec_delay(2); 579 break; 580 } 581 } 582 583 if (ctrl & IXGBE_MDIO_PHY_XS_RESET) { 584 status = IXGBE_ERR_RESET_FAILED; 585 ERROR_REPORT1(IXGBE_ERROR_POLLING, 586 "PHY reset polling failed to complete.\n"); 587 } 588 589out: 590 return status; 591} 592 593/** 594 * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without 595 * the SWFW lock 596 * @hw: pointer to hardware structure 597 * @reg_addr: 32 bit address of PHY register to read 598 * @phy_data: Pointer to read data from PHY register 599 **/ 600s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, 601 u16 *phy_data) 602{ 603 u32 i, data, command; 604 605 /* Setup and write the address cycle command */ 606 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | 607 (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | 608 (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 609 (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); 610 611 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 612 613 /* 614 * Check every 10 usec to see if the address cycle completed. 615 * The MDI Command bit will clear when the operation is 616 * complete 617 */ 618 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 619 usec_delay(10); 620 621 command = IXGBE_READ_REG(hw, IXGBE_MSCA); 622 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) 623 break; 624 } 625 626 627 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { 628 ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n"); 629 return IXGBE_ERR_PHY; 630 } 631 632 /* 633 * Address cycle complete, setup and write the read 634 * command 635 */ 636 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | 637 (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | 638 (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 639 (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); 640 641 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 642 643 /* 644 * Check every 10 usec to see if the address cycle 645 * completed. The MDI Command bit will clear when the 646 * operation is complete 647 */ 648 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 649 usec_delay(10); 650 651 command = IXGBE_READ_REG(hw, IXGBE_MSCA); 652 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) 653 break; 654 } 655 656 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { 657 ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n"); 658 return IXGBE_ERR_PHY; 659 } 660 661 /* 662 * Read operation is complete. Get the data 663 * from MSRWD 664 */ 665 data = IXGBE_READ_REG(hw, IXGBE_MSRWD); 666 data >>= IXGBE_MSRWD_READ_DATA_SHIFT; 667 *phy_data = (u16)(data); 668 669 return IXGBE_SUCCESS; 670} 671 672/** 673 * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register 674 * using the SWFW lock - this function is needed in most cases 675 * @hw: pointer to hardware structure 676 * @reg_addr: 32 bit address of PHY register to read 677 * @phy_data: Pointer to read data from PHY register 678 **/ 679s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, 680 u32 device_type, u16 *phy_data) 681{ 682 s32 status; 683 u32 gssr = hw->phy.phy_semaphore_mask; 684 685 DEBUGFUNC("ixgbe_read_phy_reg_generic"); 686 687 if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) { 688 status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type, 689 phy_data); 690 hw->mac.ops.release_swfw_sync(hw, gssr); 691 } else { 692 status = IXGBE_ERR_SWFW_SYNC; 693 } 694 695 return status; 696} 697 698/** 699 * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register 700 * without SWFW lock 701 * @hw: pointer to hardware structure 702 * @reg_addr: 32 bit PHY register to write 703 * @device_type: 5 bit device type 704 * @phy_data: Data to write to the PHY register 705 **/ 706s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, 707 u32 device_type, u16 phy_data) 708{ 709 u32 i, command; 710 711 /* Put the data in the MDI single read and write data register*/ 712 IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); 713 714 /* Setup and write the address cycle command */ 715 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | 716 (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | 717 (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 718 (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); 719 720 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 721 722 /* 723 * Check every 10 usec to see if the address cycle completed. 724 * The MDI Command bit will clear when the operation is 725 * complete 726 */ 727 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 728 usec_delay(10); 729 730 command = IXGBE_READ_REG(hw, IXGBE_MSCA); 731 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) 732 break; 733 } 734 735 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { 736 ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n"); 737 return IXGBE_ERR_PHY; 738 } 739 740 /* 741 * Address cycle complete, setup and write the write 742 * command 743 */ 744 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | 745 (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | 746 (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 747 (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); 748 749 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 750 751 /* 752 * Check every 10 usec to see if the address cycle 753 * completed. The MDI Command bit will clear when the 754 * operation is complete 755 */ 756 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 757 usec_delay(10); 758 759 command = IXGBE_READ_REG(hw, IXGBE_MSCA); 760 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) 761 break; 762 } 763 764 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { 765 ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n"); 766 return IXGBE_ERR_PHY; 767 } 768 769 return IXGBE_SUCCESS; 770} 771 772/** 773 * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register 774 * using SWFW lock- this function is needed in most cases 775 * @hw: pointer to hardware structure 776 * @reg_addr: 32 bit PHY register to write 777 * @device_type: 5 bit device type 778 * @phy_data: Data to write to the PHY register 779 **/ 780s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, 781 u32 device_type, u16 phy_data) 782{ 783 s32 status; 784 u32 gssr = hw->phy.phy_semaphore_mask; 785 786 DEBUGFUNC("ixgbe_write_phy_reg_generic"); 787 788 if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) { 789 status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, 790 phy_data); 791 hw->mac.ops.release_swfw_sync(hw, gssr); 792 } else { 793 status = IXGBE_ERR_SWFW_SYNC; 794 } 795 796 return status; 797} 798 799/** 800 * ixgbe_setup_phy_link_generic - Set and restart auto-neg 801 * @hw: pointer to hardware structure 802 * 803 * Restart auto-negotiation and PHY and waits for completion. 804 **/ 805s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) 806{ 807 s32 status = IXGBE_SUCCESS; 808 u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; 809 bool autoneg = FALSE; 810 ixgbe_link_speed speed; 811 812 DEBUGFUNC("ixgbe_setup_phy_link_generic"); 813 814 ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); 815 816 if (speed & IXGBE_LINK_SPEED_10GB_FULL) { 817 /* Set or unset auto-negotiation 10G advertisement */ 818 hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, 819 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 820 &autoneg_reg); 821 822 autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; 823 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) 824 autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; 825 826 hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, 827 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 828 autoneg_reg); 829 } 830 831 if (hw->mac.type == ixgbe_mac_X550) { 832 if (speed & IXGBE_LINK_SPEED_5GB_FULL) { 833 /* Set or unset auto-negotiation 1G advertisement */ 834 hw->phy.ops.read_reg(hw, 835 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 836 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 837 &autoneg_reg); 838 839 autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE; 840 if (hw->phy.autoneg_advertised & 841 IXGBE_LINK_SPEED_5GB_FULL) 842 autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE; 843 844 hw->phy.ops.write_reg(hw, 845 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 846 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 847 autoneg_reg); 848 } 849 850 if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) { 851 /* Set or unset auto-negotiation 1G advertisement */ 852 hw->phy.ops.read_reg(hw, 853 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 854 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 855 &autoneg_reg); 856 857 autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE; 858 if (hw->phy.autoneg_advertised & 859 IXGBE_LINK_SPEED_2_5GB_FULL) 860 autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE; 861 862 hw->phy.ops.write_reg(hw, 863 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 864 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 865 autoneg_reg); 866 } 867 } 868 869 if (speed & IXGBE_LINK_SPEED_1GB_FULL) { 870 /* Set or unset auto-negotiation 1G advertisement */ 871 hw->phy.ops.read_reg(hw, 872 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 873 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 874 &autoneg_reg); 875 876 autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; 877 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) 878 autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; 879 880 hw->phy.ops.write_reg(hw, 881 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 882 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 883 autoneg_reg); 884 } 885 886 if (speed & IXGBE_LINK_SPEED_100_FULL) { 887 /* Set or unset auto-negotiation 100M advertisement */ 888 hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, 889 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 890 &autoneg_reg); 891 892 autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE | 893 IXGBE_MII_100BASE_T_ADVERTISE_HALF); 894 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) 895 autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; 896 897 hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, 898 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 899 autoneg_reg); 900 } 901 902 /* Blocked by MNG FW so don't reset PHY */ 903 if (ixgbe_check_reset_blocked(hw)) 904 return status; 905 906 /* Restart PHY auto-negotiation. */ 907 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, 908 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); 909 910 autoneg_reg |= IXGBE_MII_RESTART; 911 912 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, 913 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); 914 915 return status; 916} 917 918/** 919 * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities 920 * @hw: pointer to hardware structure 921 * @speed: new link speed 922 **/ 923s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, 924 ixgbe_link_speed speed, 925 bool autoneg_wait_to_complete) 926{ 927 UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); 928 929 DEBUGFUNC("ixgbe_setup_phy_link_speed_generic"); 930 931 /* 932 * Clear autoneg_advertised and set new values based on input link 933 * speed. 934 */ 935 hw->phy.autoneg_advertised = 0; 936 937 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 938 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; 939 940 if (speed & IXGBE_LINK_SPEED_5GB_FULL) 941 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL; 942 943 if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) 944 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL; 945 946 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 947 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; 948 949 if (speed & IXGBE_LINK_SPEED_100_FULL) 950 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; 951 952 /* Setup link based on the new speed settings */ 953 hw->phy.ops.setup_link(hw); 954 955 return IXGBE_SUCCESS; 956} 957 958/** 959 * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities 960 * @hw: pointer to hardware structure 961 * @speed: pointer to link speed 962 * @autoneg: boolean auto-negotiation value 963 * 964 * Determines the supported link capabilities by reading the PHY auto 965 * negotiation register. 966 **/ 967s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, 968 ixgbe_link_speed *speed, 969 bool *autoneg) 970{ 971 s32 status; 972 u16 speed_ability; 973 974 DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic"); 975 976 *speed = 0; 977 *autoneg = TRUE; 978 979 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, 980 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 981 &speed_ability); 982 983 if (status == IXGBE_SUCCESS) { 984 if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) 985 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 986 if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) 987 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 988 if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M) 989 *speed |= IXGBE_LINK_SPEED_100_FULL; 990 } 991 992 /* Internal PHY does not support 100 Mbps */ 993 if (hw->mac.type == ixgbe_mac_X550EM_x) 994 *speed &= ~IXGBE_LINK_SPEED_100_FULL; 995 996 if (hw->mac.type == ixgbe_mac_X550) { 997 *speed |= IXGBE_LINK_SPEED_2_5GB_FULL; 998 *speed |= IXGBE_LINK_SPEED_5GB_FULL; 999 } 1000 1001 return status; 1002} 1003 1004/** 1005 * ixgbe_check_phy_link_tnx - Determine link and speed status 1006 * @hw: pointer to hardware structure 1007 * 1008 * Reads the VS1 register to determine if link is up and the current speed for 1009 * the PHY. 1010 **/ 1011s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 1012 bool *link_up) 1013{ 1014 s32 status = IXGBE_SUCCESS; 1015 u32 time_out; 1016 u32 max_time_out = 10; 1017 u16 phy_link = 0; 1018 u16 phy_speed = 0; 1019 u16 phy_data = 0; 1020 1021 DEBUGFUNC("ixgbe_check_phy_link_tnx"); 1022 1023 /* Initialize speed and link to default case */ 1024 *link_up = FALSE; 1025 *speed = IXGBE_LINK_SPEED_10GB_FULL; 1026 1027 /* 1028 * Check current speed and link status of the PHY register. 1029 * This is a vendor specific register and may have to 1030 * be changed for other copper PHYs. 1031 */ 1032 for (time_out = 0; time_out < max_time_out; time_out++) { 1033 usec_delay(10); 1034 status = hw->phy.ops.read_reg(hw, 1035 IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, 1036 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 1037 &phy_data); 1038 phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; 1039 phy_speed = phy_data & 1040 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; 1041 if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { 1042 *link_up = TRUE; 1043 if (phy_speed == 1044 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) 1045 *speed = IXGBE_LINK_SPEED_1GB_FULL; 1046 break; 1047 } 1048 } 1049 1050 return status; 1051} 1052 1053/** 1054 * ixgbe_setup_phy_link_tnx - Set and restart auto-neg 1055 * @hw: pointer to hardware structure 1056 * 1057 * Restart auto-negotiation and PHY and waits for completion. 1058 **/ 1059s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) 1060{ 1061 s32 status = IXGBE_SUCCESS; 1062 u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; 1063 bool autoneg = FALSE; 1064 ixgbe_link_speed speed; 1065 1066 DEBUGFUNC("ixgbe_setup_phy_link_tnx"); 1067 1068 ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); 1069 1070 if (speed & IXGBE_LINK_SPEED_10GB_FULL) { 1071 /* Set or unset auto-negotiation 10G advertisement */ 1072 hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, 1073 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1074 &autoneg_reg); 1075 1076 autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; 1077 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) 1078 autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; 1079 1080 hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, 1081 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1082 autoneg_reg); 1083 } 1084 1085 if (speed & IXGBE_LINK_SPEED_1GB_FULL) { 1086 /* Set or unset auto-negotiation 1G advertisement */ 1087 hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, 1088 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1089 &autoneg_reg); 1090 1091 autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; 1092 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) 1093 autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; 1094 1095 hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, 1096 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1097 autoneg_reg); 1098 } 1099 1100 if (speed & IXGBE_LINK_SPEED_100_FULL) { 1101 /* Set or unset auto-negotiation 100M advertisement */ 1102 hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, 1103 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1104 &autoneg_reg); 1105 1106 autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE; 1107 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) 1108 autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; 1109 1110 hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, 1111 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 1112 autoneg_reg); 1113 } 1114 1115 /* Blocked by MNG FW so don't reset PHY */ 1116 if (ixgbe_check_reset_blocked(hw)) 1117 return status; 1118 1119 /* Restart PHY auto-negotiation. */ 1120 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, 1121 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); 1122 1123 autoneg_reg |= IXGBE_MII_RESTART; 1124 1125 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, 1126 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); 1127 1128 return status; 1129} 1130 1131/** 1132 * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version 1133 * @hw: pointer to hardware structure 1134 * @firmware_version: pointer to the PHY Firmware Version 1135 **/ 1136s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, 1137 u16 *firmware_version) 1138{ 1139 s32 status; 1140 1141 DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx"); 1142 1143 status = hw->phy.ops.read_reg(hw, TNX_FW_REV, 1144 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 1145 firmware_version); 1146 1147 return status; 1148} 1149 1150/** 1151 * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version 1152 * @hw: pointer to hardware structure 1153 * @firmware_version: pointer to the PHY Firmware Version 1154 **/ 1155s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, 1156 u16 *firmware_version) 1157{ 1158 s32 status; 1159 1160 DEBUGFUNC("ixgbe_get_phy_firmware_version_generic"); 1161 1162 status = hw->phy.ops.read_reg(hw, AQ_FW_REV, 1163 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 1164 firmware_version); 1165 1166 return status; 1167} 1168 1169/** 1170 * ixgbe_reset_phy_nl - Performs a PHY reset 1171 * @hw: pointer to hardware structure 1172 **/ 1173s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) 1174{ 1175 u16 phy_offset, control, eword, edata, block_crc; 1176 bool end_data = FALSE; 1177 u16 list_offset, data_offset; 1178 u16 phy_data = 0; 1179 s32 ret_val = IXGBE_SUCCESS; 1180 u32 i; 1181 1182 DEBUGFUNC("ixgbe_reset_phy_nl"); 1183 1184 /* Blocked by MNG FW so bail */ 1185 if (ixgbe_check_reset_blocked(hw)) 1186 goto out; 1187 1188 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, 1189 IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); 1190 1191 /* reset the PHY and poll for completion */ 1192 hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, 1193 IXGBE_MDIO_PHY_XS_DEV_TYPE, 1194 (phy_data | IXGBE_MDIO_PHY_XS_RESET)); 1195 1196 for (i = 0; i < 100; i++) { 1197 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, 1198 IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); 1199 if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) 1200 break; 1201 msec_delay(10); 1202 } 1203 1204 if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { 1205 DEBUGOUT("PHY reset did not complete.\n"); 1206 ret_val = IXGBE_ERR_PHY; 1207 goto out; 1208 } 1209 1210 /* Get init offsets */ 1211 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, 1212 &data_offset); 1213 if (ret_val != IXGBE_SUCCESS) 1214 goto out; 1215 1216 ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); 1217 data_offset++; 1218 while (!end_data) { 1219 /* 1220 * Read control word from PHY init contents offset 1221 */ 1222 ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); 1223 if (ret_val) 1224 goto err_eeprom; 1225 control = (eword & IXGBE_CONTROL_MASK_NL) >> 1226 IXGBE_CONTROL_SHIFT_NL; 1227 edata = eword & IXGBE_DATA_MASK_NL; 1228 switch (control) { 1229 case IXGBE_DELAY_NL: 1230 data_offset++; 1231 DEBUGOUT1("DELAY: %d MS\n", edata); 1232 msec_delay(edata); 1233 break; 1234 case IXGBE_DATA_NL: 1235 DEBUGOUT("DATA:\n"); 1236 data_offset++; 1237 ret_val = hw->eeprom.ops.read(hw, data_offset, 1238 &phy_offset); 1239 if (ret_val) 1240 goto err_eeprom; 1241 data_offset++; 1242 for (i = 0; i < edata; i++) { 1243 ret_val = hw->eeprom.ops.read(hw, data_offset, 1244 &eword); 1245 if (ret_val) 1246 goto err_eeprom; 1247 hw->phy.ops.write_reg(hw, phy_offset, 1248 IXGBE_TWINAX_DEV, eword); 1249 DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword, 1250 phy_offset); 1251 data_offset++; 1252 phy_offset++; 1253 } 1254 break; 1255 case IXGBE_CONTROL_NL: 1256 data_offset++; 1257 DEBUGOUT("CONTROL:\n"); 1258 if (edata == IXGBE_CONTROL_EOL_NL) { 1259 DEBUGOUT("EOL\n"); 1260 end_data = TRUE; 1261 } else if (edata == IXGBE_CONTROL_SOL_NL) { 1262 DEBUGOUT("SOL\n"); 1263 } else { 1264 DEBUGOUT("Bad control value\n"); 1265 ret_val = IXGBE_ERR_PHY; 1266 goto out; 1267 } 1268 break; 1269 default: 1270 DEBUGOUT("Bad control type\n"); 1271 ret_val = IXGBE_ERR_PHY; 1272 goto out; 1273 } 1274 } 1275 1276out: 1277 return ret_val; 1278 1279err_eeprom: 1280 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 1281 "eeprom read at offset %d failed", data_offset); 1282 return IXGBE_ERR_PHY; 1283} 1284 1285/** 1286 * ixgbe_identify_module_generic - Identifies module type 1287 * @hw: pointer to hardware structure 1288 * 1289 * Determines HW type and calls appropriate function. 1290 **/ 1291s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) 1292{ 1293 s32 status = IXGBE_ERR_SFP_NOT_PRESENT; 1294 1295 DEBUGFUNC("ixgbe_identify_module_generic"); 1296 1297 switch (hw->mac.ops.get_media_type(hw)) { 1298 case ixgbe_media_type_fiber: 1299 status = ixgbe_identify_sfp_module_generic(hw); 1300 break; 1301 1302 case ixgbe_media_type_fiber_qsfp: 1303 status = ixgbe_identify_qsfp_module_generic(hw); 1304 break; 1305 1306 default: 1307 hw->phy.sfp_type = ixgbe_sfp_type_not_present; 1308 status = IXGBE_ERR_SFP_NOT_PRESENT; 1309 break; 1310 } 1311 1312 return status; 1313} 1314 1315/** 1316 * ixgbe_identify_sfp_module_generic - Identifies SFP modules 1317 * @hw: pointer to hardware structure 1318 * 1319 * Searches for and identifies the SFP module and assigns appropriate PHY type. 1320 **/ 1321s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) 1322{ 1323 s32 status = IXGBE_ERR_PHY_ADDR_INVALID; 1324 u32 vendor_oui = 0; 1325 enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; 1326 u8 identifier = 0; 1327 u8 comp_codes_1g = 0; 1328 u8 comp_codes_10g = 0; 1329 u8 oui_bytes[3] = {0, 0, 0}; 1330 u8 cable_tech = 0; 1331 u8 cable_spec = 0; 1332 u16 enforce_sfp = 0; 1333 1334 DEBUGFUNC("ixgbe_identify_sfp_module_generic"); 1335 1336 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { 1337 hw->phy.sfp_type = ixgbe_sfp_type_not_present; 1338 status = IXGBE_ERR_SFP_NOT_PRESENT; 1339 goto out; 1340 } 1341 1342 /* LAN ID is needed for I2C access */ 1343 hw->mac.ops.set_lan_id(hw); 1344 1345 status = hw->phy.ops.read_i2c_eeprom(hw, 1346 IXGBE_SFF_IDENTIFIER, 1347 &identifier); 1348 1349 if (status != IXGBE_SUCCESS) 1350 goto err_read_i2c_eeprom; 1351 1352 if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { 1353 hw->phy.type = ixgbe_phy_sfp_unsupported; 1354 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1355 } else { 1356 status = hw->phy.ops.read_i2c_eeprom(hw, 1357 IXGBE_SFF_1GBE_COMP_CODES, 1358 &comp_codes_1g); 1359 1360 if (status != IXGBE_SUCCESS) 1361 goto err_read_i2c_eeprom; 1362 1363 status = hw->phy.ops.read_i2c_eeprom(hw, 1364 IXGBE_SFF_10GBE_COMP_CODES, 1365 &comp_codes_10g); 1366 1367 if (status != IXGBE_SUCCESS) 1368 goto err_read_i2c_eeprom; 1369 status = hw->phy.ops.read_i2c_eeprom(hw, 1370 IXGBE_SFF_CABLE_TECHNOLOGY, 1371 &cable_tech); 1372 1373 if (status != IXGBE_SUCCESS) 1374 goto err_read_i2c_eeprom; 1375 1376 /* ID Module 1377 * ========= 1378 * 0 SFP_DA_CU 1379 * 1 SFP_SR 1380 * 2 SFP_LR 1381 * 3 SFP_DA_CORE0 - 82599-specific 1382 * 4 SFP_DA_CORE1 - 82599-specific 1383 * 5 SFP_SR/LR_CORE0 - 82599-specific 1384 * 6 SFP_SR/LR_CORE1 - 82599-specific 1385 * 7 SFP_act_lmt_DA_CORE0 - 82599-specific 1386 * 8 SFP_act_lmt_DA_CORE1 - 82599-specific 1387 * 9 SFP_1g_cu_CORE0 - 82599-specific 1388 * 10 SFP_1g_cu_CORE1 - 82599-specific 1389 * 11 SFP_1g_sx_CORE0 - 82599-specific 1390 * 12 SFP_1g_sx_CORE1 - 82599-specific 1391 */ 1392 if (hw->mac.type == ixgbe_mac_82598EB) { 1393 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) 1394 hw->phy.sfp_type = ixgbe_sfp_type_da_cu; 1395 else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) 1396 hw->phy.sfp_type = ixgbe_sfp_type_sr; 1397 else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) 1398 hw->phy.sfp_type = ixgbe_sfp_type_lr; 1399 else 1400 hw->phy.sfp_type = ixgbe_sfp_type_unknown; 1401 } else { 1402 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { 1403 if (hw->bus.lan_id == 0) 1404 hw->phy.sfp_type = 1405 ixgbe_sfp_type_da_cu_core0; 1406 else 1407 hw->phy.sfp_type = 1408 ixgbe_sfp_type_da_cu_core1; 1409 } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { 1410 hw->phy.ops.read_i2c_eeprom( 1411 hw, IXGBE_SFF_CABLE_SPEC_COMP, 1412 &cable_spec); 1413 if (cable_spec & 1414 IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { 1415 if (hw->bus.lan_id == 0) 1416 hw->phy.sfp_type = 1417 ixgbe_sfp_type_da_act_lmt_core0; 1418 else 1419 hw->phy.sfp_type = 1420 ixgbe_sfp_type_da_act_lmt_core1; 1421 } else { 1422 hw->phy.sfp_type = 1423 ixgbe_sfp_type_unknown; 1424 } 1425 } else if (comp_codes_10g & 1426 (IXGBE_SFF_10GBASESR_CAPABLE | 1427 IXGBE_SFF_10GBASELR_CAPABLE)) { 1428 if (hw->bus.lan_id == 0) 1429 hw->phy.sfp_type = 1430 ixgbe_sfp_type_srlr_core0; 1431 else 1432 hw->phy.sfp_type = 1433 ixgbe_sfp_type_srlr_core1; 1434 } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { 1435 if (hw->bus.lan_id == 0) 1436 hw->phy.sfp_type = 1437 ixgbe_sfp_type_1g_cu_core0; 1438 else 1439 hw->phy.sfp_type = 1440 ixgbe_sfp_type_1g_cu_core1; 1441 } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { 1442 if (hw->bus.lan_id == 0) 1443 hw->phy.sfp_type = 1444 ixgbe_sfp_type_1g_sx_core0; 1445 else 1446 hw->phy.sfp_type = 1447 ixgbe_sfp_type_1g_sx_core1; 1448 } else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) { 1449 if (hw->bus.lan_id == 0) 1450 hw->phy.sfp_type = 1451 ixgbe_sfp_type_1g_lx_core0; 1452 else 1453 hw->phy.sfp_type = 1454 ixgbe_sfp_type_1g_lx_core1; 1455 } else { 1456 hw->phy.sfp_type = ixgbe_sfp_type_unknown; 1457 } 1458 } 1459 1460 if (hw->phy.sfp_type != stored_sfp_type) 1461 hw->phy.sfp_setup_needed = TRUE; 1462 1463 /* Determine if the SFP+ PHY is dual speed or not. */ 1464 hw->phy.multispeed_fiber = FALSE; 1465 if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && 1466 (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || 1467 ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && 1468 (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) 1469 hw->phy.multispeed_fiber = TRUE; 1470 1471 /* Determine PHY vendor */ 1472 if (hw->phy.type != ixgbe_phy_nl) { 1473 hw->phy.id = identifier; 1474 status = hw->phy.ops.read_i2c_eeprom(hw, 1475 IXGBE_SFF_VENDOR_OUI_BYTE0, 1476 &oui_bytes[0]); 1477 1478 if (status != IXGBE_SUCCESS) 1479 goto err_read_i2c_eeprom; 1480 1481 status = hw->phy.ops.read_i2c_eeprom(hw, 1482 IXGBE_SFF_VENDOR_OUI_BYTE1, 1483 &oui_bytes[1]); 1484 1485 if (status != IXGBE_SUCCESS) 1486 goto err_read_i2c_eeprom; 1487 1488 status = hw->phy.ops.read_i2c_eeprom(hw, 1489 IXGBE_SFF_VENDOR_OUI_BYTE2, 1490 &oui_bytes[2]); 1491 1492 if (status != IXGBE_SUCCESS) 1493 goto err_read_i2c_eeprom; 1494 1495 vendor_oui = 1496 ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | 1497 (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | 1498 (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); 1499 1500 switch (vendor_oui) { 1501 case IXGBE_SFF_VENDOR_OUI_TYCO: 1502 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) 1503 hw->phy.type = 1504 ixgbe_phy_sfp_passive_tyco; 1505 break; 1506 case IXGBE_SFF_VENDOR_OUI_FTL: 1507 if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) 1508 hw->phy.type = ixgbe_phy_sfp_ftl_active; 1509 else 1510 hw->phy.type = ixgbe_phy_sfp_ftl; 1511 break; 1512 case IXGBE_SFF_VENDOR_OUI_AVAGO: 1513 hw->phy.type = ixgbe_phy_sfp_avago; 1514 break; 1515 case IXGBE_SFF_VENDOR_OUI_INTEL: 1516 hw->phy.type = ixgbe_phy_sfp_intel; 1517 break; 1518 default: 1519 if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) 1520 hw->phy.type = 1521 ixgbe_phy_sfp_passive_unknown; 1522 else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) 1523 hw->phy.type = 1524 ixgbe_phy_sfp_active_unknown; 1525 else 1526 hw->phy.type = ixgbe_phy_sfp_unknown; 1527 break; 1528 } 1529 } 1530 1531 /* Allow any DA cable vendor */ 1532 if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | 1533 IXGBE_SFF_DA_ACTIVE_CABLE)) { 1534 status = IXGBE_SUCCESS; 1535 goto out; 1536 } 1537 1538 /* Verify supported 1G SFP modules */ 1539 if (comp_codes_10g == 0 && 1540 !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || 1541 hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || 1542 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 1543 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || 1544 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 1545 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { 1546 hw->phy.type = ixgbe_phy_sfp_unsupported; 1547 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1548 goto out; 1549 } 1550 1551 /* Anything else 82598-based is supported */ 1552 if (hw->mac.type == ixgbe_mac_82598EB) { 1553 status = IXGBE_SUCCESS; 1554 goto out; 1555 } 1556 1557 ixgbe_get_device_caps(hw, &enforce_sfp); 1558 if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && 1559 !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || 1560 hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || 1561 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 1562 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || 1563 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 1564 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { 1565 /* Make sure we're a supported PHY type */ 1566 if (hw->phy.type == ixgbe_phy_sfp_intel) { 1567 status = IXGBE_SUCCESS; 1568 } else { 1569 if (hw->allow_unsupported_sfp == TRUE) { 1570 EWARN(hw, "WARNING: Intel (R) Network " 1571 "Connections are quality tested " 1572 "using Intel (R) Ethernet Optics." 1573 " Using untested modules is not " 1574 "supported and may cause unstable" 1575 " operation or damage to the " 1576 "module or the adapter. Intel " 1577 "Corporation is not responsible " 1578 "for any harm caused by using " 1579 "untested modules.\n", status); 1580 status = IXGBE_SUCCESS; 1581 } else { 1582 DEBUGOUT("SFP+ module not supported\n"); 1583 hw->phy.type = 1584 ixgbe_phy_sfp_unsupported; 1585 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1586 } 1587 } 1588 } else { 1589 status = IXGBE_SUCCESS; 1590 } 1591 } 1592 1593out: 1594 return status; 1595 1596err_read_i2c_eeprom: 1597 hw->phy.sfp_type = ixgbe_sfp_type_not_present; 1598 if (hw->phy.type != ixgbe_phy_nl) { 1599 hw->phy.id = 0; 1600 hw->phy.type = ixgbe_phy_unknown; 1601 } 1602 return IXGBE_ERR_SFP_NOT_PRESENT; 1603} 1604 1605/** 1606 * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type 1607 * @hw: pointer to hardware structure 1608 * 1609 * Determines physical layer capabilities of the current SFP. 1610 */ 1611s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw) 1612{ 1613 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1614 u8 comp_codes_10g = 0; 1615 u8 comp_codes_1g = 0; 1616 1617 DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic"); 1618 1619 hw->phy.ops.identify_sfp(hw); 1620 if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) 1621 return physical_layer; 1622 1623 switch (hw->phy.type) { 1624 case ixgbe_phy_sfp_passive_tyco: 1625 case ixgbe_phy_sfp_passive_unknown: 1626 case ixgbe_phy_qsfp_passive_unknown: 1627 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1628 break; 1629 case ixgbe_phy_sfp_ftl_active: 1630 case ixgbe_phy_sfp_active_unknown: 1631 case ixgbe_phy_qsfp_active_unknown: 1632 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; 1633 break; 1634 case ixgbe_phy_sfp_avago: 1635 case ixgbe_phy_sfp_ftl: 1636 case ixgbe_phy_sfp_intel: 1637 case ixgbe_phy_sfp_unknown: 1638 hw->phy.ops.read_i2c_eeprom(hw, 1639 IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); 1640 hw->phy.ops.read_i2c_eeprom(hw, 1641 IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); 1642 if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) 1643 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1644 else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) 1645 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1646 else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) 1647 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; 1648 else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) 1649 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX; 1650 break; 1651 case ixgbe_phy_qsfp_intel: 1652 case ixgbe_phy_qsfp_unknown: 1653 hw->phy.ops.read_i2c_eeprom(hw, 1654 IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); 1655 if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) 1656 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1657 else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) 1658 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1659 break; 1660 default: 1661 break; 1662 } 1663 1664 return physical_layer; 1665} 1666 1667/** 1668 * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules 1669 * @hw: pointer to hardware structure 1670 * 1671 * Searches for and identifies the QSFP module and assigns appropriate PHY type 1672 **/ 1673s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) 1674{ 1675 s32 status = IXGBE_ERR_PHY_ADDR_INVALID; 1676 u32 vendor_oui = 0; 1677 enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; 1678 u8 identifier = 0; 1679 u8 comp_codes_1g = 0; 1680 u8 comp_codes_10g = 0; 1681 u8 oui_bytes[3] = {0, 0, 0}; 1682 u16 enforce_sfp = 0; 1683 u8 connector = 0; 1684 u8 cable_length = 0; 1685 u8 device_tech = 0; 1686 bool active_cable = FALSE; 1687 1688 DEBUGFUNC("ixgbe_identify_qsfp_module_generic"); 1689 1690 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { 1691 hw->phy.sfp_type = ixgbe_sfp_type_not_present; 1692 status = IXGBE_ERR_SFP_NOT_PRESENT; 1693 goto out; 1694 } 1695 1696 /* LAN ID is needed for I2C access */ 1697 hw->mac.ops.set_lan_id(hw); 1698 1699 status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, 1700 &identifier); 1701 1702 if (status != IXGBE_SUCCESS) 1703 goto err_read_i2c_eeprom; 1704 1705 if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) { 1706 hw->phy.type = ixgbe_phy_sfp_unsupported; 1707 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1708 goto out; 1709 } 1710 1711 hw->phy.id = identifier; 1712 1713 status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP, 1714 &comp_codes_10g); 1715 1716 if (status != IXGBE_SUCCESS) 1717 goto err_read_i2c_eeprom; 1718 1719 status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP, 1720 &comp_codes_1g); 1721 1722 if (status != IXGBE_SUCCESS) 1723 goto err_read_i2c_eeprom; 1724 1725 if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) { 1726 hw->phy.type = ixgbe_phy_qsfp_passive_unknown; 1727 if (hw->bus.lan_id == 0) 1728 hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0; 1729 else 1730 hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1; 1731 } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | 1732 IXGBE_SFF_10GBASELR_CAPABLE)) { 1733 if (hw->bus.lan_id == 0) 1734 hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0; 1735 else 1736 hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1; 1737 } else { 1738 if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) 1739 active_cable = TRUE; 1740 1741 if (!active_cable) { 1742 /* check for active DA cables that pre-date 1743 * SFF-8436 v3.6 */ 1744 hw->phy.ops.read_i2c_eeprom(hw, 1745 IXGBE_SFF_QSFP_CONNECTOR, 1746 &connector); 1747 1748 hw->phy.ops.read_i2c_eeprom(hw, 1749 IXGBE_SFF_QSFP_CABLE_LENGTH, 1750 &cable_length); 1751 1752 hw->phy.ops.read_i2c_eeprom(hw, 1753 IXGBE_SFF_QSFP_DEVICE_TECH, 1754 &device_tech); 1755 1756 if ((connector == 1757 IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) && 1758 (cable_length > 0) && 1759 ((device_tech >> 4) == 1760 IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL)) 1761 active_cable = TRUE; 1762 } 1763 1764 if (active_cable) { 1765 hw->phy.type = ixgbe_phy_qsfp_active_unknown; 1766 if (hw->bus.lan_id == 0) 1767 hw->phy.sfp_type = 1768 ixgbe_sfp_type_da_act_lmt_core0; 1769 else 1770 hw->phy.sfp_type = 1771 ixgbe_sfp_type_da_act_lmt_core1; 1772 } else { 1773 /* unsupported module type */ 1774 hw->phy.type = ixgbe_phy_sfp_unsupported; 1775 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1776 goto out; 1777 } 1778 } 1779 1780 if (hw->phy.sfp_type != stored_sfp_type) 1781 hw->phy.sfp_setup_needed = TRUE; 1782 1783 /* Determine if the QSFP+ PHY is dual speed or not. */ 1784 hw->phy.multispeed_fiber = FALSE; 1785 if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && 1786 (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || 1787 ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && 1788 (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) 1789 hw->phy.multispeed_fiber = TRUE; 1790 1791 /* Determine PHY vendor for optical modules */ 1792 if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | 1793 IXGBE_SFF_10GBASELR_CAPABLE)) { 1794 status = hw->phy.ops.read_i2c_eeprom(hw, 1795 IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0, 1796 &oui_bytes[0]); 1797 1798 if (status != IXGBE_SUCCESS) 1799 goto err_read_i2c_eeprom; 1800 1801 status = hw->phy.ops.read_i2c_eeprom(hw, 1802 IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1, 1803 &oui_bytes[1]); 1804 1805 if (status != IXGBE_SUCCESS) 1806 goto err_read_i2c_eeprom; 1807 1808 status = hw->phy.ops.read_i2c_eeprom(hw, 1809 IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2, 1810 &oui_bytes[2]); 1811 1812 if (status != IXGBE_SUCCESS) 1813 goto err_read_i2c_eeprom; 1814 1815 vendor_oui = 1816 ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | 1817 (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | 1818 (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); 1819 1820 if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL) 1821 hw->phy.type = ixgbe_phy_qsfp_intel; 1822 else 1823 hw->phy.type = ixgbe_phy_qsfp_unknown; 1824 1825 ixgbe_get_device_caps(hw, &enforce_sfp); 1826 if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) { 1827 /* Make sure we're a supported PHY type */ 1828 if (hw->phy.type == ixgbe_phy_qsfp_intel) { 1829 status = IXGBE_SUCCESS; 1830 } else { 1831 if (hw->allow_unsupported_sfp == TRUE) { 1832 EWARN(hw, "WARNING: Intel (R) Network " 1833 "Connections are quality tested " 1834 "using Intel (R) Ethernet Optics." 1835 " Using untested modules is not " 1836 "supported and may cause unstable" 1837 " operation or damage to the " 1838 "module or the adapter. Intel " 1839 "Corporation is not responsible " 1840 "for any harm caused by using " 1841 "untested modules.\n", status); 1842 status = IXGBE_SUCCESS; 1843 } else { 1844 DEBUGOUT("QSFP module not supported\n"); 1845 hw->phy.type = 1846 ixgbe_phy_sfp_unsupported; 1847 status = IXGBE_ERR_SFP_NOT_SUPPORTED; 1848 } 1849 } 1850 } else { 1851 status = IXGBE_SUCCESS; 1852 } 1853 } 1854 1855out: 1856 return status; 1857 1858err_read_i2c_eeprom: 1859 hw->phy.sfp_type = ixgbe_sfp_type_not_present; 1860 hw->phy.id = 0; 1861 hw->phy.type = ixgbe_phy_unknown; 1862 1863 return IXGBE_ERR_SFP_NOT_PRESENT; 1864} 1865 1866 1867/** 1868 * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence 1869 * @hw: pointer to hardware structure 1870 * @list_offset: offset to the SFP ID list 1871 * @data_offset: offset to the SFP data block 1872 * 1873 * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if 1874 * so it returns the offsets to the phy init sequence block. 1875 **/ 1876s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, 1877 u16 *list_offset, 1878 u16 *data_offset) 1879{ 1880 u16 sfp_id; 1881 u16 sfp_type = hw->phy.sfp_type; 1882 1883 DEBUGFUNC("ixgbe_get_sfp_init_sequence_offsets"); 1884 1885 if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) 1886 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1887 1888 if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) 1889 return IXGBE_ERR_SFP_NOT_PRESENT; 1890 1891 if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && 1892 (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) 1893 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1894 1895 /* 1896 * Limiting active cables and 1G Phys must be initialized as 1897 * SR modules 1898 */ 1899 if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || 1900 sfp_type == ixgbe_sfp_type_1g_lx_core0 || 1901 sfp_type == ixgbe_sfp_type_1g_cu_core0 || 1902 sfp_type == ixgbe_sfp_type_1g_sx_core0) 1903 sfp_type = ixgbe_sfp_type_srlr_core0; 1904 else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || 1905 sfp_type == ixgbe_sfp_type_1g_lx_core1 || 1906 sfp_type == ixgbe_sfp_type_1g_cu_core1 || 1907 sfp_type == ixgbe_sfp_type_1g_sx_core1) 1908 sfp_type = ixgbe_sfp_type_srlr_core1; 1909 1910 /* Read offset to PHY init contents */ 1911 if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { 1912 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 1913 "eeprom read at offset %d failed", 1914 IXGBE_PHY_INIT_OFFSET_NL); 1915 return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; 1916 } 1917 1918 if ((!*list_offset) || (*list_offset == 0xFFFF)) 1919 return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; 1920 1921 /* Shift offset to first ID word */ 1922 (*list_offset)++; 1923 1924 /* 1925 * Find the matching SFP ID in the EEPROM 1926 * and program the init sequence 1927 */ 1928 if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) 1929 goto err_phy; 1930 1931 while (sfp_id != IXGBE_PHY_INIT_END_NL) { 1932 if (sfp_id == sfp_type) { 1933 (*list_offset)++; 1934 if (hw->eeprom.ops.read(hw, *list_offset, data_offset)) 1935 goto err_phy; 1936 if ((!*data_offset) || (*data_offset == 0xFFFF)) { 1937 DEBUGOUT("SFP+ module not supported\n"); 1938 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1939 } else { 1940 break; 1941 } 1942 } else { 1943 (*list_offset) += 2; 1944 if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) 1945 goto err_phy; 1946 } 1947 } 1948 1949 if (sfp_id == IXGBE_PHY_INIT_END_NL) { 1950 DEBUGOUT("No matching SFP+ module found\n"); 1951 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1952 } 1953 1954 return IXGBE_SUCCESS; 1955 1956err_phy: 1957 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 1958 "eeprom read at offset %d failed", *list_offset); 1959 return IXGBE_ERR_PHY; 1960} 1961 1962/** 1963 * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface 1964 * @hw: pointer to hardware structure 1965 * @byte_offset: EEPROM byte offset to read 1966 * @eeprom_data: value read 1967 * 1968 * Performs byte read operation to SFP module's EEPROM over I2C interface. 1969 **/ 1970s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, 1971 u8 *eeprom_data) 1972{ 1973 DEBUGFUNC("ixgbe_read_i2c_eeprom_generic"); 1974 1975 return hw->phy.ops.read_i2c_byte(hw, byte_offset, 1976 IXGBE_I2C_EEPROM_DEV_ADDR, 1977 eeprom_data); 1978} 1979 1980/** 1981 * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface 1982 * @hw: pointer to hardware structure 1983 * @byte_offset: byte offset at address 0xA2 1984 * @eeprom_data: value read 1985 * 1986 * Performs byte read operation to SFP module's SFF-8472 data over I2C 1987 **/ 1988static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, 1989 u8 *sff8472_data) 1990{ 1991 return hw->phy.ops.read_i2c_byte(hw, byte_offset, 1992 IXGBE_I2C_EEPROM_DEV_ADDR2, 1993 sff8472_data); 1994} 1995 1996/** 1997 * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface 1998 * @hw: pointer to hardware structure 1999 * @byte_offset: EEPROM byte offset to write 2000 * @eeprom_data: value to write 2001 * 2002 * Performs byte write operation to SFP module's EEPROM over I2C interface. 2003 **/ 2004s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, 2005 u8 eeprom_data) 2006{ 2007 DEBUGFUNC("ixgbe_write_i2c_eeprom_generic"); 2008 2009 return hw->phy.ops.write_i2c_byte(hw, byte_offset, 2010 IXGBE_I2C_EEPROM_DEV_ADDR, 2011 eeprom_data); 2012} 2013 2014/** 2015 * ixgbe_is_sfp_probe - Returns TRUE if SFP is being detected 2016 * @hw: pointer to hardware structure 2017 * @offset: eeprom offset to be read 2018 * @addr: I2C address to be read 2019 */ 2020static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) 2021{ 2022 if (addr == IXGBE_I2C_EEPROM_DEV_ADDR && 2023 offset == IXGBE_SFF_IDENTIFIER && 2024 hw->phy.sfp_type == ixgbe_sfp_type_not_present) 2025 return TRUE; 2026 return FALSE; 2027} 2028 2029/** 2030 * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C 2031 * @hw: pointer to hardware structure 2032 * @byte_offset: byte offset to read 2033 * @data: value read 2034 * @lock: TRUE if to take and release semaphore 2035 * 2036 * Performs byte read operation to SFP module's EEPROM over I2C interface at 2037 * a specified device address. 2038 **/ 2039static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, 2040 u8 dev_addr, u8 *data, bool lock) 2041{ 2042 s32 status; 2043 u32 max_retry = 10; 2044 u32 retry = 0; 2045 u32 swfw_mask = hw->phy.phy_semaphore_mask; 2046 bool nack = 1; 2047 *data = 0; 2048 2049 DEBUGFUNC("ixgbe_read_i2c_byte_generic"); 2050 2051 if (hw->mac.type >= ixgbe_mac_X550) 2052 max_retry = 3; 2053 if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr)) 2054 max_retry = IXGBE_SFP_DETECT_RETRIES; 2055 2056 do { 2057 if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) 2058 return IXGBE_ERR_SWFW_SYNC; 2059 2060 ixgbe_i2c_start(hw); 2061 2062 /* Device Address and write indication */ 2063 status = ixgbe_clock_out_i2c_byte(hw, dev_addr); 2064 if (status != IXGBE_SUCCESS) 2065 goto fail; 2066 2067 status = ixgbe_get_i2c_ack(hw); 2068 if (status != IXGBE_SUCCESS) 2069 goto fail; 2070 2071 status = ixgbe_clock_out_i2c_byte(hw, byte_offset); 2072 if (status != IXGBE_SUCCESS) 2073 goto fail; 2074 2075 status = ixgbe_get_i2c_ack(hw); 2076 if (status != IXGBE_SUCCESS) 2077 goto fail; 2078 2079 ixgbe_i2c_start(hw); 2080 2081 /* Device Address and read indication */ 2082 status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); 2083 if (status != IXGBE_SUCCESS) 2084 goto fail; 2085 2086 status = ixgbe_get_i2c_ack(hw); 2087 if (status != IXGBE_SUCCESS) 2088 goto fail; 2089 2090 status = ixgbe_clock_in_i2c_byte(hw, data); 2091 if (status != IXGBE_SUCCESS) 2092 goto fail; 2093 2094 status = ixgbe_clock_out_i2c_bit(hw, nack); 2095 if (status != IXGBE_SUCCESS) 2096 goto fail; 2097 2098 ixgbe_i2c_stop(hw); 2099 if (lock) 2100 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 2101 return IXGBE_SUCCESS; 2102 2103fail: 2104 ixgbe_i2c_bus_clear(hw); 2105 if (lock) { 2106 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 2107 msec_delay(100); 2108 } 2109 retry++; 2110 if (retry < max_retry) 2111 DEBUGOUT("I2C byte read error - Retrying.\n"); 2112 else 2113 DEBUGOUT("I2C byte read error.\n"); 2114 2115 } while (retry < max_retry); 2116 2117 return status; 2118} 2119 2120/** 2121 * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C 2122 * @hw: pointer to hardware structure 2123 * @byte_offset: byte offset to read 2124 * @data: value read 2125 * 2126 * Performs byte read operation to SFP module's EEPROM over I2C interface at 2127 * a specified device address. 2128 **/ 2129s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, 2130 u8 dev_addr, u8 *data) 2131{ 2132 return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, 2133 data, TRUE); 2134} 2135 2136/** 2137 * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C 2138 * @hw: pointer to hardware structure 2139 * @byte_offset: byte offset to read 2140 * @data: value read 2141 * 2142 * Performs byte read operation to SFP module's EEPROM over I2C interface at 2143 * a specified device address. 2144 **/ 2145s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, 2146 u8 dev_addr, u8 *data) 2147{ 2148 return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, 2149 data, FALSE); 2150} 2151 2152/** 2153 * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C 2154 * @hw: pointer to hardware structure 2155 * @byte_offset: byte offset to write 2156 * @data: value to write 2157 * @lock: TRUE if to take and release semaphore 2158 * 2159 * Performs byte write operation to SFP module's EEPROM over I2C interface at 2160 * a specified device address. 2161 **/ 2162static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, 2163 u8 dev_addr, u8 data, bool lock) 2164{ 2165 s32 status; 2166 u32 max_retry = 1; 2167 u32 retry = 0; 2168 u32 swfw_mask = hw->phy.phy_semaphore_mask; 2169 2170 DEBUGFUNC("ixgbe_write_i2c_byte_generic"); 2171 2172 if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 2173 IXGBE_SUCCESS) 2174 return IXGBE_ERR_SWFW_SYNC; 2175 2176 do { 2177 ixgbe_i2c_start(hw); 2178 2179 status = ixgbe_clock_out_i2c_byte(hw, dev_addr); 2180 if (status != IXGBE_SUCCESS) 2181 goto fail; 2182 2183 status = ixgbe_get_i2c_ack(hw); 2184 if (status != IXGBE_SUCCESS) 2185 goto fail; 2186 2187 status = ixgbe_clock_out_i2c_byte(hw, byte_offset); 2188 if (status != IXGBE_SUCCESS) 2189 goto fail; 2190 2191 status = ixgbe_get_i2c_ack(hw); 2192 if (status != IXGBE_SUCCESS) 2193 goto fail; 2194 2195 status = ixgbe_clock_out_i2c_byte(hw, data); 2196 if (status != IXGBE_SUCCESS) 2197 goto fail; 2198 2199 status = ixgbe_get_i2c_ack(hw); 2200 if (status != IXGBE_SUCCESS) 2201 goto fail; 2202 2203 ixgbe_i2c_stop(hw); 2204 if (lock) 2205 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 2206 return IXGBE_SUCCESS; 2207 2208fail: 2209 ixgbe_i2c_bus_clear(hw); 2210 retry++; 2211 if (retry < max_retry) 2212 DEBUGOUT("I2C byte write error - Retrying.\n"); 2213 else 2214 DEBUGOUT("I2C byte write error.\n"); 2215 } while (retry < max_retry); 2216 2217 if (lock) 2218 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 2219 2220 return status; 2221} 2222 2223/** 2224 * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C 2225 * @hw: pointer to hardware structure 2226 * @byte_offset: byte offset to write 2227 * @data: value to write 2228 * 2229 * Performs byte write operation to SFP module's EEPROM over I2C interface at 2230 * a specified device address. 2231 **/ 2232s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, 2233 u8 dev_addr, u8 data) 2234{ 2235 return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, 2236 data, TRUE); 2237} 2238 2239/** 2240 * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C 2241 * @hw: pointer to hardware structure 2242 * @byte_offset: byte offset to write 2243 * @data: value to write 2244 * 2245 * Performs byte write operation to SFP module's EEPROM over I2C interface at 2246 * a specified device address. 2247 **/ 2248s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, 2249 u8 dev_addr, u8 data) 2250{ 2251 return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, 2252 data, FALSE); 2253} 2254 2255/** 2256 * ixgbe_i2c_start - Sets I2C start condition 2257 * @hw: pointer to hardware structure 2258 * 2259 * Sets I2C start condition (High -> Low on SDA while SCL is High) 2260 * Set bit-bang mode on X550 hardware. 2261 **/ 2262static void ixgbe_i2c_start(struct ixgbe_hw *hw) 2263{ 2264 u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2265 2266 DEBUGFUNC("ixgbe_i2c_start"); 2267 2268 i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw); 2269 2270 /* Start condition must begin with data and clock high */ 2271 ixgbe_set_i2c_data(hw, &i2cctl, 1); 2272 ixgbe_raise_i2c_clk(hw, &i2cctl); 2273 2274 /* Setup time for start condition (4.7us) */ 2275 usec_delay(IXGBE_I2C_T_SU_STA); 2276 2277 ixgbe_set_i2c_data(hw, &i2cctl, 0); 2278 2279 /* Hold time for start condition (4us) */ 2280 usec_delay(IXGBE_I2C_T_HD_STA); 2281 2282 ixgbe_lower_i2c_clk(hw, &i2cctl); 2283 2284 /* Minimum low period of clock is 4.7 us */ 2285 usec_delay(IXGBE_I2C_T_LOW); 2286 2287} 2288 2289/** 2290 * ixgbe_i2c_stop - Sets I2C stop condition 2291 * @hw: pointer to hardware structure 2292 * 2293 * Sets I2C stop condition (Low -> High on SDA while SCL is High) 2294 * Disables bit-bang mode and negates data output enable on X550 2295 * hardware. 2296 **/ 2297static void ixgbe_i2c_stop(struct ixgbe_hw *hw) 2298{ 2299 u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2300 u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2301 u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw); 2302 u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw); 2303 2304 DEBUGFUNC("ixgbe_i2c_stop"); 2305 2306 /* Stop condition must begin with data low and clock high */ 2307 ixgbe_set_i2c_data(hw, &i2cctl, 0); 2308 ixgbe_raise_i2c_clk(hw, &i2cctl); 2309 2310 /* Setup time for stop condition (4us) */ 2311 usec_delay(IXGBE_I2C_T_SU_STO); 2312 2313 ixgbe_set_i2c_data(hw, &i2cctl, 1); 2314 2315 /* bus free time between stop and start (4.7us)*/ 2316 usec_delay(IXGBE_I2C_T_BUF); 2317 2318 if (bb_en_bit || data_oe_bit || clk_oe_bit) { 2319 i2cctl &= ~bb_en_bit; 2320 i2cctl |= data_oe_bit | clk_oe_bit; 2321 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); 2322 IXGBE_WRITE_FLUSH(hw); 2323 } 2324} 2325 2326/** 2327 * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C 2328 * @hw: pointer to hardware structure 2329 * @data: data byte to clock in 2330 * 2331 * Clocks in one byte data via I2C data/clock 2332 **/ 2333static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) 2334{ 2335 s32 i; 2336 bool bit = 0; 2337 2338 DEBUGFUNC("ixgbe_clock_in_i2c_byte"); 2339 2340 *data = 0; 2341 for (i = 7; i >= 0; i--) { 2342 ixgbe_clock_in_i2c_bit(hw, &bit); 2343 *data |= bit << i; 2344 } 2345 2346 return IXGBE_SUCCESS; 2347} 2348 2349/** 2350 * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C 2351 * @hw: pointer to hardware structure 2352 * @data: data byte clocked out 2353 * 2354 * Clocks out one byte data via I2C data/clock 2355 **/ 2356static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) 2357{ 2358 s32 status = IXGBE_SUCCESS; 2359 s32 i; 2360 u32 i2cctl; 2361 bool bit; 2362 2363 DEBUGFUNC("ixgbe_clock_out_i2c_byte"); 2364 2365 for (i = 7; i >= 0; i--) { 2366 bit = (data >> i) & 0x1; 2367 status = ixgbe_clock_out_i2c_bit(hw, bit); 2368 2369 if (status != IXGBE_SUCCESS) 2370 break; 2371 } 2372 2373 /* Release SDA line (set high) */ 2374 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2375 i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); 2376 i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2377 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); 2378 IXGBE_WRITE_FLUSH(hw); 2379 2380 return status; 2381} 2382 2383/** 2384 * ixgbe_get_i2c_ack - Polls for I2C ACK 2385 * @hw: pointer to hardware structure 2386 * 2387 * Clocks in/out one bit via I2C data/clock 2388 **/ 2389static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) 2390{ 2391 u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2392 s32 status = IXGBE_SUCCESS; 2393 u32 i = 0; 2394 u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2395 u32 timeout = 10; 2396 bool ack = 1; 2397 2398 DEBUGFUNC("ixgbe_get_i2c_ack"); 2399 2400 if (data_oe_bit) { 2401 i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); 2402 i2cctl |= data_oe_bit; 2403 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); 2404 IXGBE_WRITE_FLUSH(hw); 2405 } 2406 ixgbe_raise_i2c_clk(hw, &i2cctl); 2407 2408 /* Minimum high period of clock is 4us */ 2409 usec_delay(IXGBE_I2C_T_HIGH); 2410 2411 /* Poll for ACK. Note that ACK in I2C spec is 2412 * transition from 1 to 0 */ 2413 for (i = 0; i < timeout; i++) { 2414 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2415 ack = ixgbe_get_i2c_data(hw, &i2cctl); 2416 2417 usec_delay(1); 2418 if (!ack) 2419 break; 2420 } 2421 2422 if (ack) { 2423 DEBUGOUT("I2C ack was not received.\n"); 2424 status = IXGBE_ERR_I2C; 2425 } 2426 2427 ixgbe_lower_i2c_clk(hw, &i2cctl); 2428 2429 /* Minimum low period of clock is 4.7 us */ 2430 usec_delay(IXGBE_I2C_T_LOW); 2431 2432 return status; 2433} 2434 2435/** 2436 * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock 2437 * @hw: pointer to hardware structure 2438 * @data: read data value 2439 * 2440 * Clocks in one bit via I2C data/clock 2441 **/ 2442static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) 2443{ 2444 u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2445 u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2446 2447 DEBUGFUNC("ixgbe_clock_in_i2c_bit"); 2448 2449 if (data_oe_bit) { 2450 i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); 2451 i2cctl |= data_oe_bit; 2452 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); 2453 IXGBE_WRITE_FLUSH(hw); 2454 } 2455 ixgbe_raise_i2c_clk(hw, &i2cctl); 2456 2457 /* Minimum high period of clock is 4us */ 2458 usec_delay(IXGBE_I2C_T_HIGH); 2459 2460 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2461 *data = ixgbe_get_i2c_data(hw, &i2cctl); 2462 2463 ixgbe_lower_i2c_clk(hw, &i2cctl); 2464 2465 /* Minimum low period of clock is 4.7 us */ 2466 usec_delay(IXGBE_I2C_T_LOW); 2467 2468 return IXGBE_SUCCESS; 2469} 2470 2471/** 2472 * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock 2473 * @hw: pointer to hardware structure 2474 * @data: data value to write 2475 * 2476 * Clocks out one bit via I2C data/clock 2477 **/ 2478static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) 2479{ 2480 s32 status; 2481 u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2482 2483 DEBUGFUNC("ixgbe_clock_out_i2c_bit"); 2484 2485 status = ixgbe_set_i2c_data(hw, &i2cctl, data); 2486 if (status == IXGBE_SUCCESS) { 2487 ixgbe_raise_i2c_clk(hw, &i2cctl); 2488 2489 /* Minimum high period of clock is 4us */ 2490 usec_delay(IXGBE_I2C_T_HIGH); 2491 2492 ixgbe_lower_i2c_clk(hw, &i2cctl); 2493 2494 /* Minimum low period of clock is 4.7 us. 2495 * This also takes care of the data hold time. 2496 */ 2497 usec_delay(IXGBE_I2C_T_LOW); 2498 } else { 2499 status = IXGBE_ERR_I2C; 2500 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 2501 "I2C data was not set to %X\n", data); 2502 } 2503 2504 return status; 2505} 2506 2507/** 2508 * ixgbe_raise_i2c_clk - Raises the I2C SCL clock 2509 * @hw: pointer to hardware structure 2510 * @i2cctl: Current value of I2CCTL register 2511 * 2512 * Raises the I2C clock line '0'->'1' 2513 * Negates the I2C clock output enable on X550 hardware. 2514 **/ 2515static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) 2516{ 2517 u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw); 2518 u32 i = 0; 2519 u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; 2520 u32 i2cctl_r = 0; 2521 2522 DEBUGFUNC("ixgbe_raise_i2c_clk"); 2523 2524 if (clk_oe_bit) { 2525 *i2cctl |= clk_oe_bit; 2526 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2527 } 2528 2529 for (i = 0; i < timeout; i++) { 2530 *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw); 2531 2532 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2533 IXGBE_WRITE_FLUSH(hw); 2534 /* SCL rise time (1000ns) */ 2535 usec_delay(IXGBE_I2C_T_RISE); 2536 2537 i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2538 if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw)) 2539 break; 2540 } 2541} 2542 2543/** 2544 * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock 2545 * @hw: pointer to hardware structure 2546 * @i2cctl: Current value of I2CCTL register 2547 * 2548 * Lowers the I2C clock line '1'->'0' 2549 * Asserts the I2C clock output enable on X550 hardware. 2550 **/ 2551static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) 2552{ 2553 DEBUGFUNC("ixgbe_lower_i2c_clk"); 2554 2555 *i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw)); 2556 *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw); 2557 2558 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2559 IXGBE_WRITE_FLUSH(hw); 2560 2561 /* SCL fall time (300ns) */ 2562 usec_delay(IXGBE_I2C_T_FALL); 2563} 2564 2565/** 2566 * ixgbe_set_i2c_data - Sets the I2C data bit 2567 * @hw: pointer to hardware structure 2568 * @i2cctl: Current value of I2CCTL register 2569 * @data: I2C data value (0 or 1) to set 2570 * 2571 * Sets the I2C data bit 2572 * Asserts the I2C data output enable on X550 hardware. 2573 **/ 2574static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) 2575{ 2576 u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2577 s32 status = IXGBE_SUCCESS; 2578 2579 DEBUGFUNC("ixgbe_set_i2c_data"); 2580 2581 if (data) 2582 *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); 2583 else 2584 *i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw)); 2585 *i2cctl &= ~data_oe_bit; 2586 2587 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2588 IXGBE_WRITE_FLUSH(hw); 2589 2590 /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ 2591 usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); 2592 2593 if (!data) /* Can't verify data in this case */ 2594 return IXGBE_SUCCESS; 2595 if (data_oe_bit) { 2596 *i2cctl |= data_oe_bit; 2597 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2598 IXGBE_WRITE_FLUSH(hw); 2599 } 2600 2601 /* Verify data was set correctly */ 2602 *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2603 if (data != ixgbe_get_i2c_data(hw, i2cctl)) { 2604 status = IXGBE_ERR_I2C; 2605 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 2606 "Error - I2C data was not set to %X.\n", 2607 data); 2608 } 2609 2610 return status; 2611} 2612 2613/** 2614 * ixgbe_get_i2c_data - Reads the I2C SDA data bit 2615 * @hw: pointer to hardware structure 2616 * @i2cctl: Current value of I2CCTL register 2617 * 2618 * Returns the I2C data bit value 2619 * Negates the I2C data output enable on X550 hardware. 2620 **/ 2621static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) 2622{ 2623 u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw); 2624 bool data; 2625 2626 DEBUGFUNC("ixgbe_get_i2c_data"); 2627 2628 if (data_oe_bit) { 2629 *i2cctl |= data_oe_bit; 2630 IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); 2631 IXGBE_WRITE_FLUSH(hw); 2632 usec_delay(IXGBE_I2C_T_FALL); 2633 } 2634 2635 if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw)) 2636 data = 1; 2637 else 2638 data = 0; 2639 2640 return data; 2641} 2642 2643/** 2644 * ixgbe_i2c_bus_clear - Clears the I2C bus 2645 * @hw: pointer to hardware structure 2646 * 2647 * Clears the I2C bus by sending nine clock pulses. 2648 * Used when data line is stuck low. 2649 **/ 2650void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) 2651{ 2652 u32 i2cctl; 2653 u32 i; 2654 2655 DEBUGFUNC("ixgbe_i2c_bus_clear"); 2656 2657 ixgbe_i2c_start(hw); 2658 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); 2659 2660 ixgbe_set_i2c_data(hw, &i2cctl, 1); 2661 2662 for (i = 0; i < 9; i++) { 2663 ixgbe_raise_i2c_clk(hw, &i2cctl); 2664 2665 /* Min high period of clock is 4us */ 2666 usec_delay(IXGBE_I2C_T_HIGH); 2667 2668 ixgbe_lower_i2c_clk(hw, &i2cctl); 2669 2670 /* Min low period of clock is 4.7us*/ 2671 usec_delay(IXGBE_I2C_T_LOW); 2672 } 2673 2674 ixgbe_i2c_start(hw); 2675 2676 /* Put the i2c bus back to default state */ 2677 ixgbe_i2c_stop(hw); 2678} 2679 2680/** 2681 * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. 2682 * @hw: pointer to hardware structure 2683 * 2684 * Checks if the LASI temp alarm status was triggered due to overtemp 2685 **/ 2686s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) 2687{ 2688 s32 status = IXGBE_SUCCESS; 2689 u16 phy_data = 0; 2690 2691 DEBUGFUNC("ixgbe_tn_check_overtemp"); 2692 2693 if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) 2694 goto out; 2695 2696 /* Check that the LASI temp alarm status was triggered */ 2697 hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, 2698 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data); 2699 2700 if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) 2701 goto out; 2702 2703 status = IXGBE_ERR_OVERTEMP; 2704 ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature"); 2705out: 2706 return status; 2707} 2708 2709/** 2710 * ixgbe_set_copper_phy_power - Control power for copper phy 2711 * @hw: pointer to hardware structure 2712 * @on: TRUE for on, FALSE for off 2713 */ 2714s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) 2715{ 2716 u32 status; 2717 u16 reg; 2718 2719 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, 2720 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2721 ®); 2722 if (status) 2723 return status; 2724 2725 if (on) { 2726 reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; 2727 } else { 2728 if (ixgbe_check_reset_blocked(hw)) 2729 return 0; 2730 reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; 2731 } 2732 2733 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, 2734 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2735 reg); 2736 return status; 2737} 2738