advansys.c revision 315813
1/*- 2 * Generic driver for the Advanced Systems Inc. SCSI controllers 3 * Product specific probe and attach routines can be found in: 4 * 5 * i386/isa/adv_isa.c ABP5140, ABP542, ABP5150, ABP842, ABP852 6 * i386/eisa/adv_eisa.c ABP742, ABP752 7 * pci/adv_pci.c ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U, 8 * ABP940UA, ABP950, ABP960, ABP960U, ABP960UA, 9 * ABP970, ABP970U 10 * 11 * Copyright (c) 1996-2000 Justin Gibbs. 12 * All rights reserved. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions, and the following disclaimer, 19 * without modification, immediately at the beginning of the file. 20 * 2. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35/*- 36 * Ported from: 37 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 38 * 39 * Copyright (c) 1995-1997 Advanced System Products, Inc. 40 * All Rights Reserved. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that redistributions of source 44 * code retain the above copyright notice and this comment without 45 * modification. 46 */ 47 48#include <sys/cdefs.h> 49__FBSDID("$FreeBSD: stable/10/sys/dev/advansys/advansys.c 315813 2017-03-23 06:41:13Z mav $"); 50 51#include <sys/param.h> 52#include <sys/conf.h> 53#include <sys/systm.h> 54#include <sys/malloc.h> 55#include <sys/kernel.h> 56#include <sys/lock.h> 57#include <sys/module.h> 58#include <sys/mutex.h> 59 60#include <machine/bus.h> 61#include <machine/resource.h> 62#include <sys/bus.h> 63#include <sys/rman.h> 64 65#include <cam/cam.h> 66#include <cam/cam_ccb.h> 67#include <cam/cam_sim.h> 68#include <cam/cam_xpt_sim.h> 69#include <cam/cam_debug.h> 70 71#include <cam/scsi/scsi_all.h> 72#include <cam/scsi/scsi_message.h> 73 74#include <vm/vm.h> 75#include <vm/vm_param.h> 76#include <vm/pmap.h> 77 78#include <dev/advansys/advansys.h> 79 80static void adv_action(struct cam_sim *sim, union ccb *ccb); 81static void adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 82 int nsegments, int error); 83static void adv_intr_locked(struct adv_softc *adv); 84static void adv_poll(struct cam_sim *sim); 85static void adv_run_doneq(struct adv_softc *adv); 86static struct adv_ccb_info * 87 adv_alloc_ccb_info(struct adv_softc *adv); 88static void adv_destroy_ccb_info(struct adv_softc *adv, 89 struct adv_ccb_info *cinfo); 90static __inline struct adv_ccb_info * 91 adv_get_ccb_info(struct adv_softc *adv); 92static __inline void adv_free_ccb_info(struct adv_softc *adv, 93 struct adv_ccb_info *cinfo); 94static __inline void adv_set_state(struct adv_softc *adv, adv_state state); 95static __inline void adv_clear_state(struct adv_softc *adv, union ccb* ccb); 96static void adv_clear_state_really(struct adv_softc *adv, union ccb* ccb); 97 98static __inline struct adv_ccb_info * 99adv_get_ccb_info(struct adv_softc *adv) 100{ 101 struct adv_ccb_info *cinfo; 102 103 if (!dumping) 104 mtx_assert(&adv->lock, MA_OWNED); 105 if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 106 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 107 } else { 108 cinfo = adv_alloc_ccb_info(adv); 109 } 110 111 return (cinfo); 112} 113 114static __inline void 115adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 116{ 117 118 if (!dumping) 119 mtx_assert(&adv->lock, MA_OWNED); 120 cinfo->state = ACCB_FREE; 121 SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links); 122} 123 124static __inline void 125adv_set_state(struct adv_softc *adv, adv_state state) 126{ 127 if (adv->state == 0) 128 xpt_freeze_simq(adv->sim, /*count*/1); 129 adv->state |= state; 130} 131 132static __inline void 133adv_clear_state(struct adv_softc *adv, union ccb* ccb) 134{ 135 if (adv->state != 0) 136 adv_clear_state_really(adv, ccb); 137} 138 139static void 140adv_clear_state_really(struct adv_softc *adv, union ccb* ccb) 141{ 142 143 if (!dumping) 144 mtx_assert(&adv->lock, MA_OWNED); 145 if ((adv->state & ADV_BUSDMA_BLOCK_CLEARED) != 0) 146 adv->state &= ~(ADV_BUSDMA_BLOCK_CLEARED|ADV_BUSDMA_BLOCK); 147 if ((adv->state & ADV_RESOURCE_SHORTAGE) != 0) { 148 int openings; 149 150 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q; 151 if (openings >= adv->openings_needed) { 152 adv->state &= ~ADV_RESOURCE_SHORTAGE; 153 adv->openings_needed = 0; 154 } 155 } 156 157 if ((adv->state & ADV_IN_TIMEOUT) != 0) { 158 struct adv_ccb_info *cinfo; 159 160 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 161 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) { 162 struct ccb_hdr *ccb_h; 163 164 /* 165 * We now traverse our list of pending CCBs 166 * and reinstate their timeouts. 167 */ 168 ccb_h = LIST_FIRST(&adv->pending_ccbs); 169 while (ccb_h != NULL) { 170 cinfo = ccb_h->ccb_cinfo_ptr; 171 callout_reset_sbt(&cinfo->timer, 172 SBT_1MS * ccb_h->timeout, 0, 173 adv_timeout, ccb_h, 0); 174 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 175 } 176 adv->state &= ~ADV_IN_TIMEOUT; 177 device_printf(adv->dev, "No longer in timeout\n"); 178 } 179 } 180 if (adv->state == 0) 181 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 182} 183 184void 185adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error) 186{ 187 bus_addr_t* physaddr; 188 189 physaddr = (bus_addr_t*)arg; 190 *physaddr = segs->ds_addr; 191} 192 193static void 194adv_action(struct cam_sim *sim, union ccb *ccb) 195{ 196 struct adv_softc *adv; 197 198 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n")); 199 200 adv = (struct adv_softc *)cam_sim_softc(sim); 201 mtx_assert(&adv->lock, MA_OWNED); 202 203 switch (ccb->ccb_h.func_code) { 204 /* Common cases first */ 205 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 206 { 207 struct ccb_hdr *ccb_h; 208 struct ccb_scsiio *csio; 209 struct adv_ccb_info *cinfo; 210 int error; 211 212 ccb_h = &ccb->ccb_h; 213 csio = &ccb->csio; 214 cinfo = adv_get_ccb_info(adv); 215 if (cinfo == NULL) 216 panic("XXX Handle CCB info error!!!"); 217 218 ccb_h->ccb_cinfo_ptr = cinfo; 219 cinfo->ccb = ccb; 220 221 error = bus_dmamap_load_ccb(adv->buffer_dmat, 222 cinfo->dmamap, 223 ccb, 224 adv_execute_ccb, 225 csio, /*flags*/0); 226 if (error == EINPROGRESS) { 227 /* 228 * So as to maintain ordering, freeze the controller 229 * queue until our mapping is returned. 230 */ 231 adv_set_state(adv, ADV_BUSDMA_BLOCK); 232 } 233 break; 234 } 235 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 236 case XPT_TARGET_IO: /* Execute target I/O request */ 237 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 238 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 239 case XPT_EN_LUN: /* Enable LUN as a target */ 240 case XPT_ABORT: /* Abort the specified CCB */ 241 /* XXX Implement */ 242 ccb->ccb_h.status = CAM_REQ_INVALID; 243 xpt_done(ccb); 244 break; 245#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS) 246#define IS_USER_SETTINGS(c) (c->type == CTS_TYPE_USER_SETTINGS) 247 case XPT_SET_TRAN_SETTINGS: 248 { 249 struct ccb_trans_settings_scsi *scsi; 250 struct ccb_trans_settings_spi *spi; 251 struct ccb_trans_settings *cts; 252 target_bit_vector targ_mask; 253 struct adv_transinfo *tconf; 254 u_int update_type; 255 256 cts = &ccb->cts; 257 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 258 update_type = 0; 259 260 /* 261 * The user must specify which type of settings he wishes 262 * to change. 263 */ 264 if (IS_CURRENT_SETTINGS(cts) && !IS_USER_SETTINGS(cts)) { 265 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 266 update_type |= ADV_TRANS_GOAL; 267 } else if (IS_USER_SETTINGS(cts) && !IS_CURRENT_SETTINGS(cts)) { 268 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 269 update_type |= ADV_TRANS_USER; 270 } else { 271 ccb->ccb_h.status = CAM_REQ_INVALID; 272 break; 273 } 274 275 scsi = &cts->proto_specific.scsi; 276 spi = &cts->xport_specific.spi; 277 if ((update_type & ADV_TRANS_GOAL) != 0) { 278 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 279 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 280 adv->disc_enable |= targ_mask; 281 else 282 adv->disc_enable &= ~targ_mask; 283 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, 284 adv->disc_enable); 285 } 286 287 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 288 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 289 adv->cmd_qng_enabled |= targ_mask; 290 else 291 adv->cmd_qng_enabled &= ~targ_mask; 292 } 293 } 294 295 if ((update_type & ADV_TRANS_USER) != 0) { 296 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 297 if ((spi->flags & CTS_SPI_VALID_DISC) != 0) 298 adv->user_disc_enable |= targ_mask; 299 else 300 adv->user_disc_enable &= ~targ_mask; 301 } 302 303 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 304 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 305 adv->user_cmd_qng_enabled |= targ_mask; 306 else 307 adv->user_cmd_qng_enabled &= ~targ_mask; 308 } 309 } 310 311 /* 312 * If the user specifies either the sync rate, or offset, 313 * but not both, the unspecified parameter defaults to its 314 * current value in transfer negotiations. 315 */ 316 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 317 || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) { 318 /* 319 * If the user provided a sync rate but no offset, 320 * use the current offset. 321 */ 322 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) 323 spi->sync_offset = tconf->offset; 324 325 /* 326 * If the user provided an offset but no sync rate, 327 * use the current sync rate. 328 */ 329 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) 330 spi->sync_period = tconf->period; 331 332 adv_period_offset_to_sdtr(adv, &spi->sync_period, 333 &spi->sync_offset, 334 cts->ccb_h.target_id); 335 336 adv_set_syncrate(adv, /*struct cam_path */NULL, 337 cts->ccb_h.target_id, spi->sync_period, 338 spi->sync_offset, update_type); 339 } 340 341 ccb->ccb_h.status = CAM_REQ_CMP; 342 xpt_done(ccb); 343 break; 344 } 345 case XPT_GET_TRAN_SETTINGS: 346 /* Get default/user set transfer settings for the target */ 347 { 348 struct ccb_trans_settings_scsi *scsi; 349 struct ccb_trans_settings_spi *spi; 350 struct ccb_trans_settings *cts; 351 struct adv_transinfo *tconf; 352 target_bit_vector target_mask; 353 354 cts = &ccb->cts; 355 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 356 357 scsi = &cts->proto_specific.scsi; 358 spi = &cts->xport_specific.spi; 359 360 cts->protocol = PROTO_SCSI; 361 cts->protocol_version = SCSI_REV_2; 362 cts->transport = XPORT_SPI; 363 cts->transport_version = 2; 364 365 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 366 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 367 368 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 369 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 370 if ((adv->disc_enable & target_mask) != 0) 371 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 372 if ((adv->cmd_qng_enabled & target_mask) != 0) 373 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 374 } else { 375 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 376 if ((adv->user_disc_enable & target_mask) != 0) 377 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 378 if ((adv->user_cmd_qng_enabled & target_mask) != 0) 379 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 380 } 381 spi->sync_period = tconf->period; 382 spi->sync_offset = tconf->offset; 383 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 384 spi->valid = CTS_SPI_VALID_SYNC_RATE 385 | CTS_SPI_VALID_SYNC_OFFSET 386 | CTS_SPI_VALID_BUS_WIDTH 387 | CTS_SPI_VALID_DISC; 388 scsi->valid = CTS_SCSI_VALID_TQ; 389 ccb->ccb_h.status = CAM_REQ_CMP; 390 xpt_done(ccb); 391 break; 392 } 393 case XPT_CALC_GEOMETRY: 394 { 395 int extended; 396 397 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0; 398 cam_calc_geometry(&ccb->ccg, extended); 399 xpt_done(ccb); 400 break; 401 } 402 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 403 { 404 405 adv_stop_execution(adv); 406 adv_reset_bus(adv, /*initiate_reset*/TRUE); 407 adv_start_execution(adv); 408 409 ccb->ccb_h.status = CAM_REQ_CMP; 410 xpt_done(ccb); 411 break; 412 } 413 case XPT_TERM_IO: /* Terminate the I/O process */ 414 /* XXX Implement */ 415 ccb->ccb_h.status = CAM_REQ_INVALID; 416 xpt_done(ccb); 417 break; 418 case XPT_PATH_INQ: /* Path routing inquiry */ 419 { 420 struct ccb_pathinq *cpi = &ccb->cpi; 421 422 cpi->version_num = 1; /* XXX??? */ 423 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 424 cpi->target_sprt = 0; 425 cpi->hba_misc = 0; 426 cpi->hba_eng_cnt = 0; 427 cpi->max_target = 7; 428 cpi->max_lun = 7; 429 cpi->initiator_id = adv->scsi_id; 430 cpi->bus_id = cam_sim_bus(sim); 431 cpi->base_transfer_speed = 3300; 432 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 433 strlcpy(cpi->hba_vid, "Advansys", HBA_IDLEN); 434 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 435 cpi->unit_number = cam_sim_unit(sim); 436 cpi->ccb_h.status = CAM_REQ_CMP; 437 cpi->transport = XPORT_SPI; 438 cpi->transport_version = 2; 439 cpi->protocol = PROTO_SCSI; 440 cpi->protocol_version = SCSI_REV_2; 441 xpt_done(ccb); 442 break; 443 } 444 default: 445 ccb->ccb_h.status = CAM_REQ_INVALID; 446 xpt_done(ccb); 447 break; 448 } 449} 450 451/* 452 * Currently, the output of bus_dmammap_load suits our needs just 453 * fine, but should it change, we'd need to do something here. 454 */ 455#define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs) 456 457static void 458adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 459 int nsegments, int error) 460{ 461 struct ccb_scsiio *csio; 462 struct ccb_hdr *ccb_h; 463 struct cam_sim *sim; 464 struct adv_softc *adv; 465 struct adv_ccb_info *cinfo; 466 struct adv_scsi_q scsiq; 467 struct adv_sg_head sghead; 468 469 csio = (struct ccb_scsiio *)arg; 470 ccb_h = &csio->ccb_h; 471 sim = xpt_path_sim(ccb_h->path); 472 adv = (struct adv_softc *)cam_sim_softc(sim); 473 cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr; 474 if (!dumping) 475 mtx_assert(&adv->lock, MA_OWNED); 476 477 /* 478 * Setup our done routine to release the simq on 479 * the next ccb that completes. 480 */ 481 if ((adv->state & ADV_BUSDMA_BLOCK) != 0) 482 adv->state |= ADV_BUSDMA_BLOCK_CLEARED; 483 484 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) { 485 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) { 486 /* XXX Need phystovirt!!!! */ 487 /* How about pmap_kenter??? */ 488 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 489 } else { 490 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 491 } 492 } else { 493 scsiq.cdbptr = csio->cdb_io.cdb_bytes; 494 } 495 /* 496 * Build up the request 497 */ 498 scsiq.q1.status = 0; 499 scsiq.q1.q_no = 0; 500 scsiq.q1.cntl = 0; 501 scsiq.q1.sg_queue_cnt = 0; 502 scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id); 503 scsiq.q1.target_lun = ccb_h->target_lun; 504 scsiq.q1.sense_len = csio->sense_len; 505 scsiq.q1.extra_bytes = 0; 506 scsiq.q2.ccb_index = cinfo - adv->ccb_infos; 507 scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id, 508 ccb_h->target_lun); 509 scsiq.q2.flag = 0; 510 scsiq.q2.cdb_len = csio->cdb_len; 511 if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0) 512 scsiq.q2.tag_code = csio->tag_action; 513 else 514 scsiq.q2.tag_code = 0; 515 scsiq.q2.vm_id = 0; 516 517 if (nsegments != 0) { 518 bus_dmasync_op_t op; 519 520 scsiq.q1.data_addr = dm_segs->ds_addr; 521 scsiq.q1.data_cnt = dm_segs->ds_len; 522 if (nsegments > 1) { 523 scsiq.q1.cntl |= QC_SG_HEAD; 524 sghead.entry_cnt 525 = sghead.entry_to_copy 526 = nsegments; 527 sghead.res = 0; 528 sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs); 529 scsiq.sg_head = &sghead; 530 } else { 531 scsiq.sg_head = NULL; 532 } 533 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN) 534 op = BUS_DMASYNC_PREREAD; 535 else 536 op = BUS_DMASYNC_PREWRITE; 537 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 538 } else { 539 scsiq.q1.data_addr = 0; 540 scsiq.q1.data_cnt = 0; 541 scsiq.sg_head = NULL; 542 } 543 544 /* 545 * Last time we need to check if this SCB needs to 546 * be aborted. 547 */ 548 if (ccb_h->status != CAM_REQ_INPROG) { 549 if (nsegments != 0) 550 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 551 adv_clear_state(adv, (union ccb *)csio); 552 adv_free_ccb_info(adv, cinfo); 553 xpt_done((union ccb *)csio); 554 return; 555 } 556 557 if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) { 558 /* Temporary resource shortage */ 559 adv_set_state(adv, ADV_RESOURCE_SHORTAGE); 560 if (nsegments != 0) 561 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 562 csio->ccb_h.status = CAM_REQUEUE_REQ; 563 adv_clear_state(adv, (union ccb *)csio); 564 adv_free_ccb_info(adv, cinfo); 565 xpt_done((union ccb *)csio); 566 return; 567 } 568 cinfo->state |= ACCB_ACTIVE; 569 ccb_h->status |= CAM_SIM_QUEUED; 570 LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le); 571 /* Schedule our timeout */ 572 callout_reset_sbt(&cinfo->timer, SBT_1MS * ccb_h->timeout, 0, 573 adv_timeout, csio, 0); 574} 575 576static struct adv_ccb_info * 577adv_alloc_ccb_info(struct adv_softc *adv) 578{ 579 int error; 580 struct adv_ccb_info *cinfo; 581 582 cinfo = &adv->ccb_infos[adv->ccb_infos_allocated]; 583 cinfo->state = ACCB_FREE; 584 callout_init_mtx(&cinfo->timer, &adv->lock, 0); 585 error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0, 586 &cinfo->dmamap); 587 if (error != 0) { 588 device_printf(adv->dev, "Unable to allocate CCB info " 589 "dmamap - error %d\n", error); 590 return (NULL); 591 } 592 adv->ccb_infos_allocated++; 593 return (cinfo); 594} 595 596static void 597adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 598{ 599 600 callout_drain(&cinfo->timer); 601 bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap); 602} 603 604void 605adv_timeout(void *arg) 606{ 607 union ccb *ccb; 608 struct adv_softc *adv; 609 struct adv_ccb_info *cinfo, *cinfo2; 610 611 ccb = (union ccb *)arg; 612 adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc; 613 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 614 mtx_assert(&adv->lock, MA_OWNED); 615 616 xpt_print_path(ccb->ccb_h.path); 617 printf("Timed out\n"); 618 619 /* Have we been taken care of already?? */ 620 if (cinfo == NULL || cinfo->state == ACCB_FREE) { 621 return; 622 } 623 624 adv_stop_execution(adv); 625 626 if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) { 627 struct ccb_hdr *ccb_h; 628 629 /* 630 * In order to simplify the recovery process, we ask the XPT 631 * layer to halt the queue of new transactions and we traverse 632 * the list of pending CCBs and remove their timeouts. This 633 * means that the driver attempts to clear only one error 634 * condition at a time. In general, timeouts that occur 635 * close together are related anyway, so there is no benefit 636 * in attempting to handle errors in parrallel. Timeouts will 637 * be reinstated when the recovery process ends. 638 */ 639 adv_set_state(adv, ADV_IN_TIMEOUT); 640 641 /* This CCB is the CCB representing our recovery actions */ 642 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED; 643 644 ccb_h = LIST_FIRST(&adv->pending_ccbs); 645 while (ccb_h != NULL) { 646 cinfo2 = ccb_h->ccb_cinfo_ptr; 647 callout_stop(&cinfo2->timer); 648 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 649 } 650 651 /* XXX Should send a BDR */ 652 /* Attempt an abort as our first tact */ 653 xpt_print_path(ccb->ccb_h.path); 654 printf("Attempting abort\n"); 655 adv_abort_ccb(adv, ccb->ccb_h.target_id, 656 ccb->ccb_h.target_lun, ccb, 657 CAM_CMD_TIMEOUT, /*queued_only*/FALSE); 658 callout_reset(&cinfo->timer, 2 * hz, adv_timeout, ccb); 659 } else { 660 /* Our attempt to perform an abort failed, go for a reset */ 661 xpt_print_path(ccb->ccb_h.path); 662 printf("Resetting bus\n"); 663 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 664 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 665 adv_reset_bus(adv, /*initiate_reset*/TRUE); 666 } 667 adv_start_execution(adv); 668} 669 670struct adv_softc * 671adv_alloc(device_t dev, struct resource *res, long offset) 672{ 673 struct adv_softc *adv = device_get_softc(dev); 674 675 /* 676 * Allocate a storage area for us 677 */ 678 LIST_INIT(&adv->pending_ccbs); 679 SLIST_INIT(&adv->free_ccb_infos); 680 adv->dev = dev; 681 adv->res = res; 682 adv->reg_off = offset; 683 mtx_init(&adv->lock, "adv", NULL, MTX_DEF); 684 685 return(adv); 686} 687 688void 689adv_free(struct adv_softc *adv) 690{ 691 switch (adv->init_level) { 692 case 6: 693 { 694 struct adv_ccb_info *cinfo; 695 696 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 697 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 698 adv_destroy_ccb_info(adv, cinfo); 699 } 700 701 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap); 702 } 703 case 5: 704 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers, 705 adv->sense_dmamap); 706 case 4: 707 bus_dma_tag_destroy(adv->sense_dmat); 708 case 3: 709 bus_dma_tag_destroy(adv->buffer_dmat); 710 case 2: 711 bus_dma_tag_destroy(adv->parent_dmat); 712 case 1: 713 if (adv->ccb_infos != NULL) 714 free(adv->ccb_infos, M_DEVBUF); 715 case 0: 716 mtx_destroy(&adv->lock); 717 break; 718 } 719} 720 721int 722adv_init(struct adv_softc *adv) 723{ 724 struct adv_eeprom_config eeprom_config; 725 int checksum, i; 726 int max_sync; 727 u_int16_t config_lsw; 728 u_int16_t config_msw; 729 730 mtx_lock(&adv->lock); 731 adv_lib_init(adv); 732 733 /* 734 * Stop script execution. 735 */ 736 adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE); 737 adv_stop_execution(adv); 738 if (adv_stop_chip(adv) == 0 || adv_is_chip_halted(adv) == 0) { 739 mtx_unlock(&adv->lock); 740 device_printf(adv->dev, 741 "Unable to halt adapter. Initialization failed\n"); 742 return (1); 743 } 744 ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR); 745 if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) { 746 mtx_unlock(&adv->lock); 747 device_printf(adv->dev, 748 "Unable to set program counter. Initialization failed\n"); 749 return (1); 750 } 751 752 config_msw = ADV_INW(adv, ADV_CONFIG_MSW); 753 config_lsw = ADV_INW(adv, ADV_CONFIG_LSW); 754 755 if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) { 756 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 757 /* 758 * XXX The Linux code flags this as an error, 759 * but what should we report to the user??? 760 * It seems that clearing the config register 761 * makes this error recoverable. 762 */ 763 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 764 } 765 766 /* Suck in the configuration from the EEProm */ 767 checksum = adv_get_eeprom_config(adv, &eeprom_config); 768 769 if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) { 770 /* 771 * XXX The Linux code sets a warning level for this 772 * condition, yet nothing of meaning is printed to 773 * the user. What does this mean??? 774 */ 775 if (adv->chip_version == 3) { 776 if (eeprom_config.cfg_lsw != config_lsw) 777 eeprom_config.cfg_lsw = config_lsw; 778 if (eeprom_config.cfg_msw != config_msw) { 779 eeprom_config.cfg_msw = config_msw; 780 } 781 } 782 } 783 if (checksum == eeprom_config.chksum) { 784 785 /* Range/Sanity checking */ 786 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) { 787 eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG; 788 } 789 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) { 790 eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG; 791 } 792 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) { 793 eeprom_config.max_tag_qng = eeprom_config.max_total_qng; 794 } 795 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) { 796 eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC; 797 } 798 adv->max_openings = eeprom_config.max_total_qng; 799 adv->user_disc_enable = eeprom_config.disc_enable; 800 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng; 801 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config); 802 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID; 803 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id); 804 adv->control = eeprom_config.cntl; 805 for (i = 0; i <= ADV_MAX_TID; i++) { 806 u_int8_t sync_data; 807 808 if ((eeprom_config.init_sdtr & (0x1 << i)) == 0) 809 sync_data = 0; 810 else 811 sync_data = eeprom_config.sdtr_data[i]; 812 adv_sdtr_to_period_offset(adv, 813 sync_data, 814 &adv->tinfo[i].user.period, 815 &adv->tinfo[i].user.offset, 816 i); 817 } 818 config_lsw = eeprom_config.cfg_lsw; 819 eeprom_config.cfg_msw = config_msw; 820 } else { 821 u_int8_t sync_data; 822 823 device_printf(adv->dev, "Warning EEPROM Checksum mismatch. " 824 "Using default device parameters\n"); 825 826 /* Set reasonable defaults since we can't read the EEPROM */ 827 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1; 828 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG; 829 adv->disc_enable = TARGET_BIT_VECTOR_SET; 830 adv->user_disc_enable = TARGET_BIT_VECTOR_SET; 831 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 832 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 833 adv->scsi_id = 7; 834 adv->control = 0xFFFF; 835 836 if (adv->chip_version == ADV_CHIP_VER_PCI_ULTRA_3050) 837 /* Default to no Ultra to support the 3030 */ 838 adv->control &= ~ADV_CNTL_SDTR_ENABLE_ULTRA; 839 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4); 840 for (i = 0; i <= ADV_MAX_TID; i++) { 841 adv_sdtr_to_period_offset(adv, sync_data, 842 &adv->tinfo[i].user.period, 843 &adv->tinfo[i].user.offset, 844 i); 845 } 846 config_lsw |= ADV_CFG_LSW_SCSI_PARITY_ON; 847 } 848 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 849 config_lsw |= ADV_CFG_LSW_HOST_INT_ON; 850 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA) 851 && (adv->control & ADV_CNTL_SDTR_ENABLE_ULTRA) == 0) 852 /* 25ns or 10MHz */ 853 max_sync = 25; 854 else 855 /* Unlimited */ 856 max_sync = 0; 857 for (i = 0; i <= ADV_MAX_TID; i++) { 858 if (adv->tinfo[i].user.period < max_sync) 859 adv->tinfo[i].user.period = max_sync; 860 } 861 862 if (adv_test_external_lram(adv) == 0) { 863 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) { 864 eeprom_config.max_total_qng = 865 ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; 866 eeprom_config.max_tag_qng = 867 ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG; 868 } else { 869 eeprom_config.cfg_msw |= 0x0800; 870 config_msw |= 0x0800; 871 eeprom_config.max_total_qng = 872 ADV_MAX_PCI_INRAM_TOTAL_QNG; 873 eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG; 874 } 875 adv->max_openings = eeprom_config.max_total_qng; 876 } 877 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 878 ADV_OUTW(adv, ADV_CONFIG_LSW, config_lsw); 879#if 0 880 /* 881 * Don't write the eeprom data back for now. 882 * I'd rather not mess up the user's card. We also don't 883 * fully sanitize the eeprom settings above for the write-back 884 * to be 100% correct. 885 */ 886 if (adv_set_eeprom_config(adv, &eeprom_config) != 0) 887 device_printf(adv->dev, 888 "WARNING! Failure writing to EEPROM.\n"); 889#endif 890 891 adv_set_chip_scsiid(adv, adv->scsi_id); 892 if (adv_init_lram_and_mcode(adv)) { 893 mtx_unlock(&adv->lock); 894 return (1); 895 } 896 897 adv->disc_enable = adv->user_disc_enable; 898 899 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); 900 for (i = 0; i <= ADV_MAX_TID; i++) { 901 /* 902 * Start off in async mode. 903 */ 904 adv_set_syncrate(adv, /*struct cam_path */NULL, 905 i, /*period*/0, /*offset*/0, 906 ADV_TRANS_CUR); 907 /* 908 * Enable the use of tagged commands on all targets. 909 * This allows the kernel driver to make up it's own mind 910 * as it sees fit to tag queue instead of having the 911 * firmware try and second guess the tag_code settins. 912 */ 913 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i, 914 adv->max_openings); 915 } 916 adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 917 adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 918 device_printf(adv->dev, 919 "AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n", 920 (adv->type & ADV_ULTRA) && (max_sync == 0) 921 ? "Ultra SCSI" : "SCSI", 922 adv->scsi_id, adv->max_openings); 923 mtx_unlock(&adv->lock); 924 return (0); 925} 926 927void 928adv_intr(void *arg) 929{ 930 struct adv_softc *adv; 931 932 adv = arg; 933 mtx_lock(&adv->lock); 934 adv_intr_locked(adv); 935 mtx_unlock(&adv->lock); 936} 937 938void 939adv_intr_locked(struct adv_softc *adv) 940{ 941 u_int16_t chipstat; 942 u_int16_t saved_ram_addr; 943 u_int8_t ctrl_reg; 944 u_int8_t saved_ctrl_reg; 945 u_int8_t host_flag; 946 947 if (!dumping) 948 mtx_assert(&adv->lock, MA_OWNED); 949 chipstat = ADV_INW(adv, ADV_CHIP_STATUS); 950 951 /* Is it for us? */ 952 if ((chipstat & (ADV_CSW_INT_PENDING|ADV_CSW_SCSI_RESET_LATCH)) == 0) 953 return; 954 955 ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL); 956 saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET | 957 ADV_CC_SINGLE_STEP | ADV_CC_DIAG | 958 ADV_CC_TEST)); 959 960 if ((chipstat & (ADV_CSW_SCSI_RESET_LATCH|ADV_CSW_SCSI_RESET_ACTIVE))) { 961 device_printf(adv->dev, "Detected Bus Reset\n"); 962 adv_reset_bus(adv, /*initiate_reset*/FALSE); 963 return; 964 } 965 966 if ((chipstat & ADV_CSW_INT_PENDING) != 0) { 967 968 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR); 969 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B); 970 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, 971 host_flag | ADV_HOST_FLAG_IN_ISR); 972 973 adv_ack_interrupt(adv); 974 975 if ((chipstat & ADV_CSW_HALTED) != 0 976 && (ctrl_reg & ADV_CC_SINGLE_STEP) != 0) { 977 adv_isr_chip_halted(adv); 978 saved_ctrl_reg &= ~ADV_CC_HALT; 979 } else { 980 adv_run_doneq(adv); 981 } 982 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr); 983#ifdef DIAGNOSTIC 984 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr) 985 panic("adv_intr: Unable to set LRAM addr"); 986#endif 987 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag); 988 } 989 990 ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg); 991} 992 993static void 994adv_run_doneq(struct adv_softc *adv) 995{ 996 struct adv_q_done_info scsiq; 997 u_int doneq_head; 998 u_int done_qno; 999 1000 doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF; 1001 done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head) 1002 + ADV_SCSIQ_B_FWD); 1003 while (done_qno != ADV_QLINK_END) { 1004 union ccb* ccb; 1005 struct adv_ccb_info *cinfo; 1006 u_int done_qaddr; 1007 u_int sg_queue_cnt; 1008 int aborted; 1009 1010 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1011 1012 /* Pull status from this request */ 1013 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq, 1014 adv->max_dma_count); 1015 1016 /* Mark it as free */ 1017 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS, 1018 scsiq.q_status & ~(QS_READY|QS_ABORTED)); 1019 1020 /* Process request based on retrieved info */ 1021 if ((scsiq.cntl & QC_SG_HEAD) != 0) { 1022 u_int i; 1023 1024 /* 1025 * S/G based request. Free all of the queue 1026 * structures that contained S/G information. 1027 */ 1028 for (i = 0; i < sg_queue_cnt; i++) { 1029 done_qno = adv_read_lram_8(adv, done_qaddr 1030 + ADV_SCSIQ_B_FWD); 1031 1032#ifdef DIAGNOSTIC 1033 if (done_qno == ADV_QLINK_END) { 1034 panic("adv_qdone: Corrupted SG " 1035 "list encountered"); 1036 } 1037#endif 1038 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1039 1040 /* Mark SG queue as free */ 1041 adv_write_lram_8(adv, done_qaddr 1042 + ADV_SCSIQ_B_STATUS, QS_FREE); 1043 } 1044 } else 1045 sg_queue_cnt = 0; 1046#ifdef DIAGNOSTIC 1047 if (adv->cur_active < (sg_queue_cnt + 1)) 1048 panic("adv_qdone: Attempting to free more " 1049 "queues than are active"); 1050#endif 1051 adv->cur_active -= sg_queue_cnt + 1; 1052 1053 aborted = (scsiq.q_status & QS_ABORTED) != 0; 1054 1055 if ((scsiq.q_status != QS_DONE) 1056 && (scsiq.q_status & QS_ABORTED) == 0) 1057 panic("adv_qdone: completed scsiq with unknown status"); 1058 1059 scsiq.remain_bytes += scsiq.extra_bytes; 1060 1061 if ((scsiq.d3.done_stat == QD_WITH_ERROR) && 1062 (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) { 1063 if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) { 1064 scsiq.d3.done_stat = QD_NO_ERROR; 1065 scsiq.d3.host_stat = QHSTA_NO_ERROR; 1066 } 1067 } 1068 1069 cinfo = &adv->ccb_infos[scsiq.d2.ccb_index]; 1070 ccb = cinfo->ccb; 1071 ccb->csio.resid = scsiq.remain_bytes; 1072 adv_done(adv, ccb, 1073 scsiq.d3.done_stat, scsiq.d3.host_stat, 1074 scsiq.d3.scsi_stat, scsiq.q_no); 1075 1076 doneq_head = done_qno; 1077 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD); 1078 } 1079 adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head); 1080} 1081 1082 1083void 1084adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat, 1085 u_int host_stat, u_int scsi_status, u_int q_no) 1086{ 1087 struct adv_ccb_info *cinfo; 1088 1089 if (!dumping) 1090 mtx_assert(&adv->lock, MA_OWNED); 1091 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 1092 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 1093 callout_stop(&cinfo->timer); 1094 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1095 bus_dmasync_op_t op; 1096 1097 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1098 op = BUS_DMASYNC_POSTREAD; 1099 else 1100 op = BUS_DMASYNC_POSTWRITE; 1101 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 1102 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 1103 } 1104 1105 switch (done_stat) { 1106 case QD_NO_ERROR: 1107 if (host_stat == QHSTA_NO_ERROR) { 1108 ccb->ccb_h.status = CAM_REQ_CMP; 1109 break; 1110 } 1111 xpt_print_path(ccb->ccb_h.path); 1112 printf("adv_done - queue done without error, " 1113 "but host status non-zero(%x)\n", host_stat); 1114 /*FALLTHROUGH*/ 1115 case QD_WITH_ERROR: 1116 switch (host_stat) { 1117 case QHSTA_M_TARGET_STATUS_BUSY: 1118 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY: 1119 /* 1120 * Assume that if we were a tagged transaction 1121 * the target reported queue full. Otherwise, 1122 * report busy. The firmware really should just 1123 * pass the original status back up to us even 1124 * if it thinks the target was in error for 1125 * returning this status as no other transactions 1126 * from this initiator are in effect, but this 1127 * ignores multi-initiator setups and there is 1128 * evidence that the firmware gets its per-device 1129 * transaction counts screwed up occassionally. 1130 */ 1131 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1132 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 1133 && host_stat != QHSTA_M_TARGET_STATUS_BUSY) 1134 scsi_status = SCSI_STATUS_QUEUE_FULL; 1135 else 1136 scsi_status = SCSI_STATUS_BUSY; 1137 adv_abort_ccb(adv, ccb->ccb_h.target_id, 1138 ccb->ccb_h.target_lun, 1139 /*ccb*/NULL, CAM_REQUEUE_REQ, 1140 /*queued_only*/TRUE); 1141 /*FALLTHROUGH*/ 1142 case QHSTA_M_NO_AUTO_REQ_SENSE: 1143 case QHSTA_NO_ERROR: 1144 ccb->csio.scsi_status = scsi_status; 1145 switch (scsi_status) { 1146 case SCSI_STATUS_CHECK_COND: 1147 case SCSI_STATUS_CMD_TERMINATED: 1148 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 1149 /* Structure copy */ 1150 ccb->csio.sense_data = 1151 adv->sense_buffers[q_no - 1]; 1152 /* FALLTHROUGH */ 1153 case SCSI_STATUS_BUSY: 1154 case SCSI_STATUS_RESERV_CONFLICT: 1155 case SCSI_STATUS_QUEUE_FULL: 1156 case SCSI_STATUS_COND_MET: 1157 case SCSI_STATUS_INTERMED: 1158 case SCSI_STATUS_INTERMED_COND_MET: 1159 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1160 break; 1161 case SCSI_STATUS_OK: 1162 ccb->ccb_h.status |= CAM_REQ_CMP; 1163 break; 1164 } 1165 break; 1166 case QHSTA_M_SEL_TIMEOUT: 1167 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1168 break; 1169 case QHSTA_M_DATA_OVER_RUN: 1170 ccb->ccb_h.status = CAM_DATA_RUN_ERR; 1171 break; 1172 case QHSTA_M_UNEXPECTED_BUS_FREE: 1173 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 1174 break; 1175 case QHSTA_M_BAD_BUS_PHASE_SEQ: 1176 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1177 break; 1178 case QHSTA_M_BAD_CMPL_STATUS_IN: 1179 /* No command complete after a status message */ 1180 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1181 break; 1182 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT: 1183 case QHSTA_M_WTM_TIMEOUT: 1184 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET: 1185 /* The SCSI bus hung in a phase */ 1186 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1187 adv_reset_bus(adv, /*initiate_reset*/TRUE); 1188 break; 1189 case QHSTA_M_AUTO_REQ_SENSE_FAIL: 1190 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 1191 break; 1192 case QHSTA_D_QDONE_SG_LIST_CORRUPTED: 1193 case QHSTA_D_ASC_DVC_ERROR_CODE_SET: 1194 case QHSTA_D_HOST_ABORT_FAILED: 1195 case QHSTA_D_EXE_SCSI_Q_FAILED: 1196 case QHSTA_D_ASPI_NO_BUF_POOL: 1197 case QHSTA_M_BAD_TAG_CODE: 1198 case QHSTA_D_LRAM_CMP_ERROR: 1199 case QHSTA_M_MICRO_CODE_ERROR_HALT: 1200 default: 1201 panic("%s: Unhandled Host status error %x", 1202 device_get_nameunit(adv->dev), host_stat); 1203 /* NOTREACHED */ 1204 } 1205 break; 1206 1207 case QD_ABORTED_BY_HOST: 1208 /* Don't clobber any, more explicit, error codes we've set */ 1209 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) 1210 ccb->ccb_h.status = CAM_REQ_ABORTED; 1211 break; 1212 1213 default: 1214 xpt_print_path(ccb->ccb_h.path); 1215 printf("adv_done - queue done with unknown status %x:%x\n", 1216 done_stat, host_stat); 1217 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 1218 break; 1219 } 1220 adv_clear_state(adv, ccb); 1221 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 1222 && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) { 1223 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 1224 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1225 } 1226 adv_free_ccb_info(adv, cinfo); 1227 /* 1228 * Null this out so that we catch driver bugs that cause a 1229 * ccb to be completed twice. 1230 */ 1231 ccb->ccb_h.ccb_cinfo_ptr = NULL; 1232 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1233 xpt_done(ccb); 1234} 1235 1236/* 1237 * Function to poll for command completion when 1238 * interrupts are disabled (crash dumps) 1239 */ 1240static void 1241adv_poll(struct cam_sim *sim) 1242{ 1243 1244 adv_intr_locked(cam_sim_softc(sim)); 1245} 1246 1247/* 1248 * Attach all the sub-devices we can find 1249 */ 1250int 1251adv_attach(adv) 1252 struct adv_softc *adv; 1253{ 1254 struct ccb_setasync csa; 1255 struct cam_devq *devq; 1256 int max_sg; 1257 1258 /* 1259 * Allocate an array of ccb mapping structures. We put the 1260 * index of the ccb_info structure into the queue representing 1261 * a transaction and use it for mapping the queue to the 1262 * upper level SCSI transaction it represents. 1263 */ 1264 adv->ccb_infos = malloc(sizeof(*adv->ccb_infos) * adv->max_openings, 1265 M_DEVBUF, M_NOWAIT); 1266 1267 if (adv->ccb_infos == NULL) 1268 return (ENOMEM); 1269 1270 adv->init_level++; 1271 1272 /* 1273 * Create our DMA tags. These tags define the kinds of device 1274 * accessible memory allocations and memory mappings we will 1275 * need to perform during normal operation. 1276 * 1277 * Unless we need to further restrict the allocation, we rely 1278 * on the restrictions of the parent dmat, hence the common 1279 * use of MAXADDR and MAXSIZE. 1280 * 1281 * The ASC boards use chains of "queues" (the transactional 1282 * resources on the board) to represent long S/G lists. 1283 * The first queue represents the command and holds a 1284 * single address and data pair. The queues that follow 1285 * can each hold ADV_SG_LIST_PER_Q entries. Given the 1286 * total number of queues, we can express the largest 1287 * transaction we can map. We reserve a few queues for 1288 * error recovery. Take those into account as well. 1289 * 1290 * There is a way to take an interrupt to download the 1291 * next batch of S/G entries if there are more than 255 1292 * of them (the counter in the queue structure is a u_int8_t). 1293 * We don't use this feature, so limit the S/G list size 1294 * accordingly. 1295 */ 1296 max_sg = (adv->max_openings - ADV_MIN_FREE_Q - 1) * ADV_SG_LIST_PER_Q; 1297 if (max_sg > 255) 1298 max_sg = 255; 1299 1300 /* DMA tag for mapping buffers into device visible space. */ 1301 if (bus_dma_tag_create( 1302 /* parent */ adv->parent_dmat, 1303 /* alignment */ 1, 1304 /* boundary */ 0, 1305 /* lowaddr */ BUS_SPACE_MAXADDR, 1306 /* highaddr */ BUS_SPACE_MAXADDR, 1307 /* filter */ NULL, 1308 /* filterarg */ NULL, 1309 /* maxsize */ ADV_MAXPHYS, 1310 /* nsegments */ max_sg, 1311 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 1312 /* flags */ BUS_DMA_ALLOCNOW, 1313 /* lockfunc */ busdma_lock_mutex, 1314 /* lockarg */ &adv->lock, 1315 &adv->buffer_dmat) != 0) { 1316 return (ENXIO); 1317 } 1318 adv->init_level++; 1319 1320 /* DMA tag for our sense buffers */ 1321 if (bus_dma_tag_create( 1322 /* parent */ adv->parent_dmat, 1323 /* alignment */ 1, 1324 /* boundary */ 0, 1325 /* lowaddr */ BUS_SPACE_MAXADDR, 1326 /* highaddr */ BUS_SPACE_MAXADDR, 1327 /* filter */ NULL, 1328 /* filterarg */ NULL, 1329 /* maxsize */ sizeof(struct scsi_sense_data) * 1330 adv->max_openings, 1331 /* nsegments */ 1, 1332 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 1333 /* flags */ 0, 1334 /* lockfunc */ busdma_lock_mutex, 1335 /* lockarg */ &adv->lock, 1336 &adv->sense_dmat) != 0) { 1337 return (ENXIO); 1338 } 1339 1340 adv->init_level++; 1341 1342 /* Allocation for our sense buffers */ 1343 if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers, 1344 BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) { 1345 return (ENOMEM); 1346 } 1347 1348 adv->init_level++; 1349 1350 /* And permanently map them */ 1351 bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap, 1352 adv->sense_buffers, 1353 sizeof(struct scsi_sense_data)*adv->max_openings, 1354 adv_map, &adv->sense_physbase, /*flags*/0); 1355 1356 adv->init_level++; 1357 1358 /* 1359 * Fire up the chip 1360 */ 1361 if (adv_start_chip(adv) != 1) { 1362 device_printf(adv->dev, 1363 "Unable to start on board processor. Aborting.\n"); 1364 return (ENXIO); 1365 } 1366 1367 /* 1368 * Create the device queue for our SIM. 1369 */ 1370 devq = cam_simq_alloc(adv->max_openings); 1371 if (devq == NULL) 1372 return (ENOMEM); 1373 1374 /* 1375 * Construct our SIM entry. 1376 */ 1377 adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv, 1378 device_get_unit(adv->dev), &adv->lock, 1, adv->max_openings, devq); 1379 if (adv->sim == NULL) 1380 return (ENOMEM); 1381 1382 /* 1383 * Register the bus. 1384 * 1385 * XXX Twin Channel EISA Cards??? 1386 */ 1387 mtx_lock(&adv->lock); 1388 if (xpt_bus_register(adv->sim, adv->dev, 0) != CAM_SUCCESS) { 1389 cam_sim_free(adv->sim, /*free devq*/TRUE); 1390 mtx_unlock(&adv->lock); 1391 return (ENXIO); 1392 } 1393 1394 if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim), 1395 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) 1396 != CAM_REQ_CMP) { 1397 xpt_bus_deregister(cam_sim_path(adv->sim)); 1398 cam_sim_free(adv->sim, /*free devq*/TRUE); 1399 mtx_unlock(&adv->lock); 1400 return (ENXIO); 1401 } 1402 1403 xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5); 1404 csa.ccb_h.func_code = XPT_SASYNC_CB; 1405 csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE; 1406 csa.callback = advasync; 1407 csa.callback_arg = adv; 1408 xpt_action((union ccb *)&csa); 1409 mtx_unlock(&adv->lock); 1410 return (0); 1411} 1412MODULE_DEPEND(adv, cam, 1, 1, 1); 1413