actypes.h revision 281687
1/****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#ifndef __ACTYPES_H__ 45#define __ACTYPES_H__ 46 47/* acpisrc:StructDefs -- for acpisrc conversion */ 48 49/* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54#ifndef ACPI_MACHINE_WIDTH 55#error ACPI_MACHINE_WIDTH not defined 56#endif 57 58/* 59 * Data type ranges 60 * Note: These macros are designed to be compiler independent as well as 61 * working around problems that some 32-bit compilers have with 64-bit 62 * constants. 63 */ 64#define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 65#define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 66#define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 67#define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 68#define ACPI_ASCII_MAX 0x7F 69 70 71/* 72 * Architecture-specific ACPICA Subsystem Data Types 73 * 74 * The goal of these types is to provide source code portability across 75 * 16-bit, 32-bit, and 64-bit targets. 76 * 77 * 1) The following types are of fixed size for all targets (16/32/64): 78 * 79 * BOOLEAN Logical boolean 80 * 81 * UINT8 8-bit (1 byte) unsigned value 82 * UINT16 16-bit (2 byte) unsigned value 83 * UINT32 32-bit (4 byte) unsigned value 84 * UINT64 64-bit (8 byte) unsigned value 85 * 86 * INT16 16-bit (2 byte) signed value 87 * INT32 32-bit (4 byte) signed value 88 * INT64 64-bit (8 byte) signed value 89 * 90 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 91 * compiler-dependent header(s) and were introduced because there is no common 92 * 64-bit integer type across the various compilation models, as shown in 93 * the table below. 94 * 95 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 96 * char 8 8 8 8 8 8 97 * short 16 16 16 16 16 16 98 * _int32 32 99 * int 32 64 32 32 16 16 100 * long 64 64 32 32 32 32 101 * long long 64 64 102 * pointer 64 64 64 32 32 32 103 * 104 * Note: ILP64 and LP32 are currently not supported. 105 * 106 * 107 * 2) These types represent the native word size of the target mode of the 108 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 109 * usually used for memory allocation, efficient loop counters, and array 110 * indexes. The types are similar to the size_t type in the C library and are 111 * required because there is no C type that consistently represents the native 112 * data width. ACPI_SIZE is needed because there is no guarantee that a 113 * kernel-level C library is present. 114 * 115 * ACPI_SIZE 16/32/64-bit unsigned value 116 * ACPI_NATIVE_INT 16/32/64-bit signed value 117 */ 118 119/******************************************************************************* 120 * 121 * Common types for all compilers, all targets 122 * 123 ******************************************************************************/ 124 125#ifndef ACPI_USE_SYSTEM_INTTYPES 126 127typedef unsigned char BOOLEAN; 128typedef unsigned char UINT8; 129typedef unsigned short UINT16; 130typedef short INT16; 131typedef COMPILER_DEPENDENT_UINT64 UINT64; 132typedef COMPILER_DEPENDENT_INT64 INT64; 133 134#endif /* ACPI_USE_SYSTEM_INTTYPES */ 135 136/* 137 * Value returned by AcpiOsGetThreadId. There is no standard "thread_id" 138 * across operating systems or even the various UNIX systems. Since ACPICA 139 * only needs the thread ID as a unique thread identifier, we use a UINT64 140 * as the only common data type - it will accommodate any type of pointer or 141 * any type of integer. It is up to the host-dependent OSL to cast the 142 * native thread ID type to a UINT64 (in AcpiOsGetThreadId). 143 */ 144#define ACPI_THREAD_ID UINT64 145 146 147/******************************************************************************* 148 * 149 * Types specific to 64-bit targets 150 * 151 ******************************************************************************/ 152 153#if ACPI_MACHINE_WIDTH == 64 154 155#ifndef ACPI_USE_SYSTEM_INTTYPES 156 157typedef unsigned int UINT32; 158typedef int INT32; 159 160#endif /* ACPI_USE_SYSTEM_INTTYPES */ 161 162 163typedef INT64 ACPI_NATIVE_INT; 164typedef UINT64 ACPI_SIZE; 165typedef UINT64 ACPI_IO_ADDRESS; 166typedef UINT64 ACPI_PHYSICAL_ADDRESS; 167 168#define ACPI_MAX_PTR ACPI_UINT64_MAX 169#define ACPI_SIZE_MAX ACPI_UINT64_MAX 170#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 171 172/* 173 * In the case of the Itanium Processor Family (IPF), the hardware does not 174 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 175 * to indicate that special precautions must be taken to avoid alignment faults. 176 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 177 * 178 * Note: EM64T and other X86-64 processors support misaligned transfers, 179 * so there is no need to define this flag. 180 */ 181#if defined (__IA64__) || defined (__ia64__) 182#define ACPI_MISALIGNMENT_NOT_SUPPORTED 183#endif 184 185 186/******************************************************************************* 187 * 188 * Types specific to 32-bit targets 189 * 190 ******************************************************************************/ 191 192#elif ACPI_MACHINE_WIDTH == 32 193 194#ifndef ACPI_USE_SYSTEM_INTTYPES 195 196typedef unsigned int UINT32; 197typedef int INT32; 198 199#endif /* ACPI_USE_SYSTEM_INTTYPES */ 200 201 202typedef INT32 ACPI_NATIVE_INT; 203typedef UINT32 ACPI_SIZE; 204 205#ifdef ACPI_32BIT_PHYSICAL_ADDRESS 206 207/* 208 * OSPMs can define this to shrink the size of the structures for 32-bit 209 * none PAE environment. ASL compiler may always define this to generate 210 * 32-bit OSPM compliant tables. 211 */ 212typedef UINT32 ACPI_IO_ADDRESS; 213typedef UINT32 ACPI_PHYSICAL_ADDRESS; 214 215#else /* ACPI_32BIT_PHYSICAL_ADDRESS */ 216 217/* 218 * It is reported that, after some calculations, the physical addresses can 219 * wrap over the 32-bit boundary on 32-bit PAE environment. 220 * https://bugzilla.kernel.org/show_bug.cgi?id=87971 221 */ 222typedef UINT64 ACPI_IO_ADDRESS; 223typedef UINT64 ACPI_PHYSICAL_ADDRESS; 224 225#endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ 226 227#define ACPI_MAX_PTR ACPI_UINT32_MAX 228#define ACPI_SIZE_MAX ACPI_UINT32_MAX 229 230#else 231 232/* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 233 234#error unknown ACPI_MACHINE_WIDTH 235#endif 236 237 238/******************************************************************************* 239 * 240 * OS-dependent types 241 * 242 * If the defaults below are not appropriate for the host system, they can 243 * be defined in the OS-specific header, and this will take precedence. 244 * 245 ******************************************************************************/ 246 247/* Flags for AcpiOsAcquireLock/AcpiOsReleaseLock */ 248 249#ifndef ACPI_CPU_FLAGS 250#define ACPI_CPU_FLAGS ACPI_SIZE 251#endif 252 253/* Object returned from AcpiOsCreateCache */ 254 255#ifndef ACPI_CACHE_T 256#ifdef ACPI_USE_LOCAL_CACHE 257#define ACPI_CACHE_T ACPI_MEMORY_LIST 258#else 259#define ACPI_CACHE_T void * 260#endif 261#endif 262 263/* 264 * Synchronization objects - Mutexes, Semaphores, and SpinLocks 265 */ 266#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 267/* 268 * These macros are used if the host OS does not support a mutex object. 269 * Map the OSL Mutex interfaces to binary semaphores. 270 */ 271#define ACPI_MUTEX ACPI_SEMAPHORE 272#define AcpiOsCreateMutex(OutHandle) AcpiOsCreateSemaphore (1, 1, OutHandle) 273#define AcpiOsDeleteMutex(Handle) (void) AcpiOsDeleteSemaphore (Handle) 274#define AcpiOsAcquireMutex(Handle,Time) AcpiOsWaitSemaphore (Handle, 1, Time) 275#define AcpiOsReleaseMutex(Handle) (void) AcpiOsSignalSemaphore (Handle, 1) 276#endif 277 278/* Configurable types for synchronization objects */ 279 280#ifndef ACPI_SPINLOCK 281#define ACPI_SPINLOCK void * 282#endif 283 284#ifndef ACPI_SEMAPHORE 285#define ACPI_SEMAPHORE void * 286#endif 287 288#ifndef ACPI_MUTEX 289#define ACPI_MUTEX void * 290#endif 291 292 293/******************************************************************************* 294 * 295 * Compiler-dependent types 296 * 297 * If the defaults below are not appropriate for the host compiler, they can 298 * be defined in the compiler-specific header, and this will take precedence. 299 * 300 ******************************************************************************/ 301 302/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 303 304#ifndef ACPI_UINTPTR_T 305#define ACPI_UINTPTR_T void * 306#endif 307 308/* 309 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 310 * some compilers can catch printf format string problems 311 */ 312#ifndef ACPI_PRINTF_LIKE 313#define ACPI_PRINTF_LIKE(c) 314#endif 315 316/* 317 * Some compilers complain about unused variables. Sometimes we don't want to 318 * use all the variables (for example, _AcpiModuleName). This allows us 319 * to tell the compiler in a per-variable manner that a variable 320 * is unused 321 */ 322#ifndef ACPI_UNUSED_VAR 323#define ACPI_UNUSED_VAR 324#endif 325 326/* 327 * All ACPICA external functions that are available to the rest of the kernel 328 * are tagged with thes macros which can be defined as appropriate for the host. 329 * 330 * Notes: 331 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 332 * interfaces that may need special processing. 333 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 334 */ 335#ifndef ACPI_EXPORT_SYMBOL_INIT 336#define ACPI_EXPORT_SYMBOL_INIT(Symbol) 337#endif 338 339#ifndef ACPI_EXPORT_SYMBOL 340#define ACPI_EXPORT_SYMBOL(Symbol) 341#endif 342 343/* 344 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 345 * utilities only. 346 */ 347#ifndef ACPI_DEBUG_INITIALIZE 348#define ACPI_DEBUG_INITIALIZE() 349#endif 350 351 352/******************************************************************************* 353 * 354 * Configuration 355 * 356 ******************************************************************************/ 357 358#ifdef ACPI_NO_MEM_ALLOCATIONS 359 360#define ACPI_ALLOCATE(a) NULL 361#define ACPI_ALLOCATE_ZEROED(a) NULL 362#define ACPI_FREE(a) 363#define ACPI_MEM_TRACKING(a) 364 365#else /* ACPI_NO_MEM_ALLOCATIONS */ 366 367#ifdef ACPI_DBG_TRACK_ALLOCATIONS 368/* 369 * Memory allocation tracking (used by AcpiExec to detect memory leaks) 370 */ 371#define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ 372#define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 373#define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 374#define ACPI_FREE(a) AcpiUtFreeAndTrack (a, ACPI_MEM_PARAMETERS) 375#define ACPI_MEM_TRACKING(a) a 376 377#else 378/* 379 * Normal memory allocation directly via the OS services layer 380 */ 381#define ACPI_ALLOCATE(a) AcpiOsAllocate ((ACPI_SIZE) (a)) 382#define ACPI_ALLOCATE_ZEROED(a) AcpiOsAllocateZeroed ((ACPI_SIZE) (a)) 383#define ACPI_FREE(a) AcpiOsFree (a) 384#define ACPI_MEM_TRACKING(a) 385 386#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 387 388#endif /* ACPI_NO_MEM_ALLOCATIONS */ 389 390 391/****************************************************************************** 392 * 393 * ACPI Specification constants (Do not change unless the specification changes) 394 * 395 *****************************************************************************/ 396 397/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 398 399#define ACPI_MAX_GPE_BLOCKS 2 400 401/* Default ACPI register widths */ 402 403#define ACPI_GPE_REGISTER_WIDTH 8 404#define ACPI_PM1_REGISTER_WIDTH 16 405#define ACPI_PM2_REGISTER_WIDTH 8 406#define ACPI_PM_TIMER_WIDTH 32 407#define ACPI_RESET_REGISTER_WIDTH 8 408 409/* Names within the namespace are 4 bytes long */ 410 411#define ACPI_NAME_SIZE 4 412#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 413#define ACPI_PATH_SEPARATOR '.' 414 415/* Sizes for ACPI table headers */ 416 417#define ACPI_OEM_ID_SIZE 6 418#define ACPI_OEM_TABLE_ID_SIZE 8 419 420/* ACPI/PNP hardware IDs */ 421 422#define PCI_ROOT_HID_STRING "PNP0A03" 423#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 424 425/* PM Timer ticks per second (HZ) */ 426 427#define ACPI_PM_TIMER_FREQUENCY 3579545 428 429 430/******************************************************************************* 431 * 432 * Independent types 433 * 434 ******************************************************************************/ 435 436/* Logical defines and NULL */ 437 438#ifdef FALSE 439#undef FALSE 440#endif 441#define FALSE (1 == 0) 442 443#ifdef TRUE 444#undef TRUE 445#endif 446#define TRUE (1 == 1) 447 448#ifndef NULL 449#define NULL (void *) 0 450#endif 451 452 453/* 454 * Miscellaneous types 455 */ 456typedef UINT32 ACPI_STATUS; /* All ACPI Exceptions */ 457typedef UINT32 ACPI_NAME; /* 4-byte ACPI name */ 458typedef char * ACPI_STRING; /* Null terminated ASCII string */ 459typedef void * ACPI_HANDLE; /* Actually a ptr to a NS Node */ 460 461 462/* Time constants for timer calculations */ 463 464#define ACPI_MSEC_PER_SEC 1000L 465 466#define ACPI_USEC_PER_MSEC 1000L 467#define ACPI_USEC_PER_SEC 1000000L 468 469#define ACPI_100NSEC_PER_USEC 10L 470#define ACPI_100NSEC_PER_MSEC 10000L 471#define ACPI_100NSEC_PER_SEC 10000000L 472 473#define ACPI_NSEC_PER_USEC 1000L 474#define ACPI_NSEC_PER_MSEC 1000000L 475#define ACPI_NSEC_PER_SEC 1000000000L 476 477 478/* Owner IDs are used to track namespace nodes for selective deletion */ 479 480typedef UINT8 ACPI_OWNER_ID; 481#define ACPI_OWNER_ID_MAX 0xFF 482 483 484#define ACPI_INTEGER_BIT_SIZE 64 485#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 486#define ACPI_MAX64_DECIMAL_DIGITS 20 487#define ACPI_MAX32_DECIMAL_DIGITS 10 488#define ACPI_MAX16_DECIMAL_DIGITS 5 489#define ACPI_MAX8_DECIMAL_DIGITS 3 490 491/* 492 * Constants with special meanings 493 */ 494#define ACPI_ROOT_OBJECT ACPI_ADD_PTR (ACPI_HANDLE, NULL, ACPI_MAX_PTR) 495#define ACPI_WAIT_FOREVER 0xFFFF /* UINT16, as per ACPI spec */ 496#define ACPI_DO_NOT_WAIT 0 497 498/* 499 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. 500 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this 501 * pertains to the ACPI integer type only, not to other integers used in the 502 * implementation of the ACPICA subsystem. 503 * 504 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 505 * code base. It remains here for compatibility with device drivers that use 506 * the type. However, it will be removed in the future. 507 */ 508typedef UINT64 ACPI_INTEGER; 509#define ACPI_INTEGER_MAX ACPI_UINT64_MAX 510 511 512/******************************************************************************* 513 * 514 * Commonly used macros 515 * 516 ******************************************************************************/ 517 518/* Data manipulation */ 519 520#define ACPI_LOBYTE(Integer) ((UINT8) (UINT16)(Integer)) 521#define ACPI_HIBYTE(Integer) ((UINT8) (((UINT16)(Integer)) >> 8)) 522#define ACPI_LOWORD(Integer) ((UINT16) (UINT32)(Integer)) 523#define ACPI_HIWORD(Integer) ((UINT16)(((UINT32)(Integer)) >> 16)) 524#define ACPI_LODWORD(Integer64) ((UINT32) (UINT64)(Integer64)) 525#define ACPI_HIDWORD(Integer64) ((UINT32)(((UINT64)(Integer64)) >> 32)) 526 527#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 528#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 529#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 530#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 531 532/* Size calculation */ 533 534#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 535 536/* Pointer manipulation */ 537 538#define ACPI_CAST_PTR(t, p) ((t *) (ACPI_UINTPTR_T) (p)) 539#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (ACPI_UINTPTR_T) (p)) 540#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) + (ACPI_SIZE)(b))) 541#define ACPI_PTR_DIFF(a, b) (ACPI_SIZE) (ACPI_CAST_PTR (UINT8, (a)) - ACPI_CAST_PTR (UINT8, (b))) 542 543/* Pointer/Integer type conversions */ 544 545#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(ACPI_SIZE) i) 546#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 547#define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL) 548#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 549#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 550 551/* Optimizations for 4-character (32-bit) ACPI_NAME manipulation */ 552 553#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 554#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (UINT32, (a)) == *ACPI_CAST_PTR (UINT32, (b))) 555#define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (UINT32, (dest)) = *ACPI_CAST_PTR (UINT32, (src))) 556#else 557#define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 558#define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) 559#endif 560 561/* Support for the special RSDP signature (8 characters) */ 562 563#define ACPI_VALIDATE_RSDP_SIG(a) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 564#define ACPI_MAKE_RSDP_SIG(dest) (ACPI_MEMCPY (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 565 566 567/******************************************************************************* 568 * 569 * Miscellaneous constants 570 * 571 ******************************************************************************/ 572 573/* 574 * Initialization sequence 575 */ 576#define ACPI_FULL_INITIALIZATION 0x00 577#define ACPI_NO_ADDRESS_SPACE_INIT 0x01 578#define ACPI_NO_HARDWARE_INIT 0x02 579#define ACPI_NO_EVENT_INIT 0x04 580#define ACPI_NO_HANDLER_INIT 0x08 581#define ACPI_NO_ACPI_ENABLE 0x10 582#define ACPI_NO_DEVICE_INIT 0x20 583#define ACPI_NO_OBJECT_INIT 0x40 584 585/* 586 * Initialization state 587 */ 588#define ACPI_SUBSYSTEM_INITIALIZE 0x01 589#define ACPI_INITIALIZED_OK 0x02 590 591/* 592 * Power state values 593 */ 594#define ACPI_STATE_UNKNOWN (UINT8) 0xFF 595 596#define ACPI_STATE_S0 (UINT8) 0 597#define ACPI_STATE_S1 (UINT8) 1 598#define ACPI_STATE_S2 (UINT8) 2 599#define ACPI_STATE_S3 (UINT8) 3 600#define ACPI_STATE_S4 (UINT8) 4 601#define ACPI_STATE_S5 (UINT8) 5 602#define ACPI_S_STATES_MAX ACPI_STATE_S5 603#define ACPI_S_STATE_COUNT 6 604 605#define ACPI_STATE_D0 (UINT8) 0 606#define ACPI_STATE_D1 (UINT8) 1 607#define ACPI_STATE_D2 (UINT8) 2 608#define ACPI_STATE_D3 (UINT8) 3 609#define ACPI_D_STATES_MAX ACPI_STATE_D3 610#define ACPI_D_STATE_COUNT 4 611 612#define ACPI_STATE_C0 (UINT8) 0 613#define ACPI_STATE_C1 (UINT8) 1 614#define ACPI_STATE_C2 (UINT8) 2 615#define ACPI_STATE_C3 (UINT8) 3 616#define ACPI_C_STATES_MAX ACPI_STATE_C3 617#define ACPI_C_STATE_COUNT 4 618 619/* 620 * Sleep type invalid value 621 */ 622#define ACPI_SLEEP_TYPE_MAX 0x7 623#define ACPI_SLEEP_TYPE_INVALID 0xFF 624 625/* 626 * Standard notify values 627 */ 628#define ACPI_NOTIFY_BUS_CHECK (UINT8) 0x00 629#define ACPI_NOTIFY_DEVICE_CHECK (UINT8) 0x01 630#define ACPI_NOTIFY_DEVICE_WAKE (UINT8) 0x02 631#define ACPI_NOTIFY_EJECT_REQUEST (UINT8) 0x03 632#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (UINT8) 0x04 633#define ACPI_NOTIFY_FREQUENCY_MISMATCH (UINT8) 0x05 634#define ACPI_NOTIFY_BUS_MODE_MISMATCH (UINT8) 0x06 635#define ACPI_NOTIFY_POWER_FAULT (UINT8) 0x07 636#define ACPI_NOTIFY_CAPABILITIES_CHECK (UINT8) 0x08 637#define ACPI_NOTIFY_DEVICE_PLD_CHECK (UINT8) 0x09 638#define ACPI_NOTIFY_RESERVED (UINT8) 0x0A 639#define ACPI_NOTIFY_LOCALITY_UPDATE (UINT8) 0x0B 640#define ACPI_NOTIFY_SHUTDOWN_REQUEST (UINT8) 0x0C 641#define ACPI_NOTIFY_AFFINITY_UPDATE (UINT8) 0x0D 642 643#define ACPI_NOTIFY_MAX 0x0D 644 645/* 646 * Types associated with ACPI names and objects. The first group of 647 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 648 * of the ACPI ObjectType() operator (See the ACPI Spec). Therefore, 649 * only add to the first group if the spec changes. 650 * 651 * NOTE: Types must be kept in sync with the global AcpiNsProperties 652 * and AcpiNsTypeNames arrays. 653 */ 654typedef UINT32 ACPI_OBJECT_TYPE; 655 656#define ACPI_TYPE_ANY 0x00 657#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 658#define ACPI_TYPE_STRING 0x02 659#define ACPI_TYPE_BUFFER 0x03 660#define ACPI_TYPE_PACKAGE 0x04 /* ByteConst, multiple DataTerm/Constant/SuperName */ 661#define ACPI_TYPE_FIELD_UNIT 0x05 662#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 663#define ACPI_TYPE_EVENT 0x07 664#define ACPI_TYPE_METHOD 0x08 /* Name, ByteConst, multiple Code */ 665#define ACPI_TYPE_MUTEX 0x09 666#define ACPI_TYPE_REGION 0x0A 667#define ACPI_TYPE_POWER 0x0B /* Name,ByteConst,WordConst,multi Node */ 668#define ACPI_TYPE_PROCESSOR 0x0C /* Name,ByteConst,DWordConst,ByteConst,multi NmO */ 669#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 670#define ACPI_TYPE_BUFFER_FIELD 0x0E 671#define ACPI_TYPE_DDB_HANDLE 0x0F 672#define ACPI_TYPE_DEBUG_OBJECT 0x10 673 674#define ACPI_TYPE_EXTERNAL_MAX 0x10 675 676/* 677 * These are object types that do not map directly to the ACPI 678 * ObjectType() operator. They are used for various internal purposes only. 679 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 680 * internal types must move upwards. (There is code that depends on these 681 * values being contiguous with the external types above.) 682 */ 683#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 684#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 685#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 686#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, RefOf, Index */ 687#define ACPI_TYPE_LOCAL_ALIAS 0x15 688#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 689#define ACPI_TYPE_LOCAL_NOTIFY 0x17 690#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 691#define ACPI_TYPE_LOCAL_RESOURCE 0x19 692#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 693#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple ObjectList Nodes */ 694 695#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 696 697/* 698 * These are special object types that never appear in 699 * a Namespace node, only in an object of ACPI_OPERAND_OBJECT 700 */ 701#define ACPI_TYPE_LOCAL_EXTRA 0x1C 702#define ACPI_TYPE_LOCAL_DATA 0x1D 703 704#define ACPI_TYPE_LOCAL_MAX 0x1D 705 706/* All types above here are invalid */ 707 708#define ACPI_TYPE_INVALID 0x1E 709#define ACPI_TYPE_NOT_FOUND 0xFF 710 711#define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 712 713 714/* 715 * All I/O 716 */ 717#define ACPI_READ 0 718#define ACPI_WRITE 1 719#define ACPI_IO_MASK 1 720 721/* 722 * Event Types: Fixed & General Purpose 723 */ 724typedef UINT32 ACPI_EVENT_TYPE; 725 726/* 727 * Fixed events 728 */ 729#define ACPI_EVENT_PMTIMER 0 730#define ACPI_EVENT_GLOBAL 1 731#define ACPI_EVENT_POWER_BUTTON 2 732#define ACPI_EVENT_SLEEP_BUTTON 3 733#define ACPI_EVENT_RTC 4 734#define ACPI_EVENT_MAX 4 735#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 736 737/* 738 * Event Status - Per event 739 * ------------- 740 * The encoding of ACPI_EVENT_STATUS is illustrated below. 741 * Note that a set bit (1) indicates the property is TRUE 742 * (e.g. if bit 0 is set then the event is enabled). 743 * +-------------+-+-+-+-+-+ 744 * | Bits 31:5 |4|3|2|1|0| 745 * +-------------+-+-+-+-+-+ 746 * | | | | | | 747 * | | | | | +- Enabled? 748 * | | | | +--- Enabled for wake? 749 * | | | +----- Status bit set? 750 * | | +------- Enable bit set? 751 * | +--------- Has a handler? 752 * +--------------- <Reserved> 753 */ 754typedef UINT32 ACPI_EVENT_STATUS; 755 756#define ACPI_EVENT_FLAG_DISABLED (ACPI_EVENT_STATUS) 0x00 757#define ACPI_EVENT_FLAG_ENABLED (ACPI_EVENT_STATUS) 0x01 758#define ACPI_EVENT_FLAG_WAKE_ENABLED (ACPI_EVENT_STATUS) 0x02 759#define ACPI_EVENT_FLAG_STATUS_SET (ACPI_EVENT_STATUS) 0x04 760#define ACPI_EVENT_FLAG_ENABLE_SET (ACPI_EVENT_STATUS) 0x08 761#define ACPI_EVENT_FLAG_HAS_HANDLER (ACPI_EVENT_STATUS) 0x10 762#define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET 763 764/* Actions for AcpiSetGpe, AcpiGpeWakeup, AcpiHwLowSetGpe */ 765 766#define ACPI_GPE_ENABLE 0 767#define ACPI_GPE_DISABLE 1 768#define ACPI_GPE_CONDITIONAL_ENABLE 2 769#define ACPI_GPE_SAVE_MASK 4 770 771#define ACPI_GPE_ENABLE_SAVE (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK) 772#define ACPI_GPE_DISABLE_SAVE (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK) 773 774/* 775 * GPE info flags - Per GPE 776 * +-------+-+-+---+ 777 * | 7:5 |4|3|2:0| 778 * +-------+-+-+---+ 779 * | | | | 780 * | | | +-- Type of dispatch:to method, handler, notify, or none 781 * | | +----- Interrupt type: edge or level triggered 782 * | +------- Is a Wake GPE 783 * +------------ <Reserved> 784 */ 785#define ACPI_GPE_DISPATCH_NONE (UINT8) 0x00 786#define ACPI_GPE_DISPATCH_METHOD (UINT8) 0x01 787#define ACPI_GPE_DISPATCH_HANDLER (UINT8) 0x02 788#define ACPI_GPE_DISPATCH_NOTIFY (UINT8) 0x03 789#define ACPI_GPE_DISPATCH_RAW_HANDLER (UINT8) 0x04 790#define ACPI_GPE_DISPATCH_MASK (UINT8) 0x07 791#define ACPI_GPE_DISPATCH_TYPE(flags) ((UINT8) ((flags) & ACPI_GPE_DISPATCH_MASK)) 792 793#define ACPI_GPE_LEVEL_TRIGGERED (UINT8) 0x08 794#define ACPI_GPE_EDGE_TRIGGERED (UINT8) 0x00 795#define ACPI_GPE_XRUPT_TYPE_MASK (UINT8) 0x08 796 797#define ACPI_GPE_CAN_WAKE (UINT8) 0x10 798 799/* 800 * Flags for GPE and Lock interfaces 801 */ 802#define ACPI_NOT_ISR 0x1 803#define ACPI_ISR 0x0 804 805 806/* Notify types */ 807 808#define ACPI_SYSTEM_NOTIFY 0x1 809#define ACPI_DEVICE_NOTIFY 0x2 810#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 811#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 812#define ACPI_NUM_NOTIFY_TYPES 2 813 814#define ACPI_MAX_SYS_NOTIFY 0x7F 815#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 816 817#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 818#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 819 820 821/* Address Space (Operation Region) Types */ 822 823typedef UINT8 ACPI_ADR_SPACE_TYPE; 824 825#define ACPI_ADR_SPACE_SYSTEM_MEMORY (ACPI_ADR_SPACE_TYPE) 0 826#define ACPI_ADR_SPACE_SYSTEM_IO (ACPI_ADR_SPACE_TYPE) 1 827#define ACPI_ADR_SPACE_PCI_CONFIG (ACPI_ADR_SPACE_TYPE) 2 828#define ACPI_ADR_SPACE_EC (ACPI_ADR_SPACE_TYPE) 3 829#define ACPI_ADR_SPACE_SMBUS (ACPI_ADR_SPACE_TYPE) 4 830#define ACPI_ADR_SPACE_CMOS (ACPI_ADR_SPACE_TYPE) 5 831#define ACPI_ADR_SPACE_PCI_BAR_TARGET (ACPI_ADR_SPACE_TYPE) 6 832#define ACPI_ADR_SPACE_IPMI (ACPI_ADR_SPACE_TYPE) 7 833#define ACPI_ADR_SPACE_GPIO (ACPI_ADR_SPACE_TYPE) 8 834#define ACPI_ADR_SPACE_GSBUS (ACPI_ADR_SPACE_TYPE) 9 835#define ACPI_ADR_SPACE_PLATFORM_COMM (ACPI_ADR_SPACE_TYPE) 10 836 837#define ACPI_NUM_PREDEFINED_REGIONS 11 838 839/* 840 * Special Address Spaces 841 * 842 * Note: A Data Table region is a special type of operation region 843 * that has its own AML opcode. However, internally, the AML 844 * interpreter simply creates an operation region with an an address 845 * space type of ACPI_ADR_SPACE_DATA_TABLE. 846 */ 847#define ACPI_ADR_SPACE_DATA_TABLE (ACPI_ADR_SPACE_TYPE) 0x7E /* Internal to ACPICA only */ 848#define ACPI_ADR_SPACE_FIXED_HARDWARE (ACPI_ADR_SPACE_TYPE) 0x7F 849 850/* Values for _REG connection code */ 851 852#define ACPI_REG_DISCONNECT 0 853#define ACPI_REG_CONNECT 1 854 855/* 856 * BitRegister IDs 857 * 858 * These values are intended to be used by the hardware interfaces 859 * and are mapped to individual bitfields defined within the ACPI 860 * registers. See the AcpiGbl_BitRegisterInfo global table in utglobal.c 861 * for this mapping. 862 */ 863 864/* PM1 Status register */ 865 866#define ACPI_BITREG_TIMER_STATUS 0x00 867#define ACPI_BITREG_BUS_MASTER_STATUS 0x01 868#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 869#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 870#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 871#define ACPI_BITREG_RT_CLOCK_STATUS 0x05 872#define ACPI_BITREG_WAKE_STATUS 0x06 873#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 874 875/* PM1 Enable register */ 876 877#define ACPI_BITREG_TIMER_ENABLE 0x08 878#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 879#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 880#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 881#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 882#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 883 884/* PM1 Control register */ 885 886#define ACPI_BITREG_SCI_ENABLE 0x0E 887#define ACPI_BITREG_BUS_MASTER_RLD 0x0F 888#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 889#define ACPI_BITREG_SLEEP_TYPE 0x11 890#define ACPI_BITREG_SLEEP_ENABLE 0x12 891 892/* PM2 Control register */ 893 894#define ACPI_BITREG_ARB_DISABLE 0x13 895 896#define ACPI_BITREG_MAX 0x13 897#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 898 899 900/* Status register values. A 1 clears a status bit. 0 = no effect */ 901 902#define ACPI_CLEAR_STATUS 1 903 904/* Enable and Control register values */ 905 906#define ACPI_ENABLE_EVENT 1 907#define ACPI_DISABLE_EVENT 0 908 909 910/* Sleep function dispatch */ 911 912typedef ACPI_STATUS (*ACPI_SLEEP_FUNCTION) ( 913 UINT8 SleepState); 914 915typedef struct acpi_sleep_functions 916{ 917 ACPI_SLEEP_FUNCTION LegacyFunction; 918 ACPI_SLEEP_FUNCTION ExtendedFunction; 919 920} ACPI_SLEEP_FUNCTIONS; 921 922 923/* 924 * External ACPI object definition 925 */ 926 927/* 928 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 929 * or an unresolved named reference. 930 */ 931typedef union acpi_object 932{ 933 ACPI_OBJECT_TYPE Type; /* See definition of AcpiNsType for values */ 934 struct 935 { 936 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_INTEGER */ 937 UINT64 Value; /* The actual number */ 938 } Integer; 939 940 struct 941 { 942 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_STRING */ 943 UINT32 Length; /* # of bytes in string, excluding trailing null */ 944 char *Pointer; /* points to the string value */ 945 } String; 946 947 struct 948 { 949 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_BUFFER */ 950 UINT32 Length; /* # of bytes in buffer */ 951 UINT8 *Pointer; /* points to the buffer */ 952 } Buffer; 953 954 struct 955 { 956 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PACKAGE */ 957 UINT32 Count; /* # of elements in package */ 958 union acpi_object *Elements; /* Pointer to an array of ACPI_OBJECTs */ 959 } Package; 960 961 struct 962 { 963 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_LOCAL_REFERENCE */ 964 ACPI_OBJECT_TYPE ActualType; /* Type associated with the Handle */ 965 ACPI_HANDLE Handle; /* object reference */ 966 } Reference; 967 968 struct 969 { 970 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PROCESSOR */ 971 UINT32 ProcId; 972 ACPI_IO_ADDRESS PblkAddress; 973 UINT32 PblkLength; 974 } Processor; 975 976 struct 977 { 978 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_POWER */ 979 UINT32 SystemLevel; 980 UINT32 ResourceOrder; 981 } PowerResource; 982 983} ACPI_OBJECT; 984 985 986/* 987 * List of objects, used as a parameter list for control method evaluation 988 */ 989typedef struct acpi_object_list 990{ 991 UINT32 Count; 992 ACPI_OBJECT *Pointer; 993 994} ACPI_OBJECT_LIST; 995 996 997/* 998 * Miscellaneous common Data Structures used by the interfaces 999 */ 1000#define ACPI_NO_BUFFER 0 1001 1002#ifdef ACPI_NO_MEM_ALLOCATIONS 1003 1004#define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (0) 1005#define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (0) 1006 1007#else /* ACPI_NO_MEM_ALLOCATIONS */ 1008 1009#define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (-1) /* Let ACPICA allocate buffer */ 1010#define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (-2) /* For internal use only (enables tracking) */ 1011 1012#endif /* ACPI_NO_MEM_ALLOCATIONS */ 1013 1014typedef struct acpi_buffer 1015{ 1016 ACPI_SIZE Length; /* Length in bytes of the buffer */ 1017 void *Pointer; /* pointer to buffer */ 1018 1019} ACPI_BUFFER; 1020 1021 1022/* 1023 * NameType for AcpiGetName 1024 */ 1025#define ACPI_FULL_PATHNAME 0 1026#define ACPI_SINGLE_NAME 1 1027#define ACPI_NAME_TYPE_MAX 1 1028 1029 1030/* 1031 * Predefined Namespace items 1032 */ 1033typedef struct acpi_predefined_names 1034{ 1035 char *Name; 1036 UINT8 Type; 1037 char *Val; 1038 1039} ACPI_PREDEFINED_NAMES; 1040 1041 1042/* 1043 * Structure and flags for AcpiGetSystemInfo 1044 */ 1045#define ACPI_SYS_MODE_UNKNOWN 0x0000 1046#define ACPI_SYS_MODE_ACPI 0x0001 1047#define ACPI_SYS_MODE_LEGACY 0x0002 1048#define ACPI_SYS_MODES_MASK 0x0003 1049 1050 1051/* 1052 * System info returned by AcpiGetSystemInfo() 1053 */ 1054typedef struct acpi_system_info 1055{ 1056 UINT32 AcpiCaVersion; 1057 UINT32 Flags; 1058 UINT32 TimerResolution; 1059 UINT32 Reserved1; 1060 UINT32 Reserved2; 1061 UINT32 DebugLevel; 1062 UINT32 DebugLayer; 1063 1064} ACPI_SYSTEM_INFO; 1065 1066 1067/* 1068 * System statistics returned by AcpiGetStatistics() 1069 */ 1070typedef struct acpi_statistics 1071{ 1072 UINT32 SciCount; 1073 UINT32 GpeCount; 1074 UINT32 FixedEventCount[ACPI_NUM_FIXED_EVENTS]; 1075 UINT32 MethodCount; 1076 1077} ACPI_STATISTICS; 1078 1079 1080/* Table Event Types */ 1081 1082#define ACPI_TABLE_EVENT_LOAD 0x0 1083#define ACPI_TABLE_EVENT_UNLOAD 0x1 1084#define ACPI_NUM_TABLE_EVENTS 2 1085 1086 1087/* 1088 * Types specific to the OS service interfaces 1089 */ 1090typedef UINT32 1091(ACPI_SYSTEM_XFACE *ACPI_OSD_HANDLER) ( 1092 void *Context); 1093 1094typedef void 1095(ACPI_SYSTEM_XFACE *ACPI_OSD_EXEC_CALLBACK) ( 1096 void *Context); 1097 1098/* 1099 * Various handlers and callback procedures 1100 */ 1101typedef 1102UINT32 (*ACPI_SCI_HANDLER) ( 1103 void *Context); 1104 1105typedef 1106void (*ACPI_GBL_EVENT_HANDLER) ( 1107 UINT32 EventType, 1108 ACPI_HANDLE Device, 1109 UINT32 EventNumber, 1110 void *Context); 1111 1112#define ACPI_EVENT_TYPE_GPE 0 1113#define ACPI_EVENT_TYPE_FIXED 1 1114 1115typedef 1116UINT32 (*ACPI_EVENT_HANDLER) ( 1117 void *Context); 1118 1119typedef 1120UINT32 (*ACPI_GPE_HANDLER) ( 1121 ACPI_HANDLE GpeDevice, 1122 UINT32 GpeNumber, 1123 void *Context); 1124 1125typedef 1126void (*ACPI_NOTIFY_HANDLER) ( 1127 ACPI_HANDLE Device, 1128 UINT32 Value, 1129 void *Context); 1130 1131typedef 1132void (*ACPI_OBJECT_HANDLER) ( 1133 ACPI_HANDLE Object, 1134 void *Data); 1135 1136typedef 1137ACPI_STATUS (*ACPI_INIT_HANDLER) ( 1138 ACPI_HANDLE Object, 1139 UINT32 Function); 1140 1141#define ACPI_INIT_DEVICE_INI 1 1142 1143typedef 1144ACPI_STATUS (*ACPI_EXCEPTION_HANDLER) ( 1145 ACPI_STATUS AmlStatus, 1146 ACPI_NAME Name, 1147 UINT16 Opcode, 1148 UINT32 AmlOffset, 1149 void *Context); 1150 1151/* Table Event handler (Load, LoadTable, etc.) and types */ 1152 1153typedef 1154ACPI_STATUS (*ACPI_TABLE_HANDLER) ( 1155 UINT32 Event, 1156 void *Table, 1157 void *Context); 1158 1159#define ACPI_TABLE_LOAD 0x0 1160#define ACPI_TABLE_UNLOAD 0x1 1161#define ACPI_NUM_TABLE_EVENTS 2 1162 1163 1164/* Address Spaces (For Operation Regions) */ 1165 1166typedef 1167ACPI_STATUS (*ACPI_ADR_SPACE_HANDLER) ( 1168 UINT32 Function, 1169 ACPI_PHYSICAL_ADDRESS Address, 1170 UINT32 BitWidth, 1171 UINT64 *Value, 1172 void *HandlerContext, 1173 void *RegionContext); 1174 1175#define ACPI_DEFAULT_HANDLER NULL 1176 1177/* Special Context data for GenericSerialBus/GeneralPurposeIo (ACPI 5.0) */ 1178 1179typedef struct acpi_connection_info 1180{ 1181 UINT8 *Connection; 1182 UINT16 Length; 1183 UINT8 AccessLength; 1184 1185} ACPI_CONNECTION_INFO; 1186 1187 1188typedef 1189ACPI_STATUS (*ACPI_ADR_SPACE_SETUP) ( 1190 ACPI_HANDLE RegionHandle, 1191 UINT32 Function, 1192 void *HandlerContext, 1193 void **RegionContext); 1194 1195#define ACPI_REGION_ACTIVATE 0 1196#define ACPI_REGION_DEACTIVATE 1 1197 1198typedef 1199ACPI_STATUS (*ACPI_WALK_CALLBACK) ( 1200 ACPI_HANDLE Object, 1201 UINT32 NestingLevel, 1202 void *Context, 1203 void **ReturnValue); 1204 1205typedef 1206UINT32 (*ACPI_INTERFACE_HANDLER) ( 1207 ACPI_STRING InterfaceName, 1208 UINT32 Supported); 1209 1210 1211/* Interrupt handler return values */ 1212 1213#define ACPI_INTERRUPT_NOT_HANDLED 0x00 1214#define ACPI_INTERRUPT_HANDLED 0x01 1215 1216/* GPE handler return values */ 1217 1218#define ACPI_REENABLE_GPE 0x80 1219 1220 1221/* Length of 32-bit EISAID values when converted back to a string */ 1222 1223#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1224 1225/* Length of UUID (string) values */ 1226 1227#define ACPI_UUID_LENGTH 16 1228 1229 1230/* Structures used for device/processor HID, UID, CID, and SUB */ 1231 1232typedef struct acpi_pnp_device_id 1233{ 1234 UINT32 Length; /* Length of string + null */ 1235 char *String; 1236 1237} ACPI_PNP_DEVICE_ID; 1238 1239typedef struct acpi_pnp_device_id_list 1240{ 1241 UINT32 Count; /* Number of IDs in Ids array */ 1242 UINT32 ListSize; /* Size of list, including ID strings */ 1243 ACPI_PNP_DEVICE_ID Ids[1]; /* ID array */ 1244 1245} ACPI_PNP_DEVICE_ID_LIST; 1246 1247/* 1248 * Structure returned from AcpiGetObjectInfo. 1249 * Optimized for both 32- and 64-bit builds 1250 */ 1251typedef struct acpi_device_info 1252{ 1253 UINT32 InfoSize; /* Size of info, including ID strings */ 1254 UINT32 Name; /* ACPI object Name */ 1255 ACPI_OBJECT_TYPE Type; /* ACPI object Type */ 1256 UINT8 ParamCount; /* If a method, required parameter count */ 1257 UINT8 Valid; /* Indicates which optional fields are valid */ 1258 UINT8 Flags; /* Miscellaneous info */ 1259 UINT8 HighestDstates[4]; /* _SxD values: 0xFF indicates not valid */ 1260 UINT8 LowestDstates[5]; /* _SxW values: 0xFF indicates not valid */ 1261 UINT32 CurrentStatus; /* _STA value */ 1262 UINT64 Address; /* _ADR value */ 1263 ACPI_PNP_DEVICE_ID HardwareId; /* _HID value */ 1264 ACPI_PNP_DEVICE_ID UniqueId; /* _UID value */ 1265 ACPI_PNP_DEVICE_ID SubsystemId; /* _SUB value */ 1266 ACPI_PNP_DEVICE_ID_LIST CompatibleIdList; /* _CID list <must be last> */ 1267 1268} ACPI_DEVICE_INFO; 1269 1270/* Values for Flags field above (AcpiGetObjectInfo) */ 1271 1272#define ACPI_PCI_ROOT_BRIDGE 0x01 1273 1274/* Flags for Valid field above (AcpiGetObjectInfo) */ 1275 1276#define ACPI_VALID_STA 0x01 1277#define ACPI_VALID_ADR 0x02 1278#define ACPI_VALID_HID 0x04 1279#define ACPI_VALID_UID 0x08 1280#define ACPI_VALID_SUB 0x10 1281#define ACPI_VALID_CID 0x20 1282#define ACPI_VALID_SXDS 0x40 1283#define ACPI_VALID_SXWS 0x80 1284 1285/* Flags for _STA return value (CurrentStatus above) */ 1286 1287#define ACPI_STA_DEVICE_PRESENT 0x01 1288#define ACPI_STA_DEVICE_ENABLED 0x02 1289#define ACPI_STA_DEVICE_UI 0x04 1290#define ACPI_STA_DEVICE_FUNCTIONING 0x08 1291#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1292#define ACPI_STA_BATTERY_PRESENT 0x10 1293 1294 1295/* Context structs for address space handlers */ 1296 1297typedef struct acpi_pci_id 1298{ 1299 UINT16 Segment; 1300 UINT16 Bus; 1301 UINT16 Device; 1302 UINT16 Function; 1303 1304} ACPI_PCI_ID; 1305 1306typedef struct acpi_mem_space_context 1307{ 1308 UINT32 Length; 1309 ACPI_PHYSICAL_ADDRESS Address; 1310 ACPI_PHYSICAL_ADDRESS MappedPhysicalAddress; 1311 UINT8 *MappedLogicalAddress; 1312 ACPI_SIZE MappedLength; 1313 1314} ACPI_MEM_SPACE_CONTEXT; 1315 1316 1317/* 1318 * ACPI_MEMORY_LIST is used only if the ACPICA local cache is enabled 1319 */ 1320typedef struct acpi_memory_list 1321{ 1322 char *ListName; 1323 void *ListHead; 1324 UINT16 ObjectSize; 1325 UINT16 MaxDepth; 1326 UINT16 CurrentDepth; 1327 1328#ifdef ACPI_DBG_TRACK_ALLOCATIONS 1329 1330 /* Statistics for debug memory tracking only */ 1331 1332 UINT32 TotalAllocated; 1333 UINT32 TotalFreed; 1334 UINT32 MaxOccupied; 1335 UINT32 TotalSize; 1336 UINT32 CurrentTotalSize; 1337 UINT32 Requests; 1338 UINT32 Hits; 1339#endif 1340 1341} ACPI_MEMORY_LIST; 1342 1343 1344/* Definitions of _OSI support */ 1345 1346#define ACPI_VENDOR_STRINGS 0x01 1347#define ACPI_FEATURE_STRINGS 0x02 1348#define ACPI_ENABLE_INTERFACES 0x00 1349#define ACPI_DISABLE_INTERFACES 0x04 1350 1351#define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1352#define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1353#define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1354#define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1355#define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1356#define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1357 1358#define ACPI_OSI_WIN_2000 0x01 1359#define ACPI_OSI_WIN_XP 0x02 1360#define ACPI_OSI_WIN_XP_SP1 0x03 1361#define ACPI_OSI_WINSRV_2003 0x04 1362#define ACPI_OSI_WIN_XP_SP2 0x05 1363#define ACPI_OSI_WINSRV_2003_SP1 0x06 1364#define ACPI_OSI_WIN_VISTA 0x07 1365#define ACPI_OSI_WINSRV_2008 0x08 1366#define ACPI_OSI_WIN_VISTA_SP1 0x09 1367#define ACPI_OSI_WIN_VISTA_SP2 0x0A 1368#define ACPI_OSI_WIN_7 0x0B 1369#define ACPI_OSI_WIN_8 0x0C 1370#define ACPI_OSI_WIN_10 0x0D 1371 1372 1373/* Definitions of file IO */ 1374 1375#define ACPI_FILE_READING 0x01 1376#define ACPI_FILE_WRITING 0x02 1377#define ACPI_FILE_BINARY 0x04 1378 1379#define ACPI_FILE_BEGIN 0x01 1380#define ACPI_FILE_END 0x02 1381 1382 1383/* Definitions of getopt */ 1384 1385#define ACPI_OPT_END -1 1386 1387 1388#endif /* __ACTYPES_H__ */ 1389