NOTES revision 293675
1# $FreeBSD: stable/10/sys/conf/NOTES 293675 2016-01-11 17:53:24Z jimharris $ 2# 3# NOTES -- Lines that can be cut/pasted into kernel and hints configs. 4# 5# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', 6# 'makeoptions', 'hints', etc. go into the kernel configuration that you 7# run config(8) with. 8# 9# Lines that begin with 'hint.' are NOT for config(8), they go into your 10# hints file. See /boot/device.hints and/or the 'hints' config(8) directive. 11# 12# Please use ``make LINT'' to create an old-style LINT file if you want to 13# do kernel test-builds. 14# 15# This file contains machine independent kernel configuration notes. For 16# machine dependent notes, look in /sys/<arch>/conf/NOTES. 17# 18 19# 20# NOTES conventions and style guide: 21# 22# Large block comments should begin and end with a line containing only a 23# comment character. 24# 25# To describe a particular object, a block comment (if it exists) should 26# come first. Next should come device, options, and hints lines in that 27# order. All device and option lines must be described by a comment that 28# doesn't just expand the device or option name. Use only a concise 29# comment on the same line if possible. Very detailed descriptions of 30# devices and subsystems belong in man pages. 31# 32# A space followed by a tab separates 'options' from an option name. Two 33# spaces followed by a tab separate 'device' from a device name. Comments 34# after an option or device should use one space after the comment character. 35# To comment out a negative option that disables code and thus should not be 36# enabled for LINT builds, precede 'options' with "#!". 37# 38 39# 40# This is the ``identification'' of the kernel. Usually this should 41# be the same as the name of your kernel. 42# 43ident LINT 44 45# 46# The `maxusers' parameter controls the static sizing of a number of 47# internal system tables by a formula defined in subr_param.c. 48# Omitting this parameter or setting it to 0 will cause the system to 49# auto-size based on physical memory. 50# 51maxusers 10 52 53# To statically compile in device wiring instead of /boot/device.hints 54#hints "LINT.hints" # Default places to look for devices. 55 56# Use the following to compile in values accessible to the kernel 57# through getenv() (or kenv(1) in userland). The format of the file 58# is 'variable=value', see kenv(1) 59# 60#env "LINT.env" 61 62# 63# The `makeoptions' parameter allows variables to be passed to the 64# generated Makefile in the build area. 65# 66# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} 67# after most other flags. Here we use it to inhibit use of non-optimal 68# gcc built-in functions (e.g., memcmp). 69# 70# DEBUG happens to be magic. 71# The following is equivalent to 'config -g KERNELNAME' and creates 72# 'kernel.debug' compiled with -g debugging as well as a normal 73# 'kernel'. Use 'make install.debug' to install the debug kernel 74# but that isn't normally necessary as the debug symbols are not loaded 75# by the kernel and are not useful there anyway. 76# 77# KERNEL can be overridden so that you can change the default name of your 78# kernel. 79# 80# MODULES_OVERRIDE can be used to limit modules built to a specific list. 81# 82makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc. 83#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 84#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo" 85# Only build ext2fs module plus those parts of the sound system I need. 86#makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3" 87makeoptions DESTDIR=/tmp 88 89# 90# FreeBSD processes are subject to certain limits to their consumption 91# of system resources. See getrlimit(2) for more details. Each 92# resource limit has two values, a "soft" limit and a "hard" limit. 93# The soft limits can be modified during normal system operation, but 94# the hard limits are set at boot time. Their default values are 95# in sys/<arch>/include/vmparam.h. There are two ways to change them: 96# 97# 1. Set the values at kernel build time. The options below are one 98# way to allow that limit to grow to 1GB. They can be increased 99# further by changing the parameters: 100# 101# 2. In /boot/loader.conf, set the tunables kern.maxswzone, 102# kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz, 103# kern.dflssiz, kern.maxssiz and kern.sgrowsiz. 104# 105# The options in /boot/loader.conf override anything in the kernel 106# configuration file. See the function init_param1 in 107# sys/kern/subr_param.c for more details. 108# 109 110options MAXDSIZ=(1024UL*1024*1024) 111options MAXSSIZ=(128UL*1024*1024) 112options DFLDSIZ=(1024UL*1024*1024) 113 114# 115# BLKDEV_IOSIZE sets the default block size used in user block 116# device I/O. Note that this value will be overridden by the label 117# when specifying a block device from a label with a non-0 118# partition blocksize. The default is PAGE_SIZE. 119# 120options BLKDEV_IOSIZE=8192 121 122# 123# MAXPHYS and DFLTPHYS 124# 125# These are the maximal and safe 'raw' I/O block device access sizes. 126# Reads and writes will be split into MAXPHYS chunks for known good 127# devices and DFLTPHYS for the rest. Some applications have better 128# performance with larger raw I/O access sizes. Note that certain VM 129# parameters are derived from these values and making them too large 130# can make an an unbootable kernel. 131# 132# The defaults are 64K and 128K respectively. 133options DFLTPHYS=(64*1024) 134options MAXPHYS=(128*1024) 135 136 137# This allows you to actually store this configuration file into 138# the kernel binary itself. See config(8) for more details. 139# 140options INCLUDE_CONFIG_FILE # Include this file in kernel 141 142# 143# Compile-time defaults for various boot parameters 144# 145options BOOTVERBOSE=1 146options BOOTHOWTO=RB_MULTIPLE 147 148options GEOM_AES # Don't use, use GEOM_BDE 149options GEOM_BDE # Disk encryption. 150options GEOM_BSD # BSD disklabels 151options GEOM_CACHE # Disk cache. 152options GEOM_CONCAT # Disk concatenation. 153options GEOM_ELI # Disk encryption. 154options GEOM_FOX # Redundant path mitigation 155options GEOM_GATE # Userland services. 156options GEOM_JOURNAL # Journaling. 157options GEOM_LABEL # Providers labelization. 158options GEOM_LINUX_LVM # Linux LVM2 volumes 159options GEOM_MBR # DOS/MBR partitioning 160options GEOM_MIRROR # Disk mirroring. 161options GEOM_MULTIPATH # Disk multipath 162options GEOM_NOP # Test class. 163options GEOM_PART_APM # Apple partitioning 164options GEOM_PART_BSD # BSD disklabel 165options GEOM_PART_BSD64 # BSD disklabel64 166options GEOM_PART_EBR # Extended Boot Records 167options GEOM_PART_EBR_COMPAT # Backward compatible partition names 168options GEOM_PART_GPT # GPT partitioning 169options GEOM_PART_LDM # Logical Disk Manager 170options GEOM_PART_MBR # MBR partitioning 171options GEOM_PART_PC98 # PC-9800 disk partitioning 172options GEOM_PART_VTOC8 # SMI VTOC8 disk label 173options GEOM_PC98 # NEC PC9800 partitioning 174options GEOM_RAID # Soft RAID functionality. 175options GEOM_RAID3 # RAID3 functionality. 176options GEOM_SHSEC # Shared secret. 177options GEOM_STRIPE # Disk striping. 178options GEOM_SUNLABEL # Sun/Solaris partitioning 179options GEOM_UZIP # Read-only compressed disks 180options GEOM_VINUM # Vinum logical volume manager 181options GEOM_VIRSTOR # Virtual storage. 182options GEOM_VOL # Volume names from UFS superblock 183options GEOM_ZERO # Performance testing helper. 184 185# 186# The root device and filesystem type can be compiled in; 187# this provides a fallback option if the root device cannot 188# be correctly guessed by the bootstrap code, or an override if 189# the RB_DFLTROOT flag (-r) is specified when booting the kernel. 190# 191options ROOTDEVNAME=\"ufs:da0s2e\" 192 193 194##################################################################### 195# Scheduler options: 196# 197# Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options 198# select which scheduler is compiled in. 199# 200# SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run 201# queue and no CPU affinity which makes it suboptimal for SMP. It has very 202# good interactivity and priority selection. 203# 204# SCHED_ULE provides significant performance advantages over 4BSD on many 205# workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues 206# and scheduler locks. It also has a stronger notion of interactivity 207# which leads to better responsiveness even on uniprocessor machines. This 208# is the default scheduler. 209# 210# SCHED_STATS is a debugging option which keeps some stats in the sysctl 211# tree at 'kern.sched.stats' and is useful for debugging scheduling decisions. 212# 213options SCHED_4BSD 214options SCHED_STATS 215#options SCHED_ULE 216 217##################################################################### 218# SMP OPTIONS: 219# 220# SMP enables building of a Symmetric MultiProcessor Kernel. 221 222# Mandatory: 223options SMP # Symmetric MultiProcessor Kernel 224 225# MAXCPU defines the maximum number of CPUs that can boot in the system. 226# A default value should be already present, for every architecture. 227options MAXCPU=32 228 229# MAXMEMDOM defines the maximum number of memory domains that can boot in the 230# system. A default value should already be defined by every architecture. 231options MAXMEMDOM=1 232 233# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin 234# if the thread that currently owns the mutex is executing on another 235# CPU. This behavior is enabled by default, so this option can be used 236# to disable it. 237options NO_ADAPTIVE_MUTEXES 238 239# ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin 240# if the thread that currently owns the rwlock is executing on another 241# CPU. This behavior is enabled by default, so this option can be used 242# to disable it. 243options NO_ADAPTIVE_RWLOCKS 244 245# ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that 246# currently owns the sx lock is executing on another CPU. 247# This behavior is enabled by default, so this option can be used to 248# disable it. 249options NO_ADAPTIVE_SX 250 251# MUTEX_NOINLINE forces mutex operations to call functions to perform each 252# operation rather than inlining the simple cases. This can be used to 253# shrink the size of the kernel text segment. Note that this behavior is 254# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, 255# and WITNESS options. 256options MUTEX_NOINLINE 257 258# RWLOCK_NOINLINE forces rwlock operations to call functions to perform each 259# operation rather than inlining the simple cases. This can be used to 260# shrink the size of the kernel text segment. Note that this behavior is 261# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, 262# and WITNESS options. 263options RWLOCK_NOINLINE 264 265# SX_NOINLINE forces sx lock operations to call functions to perform each 266# operation rather than inlining the simple cases. This can be used to 267# shrink the size of the kernel text segment. Note that this behavior is 268# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING, 269# and WITNESS options. 270options SX_NOINLINE 271 272# SMP Debugging Options: 273# 274# CALLOUT_PROFILING enables rudimentary profiling of the callwheel data 275# structure used as backend in callout(9). 276# PREEMPTION allows the threads that are in the kernel to be preempted by 277# higher priority [interrupt] threads. It helps with interactivity 278# and allows interrupt threads to run sooner rather than waiting. 279# WARNING! Only tested on amd64 and i386. 280# FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel 281# threads. Its sole use is to expose race conditions and other 282# bugs during development. Enabling this option will reduce 283# performance and increase the frequency of kernel panics by 284# design. If you aren't sure that you need it then you don't. 285# Relies on the PREEMPTION option. DON'T TURN THIS ON. 286# MUTEX_DEBUG enables various extra assertions in the mutex code. 287# SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table 288# used to hold active sleep queues as well as sleep wait message 289# frequency. 290# TURNSTILE_PROFILING enables rudimentary profiling of the hash table 291# used to hold active lock queues. 292# UMTX_PROFILING enables rudimentary profiling of the hash table used 293 to hold active lock queues. 294# WITNESS enables the witness code which detects deadlocks and cycles 295# during locking operations. 296# WITNESS_KDB causes the witness code to drop into the kernel debugger if 297# a lock hierarchy violation occurs or if locks are held when going to 298# sleep. 299# WITNESS_SKIPSPIN disables the witness checks on spin mutexes. 300options PREEMPTION 301options FULL_PREEMPTION 302options MUTEX_DEBUG 303options WITNESS 304options WITNESS_KDB 305options WITNESS_SKIPSPIN 306 307# LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details. 308options LOCK_PROFILING 309# Set the number of buffers and the hash size. The hash size MUST be larger 310# than the number of buffers. Hash size should be prime. 311options MPROF_BUFFERS="1536" 312options MPROF_HASH_SIZE="1543" 313 314# Profiling for the callout(9) backend. 315options CALLOUT_PROFILING 316 317# Profiling for internal hash tables. 318options SLEEPQUEUE_PROFILING 319options TURNSTILE_PROFILING 320options UMTX_PROFILING 321 322 323##################################################################### 324# COMPATIBILITY OPTIONS 325 326# 327# Implement system calls compatible with 4.3BSD and older versions of 328# FreeBSD. You probably do NOT want to remove this as much current code 329# still relies on the 4.3 emulation. Note that some architectures that 330# are supported by FreeBSD do not include support for certain important 331# aspects of this compatibility option, namely those related to the 332# signal delivery mechanism. 333# 334options COMPAT_43 335 336# Old tty interface. 337options COMPAT_43TTY 338 339# Note that as a general rule, COMPAT_FREEBSD<n> depends on 340# COMPAT_FREEBSD<n+1>, COMPAT_FREEBSD<n+2>, etc. 341 342# Enable FreeBSD4 compatibility syscalls 343options COMPAT_FREEBSD4 344 345# Enable FreeBSD5 compatibility syscalls 346options COMPAT_FREEBSD5 347 348# Enable FreeBSD6 compatibility syscalls 349options COMPAT_FREEBSD6 350 351# Enable FreeBSD7 compatibility syscalls 352options COMPAT_FREEBSD7 353 354# Enable Linux Kernel Programming Interface 355#options COMPAT_LINUXKPI 356 357# 358# These three options provide support for System V Interface 359# Definition-style interprocess communication, in the form of shared 360# memory, semaphores, and message queues, respectively. 361# 362options SYSVSHM 363options SYSVSEM 364options SYSVMSG 365 366 367##################################################################### 368# DEBUGGING OPTIONS 369 370# 371# Compile with kernel debugger related code. 372# 373options KDB 374 375# 376# Print a stack trace of the current thread on the console for a panic. 377# 378options KDB_TRACE 379 380# 381# Don't enter the debugger for a panic. Intended for unattended operation 382# where you may want to enter the debugger from the console, but still want 383# the machine to recover from a panic. 384# 385options KDB_UNATTENDED 386 387# 388# Enable the ddb debugger backend. 389# 390options DDB 391 392# 393# Print the numerical value of symbols in addition to the symbolic 394# representation. 395# 396options DDB_NUMSYM 397 398# 399# Enable the remote gdb debugger backend. 400# 401options GDB 402 403# 404# SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the 405# contents of the registered sysctl nodes on the console. It is disabled by 406# default because it generates excessively verbose console output that can 407# interfere with serial console operation. 408# 409options SYSCTL_DEBUG 410 411# 412# Enable textdump by default, this disables kernel core dumps. 413# 414options TEXTDUMP_PREFERRED 415 416# 417# Enable extra debug messages while performing textdumps. 418# 419options TEXTDUMP_VERBOSE 420 421# 422# NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the 423# resulting kernel. 424options NO_SYSCTL_DESCR 425 426# 427# MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9) 428# allocations that are smaller than a page. The purpose is to isolate 429# different malloc types into hash classes, so that any buffer 430# overruns or use-after-free will usually only affect memory from 431# malloc types in that hash class. This is purely a debugging tool; 432# by varying the hash function and tracking which hash class was 433# corrupted, the intersection of the hash classes from each instance 434# will point to a single malloc type that is being misused. At this 435# point inspection or memguard(9) can be used to catch the offending 436# code. 437# 438options MALLOC_DEBUG_MAXZONES=8 439 440# 441# DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator 442# for the kernel used to detect modify-after-free scenarios. See the 443# memguard(9) man page for more information on usage. 444# 445options DEBUG_MEMGUARD 446 447# 448# DEBUG_REDZONE enables buffer underflows and buffer overflows detection for 449# malloc(9). 450# 451options DEBUG_REDZONE 452 453# 454# KTRACE enables the system-call tracing facility ktrace(2). To be more 455# SMP-friendly, KTRACE uses a worker thread to process most trace events 456# asynchronously to the thread generating the event. This requires a 457# pre-allocated store of objects representing trace events. The 458# KTRACE_REQUEST_POOL option specifies the initial size of this store. 459# The size of the pool can be adjusted both at boottime and runtime via 460# the kern.ktrace_request_pool tunable and sysctl. 461# 462options KTRACE #kernel tracing 463options KTRACE_REQUEST_POOL=101 464 465# 466# KTR is a kernel tracing facility imported from BSD/OS. It is 467# enabled with the KTR option. KTR_ENTRIES defines the number of 468# entries in the circular trace buffer; it may be an arbitrary number. 469# KTR_BOOT_ENTRIES defines the number of entries during the early boot, 470# before malloc(9) is functional. 471# KTR_COMPILE defines the mask of events to compile into the kernel as 472# defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the 473# initial value of the ktr_mask variable which determines at runtime 474# what events to trace. KTR_CPUMASK determines which CPU's log 475# events, with bit X corresponding to CPU X. The layout of the string 476# passed as KTR_CPUMASK must match a series of bitmasks each of them 477# separated by the "," character (ie: 478# KTR_CPUMASK=0xAF,0xFFFFFFFFFFFFFFFF). KTR_VERBOSE enables 479# dumping of KTR events to the console by default. This functionality 480# can be toggled via the debug.ktr_verbose sysctl and defaults to off 481# if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details. 482# 483options KTR 484options KTR_BOOT_ENTRIES=1024 485options KTR_ENTRIES=(128*1024) 486options KTR_COMPILE=(KTR_INTR|KTR_PROC) 487options KTR_MASK=KTR_INTR 488options KTR_CPUMASK=0x3 489options KTR_VERBOSE 490 491# 492# ALQ(9) is a facility for the asynchronous queuing of records from the kernel 493# to a vnode, and is employed by services such as ktr(4) to produce trace 494# files based on a kernel event stream. Records are written asynchronously 495# in a worker thread. 496# 497options ALQ 498options KTR_ALQ 499 500# 501# The INVARIANTS option is used in a number of source files to enable 502# extra sanity checking of internal structures. This support is not 503# enabled by default because of the extra time it would take to check 504# for these conditions, which can only occur as a result of 505# programming errors. 506# 507options INVARIANTS 508 509# 510# The INVARIANT_SUPPORT option makes us compile in support for 511# verifying some of the internal structures. It is a prerequisite for 512# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be 513# called. The intent is that you can set 'INVARIANTS' for single 514# source files (by changing the source file or specifying it on the 515# command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you 516# wish to build a kernel module with 'INVARIANTS', then adding 517# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary 518# infrastructure without the added overhead. 519# 520options INVARIANT_SUPPORT 521 522# 523# The DIAGNOSTIC option is used to enable extra debugging information 524# from some parts of the kernel. As this makes everything more noisy, 525# it is disabled by default. 526# 527options DIAGNOSTIC 528 529# 530# REGRESSION causes optional kernel interfaces necessary only for regression 531# testing to be enabled. These interfaces may constitute security risks 532# when enabled, as they permit processes to easily modify aspects of the 533# run-time environment to reproduce unlikely or unusual (possibly normally 534# impossible) scenarios. 535# 536options REGRESSION 537 538# 539# This option lets some drivers co-exist that can't co-exist in a running 540# system. This is used to be able to compile all kernel code in one go for 541# quality assurance purposes (like this file, which the option takes it name 542# from.) 543# 544options COMPILING_LINT 545 546# 547# STACK enables the stack(9) facility, allowing the capture of kernel stack 548# for the purpose of procinfo(1), etc. stack(9) will also be compiled in 549# automatically if DDB(4) is compiled into the kernel. 550# 551options STACK 552 553 554##################################################################### 555# PERFORMANCE MONITORING OPTIONS 556 557# 558# The hwpmc driver that allows the use of in-CPU performance monitoring 559# counters for performance monitoring. The base kernel needs to be configured 560# with the 'options' line, while the hwpmc device can be either compiled 561# in or loaded as a loadable kernel module. 562# 563# Additional configuration options may be required on specific architectures, 564# please see hwpmc(4). 565 566device hwpmc # Driver (also a loadable module) 567options HWPMC_DEBUG 568options HWPMC_HOOKS # Other necessary kernel hooks 569 570 571##################################################################### 572# NETWORKING OPTIONS 573 574# 575# Protocol families 576# 577options INET #Internet communications protocols 578options INET6 #IPv6 communications protocols 579 580options ROUTETABLES=2 # allocated fibs up to 65536. default is 1. 581 # but that would be a bad idea as they are large. 582 583options TCP_OFFLOAD # TCP offload support. 584 585# In order to enable IPSEC you MUST also add device crypto to 586# your kernel configuration 587options IPSEC #IP security (requires device crypto) 588#options IPSEC_DEBUG #debug for IP security 589# 590# #DEPRECATED# 591# Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets 592# coming through a tunnel to be processed by any configured packet filtering 593# twice. The default is that packets coming out of a tunnel are _not_ processed; 594# they are assumed trusted. 595# 596# IPSEC history is preserved for such packets, and can be filtered 597# using ipfw(8)'s 'ipsec' keyword, when this option is enabled. 598# 599#options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel 600# 601# Set IPSEC_NAT_T to enable NAT-Traversal support. This enables 602# optional UDP encapsulation of ESP packets. 603# 604options IPSEC_NAT_T #NAT-T support, UDP encap of ESP 605 606options IPX #IPX/SPX communications protocols 607 608options NETATALK #Appletalk communications protocols 609options NETATALKDEBUG #Appletalk debugging 610 611# 612# SMB/CIFS requester 613# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV 614# options. 615options NETSMB #SMB/CIFS requester 616 617# mchain library. It can be either loaded as KLD or compiled into kernel 618options LIBMCHAIN 619 620# libalias library, performing NAT 621options LIBALIAS 622 623# flowtable cache 624options FLOWTABLE 625 626# 627# SCTP is a NEW transport protocol defined by 628# RFC2960 updated by RFC3309 and RFC3758.. and 629# soon to have a new base RFC and many many more 630# extensions. This release supports all the extensions 631# including many drafts (most about to become RFC's). 632# It is the reference implementation of SCTP 633# and is quite well tested. 634# 635# Note YOU MUST have both INET and INET6 defined. 636# You don't have to enable V6, but SCTP is 637# dual stacked and so far we have not torn apart 638# the V6 and V4.. since an association can span 639# both a V6 and V4 address at the SAME time :-) 640# 641options SCTP 642# There are bunches of options: 643# this one turns on all sorts of 644# nastily printing that you can 645# do. It's all controlled by a 646# bit mask (settable by socket opt and 647# by sysctl). Including will not cause 648# logging until you set the bits.. but it 649# can be quite verbose.. so without this 650# option we don't do any of the tests for 651# bits and prints.. which makes the code run 652# faster.. if you are not debugging don't use. 653options SCTP_DEBUG 654# 655# This option turns off the CRC32c checksum. Basically, 656# you will not be able to talk to anyone else who 657# has not done this. Its more for experimentation to 658# see how much CPU the CRC32c really takes. Most new 659# cards for TCP support checksum offload.. so this 660# option gives you a "view" into what SCTP would be 661# like with such an offload (which only exists in 662# high in iSCSI boards so far). With the new 663# splitting 8's algorithm its not as bad as it used 664# to be.. but it does speed things up try only 665# for in a captured lab environment :-) 666options SCTP_WITH_NO_CSUM 667# 668 669# 670# All that options after that turn on specific types of 671# logging. You can monitor CWND growth, flight size 672# and all sorts of things. Go look at the code and 673# see. I have used this to produce interesting 674# charts and graphs as well :-> 675# 676# I have not yet committed the tools to get and print 677# the logs, I will do that eventually .. before then 678# if you want them send me an email rrs@freebsd.org 679# You basically must have ktr(4) enabled for these 680# and you then set the sysctl to turn on/off various 681# logging bits. Use ktrdump(8) to pull the log and run 682# it through a display program.. and graphs and other 683# things too. 684# 685options SCTP_LOCK_LOGGING 686options SCTP_MBUF_LOGGING 687options SCTP_MBCNT_LOGGING 688options SCTP_PACKET_LOGGING 689options SCTP_LTRACE_CHUNKS 690options SCTP_LTRACE_ERRORS 691 692 693# altq(9). Enable the base part of the hooks with the ALTQ option. 694# Individual disciplines must be built into the base system and can not be 695# loaded as modules at this point. ALTQ requires a stable TSC so if yours is 696# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC 697# option. 698options ALTQ 699options ALTQ_CBQ # Class Based Queueing 700options ALTQ_RED # Random Early Detection 701options ALTQ_RIO # RED In/Out 702options ALTQ_HFSC # Hierarchical Packet Scheduler 703options ALTQ_CDNR # Traffic conditioner 704options ALTQ_PRIQ # Priority Queueing 705options ALTQ_NOPCC # Required if the TSC is unusable 706options ALTQ_DEBUG 707 708# netgraph(4). Enable the base netgraph code with the NETGRAPH option. 709# Individual node types can be enabled with the corresponding option 710# listed below; however, this is not strictly necessary as netgraph 711# will automatically load the corresponding KLD module if the node type 712# is not already compiled into the kernel. Each type below has a 713# corresponding man page, e.g., ng_async(8). 714options NETGRAPH # netgraph(4) system 715options NETGRAPH_DEBUG # enable extra debugging, this 716 # affects netgraph(4) and nodes 717# Node types 718options NETGRAPH_ASYNC 719options NETGRAPH_ATMLLC 720options NETGRAPH_ATM_ATMPIF 721options NETGRAPH_BLUETOOTH # ng_bluetooth(4) 722options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4) 723options NETGRAPH_BLUETOOTH_HCI # ng_hci(4) 724options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4) 725options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4) 726options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4) 727options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4) 728options NETGRAPH_BPF 729options NETGRAPH_BRIDGE 730options NETGRAPH_CAR 731options NETGRAPH_CISCO 732options NETGRAPH_DEFLATE 733options NETGRAPH_DEVICE 734options NETGRAPH_ECHO 735options NETGRAPH_EIFACE 736options NETGRAPH_ETHER 737options NETGRAPH_FEC 738options NETGRAPH_FRAME_RELAY 739options NETGRAPH_GIF 740options NETGRAPH_GIF_DEMUX 741options NETGRAPH_HOLE 742options NETGRAPH_IFACE 743options NETGRAPH_IP_INPUT 744options NETGRAPH_IPFW 745options NETGRAPH_KSOCKET 746options NETGRAPH_L2TP 747options NETGRAPH_LMI 748# MPPC compression requires proprietary files (not included) 749#options NETGRAPH_MPPC_COMPRESSION 750options NETGRAPH_MPPC_ENCRYPTION 751options NETGRAPH_NETFLOW 752options NETGRAPH_NAT 753options NETGRAPH_ONE2MANY 754options NETGRAPH_PATCH 755options NETGRAPH_PIPE 756options NETGRAPH_PPP 757options NETGRAPH_PPPOE 758options NETGRAPH_PPTPGRE 759options NETGRAPH_PRED1 760options NETGRAPH_RFC1490 761options NETGRAPH_SOCKET 762options NETGRAPH_SPLIT 763options NETGRAPH_SPPP 764options NETGRAPH_TAG 765options NETGRAPH_TCPMSS 766options NETGRAPH_TEE 767options NETGRAPH_UI 768options NETGRAPH_VJC 769options NETGRAPH_VLAN 770 771# NgATM - Netgraph ATM 772options NGATM_ATM 773options NGATM_ATMBASE 774options NGATM_SSCOP 775options NGATM_SSCFU 776options NGATM_UNI 777options NGATM_CCATM 778 779device mn # Munich32x/Falc54 Nx64kbit/sec cards. 780 781# Network stack virtualization. 782#options VIMAGE 783#options VNET_DEBUG # debug for VIMAGE 784 785# 786# Network interfaces: 787# The `loop' device is MANDATORY when networking is enabled. 788device loop 789 790# The `ether' device provides generic code to handle 791# Ethernets; it is MANDATORY when an Ethernet device driver is 792# configured or token-ring is enabled. 793device ether 794 795# The `vlan' device implements the VLAN tagging of Ethernet frames 796# according to IEEE 802.1Q. 797device vlan 798 799# The `vxlan' device implements the VXLAN encapsulation of Ethernet 800# frames in UDP packets according to RFC7348. 801device vxlan 802 803# The `wlan' device provides generic code to support 802.11 804# drivers, including host AP mode; it is MANDATORY for the wi, 805# and ath drivers and will eventually be required by all 802.11 drivers. 806device wlan 807options IEEE80211_DEBUG #enable debugging msgs 808options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's 809options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 810options IEEE80211_SUPPORT_TDMA #enable TDMA support 811 812# The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide 813# support for WEP, TKIP, and AES-CCMP crypto protocols optionally 814# used with 802.11 devices that depend on the `wlan' module. 815device wlan_wep 816device wlan_ccmp 817device wlan_tkip 818 819# The `wlan_xauth' device provides support for external (i.e. user-mode) 820# authenticators for use with 802.11 drivers that use the `wlan' 821# module and support 802.1x and/or WPA security protocols. 822device wlan_xauth 823 824# The `wlan_acl' device provides a MAC-based access control mechanism 825# for use with 802.11 drivers operating in ap mode and using the 826# `wlan' module. 827# The 'wlan_amrr' device provides AMRR transmit rate control algorithm 828device wlan_acl 829device wlan_amrr 830 831# Generic TokenRing 832device token 833 834# The `fddi' device provides generic code to support FDDI. 835device fddi 836 837# The `arcnet' device provides generic code to support Arcnet. 838device arcnet 839 840# The `sppp' device serves a similar role for certain types 841# of synchronous PPP links (like `cx', `ar'). 842device sppp 843 844# The `bpf' device enables the Berkeley Packet Filter. Be 845# aware of the legal and administrative consequences of enabling this 846# option. DHCP requires bpf. 847device bpf 848 849# The `netmap' device implements memory-mapped access to network 850# devices from userspace, enabling wire-speed packet capture and 851# generation even at 10Gbit/s. Requires support in the device 852# driver. Supported drivers are ixgbe, e1000, re. 853device netmap 854 855# The `disc' device implements a minimal network interface, 856# which throws away all packets sent and never receives any. It is 857# included for testing and benchmarking purposes. 858device disc 859 860# The `epair' device implements a virtual back-to-back connected Ethernet 861# like interface pair. 862device epair 863 864# The `edsc' device implements a minimal Ethernet interface, 865# which discards all packets sent and receives none. 866device edsc 867 868# The `tap' device is a pty-like virtual Ethernet interface 869device tap 870 871# The `tun' device implements (user-)ppp and nos-tun(8) 872device tun 873 874# The `gif' device implements IPv6 over IP4 tunneling, 875# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and 876# IPv6 over IPv6 tunneling. 877# The `gre' device implements GRE (Generic Routing Encapsulation) tunneling, 878# as specified in the RFC 2784 and RFC 2890. 879# The `me' device implements Minimal Encapsulation within IPv4 as 880# specified in the RFC 2004. 881# The XBONEHACK option allows the same pair of addresses to be configured on 882# multiple gif interfaces. 883device gif 884device gre 885device me 886options XBONEHACK 887 888# The `faith' device captures packets sent to it and diverts them 889# to the IPv4/IPv6 translation daemon. 890# The `stf' device implements 6to4 encapsulation. 891device faith 892device stf 893 894# The `ef' device provides support for multiple ethernet frame types 895# specified via ETHER_* options. See ef(4) for details. 896device ef 897options ETHER_II # enable Ethernet_II frame 898options ETHER_8023 # enable Ethernet_802.3 (Novell) frame 899options ETHER_8022 # enable Ethernet_802.2 frame 900options ETHER_SNAP # enable Ethernet_802.2/SNAP frame 901 902# The pf packet filter consists of three devices: 903# The `pf' device provides /dev/pf and the firewall code itself. 904# The `pflog' device provides the pflog0 interface which logs packets. 905# The `pfsync' device provides the pfsync0 interface used for 906# synchronization of firewall state tables (over the net). 907device pf 908device pflog 909device pfsync 910 911# Bridge interface. 912device if_bridge 913 914# Common Address Redundancy Protocol. See carp(4) for more details. 915device carp 916 917# IPsec interface. 918device enc 919 920# Link aggregation interface. 921device lagg 922 923# 924# Internet family options: 925# 926# MROUTING enables the kernel multicast packet forwarder, which works 927# with mrouted and XORP. 928# 929# IPFIREWALL enables support for IP firewall construction, in 930# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends 931# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT 932# limits the number of times a matching entry can be logged. 933# 934# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" 935# and if you do not add other rules during startup to allow access, 936# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open 937# in /etc/rc.conf when first enabling this feature, then refining the 938# firewall rules in /etc/rc.firewall after you've tested that the new kernel 939# feature works properly. 940# 941# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to 942# allow everything. Use with care, if a cracker can crash your 943# firewall machine, they can get to your protected machines. However, 944# if you are using it as an as-needed filter for specific problems as 945# they arise, then this may be for you. Changing the default to 'allow' 946# means that you won't get stuck if the kernel and /sbin/ipfw binary get 947# out of sync. 948# 949# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It 950# depends on IPFIREWALL if compiled into the kernel. 951# 952# IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires 953# LIBALIAS. 954# 955# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding 956# packets without touching the TTL). This can be useful to hide firewalls 957# from traceroute and similar tools. 958# 959# PF_DEFAULT_TO_DROP causes the default pf(4) rule to deny everything. 960# 961# TCPDEBUG enables code which keeps traces of the TCP state machine 962# for sockets with the SO_DEBUG option set, which can then be examined 963# using the trpt(8) utility. 964# 965# RADIX_MPATH provides support for equal-cost multi-path routing. 966# 967options MROUTING # Multicast routing 968options IPFIREWALL #firewall 969options IPFIREWALL_VERBOSE #enable logging to syslogd(8) 970options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity 971options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default 972options IPFIREWALL_NAT #ipfw kernel nat support 973options IPDIVERT #divert sockets 974options IPFILTER #ipfilter support 975options IPFILTER_LOG #ipfilter logging 976options IPFILTER_LOOKUP #ipfilter pools 977options IPFILTER_DEFAULT_BLOCK #block all packets by default 978options IPSTEALTH #support for stealth forwarding 979options PF_DEFAULT_TO_DROP #drop everything by default 980options TCPDEBUG 981options RADIX_MPATH 982 983# The MBUF_STRESS_TEST option enables options which create 984# various random failures / extreme cases related to mbuf 985# functions. See mbuf(9) for a list of available test cases. 986# MBUF_PROFILING enables code to profile the mbuf chains 987# exiting the system (via participating interfaces) and 988# return a logarithmic histogram of monitored parameters 989# (e.g. packet size, wasted space, number of mbufs in chain). 990options MBUF_STRESS_TEST 991options MBUF_PROFILING 992 993# Statically link in accept filters 994options ACCEPT_FILTER_DATA 995options ACCEPT_FILTER_DNS 996options ACCEPT_FILTER_HTTP 997 998# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are 999# carried in TCP option 19. This option is commonly used to protect 1000# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable. 1001# This is enabled on a per-socket basis using the TCP_MD5SIG socket option. 1002# This requires the use of 'device crypto', 'options IPSEC' 1003# or 'device cryptodev'. 1004options TCP_SIGNATURE #include support for RFC 2385 1005 1006# DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL 1007# as well. See dummynet(4) and ipfw(8) for more info. When you run 1008# DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve 1009# a smooth scheduling of the traffic. 1010options DUMMYNET 1011 1012##################################################################### 1013# FILESYSTEM OPTIONS 1014 1015# 1016# Only the root filesystem needs to be statically compiled or preloaded 1017# as module; everything else will be automatically loaded at mount 1018# time. Some people still prefer to statically compile other 1019# filesystems as well. 1020# 1021# NB: The UNION filesystem was known to be buggy in the past. It is now 1022# being actively maintained, although there are still some issues being 1023# resolved. 1024# 1025 1026# One of these is mandatory: 1027options FFS #Fast filesystem 1028options NFSCLIENT #Network File System client 1029 1030# The rest are optional: 1031options AUTOFS #Automounter filesystem 1032options CD9660 #ISO 9660 filesystem 1033options FDESCFS #File descriptor filesystem 1034options FUSE #FUSE support module 1035options MSDOSFS #MS DOS File System (FAT, FAT32) 1036options NFSSERVER #Network File System server 1037options NFSLOCKD #Network Lock Manager 1038options NFSCL #New Network Filesystem Client 1039options NFSD #New Network Filesystem Server 1040options KGSSAPI #Kernel GSSAPI implementation 1041 1042options NULLFS #NULL filesystem 1043options PROCFS #Process filesystem (requires PSEUDOFS) 1044options PSEUDOFS #Pseudo-filesystem framework 1045options PSEUDOFS_TRACE #Debugging support for PSEUDOFS 1046options SMBFS #SMB/CIFS filesystem 1047options TMPFS #Efficient memory filesystem 1048options UDF #Universal Disk Format 1049options UNIONFS #Union filesystem 1050# The xFS_ROOT options REQUIRE the associated ``options xFS'' 1051options NFS_ROOT #NFS usable as root device 1052 1053# Soft updates is a technique for improving filesystem speed and 1054# making abrupt shutdown less risky. 1055# 1056options SOFTUPDATES 1057 1058# Extended attributes allow additional data to be associated with files, 1059# and is used for ACLs, Capabilities, and MAC labels. 1060# See src/sys/ufs/ufs/README.extattr for more information. 1061options UFS_EXTATTR 1062options UFS_EXTATTR_AUTOSTART 1063 1064# Access Control List support for UFS filesystems. The current ACL 1065# implementation requires extended attribute support, UFS_EXTATTR, 1066# for the underlying filesystem. 1067# See src/sys/ufs/ufs/README.acls for more information. 1068options UFS_ACL 1069 1070# Directory hashing improves the speed of operations on very large 1071# directories at the expense of some memory. 1072options UFS_DIRHASH 1073 1074# Gjournal-based UFS journaling support. 1075options UFS_GJOURNAL 1076 1077# Make space in the kernel for a root filesystem on a md device. 1078# Define to the number of kilobytes to reserve for the filesystem. 1079options MD_ROOT_SIZE=10 1080 1081# Make the md device a potential root device, either with preloaded 1082# images of type mfs_root or md_root. 1083options MD_ROOT 1084 1085# Disk quotas are supported when this option is enabled. 1086options QUOTA #enable disk quotas 1087 1088# If you are running a machine just as a fileserver for PC and MAC 1089# users, using SAMBA or Netatalk, you may consider setting this option 1090# and keeping all those users' directories on a filesystem that is 1091# mounted with the suiddir option. This gives new files the same 1092# ownership as the directory (similar to group). It's a security hole 1093# if you let these users run programs, so confine it to file-servers 1094# (but it'll save you lots of headaches in those cases). Root owned 1095# directories are exempt and X bits are cleared. The suid bit must be 1096# set on the directory as well; see chmod(1). PC owners can't see/set 1097# ownerships so they keep getting their toes trodden on. This saves 1098# you all the support calls as the filesystem it's used on will act as 1099# they expect: "It's my dir so it must be my file". 1100# 1101options SUIDDIR 1102 1103# NFS options: 1104options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec 1105options NFS_MAXATTRTIMO=60 1106options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec 1107options NFS_MAXDIRATTRTIMO=60 1108options NFS_GATHERDELAY=10 # Default write gather delay (msec) 1109options NFS_WDELAYHASHSIZ=16 # and with this 1110options NFS_DEBUG # Enable NFS Debugging 1111 1112# 1113# Add support for the EXT2FS filesystem of Linux fame. Be a bit 1114# careful with this - the ext2fs code has a tendency to lag behind 1115# changes and not be exercised very much, so mounting read/write could 1116# be dangerous (and even mounting read only could result in panics.) 1117# 1118options EXT2FS 1119 1120# 1121# Add support for the ReiserFS filesystem (used in Linux). Currently, 1122# this is limited to read-only access. 1123# 1124options REISERFS 1125 1126# Use real implementations of the aio_* system calls. There are numerous 1127# stability and security issues in the current aio code that make it 1128# unsuitable for inclusion on machines with untrusted local users. 1129options VFS_AIO 1130 1131# Cryptographically secure random number generator; /dev/random 1132device random 1133 1134# The system memory devices; /dev/mem, /dev/kmem 1135device mem 1136 1137# The kernel symbol table device; /dev/ksyms 1138device ksyms 1139 1140# Optional character code conversion support with LIBICONV. 1141# Each option requires their base file system and LIBICONV. 1142options CD9660_ICONV 1143options MSDOSFS_ICONV 1144options UDF_ICONV 1145 1146 1147##################################################################### 1148# POSIX P1003.1B 1149 1150# Real time extensions added in the 1993 POSIX 1151# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING 1152 1153options _KPOSIX_PRIORITY_SCHEDULING 1154# p1003_1b_semaphores are very experimental, 1155# user should be ready to assist in debugging if problems arise. 1156options P1003_1B_SEMAPHORES 1157 1158# POSIX message queue 1159options P1003_1B_MQUEUE 1160 1161##################################################################### 1162# SECURITY POLICY PARAMETERS 1163 1164# Support for BSM audit 1165options AUDIT 1166 1167# Support for Mandatory Access Control (MAC): 1168options MAC 1169options MAC_BIBA 1170options MAC_BSDEXTENDED 1171options MAC_IFOFF 1172options MAC_LOMAC 1173options MAC_MLS 1174options MAC_NONE 1175options MAC_PARTITION 1176options MAC_PORTACL 1177options MAC_SEEOTHERUIDS 1178options MAC_STUB 1179options MAC_TEST 1180 1181# Support for Capsicum 1182options CAPABILITIES # fine-grained rights on file descriptors 1183options CAPABILITY_MODE # sandboxes with no global namespace access 1184 1185# Support for process descriptors 1186options PROCDESC 1187 1188 1189##################################################################### 1190# CLOCK OPTIONS 1191 1192# The granularity of operation is controlled by the kernel option HZ whose 1193# default value (1000 on most architectures) means a granularity of 1ms 1194# (1s/HZ). Historically, the default was 100, but finer granularity is 1195# required for DUMMYNET and other systems on modern hardware. There are 1196# reasonable arguments that HZ should, in fact, be 100 still; consider, 1197# that reducing the granularity too much might cause excessive overhead in 1198# clock interrupt processing, potentially causing ticks to be missed and thus 1199# actually reducing the accuracy of operation. 1200 1201options HZ=100 1202 1203# Enable support for the kernel PLL to use an external PPS signal, 1204# under supervision of [x]ntpd(8) 1205# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp 1206 1207options PPS_SYNC 1208 1209# Enable support for generic feed-forward clocks in the kernel. 1210# The feed-forward clock support is an alternative to the feedback oriented 1211# ntpd/system clock approach, and is to be used with a feed-forward 1212# synchronization algorithm such as the RADclock: 1213# More info here: http://www.synclab.org/radclock 1214 1215options FFCLOCK 1216 1217 1218##################################################################### 1219# SCSI DEVICES 1220 1221# SCSI DEVICE CONFIGURATION 1222 1223# The SCSI subsystem consists of the `base' SCSI code, a number of 1224# high-level SCSI device `type' drivers, and the low-level host-adapter 1225# device drivers. The host adapters are listed in the ISA and PCI 1226# device configuration sections below. 1227# 1228# It is possible to wire down your SCSI devices so that a given bus, 1229# target, and LUN always come on line as the same device unit. In 1230# earlier versions the unit numbers were assigned in the order that 1231# the devices were probed on the SCSI bus. This means that if you 1232# removed a disk drive, you may have had to rewrite your /etc/fstab 1233# file, and also that you had to be careful when adding a new disk 1234# as it may have been probed earlier and moved your device configuration 1235# around. (See also option GEOM_VOL for a different solution to this 1236# problem.) 1237 1238# This old behavior is maintained as the default behavior. The unit 1239# assignment begins with the first non-wired down unit for a device 1240# type. For example, if you wire a disk as "da3" then the first 1241# non-wired disk will be assigned da4. 1242 1243# The syntax for wiring down devices is: 1244 1245hint.scbus.0.at="ahc0" 1246hint.scbus.1.at="ahc1" 1247hint.scbus.1.bus="0" 1248hint.scbus.3.at="ahc2" 1249hint.scbus.3.bus="0" 1250hint.scbus.2.at="ahc2" 1251hint.scbus.2.bus="1" 1252hint.da.0.at="scbus0" 1253hint.da.0.target="0" 1254hint.da.0.unit="0" 1255hint.da.1.at="scbus3" 1256hint.da.1.target="1" 1257hint.da.2.at="scbus2" 1258hint.da.2.target="3" 1259hint.sa.1.at="scbus1" 1260hint.sa.1.target="6" 1261 1262# "units" (SCSI logical unit number) that are not specified are 1263# treated as if specified as LUN 0. 1264 1265# All SCSI devices allocate as many units as are required. 1266 1267# The ch driver drives SCSI Media Changer ("jukebox") devices. 1268# 1269# The da driver drives SCSI Direct Access ("disk") and Optical Media 1270# ("WORM") devices. 1271# 1272# The sa driver drives SCSI Sequential Access ("tape") devices. 1273# 1274# The cd driver drives SCSI Read Only Direct Access ("cd") devices. 1275# 1276# The ses driver drives SCSI Environment Services ("ses") and 1277# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. 1278# 1279# The pt driver drives SCSI Processor devices. 1280# 1281# The sg driver provides a passthrough API that is compatible with the 1282# Linux SG driver. It will work in conjunction with the COMPAT_LINUX 1283# option to run linux SG apps. It can also stand on its own and provide 1284# source level API compatibility for porting apps to FreeBSD. 1285# 1286# Target Mode support is provided here but also requires that a SIM 1287# (SCSI Host Adapter Driver) provide support as well. 1288# 1289# The targ driver provides target mode support as a Processor type device. 1290# It exists to give the minimal context necessary to respond to Inquiry 1291# commands. There is a sample user application that shows how the rest 1292# of the command support might be done in /usr/share/examples/scsi_target. 1293# 1294# The targbh driver provides target mode support and exists to respond 1295# to incoming commands that do not otherwise have a logical unit assigned 1296# to them. 1297# 1298# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI 1299# configuration as the "pass" driver. 1300 1301device scbus #base SCSI code 1302device ch #SCSI media changers 1303device da #SCSI direct access devices (aka disks) 1304device sa #SCSI tapes 1305device cd #SCSI CD-ROMs 1306device ses #Enclosure Services (SES and SAF-TE) 1307device pt #SCSI processor 1308device targ #SCSI Target Mode Code 1309device targbh #SCSI Target Mode Blackhole Device 1310device pass #CAM passthrough driver 1311device sg #Linux SCSI passthrough 1312device ctl #CAM Target Layer 1313 1314# CAM OPTIONS: 1315# debugging options: 1316# CAMDEBUG Compile in all possible debugging. 1317# CAM_DEBUG_COMPILE Debug levels to compile in. 1318# CAM_DEBUG_FLAGS Debug levels to enable on boot. 1319# CAM_DEBUG_BUS Limit debugging to the given bus. 1320# CAM_DEBUG_TARGET Limit debugging to the given target. 1321# CAM_DEBUG_LUN Limit debugging to the given lun. 1322# CAM_DEBUG_DELAY Delay in us after printing each debug line. 1323# 1324# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds 1325# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions 1326# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions 1327# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) 1328# queue after a bus reset, and the number of milliseconds to 1329# freeze the device queue after a bus device reset. This 1330# can be changed at boot and runtime with the 1331# kern.cam.scsi_delay tunable/sysctl. 1332options CAMDEBUG 1333options CAM_DEBUG_COMPILE=-1 1334options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) 1335options CAM_DEBUG_BUS=-1 1336options CAM_DEBUG_TARGET=-1 1337options CAM_DEBUG_LUN=-1 1338options CAM_DEBUG_DELAY=1 1339options CAM_MAX_HIGHPOWER=4 1340options SCSI_NO_SENSE_STRINGS 1341options SCSI_NO_OP_STRINGS 1342options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device 1343 1344# Options for the CAM CDROM driver: 1345# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN 1346# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only 1347# enforced if there is I/O waiting for another LUN 1348# The compiled in defaults for these variables are 2 and 10 seconds, 1349# respectively. 1350# 1351# These can also be changed on the fly with the following sysctl variables: 1352# kern.cam.cd.changer.min_busy_seconds 1353# kern.cam.cd.changer.max_busy_seconds 1354# 1355options CHANGER_MIN_BUSY_SECONDS=2 1356options CHANGER_MAX_BUSY_SECONDS=10 1357 1358# Options for the CAM sequential access driver: 1359# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes 1360# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes 1361# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes 1362# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes 1363# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT. 1364options SA_IO_TIMEOUT=4 1365options SA_SPACE_TIMEOUT=60 1366options SA_REWIND_TIMEOUT=(2*60) 1367options SA_ERASE_TIMEOUT=(4*60) 1368options SA_1FM_AT_EOD 1369 1370# Optional timeout for the CAM processor target (pt) device 1371# This is specified in seconds. The default is 60 seconds. 1372options SCSI_PT_DEFAULT_TIMEOUT=60 1373 1374# Optional enable of doing SES passthrough on other devices (e.g., disks) 1375# 1376# Normally disabled because a lot of newer SCSI disks report themselves 1377# as having SES capabilities, but this can then clot up attempts to build 1378# a topology with the SES device that's on the box these drives are in.... 1379options SES_ENABLE_PASSTHROUGH 1380 1381 1382##################################################################### 1383# MISCELLANEOUS DEVICES AND OPTIONS 1384 1385device pty #BSD-style compatibility pseudo ttys 1386device nmdm #back-to-back tty devices 1387device md #Memory/malloc disk 1388device snp #Snoop device - to look at pty/vty/etc.. 1389device ccd #Concatenated disk driver 1390device firmware #firmware(9) support 1391 1392# Kernel side iconv library 1393options LIBICONV 1394 1395# Size of the kernel message buffer. Should be N * pagesize. 1396options MSGBUF_SIZE=40960 1397 1398 1399##################################################################### 1400# HARDWARE DEVICE CONFIGURATION 1401 1402# For ISA the required hints are listed. 1403# EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so 1404# no hints are needed. 1405 1406# 1407# Mandatory devices: 1408# 1409 1410# These options are valid for other keyboard drivers as well. 1411options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap 1412options KBD_INSTALL_CDEV # install a CDEV entry in /dev 1413 1414options FB_DEBUG # Frame buffer debugging 1415 1416device splash # Splash screen and screen saver support 1417 1418# Various screen savers. 1419device blank_saver 1420device daemon_saver 1421device dragon_saver 1422device fade_saver 1423device fire_saver 1424device green_saver 1425device logo_saver 1426device rain_saver 1427device snake_saver 1428device star_saver 1429device warp_saver 1430 1431# The syscons console driver (SCO color console compatible). 1432device sc 1433hint.sc.0.at="isa" 1434options MAXCONS=16 # number of virtual consoles 1435options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode 1436options SC_DFLT_FONT # compile font in 1437makeoptions SC_DFLT_FONT=cp850 1438options SC_DISABLE_KDBKEY # disable `debug' key 1439options SC_DISABLE_REBOOT # disable reboot key sequence 1440options SC_HISTORY_SIZE=200 # number of history buffer lines 1441options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor 1442options SC_PIXEL_MODE # add support for the raster text mode 1443 1444# The following options will let you change the default colors of syscons. 1445options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) 1446options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) 1447options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) 1448options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) 1449 1450# The following options will let you change the default behavior of 1451# cut-n-paste feature 1452options SC_CUT_SPACES2TABS # convert leading spaces into tabs 1453options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words 1454 # (default is single space - \"x20\") 1455 1456# If you have a two button mouse, you may want to add the following option 1457# to use the right button of the mouse to paste text. 1458options SC_TWOBUTTON_MOUSE 1459 1460# You can selectively disable features in syscons. 1461options SC_NO_CUTPASTE 1462options SC_NO_FONT_LOADING 1463options SC_NO_HISTORY 1464options SC_NO_MODE_CHANGE 1465options SC_NO_SYSMOUSE 1466options SC_NO_SUSPEND_VTYSWITCH 1467 1468# `flags' for sc 1469# 0x80 Put the video card in the VESA 800x600 dots, 16 color mode 1470# 0x100 Probe for a keyboard device periodically if one is not present 1471 1472# Enable experimental features of the syscons terminal emulator (teken). 1473options TEKEN_CONS25 # cons25-style terminal emulation 1474options TEKEN_UTF8 # UTF-8 output handling 1475 1476# 1477# Optional devices: 1478# 1479 1480# 1481# SCSI host adapters: 1482# 1483# adv: All Narrow SCSI bus AdvanSys controllers. 1484# adw: Second Generation AdvanSys controllers including the ADV940UW. 1485# aha: Adaptec 154x/1535/1640 1486# ahb: Adaptec 174x EISA controllers 1487# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ 1488# 19160x/29160x, aic7770/aic78xx 1489# ahd: Adaptec 29320/39320 Controllers. 1490# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) 1491# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, 1492# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F 1493# esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers 1494# including the AMD Am53C974 (found on devices such as the Tekram 1495# DC-390(T)) and the Sun ESP and FAS families of controllers 1496# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, 1497# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, 1498# ISP 12160 Ultra3 SCSI, 1499# Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters. 1500# Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters. 1501# Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters. 1502# ispfw: Firmware module for Qlogic host adapters 1503# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4 1504# or FC9x9 Fibre Channel host adapters. 1505# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters. 1506# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors: 1507# 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875, 1508# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, 1509# 53C1010-33, 53C1010-66. 1510# trm: Tekram DC395U/UW/F DC315U adapters. 1511# wds: WD7000 1512 1513# 1514# Note that the order is important in order for Buslogic ISA/EISA cards to be 1515# probed correctly. 1516# 1517device bt 1518hint.bt.0.at="isa" 1519hint.bt.0.port="0x330" 1520device adv 1521hint.adv.0.at="isa" 1522device adw 1523device aha 1524hint.aha.0.at="isa" 1525device aic 1526hint.aic.0.at="isa" 1527device ahb 1528device ahc 1529device ahd 1530device esp 1531device iscsi_initiator 1532device isp 1533hint.isp.0.disable="1" 1534hint.isp.0.role="3" 1535hint.isp.0.prefer_iomap="1" 1536hint.isp.0.prefer_memmap="1" 1537hint.isp.0.fwload_disable="1" 1538hint.isp.0.ignore_nvram="1" 1539hint.isp.0.fullduplex="1" 1540hint.isp.0.topology="lport" 1541hint.isp.0.topology="nport" 1542hint.isp.0.topology="lport-only" 1543hint.isp.0.topology="nport-only" 1544# we can't get u_int64_t types, nor can we get strings if it's got 1545# a leading 0x, hence this silly dodge. 1546hint.isp.0.portwnn="w50000000aaaa0000" 1547hint.isp.0.nodewnn="w50000000aaaa0001" 1548device ispfw 1549device mpt 1550device ncr 1551device sym 1552device trm 1553device wds 1554hint.wds.0.at="isa" 1555hint.wds.0.port="0x350" 1556hint.wds.0.irq="11" 1557hint.wds.0.drq="6" 1558 1559# The aic7xxx driver will attempt to use memory mapped I/O for all PCI 1560# controllers that have it configured only if this option is set. Unfortunately, 1561# this doesn't work on some motherboards, which prevents it from being the 1562# default. 1563options AHC_ALLOW_MEMIO 1564 1565# Dump the contents of the ahc controller configuration PROM. 1566options AHC_DUMP_EEPROM 1567 1568# Bitmap of units to enable targetmode operations. 1569options AHC_TMODE_ENABLE 1570 1571# Compile in Aic7xxx Debugging code. 1572options AHC_DEBUG 1573 1574# Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h 1575options AHC_DEBUG_OPTS 1576 1577# Print register bitfields in debug output. Adds ~128k to driver 1578# See ahc(4). 1579options AHC_REG_PRETTY_PRINT 1580 1581# Compile in aic79xx debugging code. 1582options AHD_DEBUG 1583 1584# Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4). 1585options AHD_DEBUG_OPTS=0xFFFFFFFF 1586 1587# Print human-readable register definitions when debugging 1588options AHD_REG_PRETTY_PRINT 1589 1590# Bitmap of units to enable targetmode operations. 1591options AHD_TMODE_ENABLE 1592 1593# The adw driver will attempt to use memory mapped I/O for all PCI 1594# controllers that have it configured only if this option is set. 1595options ADW_ALLOW_MEMIO 1596 1597# Options used in dev/iscsi (Software iSCSI stack) 1598# 1599options ISCSI_INITIATOR_DEBUG=9 1600 1601# Options used in dev/isp/ (Qlogic SCSI/FC driver). 1602# 1603# ISP_TARGET_MODE - enable target mode operation 1604# 1605options ISP_TARGET_MODE=1 1606# 1607# ISP_DEFAULT_ROLES - default role 1608# none=0 1609# target=1 1610# initiator=2 1611# both=3 (not supported currently) 1612# 1613# ISP_INTERNAL_TARGET (trivial internal disk target, for testing) 1614# 1615options ISP_DEFAULT_ROLES=0 1616 1617# Options used in dev/sym/ (Symbios SCSI driver). 1618#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits) 1619 # Allows the ncr to take precedence 1620 # 1 (1<<0) -> 810a, 860 1621 # 2 (1<<1) -> 825a, 875, 885, 895 1622 # 4 (1<<2) -> 895a, 896, 1510d 1623#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885 1624 # disabled:0 (default), enabled:1 1625#options SYM_SETUP_PCI_PARITY #-PCI parity checking 1626 # disabled:0, enabled:1 (default) 1627#options SYM_SETUP_MAX_LUN #-Number of LUNs supported 1628 # default:8, range:[1..64] 1629 1630# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). 1631# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. 1632# The DPT controllers are commonly re-licensed under other brand-names - 1633# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and 1634# Compaq are actually DPT controllers. 1635# 1636# See src/sys/dev/dpt for debugging and other subtle options. 1637# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various 1638# instruments are enabled. The tools in 1639# /usr/sbin/dpt_* assume these to be enabled. 1640# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h 1641# DPT_RESET_HBA Make "reset" actually reset the controller 1642# instead of fudging it. Only enable this if you 1643# are 100% certain you need it. 1644 1645device dpt 1646 1647# DPT options 1648#!CAM# options DPT_MEASURE_PERFORMANCE 1649options DPT_RESET_HBA 1650 1651# 1652# Compaq "CISS" RAID controllers (SmartRAID 5* series) 1653# These controllers have a SCSI-like interface, and require the 1654# CAM infrastructure. 1655# 1656device ciss 1657 1658# 1659# Intel Integrated RAID controllers. 1660# This driver was developed and is maintained by Intel. Contacts 1661# at Intel for this driver are 1662# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and 1663# "Leubner, Achim" <achim.leubner@intel.com>. 1664# 1665device iir 1666 1667# 1668# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later 1669# firmware. These controllers have a SCSI-like interface, and require 1670# the CAM infrastructure. 1671# 1672device mly 1673 1674# 1675# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only 1676# one entry is needed; the code will find and configure all supported 1677# controllers. 1678# 1679device ida # Compaq Smart RAID 1680device mlx # Mylex DAC960 1681device amr # AMI MegaRAID 1682device amrp # SCSI Passthrough interface (optional, CAM req.) 1683device mfi # LSI MegaRAID SAS 1684device mfip # LSI MegaRAID SAS passthrough, requires CAM 1685options MFI_DEBUG 1686device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s 1687 1688# 1689# 3ware ATA RAID 1690# 1691device twe # 3ware ATA RAID 1692 1693# 1694# Serial ATA host controllers: 1695# 1696# ahci: Advanced Host Controller Interface (AHCI) compatible 1697# mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers 1698# siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers 1699# 1700# These drivers are part of cam(4) subsystem. They supersede less featured 1701# ata(4) subsystem drivers, supporting same hardware. 1702 1703device ahci 1704device mvs 1705device siis 1706 1707# 1708# The 'ATA' driver supports all legacy ATA/ATAPI controllers, including 1709# PC Card devices. You only need one "device ata" for it to find all 1710# PCI and PC Card ATA/ATAPI devices on modern machines. 1711# Alternatively, individual bus and chipset drivers may be chosen by using 1712# the 'atacore' driver then selecting the drivers on a per vendor basis. 1713# For example to build a system which only supports a VIA chipset, 1714# omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers. 1715device ata 1716 1717# Modular ATA 1718#device atacore # Core ATA functionality 1719#device atacard # CARDBUS support 1720#device atabus # PC98 cbus support 1721#device ataisa # ISA bus support 1722#device atapci # PCI bus support; only generic chipset support 1723 1724# PCI ATA chipsets 1725#device ataacard # ACARD 1726#device ataacerlabs # Acer Labs Inc. (ALI) 1727#device ataamd # American Micro Devices (AMD) 1728#device ataati # ATI 1729#device atacenatek # Cenatek 1730#device atacypress # Cypress 1731#device atacyrix # Cyrix 1732#device atahighpoint # HighPoint 1733#device ataintel # Intel 1734#device ataite # Integrated Technology Inc. (ITE) 1735#device atajmicron # JMicron 1736#device atamarvell # Marvell 1737#device atamicron # Micron 1738#device atanational # National 1739#device atanetcell # NetCell 1740#device atanvidia # nVidia 1741#device atapromise # Promise 1742#device ataserverworks # ServerWorks 1743#device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD) 1744#device atasis # Silicon Integrated Systems Corp.(SiS) 1745#device atavia # VIA Technologies Inc. 1746 1747# 1748# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add: 1749hint.ata.0.at="isa" 1750hint.ata.0.port="0x1f0" 1751hint.ata.0.irq="14" 1752hint.ata.1.at="isa" 1753hint.ata.1.port="0x170" 1754hint.ata.1.irq="15" 1755 1756# 1757# The following options are valid on the ATA driver: 1758# 1759# ATA_STATIC_ID: controller numbering is static ie depends on location 1760# else the device numbers are dynamically allocated. 1761# ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request 1762# before timing out. 1763 1764options ATA_STATIC_ID 1765#options ATA_REQUEST_TIMEOUT=10 1766 1767# 1768# Standard floppy disk controllers and floppy tapes, supports 1769# the Y-E DATA External FDD (PC Card) 1770# 1771device fdc 1772hint.fdc.0.at="isa" 1773hint.fdc.0.port="0x3F0" 1774hint.fdc.0.irq="6" 1775hint.fdc.0.drq="2" 1776# 1777# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you 1778# gotta turn it actually on by setting the variable fd_debug with DDB, 1779# however. 1780options FDC_DEBUG 1781# 1782# Activate this line if you happen to have an Insight floppy tape. 1783# Probing them proved to be dangerous for people with floppy disks only, 1784# so it's "hidden" behind a flag: 1785#hint.fdc.0.flags="1" 1786 1787# Specify floppy devices 1788hint.fd.0.at="fdc0" 1789hint.fd.0.drive="0" 1790hint.fd.1.at="fdc0" 1791hint.fd.1.drive="1" 1792 1793# 1794# uart: newbusified driver for serial interfaces. It consolidates the sio(4), 1795# sab(4) and zs(4) drivers. 1796# 1797device uart 1798 1799# Options for uart(4) 1800options UART_PPS_ON_CTS # Do time pulse capturing using CTS 1801 # instead of DCD. 1802options UART_POLL_FREQ # Set polling rate, used when hw has 1803 # no interrupt support (50 Hz default). 1804 1805# The following hint should only be used for pure ISA devices. It is not 1806# needed otherwise. Use of hints is strongly discouraged. 1807hint.uart.0.at="isa" 1808 1809# The following 3 hints are used when the UART is a system device (i.e., a 1810# console or debug port), but only on platforms that don't have any other 1811# means to pass the information to the kernel. The unit number of the hint 1812# is only used to bundle the hints together. There is no relation to the 1813# unit number of the probed UART. 1814hint.uart.0.port="0x3f8" 1815hint.uart.0.flags="0x10" 1816hint.uart.0.baud="115200" 1817 1818# `flags' for serial drivers that support consoles like sio(4) and uart(4): 1819# 0x10 enable console support for this unit. Other console flags 1820# (if applicable) are ignored unless this is set. Enabling 1821# console support does not make the unit the preferred console. 1822# Boot with -h or set boot_serial=YES in the loader. For sio(4) 1823# specifically, the 0x20 flag can also be set (see above). 1824# Currently, at most one unit can have console support; the 1825# first one (in config file order) with this flag set is 1826# preferred. Setting this flag for sio0 gives the old behavior. 1827# 0x80 use this port for serial line gdb support in ddb. Also known 1828# as debug port. 1829# 1830 1831# Options for serial drivers that support consoles: 1832options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to 1833 # ddb, if available. 1834 1835# Solaris implements a new BREAK which is initiated by a character 1836# sequence CR ~ ^b which is similar to a familiar pattern used on 1837# Sun servers by the Remote Console. There are FreeBSD extensions: 1838# CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot. 1839options ALT_BREAK_TO_DEBUGGER 1840 1841# Serial Communications Controller 1842# Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel 1843# communications controllers. 1844device scc 1845 1846# PCI Universal Communications driver 1847# Supports various multi port PCI I/O cards. 1848device puc 1849 1850# 1851# Network interfaces: 1852# 1853# MII bus support is required for many PCI Ethernet NICs, 1854# namely those which use MII-compliant transceivers or implement 1855# transceiver control interfaces that operate like an MII. Adding 1856# "device miibus" to the kernel config pulls in support for the generic 1857# miibus API, the common support for for bit-bang'ing the MII and all 1858# of the PHY drivers, including a generic one for PHYs that aren't 1859# specifically handled by an individual driver. Support for specific 1860# PHYs may be built by adding "device mii", "device mii_bitbang" if 1861# needed by the NIC driver and then adding the appropriate PHY driver. 1862device mii # Minimal MII support 1863device mii_bitbang # Common module for bit-bang'ing the MII 1864device miibus # MII support w/ bit-bang'ing and all PHYs 1865 1866device acphy # Altima Communications AC101 1867device amphy # AMD AM79c873 / Davicom DM910{1,2} 1868device atphy # Attansic/Atheros F1 1869device axphy # Asix Semiconductor AX88x9x 1870device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C 1871device brgphy # Broadcom BCM54xx/57xx 1000baseTX 1872device ciphy # Cicada/Vitesse CS/VSC8xxx 1873device e1000phy # Marvell 88E1000 1000/100/10-BT 1874device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces 1875device icsphy # ICS ICS1889-1893 1876device ip1000phy # IC Plus IP1000A/IP1001 1877device jmphy # JMicron JMP211/JMP202 1878device lxtphy # Level One LXT-970 1879device mlphy # Micro Linear 6692 1880device nsgphy # NatSemi DP8361/DP83865/DP83891 1881device nsphy # NatSemi DP83840A 1882device nsphyter # NatSemi DP83843/DP83815 1883device pnaphy # HomePNA 1884device qsphy # Quality Semiconductor QS6612 1885device rdcphy # RDC Semiconductor R6040 1886device rgephy # RealTek 8169S/8110S/8211B/8211C 1887device rlphy # RealTek 8139 1888device rlswitch # RealTek 8305 1889device smcphy # SMSC LAN91C111 1890device tdkphy # TDK 89Q2120 1891device tlphy # Texas Instruments ThunderLAN 1892device truephy # LSI TruePHY 1893device xmphy # XaQti XMAC II 1894 1895# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA, 1896# PCI and ISA varieties. 1897# ae: Support for gigabit ethernet adapters based on the Attansic/Atheros 1898# L2 PCI-Express FastEthernet controllers. 1899# age: Support for gigabit ethernet adapters based on the Attansic/Atheros 1900# L1 PCI express gigabit ethernet controllers. 1901# alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers. 1902# ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers. 1903# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) 1904# bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet 1905# adapters. 1906# bfe: Broadcom BCM4401 Ethernet adapter. 1907# bge: Support for gigabit ethernet adapters based on the Broadcom 1908# BCM570x family of controllers, including the 3Com 3c996-T, 1909# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and 1910# the embedded gigE NICs on Dell PowerEdge 2550 servers. 1911# bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet 1912# adapters. 1913# bwi: Broadcom BCM430* and BCM431* family of wireless adapters. 1914# bwn: Broadcom BCM43xx family of wireless adapters. 1915# cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn 1916# cm: Arcnet SMC COM90c26 / SMC COM90c56 1917# (and SMC COM90c66 in '56 compatibility mode) adapters. 1918# cxgb: Chelsio T3 based 1GbE/10GbE PCIe Ethernet adapters. 1919# cxgbe:Chelsio T4 and T5 based 1GbE/10GbE/40GbE PCIe Ethernet adapters. 1920# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143 1921# and various workalikes including: 1922# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics 1923# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On 1924# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II 1925# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver 1926# replaces the old al, ax, dm, pn and mx drivers. List of brands: 1927# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110, 1928# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX, 1929# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204, 1930# KNE110TX. 1931# de: Digital Equipment DC21040 1932# em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters. 1933# igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters. 1934# ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589 1935# and PC Card devices using these chipsets. 1936# ex: Intel EtherExpress Pro/10 and other i82595-based adapters, 1937# Olicom Ethernet PC Card devices. 1938# fe: Fujitsu MB86960A/MB86965A Ethernet 1939# fea: DEC DEFEA EISA FDDI adapter 1940# fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed. 1941# fxp: Intel EtherExpress Pro/100B 1942# (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping) 1943# gem: Apple GMAC/Sun ERI/Sun GEM 1944# hme: Sun HME (Happy Meal Ethernet) 1945# jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters. 1946# le: AMD Am7900 LANCE and Am79C9xx PCnet 1947# lge: Support for PCI gigabit ethernet adapters based on the Level 1 1948# LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX, 1949# SMC TigerCard 1000 (SMC9462SX), and some Addtron cards. 1950# malo: Marvell Libertas wireless NICs. 1951# mwl: Marvell 88W8363 802.11n wireless NICs. 1952# Requires the mwl firmware module 1953# mwlfw: Marvell 88W8363 firmware 1954# msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect 1955# Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061, 1956# 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053, 1957# 88E8055, 88E8056 and D-Link 560T/550SX. 1958# lmc: Support for the LMC/SBE wide-area network interface cards. 1959# mlx5: Mellanox ConnectX-4 and ConnectX-4 LX IB and Eth shared code module. 1960# mlx5en:Mellanox ConnectX-4 and ConnectX-4 LX PCIe Ethernet adapters. 1961# my: Myson Fast Ethernet (MTD80X, MTD89X) 1962# nge: Support for PCI gigabit ethernet adapters based on the National 1963# Semiconductor DP83820 and DP83821 chipset. This includes the 1964# SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet 1965# GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom 1966# EP-320G-TX and the Netgear GA622T. 1967# oce: Emulex 10 Gbit adapters (OneConnect Ethernet) 1968# pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x 1969# PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home 1970# chipsets. These can also be handled by the le(4) driver if the 1971# pcn(4) driver is left out of the kernel. The le(4) driver does not 1972# support the additional features like the MII bus and burst mode of 1973# the PCnet-FAST and greater chipsets though. 1974# ral: Ralink Technology IEEE 802.11 wireless adapter 1975# re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter 1976# rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139 1977# chipset. Note that the RealTek driver defaults to using programmed 1978# I/O to do register accesses because memory mapped mode seems to cause 1979# severe lockups on SMP hardware. This driver also supports the 1980# Accton EN1207D `Cheetah' adapter, which uses a chip called 1981# the MPX 5030/5038, which is either a RealTek in disguise or a 1982# RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek 1983# chipset and is supported by this driver, not the 'vr' driver. 1984# sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the 1985# Adaptec AIC-6915 "starfire" controller. 1986# This includes dual and quad port cards, as well as one 100baseFX card. 1987# Most of these are 64-bit PCI devices, except for one single port 1988# card which is 32-bit. 1989# sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter 1990# sis: Support for NICs based on the Silicon Integrated Systems SiS 900, 1991# SiS 7016 and NS DP83815 PCI fast ethernet controller chips. 1992# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs. 1993# This includes the SK-9841 and SK-9842 single port cards (single mode 1994# and multimode fiber) and the SK-9843 and SK-9844 dual port cards 1995# (also single mode and multimode). 1996# The driver will autodetect the number of ports on the card and 1997# attach each one as a separate network interface. 1998# sn: Support for ISA and PC Card Ethernet devices using the 1999# SMC91C90/92/94/95 chips. 2000# ste: Sundance Technologies ST201 PCI fast ethernet controller, includes 2001# the D-Link DFE-550TX. 2002# stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack 2003# TC9021 family of controllers, including the Sundance ST2021/ST2023, 2004# the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101. 2005# ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks 2006# Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the 2007# 3Com 3c985, the Netgear GA620 and various others. Note that you will 2008# probably want to bump up kern.ipc.nmbclusters a lot to use this driver. 2009# tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN' 2010# cards and integrated ethernet controllers. This includes several 2011# Compaq Netelligent 10/100 cards and the built-in ethernet controllers 2012# in several Compaq Prosignia, Proliant and Deskpro systems. It also 2013# supports several Olicom 10Mbps and 10/100 boards. 2014# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) 2015# txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset 2016# vr: Support for various fast ethernet adapters based on the VIA 2017# Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, 2018# including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for 2019# DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320. 2020# vte: DM&P Vortex86 RDC R6040 Fast Ethernet 2021# vx: 3Com 3C590 and 3C595 2022# wb: Support for fast ethernet adapters based on the Winbond W89C840F chip. 2023# Note: this is not the same as the Winbond W89C940F, which is a 2024# NE2000 clone. 2025# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both 2026# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA 2027# bridge with a PCMCIA adapter plugged into it. 2028# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller, 2029# Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card, 2030# Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56 2031# xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast) 2032# Etherlink XL cards and integrated controllers. This includes the 2033# integrated 3c905B-TX chips in certain Dell Optiplex and Dell 2034# Precision desktop machines and the integrated 3c905-TX chips 2035# in Dell Latitude laptop docking stations. 2036# Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX 2037 2038# Order for ISA/EISA devices is important here 2039 2040device cm 2041hint.cm.0.at="isa" 2042hint.cm.0.port="0x2e0" 2043hint.cm.0.irq="9" 2044hint.cm.0.maddr="0xdc000" 2045device ep 2046device ex 2047device fe 2048hint.fe.0.at="isa" 2049hint.fe.0.port="0x300" 2050device fea 2051device sn 2052hint.sn.0.at="isa" 2053hint.sn.0.port="0x300" 2054hint.sn.0.irq="10" 2055device an 2056device wi 2057device xe 2058 2059# PCI Ethernet NICs that use the common MII bus controller code. 2060device ae # Attansic/Atheros L2 FastEthernet 2061device age # Attansic/Atheros L1 Gigabit Ethernet 2062device alc # Atheros AR8131/AR8132 Ethernet 2063device ale # Atheros AR8121/AR8113/AR8114 Ethernet 2064device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet 2065device bfe # Broadcom BCM440x 10/100 Ethernet 2066device bge # Broadcom BCM570xx Gigabit Ethernet 2067device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn 2068device cxgb # Chelsio T3 10 Gigabit Ethernet 2069device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware 2070device cxgbe # Chelsio T4 and T5 1GbE/10GbE/40GbE 2071device dc # DEC/Intel 21143 and various workalikes 2072device et # Agere ET1310 10/100/Gigabit Ethernet 2073device fxp # Intel EtherExpress PRO/100B (82557, 82558) 2074hint.fxp.0.prefer_iomap="0" 2075device gem # Apple GMAC/Sun ERI/Sun GEM 2076device hme # Sun HME (Happy Meal Ethernet) 2077device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet 2078device lge # Level 1 LXT1001 gigabit Ethernet 2079#device mlx5 # Shared code module between IB and Ethernet 2080#device mlx5en # Mellanox ConnectX-4 and ConnectX-4 LX 2081device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 2082device my # Myson Fast Ethernet (MTD80X, MTD89X) 2083device nge # NatSemi DP83820 gigabit Ethernet 2084device re # RealTek 8139C+/8169/8169S/8110S 2085device rl # RealTek 8129/8139 2086device pcn # AMD Am79C97x PCI 10/100 NICs 2087device sf # Adaptec AIC-6915 (``Starfire'') 2088device sge # Silicon Integrated Systems SiS190/191 2089device sis # Silicon Integrated Systems SiS 900/SiS 7016 2090device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet 2091device ste # Sundance ST201 (D-Link DFE-550TX) 2092device stge # Sundance/Tamarack TC9021 gigabit Ethernet 2093device tl # Texas Instruments ThunderLAN 2094device tx # SMC EtherPower II (83c170 ``EPIC'') 2095device vr # VIA Rhine, Rhine II 2096device vte # DM&P Vortex86 RDC R6040 Fast Ethernet 2097device wb # Winbond W89C840F 2098device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 2099 2100# PCI Ethernet NICs. 2101device de # DEC/Intel DC21x4x (``Tulip'') 2102device em # Intel Pro/1000 Gigabit Ethernet 2103device igb # Intel Pro/1000 PCIE Gigabit Ethernet 2104device ixgb # Intel Pro/10Gbe PCI-X Ethernet 2105device ix # Intel Pro/10Gbe PCIE Ethernet 2106device ixv # Intel Pro/10Gbe PCIE Ethernet VF 2107device le # AMD Am7900 LANCE and Am79C9xx PCnet 2108device mxge # Myricom Myri-10G 10GbE NIC 2109device nxge # Neterion Xframe 10GbE Server/Storage Adapter 2110device oce # Emulex 10 GbE (OneConnect Ethernet) 2111device ti # Alteon Networks Tigon I/II gigabit Ethernet 2112device txp # 3Com 3cR990 (``Typhoon'') 2113device vx # 3Com 3c590, 3c595 (``Vortex'') 2114device vxge # Exar/Neterion XFrame 3100 10GbE 2115 2116# PCI FDDI NICs. 2117device fpa 2118 2119# PCI WAN adapters. 2120device lmc 2121 2122# PCI IEEE 802.11 Wireless NICs 2123device ath # Atheros pci/cardbus NIC's 2124device ath_hal # pci/cardbus chip support 2125#device ath_ar5210 # AR5210 chips 2126#device ath_ar5211 # AR5211 chips 2127#device ath_ar5212 # AR5212 chips 2128#device ath_rf2413 2129#device ath_rf2417 2130#device ath_rf2425 2131#device ath_rf5111 2132#device ath_rf5112 2133#device ath_rf5413 2134#device ath_ar5416 # AR5416 chips 2135options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors 2136# All of the AR5212 parts have a problem when paired with the AR71xx 2137# CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx 2138# only. Details of the exact nature of the bug are sketchy, but some can be 2139# found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and 2140# 6. This option enables this workaround. There is a performance penalty 2141# for this work around, but without it things don't work at all. The DMA 2142# from the card usually bursts 128 bytes, but on the affected CPUs, only 2143# 4 are safe. 2144options AH_RXCFG_SDMAMW_4BYTES 2145#device ath_ar9160 # AR9160 chips 2146#device ath_ar9280 # AR9280 chips 2147#device ath_ar9285 # AR9285 chips 2148device ath_rate_sample # SampleRate tx rate control for ath 2149device bwi # Broadcom BCM430* BCM431* 2150device bwn # Broadcom BCM43xx 2151device malo # Marvell Libertas wireless NICs. 2152device mwl # Marvell 88W8363 802.11n wireless NICs. 2153device mwlfw 2154device ral # Ralink Technology RT2500 wireless NICs. 2155 2156# Use sf_buf(9) interface for jumbo buffers on ti(4) controllers. 2157#options TI_SF_BUF_JUMBO 2158# Turn on the header splitting option for the ti(4) driver firmware. This 2159# only works for Tigon II chips, and has no effect for Tigon I chips. 2160# This option requires the TI_SF_BUF_JUMBO option above. 2161#options TI_JUMBO_HDRSPLIT 2162 2163# These two options allow manipulating the mbuf cluster size and mbuf size, 2164# respectively. Be very careful with NIC driver modules when changing 2165# these from their default values, because that can potentially cause a 2166# mismatch between the mbuf size assumed by the kernel and the mbuf size 2167# assumed by a module. The only driver that currently has the ability to 2168# detect a mismatch is ti(4). 2169options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB 2170options MSIZE=512 # mbuf size in bytes 2171 2172# 2173# ATM related options (Cranor version) 2174# (note: this driver cannot be used with the HARP ATM stack) 2175# 2176# The `en' device provides support for Efficient Networks (ENI) 2177# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0). 2178# 2179# The `hatm' device provides support for Fore/Marconi HE155 and HE622 2180# ATM PCI cards. 2181# 2182# The `fatm' device provides support for Fore PCA200E ATM PCI cards. 2183# 2184# The `patm' device provides support for IDT77252 based cards like 2185# ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards. 2186# 2187# atm device provides generic atm functions and is required for 2188# atm devices. 2189# NATM enables the netnatm protocol family that can be used to 2190# bypass TCP/IP. 2191# 2192# utopia provides the access to the ATM PHY chips and is required for en, 2193# hatm and fatm. 2194# 2195# the current driver supports only PVC operations (no atm-arp, no multicast). 2196# for more details, please read the original documents at 2197# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html 2198# 2199device atm 2200device en 2201device fatm #Fore PCA200E 2202device hatm #Fore/Marconi HE155/622 2203device patm #IDT77252 cards (ProATM and IDT) 2204device utopia #ATM PHY driver 2205options NATM #native ATM 2206 2207options LIBMBPOOL #needed by patm, iatm 2208 2209# 2210# Sound drivers 2211# 2212# sound: The generic sound driver. 2213# 2214 2215device sound 2216 2217# 2218# snd_*: Device-specific drivers. 2219# 2220# The flags of the device tell the device a bit more info about the 2221# device that normally is obtained through the PnP interface. 2222# bit 2..0 secondary DMA channel; 2223# bit 4 set if the board uses two dma channels; 2224# bit 15..8 board type, overrides autodetection; leave it 2225# zero if don't know what to put in (and you don't, 2226# since this is unsupported at the moment...). 2227# 2228# snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP. 2229# snd_als4000: Avance Logic ALS4000 PCI. 2230# snd_atiixp: ATI IXP 200/300/400 PCI. 2231# snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only 2232# for sparc64. 2233# snd_cmi: CMedia CMI8338/CMI8738 PCI. 2234# snd_cs4281: Crystal Semiconductor CS4281 PCI. 2235# snd_csa: Crystal Semiconductor CS461x/428x PCI. (except 2236# 4281) 2237# snd_ds1: Yamaha DS-1 PCI. 2238# snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI. 2239# snd_emu10kx: Creative SoundBlaster Live! and Audigy 2240# snd_envy24: VIA Envy24 and compatible, needs snd_spicds. 2241# snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds. 2242# snd_es137x: Ensoniq AudioPCI ES137x PCI. 2243# snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in 2244# conjunction with snd_sbc. 2245# snd_fm801: Forte Media FM801 PCI. 2246# snd_gusc: Gravis UltraSound ISA PnP/non-PnP. 2247# snd_hda: Intel High Definition Audio (Controller) and 2248# compatible. 2249# snd_hdspe: RME HDSPe AIO and RayDAT. 2250# snd_ich: Intel ICH AC'97 and some more audio controllers 2251# embedded in a chipset, for example nVidia 2252# nForce controllers. 2253# snd_maestro: ESS Technology Maestro-1/2x PCI. 2254# snd_maestro3: ESS Technology Maestro-3/Allegro PCI. 2255# snd_mss: Microsoft Sound System ISA PnP/non-PnP. 2256# snd_neomagic: Neomagic 256 AV/ZX PCI. 2257# snd_sb16: Creative SoundBlaster16, to be used in 2258# conjunction with snd_sbc. 2259# snd_sb8: Creative SoundBlaster (pre-16), to be used in 2260# conjunction with snd_sbc. 2261# snd_sbc: Creative SoundBlaster ISA PnP/non-PnP. 2262# Supports ESS and Avance ISA chips as well. 2263# snd_solo: ESS Solo-1x PCI. 2264# snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers. 2265# snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs 2266# M5451 PCI. 2267# snd_uaudio: USB audio. 2268# snd_via8233: VIA VT8233x PCI. 2269# snd_via82c686: VIA VT82C686A PCI. 2270# snd_vibes: S3 Sonicvibes PCI. 2271 2272device snd_ad1816 2273device snd_als4000 2274device snd_atiixp 2275#device snd_audiocs 2276device snd_cmi 2277device snd_cs4281 2278device snd_csa 2279device snd_ds1 2280device snd_emu10k1 2281device snd_emu10kx 2282device snd_envy24 2283device snd_envy24ht 2284device snd_es137x 2285device snd_ess 2286device snd_fm801 2287device snd_gusc 2288device snd_hda 2289device snd_hdspe 2290device snd_ich 2291device snd_maestro 2292device snd_maestro3 2293device snd_mss 2294device snd_neomagic 2295device snd_sb16 2296device snd_sb8 2297device snd_sbc 2298device snd_solo 2299device snd_spicds 2300device snd_t4dwave 2301device snd_uaudio 2302device snd_via8233 2303device snd_via82c686 2304device snd_vibes 2305 2306# For non-PnP sound cards: 2307hint.pcm.0.at="isa" 2308hint.pcm.0.irq="10" 2309hint.pcm.0.drq="1" 2310hint.pcm.0.flags="0x0" 2311hint.sbc.0.at="isa" 2312hint.sbc.0.port="0x220" 2313hint.sbc.0.irq="5" 2314hint.sbc.0.drq="1" 2315hint.sbc.0.flags="0x15" 2316hint.gusc.0.at="isa" 2317hint.gusc.0.port="0x220" 2318hint.gusc.0.irq="5" 2319hint.gusc.0.drq="1" 2320hint.gusc.0.flags="0x13" 2321 2322# 2323# Following options are intended for debugging/testing purposes: 2324# 2325# SND_DEBUG Enable extra debugging code that includes 2326# sanity checking and possible increase of 2327# verbosity. 2328# 2329# SND_DIAGNOSTIC Similar in a spirit of INVARIANTS/DIAGNOSTIC, 2330# zero tolerance against inconsistencies. 2331# 2332# SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled 2333# in. This options enable most feeder converters 2334# except for 8bit. WARNING: May bloat the kernel. 2335# 2336# SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well. 2337# 2338# SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic 2339# as much as possible (the default trying to 2340# avoid it). Possible slowdown. 2341# 2342# SND_PCM_64 (Only applicable for i386/32bit arch) 2343# Process 32bit samples through 64bit 2344# integer/arithmetic. Slight increase of dynamic 2345# range at a cost of possible slowdown. 2346# 2347# SND_OLDSTEREO Only 2 channels are allowed, effectively 2348# disabling multichannel processing. 2349# 2350options SND_DEBUG 2351options SND_DIAGNOSTIC 2352options SND_FEEDER_MULTIFORMAT 2353options SND_FEEDER_FULL_MULTIFORMAT 2354options SND_FEEDER_RATE_HP 2355options SND_PCM_64 2356options SND_OLDSTEREO 2357 2358# 2359# IEEE-488 hardware: 2360# pcii: PCIIA cards (uPD7210 based isa cards) 2361# tnt4882: National Instruments PCI-GPIB card. 2362 2363device pcii 2364hint.pcii.0.at="isa" 2365hint.pcii.0.port="0x2e1" 2366hint.pcii.0.irq="5" 2367hint.pcii.0.drq="1" 2368 2369device tnt4882 2370 2371# 2372# Miscellaneous hardware: 2373# 2374# scd: Sony CD-ROM using proprietary (non-ATAPI) interface 2375# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface 2376# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board 2377# joy: joystick (including IO DATA PCJOY PC Card joystick) 2378# cmx: OmniKey CardMan 4040 pccard smartcard reader 2379 2380# Mitsumi CD-ROM 2381device mcd 2382hint.mcd.0.at="isa" 2383hint.mcd.0.port="0x300" 2384# for the Sony CDU31/33A CDROM 2385device scd 2386hint.scd.0.at="isa" 2387hint.scd.0.port="0x230" 2388device joy # PnP aware, hints for non-PnP only 2389hint.joy.0.at="isa" 2390hint.joy.0.port="0x201" 2391device cmx 2392 2393# 2394# The 'bktr' device is a PCI video capture device using the Brooktree 2395# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a 2396# TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator, 2397# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo. 2398# 2399# options OVERRIDE_CARD=xxx 2400# options OVERRIDE_TUNER=xxx 2401# options OVERRIDE_MSP=1 2402# options OVERRIDE_DBX=1 2403# These options can be used to override the auto detection 2404# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h 2405# Using sysctl(8) run-time overrides on a per-card basis can be made 2406# 2407# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL 2408# or 2409# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC 2410# Specifies the default video capture mode. 2411# This is required for Dual Crystal (28&35MHz) boards where PAL is used 2412# to prevent hangs during initialization, e.g. VideoLogic Captivator PCI. 2413# 2414# options BKTR_USE_PLL 2415# This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz 2416# crystal, e.g. some new Bt878 cards. 2417# 2418# options BKTR_GPIO_ACCESS 2419# This enables IOCTLs which give user level access to the GPIO port. 2420# 2421# options BKTR_NO_MSP_RESET 2422# Prevents the MSP34xx reset. Good if you initialize the MSP in another OS first 2423# 2424# options BKTR_430_FX_MODE 2425# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode. 2426# 2427# options BKTR_SIS_VIA_MODE 2428# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is 2429# needed for some old SiS and VIA chipset motherboards. 2430# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset 2431# motherboards and motherboards with bad or incomplete PCI 2.1 support. 2432# As a rough guess, old = before 1998 2433# 2434# options BKTR_NEW_MSP34XX_DRIVER 2435# Use new, more complete initialization scheme for the msp34* soundchip. 2436# Should fix stereo autodetection if the old driver does only output 2437# mono sound. 2438 2439# 2440# options BKTR_USE_FREEBSD_SMBUS 2441# Compile with FreeBSD SMBus implementation 2442# 2443# Brooktree driver has been ported to the new I2C framework. Thus, 2444# you'll need to have the following 3 lines in the kernel config. 2445# device smbus 2446# device iicbus 2447# device iicbb 2448# device iicsmb 2449# The iic and smb devices are only needed if you want to control other 2450# I2C slaves connected to the external connector of some cards. 2451# 2452device bktr 2453 2454# 2455# PC Card/PCMCIA and Cardbus 2456# 2457# cbb: pci/cardbus bridge implementing YENTA interface 2458# pccard: pccard slots 2459# cardbus: cardbus slots 2460device cbb 2461device pccard 2462device cardbus 2463 2464# 2465# MMC/SD 2466# 2467# mmc MMC/SD bus 2468# mmcsd MMC/SD memory card 2469# sdhci Generic PCI SD Host Controller 2470# 2471device mmc 2472device mmcsd 2473device sdhci 2474 2475# 2476# SMB bus 2477# 2478# System Management Bus support is provided by the 'smbus' device. 2479# Access to the SMBus device is via the 'smb' device (/dev/smb*), 2480# which is a child of the 'smbus' device. 2481# 2482# Supported devices: 2483# smb standard I/O through /dev/smb* 2484# 2485# Supported SMB interfaces: 2486# iicsmb I2C to SMB bridge with any iicbus interface 2487# bktr brooktree848 I2C hardware interface 2488# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit 2489# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit 2490# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) 2491# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit 2492# amdpm AMD 756 Power Management Unit 2493# amdsmb AMD 8111 SMBus 2.0 Controller 2494# nfpm NVIDIA nForce Power Management Unit 2495# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller 2496# ismt Intel SMBus 2.0 controller chips (on Atom S1200, C2000) 2497# 2498device smbus # Bus support, required for smb below. 2499 2500device intpm 2501device alpm 2502device ichsmb 2503device viapm 2504device amdpm 2505device amdsmb 2506device nfpm 2507device nfsmb 2508device ismt 2509 2510device smb 2511 2512# 2513# I2C Bus 2514# 2515# Philips i2c bus support is provided by the `iicbus' device. 2516# 2517# Supported devices: 2518# ic i2c network interface 2519# iic i2c standard io 2520# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. 2521# iicoc simple polling driver for OpenCores I2C controller 2522# 2523# Supported interfaces: 2524# bktr brooktree848 I2C software interface 2525# 2526# Other: 2527# iicbb generic I2C bit-banging code (needed by lpbb, bktr) 2528# 2529device iicbus # Bus support, required for ic/iic/iicsmb below. 2530device iicbb 2531 2532device ic 2533device iic 2534device iicsmb # smb over i2c bridge 2535device iicoc # OpenCores I2C controller support 2536 2537# I2C peripheral devices 2538# 2539# ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC 2540# ds1374 Dallas Semiconductor DS1374 RTC 2541# ds1672 Dallas Semiconductor DS1672 RTC 2542# s35390a Seiko Instruments S-35390A RTC 2543# 2544device ds133x 2545device ds1374 2546device ds1672 2547device s35390a 2548 2549# Parallel-Port Bus 2550# 2551# Parallel port bus support is provided by the `ppbus' device. 2552# Multiple devices may be attached to the parallel port, devices 2553# are automatically probed and attached when found. 2554# 2555# Supported devices: 2556# vpo Iomega Zip Drive 2557# Requires SCSI disk support ('scbus' and 'da'), best 2558# performance is achieved with ports in EPP 1.9 mode. 2559# lpt Parallel Printer 2560# plip Parallel network interface 2561# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O 2562# pps Pulse per second Timing Interface 2563# lpbb Philips official parallel port I2C bit-banging interface 2564# pcfclock Parallel port clock driver. 2565# 2566# Supported interfaces: 2567# ppc ISA-bus parallel port interfaces. 2568# 2569 2570options PPC_PROBE_CHIPSET # Enable chipset specific detection 2571 # (see flags in ppc(4)) 2572options DEBUG_1284 # IEEE1284 signaling protocol debug 2573options PERIPH_1284 # Makes your computer act as an IEEE1284 2574 # compliant peripheral 2575options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices 2576options VP0_DEBUG # ZIP/ZIP+ debug 2577options LPT_DEBUG # Printer driver debug 2578options PPC_DEBUG # Parallel chipset level debug 2579options PLIP_DEBUG # Parallel network IP interface debug 2580options PCFCLOCK_VERBOSE # Verbose pcfclock driver 2581options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10) 2582 2583device ppc 2584hint.ppc.0.at="isa" 2585hint.ppc.0.irq="7" 2586device ppbus 2587device vpo 2588device lpt 2589device plip 2590device ppi 2591device pps 2592device lpbb 2593device pcfclock 2594 2595# Kernel BOOTP support 2596 2597options BOOTP # Use BOOTP to obtain IP address/hostname 2598 # Requires NFSCLIENT and NFS_ROOT 2599options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info 2600options BOOTP_NFSV3 # Use NFS v3 to NFS mount root 2601options BOOTP_COMPAT # Workaround for broken bootp daemons. 2602options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP 2603options BOOTP_BLOCKSIZE=8192 # Override NFS block size 2604 2605# 2606# Add software watchdog routines. 2607# 2608options SW_WATCHDOG 2609 2610# 2611# Add the software deadlock resolver thread. 2612# 2613options DEADLKRES 2614 2615# 2616# Disable swapping of stack pages. This option removes all 2617# code which actually performs swapping, so it's not possible to turn 2618# it back on at run-time. 2619# 2620# This is sometimes usable for systems which don't have any swap space 2621# (see also sysctls "vm.defer_swapspace_pageouts" and 2622# "vm.disable_swapspace_pageouts") 2623# 2624#options NO_SWAPPING 2625 2626# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers 2627# for sendfile(2) that are used to map file VM pages, and normally 2628# default to a quantity that is roughly 16*MAXUSERS+512. You would 2629# typically want about 4 of these for each simultaneous file send. 2630# 2631options NSFBUFS=1024 2632 2633# 2634# Enable extra debugging code for locks. This stores the filename and 2635# line of whatever acquired the lock in the lock itself, and changes a 2636# number of function calls to pass around the relevant data. This is 2637# not at all useful unless you are debugging lock code. Also note 2638# that it is likely to break e.g. fstat(1) unless you recompile your 2639# userland with -DDEBUG_LOCKS as well. 2640# 2641options DEBUG_LOCKS 2642 2643 2644##################################################################### 2645# USB support 2646# UHCI controller 2647device uhci 2648# OHCI controller 2649device ohci 2650# EHCI controller 2651device ehci 2652# XHCI controller 2653device xhci 2654# SL811 Controller 2655#device slhci 2656# General USB code (mandatory for USB) 2657device usb 2658# 2659# USB Double Bulk Pipe devices 2660device udbp 2661# USB Fm Radio 2662device ufm 2663# USB LED 2664device uled 2665# Human Interface Device (anything with buttons and dials) 2666device uhid 2667# USB keyboard 2668device ukbd 2669# USB printer 2670device ulpt 2671# USB mass storage driver (Requires scbus and da) 2672device umass 2673# USB mass storage driver for device-side mode 2674device usfs 2675# USB support for Belkin F5U109 and Magic Control Technology serial adapters 2676device umct 2677# USB modem support 2678device umodem 2679# USB mouse 2680device ums 2681# USB touchpad(s) 2682device atp 2683device wsp 2684# eGalax USB touch screen 2685device uep 2686# Diamond Rio 500 MP3 player 2687device urio 2688# 2689# USB serial support 2690device ucom 2691# USB support for 3G modem cards by Option, Novatel, Huawei and Sierra 2692device u3g 2693# USB support for Technologies ARK3116 based serial adapters 2694device uark 2695# USB support for Belkin F5U103 and compatible serial adapters 2696device ubsa 2697# USB support for serial adapters based on the FT8U100AX and FT8U232AM 2698device uftdi 2699# USB support for some Windows CE based serial communication. 2700device uipaq 2701# USB support for Prolific PL-2303 serial adapters 2702device uplcom 2703# USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters 2704device uslcom 2705# USB Visor and Palm devices 2706device uvisor 2707# USB serial support for DDI pocket's PHS 2708device uvscom 2709# 2710# USB ethernet support 2711device uether 2712# ADMtek USB ethernet. Supports the LinkSys USB100TX, 2713# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX 2714# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus 2715# eval board. 2716device aue 2717 2718# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the 2719# LinkSys USB200M and various other adapters. 2720device axe 2721# ASIX Electronics AX88178A/AX88179 USB 2.0/3.0 gigabit ethernet driver. 2722device axge 2723 2724# 2725# Devices which communicate using Ethernet over USB, particularly 2726# Communication Device Class (CDC) Ethernet specification. Supports 2727# Sharp Zaurus PDAs, some DOCSIS cable modems and so on. 2728device cdce 2729# 2730# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate 2731# and Netmate II, and the Belkin F5U111. 2732device cue 2733# 2734# Kawasaki LSI ethernet. Supports the LinkSys USB10T, 2735# Entrega USB-NET-E45, Peracom Ethernet Adapter, the 2736# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T, 2737# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB 2738# and 2104USB, and the Corega USB-T. 2739device kue 2740# 2741# RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX 2742# and the GREEN HOUSE GH-USB100B. 2743device rue 2744# 2745# Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC. 2746device udav 2747# 2748# Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030. 2749device mos 2750# 2751# HSxPA devices from Option N.V 2752device uhso 2753 2754# Realtek RTL8188SU/RTL8191SU/RTL8192SU wireless driver 2755device rsu 2756# 2757# Ralink Technology RT2501USB/RT2601USB wireless driver 2758device rum 2759# Ralink Technology RT2700U/RT2800U/RT3000U wireless driver 2760device run 2761# 2762# Atheros AR5523 wireless driver 2763device uath 2764# 2765# Conexant/Intersil PrismGT wireless driver 2766device upgt 2767# 2768# Ralink Technology RT2500USB wireless driver 2769device ural 2770# 2771# RNDIS USB ethernet driver 2772device urndis 2773# Realtek RTL8187B/L wireless driver 2774device urtw 2775# 2776# Realtek RTL8188CU/RTL8192CU wireless driver 2777device urtwn 2778# 2779# ZyDas ZD1211/ZD1211B wireless driver 2780device zyd 2781# 2782# Sierra USB wireless driver 2783device usie 2784 2785# 2786# debugging options for the USB subsystem 2787# 2788options USB_DEBUG 2789options U3G_DEBUG 2790 2791# options for ukbd: 2792options UKBD_DFLT_KEYMAP # specify the built-in keymap 2793makeoptions UKBD_DFLT_KEYMAP=it.iso 2794 2795# options for uplcom: 2796options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval 2797 # in milliseconds 2798 2799# options for uvscom: 2800options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size 2801options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval 2802 # in milliseconds 2803 2804##################################################################### 2805# FireWire support 2806 2807device firewire # FireWire bus code 2808device sbp # SCSI over Firewire (Requires scbus and da) 2809device sbp_targ # SBP-2 Target mode (Requires scbus and targ) 2810device fwe # Ethernet over FireWire (non-standard!) 2811device fwip # IP over FireWire (RFC2734 and RFC3146) 2812 2813##################################################################### 2814# dcons support (Dumb Console Device) 2815 2816device dcons # dumb console driver 2817device dcons_crom # FireWire attachment 2818options DCONS_BUF_SIZE=16384 # buffer size 2819options DCONS_POLL_HZ=100 # polling rate 2820options DCONS_FORCE_CONSOLE=0 # force to be the primary console 2821options DCONS_FORCE_GDB=1 # force to be the gdb device 2822 2823##################################################################### 2824# crypto subsystem 2825# 2826# This is a port of the OpenBSD crypto framework. Include this when 2827# configuring IPSEC and when you have a h/w crypto device to accelerate 2828# user applications that link to OpenSSL. 2829# 2830# Drivers are ports from OpenBSD with some simple enhancements that have 2831# been fed back to OpenBSD. 2832 2833device crypto # core crypto support 2834device cryptodev # /dev/crypto for access to h/w 2835 2836device rndtest # FIPS 140-2 entropy tester 2837 2838device hifn # Hifn 7951, 7781, etc. 2839options HIFN_DEBUG # enable debugging support: hw.hifn.debug 2840options HIFN_RNDTEST # enable rndtest support 2841 2842device ubsec # Broadcom 5501, 5601, 58xx 2843options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug 2844options UBSEC_RNDTEST # enable rndtest support 2845 2846##################################################################### 2847 2848 2849# 2850# Embedded system options: 2851# 2852# An embedded system might want to run something other than init. 2853options INIT_PATH=/sbin/init:/rescue/init 2854 2855# Debug options 2856options BUS_DEBUG # enable newbus debugging 2857options DEBUG_VFS_LOCKS # enable VFS lock debugging 2858options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking 2859 2860# 2861# Verbose SYSINIT 2862# 2863# Make the SYSINIT process performed by mi_startup() verbose. This is very 2864# useful when porting to a new architecture. If DDB is also enabled, this 2865# will print function names instead of addresses. 2866options VERBOSE_SYSINIT 2867 2868##################################################################### 2869# SYSV IPC KERNEL PARAMETERS 2870# 2871# Maximum number of System V semaphores that can be used on the system at 2872# one time. 2873options SEMMNI=11 2874 2875# Total number of semaphores system wide 2876options SEMMNS=61 2877 2878# Total number of undo structures in system 2879options SEMMNU=31 2880 2881# Maximum number of System V semaphores that can be used by a single process 2882# at one time. 2883options SEMMSL=61 2884 2885# Maximum number of operations that can be outstanding on a single System V 2886# semaphore at one time. 2887options SEMOPM=101 2888 2889# Maximum number of undo operations that can be outstanding on a single 2890# System V semaphore at one time. 2891options SEMUME=11 2892 2893# Maximum number of shared memory pages system wide. 2894options SHMALL=1025 2895 2896# Maximum size, in bytes, of a single System V shared memory region. 2897options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1) 2898options SHMMAXPGS=1025 2899 2900# Minimum size, in bytes, of a single System V shared memory region. 2901options SHMMIN=2 2902 2903# Maximum number of shared memory regions that can be used on the system 2904# at one time. 2905options SHMMNI=33 2906 2907# Maximum number of System V shared memory regions that can be attached to 2908# a single process at one time. 2909options SHMSEG=9 2910 2911# Compress user core dumps. 2912options COMPRESS_USER_CORES 2913# required to compress file output from kernel for COMPRESS_USER_CORES. 2914device gzio 2915 2916# Set the amount of time (in seconds) the system will wait before 2917# rebooting automatically when a kernel panic occurs. If set to (-1), 2918# the system will wait indefinitely until a key is pressed on the 2919# console. 2920options PANIC_REBOOT_WAIT_TIME=16 2921 2922# Attempt to bypass the buffer cache and put data directly into the 2923# userland buffer for read operation when O_DIRECT flag is set on the 2924# file. Both offset and length of the read operation must be 2925# multiples of the physical media sector size. 2926# 2927options DIRECTIO 2928 2929# Specify a lower limit for the number of swap I/O buffers. They are 2930# (among other things) used when bypassing the buffer cache due to 2931# DIRECTIO kernel option enabled and O_DIRECT flag set on file. 2932# 2933options NSWBUF_MIN=120 2934 2935##################################################################### 2936 2937# More undocumented options for linting. 2938# Note that documenting these is not considered an affront. 2939 2940options CAM_DEBUG_DELAY 2941 2942# VFS cluster debugging. 2943options CLUSTERDEBUG 2944 2945options DEBUG 2946 2947# Kernel filelock debugging. 2948options LOCKF_DEBUG 2949 2950# System V compatible message queues 2951# Please note that the values provided here are used to test kernel 2952# building. The defaults in the sources provide almost the same numbers. 2953# MSGSSZ must be a power of 2 between 8 and 1024. 2954options MSGMNB=2049 # Max number of chars in queue 2955options MSGMNI=41 # Max number of message queue identifiers 2956options MSGSEG=2049 # Max number of message segments 2957options MSGSSZ=16 # Size of a message segment 2958options MSGTQL=41 # Max number of messages in system 2959 2960options NBUF=512 # Number of buffer headers 2961 2962options SCSI_NCR_DEBUG 2963options SCSI_NCR_MAX_SYNC=10000 2964options SCSI_NCR_MAX_WIDE=1 2965options SCSI_NCR_MYADDR=7 2966 2967options SC_DEBUG_LEVEL=5 # Syscons debug level 2968options SC_RENDER_DEBUG # syscons rendering debugging 2969 2970options VFS_BIO_DEBUG # VFS buffer I/O debugging 2971 2972options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack 2973options KSTACK_USAGE_PROF 2974 2975# Adaptec Array Controller driver options 2976options AAC_DEBUG # Debugging levels: 2977 # 0 - quiet, only emit warnings 2978 # 1 - noisy, emit major function 2979 # points and things done 2980 # 2 - extremely noisy, emit trace 2981 # items in loops, etc. 2982 2983# Resource Accounting 2984options RACCT 2985 2986# Resource Limits 2987options RCTL 2988 2989# Yet more undocumented options for linting. 2990# BKTR_ALLOC_PAGES has no effect except to cause warnings, and 2991# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the 2992# driver still mostly spells this option BROOKTREE_ALLOC_PAGES. 2993##options BKTR_ALLOC_PAGES=(217*4+1) 2994options BROOKTREE_ALLOC_PAGES=(217*4+1) 2995options MAXFILES=999 2996 2997# Random number generator 2998options RANDOM_YARROW # Yarrow RNG 2999##options RANDOM_FORTUNA # Fortuna RNG - not yet implemented 3000options RANDOM_DEBUG # Debugging messages 3001options RANDOM_RWFILE # Read and write entropy cache 3002 3003# Intel em(4) driver 3004options EM_MULTIQUEUE # Activate multiqueue features/disable MSI-X 3005