ctl.h revision 268151
1/*-
2 * Copyright (c) 2003 Silicon Graphics International Corp.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions, and the following disclaimer,
10 *    without modification.
11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12 *    substantially similar to the "NO WARRANTY" disclaimer below
13 *    ("Disclaimer") and any redistribution must be conditioned upon
14 *    including a substantially similar Disclaimer requirement for further
15 *    binary redistribution.
16 *
17 * NO WARRANTY
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
21 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
22 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
27 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGES.
29 *
30 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl.h#5 $
31 * $FreeBSD: stable/10/sys/cam/ctl/ctl.h 268151 2014-07-02 10:45:31Z mav $
32 */
33/*
34 * Function definitions used both within CTL and potentially in various CTL
35 * clients.
36 *
37 * Author: Ken Merry <ken@FreeBSD.org>
38 */
39
40#ifndef	_CTL_H_
41#define	_CTL_H_
42
43#define	ctl_min(x,y)	(((x) < (y)) ? (x) : (y))
44#define	CTL_RETVAL_COMPLETE	0
45#define	CTL_RETVAL_QUEUED	1
46#define	CTL_RETVAL_ALLOCATED	2
47#define	CTL_RETVAL_ERROR	3
48
49typedef enum {
50	CTL_PORT_NONE		= 0x00,
51	CTL_PORT_FC		= 0x01,
52	CTL_PORT_SCSI		= 0x02,
53	CTL_PORT_IOCTL		= 0x04,
54	CTL_PORT_INTERNAL	= 0x08,
55	CTL_PORT_ISCSI		= 0x10,
56	CTL_PORT_ALL		= 0xff,
57	CTL_PORT_ISC		= 0x100 // FC port for inter-shelf communication
58} ctl_port_type;
59
60struct ctl_port_entry {
61	ctl_port_type		port_type;
62	char			port_name[64];
63	int32_t			targ_port;
64	int			physical_port;
65	int			virtual_port;
66	u_int			flags;
67#define	CTL_PORT_WWNN_VALID	0x01
68#define	CTL_PORT_WWPN_VALID	0x02
69	uint64_t		wwnn;
70	uint64_t		wwpn;
71	int			online;
72};
73
74struct ctl_modepage_header {
75	uint8_t page_code;
76	uint8_t subpage;
77	int32_t len_used;
78	int32_t len_left;
79};
80
81struct ctl_modepage_aps {
82	struct ctl_modepage_header header;
83	uint8_t lock_active;
84};
85
86union ctl_modepage_info {
87	struct ctl_modepage_header header;
88	struct ctl_modepage_aps aps;
89};
90
91/*
92 * Serial number length, for VPD page 0x80.
93 */
94#define	CTL_SN_LEN	16
95
96/*
97 * Device ID length, for VPD page 0x83.
98 */
99#define	CTL_DEVID_LEN	16
100/*
101 * WWPN length, for VPD page 0x83.
102 */
103#define CTL_WWPN_LEN   8
104
105/*
106 * Unit attention types. ASC/ASCQ values for these should be placed in
107 * ctl_build_ua.  These are also listed in order of reporting priority.
108 * i.e. a poweron UA is reported first, bus reset second, etc.
109 */
110typedef enum {
111	CTL_UA_NONE		= 0x0000,
112	CTL_UA_POWERON		= 0x0001,
113	CTL_UA_BUS_RESET	= 0x0002,
114	CTL_UA_TARG_RESET	= 0x0004,
115	CTL_UA_LUN_RESET	= 0x0008,
116	CTL_UA_LUN_CHANGE	= 0x0010,
117	CTL_UA_MODE_CHANGE	= 0x0020,
118	CTL_UA_LOG_CHANGE	= 0x0040,
119	CTL_UA_LVD		= 0x0080,
120	CTL_UA_SE		= 0x0100,
121	CTL_UA_RES_PREEMPT	= 0x0200,
122	CTL_UA_RES_RELEASE	= 0x0400,
123	CTL_UA_REG_PREEMPT  	= 0x0800,
124	CTL_UA_ASYM_ACC_CHANGE  = 0x1000,
125	CTL_UA_CAPACITY_CHANGED = 0x2000
126} ctl_ua_type;
127
128#ifdef	_KERNEL
129
130MALLOC_DECLARE(M_CTL);
131
132typedef enum {
133	CTL_THREAD_NONE		= 0x00,
134	CTL_THREAD_WAKEUP	= 0x01
135} ctl_thread_flags;
136
137struct ctl_thread {
138	void			(*thread_func)(void *arg);
139	void			*arg;
140	struct cv		wait_queue;
141	const char		*thread_name;
142	ctl_thread_flags	thread_flags;
143	struct completion	*thread_event;
144	struct task_struct	*task;
145};
146
147struct ctl_page_index;
148
149#ifdef SYSCTL_DECL	/* from sysctl.h */
150SYSCTL_DECL(_kern_cam_ctl);
151#endif
152
153/*
154 * Call these routines to enable or disable front end ports.
155 */
156int ctl_port_enable(ctl_port_type port_type);
157int ctl_port_disable(ctl_port_type port_type);
158/*
159 * This routine grabs a list of frontend ports.
160 */
161int ctl_port_list(struct ctl_port_entry *entries, int num_entries_alloced,
162		  int *num_entries_filled, int *num_entries_dropped,
163		  ctl_port_type port_type, int no_virtual);
164
165/*
166 * Put a string into an sbuf, escaping characters that are illegal or not
167 * recommended in XML.  Note this doesn't escape everything, just > < and &.
168 */
169int ctl_sbuf_printf_esc(struct sbuf *sb, char *str);
170
171int ctl_ffz(uint32_t *mask, uint32_t size);
172int ctl_set_mask(uint32_t *mask, uint32_t bit);
173int ctl_clear_mask(uint32_t *mask, uint32_t bit);
174int ctl_is_set(uint32_t *mask, uint32_t bit);
175int ctl_control_page_handler(struct ctl_scsiio *ctsio,
176			     struct ctl_page_index *page_index,
177			     uint8_t *page_ptr);
178/**
179int ctl_failover_sp_handler(struct ctl_scsiio *ctsio,
180			    struct ctl_page_index *page_index,
181			    uint8_t *page_ptr);
182**/
183int ctl_power_sp_handler(struct ctl_scsiio *ctsio,
184			 struct ctl_page_index *page_index, uint8_t *page_ptr);
185int ctl_power_sp_sense_handler(struct ctl_scsiio *ctsio,
186			       struct ctl_page_index *page_index, int pc);
187int ctl_aps_sp_handler(struct ctl_scsiio *ctsio,
188		       struct ctl_page_index *page_index, uint8_t *page_ptr);
189int ctl_debugconf_sp_sense_handler(struct ctl_scsiio *ctsio,
190				   struct ctl_page_index *page_index,
191				   int pc);
192int ctl_debugconf_sp_select_handler(struct ctl_scsiio *ctsio,
193				    struct ctl_page_index *page_index,
194				    uint8_t *page_ptr);
195int ctl_config_move_done(union ctl_io *io);
196void ctl_datamove(union ctl_io *io);
197void ctl_done(union ctl_io *io);
198void ctl_data_submit_done(union ctl_io *io);
199void ctl_config_write_done(union ctl_io *io);
200#if 0
201int ctl_thread(void *arg);
202#endif
203void ctl_wakeup_thread(void);
204#if 0
205struct ctl_thread *ctl_create_thread(void (*thread_func)
206	(void *thread_arg), void *thread_arg, const char *thread_name);
207void ctl_signal_thread(struct ctl_thread *thread);
208void ctl_shutdown_thread(struct ctl_thread *thread);
209#endif
210void ctl_portDB_changed(int portnum);
211void ctl_init_isc_msg(void);
212
213#endif	/* _KERNEL */
214
215#endif	/* _CTL_H_ */
216
217/*
218 * vim: ts=8
219 */
220