cubieboard.dts revision 266274 
1/*-
2 * Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@gmail.com>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 * 
26 * $FreeBSD: stable/10/sys/boot/fdt/dts/arm/cubieboard.dts 266274 2014-05-16 23:27:18Z ian $
27 */
28
29/dts-v1/;
30
31/ {
32	model = "Cubietech Cubieboard";
33	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
34	#address-cells = <1>;
35	#size-cells = <1>;
36
37	interrupt-parent = <&AINTC>;
38
39	memory {
40		device_type = "memory";
41		reg = < 0x40000000 0x40000000 >;	/* 1GB RAM */
42	};
43
44	aliases {
45		soc = &SOC;
46		UART0 = &UART0;
47	};
48
49	SOC: a10 {
50		#address-cells = <1>;
51		#size-cells = <1>;
52		compatible = "simple-bus";
53		ranges;
54		bus-frequency = <0>;
55
56		AINTC: interrupt-controller@01c20400 {
57			compatible = "allwinner,sun4i-ic";
58			interrupt-controller;
59			#address-cells = <0>;
60			#interrupt-cells = <1>;
61			reg =   < 0x01c20400 0x400 >;
62		};
63
64		sramc@01c00000 {
65			compatible = "allwinner,sun4i-sramc";
66			#address-cells = <1>;
67			#size-cells = <1>;
68			reg = < 0x01c00000 0x1000 >;
69		};
70
71		ccm@01c20000 {
72			compatible = "allwinner,sun4i-ccm";
73			#address-cells = <1>;
74			#size-cells = <1>;
75			reg = < 0x01c20000 0x400 >;
76		};
77
78		timer@01c20c00 {
79			compatible = "allwinner,sun4i-timer";
80			reg = <0x01c20c00 0x90>;
81			interrupts = < 22 >;
82			interrupt-parent = <&AINTC>;
83			clock-frequency = < 24000000 >;
84		};
85
86		watchdog@01c20c90 {
87			compatible = "allwinner,sun4i-wdt";
88			reg = <0x01c20c90 0x08>;
89		};
90
91
92		GPIO: gpio@01c20800 {
93			#gpio-cells = <3>;
94			compatible = "allwinner,sun4i-gpio";
95			gpio-controller;
96			reg =<  0x01c20800 0x400 >;
97			interrupts = < 28 >;
98			interrupt-parent = <&AINTC>;
99		};
100
101		usb1: usb@01c14000 {
102			compatible = "allwinner,usb-ehci", "usb-ehci";
103			reg = <0x01c14000 0x1000>;
104			interrupts = < 39 >;
105			interrupt-parent = <&AINTC>;
106		};
107
108		usb2: usb@01c1c000 {
109			compatible = "allwinner,usb-ehci", "usb-ehci";
110			reg = <0x01c1c000 0x1000>;
111			interrupts = < 40 >;
112			interrupt-parent = <&AINTC>;
113		};
114
115		sata@01c18000 {
116			compatible = "allwinner,ahci";
117			reg = <0x01c18000 0x1000>;
118			interrupts = <56>;
119			interrupt-parent = <&AINTC>;
120		};
121
122		UART0: serial@01c28000 {
123			status = "okay";
124			compatible = "ns16550";
125			reg = <0x01c28000 0x400>;
126			reg-shift = <2>;
127			interrupts = <1>;
128			interrupt-parent = <&AINTC>;
129			current-speed = <115200>;
130			clock-frequency = < 24000000 >;
131			busy-detect = <1>;
132			broken-txfifo = <1>;
133		};
134
135		emac@01c0b000 {
136			compatible = "allwinner,sun4i-emac";
137			reg = <0x01c0b000 0x1000>;
138			interrupts = <55>;
139			interrupt-parent = <&AINTC>;
140		};
141	};
142
143	chosen {
144		bootargs = "-v";
145		stdin = "UART0";
146		stdout = "UART0";
147	};
148};
149
150