IMX6 revision 271746
1# Kernel configuration for Freescale i.MX6 systems.
2#
3# For more information on this file, please read the config(5) manual page,
4# and/or the handbook section on Kernel Configuration Files:
5#
6#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
7#
8# The handbook is also available locally in /usr/share/doc/handbook
9# if you've installed the doc distribution, otherwise always see the
10# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
11# latest information.
12#
13# An exhaustive list of options and more detailed explanations of the
14# device lines is also present in the ../../conf/NOTES and NOTES files.
15# If you are in doubt as to the purpose or necessity of a line, check first
16# in NOTES.
17#
18# $FreeBSD: stable/10/sys/arm/conf/IMX6 271746 2014-09-18 08:58:22Z tuexen $
19
20ident		IMX6
21include 	"../freescale/imx/std.imx6"
22
23options  	HZ=500			# Scheduling quantum is 2 milliseconds.
24options  	SCHED_ULE		# ULE scheduler
25options  	PREEMPTION		# Enable kernel thread preemption
26options  	INET			# InterNETworking
27options  	INET6			# IPv6 communications protocols
28options  	SCTP			# Stream Control Transmission Protocol
29options  	FFS			# Berkeley Fast Filesystem
30options  	SOFTUPDATES		# Enable FFS soft updates support
31options  	UFS_ACL			# Support for access control lists
32options  	UFS_DIRHASH		# Improve performance on big directories
33options  	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
34#options  	MD_ROOT			# MD is a potential root device
35options  	NFSCL			# New Network Filesystem Client
36#options  	NFSD			# New Network Filesystem Server
37options  	NFSLOCKD		# Network Lock Manager
38options  	NFS_ROOT		# NFS usable as /, requires NFSCL
39options 	TMPFS			# Efficient memory filesystem
40options  	MSDOSFS			# MSDOS Filesystem
41options  	CD9660			# ISO 9660 Filesystem
42#options  	PROCFS			# Process filesystem (requires PSEUDOFS)
43options  	PSEUDOFS		# Pseudo-filesystem framework
44options 	GEOM_PART_BSD		# BSD partition scheme
45options 	GEOM_PART_MBR		# MBR partition scheme
46options  	GEOM_PART_GPT		# GUID Partition Tables.
47options  	GEOM_LABEL		# Provides labelization
48options  	KTRACE			# ktrace(1) support
49options  	SYSVSHM			# SYSV-style shared memory
50options  	SYSVMSG			# SYSV-style message queues
51options  	SYSVSEM			# SYSV-style semaphores
52options  	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
53options  	INCLUDE_CONFIG_FILE	# Include this file in kernel
54
55# Debugging support.  Always need this:
56options  	KDB			# Enable kernel debugger support.
57# For minimum debugger support use KDB_TRACE, for interactive use DDB.
58#options  	KDB_TRACE		# Print a stack trace for a panic.
59options  	DDB			# Support DDB.
60# For full debugger support use this instead:
61#options  	GDB			# Support remote GDB.
62# Other debugging options...
63makeoptions  	DEBUG=-g		# Build kernel with gdb(1) debug symbols
64options  	ALT_BREAK_TO_DEBUGGER	# Use <CR><tilde><ctrl-b> to enter debugger.
65#options  	DEBUG
66#options  	DEADLKRES		# Enable the deadlock resolver
67#options  	INVARIANTS		# Enable calls of extra sanity checking
68#options  	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
69#options  	WITNESS			# Enable checks to detect deadlocks and cycles
70
71# Pseudo devices.
72device  	loop			# Network loopback
73device  	random			# Entropy device
74device  	vlan			# 802.1Q VLAN support
75device  	tun			# Packet tunnel.
76device  	md			# Memory "disks"
77#device  	gif			# IPv6 and IPv4 tunneling
78#device  	faith			# IPv6-to-IPv4 relaying (translation)
79#device  	firmware		# firmware assist module
80device  	ether			# Ethernet support
81device  	miibus			# Required for ethernet
82device  	bpf			# Berkeley packet filter (required for DHCP)
83#device  	iomux			# IO Multiplexor
84
85# Serial (COM) ports
86device  	uart			# Multi-uart driver
87
88# SDCard
89device  	sdhci			# SD controller
90device  	mmc			# SD/MMC protocol
91device  	mmcsd			# SDCard disk device
92
93# SCSI peripherals
94device  	scbus			# SCSI bus (required for SCSI)
95device  	da			# Direct Access (disks)
96device  	cd			# CD
97device  	pass			# Passthrough device (direct SCSI access)
98
99# USB support
100#options  	USB_DEBUG		# enable debug msgs
101device  	ehci			# OHCI USB interface
102device  	usb			# USB Bus (required)
103device  	umass			# Disks/Mass storage - Requires scbus and da
104device  	uhid			# "Human Interface Devices"
105device  	u3g			# USB modems
106#device  	ukbd			# Allow keyboard like HIDs to control console
107#device  	ums			# USB mouse
108
109# USB Ethernet, requires miibus 	
110#device  	aue			# ADMtek USB Ethernet
111#device  	axe			# ASIX Electronics USB Ethernet
112#device  	cdce			# Generic USB over Ethernet
113#device  	cue			# CATC USB Ethernet
114#device  	kue			# Kawasaki LSI USB Ethernet
115#device  	rue			# RealTek RTL8150 USB Ethernet
116#device  	udav			# Davicom DM9601E USB
117
118# USB Wireless
119#device  	rum			# Ralink Technology RT2501USB wireless NICs
120
121# Wireless NIC cards
122#device  	wlan			# 802.11 support
123#device  	wlan_wep		# 802.11 WEP support
124#device  	wlan_ccmp		# 802.11 CCMP support
125#device  	wlan_tkip		# 802.11 TKIP support
126#device  	wlan_amrr		# AMRR transmit rate control algorithm
127
128# NOTE: serial console will be disabled if syscons enabled
129# Uncomment following lines for framebuffer/syscons support
130# Wandboard has no video console support yet.
131#device  	sc
132#device  	kbdmux
133#options  	SC_DFLT_FONT		# compile font in
134#makeoptions  	SC_DFLT_FONT=cp437
135
136# required for netbooting
137#options  	BOOTP
138#options  	BOOTP_COMPAT
139#options  	BOOTP_NFSROOT
140#options  	BOOTP_NFSV3
141#options  	BOOTP_WIRED_TO=ffec0
142
143# U-Boot stuff lives on slice 1, FreeBSD on slice 2.
144options  	ROOTDEVNAME=\"ufs:mmcsd0s2a\"
145
146# ARM and SoC-specific options
147options  	FDT			# Configure using FDT/DTB data.
148options  	SMP			# Enable multiple cores
149options  	VFP			# Enable floating point hardware support
150options  	FREEBSD_BOOT_LOADER	# Process metadata passed from loader(8)
151
152# SoC-specific devices
153device  	ffec			# Freescale Fast Ethernet Controller
154#device  	fsliic			# Freescale i2c/iic (not ready yet)
155#device  	iic			# iic protocol
156#device  	iicbus			# iic bus
157#device  	imxwdt			# Watchdog. WARNING: can't be disabled!!!
158
159