printcap revision 50472 
1#	@(#)printcap	5.3 (Berkeley) 6/30/90
2# $FreeBSD: head/etc/printcap 50472 1999-08-27 23:37:10Z peter $
3
4#
5# This enables a simple local "raw" printer, hooked up to the first
6# parallel port.  No kind of filtering is done, so everything you
7# pass to the "lpr" command will be printed unmodified.
8#
9# Remember, for further print queues you're going to add, you have to
10# chose different spool directories (the "sd" capability below),
11# otherwise you will greatly confuse lpd.
12#
13# For some advanced printing, have a look at the "apsfilter" package.
14# It plugs into the lpd system, allowing you to print a variety of
15# different file types by converting everything to PostScript(tm)
16# format.  If you don't have a PostScript(tm) printer, don't panic,
17# but do also install the "ghostscript" package.
18#
19# Do also refer to section 7 (Printing) of the handbook.  A local copy
20# can be found under /usr/share/doc/handbook/handbook.{html,latin1}.
21#
22# Banner pages are now suppressed by default.  Remove the :sh:
23# capability to turn them back on.
24#
25lp|local line printer:\
26	:sh:\
27	:lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
28#
29# Sample remote printer.  The physical printer is on machine "lphost".
30# NB: you cannot perform any kind of local filtering directly.  If
31# you need local filters (e.g. LF -> CR-LF conversion for HP printers),
32# create a filter script that recursively calls lpd with another -P
33# argument after filtering.
34#
35#remote|sample remote printer:\
36#	:sh:\
37#	:rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:
38#
39# Simple Russian printer with hardware CP866 character set, output filter
40# used for KOI8-R -> CP866 conversion
41#
42#lp|Russian local line printer:\
43#	:sh:of=/usr/libexec/lpr/ru/koi2alt:\
44#	:lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
45