ttys revision 290107
1# 2# $FreeBSD: stable/10/etc/etc.mips/ttys 290107 2015-10-28 13:30:14Z gjb $ 3# @(#)ttys 5.1 (Berkeley) 4/17/89 4# 5# This file specifies various information about terminals on the system. 6# It is used by several different programs. Common entries for the 7# various columns include: 8# 9# name The name of the terminal device. 10# 11# getty The program to start running on the terminal. Typically a 12# getty program, as the name implies. Other common entries 13# include none, when no getty is needed, and xdm, to start the 14# X Window System. 15# 16# type The initial terminal type for this port. For hardwired 17# terminal lines, this will contain the type of terminal used. 18# For virtual consoles, the correct type is typically xterm. 19# Other common values include dialup for incoming modem ports, and 20# unknown when the terminal type cannot be predetermined. 21# 22# status Must be on or off. If on, init will run the getty program on 23# the specified port. If the word "secure" appears, this tty 24# allows root login. 25# 26# name getty type status comments 27# 28# If console is marked "insecure", then init will ask for the root password 29# when going to single-user mode. 30console none unknown off secure 31# Serial terminals 32# The 'dialup' keyword identifies dialin lines to login, fingerd etc. 33ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure 34ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure 35ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure 36ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure 37