rc.conf revision 295461
1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: stable/10/etc/defaults/rc.conf 295461 2016-02-10 07:16:17Z cy $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24#rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot 27rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 28early_late_divider="FILESYSTEMS" # Script that separates early/late 29 # stages of the boot process. Make sure you know 30 # the ramifications if you change this. 31 # See rc.conf(5) for more details. 32always_force_depends="NO" # Set to check that indicated dependencies are 33 # running during boot (can increase boot time). 34 35apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 36apmd_enable="NO" # Run apmd to handle APM event from userland. 37apmd_flags="" # Flags to apmd (if enabled). 38ddb_enable="NO" # Set to YES to load ddb scripts at boot. 39ddb_config="/etc/ddb.conf" # ddb(8) config file. 40devd_enable="YES" # Run devd, to trigger programs on device tree changes. 41devd_flags="" # Additional flags for devd(8). 42#kld_list="" # Kernel modules to load after local disks are mounted 43kldxref_enable="NO" # Build linker.hints files with kldxref(8). 44kldxref_clobber="NO" # Overwrite old linker.hints at boot. 45kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 46powerd_enable="NO" # Run powerd to lower our power usage. 47powerd_flags="" # Flags to powerd (if enabled). 48tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 49tmpsize="20m" # Size of mfs /tmp if created 50tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 51varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 52varsize="32m" # Size of mfs /var if created 53varmfs_flags="-S" # Extra mount options for the mfs /var 54populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 55cleanvar_enable="YES" # Clean the /var directory 56local_startup="/usr/local/etc/rc.d" # startup script dirs. 57script_name_sep=" " # Change if your startup scripts' names contain spaces 58rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 59 60# ZFS support 61zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 62 63gptboot_enable="YES" # GPT boot success/failure reporting. 64 65# Experimental - test before enabling 66gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 67gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 68gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 69gbde_lockdir="/etc" # Where to look for gbde lockfiles 70 71# GELI disk encryption configuration. 72geli_devices="" # List of devices to automatically attach in addition to 73 # GELI devices listed in /etc/fstab. 74geli_tries="" # Number of times to attempt attaching geli device. 75 # If empty, kern.geom.eli.tries will be used. 76geli_default_flags="" # Default flags for geli(8). 77geli_autodetach="YES" # Automatically detach on last close. 78 # Providers are marked as such when all file systems are 79 # mounted. 80# Example use. 81#geli_devices="da1 mirror/home" 82#geli_da1_flags="-p -k /etc/geli/da1.keys" 83#geli_da1_autodetach="NO" 84#geli_mirror_home_flags="-k /etc/geli/home.keys" 85 86root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 87fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 88fsck_y_flags="" # Additional flags for fsck -y 89background_fsck="YES" # Attempt to run fsck in the background where possible. 90background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 91netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems. 92extra_netfs_types="NO" # List of network extra filesystem types for delayed 93 # mount at startup (or NO). 94 95############################################################## 96### Network configuration sub-section ###################### 97############################################################## 98 99### Basic network and firewall/security options: ### 100hostname="" # Set this! 101hostid_enable="YES" # Set host UUID. 102hostid_file="/etc/hostid" # File with hostuuid. 103nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 104dhclient_program="/sbin/dhclient" # Path to dhcp client program. 105dhclient_flags="" # Extra flags to pass to dhcp client. 106#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 107background_dhclient="NO" # Start dhcp client in the background. 108#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 109synchronous_dhclient="NO" # Start dhclient directly on configured 110 # interfaces during startup. 111defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 112defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 113netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 114wpa_supplicant_program="/usr/sbin/wpa_supplicant" 115wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 116wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 117# 118firewall_enable="NO" # Set to YES to enable firewall functionality 119firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 120firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 121firewall_quiet="NO" # Set to YES to suppress rule display 122firewall_logging="NO" # Set to YES to enable events logging 123firewall_logif="NO" # Set to YES to create logging-pseudo interface 124firewall_flags="" # Flags passed to ipfw when type is a file 125firewall_coscripts="" # List of executables/scripts to run after 126 # firewall starts/stops 127firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 128 # firewall. 129#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 130 # "client" firewall. 131firewall_simple_iif="ed1" # Inside network interface for "simple" 132 # firewall. 133firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 134 # firewall. 135firewall_simple_oif="ed0" # Outside network interface for "simple" 136 # firewall. 137firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 138 # firewall. 139#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" 140 # firewall. 141#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 142 # for "simple" firewall. 143#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" 144 # firewall. 145#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 146 # for "simple" firewall. 147firewall_myservices="" # List of TCP ports on which this host 148 # offers services for "workstation" firewall. 149firewall_allowservices="" # List of IPs which have access to 150 # $firewall_myservices for "workstation" 151 # firewall. 152firewall_trusted="" # List of IPs which have full access to this 153 # host for "workstation" firewall. 154firewall_logdeny="NO" # Set to YES to log default denied incoming 155 # packets for "workstation" firewall. 156firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 157 # for which denied incoming packets are not 158 # logged for "workstation" firewall. 159firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 160firewall_nat_interface="" # Public interface or IPaddress to use 161firewall_nat_flags="" # Additional configuration parameters 162dummynet_enable="NO" # Load the dummynet(4) module 163ip_portrange_first="NO" # Set first dynamically allocated port 164ip_portrange_last="NO" # Set last dynamically allocated port 165ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 166ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 167ike_flags="" # Additional flags for IKE daemon 168ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 169ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 170natd_program="/sbin/natd" # path to natd, if you want a different one. 171natd_enable="NO" # Enable natd (if firewall_enable == YES). 172natd_interface="" # Public interface or IPaddress to use. 173natd_flags="" # Additional flags for natd. 174ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 175ipfilter_program="/sbin/ipf" # where the ipfilter program lives 176ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 177 # /usr/src/contrib/ipfilter/rules for examples 178ipfilter_flags="" # additional flags for ipfilter 179ipnat_enable="NO" # Set to YES to enable ipnat functionality 180ipnat_program="/sbin/ipnat" # where the ipnat program lives 181ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 182ipnat_flags="" # additional flags for ipnat 183ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 184ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 185ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 186ipfs_enable="NO" # Set to YES to enable saving and restoring 187 # of state tables at shutdown and boot 188ipfs_program="/sbin/ipfs" # where the ipfs program lives 189ipfs_flags="" # additional flags for ipfs 190pf_enable="NO" # Set to YES to enable packet filter (pf) 191pf_rules="/etc/pf.conf" # rules definition file for pf 192pf_program="/sbin/pfctl" # where the pfctl program lives 193pf_flags="" # additional flags for pfctl 194pflog_enable="NO" # Set to YES to enable packet filter logging 195pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 196pflog_program="/sbin/pflogd" # where the pflogd program lives 197pflog_flags="" # additional flags for pflogd 198ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 199ftpproxy_flags="" # additional flags for ftp-proxy(8) 200pfsync_enable="NO" # Expose pf state to other hosts for syncing 201pfsync_syncdev="" # Interface for pfsync to work through 202pfsync_syncpeer="" # IP address of pfsync peer host 203pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 204tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 205log_in_vain="0" # >=1 to log connects to ports w/o listeners. 206tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 207tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 208 # NOTE: this violates the TCP specification 209icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 210icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 211network_interfaces="auto" # List of network interfaces (or "auto"). 212cloned_interfaces="" # List of cloned network interfaces to create. 213#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 214#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 215#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 216#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 217#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 218#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 219#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 220#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device 221#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 222#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 223#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8) 224#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 225# 226#autobridge_interfaces="bridge0" # List of bridges to check 227#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 228# 229# If you have any sppp(4) interfaces above, you might also want to set 230# the following parameters. Refer to spppcontrol(8) for their meaning. 231sppp_interfaces="" # List of sppp interfaces. 232#sppp_interfaces="...0" # example: sppp over ... 233#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 234fec_interfaces="" # List of Fast EtherChannels. 235#fec_interfaces="fec0 fec1" 236#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs 237#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs 238 239# User ppp configuration. 240ppp_enable="NO" # Start user-ppp (or NO). 241ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 242ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 243 # For details see man page for ppp(8). Default is auto. 244ppp_nat="YES" # Use PPP's internal network address translation or NO. 245ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 246ppp_user="root" # Which user to run ppp as 247 248# Start multiple instances of ppp at boot time 249#ppp_profile="profile1 profile2 profile3" # Which profiles to use 250#ppp_profile1_mode="ddial" # Override ppp mode for profile1 251#ppp_profile2_nat="NO" # Override nat mode for profile2 252# profile3 uses default ppp_mode and ppp_nat 253 254### Network daemon (miscellaneous) ### 255hostapd_enable="NO" # Run hostap daemon. 256syslogd_enable="YES" # Run syslog daemon (or NO). 257syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 258syslogd_flags="-s" # Flags to syslogd (if enabled). 259altlog_proglist="" # List of chrooted applicatioins in /var 260inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 261inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 262inetd_flags="-wW -C 60" # Optional flags to inetd 263iscsid_enable="NO" # iSCSI initiator daemon. 264iscsictl_enable="NO" # iSCSI initiator autostart. 265iscsictl_flags="-Aa" # Optional flags to iscsictl. 266hastd_enable="NO" # Run the HAST daemon (YES/NO). 267hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 268hastd_flags="" # Optional flags to hastd. 269ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 270local_unbound_enable="NO" # local caching resolver 271 272# 273# kerberos. Do not run the admin daemons on slave servers 274# 275kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 276kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 277kdc_flags="" # Additional flags to the kerberos 5 KDC 278kadmind_enable="NO" # Run kadmind (or NO) 279kadmind_program="/usr/libexec/kadmind" # path to kadmind 280kpasswdd_enable="NO" # Run kpasswdd (or NO) 281kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 282kfd_enable="NO" # Run kfd (or NO) 283kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 284kfd_flags="" 285ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 286 # (master daemon). 287ipropd_master_program="/usr/libexec/ipropd-master" 288ipropd_master_flags="" # Flags to ipropd-master. 289ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 290ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 291ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 292 # (slave daemon). 293ipropd_slave_program="/usr/libexec/ipropd-slave" 294ipropd_slave_flags="" # Flags to ipropd-slave. 295ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 296ipropd_slave_master="" # master node name. 297 298gssd_enable="NO" # Run the gssd daemon (or NO). 299gssd_program="/usr/sbin/gssd" # Path to gssd. 300gssd_flags="" # Flags for gssd. 301 302rwhod_enable="NO" # Run the rwho daemon (or NO). 303rwhod_flags="" # Flags for rwhod 304rarpd_enable="NO" # Run rarpd (or NO). 305rarpd_flags="-a" # Flags to rarpd. 306bootparamd_enable="NO" # Run bootparamd (or NO). 307bootparamd_flags="" # Flags to bootparamd 308pppoed_enable="NO" # Run the PPP over Ethernet daemon. 309pppoed_provider="*" # Provider and ppp(8) config file entry. 310pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 311pppoed_interface="fxp0" # The interface that pppoed runs on. 312sshd_enable="NO" # Enable sshd 313sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 314sshd_flags="" # Additional flags for sshd. 315ftpd_enable="NO" # Enable stand-alone ftpd. 316ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 317ftpd_flags="" # Additional flags to stand-alone ftpd. 318 319### Network daemon (NFS): All need rpcbind_enable="YES" ### 320amd_enable="NO" # Run amd service with $amd_flags (or NO). 321amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 322amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 323amd_map_program="NO" # Can be set to "ypcat -k amd.master" 324autofs_enable="NO" # Run autofs daemons. 325automount_flags="" # Flags to automount(8) (if autofs enabled). 326automountd_flags="" # Flags to automountd(8) (if autofs enabled). 327autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 328nfs_client_enable="NO" # This host is an NFS client (or NO). 329nfs_access_cache="60" # Client cache timeout in seconds 330nfs_server_enable="NO" # This host is an NFS server (or NO). 331oldnfs_server_enable="NO" # Run the old NFS server (YES/NO). 332nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 333nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 334mountd_enable="NO" # Run mountd (or NO). 335mountd_flags="-r" # Flags to mountd (if NFS server enabled). 336weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 337nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 338nfs_bufpackets="" # bufspace (in packets) for client 339rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 340rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 341rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 342rpc_statd_flags="" # Flags to rpc.statd (if enabled). 343rpcbind_enable="NO" # Run the portmapper service (YES/NO). 344rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 345rpcbind_flags="" # Flags to rpcbind (if enabled). 346rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 347keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 348keyserv_flags="" # Flags to keyserv (if enabled). 349nfsv4_server_enable="NO" # Enable support for NFSv4 350nfscbd_enable="NO" # NFSv4 client side callback daemon 351nfscbd_flags="" # Flags for nfscbd 352nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 353nfsuserd_flags="" # Flags for nfsuserd 354 355### Network Time Services options: ### 356timed_enable="NO" # Run the time daemon (or NO). 357timed_flags="" # Flags to timed (if enabled). 358ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 359ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 360ntpdate_flags="-b" # Flags to ntpdate (if enabled). 361ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 362ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 363ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 364ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 365ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 366ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 367ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 368 # Flags to ntpd (if enabled). 369ntp_src_leapfile="/etc/ntp/leap-seconds" 370 # Initial source for ntpd leapfile 371ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 372 # Working copy (updated weekly) leapfile 373ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 374 # Source from which to fetch leapfile 375ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 376 # e.g. --no-verify-peer 377ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 378 # expiry. 379ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 380 381# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 382nis_client_enable="NO" # We're an NIS client (or NO). 383nis_client_flags="" # Flags to ypbind (if enabled). 384nis_ypset_enable="NO" # Run ypset at boot time (or NO). 385nis_ypset_flags="" # Flags to ypset (if enabled). 386nis_server_enable="NO" # We're an NIS server (or NO). 387nis_server_flags="" # Flags to ypserv (if enabled). 388nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 389nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 390nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 391nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 392 393### SNMP daemon ### 394# Be sure to understand the security implications of running SNMP v1/v2 395# in your network. 396bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 397bsnmpd_flags="" # Flags for bsnmpd. 398 399### Network routing options: ### 400defaultrouter="NO" # Set to default gateway (or NO). 401static_arp_pairs="" # Set to static ARP list (or leave empty). 402static_ndp_pairs="" # Set to static NDP list (or leave empty). 403static_routes="" # Set to static route list (or leave empty). 404natm_static_routes="" # Set to static route list for NATM (or leave empty). 405gateway_enable="NO" # Set to YES if this host will be a gateway. 406routed_enable="NO" # Set to YES to enable a routing daemon. 407routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 408routed_flags="-q" # Flags for routing daemon. 409mrouted_enable="NO" # Do IPv4 multicast routing. 410mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast 411 # routing daemon. You need to 412 # install it from package or 413 # port. 414mrouted_flags="" # Flags for multicast routing daemon. 415ipxgateway_enable="NO" # Set to YES to enable IPX routing. 416ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 417ipxrouted_flags="" # Flags for IPX routing daemon. 418arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 419forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 420accept_sourceroute="NO" # accept source routed packets to us 421 422### ATM interface options: ### 423atm_enable="NO" # Configure ATM interfaces (or NO). 424#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 425#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 426#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 427#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 428#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 429#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 430atm_pvcs="" # Set to PVC list (or leave empty). 431atm_arps="" # Set to permanent ARP list (or leave empty). 432 433### Bluetooth ### 434hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 435hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 436 437sdpd_enable="NO" # Enable sdpd(8) (or NO) 438sdpd_control="/var/run/sdp" # sdpd(8) control socket 439sdpd_groupname="nobody" # set spdp(8) user/group to run as after 440sdpd_username="nobody" # it initializes 441 442bthidd_enable="NO" # Enable bthidd(8) (or NO) 443bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 444bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 445 446rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 447rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 448# 449#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 450rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 451#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 452#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 453# 454#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 455rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 456#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 457#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 458 459ubthidhci_enable="NO" # Switch an USB BT controller present on 460#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 461#ubthidhci_addr="2" # Check usbconfig list to find the correct 462 # numbers for your system. 463 464### Network link/usability verification options 465netwait_enable="NO" # Enable rc.d/netwait (or NO) 466#netwait_ip="" # Wait for ping response from any IP in this list. 467netwait_timeout="60" # Total number of seconds to perform pings. 468#netwait_if="" # Wait for active link on each intf in this list. 469netwait_if_timeout="30" # Total number of seconds to monitor link state. 470 471### Miscellaneous network options: ### 472icmp_bmcastecho="NO" # respond to broadcast ping packets 473 474### IPv6 options: ### 475ipv6_network_interfaces="auto" # List of IPv6 network interfaces 476 # (or "auto" or "none"). 477ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 478 # corresponding $ifconfig_IF_ipv6 is 479 # marked as IFDISABLED for security 480 # reason. 481ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 482#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 483ipv6_static_routes="" # Set to static route list (or leave empty). 484#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 485 # route toward loopback interface. 486#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 487ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 488ipv6_cpe_wanif="NO" # Set to the upstram interface name if this 489 # node will work as a router to forward IPv6 490 # packets not explicitly addressed to itself. 491ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 492 # (RFC 4941) 493 494route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 495route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 496route6d_flags="" # Flags to IPv6 routing daemon. 497#route6d_flags="-l" # Example for route6d with only IPv6 site local 498 # addrs. 499#route6d_flags="-q" # If you want to run a routing daemon on an end 500 # node, you should stop advertisement. 501#ipv6_network_interfaces="ed0 ep0" # Examples for router 502 # or static configuration for end node. 503 # Choose correct prefix value. 504#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 505#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 506ipv6_default_interface="NO" # Default output interface for scoped addrs. 507 # This works only with 508 # ipv6_gateway_enable="NO". 509rtsol_flags="" # Flags to IPv6 router solicitation. 510rtsold_enable="NO" # Set to YES to enable an IPv6 router 511 # solicitation daemon. 512rtsold_flags="-a" # Flags to an IPv6 router solicitation 513 # daemon. 514rtadvd_enable="NO" # Set to YES to enable an IPv6 router 515 # advertisement daemon. If set to YES, 516 # this router becomes a possible candidate 517 # IPv6 default router for local subnets. 518rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 519mroute6d_enable="NO" # Do IPv6 multicast routing. 520mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 521 # routing daemon. You need to 522 # install it from package or 523 # port. 524mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 525stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 526 # tunneling interface. Specify this entry 527 # to enable 6to4 interface. 528stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 529 # to limit peer addr range. Effective value 530 # is 0-31. 531stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 532 # If you like, you can set "AUTO" for this. 533stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 534ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 535 # IPv6-to-IPv4 TCP translator. You also need 536 # faithd(8) setup. 537ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 538 # communication. (like ::ffff:a.b.c.d) 539ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 540 # see /usr/src/contrib/ipfilter/rules 541 # for examples 542ip6addrctl_enable="YES" # Set to YES to enable default address selection 543ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 544ip6addrctl_policy="AUTO" # A pre-defined address selection policy 545 # (ipv4_prefer, ipv6_prefer, or AUTO) 546 547############################################################## 548### System console options ################################# 549############################################################## 550 551keyboard="" # keyboard device to use (default /dev/kbd0). 552keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 553keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 554keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 555keychange="NO" # function keys default values (or NO). 556cursor="NO" # cursor type {normal|blink|destructive} (or NO). 557scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 558font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 559font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 560font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 561blanktime="300" # blank time (in seconds) or "NO" to turn it off. 562saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 563moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 564 # specifically overriden in rc.conf(5). 565moused_enable="NO" # Run the mouse daemon. 566moused_type="auto" # See man page for rc.conf(5) for available settings. 567moused_port="/dev/psm0" # Set to your mouse port. 568moused_flags="" # Any additional flags to moused. 569mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 570 # language code table, specify alternative range 571 # start like mousechar_start=3, see vidcontrol(1) 572allscreens_flags="" # Set this vidcontrol mode for all virtual screens 573allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 574 575############################################################## 576### Mail Transfer Agent (MTA) options ###################### 577############################################################## 578 579mta_start_script="/etc/rc.sendmail" 580 # Script to start your chosen MTA, called by /etc/rc. 581# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 582sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 583sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 584sendmail_procname="/usr/sbin/sendmail" # sendmail process name 585sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 586sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 587#sendmail_cert_cn="CN" # CN of the generate certificate 588sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 589sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 590 # Flags for localhost-only MTA 591sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 592sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 593sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 594sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 595 # Flags for sendmail_msp_queue daemon. 596sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 597 598 599############################################################## 600### Miscellaneous administrative options ################### 601############################################################## 602 603auditd_enable="NO" # Run the audit daemon. 604auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 605auditd_flags="" # Which options to pass to the audit daemon. 606auditdistd_enable="NO" # Run the audit daemon. 607auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 608auditdistd_flags="" # Which options to pass to the auditdistd daemon. 609cron_enable="YES" # Run the periodic job daemon. 610cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 611cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 612cron_flags="" # Which options to pass to the cron daemon. 613lpd_enable="NO" # Run the line printer daemon. 614lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 615lpd_flags="" # Flags to lpd (if enabled). 616nscd_enable="NO" # Run the nsswitch caching daemon. 617chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 618chkprintcap_flags="-d" # Create missing directories by default. 619dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO). 620dumpdir="/var/crash" # Directory where crash dumps are to be stored 621savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 622 # By default, only the 10 most recent kernel dumps 623 # are saved. 624crashinfo_enable="YES" # Automatically generate crash dump summary. 625crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 626quota_enable="NO" # turn on quotas on startup (or NO). 627check_quotas="YES" # Check quotas on startup (or NO). 628quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 629quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 630quotacheck_flags="-a" # Check all file system quotas (if enabled) 631accounting_enable="NO" # Turn on process accounting (or NO). 632ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 633ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 634firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 635 # this file exists. Should be on a R/W filesystem so 636 # the file can be deleted after the boot completes. 637 638# Emulation/compatibility services provided by /etc/rc.d/abi 639sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 640linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 641svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 642clear_tmp_enable="NO" # Clear /tmp at startup. 643clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 644ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 645ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 646 # shared library search paths 647ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 648 # 32-bit compatibility shared library search paths 649ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 650 # a.out shared library search paths 651ldconfig_local_dirs="/usr/local/libdata/ldconfig" 652 # Local directories with ldconfig configuration files. 653ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 654 # Local directories with 32-bit compatibility ldconfig 655 # configuration files. 656kern_securelevel_enable="NO" # kernel security level (see security(7)) 657kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 658 # Note that setting securelevel to 0 will result 659 # in the system booting with securelevel set to 1, as 660 # init(8) will raise the level when rc(8) completes. 661update_motd="YES" # update version info in /etc/motd (or NO) 662entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 663 # /var/db/entropy-file is preferred if / is not avail. 664entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 665entropy_save_sz="2048" # Size of the entropy cache files. 666entropy_save_num="8" # Number of entropy cache files to save. 667harvest_interrupt="YES" # Entropy device harvests interrupt randomness 668harvest_ethernet="YES" # Entropy device harvests ethernet randomness 669harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 670harvest_swi="YES" # Entropy device harvests internal SWI randomness 671dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 672watchdogd_enable="NO" # Start the software watchdog daemon 673watchdogd_flags="" # Flags to watchdogd (if enabled) 674devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 675 # devfs(8) rules. 676devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 677devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 678 # apply (must be mounted already, i.e. fstab(5)) 679devfs_load_rulesets="YES" # Enable to always load the default rulesets 680performance_cx_lowest="HIGH" # Online CPU idle state 681performance_cpu_freq="NONE" # Online CPU frequency 682economy_cx_lowest="HIGH" # Offline CPU idle state 683economy_cpu_freq="NONE" # Offline CPU frequency 684virecover_enable="YES" # Perform housekeeping for the vi(1) editor 685ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 686bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 687 # ruleset file. 688newsyslog_enable="YES" # Run newsyslog at startup. 689newsyslog_flags="-CN" # Newsyslog flags to create marked files 690mixer_enable="YES" # Run the sound mixer. 691opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 692 693# rctl(8) requires kernel options RACCT and RCTL 694rctl_enable="NO" # Load rctl(8) rules on boot 695rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 696 697############################################################## 698### Jail Configuration (see rc.conf(5) manual page) ########## 699############################################################## 700jail_enable="NO" # Set to NO to disable starting of any jails 701jail_parallel_start="NO" # Start jails in the background 702jail_list="" # Space separated list of names of jails 703 704############################################################## 705### Define source_rc_confs, the mechanism used by /etc/rc.* ## 706### scripts to source rc_conf_files overrides safely. ## 707############################################################## 708 709if [ -z "${source_rc_confs_defined}" ]; then 710 source_rc_confs_defined=yes 711 source_rc_confs() { 712 local i sourced_files 713 for i in ${rc_conf_files}; do 714 case ${sourced_files} in 715 *:$i:*) 716 ;; 717 *) 718 sourced_files="${sourced_files}:$i:" 719 if [ -r $i ]; then 720 . $i 721 fi 722 ;; 723 esac 724 done 725 } 726fi 727