config revision 162911
1#!/bin/sh 2# 3# OpenSSL config: determine the operating system and run ./Configure 4# 5# "config -h" for usage information. 6# 7# this is a merge of minarch and GuessOS from the Apache Group. 8# Originally written by Tim Hudson <tjh@cryptsoft.com>. 9 10# Original Apache Group comments on GuessOS 11 12# Simple OS/Platform guesser. Similar to config.guess but 13# much, much smaller. Since it was developed for use with 14# Apache, it follows under Apache's regular licensing 15# with one specific addition: Any changes or additions 16# to this script should be Emailed to the Apache 17# group (apache@apache.org) in general and to 18# Jim Jagielski (jim@jaguNET.com) in specific. 19# 20# Be as similar to the output of config.guess/config.sub 21# as possible. 22 23PREFIX="" 24SUFFIX="" 25TEST="false" 26EXE="" 27 28# pick up any command line args to config 29for i 30do 31case "$i" in 32-d*) PREFIX="debug-";; 33-t*) TEST="true";; 34-h*) TEST="true"; cat <<EOF 35Usage: config [options] 36 -d Add a debug- prefix to machine choice. 37 -t Test mode, do not run the Configure perl script. 38 -h This help. 39 40Any other text will be passed to the Configure perl script. 41See INSTALL for instructions. 42 43EOF 44;; 45*) options=$options" $i" ;; 46esac 47done 48 49# First get uname entries that we use below 50 51MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 52RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 53SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 54VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 55 56 57# Now test for ISC and SCO, since it is has a braindamaged uname. 58# 59# We need to work around FreeBSD 1.1.5.1 60( 61XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 62if [ "x$XREL" != "x" ]; then 63 if [ -f /etc/kconfig ]; then 64 case "$XREL" in 65 4.0|4.1) 66 echo "${MACHINE}-whatever-isc4"; exit 0 67 ;; 68 esac 69 else 70 case "$XREL" in 71 3.2v4.2) 72 echo "whatever-whatever-sco3"; exit 0 73 ;; 74 3.2v5.0*) 75 echo "whatever-whatever-sco5"; exit 0 76 ;; 77 4.2MP) 78 case "x${VERSION}" in 79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 82 esac 83 ;; 84 4.2) 85 echo "whatever-whatever-unixware1"; exit 0 86 ;; 87 5*) 88 case "x${VERSION}" in 89 # We hardcode i586 in place of ${MACHINE} for the 90 # following reason. The catch is that even though Pentium 91 # is minimum requirement for platforms in question, 92 # ${MACHINE} gets always assigned to i386. Now, problem 93 # with i386 is that it makes ./config pass 386 to 94 # ./Configure, which in turn makes make generate 95 # inefficient SHA-1 (for this moment) code. 96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;; 97 esac 98 ;; 99 esac 100 fi 101fi 102# Now we simply scan though... In most cases, the SYSTEM info is enough 103# 104case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 105 MPE/iX:*) 106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 107 echo "parisc-hp-MPE/iX"; exit 0 108 ;; 109 A/UX:*) 110 echo "m68k-apple-aux3"; exit 0 111 ;; 112 113 AIX:[3-9]:4:*) 114 echo "${MACHINE}-ibm-aix"; exit 0 115 ;; 116 117 AIX:*:[5-9]:*) 118 echo "${MACHINE}-ibm-aix"; exit 0 119 ;; 120 121 AIX:*) 122 echo "${MACHINE}-ibm-aix3"; exit 0 123 ;; 124 125 dgux:*) 126 echo "${MACHINE}-dg-dgux"; exit 0 127 ;; 128 129 HI-UX:*) 130 echo "${MACHINE}-hi-hiux"; exit 0 131 ;; 132 133 HP-UX:*) 134 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 135 case "$HPUXVER" in 136 1[0-9].*) # HPUX 10 and 11 targets are unified 137 echo "${MACHINE}-hp-hpux1x"; exit 0 138 ;; 139 *) 140 echo "${MACHINE}-hp-hpux"; exit 0 141 ;; 142 esac 143 ;; 144 145 IRIX:5.*) 146 echo "mips2-sgi-irix"; exit 0 147 ;; 148 149 IRIX:6.*) 150 echo "mips3-sgi-irix"; exit 0 151 ;; 152 153 IRIX64:*) 154 echo "mips4-sgi-irix64"; exit 0 155 ;; 156 157 Linux:[2-9].*) 158 echo "${MACHINE}-whatever-linux2"; exit 0 159 ;; 160 161 Linux:1.*) 162 echo "${MACHINE}-whatever-linux1"; exit 0 163 ;; 164 165 GNU*) 166 echo "hurd-x86"; exit 0; 167 ;; 168 169 LynxOS:*) 170 echo "${MACHINE}-lynx-lynxos"; exit 0 171 ;; 172 173 BSD/OS:4.*) # BSD/OS always says 386 174 echo "i486-whatever-bsdi4"; exit 0 175 ;; 176 177 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 178 case `/sbin/sysctl -n hw.model` in 179 Pentium*) 180 echo "i586-whatever-bsdi"; exit 0 181 ;; 182 *) 183 echo "i386-whatever-bsdi"; exit 0 184 ;; 185 esac; 186 ;; 187 188 BSD/386:*|BSD/OS:*) 189 echo "${MACHINE}-whatever-bsdi"; exit 0 190 ;; 191 192 FreeBSD:*:*:*386*) 193 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 194 MACH=`sysctl -n hw.model` 195 ARCH='whatever' 196 case ${MACH} in 197 *386* ) MACH="i386" ;; 198 *486* ) MACH="i486" ;; 199 Pentium\ II*) MACH="i686" ;; 200 Pentium* ) MACH="i586" ;; 201 * ) MACH="$MACHINE" ;; 202 esac 203 case ${MACH} in 204 i[0-9]86 ) ARCH="pc" ;; 205 esac 206 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 207 ;; 208 209 FreeBSD:*) 210 echo "${MACHINE}-whatever-freebsd"; exit 0 211 ;; 212 213 NetBSD:*:*:*386*) 214 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 215 ;; 216 217 NetBSD:*) 218 echo "${MACHINE}-whatever-netbsd"; exit 0 219 ;; 220 221 OpenBSD:*) 222 echo "${MACHINE}-whatever-openbsd"; exit 0 223 ;; 224 225 OpenUNIX:*) 226 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 227 ;; 228 229 OSF1:*:*:*alpha*) 230 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 231 case "$OSFMAJOR" in 232 4|5) 233 echo "${MACHINE}-dec-tru64"; exit 0 234 ;; 235 1|2|3) 236 echo "${MACHINE}-dec-osf"; exit 0 237 ;; 238 *) 239 echo "${MACHINE}-dec-osf"; exit 0 240 ;; 241 esac 242 ;; 243 244 QNX:*) 245 case "$RELEASE" in 246 4*) 247 echo "${MACHINE}-whatever-qnx4" 248 ;; 249 6*) 250 echo "${MACHINE}-whatever-qnx6" 251 ;; 252 *) 253 echo "${MACHINE}-whatever-qnx" 254 ;; 255 esac 256 exit 0 257 ;; 258 259 Paragon*:*:*:*) 260 echo "i860-intel-osf1"; exit 0 261 ;; 262 263 Rhapsody:*) 264 echo "ppc-apple-rhapsody"; exit 0 265 ;; 266 267 Darwin:*) 268 case "$MACHINE" in 269 Power*) 270 echo "ppc-apple-darwin${VERSION}" 271 ;; 272 *) 273 echo "i386-apple-darwin${VERSION}" 274 ;; 275 esac 276 exit 0 277 ;; 278 279 SunOS:5.*) 280 echo "${MACHINE}-whatever-solaris2"; exit 0 281 ;; 282 283 SunOS:*) 284 echo "${MACHINE}-sun-sunos4"; exit 0 285 ;; 286 287 UNIX_System_V:4.*:*) 288 echo "${MACHINE}-whatever-sysv4"; exit 0 289 ;; 290 291 VOS:*:*:i786) 292 echo "i386-stratus-vos"; exit 0 293 ;; 294 295 VOS:*:*:*) 296 echo "hppa1.1-stratus-vos"; exit 0 297 ;; 298 299 *:4*:R4*:m88k) 300 echo "${MACHINE}-whatever-sysv4"; exit 0 301 ;; 302 303 DYNIX/ptx:4*:*) 304 echo "${MACHINE}-whatever-sysv4"; exit 0 305 ;; 306 307 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 308 echo "i486-ncr-sysv4"; exit 0 309 ;; 310 311 ULTRIX:*) 312 echo "${MACHINE}-unknown-ultrix"; exit 0 313 ;; 314 315 SINIX*|ReliantUNIX*) 316 echo "${MACHINE}-siemens-sysv4"; exit 0 317 ;; 318 319 POSIX-BC*) 320 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 321 ;; 322 323 machten:*) 324 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 325 ;; 326 327 library:*) 328 echo "${MACHINE}-ncr-sysv4"; exit 0 329 ;; 330 331 ConvexOS:*:11.0:*) 332 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 333 ;; 334 335 NEWS-OS:4.*) 336 echo "mips-sony-newsos4"; exit 0; 337 ;; 338 339 MINGW*) 340 echo "${MACHINE}-whatever-mingw"; exit 0; 341 ;; 342 CYGWIN*) 343 case "$RELEASE" in 344 [bB]*|1.0|1.[12].*) 345 echo "${MACHINE}-whatever-cygwin_pre1.3" 346 ;; 347 *) 348 echo "${MACHINE}-whatever-cygwin" 349 ;; 350 esac 351 exit 0 352 ;; 353 354 *"CRAY T3E") 355 echo "t3e-cray-unicosmk"; exit 0; 356 ;; 357 358 *CRAY*) 359 echo "j90-cray-unicos"; exit 0; 360 ;; 361 362 NONSTOP_KERNEL*) 363 echo "nsr-tandem-nsk"; exit 0; 364 ;; 365esac 366 367# 368# Ugg. These are all we can determine by what we know about 369# the output of uname. Be more creative: 370# 371 372# Do the Apollo stuff first. Here, we just simply assume 373# that the existance of the /usr/apollo directory is proof 374# enough 375if [ -d /usr/apollo ]; then 376 echo "whatever-apollo-whatever" 377 exit 0 378fi 379 380# Now NeXT 381ISNEXT=`hostinfo 2>/dev/null` 382case "$ISNEXT" in 383 *'NeXT Mach 3.3'*) 384 echo "whatever-next-nextstep3.3"; exit 0 385 ;; 386 *NeXT*) 387 echo "whatever-next-nextstep"; exit 0 388 ;; 389esac 390 391# At this point we gone through all the one's 392# we know of: Punt 393 394echo "${MACHINE}-whatever-${SYSTEM}" 395exit 0 396) 2>/dev/null | ( 397 398# --------------------------------------------------------------------------- 399# this is where the translation occurs into SSLeay terms 400# --------------------------------------------------------------------------- 401 402# figure out if gcc is available and if so we use it otherwise 403# we fallback to whatever cc does on the system 404GCCVER=`(gcc -dumpversion) 2>/dev/null` 405if [ "$GCCVER" != "" ]; then 406 CC=gcc 407 # then strip off whatever prefix egcs prepends the number with... 408 # Hopefully, this will work for any future prefixes as well. 409 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` 410 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 411 # does give us what we want though, so we use that. We just just the 412 # major and minor version numbers. 413 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 414 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 415else 416 CC=cc 417fi 418GCCVER=${GCCVER:-0} 419if [ "$SYSTEM" = "HP-UX" ];then 420 # By default gcc is a ILP32 compiler (with long long == 64). 421 GCC_BITS="32" 422 if [ $GCCVER -ge 30 ]; then 423 # PA64 support only came in with gcc 3.0.x. 424 # We check if the preprocessor symbol __LP64__ is defined... 425 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then 426 : # __LP64__ has slipped through, it therefore is not defined 427 else 428 GCC_BITS="64" 429 fi 430 fi 431fi 432if [ "$SYSTEM" = "SunOS" ]; then 433 if [ $GCCVER -ge 30 ]; then 434 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 435 # to be working, at the very least 'make test' passes... 436 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 437 GCC_ARCH="-m64" 438 else 439 GCC_ARCH="-m32" 440 fi 441 fi 442 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 443 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 444 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 445 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 446 CCVER=${CCVER:-0} 447 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then 448 CC=cc # overrides gcc!!! 449 if [ $CCVER -eq 50 ]; then 450 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 451 echo " patch #107357-01 or later applied." 452 sleep 5 453 fi 454 fi 455fi 456 457if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 458 # check for Compaq C, expected output is "blah-blah C Vx.x" 459 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 460 egrep -e '.* C V[0-9]\.[0-9]' | \ 461 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 462 CCCVER=${CCCVER:-0} 463 if [ $CCCVER -gt 60 ]; then 464 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 465 # only on hash routines and des, otherwise gcc (2.95) 466 # keeps along rather tight... 467 fi 468fi 469 470if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 471 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc 472fi 473 474CCVER=${CCVER:-0} 475 476# read the output of the embedded GuessOS 477read GUESSOS 478 479echo Operating system: $GUESSOS 480 481# now map the output into SSLeay terms ... really should hack into the 482# script above so we end up with values in vars but that would take 483# more time that I want to waste at the moment 484case "$GUESSOS" in 485 mips2-sgi-irix) 486 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 487 CPU=${CPU:-0} 488 if [ $CPU -ge 4000 ]; then 489 options="$options -mips2" 490 fi 491 OUT="irix-$CC" 492 ;; 493 mips3-sgi-irix) 494 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 495 #CPU=${CPU:-0} 496 #if [ $CPU -ge 5000 ]; then 497 # options="$options -mips4" 498 #else 499 # options="$options -mips3" 500 #fi 501 OUT="irix-mips3-$CC" 502 ;; 503 mips4-sgi-irix64) 504 echo "WARNING! If you wish to build 64-bit library, then you have to" 505 echo " invoke './Configure irix64-mips4-$CC' *manually*." 506 if [ "$TEST" = "false" -a -t 1 ]; then 507 echo " You have about 5 seconds to press Ctrl-C to abort." 508 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 509 fi 510 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 511 #CPU=${CPU:-0} 512 #if [ $CPU -ge 5000 ]; then 513 # options="$options -mips4" 514 #else 515 # options="$options -mips3" 516 #fi 517 OUT="irix-mips3-$CC" 518 ;; 519 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 520 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; 521 i386-apple-darwin*) OUT="darwin-i386-cc" ;; 522 alpha-*-linux2) 523 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` 524 case ${ISA:-generic} in 525 *[678]) OUT="linux-alpha+bwx-$CC" ;; 526 *) OUT="linux-alpha-$CC" ;; 527 esac 528 if [ "$CC" = "gcc" ]; then 529 case ${ISA:-generic} in 530 EV5|EV45) options="$options -mcpu=ev5";; 531 EV56|PCA56) options="$options -mcpu=ev56";; 532 *) options="$options -mcpu=ev6";; 533 esac 534 fi 535 ;; 536 ppc64-*-linux2) 537 echo "WARNING! If you wish to build 64-bit library, then you have to" 538 echo " invoke './Configure linux-ppc64' *manually*." 539 if [ "$TEST" = "false" -a -t 1 ]; then 540 echo " You have about 5 seconds to press Ctrl-C to abort." 541 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 542 fi 543 OUT="linux-ppc" 544 ;; 545 ppc-*-linux2) OUT="linux-ppc" ;; 546 ia64-*-linux?) OUT="linux-ia64" ;; 547 sparc64-*-linux2) 548 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 549 echo " and wish to build 64-bit library, then you have to" 550 echo " invoke './Configure linux64-sparcv9' *manually*." 551 if [ "$TEST" = "false" -a -t 1 ]; then 552 echo " You have about 5 seconds to press Ctrl-C to abort." 553 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 554 fi 555 OUT="linux-sparcv9" ;; 556 sparc-*-linux2) 557 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` 558 case ${KARCH:-sun4} in 559 sun4u*) OUT="linux-sparcv9" ;; 560 sun4m) OUT="linux-sparcv8" ;; 561 sun4d) OUT="linux-sparcv8" ;; 562 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 563 esac ;; 564 parisc*-*-linux2) 565 # 64-bit builds under parisc64 linux are not supported and 566 # compiler is expected to generate 32-bit objects... 567 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` 568 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` 569 570 # ??TODO ?? Model transformations 571 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 572 # assuming no further arch. identification will ever be used by GCC. 573 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 574 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 575 # for these chips in the future. 576 # PA7300LC -> 7100LC (1.1) 577 # PA8200 -> 8000 (2.0) 578 # PA8500 -> 8000 (2.0) 579 # PA8600 -> 8000 (2.0) 580 581 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` 582 # Finish Model transformations 583 584 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" 585 OUT="linux-generic32" ;; 586 arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 587 arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; 588 s390*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN -DNO_ASM" ;; 589 x86_64-*-linux?) OUT="linux-x86_64" ;; 590 *86-*-linux2) OUT="linux-elf" 591 if [ "$GCCVER" -gt 28 ]; then 592 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then 593 options="$options -mcpu=pentium" 594 fi 595 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then 596 options="$options -mcpu=pentiumpro" 597 fi 598 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then 599 options="$options -mcpu=k6" 600 fi 601 fi ;; 602 *-*-linux1) OUT="linux-aout" ;; 603 *-*-linux2) OUT="linux-generic32" ;; 604 sun4u*-*-solaris2) 605 OUT="solaris-sparcv9-$CC" 606 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 607 if [ "$ISA64" != "" ]; then 608 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 609 echo "WARNING! If you wish to build 64-bit library, then you have to" 610 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 611 if [ "$TEST" = "false" -a -t 1 ]; then 612 echo " You have about 5 seconds to press Ctrl-C to abort." 613 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 614 fi 615 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 616 # $GCC_ARCH denotes default ABI chosen by compiler driver 617 # (first one found on the $PATH). I assume that user 618 # expects certain consistency with the rest of his builds 619 # and therefore switch over to 64-bit. <appro> 620 OUT="solaris64-sparcv9-gcc" 621 echo "WARNING! If you wish to build 32-bit library, then you have to" 622 echo " invoke './Configure solaris-sparcv9-gcc' *manually*." 623 if [ "$TEST" = "false" -a -t 1 ]; then 624 echo " You have about 5 seconds to press Ctrl-C to abort." 625 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 626 fi 627 elif [ "$GCC_ARCH" = "-m32" ]; then 628 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 629 echo " and wish to build 64-bit library, then you have to" 630 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." 631 if [ "$TEST" = "false" -a -t 1 ]; then 632 echo " You have about 5 seconds to press Ctrl-C to abort." 633 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 634 fi 635 fi 636 fi 637 ;; 638 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 639 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 640 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 641 *86*-*-solaris2) 642 ISA64=`(isalist) 2>/dev/null | grep amd64` 643 if [ "$ISA64" != "" ]; then 644 OUT="solaris64-x86_64-$CC" 645 else 646 OUT="solaris-x86-$CC" 647 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then 648 options="$options no-sse2" 649 fi 650 fi 651 ;; 652 *-*-sunos4) OUT="sunos-$CC" ;; 653 654 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; 655 alpha*-*-*bsd*) OUT="BSD-generic64; options="$options -DL_ENDIAN" ;; 656 powerpc64-*-*bsd*) OUT="BSD-generic64; options="$options -DB_ENDIAN" ;; 657 sparc64-*-*bsd*) OUT="BSD-sparc64" ;; 658 ia64-*-*bsd*) OUT="BSD-ia64" ;; 659 amd64-*-*bsd*) OUT="BSD-x86_64" ;; 660 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... 661 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD 662 libc=/usr/lib/libc.so 663 else # OpenBSD 664 # ld searches for highest libc.so.* and so do we 665 libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null` 666 fi 667 case "`(file -L $libc) 2>/dev/null`" in 668 *ELF*) OUT="BSD-x86-elf" ;; 669 *) OUT="BSD-x86"; options="$options no-sse2" ;; 670 esac ;; 671 *-*-*bsd*) OUT="BSD-generic32" ;; 672 673 *-*-osf) OUT="osf1-alpha-cc" ;; 674 *-*-tru64) OUT="tru64-alpha-cc" ;; 675 *-*-[Uu]nix[Ww]are7) 676 if [ "$CC" = "gcc" ]; then 677 OUT="unixware-7-gcc" ; options="$options no-sse2" 678 else 679 OUT="unixware-7" ; options="$options no-sse2 -D__i386__" 680 fi 681 ;; 682 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; 683 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; 684 *-*-vos) 685 options="$options no-threads no-shared no-asm no-dso" 686 EXE=".pm" 687 OUT="vos-$CC" ;; 688 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 689 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 690 *-siemens-sysv4) OUT="SINIX" ;; 691 *-hpux1*) 692 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then 693 OUT="hpux64-parisc2-gcc" 694 fi 695 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 696 KERNEL_BITS=${KERNEL_BITS:-32} 697 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 698 CPU_VERSION=${CPU_VERSION:-0} 699 # See <sys/unistd.h> for further info on CPU_VERSION. 700 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 701 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi." 702 echo " If you wish to build 32-bit library, the you have to" 703 echo " invoke './Configure hpux-ia64-cc' *manually*." 704 if [ "$TEST" = "false" -a -t 1 ]; then 705 echo " You have about 5 seconds to press Ctrl-C to abort." 706 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 707 fi 708 OUT="hpux64-ia64-cc" 709 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 710 OUT=${OUT:-"hpux-parisc2-${CC}"} 711 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 712 echo "WARNING! If you wish to build 64-bit library then you have to" 713 echo " invoke './Configure hpux64-parisc2-cc' *manually*." 714 if [ "$TEST" = "false" -a -t 1 ]; then 715 echo " You have about 5 seconds to press Ctrl-C to abort." 716 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 717 fi 718 fi 719 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 720 OUT="hpux-parisc-${CC}" 721 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 722 OUT="hpux-parisc-${CC}" 723 else # Motorola(?) CPU 724 OUT="hpux-$CC" 725 fi 726 options="$options -D_REENTRANT" ;; 727 *-hpux) OUT="hpux-parisc-$CC" ;; 728 *-aix) 729 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` 730 KERNEL_BITS=${KERNEL_BITS:-32} 731 OBJECT_MODE=${OBJECT_MODE:-32} 732 if [ "$CC" = "gcc" ]; then 733 OUT="aix-gcc" 734 elif [ $OBJECT_MODE -eq 64 ]; then 735 echo 'Your $OBJECT_MODE was found to be set to 64' 736 OUT="aix64-cc" 737 else 738 OUT="aix-cc" 739 if [ $KERNEL_BITS -eq 64 ]; then 740 echo "WARNING! If you wish to build 64-bit kit, then you have to" 741 echo " invoke './Configure aix64-cc' *manually*." 742 if [ "$TEST" = "false" -a -t 1 ]; then 743 echo " You have ~5 seconds to press Ctrl-C to abort." 744 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 745 fi 746 fi 747 fi 748 if (lsattr -E -O -l proc0 | grep -i powerpc) >/dev/null 2>&1; then 749 : # this applies even to Power3 and later, as they return PowerPC_POWER[345] 750 else 751 options="$options no-asm" 752 fi 753 ;; 754 # these are all covered by the catchall below 755 # *-dgux) OUT="dgux" ;; 756 mips-sony-newsos4) OUT="newsos4-gcc" ;; 757 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 758 *-*-cygwin) OUT="Cygwin" ;; 759 t3e-cray-unicosmk) OUT="cray-t3e" ;; 760 j90-cray-unicos) OUT="cray-j90" ;; 761 nsr-tandem-nsk) OUT="tandem-c89" ;; 762 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 763esac 764 765# NB: This atalla support has been superceded by the ENGINE support 766# That contains its own header and definitions anyway. Support can 767# be enabled or disabled on any supported platform without external 768# headers, eg. by adding the "hw-atalla" switch to ./config or 769# perl Configure 770# 771# See whether we can compile Atalla support 772#if [ -f /usr/include/atasi.h ] 773#then 774# options="$options -DATALLA" 775#fi 776 777# gcc < 2.8 does not support -mcpu=ultrasparc 778if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 779then 780 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." 781 echo " Upgrade to gcc-2.8 or later." 782 sleep 5 783 OUT=solaris-sparcv8-gcc 784fi 785if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 786then 787 echo "WARNING! Falling down to 'linux-sparcv8'." 788 echo " Upgrade to gcc-2.8 or later." 789 sleep 5 790 OUT=linux-sparcv8 791fi 792 793case "$GUESSOS" in 794 i386-*) options="$options 386" ;; 795esac 796 797for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha 798do 799 if [ ! -d crypto/$i ] 800 then 801 options="$options no-$i" 802 fi 803done 804 805# Discover Kerberos 5 (since it's still a prototype, we don't 806# do any guesses yet, that's why this section is commented away. 807#if [ -d /usr/kerberos ]; then 808# krb5_dir=/usr/kerberos 809# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ 810# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 811# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 812# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ 813# -a \( -f $krb5_dir/include/krb5.h \) ]; then 814# options="$options --with-krb5-flavor=MIT" 815# fi 816#elif [ -d /usr/heimdal ]; then 817# krb5_dir=/usr/heimdal 818# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ 819# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 820# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 821# -a \( -f $krb5_dir/include/krb5.h \) ]; then 822# options="$options --with-krb5-flavor=Heimdal" 823# fi 824#fi 825 826if [ -z "$OUT" ]; then 827 OUT="$CC" 828fi 829 830if [ ".$PERL" = . ] ; then 831 for i in . `echo $PATH | sed 's/:/ /g'`; do 832 if [ -f "$i/perl5$EXE" ] ; then 833 PERL="$i/perl5$EXE" 834 break; 835 fi; 836 done 837fi 838 839if [ ".$PERL" = . ] ; then 840 for i in . `echo $PATH | sed 's/:/ /g'`; do 841 if [ -f "$i/perl$EXE" ] ; then 842 if "$i/perl$EXE" -e 'exit($]<5.0)'; then 843 PERL="$i/perl$EXE" 844 break; 845 fi; 846 fi; 847 done 848fi 849 850if [ ".$PERL" = . ] ; then 851 echo "You need Perl 5." 852 exit 1 853fi 854 855# run Configure to check to see if we need to specify the 856# compiler for the platform ... in which case we add it on 857# the end ... otherwise we leave it off 858 859$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 860if [ $? = "0" ]; then 861 OUT="$OUT-$CC" 862fi 863 864OUT="$PREFIX$OUT" 865 866$PERL ./Configure LIST | grep "$OUT" > /dev/null 867if [ $? = "0" ]; then 868 echo Configuring for $OUT 869 870 if [ "$TEST" = "true" ]; then 871 echo $PERL ./Configure $OUT $options 872 else 873 $PERL ./Configure $OUT $options 874 fi 875else 876 echo "This system ($OUT) is not supported. See file INSTALL for details." 877fi 878) 879