config revision 100928
1#!/bin/sh 2# 3# OpenSSL config: determine the operating system and run ./Configure 4# 5# "config -h" for usage information. 6# 7# this is a merge of minarch and GuessOS from the Apache Group. 8# Originally written by Tim Hudson <tjh@cryptsoft.com>. 9 10# Original Apache Group comments on GuessOS 11 12# Simple OS/Platform guesser. Similar to config.guess but 13# much, much smaller. Since it was developed for use with 14# Apache, it follows under Apache's regular licensing 15# with one specific addition: Any changes or additions 16# to this script should be Emailed to the Apache 17# group (apache@apache.org) in general and to 18# Jim Jagielski (jim@jaguNET.com) in specific. 19# 20# Be as similar to the output of config.guess/config.sub 21# as possible. 22 23# First get uname entries that we use below 24 25MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 26RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 27SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 28VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 29 30 31# Now test for ISC and SCO, since it is has a braindamaged uname. 32# 33# We need to work around FreeBSD 1.1.5.1 34( 35XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 36if [ "x$XREL" != "x" ]; then 37 if [ -f /etc/kconfig ]; then 38 case "$XREL" in 39 4.0|4.1) 40 echo "${MACHINE}-whatever-isc4"; exit 0 41 ;; 42 esac 43 else 44 case "$XREL" in 45 3.2v4.2) 46 echo "whatever-whatever-sco3"; exit 0 47 ;; 48 3.2v5.0*) 49 echo "whatever-whatever-sco5"; exit 0 50 ;; 51 4.2MP) 52 if [ "x$VERSION" = "x2.01" ]; then 53 echo "${MACHINE}-whatever-unixware201"; exit 0 54 elif [ "x$VERSION" = "x2.02" ]; then 55 echo "${MACHINE}-whatever-unixware202"; exit 0 56 elif [ "x$VERSION" = "x2.03" ]; then 57 echo "${MACHINE}-whatever-unixware203"; exit 0 58 elif [ "x$VERSION" = "x2.1.1" ]; then 59 echo "${MACHINE}-whatever-unixware211"; exit 0 60 elif [ "x$VERSION" = "x2.1.2" ]; then 61 echo "${MACHINE}-whatever-unixware212"; exit 0 62 elif [ "x$VERSION" = "x2.1.3" ]; then 63 echo "${MACHINE}-whatever-unixware213"; exit 0 64 else 65 echo "${MACHINE}-whatever-unixware2"; exit 0 66 fi 67 ;; 68 4.2) 69 echo "whatever-whatever-unixware1"; exit 0 70 ;; 71 OpenUNIX) 72 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then 73 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 74 fi 75 ;; 76 5) 77 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then 78 echo "${MACHINE}-sco-unixware7"; exit 0 79 fi 80 ;; 81 esac 82 fi 83fi 84# Now we simply scan though... In most cases, the SYSTEM info is enough 85# 86case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 87 MPE/iX:*) 88 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 89 echo "parisc-hp-MPE/iX"; exit 0 90 ;; 91 A/UX:*) 92 echo "m68k-apple-aux3"; exit 0 93 ;; 94 95 AIX:[3456789]:4:*) 96 echo "${MACHINE}-ibm-aix43"; exit 0 97 ;; 98 99 AIX:*:[56789]:*) 100 echo "${MACHINE}-ibm-aix43"; exit 0 101 ;; 102 103 AIX:*) 104 echo "${MACHINE}-ibm-aix"; exit 0 105 ;; 106 107 dgux:*) 108 echo "${MACHINE}-dg-dgux"; exit 0 109 ;; 110 111 HI-UX:*) 112 echo "${MACHINE}-hi-hiux"; exit 0 113 ;; 114 115 HP-UX:*) 116 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 117 case "$HPUXVER" in 118 11.*) 119 echo "${MACHINE}-hp-hpux11"; exit 0 120 ;; 121 10.*) 122 echo "${MACHINE}-hp-hpux10"; exit 0 123 ;; 124 *) 125 echo "${MACHINE}-hp-hpux"; exit 0 126 ;; 127 esac 128 ;; 129 130 IRIX:5.*) 131 echo "mips2-sgi-irix"; exit 0 132 ;; 133 134 IRIX:6.*) 135 echo "mips3-sgi-irix"; exit 0 136 ;; 137 138 IRIX64:*) 139 echo "mips4-sgi-irix64"; exit 0 140 ;; 141 142 Linux:[2-9].*) 143 echo "${MACHINE}-whatever-linux2"; exit 0 144 ;; 145 146 Linux:1.*) 147 echo "${MACHINE}-whatever-linux1"; exit 0 148 ;; 149 150 LynxOS:*) 151 echo "${MACHINE}-lynx-lynxos"; exit 0 152 ;; 153 154 BSD/OS:4.*) # BSD/OS always says 386 155 echo "i486-whatever-bsdi4"; exit 0 156 ;; 157 158 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 159 case `/sbin/sysctl -n hw.model` in 160 Pentium*) 161 echo "i586-whatever-bsdi"; exit 0 162 ;; 163 *) 164 echo "i386-whatever-bsdi"; exit 0 165 ;; 166 esac; 167 ;; 168 169 BSD/386:*|BSD/OS:*) 170 echo "${MACHINE}-whatever-bsdi"; exit 0 171 ;; 172 173 FreeBSD:*) 174 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 175 MACH=`sysctl -n hw.model` 176 ARCH='whatever' 177 case ${MACH} in 178 *386* ) MACH="i386" ;; 179 *486* ) MACH="i486" ;; 180 Pentium\ II*) MACH="i686" ;; 181 Pentium* ) MACH="i586" ;; 182 Alpha* ) MACH="alpha" ;; 183 * ) MACH="$MACHINE" ;; 184 esac 185 case ${MACH} in 186 i[0-9]86 ) ARCH="pc" ;; 187 esac 188 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 189 ;; 190 191 NetBSD:*:*:*386*) 192 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 193 ;; 194 195 NetBSD:*) 196 echo "${MACHINE}-whatever-netbsd"; exit 0 197 ;; 198 199 OpenBSD:*) 200 echo "${MACHINE}-whatever-openbsd"; exit 0 201 ;; 202 203 OpenUNIX:*) 204 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 205 ;; 206 207 OSF1:*:*:*alpha*) 208 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 209 case "$OSFMAJOR" in 210 4|5) 211 echo "${MACHINE}-dec-tru64"; exit 0 212 ;; 213 1|2|3) 214 echo "${MACHINE}-dec-osf"; exit 0 215 ;; 216 *) 217 echo "${MACHINE}-dec-osf"; exit 0 218 ;; 219 esac 220 ;; 221 222 QNX:*) 223 case "$RELEASE" in 224 4*) 225 echo "${MACHINE}-whatever-qnx4" 226 ;; 227 6*) 228 echo "${MACHINE}-whatever-qnx6" 229 ;; 230 *) 231 echo "${MACHINE}-whatever-qnx" 232 ;; 233 esac 234 exit 0 235 ;; 236 237 Paragon*:*:*:*) 238 echo "i860-intel-osf1"; exit 0 239 ;; 240 241 Rhapsody:*) 242 echo "ppc-apple-rhapsody"; exit 0 243 ;; 244 245 Darwin:*) 246 echo "ppc-apple-darwin"; exit 0 247 ;; 248 249 SunOS:5.*) 250 echo "${MACHINE}-whatever-solaris2"; exit 0 251 ;; 252 253 SunOS:*) 254 echo "${MACHINE}-sun-sunos4"; exit 0 255 ;; 256 257 UNIX_System_V:4.*:*) 258 echo "${MACHINE}-whatever-sysv4"; exit 0 259 ;; 260 261 *:4*:R4*:m88k) 262 echo "${MACHINE}-whatever-sysv4"; exit 0 263 ;; 264 265 DYNIX/ptx:4*:*) 266 echo "${MACHINE}-whatever-sysv4"; exit 0 267 ;; 268 269 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 270 echo "i486-ncr-sysv4"; exit 0 271 ;; 272 273 ULTRIX:*) 274 echo "${MACHINE}-unknown-ultrix"; exit 0 275 ;; 276 277 SINIX*|ReliantUNIX*) 278 echo "${MACHINE}-siemens-sysv4"; exit 0 279 ;; 280 281 POSIX-BC*) 282 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 283 ;; 284 285 machten:*) 286 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 287 ;; 288 289 library:*) 290 echo "${MACHINE}-ncr-sysv4"; exit 0 291 ;; 292 293 ConvexOS:*:11.0:*) 294 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 295 ;; 296 297 NEWS-OS:4.*) 298 echo "mips-sony-newsos4"; exit 0; 299 ;; 300 301 CYGWIN*) 302 case "$RELEASE" in 303 [bB]*|1.0|1.[12].*) 304 echo "${MACHINE}-whatever-cygwin_pre1.3" 305 ;; 306 *) 307 echo "${MACHINE}-whatever-cygwin" 308 ;; 309 esac 310 exit 0 311 ;; 312 313 *"CRAY T3E") 314 echo "t3e-cray-unicosmk"; exit 0; 315 ;; 316 317 *CRAY*) 318 echo "j90-cray-unicos"; exit 0; 319 ;; 320esac 321 322# 323# Ugg. These are all we can determine by what we know about 324# the output of uname. Be more creative: 325# 326 327# Do the Apollo stuff first. Here, we just simply assume 328# that the existance of the /usr/apollo directory is proof 329# enough 330if [ -d /usr/apollo ]; then 331 echo "whatever-apollo-whatever" 332 exit 0 333fi 334 335# Now NeXT 336ISNEXT=`hostinfo 2>/dev/null` 337case "$ISNEXT" in 338 *'NeXT Mach 3.3'*) 339 echo "whatever-next-nextstep3.3"; exit 0 340 ;; 341 *NeXT*) 342 echo "whatever-next-nextstep"; exit 0 343 ;; 344esac 345 346# At this point we gone through all the one's 347# we know of: Punt 348 349echo "${MACHINE}-whatever-${SYSTEM}" 350exit 0 351) 2>/dev/null | ( 352 353# --------------------------------------------------------------------------- 354# this is where the translation occurs into SSLeay terms 355# --------------------------------------------------------------------------- 356 357PREFIX="" 358SUFFIX="" 359TEST="false" 360 361# pick up any command line args to config 362for i 363do 364case "$i" in 365-d*) PREFIX="debug-";; 366-t*) TEST="true";; 367-h*) TEST="true"; cat <<EOF 368Usage: config [options] 369 -d Add a debug- prefix to machine choice. 370 -t Test mode, do not run the Configure perl script. 371 -h This help. 372 373Any other text will be passed to the Configure perl script. 374See INSTALL for instructions. 375 376EOF 377;; 378*) options=$options" $i" ;; 379esac 380done 381 382# figure out if gcc is available and if so we use it otherwise 383# we fallback to whatever cc does on the system 384GCCVER=`(gcc --version) 2>/dev/null` 385if [ "$GCCVER" != "" ]; then 386 CC=gcc 387 # then strip off whatever prefix Cygnus prepends the number with... 388 GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'` 389 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 390 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 391else 392 CC=cc 393fi 394 395if [ "$SYSTEM" = "SunOS" ]; then 396 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 397 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 398 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 399 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 400 CCVER=${CCVER:-0} 401 if [ $CCVER -gt 40 ]; then 402 CC=cc # overrides gcc!!! 403 if [ $CCVER -eq 50 ]; then 404 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 405 echo " patch #107357-01 or later applied." 406 sleep 5 407 fi 408 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then 409 CC=sc3 410 fi 411fi 412 413if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 414 # check for Compaq C, expected output is "blah-blah C Vx.x" 415 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 416 egrep -e '.* C V[0-9]\.[0-9]' | \ 417 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 418 CCCVER=${CCCVER:-0} 419 if [ $CCCVER -gt 60 ]; then 420 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 421 # only on hash routines and des, otherwise gcc (2.95) 422 # keeps along rather tight... 423 fi 424fi 425 426GCCVER=${GCCVER:-0} 427CCVER=${CCVER:-0} 428 429# read the output of the embedded GuessOS 430read GUESSOS 431 432echo Operating system: $GUESSOS 433 434# now map the output into SSLeay terms ... really should hack into the 435# script above so we end up with values in vars but that would take 436# more time that I want to waste at the moment 437case "$GUESSOS" in 438 mips2-sgi-irix) 439 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 440 CPU=${CPU:-0} 441 if [ $CPU -ge 4000 ]; then 442 options="$options -mips2" 443 fi 444 OUT="irix-$CC" 445 ;; 446 mips3-sgi-irix) 447 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 448 CPU=${CPU:-0} 449 if [ $CPU -ge 5000 ]; then 450 options="$options -mips4" 451 else 452 options="$options -mips3" 453 fi 454 OUT="irix-mips3-$CC" 455 ;; 456 mips4-sgi-irix64) 457 echo "WARNING! If you wish to build 64-bit library, then you have to" 458 echo " invoke './Configure irix64-mips4-$CC' *manually*." 459 echo " Type return if you want to continue, Ctrl-C to abort." 460 read waste < /dev/tty 461 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 462 CPU=${CPU:-0} 463 if [ $CPU -ge 5000 ]; then 464 options="$options -mips4" 465 else 466 options="$options -mips3" 467 fi 468 OUT="irix-mips3-$CC" 469 ;; 470 alpha-*-linux2) 471 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo` 472 case ${ISA:-generic} in 473 *[67]) OUT="linux-alpha+bwx-$CC" ;; 474 *) OUT="linux-alpha-$CC" ;; 475 esac 476 if [ "$CC" = "gcc" ]; then 477 case ${ISA:-generic} in 478 EV5|EV45) options="$options -mcpu=ev5";; 479 EV56|PCA56) options="$options -mcpu=ev56";; 480 EV6|EV67|PCA57) options="$options -mcpu=ev6";; 481 esac 482 fi 483 ;; 484 mips-*-linux?) 485 cat >dummy.c <<EOF 486#include <stdio.h> /* for printf() prototype */ 487 int main (argc, argv) int argc; char *argv[]; { 488#ifdef __MIPSEB__ 489 printf ("linux-%s\n", argv[1]); 490#endif 491#ifdef __MIPSEL__ 492 printf ("linux-%sel\n", argv[1]); 493#endif 494 return 0; 495} 496EOF 497 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}` 498 rm dummy dummy.c 499 ;; 500 ppc-*-linux2) OUT="linux-ppc" ;; 501 m68k-*-linux*) OUT="linux-m68k" ;; 502 ia64-*-linux?) OUT="linux-ia64" ;; 503 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 504 ppc-apple-darwin) OUT="darwin-ppc-cc" ;; 505 sparc64-*-linux2) 506 #Before we can uncomment following lines we have to wait at least 507 #till 64-bit glibc for SPARC is operational:-( 508 #echo "WARNING! If you wish to build 64-bit library, then you have to" 509 #echo " invoke './Configure linux64-sparcv9' *manually*." 510 #echo " Type return if you want to continue, Ctrl-C to abort." 511 #read waste < /dev/tty 512 OUT="linux-sparcv9" ;; 513 sparc-*-linux2) 514 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo` 515 case ${KARCH:-sun4} in 516 sun4u*) OUT="linux-sparcv9" ;; 517 sun4m) OUT="linux-sparcv8" ;; 518 sun4d) OUT="linux-sparcv8" ;; 519 *) OUT="linux-sparcv7" ;; 520 esac ;; 521 parisc-*-linux2) 522 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo` 523 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo` 524 525 # ??TODO ?? Model transformations 526 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 527 # assuming no further arch. identification will ever be used by GCC. 528 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 529 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 530 # for these chips in the future. 531 # PA7300LC -> 7100LC (1.1) 532 # PA8200 -> 8000 (2.0) 533 # PA8500 -> 8000 (2.0) 534 # PA8600 -> 8000 (2.0) 535 536 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'` 537 # Finish Model transformations 538 539 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH" 540 OUT="linux-parisc" ;; 541 arm*-*-linux2) OUT="linux-elf-arm" ;; 542 s390-*-linux2) OUT="linux-s390" ;; 543 s390x-*-linux?) OUT="linux-s390x" ;; 544 *-*-linux2) OUT="linux-elf" ;; 545 *-*-linux1) OUT="linux-aout" ;; 546 sun4u*-*-solaris2) 547 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 548 if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then 549 echo "WARNING! If you wish to build 64-bit library, then you have to" 550 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 551 echo " Type return if you want to continue, Ctrl-C to abort." 552 read waste < /dev/tty 553 fi 554 OUT="solaris-sparcv9-$CC" ;; 555 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 556 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 557 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 558 *86*-*-solaris2) OUT="solaris-x86-$CC" ;; 559 *-*-sunos4) OUT="sunos-$CC" ;; 560 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;; 561 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;; 562 *-freebsd[1-2]*) OUT="FreeBSD" ;; 563 *86*-*-netbsd) OUT="NetBSD-x86" ;; 564 sun3*-*-netbsd) OUT="NetBSD-m68" ;; 565 *-*-netbsd) OUT="NetBSD-sparc" ;; 566 *86*-*-openbsd) OUT="OpenBSD-x86" ;; 567 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; 568 pmax*-*-openbsd) OUT="OpenBSD-mips" ;; 569 *-*-openbsd) OUT="OpenBSD" ;; 570 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; 571 *-*-osf) OUT="alphaold-cc" ;; 572 *-*-tru64) OUT="alpha-cc" ;; 573 *-*-OpenUNIX*) 574 if [ "$CC" = "gcc" ]; then 575 OUT="OpenUNIX-8-gcc" 576 else 577 OUT="OpenUNIX-8" 578 fi 579 ;; 580 *-*-unixware7) OUT="unixware-7" ;; 581 *-*-UnixWare7) OUT="unixware-7" ;; 582 *-*-Unixware7) OUT="unixware-7" ;; 583 *-*-unixware20*) OUT="unixware-2.0" ;; 584 *-*-unixware21*) OUT="unixware-2.1" ;; 585 *-*-UnixWare20*) OUT="unixware-2.0" ;; 586 *-*-UnixWare21*) OUT="unixware-2.1" ;; 587 *-*-Unixware20*) OUT="unixware-2.0" ;; 588 *-*-Unixware21*) OUT="unixware-2.1" ;; 589 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 590 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 591 *-siemens-sysv4) OUT="SINIX" ;; 592 *-hpux1*) OUT="hpux-parisc-$CC" 593 options="$options -D_REENTRANT" ;; 594 *-hpux) OUT="hpux-parisc-$CC" ;; 595 # these are all covered by the catchall below 596 # *-aix) OUT="aix-$CC" ;; 597 # *-dgux) OUT="dgux" ;; 598 mips-sony-newsos4) OUT="newsos4-gcc" ;; 599 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 600 *-*-cygwin) OUT="Cygwin" ;; 601 t3e-cray-unicosmk) OUT="cray-t3e" ;; 602 j90-cray-unicos) OUT="cray-j90" ;; 603 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 604esac 605 606# See whether we can compile Atalla support 607if [ -f /usr/include/atasi.h ] 608then 609 options="$options -DATALLA" 610fi 611 612# gcc < 2.8 does not support -mcpu=ultrasparc 613if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 614then 615 echo "WARNING! Do consider upgrading to gcc-2.8 or later." 616 sleep 5 617 OUT=solaris-sparcv9-gcc27 618fi 619if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 620then 621 echo "WARNING! Falling down to 'linux-sparcv8'." 622 echo " Upgrade to gcc-2.8 or later." 623 sleep 5 624 OUT=linux-sparcv8 625fi 626 627case "$GUESSOS" in 628 i386-*) options="$options 386" ;; 629esac 630 631for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha 632do 633 if [ ! -d crypto/$i ] 634 then 635 options="$options no-$i" 636 fi 637done 638 639if [ -z "$OUT" ]; then 640 OUT="$CC" 641fi 642 643if [ ".$PERL" = . ] ; then 644 for i in . `echo $PATH | sed 's/:/ /g'`; do 645 if [ -f "$i/perl5" ] ; then 646 PERL="$i/perl5" 647 break; 648 fi; 649 done 650fi 651 652if [ ".$PERL" = . ] ; then 653 for i in . `echo $PATH | sed 's/:/ /g'`; do 654 if [ -f "$i/perl" ] ; then 655 if "$i/perl" -e 'exit($]<5.0)'; then 656 PERL="$i/perl" 657 break; 658 fi; 659 fi; 660 done 661fi 662 663if [ ".$PERL" = . ] ; then 664 echo "You need Perl 5." 665 exit 1 666fi 667 668# run Configure to check to see if we need to specify the 669# compiler for the platform ... in which case we add it on 670# the end ... otherwise we leave it off 671 672$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 673if [ $? = "0" ]; then 674 OUT="$OUT-$CC" 675fi 676 677OUT="$PREFIX$OUT" 678 679$PERL ./Configure LIST | grep "$OUT" > /dev/null 680if [ $? = "0" ]; then 681 echo Configuring for $OUT 682 683 if [ "$TEST" = "true" ]; then 684 echo $PERL ./Configure $OUT $options 685 else 686 $PERL ./Configure $OUT $options 687 fi 688else 689 echo "This system ($OUT) is not supported. See file INSTALL for details." 690fi 691) 692