t_ra.sh revision 314817
1# $NetBSD: t_ra.sh,v 1.24 2017/01/13 08:11:01 ozaki-r Exp $ 2# 3# Copyright (c) 2015 Internet Initiative Japan Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25# POSSIBILITY OF SUCH DAMAGE. 26# 27 28RUMPSRV=unix://r1 29RUMPSRV1_2=unix://r12 30RUMPCLI=unix://r2 31RUMPSRV3=unix://r3 32RUMPSRV4=unix://r4 33IP6SRV=fc00:1::1 34IP6SRV1_2=fc00:1::2 35IP6SRV_PREFIX=fc00:1: 36IP6CLI=fc00:2::2 37IP6SRV3=fc00:3::1 38IP6SRV3_PREFIX=fc00:3: 39IP6SRV4=fc00:4::1 40IP6SRV4_PREFIX=fc00:4: 41PIDFILE=./rump.rtadvd.pid 42PIDFILE1_2=./rump.rtadvd.pid12 43PIDFILE3=./rump.rtadvd.pid3 44PIDFILE4=./rump.rtadvd.pid4 45CONFIG=./rtadvd.conf 46WAITTIME=2 47DEBUG=${DEBUG:-true} 48 49init_server() 50{ 51 52 export RUMP_SERVER=$1 53 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.forwarding=1 54 export LD_PRELOAD=/usr/lib/librumphijack.so 55 atf_check -s exit:0 mkdir -p /rump/var/chroot/rtadvd 56 unset LD_PRELOAD 57 unset RUMP_SERVER 58} 59 60setup_shmif0() 61{ 62 local sock=$1 63 local IP6ADDR=$2 64 65 rump_server_add_iface $sock shmif0 bus1 66 67 export RUMP_SERVER=$sock 68 atf_check -s exit:0 rump.ifconfig shmif0 inet6 ${IP6ADDR} 69 atf_check -s exit:0 rump.ifconfig shmif0 up 70 atf_check -s exit:0 rump.ifconfig -w 10 71 72 $DEBUG && rump.ifconfig 73} 74 75wait_term() 76{ 77 local PIDFILE=${1} 78 shift 79 80 while [ -f ${PIDFILE} ] 81 do 82 sleep 0.2 83 done 84 85 return 0 86} 87 88create_rtadvdconfig() 89{ 90 91 cat << _EOF > ${CONFIG} 92shmif0:\ 93 :mtu#1300:maxinterval#4:mininterval#3: 94_EOF 95} 96 97start_rtadvd() 98{ 99 local sock=$1 100 local pidfile=$2 101 102 export RUMP_SERVER=$sock 103 atf_check -s exit:0 rump.rtadvd -c ${CONFIG} -p $pidfile shmif0 104 while [ ! -f $pidfile ]; do 105 sleep 0.2 106 done 107 unset RUMP_SERVER 108} 109 110check_entries() 111{ 112 local cli=$1 113 local srv=$2 114 local addr_prefix=$3 115 local mac_srv= ll_srv= 116 117 ll_srv=$(get_linklocal_addr $srv shmif0) 118 mac_srv=$(get_macaddr $srv shmif0) 119 120 export RUMP_SERVER=$cli 121 $DEBUG && dump_entries 122 atf_check -s exit:0 -o match:'if=shmif0' rump.ndp -r 123 atf_check -s exit:0 -o match:'advertised' rump.ndp -p 124 atf_check -s exit:0 -o match:"${ll_srv}%shmif0 \(reachable\)" rump.ndp -p 125 atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0 126 atf_check -s exit:0 \ 127 -o match:"$ll_srv%shmif0 +$mac_srv +shmif0 +(23h59m|1d0h0m)..s S R" \ 128 rump.ndp -n -a 129 atf_check -s exit:0 -o match:$addr_prefix rump.ndp -n -a 130 atf_check -s exit:0 \ 131 -o match:"$addr_prefix.+<(TENTATIVE,)?AUTOCONF>" \ 132 rump.ifconfig shmif0 inet6 133 unset RUMP_SERVER 134} 135 136dump_entries() 137{ 138 139 echo ndp -n -a 140 rump.ndp -n -a 141 echo ndp -p 142 rump.ndp -p 143 echo ndp -r 144 rump.ndp -r 145} 146 147atf_test_case ra_basic cleanup 148ra_basic_head() 149{ 150 151 atf_set "descr" "Tests for basic functions of router advaertisement(RA)" 152 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 153} 154 155ra_basic_body() 156{ 157 158 rump_server_fs_start $RUMPSRV netinet6 159 rump_server_start $RUMPCLI netinet6 160 161 setup_shmif0 ${RUMPSRV} ${IP6SRV} 162 init_server $RUMPSRV 163 164 setup_shmif0 ${RUMPCLI} ${IP6CLI} 165 export RUMP_SERVER=${RUMPCLI} 166 $DEBUG && rump.ndp -n -a 167 atf_check -s exit:0 -o match:'= 0' rump.sysctl net.inet6.ip6.accept_rtadv 168 unset RUMP_SERVER 169 170 create_rtadvdconfig 171 start_rtadvd $RUMPSRV $PIDFILE 172 sleep $WAITTIME 173 174 export RUMP_SERVER=${RUMPCLI} 175 atf_check -s exit:0 -o empty rump.ndp -r 176 atf_check -s exit:0 -o not-match:'advertised' rump.ndp -p 177 atf_check -s exit:0 -o match:'linkmtu=0' rump.ndp -n -i shmif0 178 atf_check -s exit:0 -o not-match:'S R' rump.ndp -n -a 179 atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a 180 atf_check -s exit:0 -o not-match:'fc00:1:' rump.ifconfig shmif0 inet6 181 unset RUMP_SERVER 182 183 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 184 wait_term ${PIDFILE} 185 186 export RUMP_SERVER=${RUMPCLI} 187 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 188 unset RUMP_SERVER 189 190 start_rtadvd $RUMPSRV $PIDFILE 191 sleep $WAITTIME 192 193 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 194 195 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 196 wait_term ${PIDFILE} 197 198 rump_server_destroy_ifaces 199} 200 201ra_basic_cleanup() 202{ 203 204 if [ -f ${PIDFILE} ]; then 205 kill -TERM `cat ${PIDFILE}` 206 wait_term ${PIDFILE} 207 fi 208 209 $DEBUG && dump 210 cleanup 211} 212 213atf_test_case ra_flush_prefix_entries cleanup 214ra_flush_prefix_entries_head() 215{ 216 217 atf_set "descr" "Tests for flushing prefixes (ndp -P)" 218 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 219} 220 221ra_flush_prefix_entries_body() 222{ 223 224 rump_server_fs_start $RUMPSRV netinet6 225 rump_server_start $RUMPCLI netinet6 226 227 setup_shmif0 ${RUMPSRV} ${IP6SRV} 228 setup_shmif0 ${RUMPCLI} ${IP6CLI} 229 230 init_server $RUMPSRV 231 232 create_rtadvdconfig 233 234 export RUMP_SERVER=${RUMPCLI} 235 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 236 unset RUMP_SERVER 237 238 start_rtadvd $RUMPSRV $PIDFILE 239 sleep $WAITTIME 240 241 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 242 243 export RUMP_SERVER=${RUMPCLI} 244 245 # Terminate rtadvd to prevent new RA messages from coming 246 # Note that ifconfig down; kill -TERM doesn't work 247 kill -KILL `cat ${PIDFILE}` 248 249 # Flush all the entries in the prefix list 250 atf_check -s exit:0 rump.ndp -P 251 252 $DEBUG && dump_entries 253 atf_check -s exit:0 -o match:'if=shmif0' rump.ndp -r 254 atf_check -s exit:0 -o empty rump.ndp -p 255 atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0 256 atf_check -s exit:0 -o match:'(23h59m|1d0h0m)..s S R' rump.ndp -n -a 257 atf_check -s exit:0 -o match:'fc00:1:' rump.ndp -n -a 258 atf_check -s exit:0 -o not-match:'fc00:1:' rump.ifconfig shmif0 inet6 259 unset RUMP_SERVER 260 261 rump_server_destroy_ifaces 262} 263 264ra_flush_prefix_entries_cleanup() 265{ 266 267 $DEBUG && dump 268 cleanup 269} 270 271atf_test_case ra_flush_defrouter_entries cleanup 272ra_flush_defrouter_entries_head() 273{ 274 275 atf_set "descr" "Tests for flushing default routers (ndp -R)" 276 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 277} 278 279ra_flush_defrouter_entries_body() 280{ 281 282 rump_server_fs_start $RUMPSRV netinet6 283 rump_server_start $RUMPCLI netinet6 284 285 setup_shmif0 ${RUMPSRV} ${IP6SRV} 286 setup_shmif0 ${RUMPCLI} ${IP6CLI} 287 288 init_server $RUMPSRV 289 290 create_rtadvdconfig 291 292 export RUMP_SERVER=${RUMPCLI} 293 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 294 unset RUMP_SERVER 295 296 start_rtadvd $RUMPSRV $PIDFILE 297 sleep $WAITTIME 298 299 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 300 301 export RUMP_SERVER=${RUMPCLI} 302 303 # Terminate rtadvd to prevent new RA messages from coming 304 # Note that ifconfig down; kill -TERM doesn't work 305 kill -KILL `cat ${PIDFILE}` 306 307 # Flush all the entries in the default router list 308 atf_check -s exit:0 rump.ndp -R 309 310 $DEBUG && dump_entries 311 atf_check -s exit:0 -o empty rump.ndp -r 312 atf_check -s exit:0 -o match:'No advertising router' rump.ndp -p 313 atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0 314 atf_check -s exit:0 -o match:'(23h59m|1d0h0m)..s S R' rump.ndp -n -a 315 atf_check -s exit:0 -o match:'fc00:1:' rump.ndp -n -a 316 atf_check -s exit:0 -o match:'fc00:1:' rump.ifconfig shmif0 inet6 317 unset RUMP_SERVER 318 319 rump_server_destroy_ifaces 320} 321 322ra_flush_defrouter_entries_cleanup() 323{ 324 325 $DEBUG && dump 326 cleanup 327} 328 329atf_test_case ra_delete_address cleanup 330ra_delete_address_head() 331{ 332 333 atf_set "descr" "Tests for deleting auto-configured address" 334 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 335} 336 337ra_delete_address_body() 338{ 339 340 rump_server_fs_start $RUMPSRV netinet6 341 rump_server_start $RUMPCLI netinet6 342 343 setup_shmif0 ${RUMPSRV} ${IP6SRV} 344 setup_shmif0 ${RUMPCLI} ${IP6CLI} 345 346 init_server $RUMPSRV 347 348 create_rtadvdconfig 349 350 export RUMP_SERVER=${RUMPCLI} 351 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 352 unset RUMP_SERVER 353 354 start_rtadvd $RUMPSRV $PIDFILE 355 sleep $WAITTIME 356 357 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 358 359 export RUMP_SERVER=${RUMPCLI} 360 $DEBUG && rump.ifconfig shmif0 361 atf_check -s exit:0 rump.ifconfig shmif0 inet6 \ 362 $(rump.ifconfig shmif0 |awk '/AUTOCONF/ {print $2}') delete 363 unset RUMP_SERVER 364 365 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 366 wait_term ${PIDFILE} 367 368 rump_server_destroy_ifaces 369} 370 371ra_delete_address_cleanup() 372{ 373 374 if [ -f ${PIDFILE} ]; then 375 kill -TERM `cat ${PIDFILE}` 376 wait_term ${PIDFILE} 377 fi 378 379 $DEBUG && dump 380 cleanup 381} 382 383atf_test_case ra_multiple_routers cleanup 384ra_multiple_routers_head() 385{ 386 387 atf_set "descr" "Tests for multiple routers" 388 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 389} 390 391ra_multiple_routers_body() 392{ 393 local n= 394 395 rump_server_fs_start $RUMPSRV netinet6 396 rump_server_fs_start $RUMPSRV3 netinet6 397 rump_server_start $RUMPCLI netinet6 398 399 setup_shmif0 ${RUMPSRV} ${IP6SRV} 400 setup_shmif0 ${RUMPSRV3} ${IP6SRV3} 401 setup_shmif0 ${RUMPCLI} ${IP6CLI} 402 403 init_server $RUMPSRV 404 init_server $RUMPSRV3 405 406 create_rtadvdconfig 407 408 export RUMP_SERVER=${RUMPCLI} 409 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 410 unset RUMP_SERVER 411 412 start_rtadvd $RUMPSRV $PIDFILE 413 start_rtadvd $RUMPSRV3 $PIDFILE3 414 sleep $WAITTIME 415 416 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 417 check_entries $RUMPCLI $RUMPSRV3 $IP6SRV3_PREFIX 418 419 export RUMP_SERVER=$RUMPCLI 420 # Two prefixes are advertised by differnt two routers 421 n=$(rump.ndp -p |grep 'advertised by' |wc -l) 422 atf_check_equal $n 2 423 unset RUMP_SERVER 424 425 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 426 wait_term ${PIDFILE} 427 atf_check -s exit:0 kill -TERM `cat ${PIDFILE3}` 428 wait_term ${PIDFILE3} 429 430 rump_server_destroy_ifaces 431} 432 433ra_multiple_routers_cleanup() 434{ 435 436 if [ -f ${PIDFILE} ]; then 437 kill -TERM `cat ${PIDFILE}` 438 wait_term ${PIDFILE} 439 fi 440 if [ -f ${PIDFILE3} ]; then 441 kill -TERM `cat ${PIDFILE3}` 442 wait_term ${PIDFILE3} 443 fi 444 445 $DEBUG && dump 446 cleanup 447} 448 449atf_test_case ra_multiple_routers_single_prefix cleanup 450ra_multiple_routers_single_prefix_head() 451{ 452 453 atf_set "descr" "Tests for multiple routers with a single prefix" 454 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 455} 456 457ra_multiple_routers_single_prefix_body() 458{ 459 local n= 460 461 rump_server_fs_start $RUMPSRV netinet6 462 rump_server_fs_start $RUMPSRV1_2 netinet6 463 rump_server_start $RUMPCLI netinet6 464 465 setup_shmif0 ${RUMPSRV} ${IP6SRV} 466 setup_shmif0 ${RUMPSRV1_2} ${IP6SRV1_2} 467 setup_shmif0 ${RUMPCLI} ${IP6CLI} 468 469 init_server $RUMPSRV 470 init_server $RUMPSRV1_2 471 472 create_rtadvdconfig 473 474 export RUMP_SERVER=${RUMPCLI} 475 atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1 476 unset RUMP_SERVER 477 478 start_rtadvd $RUMPSRV $PIDFILE 479 start_rtadvd $RUMPSRV1_2 $PIDFILE1_2 480 sleep $WAITTIME 481 482 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 483 check_entries $RUMPCLI $RUMPSRV1_2 $IP6SRV_PREFIX 484 485 export RUMP_SERVER=$RUMPCLI 486 # One prefix is advertised by differnt two routers 487 n=$(rump.ndp -p |grep 'advertised by' |wc -l) 488 atf_check_equal $n 1 489 unset RUMP_SERVER 490 491 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 492 wait_term ${PIDFILE} 493 atf_check -s exit:0 kill -TERM `cat ${PIDFILE1_2}` 494 wait_term ${PIDFILE1_2} 495 496 rump_server_destroy_ifaces 497} 498 499ra_multiple_routers_single_prefix_cleanup() 500{ 501 502 if [ -f ${PIDFILE} ]; then 503 kill -TERM `cat ${PIDFILE}` 504 wait_term ${PIDFILE} 505 fi 506 if [ -f ${PIDFILE1_2} ]; then 507 kill -TERM `cat ${PIDFILE1_2}` 508 wait_term ${PIDFILE1_2} 509 fi 510 511 $DEBUG && dump 512 cleanup 513} 514 515atf_test_case ra_multiple_routers_maxifprefixes cleanup 516ra_multiple_routers_maxifprefixes_head() 517{ 518 519 atf_set "descr" "Tests for exceeding the number of maximum prefixes" 520 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 521} 522 523ra_multiple_routers_maxifprefixes_body() 524{ 525 local n= 526 527 rump_server_fs_start $RUMPSRV netinet6 528 rump_server_fs_start $RUMPSRV3 netinet6 529 rump_server_fs_start $RUMPSRV4 netinet6 530 rump_server_start $RUMPCLI netinet6 531 532 setup_shmif0 ${RUMPSRV} ${IP6SRV} 533 setup_shmif0 ${RUMPSRV3} ${IP6SRV3} 534 setup_shmif0 ${RUMPSRV4} ${IP6SRV4} 535 setup_shmif0 ${RUMPCLI} ${IP6CLI} 536 537 init_server $RUMPSRV 538 init_server $RUMPSRV3 539 init_server $RUMPSRV4 540 541 create_rtadvdconfig 542 543 export RUMP_SERVER=${RUMPCLI} 544 atf_check -s exit:0 -o match:'0.->.1' \ 545 rump.sysctl -w net.inet6.ip6.accept_rtadv=1 546 # Limit the maximum number of prefix entries to 2 547 atf_check -s exit:0 -o match:'16.->.2' \ 548 rump.sysctl -w net.inet6.ip6.maxifprefixes=2 549 unset RUMP_SERVER 550 551 start_rtadvd $RUMPSRV $PIDFILE 552 start_rtadvd $RUMPSRV3 $PIDFILE3 553 sleep $WAITTIME 554 555 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 556 check_entries $RUMPCLI $RUMPSRV3 $IP6SRV3_PREFIX 557 558 start_rtadvd $RUMPSRV4 $PIDFILE4 559 sleep $WAITTIME 560 561 export RUMP_SERVER=${RUMPCLI} 562 $DEBUG && dump_entries 563 # There should remain two prefixes 564 n=$(rump.ndp -p |grep 'advertised by' |wc -l) 565 atf_check_equal $n 2 566 # TODO check other conditions 567 unset RUMP_SERVER 568 569 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 570 wait_term ${PIDFILE} 571 atf_check -s exit:0 kill -TERM `cat ${PIDFILE3}` 572 wait_term ${PIDFILE3} 573 atf_check -s exit:0 kill -TERM `cat ${PIDFILE4}` 574 wait_term ${PIDFILE4} 575 576 rump_server_destroy_ifaces 577} 578 579ra_multiple_routers_maxifprefixes_cleanup() 580{ 581 582 if [ -f ${PIDFILE} ]; then 583 kill -TERM `cat ${PIDFILE}` 584 wait_term ${PIDFILE} 585 fi 586 if [ -f ${PIDFILE3} ]; then 587 kill -TERM `cat ${PIDFILE3}` 588 wait_term ${PIDFILE3} 589 fi 590 if [ -f ${PIDFILE4} ]; then 591 kill -TERM `cat ${PIDFILE4}` 592 wait_term ${PIDFILE4} 593 fi 594 595 $DEBUG && dump 596 cleanup 597} 598 599atf_test_case ra_temporary_address cleanup 600ra_temporary_address_head() 601{ 602 603 atf_set "descr" "Tests for IPv6 temporary address" 604 atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig" 605} 606 607check_echo_request_pkt() 608{ 609 local pkt="$2 > $3: .+ echo request" 610 611 extract_new_packets $1 > ./out 612 $DEBUG && echo $pkt 613 $DEBUG && cat ./out 614 atf_check -s exit:0 -o match:"$pkt" cat ./out 615} 616 617ra_temporary_address_body() 618{ 619 local ip_auto= ip_temp= 620 621 rump_server_fs_start $RUMPSRV netinet6 622 rump_server_start $RUMPCLI netinet6 623 624 setup_shmif0 $RUMPSRV $IP6SRV 625 init_server $RUMPSRV 626 setup_shmif0 $RUMPCLI $IP6CLI 627 628 export RUMP_SERVER=$RUMPCLI 629 atf_check -s exit:0 -o match:'0.->.1' \ 630 rump.sysctl -w net.inet6.ip6.accept_rtadv=1 631 atf_check -s exit:0 -o match:'0.->.1' \ 632 rump.sysctl -w net.inet6.ip6.use_tempaddr=1 633 unset RUMP_SERVER 634 635 create_rtadvdconfig 636 start_rtadvd $RUMPSRV $PIDFILE 637 sleep $WAITTIME 638 639 check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX 640 641 export RUMP_SERVER=$RUMPCLI 642 643 # Check temporary address 644 atf_check -s exit:0 \ 645 -o match:"$IP6SRV_PREFIX.+<(TENTATIVE,)?AUTOCONF,TEMPORARY>" \ 646 rump.ifconfig shmif0 inet6 647 648 # 649 # Testing net.inet6.ip6.prefer_tempaddr 650 # 651 atf_check -s exit:0 rump.ifconfig -w 10 652 $DEBUG && rump.ifconfig shmif0 653 ip_auto=$(rump.ifconfig shmif0 |awk '/<AUTOCONF>/ {sub(/\/[0-9]*/, ""); print $2;}') 654 ip_temp=$(rump.ifconfig shmif0 |awk '/<AUTOCONF,TEMPORARY>/ {sub(/\/[0-9]*/, ""); print $2;}') 655 $DEBUG && echo $ip_auto $ip_temp 656 657 # Ignore old packets 658 extract_new_packets bus1 > /dev/null 659 660 atf_check -s exit:0 -o ignore rump.ping6 -n -X 2 -c 1 $IP6SRV 661 # autoconf (non-temporal) address should be used as the source address 662 check_echo_request_pkt bus1 $ip_auto $IP6SRV 663 664 # Enable net.inet6.ip6.prefer_tempaddr 665 atf_check -s exit:0 -o match:'0.->.1' \ 666 rump.sysctl -w net.inet6.ip6.prefer_tempaddr=1 667 668 atf_check -s exit:0 -o ignore rump.ping6 -n -X 2 -c 1 $IP6SRV 669 # autoconf, temporal address should be used as the source address 670 check_echo_request_pkt bus1 $ip_temp $IP6SRV 671 672 unset RUMP_SERVER 673 674 atf_check -s exit:0 kill -TERM `cat ${PIDFILE}` 675 wait_term $PIDFILE 676 677 rump_server_destroy_ifaces 678} 679 680ra_temporary_address_cleanup() 681{ 682 683 if [ -f ${PIDFILE} ]; then 684 kill -TERM `cat ${PIDFILE}` 685 wait_term ${PIDFILE} 686 fi 687 688 $DEBUG && dump 689 cleanup 690} 691 692atf_init_test_cases() 693{ 694 695 atf_add_test_case ra_basic 696 atf_add_test_case ra_flush_prefix_entries 697 atf_add_test_case ra_flush_defrouter_entries 698 atf_add_test_case ra_delete_address 699 atf_add_test_case ra_multiple_routers 700 atf_add_test_case ra_multiple_routers_single_prefix 701 atf_add_test_case ra_multiple_routers_maxifprefixes 702 atf_add_test_case ra_temporary_address 703} 704