1/************************************************* 2* Perl-Compatible Regular Expressions * 3*************************************************/ 4 5 6/* PCRE is a library of functions to support regular expressions whose syntax 7and semantics are as close as possible to those of the Perl 5 language. 8 9 Written by Philip Hazel 10 Copyright (c) 1997-2016 University of Cambridge 11 12----------------------------------------------------------------------------- 13Redistribution and use in source and binary forms, with or without 14modification, are permitted provided that the following conditions are met: 15 16 * Redistributions of source code must retain the above copyright notice, 17 this list of conditions and the following disclaimer. 18 19 * Redistributions in binary form must reproduce the above copyright 20 notice, this list of conditions and the following disclaimer in the 21 documentation and/or other materials provided with the distribution. 22 23 * Neither the name of the University of Cambridge nor the names of its 24 contributors may be used to endorse or promote products derived from 25 this software without specific prior written permission. 26 27THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 28AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 29IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 30ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 31LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37POSSIBILITY OF SUCH DAMAGE. 38----------------------------------------------------------------------------- 39*/ 40 41/* This header contains definitions that are shared between the different 42modules, but which are not relevant to the exported API. This includes some 43functions whose names all begin with "_pcre_", "_pcre16_" or "_pcre32_" 44depending on the PRIV macro. */ 45 46#ifndef PCRE_INTERNAL_H 47#define PCRE_INTERNAL_H 48 49/* Define PCRE_DEBUG to get debugging output on stdout. */ 50 51#if 0 52#define PCRE_DEBUG 53#endif 54 55/* PCRE is compiled as an 8 bit library if it is not requested otherwise. */ 56 57#if !defined COMPILE_PCRE16 && !defined COMPILE_PCRE32 58#define COMPILE_PCRE8 59#endif 60 61/* If SUPPORT_UCP is defined, SUPPORT_UTF must also be defined. The 62"configure" script ensures this, but not everybody uses "configure". */ 63 64#if defined SUPPORT_UCP && !(defined SUPPORT_UTF) 65#define SUPPORT_UTF 1 66#endif 67 68/* We define SUPPORT_UTF if SUPPORT_UTF8 is enabled for compatibility 69reasons with existing code. */ 70 71#if defined SUPPORT_UTF8 && !(defined SUPPORT_UTF) 72#define SUPPORT_UTF 1 73#endif 74 75/* Fixme: SUPPORT_UTF8 should be eventually disappear from the code. 76Until then we define it if SUPPORT_UTF is defined. */ 77 78#if defined SUPPORT_UTF && !(defined SUPPORT_UTF8) 79#define SUPPORT_UTF8 1 80#endif 81 82/* We do not support both EBCDIC and UTF-8/16/32 at the same time. The "configure" 83script prevents both being selected, but not everybody uses "configure". */ 84 85#if defined EBCDIC && defined SUPPORT_UTF 86#error The use of both EBCDIC and SUPPORT_UTF is not supported. 87#endif 88 89/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef 90inline, and there are *still* stupid compilers about that don't like indented 91pre-processor statements, or at least there were when I first wrote this. After 92all, it had only been about 10 years then... 93 94It turns out that the Mac Debugging.h header also defines the macro DPRINTF, so 95be absolutely sure we get our version. */ 96 97#undef DPRINTF 98#ifdef PCRE_DEBUG 99#define DPRINTF(p) printf p 100#else 101#define DPRINTF(p) /* Nothing */ 102#endif 103 104 105/* Standard C headers plus the external interface definition. The only time 106setjmp and stdarg are used is when NO_RECURSE is set. */ 107 108#include <ctype.h> 109#include <limits.h> 110#include <stddef.h> 111#include <stdio.h> 112#include <stdlib.h> 113#include <string.h> 114 115/* Valgrind (memcheck) support */ 116 117#ifdef SUPPORT_VALGRIND 118#include <valgrind/memcheck.h> 119#endif 120 121/* When compiling a DLL for Windows, the exported symbols have to be declared 122using some MS magic. I found some useful information on this web page: 123http://msdn2.microsoft.com/en-us/library/y4h7bcy6(VS.80).aspx. According to the 124information there, using __declspec(dllexport) without "extern" we have a 125definition; with "extern" we have a declaration. The settings here override the 126setting in pcre.h (which is included below); it defines only PCRE_EXP_DECL, 127which is all that is needed for applications (they just import the symbols). We 128use: 129 130 PCRE_EXP_DECL for declarations 131 PCRE_EXP_DEFN for definitions of exported functions 132 PCRE_EXP_DATA_DEFN for definitions of exported variables 133 134The reason for the two DEFN macros is that in non-Windows environments, one 135does not want to have "extern" before variable definitions because it leads to 136compiler warnings. So we distinguish between functions and variables. In 137Windows, the two should always be the same. 138 139The reason for wrapping this in #ifndef PCRE_EXP_DECL is so that pcretest, 140which is an application, but needs to import this file in order to "peek" at 141internals, can #include pcre.h first to get an application's-eye view. 142 143In principle, people compiling for non-Windows, non-Unix-like (i.e. uncommon, 144special-purpose environments) might want to stick other stuff in front of 145exported symbols. That's why, in the non-Windows case, we set PCRE_EXP_DEFN and 146PCRE_EXP_DATA_DEFN only if they are not already set. */ 147 148#ifndef PCRE_EXP_DECL 149# ifdef _WIN32 150# ifndef PCRE_STATIC 151# define PCRE_EXP_DECL extern __declspec(dllexport) 152# define PCRE_EXP_DEFN __declspec(dllexport) 153# define PCRE_EXP_DATA_DEFN __declspec(dllexport) 154# else 155# define PCRE_EXP_DECL extern 156# define PCRE_EXP_DEFN 157# define PCRE_EXP_DATA_DEFN 158# endif 159# else 160# ifdef __cplusplus 161# define PCRE_EXP_DECL extern "C" 162# else 163# define PCRE_EXP_DECL extern 164# endif 165# ifndef PCRE_EXP_DEFN 166# define PCRE_EXP_DEFN PCRE_EXP_DECL 167# endif 168# ifndef PCRE_EXP_DATA_DEFN 169# define PCRE_EXP_DATA_DEFN 170# endif 171# endif 172#endif 173 174/* When compiling with the MSVC compiler, it is sometimes necessary to include 175a "calling convention" before exported function names. (This is secondhand 176information; I know nothing about MSVC myself). For example, something like 177 178 void __cdecl function(....) 179 180might be needed. In order so make this easy, all the exported functions have 181PCRE_CALL_CONVENTION just before their names. It is rarely needed; if not 182set, we ensure here that it has no effect. */ 183 184#ifndef PCRE_CALL_CONVENTION 185#define PCRE_CALL_CONVENTION 186#endif 187 188/* We need to have types that specify unsigned 8, 16 and 32-bit integers. We 189cannot determine these outside the compilation (e.g. by running a program as 190part of "configure") because PCRE is often cross-compiled for use on other 191systems. Instead we make use of the maximum sizes that are available at 192preprocessor time in standard C environments. */ 193 194typedef unsigned char pcre_uint8; 195 196#if USHRT_MAX == 65535 197typedef unsigned short pcre_uint16; 198typedef short pcre_int16; 199#define PCRE_UINT16_MAX USHRT_MAX 200#define PCRE_INT16_MAX SHRT_MAX 201#elif UINT_MAX == 65535 202typedef unsigned int pcre_uint16; 203typedef int pcre_int16; 204#define PCRE_UINT16_MAX UINT_MAX 205#define PCRE_INT16_MAX INT_MAX 206#else 207#error Cannot determine a type for 16-bit integers 208#endif 209 210#if UINT_MAX == 4294967295U 211typedef unsigned int pcre_uint32; 212typedef int pcre_int32; 213#define PCRE_UINT32_MAX UINT_MAX 214#define PCRE_INT32_MAX INT_MAX 215#elif ULONG_MAX == 4294967295UL 216typedef unsigned long int pcre_uint32; 217typedef long int pcre_int32; 218#define PCRE_UINT32_MAX ULONG_MAX 219#define PCRE_INT32_MAX LONG_MAX 220#else 221#error Cannot determine a type for 32-bit integers 222#endif 223 224/* When checking for integer overflow in pcre_compile(), we need to handle 225large integers. If a 64-bit integer type is available, we can use that. 226Otherwise we have to cast to double, which of course requires floating point 227arithmetic. Handle this by defining a macro for the appropriate type. If 228stdint.h is available, include it; it may define INT64_MAX. Systems that do not 229have stdint.h (e.g. Solaris) may have inttypes.h. The macro int64_t may be set 230by "configure". */ 231 232#if defined HAVE_STDINT_H 233#include <stdint.h> 234#elif defined HAVE_INTTYPES_H 235#include <inttypes.h> 236#endif 237 238#if defined INT64_MAX || defined int64_t 239#define INT64_OR_DOUBLE int64_t 240#else 241#define INT64_OR_DOUBLE double 242#endif 243 244/* All character handling must be done as unsigned characters. Otherwise there 245are problems with top-bit-set characters and functions such as isspace(). 246However, we leave the interface to the outside world as char * or short *, 247because that should make things easier for callers. This character type is 248called pcre_uchar. 249 250The IN_UCHARS macro multiply its argument with the byte size of the current 251pcre_uchar type. Useful for memcpy and such operations, whose require the 252byte size of their input/output buffers. 253 254The MAX_255 macro checks whether its pcre_uchar input is less than 256. 255 256The TABLE_GET macro is designed for accessing elements of tables whose contain 257exactly 256 items. When the character is able to contain more than 256 258items, some check is needed before accessing these tables. 259*/ 260 261#if defined COMPILE_PCRE8 262 263typedef unsigned char pcre_uchar; 264#define IN_UCHARS(x) (x) 265#define MAX_255(c) 1 266#define TABLE_GET(c, table, default) ((table)[c]) 267 268#elif defined COMPILE_PCRE16 269 270#if USHRT_MAX != 65535 271/* This is a warning message. Change PCRE_UCHAR16 to a 16 bit data type in 272pcre.h(.in) and disable (comment out) this message. */ 273#error Warning: PCRE_UCHAR16 is not a 16 bit data type. 274#endif 275 276typedef pcre_uint16 pcre_uchar; 277#define UCHAR_SHIFT (1) 278#define IN_UCHARS(x) ((x) * 2) 279#define MAX_255(c) ((c) <= 255u) 280#define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default)) 281 282#elif defined COMPILE_PCRE32 283 284typedef pcre_uint32 pcre_uchar; 285#define UCHAR_SHIFT (2) 286#define IN_UCHARS(x) ((x) * 4) 287#define MAX_255(c) ((c) <= 255u) 288#define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default)) 289 290#else 291#error Unsupported compiling mode 292#endif /* COMPILE_PCRE[8|16|32] */ 293 294/* This is an unsigned int value that no character can ever have. UTF-8 295characters only go up to 0x7fffffff (though Unicode doesn't go beyond 2960x0010ffff). */ 297 298#define NOTACHAR 0xffffffff 299 300/* PCRE is able to support several different kinds of newline (CR, LF, CRLF, 301"any" and "anycrlf" at present). The following macros are used to package up 302testing for newlines. NLBLOCK, PSSTART, and PSEND are defined in the various 303modules to indicate in which datablock the parameters exist, and what the 304start/end of string field names are. */ 305 306#define NLTYPE_FIXED 0 /* Newline is a fixed length string */ 307#define NLTYPE_ANY 1 /* Newline is any Unicode line ending */ 308#define NLTYPE_ANYCRLF 2 /* Newline is CR, LF, or CRLF */ 309 310/* This macro checks for a newline at the given position */ 311 312#define IS_NEWLINE(p) \ 313 ((NLBLOCK->nltype != NLTYPE_FIXED)? \ 314 ((p) < NLBLOCK->PSEND && \ 315 PRIV(is_newline)((p), NLBLOCK->nltype, NLBLOCK->PSEND, \ 316 &(NLBLOCK->nllen), utf)) \ 317 : \ 318 ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \ 319 UCHAR21TEST(p) == NLBLOCK->nl[0] && \ 320 (NLBLOCK->nllen == 1 || UCHAR21TEST(p+1) == NLBLOCK->nl[1]) \ 321 ) \ 322 ) 323 324/* This macro checks for a newline immediately preceding the given position */ 325 326#define WAS_NEWLINE(p) \ 327 ((NLBLOCK->nltype != NLTYPE_FIXED)? \ 328 ((p) > NLBLOCK->PSSTART && \ 329 PRIV(was_newline)((p), NLBLOCK->nltype, NLBLOCK->PSSTART, \ 330 &(NLBLOCK->nllen), utf)) \ 331 : \ 332 ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \ 333 UCHAR21TEST(p - NLBLOCK->nllen) == NLBLOCK->nl[0] && \ 334 (NLBLOCK->nllen == 1 || UCHAR21TEST(p - NLBLOCK->nllen + 1) == NLBLOCK->nl[1]) \ 335 ) \ 336 ) 337 338/* When PCRE is compiled as a C++ library, the subject pointer can be replaced 339with a custom type. This makes it possible, for example, to allow pcre_exec() 340to process subject strings that are discontinuous by using a smart pointer 341class. It must always be possible to inspect all of the subject string in 342pcre_exec() because of the way it backtracks. Two macros are required in the 343normal case, for sign-unspecified and unsigned char pointers. The former is 344used for the external interface and appears in pcre.h, which is why its name 345must begin with PCRE_. */ 346 347#ifdef CUSTOM_SUBJECT_PTR 348#define PCRE_PUCHAR CUSTOM_SUBJECT_PTR 349#else 350#define PCRE_PUCHAR const pcre_uchar * 351#endif 352 353/* Include the public PCRE header and the definitions of UCP character property 354values. */ 355 356#include "pcre.h" 357#include "ucp.h" 358 359#ifdef COMPILE_PCRE32 360/* Assert that the public PCRE_UCHAR32 is a 32-bit type */ 361typedef int __assert_pcre_uchar32_size[sizeof(PCRE_UCHAR32) == 4 ? 1 : -1]; 362#endif 363 364/* When compiling for use with the Virtual Pascal compiler, these functions 365need to have their names changed. PCRE must be compiled with the -DVPCOMPAT 366option on the command line. */ 367 368#ifdef VPCOMPAT 369#define strlen(s) _strlen(s) 370#define strncmp(s1,s2,m) _strncmp(s1,s2,m) 371#define memcmp(s,c,n) _memcmp(s,c,n) 372#define memcpy(d,s,n) _memcpy(d,s,n) 373#define memmove(d,s,n) _memmove(d,s,n) 374#define memset(s,c,n) _memset(s,c,n) 375#else /* VPCOMPAT */ 376 377/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(), 378define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY 379is set. Otherwise, include an emulating function for those systems that have 380neither (there some non-Unix environments where this is the case). */ 381 382#ifndef HAVE_MEMMOVE 383#undef memmove /* some systems may have a macro */ 384#ifdef HAVE_BCOPY 385#define memmove(a, b, c) bcopy(b, a, c) 386#else /* HAVE_BCOPY */ 387static void * 388pcre_memmove(void *d, const void *s, size_t n) 389{ 390size_t i; 391unsigned char *dest = (unsigned char *)d; 392const unsigned char *src = (const unsigned char *)s; 393if (dest > src) 394 { 395 dest += n; 396 src += n; 397 for (i = 0; i < n; ++i) *(--dest) = *(--src); 398 return (void *)dest; 399 } 400else 401 { 402 for (i = 0; i < n; ++i) *dest++ = *src++; 403 return (void *)(dest - n); 404 } 405} 406#define memmove(a, b, c) pcre_memmove(a, b, c) 407#endif /* not HAVE_BCOPY */ 408#endif /* not HAVE_MEMMOVE */ 409#endif /* not VPCOMPAT */ 410 411 412/* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored 413in big-endian order) by default. These are used, for example, to link from the 414start of a subpattern to its alternatives and its end. The use of 2 bytes per 415offset limits the size of the compiled regex to around 64K, which is big enough 416for almost everybody. However, I received a request for an even bigger limit. 417For this reason, and also to make the code easier to maintain, the storing and 418loading of offsets from the byte string is now handled by the macros that are 419defined here. 420 421The macros are controlled by the value of LINK_SIZE. This defaults to 2 in 422the config.h file, but can be overridden by using -D on the command line. This 423is automated on Unix systems via the "configure" command. */ 424 425#if defined COMPILE_PCRE8 426 427#if LINK_SIZE == 2 428 429#define PUT(a,n,d) \ 430 (a[n] = (d) >> 8), \ 431 (a[(n)+1] = (d) & 255) 432 433#define GET(a,n) \ 434 (((a)[n] << 8) | (a)[(n)+1]) 435 436#define MAX_PATTERN_SIZE (1 << 16) 437 438 439#elif LINK_SIZE == 3 440 441#define PUT(a,n,d) \ 442 (a[n] = (d) >> 16), \ 443 (a[(n)+1] = (d) >> 8), \ 444 (a[(n)+2] = (d) & 255) 445 446#define GET(a,n) \ 447 (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2]) 448 449#define MAX_PATTERN_SIZE (1 << 24) 450 451 452#elif LINK_SIZE == 4 453 454#define PUT(a,n,d) \ 455 (a[n] = (d) >> 24), \ 456 (a[(n)+1] = (d) >> 16), \ 457 (a[(n)+2] = (d) >> 8), \ 458 (a[(n)+3] = (d) & 255) 459 460#define GET(a,n) \ 461 (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3]) 462 463/* Keep it positive */ 464#define MAX_PATTERN_SIZE (1 << 30) 465 466#else 467#error LINK_SIZE must be either 2, 3, or 4 468#endif 469 470#elif defined COMPILE_PCRE16 471 472#if LINK_SIZE == 2 473 474/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */ 475#undef LINK_SIZE 476#define LINK_SIZE 1 477 478#define PUT(a,n,d) \ 479 (a[n] = (d)) 480 481#define GET(a,n) \ 482 (a[n]) 483 484#define MAX_PATTERN_SIZE (1 << 16) 485 486#elif LINK_SIZE == 3 || LINK_SIZE == 4 487 488/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */ 489#undef LINK_SIZE 490#define LINK_SIZE 2 491 492#define PUT(a,n,d) \ 493 (a[n] = (d) >> 16), \ 494 (a[(n)+1] = (d) & 65535) 495 496#define GET(a,n) \ 497 (((a)[n] << 16) | (a)[(n)+1]) 498 499/* Keep it positive */ 500#define MAX_PATTERN_SIZE (1 << 30) 501 502#else 503#error LINK_SIZE must be either 2, 3, or 4 504#endif 505 506#elif defined COMPILE_PCRE32 507 508/* Only supported LINK_SIZE is 4 */ 509/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */ 510#undef LINK_SIZE 511#define LINK_SIZE 1 512 513#define PUT(a,n,d) \ 514 (a[n] = (d)) 515 516#define GET(a,n) \ 517 (a[n]) 518 519/* Keep it positive */ 520#define MAX_PATTERN_SIZE (1 << 30) 521 522#else 523#error Unsupported compiling mode 524#endif /* COMPILE_PCRE[8|16|32] */ 525 526/* Convenience macro defined in terms of the others */ 527 528#define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE 529 530 531/* PCRE uses some other 2-byte quantities that do not change when the size of 532offsets changes. There are used for repeat counts and for other things such as 533capturing parenthesis numbers in back references. */ 534 535#if defined COMPILE_PCRE8 536 537#define IMM2_SIZE 2 538 539#define PUT2(a,n,d) \ 540 a[n] = (d) >> 8; \ 541 a[(n)+1] = (d) & 255 542 543/* For reasons that I do not understand, the expression in this GET2 macro is 544treated by gcc as a signed expression, even when a is declared as unsigned. It 545seems that any kind of arithmetic results in a signed value. */ 546 547#define GET2(a,n) \ 548 (unsigned int)(((a)[n] << 8) | (a)[(n)+1]) 549 550#elif defined COMPILE_PCRE16 551 552#define IMM2_SIZE 1 553 554#define PUT2(a,n,d) \ 555 a[n] = d 556 557#define GET2(a,n) \ 558 a[n] 559 560#elif defined COMPILE_PCRE32 561 562#define IMM2_SIZE 1 563 564#define PUT2(a,n,d) \ 565 a[n] = d 566 567#define GET2(a,n) \ 568 a[n] 569 570#else 571#error Unsupported compiling mode 572#endif /* COMPILE_PCRE[8|16|32] */ 573 574#define PUT2INC(a,n,d) PUT2(a,n,d), a += IMM2_SIZE 575 576/* The maximum length of a MARK name is currently one data unit; it may be 577changed in future to be a fixed number of bytes or to depend on LINK_SIZE. */ 578 579#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32 580#define MAX_MARK ((1u << 16) - 1) 581#else 582#define MAX_MARK ((1u << 8) - 1) 583#endif 584 585/* There is a proposed future special "UTF-21" mode, in which only the lowest 58621 bits of a 32-bit character are interpreted as UTF, with the remaining 11 587high-order bits available to the application for other uses. In preparation for 588the future implementation of this mode, there are macros that load a data item 589and, if in this special mode, mask it to 21 bits. These macros all have names 590starting with UCHAR21. In all other modes, including the normal 32-bit 591library, the macros all have the same simple definitions. When the new mode is 592implemented, it is expected that these definitions will be varied appropriately 593using #ifdef when compiling the library that supports the special mode. */ 594 595#define UCHAR21(eptr) (*(eptr)) 596#define UCHAR21TEST(eptr) (*(eptr)) 597#define UCHAR21INC(eptr) (*(eptr)++) 598#define UCHAR21INCTEST(eptr) (*(eptr)++) 599 600/* When UTF encoding is being used, a character is no longer just a single 601byte in 8-bit mode or a single short in 16-bit mode. The macros for character 602handling generate simple sequences when used in the basic mode, and more 603complicated ones for UTF characters. GETCHARLENTEST and other macros are not 604used when UTF is not supported. To make sure they can never even appear when 605UTF support is omitted, we don't even define them. */ 606 607#ifndef SUPPORT_UTF 608 609/* #define MAX_VALUE_FOR_SINGLE_CHAR */ 610/* #define HAS_EXTRALEN(c) */ 611/* #define GET_EXTRALEN(c) */ 612/* #define NOT_FIRSTCHAR(c) */ 613#define GETCHAR(c, eptr) c = *eptr; 614#define GETCHARTEST(c, eptr) c = *eptr; 615#define GETCHARINC(c, eptr) c = *eptr++; 616#define GETCHARINCTEST(c, eptr) c = *eptr++; 617#define GETCHARLEN(c, eptr, len) c = *eptr; 618/* #define GETCHARLENTEST(c, eptr, len) */ 619/* #define BACKCHAR(eptr) */ 620/* #define FORWARDCHAR(eptr) */ 621/* #define ACROSSCHAR(condition, eptr, action) */ 622 623#else /* SUPPORT_UTF */ 624 625/* Tests whether the code point needs extra characters to decode. */ 626 627#define HASUTF8EXTRALEN(c) ((c) >= 0xc0) 628 629/* Base macro to pick up the remaining bytes of a UTF-8 character, not 630advancing the pointer. */ 631 632#define GETUTF8(c, eptr) \ 633 { \ 634 if ((c & 0x20) == 0) \ 635 c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \ 636 else if ((c & 0x10) == 0) \ 637 c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \ 638 else if ((c & 0x08) == 0) \ 639 c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \ 640 ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \ 641 else if ((c & 0x04) == 0) \ 642 c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \ 643 ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \ 644 (eptr[4] & 0x3f); \ 645 else \ 646 c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \ 647 ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \ 648 ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \ 649 } 650 651/* Base macro to pick up the remaining bytes of a UTF-8 character, advancing 652the pointer. */ 653 654#define GETUTF8INC(c, eptr) \ 655 { \ 656 if ((c & 0x20) == 0) \ 657 c = ((c & 0x1f) << 6) | (*eptr++ & 0x3f); \ 658 else if ((c & 0x10) == 0) \ 659 { \ 660 c = ((c & 0x0f) << 12) | ((*eptr & 0x3f) << 6) | (eptr[1] & 0x3f); \ 661 eptr += 2; \ 662 } \ 663 else if ((c & 0x08) == 0) \ 664 { \ 665 c = ((c & 0x07) << 18) | ((*eptr & 0x3f) << 12) | \ 666 ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \ 667 eptr += 3; \ 668 } \ 669 else if ((c & 0x04) == 0) \ 670 { \ 671 c = ((c & 0x03) << 24) | ((*eptr & 0x3f) << 18) | \ 672 ((eptr[1] & 0x3f) << 12) | ((eptr[2] & 0x3f) << 6) | \ 673 (eptr[3] & 0x3f); \ 674 eptr += 4; \ 675 } \ 676 else \ 677 { \ 678 c = ((c & 0x01) << 30) | ((*eptr & 0x3f) << 24) | \ 679 ((eptr[1] & 0x3f) << 18) | ((eptr[2] & 0x3f) << 12) | \ 680 ((eptr[3] & 0x3f) << 6) | (eptr[4] & 0x3f); \ 681 eptr += 5; \ 682 } \ 683 } 684 685#if defined COMPILE_PCRE8 686 687/* These macros were originally written in the form of loops that used data 688from the tables whose names start with PRIV(utf8_table). They were rewritten by 689a user so as not to use loops, because in some environments this gives a 690significant performance advantage, and it seems never to do any harm. */ 691 692/* Tells the biggest code point which can be encoded as a single character. */ 693 694#define MAX_VALUE_FOR_SINGLE_CHAR 127 695 696/* Tests whether the code point needs extra characters to decode. */ 697 698#define HAS_EXTRALEN(c) ((c) >= 0xc0) 699 700/* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE. 701Otherwise it has an undefined behaviour. */ 702 703#define GET_EXTRALEN(c) (PRIV(utf8_table4)[(c) & 0x3f]) 704 705/* Returns TRUE, if the given character is not the first character 706of a UTF sequence. */ 707 708#define NOT_FIRSTCHAR(c) (((c) & 0xc0) == 0x80) 709 710/* Get the next UTF-8 character, not advancing the pointer. This is called when 711we know we are in UTF-8 mode. */ 712 713#define GETCHAR(c, eptr) \ 714 c = *eptr; \ 715 if (c >= 0xc0) GETUTF8(c, eptr); 716 717/* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the 718pointer. */ 719 720#define GETCHARTEST(c, eptr) \ 721 c = *eptr; \ 722 if (utf && c >= 0xc0) GETUTF8(c, eptr); 723 724/* Get the next UTF-8 character, advancing the pointer. This is called when we 725know we are in UTF-8 mode. */ 726 727#define GETCHARINC(c, eptr) \ 728 c = *eptr++; \ 729 if (c >= 0xc0) GETUTF8INC(c, eptr); 730 731/* Get the next character, testing for UTF-8 mode, and advancing the pointer. 732This is called when we don't know if we are in UTF-8 mode. */ 733 734#define GETCHARINCTEST(c, eptr) \ 735 c = *eptr++; \ 736 if (utf && c >= 0xc0) GETUTF8INC(c, eptr); 737 738/* Base macro to pick up the remaining bytes of a UTF-8 character, not 739advancing the pointer, incrementing the length. */ 740 741#define GETUTF8LEN(c, eptr, len) \ 742 { \ 743 if ((c & 0x20) == 0) \ 744 { \ 745 c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \ 746 len++; \ 747 } \ 748 else if ((c & 0x10) == 0) \ 749 { \ 750 c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \ 751 len += 2; \ 752 } \ 753 else if ((c & 0x08) == 0) \ 754 {\ 755 c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \ 756 ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \ 757 len += 3; \ 758 } \ 759 else if ((c & 0x04) == 0) \ 760 { \ 761 c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \ 762 ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \ 763 (eptr[4] & 0x3f); \ 764 len += 4; \ 765 } \ 766 else \ 767 {\ 768 c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \ 769 ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \ 770 ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \ 771 len += 5; \ 772 } \ 773 } 774 775/* Get the next UTF-8 character, not advancing the pointer, incrementing length 776if there are extra bytes. This is called when we know we are in UTF-8 mode. */ 777 778#define GETCHARLEN(c, eptr, len) \ 779 c = *eptr; \ 780 if (c >= 0xc0) GETUTF8LEN(c, eptr, len); 781 782/* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the 783pointer, incrementing length if there are extra bytes. This is called when we 784do not know if we are in UTF-8 mode. */ 785 786#define GETCHARLENTEST(c, eptr, len) \ 787 c = *eptr; \ 788 if (utf && c >= 0xc0) GETUTF8LEN(c, eptr, len); 789 790/* If the pointer is not at the start of a character, move it back until 791it is. This is called only in UTF-8 mode - we don't put a test within the macro 792because almost all calls are already within a block of UTF-8 only code. */ 793 794#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr-- 795 796/* Same as above, just in the other direction. */ 797#define FORWARDCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr++ 798 799/* Same as above, but it allows a fully customizable form. */ 800#define ACROSSCHAR(condition, eptr, action) \ 801 while((condition) && ((eptr) & 0xc0) == 0x80) action 802 803#elif defined COMPILE_PCRE16 804 805/* Tells the biggest code point which can be encoded as a single character. */ 806 807#define MAX_VALUE_FOR_SINGLE_CHAR 65535 808 809/* Tests whether the code point needs extra characters to decode. */ 810 811#define HAS_EXTRALEN(c) (((c) & 0xfc00) == 0xd800) 812 813/* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE. 814Otherwise it has an undefined behaviour. */ 815 816#define GET_EXTRALEN(c) 1 817 818/* Returns TRUE, if the given character is not the first character 819of a UTF sequence. */ 820 821#define NOT_FIRSTCHAR(c) (((c) & 0xfc00) == 0xdc00) 822 823/* Base macro to pick up the low surrogate of a UTF-16 character, not 824advancing the pointer. */ 825 826#define GETUTF16(c, eptr) \ 827 { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; } 828 829/* Get the next UTF-16 character, not advancing the pointer. This is called when 830we know we are in UTF-16 mode. */ 831 832#define GETCHAR(c, eptr) \ 833 c = *eptr; \ 834 if ((c & 0xfc00) == 0xd800) GETUTF16(c, eptr); 835 836/* Get the next UTF-16 character, testing for UTF-16 mode, and not advancing the 837pointer. */ 838 839#define GETCHARTEST(c, eptr) \ 840 c = *eptr; \ 841 if (utf && (c & 0xfc00) == 0xd800) GETUTF16(c, eptr); 842 843/* Base macro to pick up the low surrogate of a UTF-16 character, advancing 844the pointer. */ 845 846#define GETUTF16INC(c, eptr) \ 847 { c = (((c & 0x3ff) << 10) | (*eptr++ & 0x3ff)) + 0x10000; } 848 849/* Get the next UTF-16 character, advancing the pointer. This is called when we 850know we are in UTF-16 mode. */ 851 852#define GETCHARINC(c, eptr) \ 853 c = *eptr++; \ 854 if ((c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr); 855 856/* Get the next character, testing for UTF-16 mode, and advancing the pointer. 857This is called when we don't know if we are in UTF-16 mode. */ 858 859#define GETCHARINCTEST(c, eptr) \ 860 c = *eptr++; \ 861 if (utf && (c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr); 862 863/* Base macro to pick up the low surrogate of a UTF-16 character, not 864advancing the pointer, incrementing the length. */ 865 866#define GETUTF16LEN(c, eptr, len) \ 867 { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; len++; } 868 869/* Get the next UTF-16 character, not advancing the pointer, incrementing 870length if there is a low surrogate. This is called when we know we are in 871UTF-16 mode. */ 872 873#define GETCHARLEN(c, eptr, len) \ 874 c = *eptr; \ 875 if ((c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len); 876 877/* Get the next UTF-816character, testing for UTF-16 mode, not advancing the 878pointer, incrementing length if there is a low surrogate. This is called when 879we do not know if we are in UTF-16 mode. */ 880 881#define GETCHARLENTEST(c, eptr, len) \ 882 c = *eptr; \ 883 if (utf && (c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len); 884 885/* If the pointer is not at the start of a character, move it back until 886it is. This is called only in UTF-16 mode - we don't put a test within the 887macro because almost all calls are already within a block of UTF-16 only 888code. */ 889 890#define BACKCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr-- 891 892/* Same as above, just in the other direction. */ 893#define FORWARDCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr++ 894 895/* Same as above, but it allows a fully customizable form. */ 896#define ACROSSCHAR(condition, eptr, action) \ 897 if ((condition) && ((eptr) & 0xfc00) == 0xdc00) action 898 899#elif defined COMPILE_PCRE32 900 901/* These are trivial for the 32-bit library, since all UTF-32 characters fit 902into one pcre_uchar unit. */ 903#define MAX_VALUE_FOR_SINGLE_CHAR (0x10ffffu) 904#define HAS_EXTRALEN(c) (0) 905#define GET_EXTRALEN(c) (0) 906#define NOT_FIRSTCHAR(c) (0) 907 908/* Get the next UTF-32 character, not advancing the pointer. This is called when 909we know we are in UTF-32 mode. */ 910 911#define GETCHAR(c, eptr) \ 912 c = *(eptr); 913 914/* Get the next UTF-32 character, testing for UTF-32 mode, and not advancing the 915pointer. */ 916 917#define GETCHARTEST(c, eptr) \ 918 c = *(eptr); 919 920/* Get the next UTF-32 character, advancing the pointer. This is called when we 921know we are in UTF-32 mode. */ 922 923#define GETCHARINC(c, eptr) \ 924 c = *((eptr)++); 925 926/* Get the next character, testing for UTF-32 mode, and advancing the pointer. 927This is called when we don't know if we are in UTF-32 mode. */ 928 929#define GETCHARINCTEST(c, eptr) \ 930 c = *((eptr)++); 931 932/* Get the next UTF-32 character, not advancing the pointer, not incrementing 933length (since all UTF-32 is of length 1). This is called when we know we are in 934UTF-32 mode. */ 935 936#define GETCHARLEN(c, eptr, len) \ 937 GETCHAR(c, eptr) 938 939/* Get the next UTF-32character, testing for UTF-32 mode, not advancing the 940pointer, not incrementing the length (since all UTF-32 is of length 1). 941This is called when we do not know if we are in UTF-32 mode. */ 942 943#define GETCHARLENTEST(c, eptr, len) \ 944 GETCHARTEST(c, eptr) 945 946/* If the pointer is not at the start of a character, move it back until 947it is. This is called only in UTF-32 mode - we don't put a test within the 948macro because almost all calls are already within a block of UTF-32 only 949code. 950These are all no-ops since all UTF-32 characters fit into one pcre_uchar. */ 951 952#define BACKCHAR(eptr) do { } while (0) 953 954/* Same as above, just in the other direction. */ 955#define FORWARDCHAR(eptr) do { } while (0) 956 957/* Same as above, but it allows a fully customizable form. */ 958#define ACROSSCHAR(condition, eptr, action) do { } while (0) 959 960#else 961#error Unsupported compiling mode 962#endif /* COMPILE_PCRE[8|16|32] */ 963 964#endif /* SUPPORT_UTF */ 965 966/* Tests for Unicode horizontal and vertical whitespace characters must check a 967number of different values. Using a switch statement for this generates the 968fastest code (no loop, no memory access), and there are several places in the 969interpreter code where this happens. In order to ensure that all the case lists 970remain in step, we use macros so that there is only one place where the lists 971are defined. 972 973These values are also required as lists in pcre_compile.c when processing \h, 974\H, \v and \V in a character class. The lists are defined in pcre_tables.c, but 975macros that define the values are here so that all the definitions are 976together. The lists must be in ascending character order, terminated by 977NOTACHAR (which is 0xffffffff). 978 979Any changes should ensure that the various macros are kept in step with each 980other. NOTE: The values also appear in pcre_jit_compile.c. */ 981 982/* ------ ASCII/Unicode environments ------ */ 983 984#ifndef EBCDIC 985 986#define HSPACE_LIST \ 987 CHAR_HT, CHAR_SPACE, CHAR_NBSP, \ 988 0x1680, 0x180e, 0x2000, 0x2001, 0x2002, 0x2003, 0x2004, 0x2005, \ 989 0x2006, 0x2007, 0x2008, 0x2009, 0x200A, 0x202f, 0x205f, 0x3000, \ 990 NOTACHAR 991 992#define HSPACE_MULTIBYTE_CASES \ 993 case 0x1680: /* OGHAM SPACE MARK */ \ 994 case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ \ 995 case 0x2000: /* EN QUAD */ \ 996 case 0x2001: /* EM QUAD */ \ 997 case 0x2002: /* EN SPACE */ \ 998 case 0x2003: /* EM SPACE */ \ 999 case 0x2004: /* THREE-PER-EM SPACE */ \ 1000 case 0x2005: /* FOUR-PER-EM SPACE */ \ 1001 case 0x2006: /* SIX-PER-EM SPACE */ \ 1002 case 0x2007: /* FIGURE SPACE */ \ 1003 case 0x2008: /* PUNCTUATION SPACE */ \ 1004 case 0x2009: /* THIN SPACE */ \ 1005 case 0x200A: /* HAIR SPACE */ \ 1006 case 0x202f: /* NARROW NO-BREAK SPACE */ \ 1007 case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ \ 1008 case 0x3000 /* IDEOGRAPHIC SPACE */ 1009 1010#define HSPACE_BYTE_CASES \ 1011 case CHAR_HT: \ 1012 case CHAR_SPACE: \ 1013 case CHAR_NBSP 1014 1015#define HSPACE_CASES \ 1016 HSPACE_BYTE_CASES: \ 1017 HSPACE_MULTIBYTE_CASES 1018 1019#define VSPACE_LIST \ 1020 CHAR_LF, CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, 0x2028, 0x2029, NOTACHAR 1021 1022#define VSPACE_MULTIBYTE_CASES \ 1023 case 0x2028: /* LINE SEPARATOR */ \ 1024 case 0x2029 /* PARAGRAPH SEPARATOR */ 1025 1026#define VSPACE_BYTE_CASES \ 1027 case CHAR_LF: \ 1028 case CHAR_VT: \ 1029 case CHAR_FF: \ 1030 case CHAR_CR: \ 1031 case CHAR_NEL 1032 1033#define VSPACE_CASES \ 1034 VSPACE_BYTE_CASES: \ 1035 VSPACE_MULTIBYTE_CASES 1036 1037/* ------ EBCDIC environments ------ */ 1038 1039#else 1040#define HSPACE_LIST CHAR_HT, CHAR_SPACE, CHAR_NBSP, NOTACHAR 1041 1042#define HSPACE_BYTE_CASES \ 1043 case CHAR_HT: \ 1044 case CHAR_SPACE: \ 1045 case CHAR_NBSP 1046 1047#define HSPACE_CASES HSPACE_BYTE_CASES 1048 1049#ifdef EBCDIC_NL25 1050#define VSPACE_LIST \ 1051 CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, CHAR_LF, NOTACHAR 1052#else 1053#define VSPACE_LIST \ 1054 CHAR_VT, CHAR_FF, CHAR_CR, CHAR_LF, CHAR_NEL, NOTACHAR 1055#endif 1056 1057#define VSPACE_BYTE_CASES \ 1058 case CHAR_LF: \ 1059 case CHAR_VT: \ 1060 case CHAR_FF: \ 1061 case CHAR_CR: \ 1062 case CHAR_NEL 1063 1064#define VSPACE_CASES VSPACE_BYTE_CASES 1065#endif /* EBCDIC */ 1066 1067/* ------ End of whitespace macros ------ */ 1068 1069 1070 1071/* Private flags containing information about the compiled regex. They used to 1072live at the top end of the options word, but that got almost full, so they were 1073moved to a 16-bit flags word - which got almost full, so now they are in a 107432-bit flags word. From release 8.00, PCRE_NOPARTIAL is unused, as the 1075restrictions on partial matching have been lifted. It remains for backwards 1076compatibility. */ 1077 1078#define PCRE_MODE8 0x00000001 /* compiled in 8 bit mode */ 1079#define PCRE_MODE16 0x00000002 /* compiled in 16 bit mode */ 1080#define PCRE_MODE32 0x00000004 /* compiled in 32 bit mode */ 1081#define PCRE_FIRSTSET 0x00000010 /* first_char is set */ 1082#define PCRE_FCH_CASELESS 0x00000020 /* caseless first char */ 1083#define PCRE_REQCHSET 0x00000040 /* req_byte is set */ 1084#define PCRE_RCH_CASELESS 0x00000080 /* caseless requested char */ 1085#define PCRE_STARTLINE 0x00000100 /* start after \n for multiline */ 1086#define PCRE_NOPARTIAL 0x00000200 /* can't use partial with this regex */ 1087#define PCRE_JCHANGED 0x00000400 /* j option used in regex */ 1088#define PCRE_HASCRORLF 0x00000800 /* explicit \r or \n in pattern */ 1089#define PCRE_HASTHEN 0x00001000 /* pattern contains (*THEN) */ 1090#define PCRE_MLSET 0x00002000 /* match limit set by regex */ 1091#define PCRE_RLSET 0x00004000 /* recursion limit set by regex */ 1092#define PCRE_MATCH_EMPTY 0x00008000 /* pattern can match empty string */ 1093 1094#if defined COMPILE_PCRE8 1095#define PCRE_MODE PCRE_MODE8 1096#elif defined COMPILE_PCRE16 1097#define PCRE_MODE PCRE_MODE16 1098#elif defined COMPILE_PCRE32 1099#define PCRE_MODE PCRE_MODE32 1100#endif 1101#define PCRE_MODE_MASK (PCRE_MODE8 | PCRE_MODE16 | PCRE_MODE32) 1102 1103/* Flags for the "extra" block produced by pcre_study(). */ 1104 1105#define PCRE_STUDY_MAPPED 0x0001 /* a map of starting chars exists */ 1106#define PCRE_STUDY_MINLEN 0x0002 /* a minimum length field exists */ 1107 1108/* Masks for identifying the public options that are permitted at compile 1109time, run time, or study time, respectively. */ 1110 1111#define PCRE_NEWLINE_BITS (PCRE_NEWLINE_CR|PCRE_NEWLINE_LF|PCRE_NEWLINE_ANY| \ 1112 PCRE_NEWLINE_ANYCRLF) 1113 1114#define PUBLIC_COMPILE_OPTIONS \ 1115 (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \ 1116 PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \ 1117 PCRE_NO_AUTO_CAPTURE|PCRE_NO_AUTO_POSSESS| \ 1118 PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \ 1119 PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \ 1120 PCRE_JAVASCRIPT_COMPAT|PCRE_UCP|PCRE_NO_START_OPTIMIZE|PCRE_NEVER_UTF) 1121 1122#define PUBLIC_EXEC_OPTIONS \ 1123 (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \ 1124 PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_NEWLINE_BITS| \ 1125 PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE|PCRE_NO_START_OPTIMIZE) 1126 1127#define PUBLIC_DFA_EXEC_OPTIONS \ 1128 (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \ 1129 PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_DFA_SHORTEST| \ 1130 PCRE_DFA_RESTART|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \ 1131 PCRE_NO_START_OPTIMIZE) 1132 1133#define PUBLIC_STUDY_OPTIONS \ 1134 (PCRE_STUDY_JIT_COMPILE|PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE| \ 1135 PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE|PCRE_STUDY_EXTRA_NEEDED) 1136 1137#define PUBLIC_JIT_EXEC_OPTIONS \ 1138 (PCRE_NO_UTF8_CHECK|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|\ 1139 PCRE_NOTEMPTY_ATSTART|PCRE_PARTIAL_SOFT|PCRE_PARTIAL_HARD) 1140 1141/* Magic number to provide a small check against being handed junk. */ 1142 1143#define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */ 1144 1145/* This variable is used to detect a loaded regular expression 1146in different endianness. */ 1147 1148#define REVERSED_MAGIC_NUMBER 0x45524350UL /* 'ERCP' */ 1149 1150/* The maximum remaining length of subject we are prepared to search for a 1151req_byte match. */ 1152 1153#define REQ_BYTE_MAX 1000 1154 1155/* Miscellaneous definitions. The #ifndef is to pacify compiler warnings in 1156environments where these macros are defined elsewhere. Unfortunately, there 1157is no way to do the same for the typedef. */ 1158 1159typedef int BOOL; 1160 1161#ifndef FALSE 1162#define FALSE 0 1163#define TRUE 1 1164#endif 1165 1166/* If PCRE is to support UTF-8 on EBCDIC platforms, we cannot use normal 1167character constants like '*' because the compiler would emit their EBCDIC code, 1168which is different from their ASCII/UTF-8 code. Instead we define macros for 1169the characters so that they always use the ASCII/UTF-8 code when UTF-8 support 1170is enabled. When UTF-8 support is not enabled, the definitions use character 1171literals. Both character and string versions of each character are needed, and 1172there are some longer strings as well. 1173 1174This means that, on EBCDIC platforms, the PCRE library can handle either 1175EBCDIC, or UTF-8, but not both. To support both in the same compiled library 1176would need different lookups depending on whether PCRE_UTF8 was set or not. 1177This would make it impossible to use characters in switch/case statements, 1178which would reduce performance. For a theoretical use (which nobody has asked 1179for) in a minority area (EBCDIC platforms), this is not sensible. Any 1180application that did need both could compile two versions of the library, using 1181macros to give the functions distinct names. */ 1182 1183#ifndef SUPPORT_UTF 1184 1185/* UTF-8 support is not enabled; use the platform-dependent character literals 1186so that PCRE works in both ASCII and EBCDIC environments, but only in non-UTF 1187mode. Newline characters are problematic in EBCDIC. Though it has CR and LF 1188characters, a common practice has been to use its NL (0x15) character as the 1189line terminator in C-like processing environments. However, sometimes the LF 1190(0x25) character is used instead, according to this Unicode document: 1191 1192http://unicode.org/standard/reports/tr13/tr13-5.html 1193 1194PCRE defaults EBCDIC NL to 0x15, but has a build-time option to select 0x25 1195instead. Whichever is *not* chosen is defined as NEL. 1196 1197In both ASCII and EBCDIC environments, CHAR_NL and CHAR_LF are synonyms for the 1198same code point. */ 1199 1200#ifdef EBCDIC 1201 1202#ifndef EBCDIC_NL25 1203#define CHAR_NL '\x15' 1204#define CHAR_NEL '\x25' 1205#define STR_NL "\x15" 1206#define STR_NEL "\x25" 1207#else 1208#define CHAR_NL '\x25' 1209#define CHAR_NEL '\x15' 1210#define STR_NL "\x25" 1211#define STR_NEL "\x15" 1212#endif 1213 1214#define CHAR_LF CHAR_NL 1215#define STR_LF STR_NL 1216 1217#define CHAR_ESC '\047' 1218#define CHAR_DEL '\007' 1219#define CHAR_NBSP '\x41' 1220#define STR_ESC "\047" 1221#define STR_DEL "\007" 1222 1223#else /* Not EBCDIC */ 1224 1225/* In ASCII/Unicode, linefeed is '\n' and we equate this to NL for 1226compatibility. NEL is the Unicode newline character; make sure it is 1227a positive value. */ 1228 1229#define CHAR_LF '\n' 1230#define CHAR_NL CHAR_LF 1231#define CHAR_NEL ((unsigned char)'\x85') 1232#define CHAR_ESC '\033' 1233#define CHAR_DEL '\177' 1234#define CHAR_NBSP ((unsigned char)'\xa0') 1235 1236#define STR_LF "\n" 1237#define STR_NL STR_LF 1238#define STR_NEL "\x85" 1239#define STR_ESC "\033" 1240#define STR_DEL "\177" 1241 1242#endif /* EBCDIC */ 1243 1244/* The remaining definitions work in both environments. */ 1245 1246#define CHAR_NULL '\0' 1247#define CHAR_HT '\t' 1248#define CHAR_VT '\v' 1249#define CHAR_FF '\f' 1250#define CHAR_CR '\r' 1251#define CHAR_BS '\b' 1252#define CHAR_BEL '\a' 1253 1254#define CHAR_SPACE ' ' 1255#define CHAR_EXCLAMATION_MARK '!' 1256#define CHAR_QUOTATION_MARK '"' 1257#define CHAR_NUMBER_SIGN '#' 1258#define CHAR_DOLLAR_SIGN '$' 1259#define CHAR_PERCENT_SIGN '%' 1260#define CHAR_AMPERSAND '&' 1261#define CHAR_APOSTROPHE '\'' 1262#define CHAR_LEFT_PARENTHESIS '(' 1263#define CHAR_RIGHT_PARENTHESIS ')' 1264#define CHAR_ASTERISK '*' 1265#define CHAR_PLUS '+' 1266#define CHAR_COMMA ',' 1267#define CHAR_MINUS '-' 1268#define CHAR_DOT '.' 1269#define CHAR_SLASH '/' 1270#define CHAR_0 '0' 1271#define CHAR_1 '1' 1272#define CHAR_2 '2' 1273#define CHAR_3 '3' 1274#define CHAR_4 '4' 1275#define CHAR_5 '5' 1276#define CHAR_6 '6' 1277#define CHAR_7 '7' 1278#define CHAR_8 '8' 1279#define CHAR_9 '9' 1280#define CHAR_COLON ':' 1281#define CHAR_SEMICOLON ';' 1282#define CHAR_LESS_THAN_SIGN '<' 1283#define CHAR_EQUALS_SIGN '=' 1284#define CHAR_GREATER_THAN_SIGN '>' 1285#define CHAR_QUESTION_MARK '?' 1286#define CHAR_COMMERCIAL_AT '@' 1287#define CHAR_A 'A' 1288#define CHAR_B 'B' 1289#define CHAR_C 'C' 1290#define CHAR_D 'D' 1291#define CHAR_E 'E' 1292#define CHAR_F 'F' 1293#define CHAR_G 'G' 1294#define CHAR_H 'H' 1295#define CHAR_I 'I' 1296#define CHAR_J 'J' 1297#define CHAR_K 'K' 1298#define CHAR_L 'L' 1299#define CHAR_M 'M' 1300#define CHAR_N 'N' 1301#define CHAR_O 'O' 1302#define CHAR_P 'P' 1303#define CHAR_Q 'Q' 1304#define CHAR_R 'R' 1305#define CHAR_S 'S' 1306#define CHAR_T 'T' 1307#define CHAR_U 'U' 1308#define CHAR_V 'V' 1309#define CHAR_W 'W' 1310#define CHAR_X 'X' 1311#define CHAR_Y 'Y' 1312#define CHAR_Z 'Z' 1313#define CHAR_LEFT_SQUARE_BRACKET '[' 1314#define CHAR_BACKSLASH '\\' 1315#define CHAR_RIGHT_SQUARE_BRACKET ']' 1316#define CHAR_CIRCUMFLEX_ACCENT '^' 1317#define CHAR_UNDERSCORE '_' 1318#define CHAR_GRAVE_ACCENT '`' 1319#define CHAR_a 'a' 1320#define CHAR_b 'b' 1321#define CHAR_c 'c' 1322#define CHAR_d 'd' 1323#define CHAR_e 'e' 1324#define CHAR_f 'f' 1325#define CHAR_g 'g' 1326#define CHAR_h 'h' 1327#define CHAR_i 'i' 1328#define CHAR_j 'j' 1329#define CHAR_k 'k' 1330#define CHAR_l 'l' 1331#define CHAR_m 'm' 1332#define CHAR_n 'n' 1333#define CHAR_o 'o' 1334#define CHAR_p 'p' 1335#define CHAR_q 'q' 1336#define CHAR_r 'r' 1337#define CHAR_s 's' 1338#define CHAR_t 't' 1339#define CHAR_u 'u' 1340#define CHAR_v 'v' 1341#define CHAR_w 'w' 1342#define CHAR_x 'x' 1343#define CHAR_y 'y' 1344#define CHAR_z 'z' 1345#define CHAR_LEFT_CURLY_BRACKET '{' 1346#define CHAR_VERTICAL_LINE '|' 1347#define CHAR_RIGHT_CURLY_BRACKET '}' 1348#define CHAR_TILDE '~' 1349 1350#define STR_HT "\t" 1351#define STR_VT "\v" 1352#define STR_FF "\f" 1353#define STR_CR "\r" 1354#define STR_BS "\b" 1355#define STR_BEL "\a" 1356 1357#define STR_SPACE " " 1358#define STR_EXCLAMATION_MARK "!" 1359#define STR_QUOTATION_MARK "\"" 1360#define STR_NUMBER_SIGN "#" 1361#define STR_DOLLAR_SIGN "$" 1362#define STR_PERCENT_SIGN "%" 1363#define STR_AMPERSAND "&" 1364#define STR_APOSTROPHE "'" 1365#define STR_LEFT_PARENTHESIS "(" 1366#define STR_RIGHT_PARENTHESIS ")" 1367#define STR_ASTERISK "*" 1368#define STR_PLUS "+" 1369#define STR_COMMA "," 1370#define STR_MINUS "-" 1371#define STR_DOT "." 1372#define STR_SLASH "/" 1373#define STR_0 "0" 1374#define STR_1 "1" 1375#define STR_2 "2" 1376#define STR_3 "3" 1377#define STR_4 "4" 1378#define STR_5 "5" 1379#define STR_6 "6" 1380#define STR_7 "7" 1381#define STR_8 "8" 1382#define STR_9 "9" 1383#define STR_COLON ":" 1384#define STR_SEMICOLON ";" 1385#define STR_LESS_THAN_SIGN "<" 1386#define STR_EQUALS_SIGN "=" 1387#define STR_GREATER_THAN_SIGN ">" 1388#define STR_QUESTION_MARK "?" 1389#define STR_COMMERCIAL_AT "@" 1390#define STR_A "A" 1391#define STR_B "B" 1392#define STR_C "C" 1393#define STR_D "D" 1394#define STR_E "E" 1395#define STR_F "F" 1396#define STR_G "G" 1397#define STR_H "H" 1398#define STR_I "I" 1399#define STR_J "J" 1400#define STR_K "K" 1401#define STR_L "L" 1402#define STR_M "M" 1403#define STR_N "N" 1404#define STR_O "O" 1405#define STR_P "P" 1406#define STR_Q "Q" 1407#define STR_R "R" 1408#define STR_S "S" 1409#define STR_T "T" 1410#define STR_U "U" 1411#define STR_V "V" 1412#define STR_W "W" 1413#define STR_X "X" 1414#define STR_Y "Y" 1415#define STR_Z "Z" 1416#define STR_LEFT_SQUARE_BRACKET "[" 1417#define STR_BACKSLASH "\\" 1418#define STR_RIGHT_SQUARE_BRACKET "]" 1419#define STR_CIRCUMFLEX_ACCENT "^" 1420#define STR_UNDERSCORE "_" 1421#define STR_GRAVE_ACCENT "`" 1422#define STR_a "a" 1423#define STR_b "b" 1424#define STR_c "c" 1425#define STR_d "d" 1426#define STR_e "e" 1427#define STR_f "f" 1428#define STR_g "g" 1429#define STR_h "h" 1430#define STR_i "i" 1431#define STR_j "j" 1432#define STR_k "k" 1433#define STR_l "l" 1434#define STR_m "m" 1435#define STR_n "n" 1436#define STR_o "o" 1437#define STR_p "p" 1438#define STR_q "q" 1439#define STR_r "r" 1440#define STR_s "s" 1441#define STR_t "t" 1442#define STR_u "u" 1443#define STR_v "v" 1444#define STR_w "w" 1445#define STR_x "x" 1446#define STR_y "y" 1447#define STR_z "z" 1448#define STR_LEFT_CURLY_BRACKET "{" 1449#define STR_VERTICAL_LINE "|" 1450#define STR_RIGHT_CURLY_BRACKET "}" 1451#define STR_TILDE "~" 1452 1453#define STRING_ACCEPT0 "ACCEPT\0" 1454#define STRING_COMMIT0 "COMMIT\0" 1455#define STRING_F0 "F\0" 1456#define STRING_FAIL0 "FAIL\0" 1457#define STRING_MARK0 "MARK\0" 1458#define STRING_PRUNE0 "PRUNE\0" 1459#define STRING_SKIP0 "SKIP\0" 1460#define STRING_THEN "THEN" 1461 1462#define STRING_alpha0 "alpha\0" 1463#define STRING_lower0 "lower\0" 1464#define STRING_upper0 "upper\0" 1465#define STRING_alnum0 "alnum\0" 1466#define STRING_ascii0 "ascii\0" 1467#define STRING_blank0 "blank\0" 1468#define STRING_cntrl0 "cntrl\0" 1469#define STRING_digit0 "digit\0" 1470#define STRING_graph0 "graph\0" 1471#define STRING_print0 "print\0" 1472#define STRING_punct0 "punct\0" 1473#define STRING_space0 "space\0" 1474#define STRING_word0 "word\0" 1475#define STRING_xdigit "xdigit" 1476 1477#define STRING_DEFINE "DEFINE" 1478#define STRING_WEIRD_STARTWORD "[:<:]]" 1479#define STRING_WEIRD_ENDWORD "[:>:]]" 1480 1481#define STRING_CR_RIGHTPAR "CR)" 1482#define STRING_LF_RIGHTPAR "LF)" 1483#define STRING_CRLF_RIGHTPAR "CRLF)" 1484#define STRING_ANY_RIGHTPAR "ANY)" 1485#define STRING_ANYCRLF_RIGHTPAR "ANYCRLF)" 1486#define STRING_BSR_ANYCRLF_RIGHTPAR "BSR_ANYCRLF)" 1487#define STRING_BSR_UNICODE_RIGHTPAR "BSR_UNICODE)" 1488#define STRING_UTF8_RIGHTPAR "UTF8)" 1489#define STRING_UTF16_RIGHTPAR "UTF16)" 1490#define STRING_UTF32_RIGHTPAR "UTF32)" 1491#define STRING_UTF_RIGHTPAR "UTF)" 1492#define STRING_UCP_RIGHTPAR "UCP)" 1493#define STRING_NO_AUTO_POSSESS_RIGHTPAR "NO_AUTO_POSSESS)" 1494#define STRING_NO_START_OPT_RIGHTPAR "NO_START_OPT)" 1495#define STRING_LIMIT_MATCH_EQ "LIMIT_MATCH=" 1496#define STRING_LIMIT_RECURSION_EQ "LIMIT_RECURSION=" 1497 1498#else /* SUPPORT_UTF */ 1499 1500/* UTF-8 support is enabled; always use UTF-8 (=ASCII) character codes. This 1501works in both modes non-EBCDIC platforms, and on EBCDIC platforms in UTF-8 mode 1502only. */ 1503 1504#define CHAR_HT '\011' 1505#define CHAR_VT '\013' 1506#define CHAR_FF '\014' 1507#define CHAR_CR '\015' 1508#define CHAR_LF '\012' 1509#define CHAR_NL CHAR_LF 1510#define CHAR_NEL ((unsigned char)'\x85') 1511#define CHAR_BS '\010' 1512#define CHAR_BEL '\007' 1513#define CHAR_ESC '\033' 1514#define CHAR_DEL '\177' 1515 1516#define CHAR_NULL '\0' 1517#define CHAR_SPACE '\040' 1518#define CHAR_EXCLAMATION_MARK '\041' 1519#define CHAR_QUOTATION_MARK '\042' 1520#define CHAR_NUMBER_SIGN '\043' 1521#define CHAR_DOLLAR_SIGN '\044' 1522#define CHAR_PERCENT_SIGN '\045' 1523#define CHAR_AMPERSAND '\046' 1524#define CHAR_APOSTROPHE '\047' 1525#define CHAR_LEFT_PARENTHESIS '\050' 1526#define CHAR_RIGHT_PARENTHESIS '\051' 1527#define CHAR_ASTERISK '\052' 1528#define CHAR_PLUS '\053' 1529#define CHAR_COMMA '\054' 1530#define CHAR_MINUS '\055' 1531#define CHAR_DOT '\056' 1532#define CHAR_SLASH '\057' 1533#define CHAR_0 '\060' 1534#define CHAR_1 '\061' 1535#define CHAR_2 '\062' 1536#define CHAR_3 '\063' 1537#define CHAR_4 '\064' 1538#define CHAR_5 '\065' 1539#define CHAR_6 '\066' 1540#define CHAR_7 '\067' 1541#define CHAR_8 '\070' 1542#define CHAR_9 '\071' 1543#define CHAR_COLON '\072' 1544#define CHAR_SEMICOLON '\073' 1545#define CHAR_LESS_THAN_SIGN '\074' 1546#define CHAR_EQUALS_SIGN '\075' 1547#define CHAR_GREATER_THAN_SIGN '\076' 1548#define CHAR_QUESTION_MARK '\077' 1549#define CHAR_COMMERCIAL_AT '\100' 1550#define CHAR_A '\101' 1551#define CHAR_B '\102' 1552#define CHAR_C '\103' 1553#define CHAR_D '\104' 1554#define CHAR_E '\105' 1555#define CHAR_F '\106' 1556#define CHAR_G '\107' 1557#define CHAR_H '\110' 1558#define CHAR_I '\111' 1559#define CHAR_J '\112' 1560#define CHAR_K '\113' 1561#define CHAR_L '\114' 1562#define CHAR_M '\115' 1563#define CHAR_N '\116' 1564#define CHAR_O '\117' 1565#define CHAR_P '\120' 1566#define CHAR_Q '\121' 1567#define CHAR_R '\122' 1568#define CHAR_S '\123' 1569#define CHAR_T '\124' 1570#define CHAR_U '\125' 1571#define CHAR_V '\126' 1572#define CHAR_W '\127' 1573#define CHAR_X '\130' 1574#define CHAR_Y '\131' 1575#define CHAR_Z '\132' 1576#define CHAR_LEFT_SQUARE_BRACKET '\133' 1577#define CHAR_BACKSLASH '\134' 1578#define CHAR_RIGHT_SQUARE_BRACKET '\135' 1579#define CHAR_CIRCUMFLEX_ACCENT '\136' 1580#define CHAR_UNDERSCORE '\137' 1581#define CHAR_GRAVE_ACCENT '\140' 1582#define CHAR_a '\141' 1583#define CHAR_b '\142' 1584#define CHAR_c '\143' 1585#define CHAR_d '\144' 1586#define CHAR_e '\145' 1587#define CHAR_f '\146' 1588#define CHAR_g '\147' 1589#define CHAR_h '\150' 1590#define CHAR_i '\151' 1591#define CHAR_j '\152' 1592#define CHAR_k '\153' 1593#define CHAR_l '\154' 1594#define CHAR_m '\155' 1595#define CHAR_n '\156' 1596#define CHAR_o '\157' 1597#define CHAR_p '\160' 1598#define CHAR_q '\161' 1599#define CHAR_r '\162' 1600#define CHAR_s '\163' 1601#define CHAR_t '\164' 1602#define CHAR_u '\165' 1603#define CHAR_v '\166' 1604#define CHAR_w '\167' 1605#define CHAR_x '\170' 1606#define CHAR_y '\171' 1607#define CHAR_z '\172' 1608#define CHAR_LEFT_CURLY_BRACKET '\173' 1609#define CHAR_VERTICAL_LINE '\174' 1610#define CHAR_RIGHT_CURLY_BRACKET '\175' 1611#define CHAR_TILDE '\176' 1612#define CHAR_NBSP ((unsigned char)'\xa0') 1613 1614#define STR_HT "\011" 1615#define STR_VT "\013" 1616#define STR_FF "\014" 1617#define STR_CR "\015" 1618#define STR_NL "\012" 1619#define STR_BS "\010" 1620#define STR_BEL "\007" 1621#define STR_ESC "\033" 1622#define STR_DEL "\177" 1623 1624#define STR_SPACE "\040" 1625#define STR_EXCLAMATION_MARK "\041" 1626#define STR_QUOTATION_MARK "\042" 1627#define STR_NUMBER_SIGN "\043" 1628#define STR_DOLLAR_SIGN "\044" 1629#define STR_PERCENT_SIGN "\045" 1630#define STR_AMPERSAND "\046" 1631#define STR_APOSTROPHE "\047" 1632#define STR_LEFT_PARENTHESIS "\050" 1633#define STR_RIGHT_PARENTHESIS "\051" 1634#define STR_ASTERISK "\052" 1635#define STR_PLUS "\053" 1636#define STR_COMMA "\054" 1637#define STR_MINUS "\055" 1638#define STR_DOT "\056" 1639#define STR_SLASH "\057" 1640#define STR_0 "\060" 1641#define STR_1 "\061" 1642#define STR_2 "\062" 1643#define STR_3 "\063" 1644#define STR_4 "\064" 1645#define STR_5 "\065" 1646#define STR_6 "\066" 1647#define STR_7 "\067" 1648#define STR_8 "\070" 1649#define STR_9 "\071" 1650#define STR_COLON "\072" 1651#define STR_SEMICOLON "\073" 1652#define STR_LESS_THAN_SIGN "\074" 1653#define STR_EQUALS_SIGN "\075" 1654#define STR_GREATER_THAN_SIGN "\076" 1655#define STR_QUESTION_MARK "\077" 1656#define STR_COMMERCIAL_AT "\100" 1657#define STR_A "\101" 1658#define STR_B "\102" 1659#define STR_C "\103" 1660#define STR_D "\104" 1661#define STR_E "\105" 1662#define STR_F "\106" 1663#define STR_G "\107" 1664#define STR_H "\110" 1665#define STR_I "\111" 1666#define STR_J "\112" 1667#define STR_K "\113" 1668#define STR_L "\114" 1669#define STR_M "\115" 1670#define STR_N "\116" 1671#define STR_O "\117" 1672#define STR_P "\120" 1673#define STR_Q "\121" 1674#define STR_R "\122" 1675#define STR_S "\123" 1676#define STR_T "\124" 1677#define STR_U "\125" 1678#define STR_V "\126" 1679#define STR_W "\127" 1680#define STR_X "\130" 1681#define STR_Y "\131" 1682#define STR_Z "\132" 1683#define STR_LEFT_SQUARE_BRACKET "\133" 1684#define STR_BACKSLASH "\134" 1685#define STR_RIGHT_SQUARE_BRACKET "\135" 1686#define STR_CIRCUMFLEX_ACCENT "\136" 1687#define STR_UNDERSCORE "\137" 1688#define STR_GRAVE_ACCENT "\140" 1689#define STR_a "\141" 1690#define STR_b "\142" 1691#define STR_c "\143" 1692#define STR_d "\144" 1693#define STR_e "\145" 1694#define STR_f "\146" 1695#define STR_g "\147" 1696#define STR_h "\150" 1697#define STR_i "\151" 1698#define STR_j "\152" 1699#define STR_k "\153" 1700#define STR_l "\154" 1701#define STR_m "\155" 1702#define STR_n "\156" 1703#define STR_o "\157" 1704#define STR_p "\160" 1705#define STR_q "\161" 1706#define STR_r "\162" 1707#define STR_s "\163" 1708#define STR_t "\164" 1709#define STR_u "\165" 1710#define STR_v "\166" 1711#define STR_w "\167" 1712#define STR_x "\170" 1713#define STR_y "\171" 1714#define STR_z "\172" 1715#define STR_LEFT_CURLY_BRACKET "\173" 1716#define STR_VERTICAL_LINE "\174" 1717#define STR_RIGHT_CURLY_BRACKET "\175" 1718#define STR_TILDE "\176" 1719 1720#define STRING_ACCEPT0 STR_A STR_C STR_C STR_E STR_P STR_T "\0" 1721#define STRING_COMMIT0 STR_C STR_O STR_M STR_M STR_I STR_T "\0" 1722#define STRING_F0 STR_F "\0" 1723#define STRING_FAIL0 STR_F STR_A STR_I STR_L "\0" 1724#define STRING_MARK0 STR_M STR_A STR_R STR_K "\0" 1725#define STRING_PRUNE0 STR_P STR_R STR_U STR_N STR_E "\0" 1726#define STRING_SKIP0 STR_S STR_K STR_I STR_P "\0" 1727#define STRING_THEN STR_T STR_H STR_E STR_N 1728 1729#define STRING_alpha0 STR_a STR_l STR_p STR_h STR_a "\0" 1730#define STRING_lower0 STR_l STR_o STR_w STR_e STR_r "\0" 1731#define STRING_upper0 STR_u STR_p STR_p STR_e STR_r "\0" 1732#define STRING_alnum0 STR_a STR_l STR_n STR_u STR_m "\0" 1733#define STRING_ascii0 STR_a STR_s STR_c STR_i STR_i "\0" 1734#define STRING_blank0 STR_b STR_l STR_a STR_n STR_k "\0" 1735#define STRING_cntrl0 STR_c STR_n STR_t STR_r STR_l "\0" 1736#define STRING_digit0 STR_d STR_i STR_g STR_i STR_t "\0" 1737#define STRING_graph0 STR_g STR_r STR_a STR_p STR_h "\0" 1738#define STRING_print0 STR_p STR_r STR_i STR_n STR_t "\0" 1739#define STRING_punct0 STR_p STR_u STR_n STR_c STR_t "\0" 1740#define STRING_space0 STR_s STR_p STR_a STR_c STR_e "\0" 1741#define STRING_word0 STR_w STR_o STR_r STR_d "\0" 1742#define STRING_xdigit STR_x STR_d STR_i STR_g STR_i STR_t 1743 1744#define STRING_DEFINE STR_D STR_E STR_F STR_I STR_N STR_E 1745#define STRING_WEIRD_STARTWORD STR_LEFT_SQUARE_BRACKET STR_COLON STR_LESS_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET 1746#define STRING_WEIRD_ENDWORD STR_LEFT_SQUARE_BRACKET STR_COLON STR_GREATER_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET 1747 1748#define STRING_CR_RIGHTPAR STR_C STR_R STR_RIGHT_PARENTHESIS 1749#define STRING_LF_RIGHTPAR STR_L STR_F STR_RIGHT_PARENTHESIS 1750#define STRING_CRLF_RIGHTPAR STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS 1751#define STRING_ANY_RIGHTPAR STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS 1752#define STRING_ANYCRLF_RIGHTPAR STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS 1753#define STRING_BSR_ANYCRLF_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS 1754#define STRING_BSR_UNICODE_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS 1755#define STRING_UTF8_RIGHTPAR STR_U STR_T STR_F STR_8 STR_RIGHT_PARENTHESIS 1756#define STRING_UTF16_RIGHTPAR STR_U STR_T STR_F STR_1 STR_6 STR_RIGHT_PARENTHESIS 1757#define STRING_UTF32_RIGHTPAR STR_U STR_T STR_F STR_3 STR_2 STR_RIGHT_PARENTHESIS 1758#define STRING_UTF_RIGHTPAR STR_U STR_T STR_F STR_RIGHT_PARENTHESIS 1759#define STRING_UCP_RIGHTPAR STR_U STR_C STR_P STR_RIGHT_PARENTHESIS 1760#define STRING_NO_AUTO_POSSESS_RIGHTPAR STR_N STR_O STR_UNDERSCORE STR_A STR_U STR_T STR_O STR_UNDERSCORE STR_P STR_O STR_S STR_S STR_E STR_S STR_S STR_RIGHT_PARENTHESIS 1761#define STRING_NO_START_OPT_RIGHTPAR STR_N STR_O STR_UNDERSCORE STR_S STR_T STR_A STR_R STR_T STR_UNDERSCORE STR_O STR_P STR_T STR_RIGHT_PARENTHESIS 1762#define STRING_LIMIT_MATCH_EQ STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_M STR_A STR_T STR_C STR_H STR_EQUALS_SIGN 1763#define STRING_LIMIT_RECURSION_EQ STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_R STR_E STR_C STR_U STR_R STR_S STR_I STR_O STR_N STR_EQUALS_SIGN 1764 1765#endif /* SUPPORT_UTF */ 1766 1767/* Escape items that are just an encoding of a particular data value. */ 1768 1769#ifndef ESC_a 1770#define ESC_a CHAR_BEL 1771#endif 1772 1773#ifndef ESC_e 1774#define ESC_e CHAR_ESC 1775#endif 1776 1777#ifndef ESC_f 1778#define ESC_f CHAR_FF 1779#endif 1780 1781#ifndef ESC_n 1782#define ESC_n CHAR_LF 1783#endif 1784 1785#ifndef ESC_r 1786#define ESC_r CHAR_CR 1787#endif 1788 1789/* We can't officially use ESC_t because it is a POSIX reserved identifier 1790(presumably because of all the others like size_t). */ 1791 1792#ifndef ESC_tee 1793#define ESC_tee CHAR_HT 1794#endif 1795 1796/* Codes for different types of Unicode property */ 1797 1798#define PT_ANY 0 /* Any property - matches all chars */ 1799#define PT_LAMP 1 /* L& - the union of Lu, Ll, Lt */ 1800#define PT_GC 2 /* Specified general characteristic (e.g. L) */ 1801#define PT_PC 3 /* Specified particular characteristic (e.g. Lu) */ 1802#define PT_SC 4 /* Script (e.g. Han) */ 1803#define PT_ALNUM 5 /* Alphanumeric - the union of L and N */ 1804#define PT_SPACE 6 /* Perl space - Z plus 9,10,12,13 */ 1805#define PT_PXSPACE 7 /* POSIX space - Z plus 9,10,11,12,13 */ 1806#define PT_WORD 8 /* Word - L plus N plus underscore */ 1807#define PT_CLIST 9 /* Pseudo-property: match character list */ 1808#define PT_UCNC 10 /* Universal Character nameable character */ 1809#define PT_TABSIZE 11 /* Size of square table for autopossessify tests */ 1810 1811/* The following special properties are used only in XCLASS items, when POSIX 1812classes are specified and PCRE_UCP is set - in other words, for Unicode 1813handling of these classes. They are not available via the \p or \P escapes like 1814those in the above list, and so they do not take part in the autopossessifying 1815table. */ 1816 1817#define PT_PXGRAPH 11 /* [:graph:] - characters that mark the paper */ 1818#define PT_PXPRINT 12 /* [:print:] - [:graph:] plus non-control spaces */ 1819#define PT_PXPUNCT 13 /* [:punct:] - punctuation characters */ 1820 1821/* Flag bits and data types for the extended class (OP_XCLASS) for classes that 1822contain characters with values greater than 255. */ 1823 1824#define XCL_NOT 0x01 /* Flag: this is a negative class */ 1825#define XCL_MAP 0x02 /* Flag: a 32-byte map is present */ 1826#define XCL_HASPROP 0x04 /* Flag: property checks are present. */ 1827 1828#define XCL_END 0 /* Marks end of individual items */ 1829#define XCL_SINGLE 1 /* Single item (one multibyte char) follows */ 1830#define XCL_RANGE 2 /* A range (two multibyte chars) follows */ 1831#define XCL_PROP 3 /* Unicode property (2-byte property code follows) */ 1832#define XCL_NOTPROP 4 /* Unicode inverted property (ditto) */ 1833 1834/* These are escaped items that aren't just an encoding of a particular data 1835value such as \n. They must have non-zero values, as check_escape() returns 0 1836for a data character. Also, they must appear in the same order as in the 1837opcode definitions below, up to ESC_z. There's a dummy for OP_ALLANY because it 1838corresponds to "." in DOTALL mode rather than an escape sequence. It is also 1839used for [^] in JavaScript compatibility mode, and for \C in non-utf mode. In 1840non-DOTALL mode, "." behaves like \N. 1841 1842The special values ESC_DU, ESC_du, etc. are used instead of ESC_D, ESC_d, etc. 1843when PCRE_UCP is set and replacement of \d etc by \p sequences is required. 1844They must be contiguous, and remain in order so that the replacements can be 1845looked up from a table. 1846 1847Negative numbers are used to encode a backreference (\1, \2, \3, etc.) in 1848check_escape(). There are two tests in the code for an escape 1849greater than ESC_b and less than ESC_Z to detect the types that may be 1850repeated. These are the types that consume characters. If any new escapes are 1851put in between that don't consume a character, that code will have to change. 1852*/ 1853 1854enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, 1855 ESC_W, ESC_w, ESC_N, ESC_dum, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H, 1856 ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z, 1857 ESC_E, ESC_Q, ESC_g, ESC_k, 1858 ESC_DU, ESC_du, ESC_SU, ESC_su, ESC_WU, ESC_wu }; 1859 1860 1861/********************** Opcode definitions ******************/ 1862 1863/****** NOTE NOTE NOTE ****** 1864 1865Starting from 1 (i.e. after OP_END), the values up to OP_EOD must correspond in 1866order to the list of escapes immediately above. Furthermore, values up to 1867OP_DOLLM must not be changed without adjusting the table called autoposstab in 1868pcre_compile.c 1869 1870Whenever this list is updated, the two macro definitions that follow must be 1871updated to match. The possessification table called "opcode_possessify" in 1872pcre_compile.c must also be updated, and also the tables called "coptable" 1873and "poptable" in pcre_dfa_exec.c. 1874 1875****** NOTE NOTE NOTE ******/ 1876 1877 1878/* The values between FIRST_AUTOTAB_OP and LAST_AUTOTAB_RIGHT_OP, inclusive, 1879are used in a table for deciding whether a repeated character type can be 1880auto-possessified. */ 1881 1882#define FIRST_AUTOTAB_OP OP_NOT_DIGIT 1883#define LAST_AUTOTAB_LEFT_OP OP_EXTUNI 1884#define LAST_AUTOTAB_RIGHT_OP OP_DOLLM 1885 1886enum { 1887 OP_END, /* 0 End of pattern */ 1888 1889 /* Values corresponding to backslashed metacharacters */ 1890 1891 OP_SOD, /* 1 Start of data: \A */ 1892 OP_SOM, /* 2 Start of match (subject + offset): \G */ 1893 OP_SET_SOM, /* 3 Set start of match (\K) */ 1894 OP_NOT_WORD_BOUNDARY, /* 4 \B */ 1895 OP_WORD_BOUNDARY, /* 5 \b */ 1896 OP_NOT_DIGIT, /* 6 \D */ 1897 OP_DIGIT, /* 7 \d */ 1898 OP_NOT_WHITESPACE, /* 8 \S */ 1899 OP_WHITESPACE, /* 9 \s */ 1900 OP_NOT_WORDCHAR, /* 10 \W */ 1901 OP_WORDCHAR, /* 11 \w */ 1902 1903 OP_ANY, /* 12 Match any character except newline (\N) */ 1904 OP_ALLANY, /* 13 Match any character */ 1905 OP_ANYBYTE, /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */ 1906 OP_NOTPROP, /* 15 \P (not Unicode property) */ 1907 OP_PROP, /* 16 \p (Unicode property) */ 1908 OP_ANYNL, /* 17 \R (any newline sequence) */ 1909 OP_NOT_HSPACE, /* 18 \H (not horizontal whitespace) */ 1910 OP_HSPACE, /* 19 \h (horizontal whitespace) */ 1911 OP_NOT_VSPACE, /* 20 \V (not vertical whitespace) */ 1912 OP_VSPACE, /* 21 \v (vertical whitespace) */ 1913 OP_EXTUNI, /* 22 \X (extended Unicode sequence */ 1914 OP_EODN, /* 23 End of data or \n at end of data (\Z) */ 1915 OP_EOD, /* 24 End of data (\z) */ 1916 1917 /* Line end assertions */ 1918 1919 OP_DOLL, /* 25 End of line - not multiline */ 1920 OP_DOLLM, /* 26 End of line - multiline */ 1921 OP_CIRC, /* 27 Start of line - not multiline */ 1922 OP_CIRCM, /* 28 Start of line - multiline */ 1923 1924 /* Single characters; caseful must precede the caseless ones */ 1925 1926 OP_CHAR, /* 29 Match one character, casefully */ 1927 OP_CHARI, /* 30 Match one character, caselessly */ 1928 OP_NOT, /* 31 Match one character, not the given one, casefully */ 1929 OP_NOTI, /* 32 Match one character, not the given one, caselessly */ 1930 1931 /* The following sets of 13 opcodes must always be kept in step because 1932 the offset from the first one is used to generate the others. */ 1933 1934 /* Repeated characters; caseful must precede the caseless ones */ 1935 1936 OP_STAR, /* 33 The maximizing and minimizing versions of */ 1937 OP_MINSTAR, /* 34 these six opcodes must come in pairs, with */ 1938 OP_PLUS, /* 35 the minimizing one second. */ 1939 OP_MINPLUS, /* 36 */ 1940 OP_QUERY, /* 37 */ 1941 OP_MINQUERY, /* 38 */ 1942 1943 OP_UPTO, /* 39 From 0 to n matches of one character, caseful*/ 1944 OP_MINUPTO, /* 40 */ 1945 OP_EXACT, /* 41 Exactly n matches */ 1946 1947 OP_POSSTAR, /* 42 Possessified star, caseful */ 1948 OP_POSPLUS, /* 43 Possessified plus, caseful */ 1949 OP_POSQUERY, /* 44 Posesssified query, caseful */ 1950 OP_POSUPTO, /* 45 Possessified upto, caseful */ 1951 1952 /* Repeated characters; caseless must follow the caseful ones */ 1953 1954 OP_STARI, /* 46 */ 1955 OP_MINSTARI, /* 47 */ 1956 OP_PLUSI, /* 48 */ 1957 OP_MINPLUSI, /* 49 */ 1958 OP_QUERYI, /* 50 */ 1959 OP_MINQUERYI, /* 51 */ 1960 1961 OP_UPTOI, /* 52 From 0 to n matches of one character, caseless */ 1962 OP_MINUPTOI, /* 53 */ 1963 OP_EXACTI, /* 54 */ 1964 1965 OP_POSSTARI, /* 55 Possessified star, caseless */ 1966 OP_POSPLUSI, /* 56 Possessified plus, caseless */ 1967 OP_POSQUERYI, /* 57 Posesssified query, caseless */ 1968 OP_POSUPTOI, /* 58 Possessified upto, caseless */ 1969 1970 /* The negated ones must follow the non-negated ones, and match them */ 1971 /* Negated repeated character, caseful; must precede the caseless ones */ 1972 1973 OP_NOTSTAR, /* 59 The maximizing and minimizing versions of */ 1974 OP_NOTMINSTAR, /* 60 these six opcodes must come in pairs, with */ 1975 OP_NOTPLUS, /* 61 the minimizing one second. They must be in */ 1976 OP_NOTMINPLUS, /* 62 exactly the same order as those above. */ 1977 OP_NOTQUERY, /* 63 */ 1978 OP_NOTMINQUERY, /* 64 */ 1979 1980 OP_NOTUPTO, /* 65 From 0 to n matches, caseful */ 1981 OP_NOTMINUPTO, /* 66 */ 1982 OP_NOTEXACT, /* 67 Exactly n matches */ 1983 1984 OP_NOTPOSSTAR, /* 68 Possessified versions, caseful */ 1985 OP_NOTPOSPLUS, /* 69 */ 1986 OP_NOTPOSQUERY, /* 70 */ 1987 OP_NOTPOSUPTO, /* 71 */ 1988 1989 /* Negated repeated character, caseless; must follow the caseful ones */ 1990 1991 OP_NOTSTARI, /* 72 */ 1992 OP_NOTMINSTARI, /* 73 */ 1993 OP_NOTPLUSI, /* 74 */ 1994 OP_NOTMINPLUSI, /* 75 */ 1995 OP_NOTQUERYI, /* 76 */ 1996 OP_NOTMINQUERYI, /* 77 */ 1997 1998 OP_NOTUPTOI, /* 78 From 0 to n matches, caseless */ 1999 OP_NOTMINUPTOI, /* 79 */ 2000 OP_NOTEXACTI, /* 80 Exactly n matches */ 2001 2002 OP_NOTPOSSTARI, /* 81 Possessified versions, caseless */ 2003 OP_NOTPOSPLUSI, /* 82 */ 2004 OP_NOTPOSQUERYI, /* 83 */ 2005 OP_NOTPOSUPTOI, /* 84 */ 2006 2007 /* Character types */ 2008 2009 OP_TYPESTAR, /* 85 The maximizing and minimizing versions of */ 2010 OP_TYPEMINSTAR, /* 86 these six opcodes must come in pairs, with */ 2011 OP_TYPEPLUS, /* 87 the minimizing one second. These codes must */ 2012 OP_TYPEMINPLUS, /* 88 be in exactly the same order as those above. */ 2013 OP_TYPEQUERY, /* 89 */ 2014 OP_TYPEMINQUERY, /* 90 */ 2015 2016 OP_TYPEUPTO, /* 91 From 0 to n matches */ 2017 OP_TYPEMINUPTO, /* 92 */ 2018 OP_TYPEEXACT, /* 93 Exactly n matches */ 2019 2020 OP_TYPEPOSSTAR, /* 94 Possessified versions */ 2021 OP_TYPEPOSPLUS, /* 95 */ 2022 OP_TYPEPOSQUERY, /* 96 */ 2023 OP_TYPEPOSUPTO, /* 97 */ 2024 2025 /* These are used for character classes and back references; only the 2026 first six are the same as the sets above. */ 2027 2028 OP_CRSTAR, /* 98 The maximizing and minimizing versions of */ 2029 OP_CRMINSTAR, /* 99 all these opcodes must come in pairs, with */ 2030 OP_CRPLUS, /* 100 the minimizing one second. These codes must */ 2031 OP_CRMINPLUS, /* 101 be in exactly the same order as those above. */ 2032 OP_CRQUERY, /* 102 */ 2033 OP_CRMINQUERY, /* 103 */ 2034 2035 OP_CRRANGE, /* 104 These are different to the three sets above. */ 2036 OP_CRMINRANGE, /* 105 */ 2037 2038 OP_CRPOSSTAR, /* 106 Possessified versions */ 2039 OP_CRPOSPLUS, /* 107 */ 2040 OP_CRPOSQUERY, /* 108 */ 2041 OP_CRPOSRANGE, /* 109 */ 2042 2043 /* End of quantifier opcodes */ 2044 2045 OP_CLASS, /* 110 Match a character class, chars < 256 only */ 2046 OP_NCLASS, /* 111 Same, but the bitmap was created from a negative 2047 class - the difference is relevant only when a 2048 character > 255 is encountered. */ 2049 OP_XCLASS, /* 112 Extended class for handling > 255 chars within the 2050 class. This does both positive and negative. */ 2051 OP_REF, /* 113 Match a back reference, casefully */ 2052 OP_REFI, /* 114 Match a back reference, caselessly */ 2053 OP_DNREF, /* 115 Match a duplicate name backref, casefully */ 2054 OP_DNREFI, /* 116 Match a duplicate name backref, caselessly */ 2055 OP_RECURSE, /* 117 Match a numbered subpattern (possibly recursive) */ 2056 OP_CALLOUT, /* 118 Call out to external function if provided */ 2057 2058 OP_ALT, /* 119 Start of alternation */ 2059 OP_KET, /* 120 End of group that doesn't have an unbounded repeat */ 2060 OP_KETRMAX, /* 121 These two must remain together and in this */ 2061 OP_KETRMIN, /* 122 order. They are for groups the repeat for ever. */ 2062 OP_KETRPOS, /* 123 Possessive unlimited repeat. */ 2063 2064 /* The assertions must come before BRA, CBRA, ONCE, and COND, and the four 2065 asserts must remain in order. */ 2066 2067 OP_REVERSE, /* 124 Move pointer back - used in lookbehind assertions */ 2068 OP_ASSERT, /* 125 Positive lookahead */ 2069 OP_ASSERT_NOT, /* 126 Negative lookahead */ 2070 OP_ASSERTBACK, /* 127 Positive lookbehind */ 2071 OP_ASSERTBACK_NOT, /* 128 Negative lookbehind */ 2072 2073 /* ONCE, ONCE_NC, BRA, BRAPOS, CBRA, CBRAPOS, and COND must come immediately 2074 after the assertions, with ONCE first, as there's a test for >= ONCE for a 2075 subpattern that isn't an assertion. The POS versions must immediately follow 2076 the non-POS versions in each case. */ 2077 2078 OP_ONCE, /* 129 Atomic group, contains captures */ 2079 OP_ONCE_NC, /* 130 Atomic group containing no captures */ 2080 OP_BRA, /* 131 Start of non-capturing bracket */ 2081 OP_BRAPOS, /* 132 Ditto, with unlimited, possessive repeat */ 2082 OP_CBRA, /* 133 Start of capturing bracket */ 2083 OP_CBRAPOS, /* 134 Ditto, with unlimited, possessive repeat */ 2084 OP_COND, /* 135 Conditional group */ 2085 2086 /* These five must follow the previous five, in the same order. There's a 2087 check for >= SBRA to distinguish the two sets. */ 2088 2089 OP_SBRA, /* 136 Start of non-capturing bracket, check empty */ 2090 OP_SBRAPOS, /* 137 Ditto, with unlimited, possessive repeat */ 2091 OP_SCBRA, /* 138 Start of capturing bracket, check empty */ 2092 OP_SCBRAPOS, /* 139 Ditto, with unlimited, possessive repeat */ 2093 OP_SCOND, /* 140 Conditional group, check empty */ 2094 2095 /* The next two pairs must (respectively) be kept together. */ 2096 2097 OP_CREF, /* 141 Used to hold a capture number as condition */ 2098 OP_DNCREF, /* 142 Used to point to duplicate names as a condition */ 2099 OP_RREF, /* 143 Used to hold a recursion number as condition */ 2100 OP_DNRREF, /* 144 Used to point to duplicate names as a condition */ 2101 OP_DEF, /* 145 The DEFINE condition */ 2102 2103 OP_BRAZERO, /* 146 These two must remain together and in this */ 2104 OP_BRAMINZERO, /* 147 order. */ 2105 OP_BRAPOSZERO, /* 148 */ 2106 2107 /* These are backtracking control verbs */ 2108 2109 OP_MARK, /* 149 always has an argument */ 2110 OP_PRUNE, /* 150 */ 2111 OP_PRUNE_ARG, /* 151 same, but with argument */ 2112 OP_SKIP, /* 152 */ 2113 OP_SKIP_ARG, /* 153 same, but with argument */ 2114 OP_THEN, /* 154 */ 2115 OP_THEN_ARG, /* 155 same, but with argument */ 2116 OP_COMMIT, /* 156 */ 2117 2118 /* These are forced failure and success verbs */ 2119 2120 OP_FAIL, /* 157 */ 2121 OP_ACCEPT, /* 158 */ 2122 OP_ASSERT_ACCEPT, /* 159 Used inside assertions */ 2123 OP_CLOSE, /* 160 Used before OP_ACCEPT to close open captures */ 2124 2125 /* This is used to skip a subpattern with a {0} quantifier */ 2126 2127 OP_SKIPZERO, /* 161 */ 2128 2129 /* This is not an opcode, but is used to check that tables indexed by opcode 2130 are the correct length, in order to catch updating errors - there have been 2131 some in the past. */ 2132 2133 OP_TABLE_LENGTH 2134}; 2135 2136/* *** NOTE NOTE NOTE *** Whenever the list above is updated, the two macro 2137definitions that follow must also be updated to match. There are also tables 2138called "opcode_possessify" in pcre_compile.c and "coptable" and "poptable" in 2139pcre_dfa_exec.c that must be updated. */ 2140 2141 2142/* This macro defines textual names for all the opcodes. These are used only 2143for debugging, and some of them are only partial names. The macro is referenced 2144only in pcre_printint.c, which fills out the full names in many cases (and in 2145some cases doesn't actually use these names at all). */ 2146 2147#define OP_NAME_LIST \ 2148 "End", "\\A", "\\G", "\\K", "\\B", "\\b", "\\D", "\\d", \ 2149 "\\S", "\\s", "\\W", "\\w", "Any", "AllAny", "Anybyte", \ 2150 "notprop", "prop", "\\R", "\\H", "\\h", "\\V", "\\v", \ 2151 "extuni", "\\Z", "\\z", \ 2152 "$", "$", "^", "^", "char", "chari", "not", "noti", \ 2153 "*", "*?", "+", "+?", "?", "??", \ 2154 "{", "{", "{", \ 2155 "*+","++", "?+", "{", \ 2156 "*", "*?", "+", "+?", "?", "??", \ 2157 "{", "{", "{", \ 2158 "*+","++", "?+", "{", \ 2159 "*", "*?", "+", "+?", "?", "??", \ 2160 "{", "{", "{", \ 2161 "*+","++", "?+", "{", \ 2162 "*", "*?", "+", "+?", "?", "??", \ 2163 "{", "{", "{", \ 2164 "*+","++", "?+", "{", \ 2165 "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \ 2166 "*+","++", "?+", "{", \ 2167 "*", "*?", "+", "+?", "?", "??", "{", "{", \ 2168 "*+","++", "?+", "{", \ 2169 "class", "nclass", "xclass", "Ref", "Refi", "DnRef", "DnRefi", \ 2170 "Recurse", "Callout", \ 2171 "Alt", "Ket", "KetRmax", "KetRmin", "KetRpos", \ 2172 "Reverse", "Assert", "Assert not", "AssertB", "AssertB not", \ 2173 "Once", "Once_NC", \ 2174 "Bra", "BraPos", "CBra", "CBraPos", \ 2175 "Cond", \ 2176 "SBra", "SBraPos", "SCBra", "SCBraPos", \ 2177 "SCond", \ 2178 "Cond ref", "Cond dnref", "Cond rec", "Cond dnrec", "Cond def", \ 2179 "Brazero", "Braminzero", "Braposzero", \ 2180 "*MARK", "*PRUNE", "*PRUNE", "*SKIP", "*SKIP", \ 2181 "*THEN", "*THEN", "*COMMIT", "*FAIL", \ 2182 "*ACCEPT", "*ASSERT_ACCEPT", \ 2183 "Close", "Skip zero" 2184 2185 2186/* This macro defines the length of fixed length operations in the compiled 2187regex. The lengths are used when searching for specific things, and also in the 2188debugging printing of a compiled regex. We use a macro so that it can be 2189defined close to the definitions of the opcodes themselves. 2190 2191As things have been extended, some of these are no longer fixed lenths, but are 2192minima instead. For example, the length of a single-character repeat may vary 2193in UTF-8 mode. The code that uses this table must know about such things. */ 2194 2195#define OP_LENGTHS \ 2196 1, /* End */ \ 2197 1, 1, 1, 1, 1, /* \A, \G, \K, \B, \b */ \ 2198 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ \ 2199 1, 1, 1, /* Any, AllAny, Anybyte */ \ 2200 3, 3, /* \P, \p */ \ 2201 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ \ 2202 1, /* \X */ \ 2203 1, 1, 1, 1, 1, 1, /* \Z, \z, $, $M ^, ^M */ \ 2204 2, /* Char - the minimum length */ \ 2205 2, /* Chari - the minimum length */ \ 2206 2, /* not */ \ 2207 2, /* noti */ \ 2208 /* Positive single-char repeats ** These are */ \ 2209 2, 2, 2, 2, 2, 2, /* *, *?, +, +?, ?, ?? ** minima in */ \ 2210 2+IMM2_SIZE, 2+IMM2_SIZE, /* upto, minupto ** mode */ \ 2211 2+IMM2_SIZE, /* exact */ \ 2212 2, 2, 2, 2+IMM2_SIZE, /* *+, ++, ?+, upto+ */ \ 2213 2, 2, 2, 2, 2, 2, /* *I, *?I, +I, +?I, ?I, ??I ** UTF-8 */ \ 2214 2+IMM2_SIZE, 2+IMM2_SIZE, /* upto I, minupto I */ \ 2215 2+IMM2_SIZE, /* exact I */ \ 2216 2, 2, 2, 2+IMM2_SIZE, /* *+I, ++I, ?+I, upto+I */ \ 2217 /* Negative single-char repeats - only for chars < 256 */ \ 2218 2, 2, 2, 2, 2, 2, /* NOT *, *?, +, +?, ?, ?? */ \ 2219 2+IMM2_SIZE, 2+IMM2_SIZE, /* NOT upto, minupto */ \ 2220 2+IMM2_SIZE, /* NOT exact */ \ 2221 2, 2, 2, 2+IMM2_SIZE, /* Possessive NOT *, +, ?, upto */ \ 2222 2, 2, 2, 2, 2, 2, /* NOT *I, *?I, +I, +?I, ?I, ??I */ \ 2223 2+IMM2_SIZE, 2+IMM2_SIZE, /* NOT upto I, minupto I */ \ 2224 2+IMM2_SIZE, /* NOT exact I */ \ 2225 2, 2, 2, 2+IMM2_SIZE, /* Possessive NOT *I, +I, ?I, upto I */ \ 2226 /* Positive type repeats */ \ 2227 2, 2, 2, 2, 2, 2, /* Type *, *?, +, +?, ?, ?? */ \ 2228 2+IMM2_SIZE, 2+IMM2_SIZE, /* Type upto, minupto */ \ 2229 2+IMM2_SIZE, /* Type exact */ \ 2230 2, 2, 2, 2+IMM2_SIZE, /* Possessive *+, ++, ?+, upto+ */ \ 2231 /* Character class & ref repeats */ \ 2232 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ \ 2233 1+2*IMM2_SIZE, 1+2*IMM2_SIZE, /* CRRANGE, CRMINRANGE */ \ 2234 1, 1, 1, 1+2*IMM2_SIZE, /* Possessive *+, ++, ?+, CRPOSRANGE */ \ 2235 1+(32/sizeof(pcre_uchar)), /* CLASS */ \ 2236 1+(32/sizeof(pcre_uchar)), /* NCLASS */ \ 2237 0, /* XCLASS - variable length */ \ 2238 1+IMM2_SIZE, /* REF */ \ 2239 1+IMM2_SIZE, /* REFI */ \ 2240 1+2*IMM2_SIZE, /* DNREF */ \ 2241 1+2*IMM2_SIZE, /* DNREFI */ \ 2242 1+LINK_SIZE, /* RECURSE */ \ 2243 2+2*LINK_SIZE, /* CALLOUT */ \ 2244 1+LINK_SIZE, /* Alt */ \ 2245 1+LINK_SIZE, /* Ket */ \ 2246 1+LINK_SIZE, /* KetRmax */ \ 2247 1+LINK_SIZE, /* KetRmin */ \ 2248 1+LINK_SIZE, /* KetRpos */ \ 2249 1+LINK_SIZE, /* Reverse */ \ 2250 1+LINK_SIZE, /* Assert */ \ 2251 1+LINK_SIZE, /* Assert not */ \ 2252 1+LINK_SIZE, /* Assert behind */ \ 2253 1+LINK_SIZE, /* Assert behind not */ \ 2254 1+LINK_SIZE, /* ONCE */ \ 2255 1+LINK_SIZE, /* ONCE_NC */ \ 2256 1+LINK_SIZE, /* BRA */ \ 2257 1+LINK_SIZE, /* BRAPOS */ \ 2258 1+LINK_SIZE+IMM2_SIZE, /* CBRA */ \ 2259 1+LINK_SIZE+IMM2_SIZE, /* CBRAPOS */ \ 2260 1+LINK_SIZE, /* COND */ \ 2261 1+LINK_SIZE, /* SBRA */ \ 2262 1+LINK_SIZE, /* SBRAPOS */ \ 2263 1+LINK_SIZE+IMM2_SIZE, /* SCBRA */ \ 2264 1+LINK_SIZE+IMM2_SIZE, /* SCBRAPOS */ \ 2265 1+LINK_SIZE, /* SCOND */ \ 2266 1+IMM2_SIZE, 1+2*IMM2_SIZE, /* CREF, DNCREF */ \ 2267 1+IMM2_SIZE, 1+2*IMM2_SIZE, /* RREF, DNRREF */ \ 2268 1, /* DEF */ \ 2269 1, 1, 1, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ \ 2270 3, 1, 3, /* MARK, PRUNE, PRUNE_ARG */ \ 2271 1, 3, /* SKIP, SKIP_ARG */ \ 2272 1, 3, /* THEN, THEN_ARG */ \ 2273 1, 1, 1, 1, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ \ 2274 1+IMM2_SIZE, 1 /* CLOSE, SKIPZERO */ 2275 2276/* A magic value for OP_RREF to indicate the "any recursion" condition. */ 2277 2278#define RREF_ANY 0xffff 2279 2280/* Compile time error code numbers. They are given names so that they can more 2281easily be tracked. When a new number is added, the table called eint in 2282pcreposix.c must be updated. */ 2283 2284enum { ERR0, ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9, 2285 ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19, 2286 ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29, 2287 ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39, 2288 ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49, 2289 ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59, 2290 ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68, ERR69, 2291 ERR70, ERR71, ERR72, ERR73, ERR74, ERR75, ERR76, ERR77, ERR78, ERR79, 2292 ERR80, ERR81, ERR82, ERR83, ERR84, ERR85, ERR86, ERR87, ERRCOUNT }; 2293 2294/* JIT compiling modes. The function list is indexed by them. */ 2295 2296enum { JIT_COMPILE, JIT_PARTIAL_SOFT_COMPILE, JIT_PARTIAL_HARD_COMPILE, 2297 JIT_NUMBER_OF_COMPILE_MODES }; 2298 2299/* The real format of the start of the pcre block; the index of names and the 2300code vector run on as long as necessary after the end. We store an explicit 2301offset to the name table so that if a regex is compiled on one host, saved, and 2302then run on another where the size of pointers is different, all might still 2303be well. 2304 2305The size of the structure must be a multiple of 8 bytes. For the case of 2306compiled-on-4 and run-on-8, we include an extra pointer that is always NULL so 2307that there are an even number of pointers which therefore are a multiple of 8 2308bytes. 2309 2310It is necessary to fork the struct for the 32 bit library, since it needs to 2311use pcre_uint32 for first_char and req_char. We can't put an ifdef inside the 2312typedef because pcretest needs access to the struct of the 8-, 16- and 32-bit 2313variants. 2314 2315*** WARNING *** 2316When new fields are added to these structures, remember to adjust the code in 2317pcre_byte_order.c that is concerned with swapping the byte order of the fields 2318when a compiled regex is reloaded on a host with different endianness. 2319*** WARNING *** 2320There is also similar byte-flipping code in pcretest.c, which is used for 2321testing the byte-flipping features. It must also be kept in step. 2322*** WARNING *** 2323*/ 2324 2325typedef struct real_pcre8_or_16 { 2326 pcre_uint32 magic_number; 2327 pcre_uint32 size; /* Total that was malloced */ 2328 pcre_uint32 options; /* Public options */ 2329 pcre_uint32 flags; /* Private flags */ 2330 pcre_uint32 limit_match; /* Limit set from regex */ 2331 pcre_uint32 limit_recursion; /* Limit set from regex */ 2332 pcre_uint16 first_char; /* Starting character */ 2333 pcre_uint16 req_char; /* This character must be seen */ 2334 pcre_uint16 max_lookbehind; /* Longest lookbehind (characters) */ 2335 pcre_uint16 top_bracket; /* Highest numbered group */ 2336 pcre_uint16 top_backref; /* Highest numbered back reference */ 2337 pcre_uint16 name_table_offset; /* Offset to name table that follows */ 2338 pcre_uint16 name_entry_size; /* Size of any name items */ 2339 pcre_uint16 name_count; /* Number of name items */ 2340 pcre_uint16 ref_count; /* Reference count */ 2341 pcre_uint16 dummy1; /* To ensure size is a multiple of 8 */ 2342 pcre_uint16 dummy2; /* To ensure size is a multiple of 8 */ 2343 pcre_uint16 dummy3; /* To ensure size is a multiple of 8 */ 2344 const pcre_uint8 *tables; /* Pointer to tables or NULL for std */ 2345 void *nullpad; /* NULL padding */ 2346} real_pcre8_or_16; 2347 2348typedef struct real_pcre8_or_16 real_pcre; 2349typedef struct real_pcre8_or_16 real_pcre16; 2350 2351typedef struct real_pcre32 { 2352 pcre_uint32 magic_number; 2353 pcre_uint32 size; /* Total that was malloced */ 2354 pcre_uint32 options; /* Public options */ 2355 pcre_uint32 flags; /* Private flags */ 2356 pcre_uint32 limit_match; /* Limit set from regex */ 2357 pcre_uint32 limit_recursion; /* Limit set from regex */ 2358 pcre_uint32 first_char; /* Starting character */ 2359 pcre_uint32 req_char; /* This character must be seen */ 2360 pcre_uint16 max_lookbehind; /* Longest lookbehind (characters) */ 2361 pcre_uint16 top_bracket; /* Highest numbered group */ 2362 pcre_uint16 top_backref; /* Highest numbered back reference */ 2363 pcre_uint16 name_table_offset; /* Offset to name table that follows */ 2364 pcre_uint16 name_entry_size; /* Size of any name items */ 2365 pcre_uint16 name_count; /* Number of name items */ 2366 pcre_uint16 ref_count; /* Reference count */ 2367 pcre_uint16 dummy; /* To ensure size is a multiple of 8 */ 2368 const pcre_uint8 *tables; /* Pointer to tables or NULL for std */ 2369 void *nullpad; /* NULL padding */ 2370} real_pcre32; 2371 2372#if defined COMPILE_PCRE8 2373#define REAL_PCRE real_pcre 2374#elif defined COMPILE_PCRE16 2375#define REAL_PCRE real_pcre16 2376#elif defined COMPILE_PCRE32 2377#define REAL_PCRE real_pcre32 2378#endif 2379 2380/* Assert that the size of REAL_PCRE is divisible by 8 */ 2381typedef int __assert_real_pcre_size_divisible_8[(sizeof(REAL_PCRE) % 8) == 0 ? 1 : -1]; 2382 2383/* Needed in pcretest to access some fields in the real_pcre* structures 2384 * directly. They're unified for 8/16/32 bits since the structs only differ 2385 * after these fields; if that ever changes, need to fork those defines into 2386 * 8/16 and 32 bit versions. */ 2387#define REAL_PCRE_MAGIC(re) (((REAL_PCRE*)re)->magic_number) 2388#define REAL_PCRE_SIZE(re) (((REAL_PCRE*)re)->size) 2389#define REAL_PCRE_OPTIONS(re) (((REAL_PCRE*)re)->options) 2390#define REAL_PCRE_FLAGS(re) (((REAL_PCRE*)re)->flags) 2391 2392/* The format of the block used to store data from pcre_study(). The same 2393remark (see NOTE above) about extending this structure applies. */ 2394 2395typedef struct pcre_study_data { 2396 pcre_uint32 size; /* Total that was malloced */ 2397 pcre_uint32 flags; /* Private flags */ 2398 pcre_uint8 start_bits[32]; /* Starting char bits */ 2399 pcre_uint32 minlength; /* Minimum subject length */ 2400} pcre_study_data; 2401 2402/* Structure for building a chain of open capturing subpatterns during 2403compiling, so that instructions to close them can be compiled when (*ACCEPT) is 2404encountered. This is also used to identify subpatterns that contain recursive 2405back references to themselves, so that they can be made atomic. */ 2406 2407typedef struct open_capitem { 2408 struct open_capitem *next; /* Chain link */ 2409 pcre_uint16 number; /* Capture number */ 2410 pcre_uint16 flag; /* Set TRUE if recursive back ref */ 2411} open_capitem; 2412 2413/* Structure for building a list of named groups during the first pass of 2414compiling. */ 2415 2416typedef struct named_group { 2417 const pcre_uchar *name; /* Points to the name in the pattern */ 2418 int length; /* Length of the name */ 2419 pcre_uint32 number; /* Group number */ 2420} named_group; 2421 2422/* Structure for passing "static" information around between the functions 2423doing the compiling, so that they are thread-safe. */ 2424 2425typedef struct compile_data { 2426 const pcre_uint8 *lcc; /* Points to lower casing table */ 2427 const pcre_uint8 *fcc; /* Points to case-flipping table */ 2428 const pcre_uint8 *cbits; /* Points to character type table */ 2429 const pcre_uint8 *ctypes; /* Points to table of type maps */ 2430 const pcre_uchar *start_workspace;/* The start of working space */ 2431 const pcre_uchar *start_code; /* The start of the compiled code */ 2432 const pcre_uchar *start_pattern; /* The start of the pattern */ 2433 const pcre_uchar *end_pattern; /* The end of the pattern */ 2434 pcre_uchar *hwm; /* High watermark of workspace */ 2435 open_capitem *open_caps; /* Chain of open capture items */ 2436 named_group *named_groups; /* Points to vector in pre-compile */ 2437 pcre_uchar *name_table; /* The name/number table */ 2438 int names_found; /* Number of entries so far */ 2439 int name_entry_size; /* Size of each entry */ 2440 int named_group_list_size; /* Number of entries in the list */ 2441 int workspace_size; /* Size of workspace */ 2442 unsigned int bracount; /* Count of capturing parens as we compile */ 2443 int final_bracount; /* Saved value after first pass */ 2444 int max_lookbehind; /* Maximum lookbehind (characters) */ 2445 int top_backref; /* Maximum back reference */ 2446 unsigned int backref_map; /* Bitmap of low back refs */ 2447 unsigned int namedrefcount; /* Number of backreferences by name */ 2448 int parens_depth; /* Depth of nested parentheses */ 2449 int assert_depth; /* Depth of nested assertions */ 2450 pcre_uint32 external_options; /* External (initial) options */ 2451 pcre_uint32 external_flags; /* External flag bits to be set */ 2452 int req_varyopt; /* "After variable item" flag for reqbyte */ 2453 BOOL had_accept; /* (*ACCEPT) encountered */ 2454 BOOL had_pruneorskip; /* (*PRUNE) or (*SKIP) encountered */ 2455 BOOL check_lookbehind; /* Lookbehinds need later checking */ 2456 BOOL dupnames; /* Duplicate names exist */ 2457 BOOL dupgroups; /* Duplicate groups exist: (?| found */ 2458 BOOL iscondassert; /* Next assert is a condition */ 2459 int nltype; /* Newline type */ 2460 int nllen; /* Newline string length */ 2461 pcre_uchar nl[4]; /* Newline string when fixed length */ 2462} compile_data; 2463 2464/* Structure for maintaining a chain of pointers to the currently incomplete 2465branches, for testing for left recursion while compiling. */ 2466 2467typedef struct branch_chain { 2468 struct branch_chain *outer; 2469 pcre_uchar *current_branch; 2470} branch_chain; 2471 2472/* Structure for mutual recursion detection. */ 2473 2474typedef struct recurse_check { 2475 struct recurse_check *prev; 2476 const pcre_uchar *group; 2477} recurse_check; 2478 2479/* Structure for items in a linked list that represents an explicit recursive 2480call within the pattern; used by pcre_exec(). */ 2481 2482typedef struct recursion_info { 2483 struct recursion_info *prevrec; /* Previous recursion record (or NULL) */ 2484 unsigned int group_num; /* Number of group that was called */ 2485 int *offset_save; /* Pointer to start of saved offsets */ 2486 int saved_max; /* Number of saved offsets */ 2487 int saved_capture_last; /* Last capture number */ 2488 PCRE_PUCHAR subject_position; /* Position at start of recursion */ 2489} recursion_info; 2490 2491/* A similar structure for pcre_dfa_exec(). */ 2492 2493typedef struct dfa_recursion_info { 2494 struct dfa_recursion_info *prevrec; 2495 int group_num; 2496 PCRE_PUCHAR subject_position; 2497} dfa_recursion_info; 2498 2499/* Structure for building a chain of data for holding the values of the subject 2500pointer at the start of each subpattern, so as to detect when an empty string 2501has been matched by a subpattern - to break infinite loops; used by 2502pcre_exec(). */ 2503 2504typedef struct eptrblock { 2505 struct eptrblock *epb_prev; 2506 PCRE_PUCHAR epb_saved_eptr; 2507} eptrblock; 2508 2509 2510/* Structure for passing "static" information around between the functions 2511doing traditional NFA matching, so that they are thread-safe. */ 2512 2513typedef struct match_data { 2514 unsigned long int match_call_count; /* As it says */ 2515 unsigned long int match_limit; /* As it says */ 2516 unsigned long int match_limit_recursion; /* As it says */ 2517 int *offset_vector; /* Offset vector */ 2518 int offset_end; /* One past the end */ 2519 int offset_max; /* The maximum usable for return data */ 2520 int nltype; /* Newline type */ 2521 int nllen; /* Newline string length */ 2522 int name_count; /* Number of names in name table */ 2523 int name_entry_size; /* Size of entry in names table */ 2524 unsigned int skip_arg_count; /* For counting SKIP_ARGs */ 2525 unsigned int ignore_skip_arg; /* For re-run when SKIP arg name not found */ 2526 pcre_uchar *name_table; /* Table of names */ 2527 pcre_uchar nl[4]; /* Newline string when fixed */ 2528 const pcre_uint8 *lcc; /* Points to lower casing table */ 2529 const pcre_uint8 *fcc; /* Points to case-flipping table */ 2530 const pcre_uint8 *ctypes; /* Points to table of type maps */ 2531 BOOL notbol; /* NOTBOL flag */ 2532 BOOL noteol; /* NOTEOL flag */ 2533 BOOL utf; /* UTF-8 / UTF-16 flag */ 2534 BOOL jscript_compat; /* JAVASCRIPT_COMPAT flag */ 2535 BOOL use_ucp; /* PCRE_UCP flag */ 2536 BOOL endonly; /* Dollar not before final \n */ 2537 BOOL notempty; /* Empty string match not wanted */ 2538 BOOL notempty_atstart; /* Empty string match at start not wanted */ 2539 BOOL hitend; /* Hit the end of the subject at some point */ 2540 BOOL bsr_anycrlf; /* \R is just any CRLF, not full Unicode */ 2541 BOOL hasthen; /* Pattern contains (*THEN) */ 2542 const pcre_uchar *start_code; /* For use when recursing */ 2543 PCRE_PUCHAR start_subject; /* Start of the subject string */ 2544 PCRE_PUCHAR end_subject; /* End of the subject string */ 2545 PCRE_PUCHAR start_match_ptr; /* Start of matched string */ 2546 PCRE_PUCHAR end_match_ptr; /* Subject position at end match */ 2547 PCRE_PUCHAR start_used_ptr; /* Earliest consulted character */ 2548 int partial; /* PARTIAL options */ 2549 int end_offset_top; /* Highwater mark at end of match */ 2550 pcre_int32 capture_last; /* Most recent capture number + overflow flag */ 2551 int start_offset; /* The start offset value */ 2552 int match_function_type; /* Set for certain special calls of MATCH() */ 2553 eptrblock *eptrchain; /* Chain of eptrblocks for tail recursions */ 2554 int eptrn; /* Next free eptrblock */ 2555 recursion_info *recursive; /* Linked list of recursion data */ 2556 void *callout_data; /* To pass back to callouts */ 2557 const pcre_uchar *mark; /* Mark pointer to pass back on success */ 2558 const pcre_uchar *nomatch_mark;/* Mark pointer to pass back on failure */ 2559 const pcre_uchar *once_target; /* Where to back up to for atomic groups */ 2560#ifdef NO_RECURSE 2561 void *match_frames_base; /* For remembering malloc'd frames */ 2562#endif 2563} match_data; 2564 2565/* A similar structure is used for the same purpose by the DFA matching 2566functions. */ 2567 2568typedef struct dfa_match_data { 2569 const pcre_uchar *start_code; /* Start of the compiled pattern */ 2570 const pcre_uchar *start_subject ; /* Start of the subject string */ 2571 const pcre_uchar *end_subject; /* End of subject string */ 2572 const pcre_uchar *start_used_ptr; /* Earliest consulted character */ 2573 const pcre_uint8 *tables; /* Character tables */ 2574 int start_offset; /* The start offset value */ 2575 int moptions; /* Match options */ 2576 int poptions; /* Pattern options */ 2577 int nltype; /* Newline type */ 2578 int nllen; /* Newline string length */ 2579 pcre_uchar nl[4]; /* Newline string when fixed */ 2580 void *callout_data; /* To pass back to callouts */ 2581 dfa_recursion_info *recursive; /* Linked list of recursion data */ 2582} dfa_match_data; 2583 2584/* Bit definitions for entries in the pcre_ctypes table. */ 2585 2586#define ctype_space 0x01 2587#define ctype_letter 0x02 2588#define ctype_digit 0x04 2589#define ctype_xdigit 0x08 2590#define ctype_word 0x10 /* alphanumeric or '_' */ 2591#define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */ 2592 2593/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set 2594of bits for a class map. Some classes are built by combining these tables. */ 2595 2596#define cbit_space 0 /* [:space:] or \s */ 2597#define cbit_xdigit 32 /* [:xdigit:] */ 2598#define cbit_digit 64 /* [:digit:] or \d */ 2599#define cbit_upper 96 /* [:upper:] */ 2600#define cbit_lower 128 /* [:lower:] */ 2601#define cbit_word 160 /* [:word:] or \w */ 2602#define cbit_graph 192 /* [:graph:] */ 2603#define cbit_print 224 /* [:print:] */ 2604#define cbit_punct 256 /* [:punct:] */ 2605#define cbit_cntrl 288 /* [:cntrl:] */ 2606#define cbit_length 320 /* Length of the cbits table */ 2607 2608/* Offsets of the various tables from the base tables pointer, and 2609total length. */ 2610 2611#define lcc_offset 0 2612#define fcc_offset 256 2613#define cbits_offset 512 2614#define ctypes_offset (cbits_offset + cbit_length) 2615#define tables_length (ctypes_offset + 256) 2616 2617/* Internal function and data prefixes. */ 2618 2619#if defined COMPILE_PCRE8 2620#ifndef PUBL 2621#define PUBL(name) pcre_##name 2622#endif 2623#ifndef PRIV 2624#define PRIV(name) _pcre_##name 2625#endif 2626#elif defined COMPILE_PCRE16 2627#ifndef PUBL 2628#define PUBL(name) pcre16_##name 2629#endif 2630#ifndef PRIV 2631#define PRIV(name) _pcre16_##name 2632#endif 2633#elif defined COMPILE_PCRE32 2634#ifndef PUBL 2635#define PUBL(name) pcre32_##name 2636#endif 2637#ifndef PRIV 2638#define PRIV(name) _pcre32_##name 2639#endif 2640#else 2641#error Unsupported compiling mode 2642#endif /* COMPILE_PCRE[8|16|32] */ 2643 2644/* Layout of the UCP type table that translates property names into types and 2645codes. Each entry used to point directly to a name, but to reduce the number of 2646relocations in shared libraries, it now has an offset into a single string 2647instead. */ 2648 2649typedef struct { 2650 pcre_uint16 name_offset; 2651 pcre_uint16 type; 2652 pcre_uint16 value; 2653} ucp_type_table; 2654 2655 2656/* Internal shared data tables. These are tables that are used by more than one 2657of the exported public functions. They have to be "external" in the C sense, 2658but are not part of the PCRE public API. The data for these tables is in the 2659pcre_tables.c module. */ 2660 2661#ifdef COMPILE_PCRE8 2662extern const int PRIV(utf8_table1)[]; 2663extern const int PRIV(utf8_table1_size); 2664extern const int PRIV(utf8_table2)[]; 2665extern const int PRIV(utf8_table3)[]; 2666extern const pcre_uint8 PRIV(utf8_table4)[]; 2667#endif /* COMPILE_PCRE8 */ 2668 2669extern const char PRIV(utt_names)[]; 2670extern const ucp_type_table PRIV(utt)[]; 2671extern const int PRIV(utt_size); 2672 2673extern const pcre_uint8 PRIV(OP_lengths)[]; 2674extern const pcre_uint8 PRIV(default_tables)[]; 2675 2676extern const pcre_uint32 PRIV(hspace_list)[]; 2677extern const pcre_uint32 PRIV(vspace_list)[]; 2678 2679 2680/* Internal shared functions. These are functions that are used by more than 2681one of the exported public functions. They have to be "external" in the C 2682sense, but are not part of the PCRE public API. */ 2683 2684/* String comparison functions. */ 2685#if defined COMPILE_PCRE8 2686 2687#define STRCMP_UC_UC(str1, str2) \ 2688 strcmp((char *)(str1), (char *)(str2)) 2689#define STRCMP_UC_C8(str1, str2) \ 2690 strcmp((char *)(str1), (str2)) 2691#define STRNCMP_UC_UC(str1, str2, num) \ 2692 strncmp((char *)(str1), (char *)(str2), (num)) 2693#define STRNCMP_UC_C8(str1, str2, num) \ 2694 strncmp((char *)(str1), (str2), (num)) 2695#define STRLEN_UC(str) strlen((const char *)str) 2696 2697#elif defined COMPILE_PCRE16 || defined COMPILE_PCRE32 2698 2699extern int PRIV(strcmp_uc_uc)(const pcre_uchar *, 2700 const pcre_uchar *); 2701extern int PRIV(strcmp_uc_c8)(const pcre_uchar *, 2702 const char *); 2703extern int PRIV(strncmp_uc_uc)(const pcre_uchar *, 2704 const pcre_uchar *, unsigned int num); 2705extern int PRIV(strncmp_uc_c8)(const pcre_uchar *, 2706 const char *, unsigned int num); 2707extern unsigned int PRIV(strlen_uc)(const pcre_uchar *str); 2708 2709#define STRCMP_UC_UC(str1, str2) \ 2710 PRIV(strcmp_uc_uc)((str1), (str2)) 2711#define STRCMP_UC_C8(str1, str2) \ 2712 PRIV(strcmp_uc_c8)((str1), (str2)) 2713#define STRNCMP_UC_UC(str1, str2, num) \ 2714 PRIV(strncmp_uc_uc)((str1), (str2), (num)) 2715#define STRNCMP_UC_C8(str1, str2, num) \ 2716 PRIV(strncmp_uc_c8)((str1), (str2), (num)) 2717#define STRLEN_UC(str) PRIV(strlen_uc)(str) 2718 2719#endif /* COMPILE_PCRE[8|16|32] */ 2720 2721#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16 2722 2723#define STRCMP_UC_UC_TEST(str1, str2) STRCMP_UC_UC(str1, str2) 2724#define STRCMP_UC_C8_TEST(str1, str2) STRCMP_UC_C8(str1, str2) 2725 2726#elif defined COMPILE_PCRE32 2727 2728extern int PRIV(strcmp_uc_uc_utf)(const pcre_uchar *, 2729 const pcre_uchar *); 2730extern int PRIV(strcmp_uc_c8_utf)(const pcre_uchar *, 2731 const char *); 2732 2733#define STRCMP_UC_UC_TEST(str1, str2) \ 2734 (utf ? PRIV(strcmp_uc_uc_utf)((str1), (str2)) : PRIV(strcmp_uc_uc)((str1), (str2))) 2735#define STRCMP_UC_C8_TEST(str1, str2) \ 2736 (utf ? PRIV(strcmp_uc_c8_utf)((str1), (str2)) : PRIV(strcmp_uc_c8)((str1), (str2))) 2737 2738#endif /* COMPILE_PCRE[8|16|32] */ 2739 2740extern const pcre_uchar *PRIV(find_bracket)(const pcre_uchar *, BOOL, int); 2741extern BOOL PRIV(is_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR, 2742 int *, BOOL); 2743extern unsigned int PRIV(ord2utf)(pcre_uint32, pcre_uchar *); 2744extern int PRIV(valid_utf)(PCRE_PUCHAR, int, int *); 2745extern BOOL PRIV(was_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR, 2746 int *, BOOL); 2747extern BOOL PRIV(xclass)(pcre_uint32, const pcre_uchar *, BOOL); 2748 2749#ifdef SUPPORT_JIT 2750extern void PRIV(jit_compile)(const REAL_PCRE *, 2751 PUBL(extra) *, int); 2752extern int PRIV(jit_exec)(const PUBL(extra) *, 2753 const pcre_uchar *, int, int, int, int *, int); 2754extern void PRIV(jit_free)(void *); 2755extern int PRIV(jit_get_size)(void *); 2756extern const char* PRIV(jit_get_target)(void); 2757#endif 2758 2759/* Unicode character database (UCD) */ 2760 2761typedef struct { 2762 pcre_uint8 script; /* ucp_Arabic, etc. */ 2763 pcre_uint8 chartype; /* ucp_Cc, etc. (general categories) */ 2764 pcre_uint8 gbprop; /* ucp_gbControl, etc. (grapheme break property) */ 2765 pcre_uint8 caseset; /* offset to multichar other cases or zero */ 2766 pcre_int32 other_case; /* offset to other case, or zero if none */ 2767} ucd_record; 2768 2769extern const pcre_uint32 PRIV(ucd_caseless_sets)[]; 2770extern const ucd_record PRIV(ucd_records)[]; 2771extern const pcre_uint8 PRIV(ucd_stage1)[]; 2772extern const pcre_uint16 PRIV(ucd_stage2)[]; 2773extern const pcre_uint32 PRIV(ucp_gentype)[]; 2774extern const pcre_uint32 PRIV(ucp_gbtable)[]; 2775#ifdef SUPPORT_JIT 2776extern const int PRIV(ucp_typerange)[]; 2777#endif 2778 2779#ifdef SUPPORT_UCP 2780/* UCD access macros */ 2781 2782#define UCD_BLOCK_SIZE 128 2783#define GET_UCD(ch) (PRIV(ucd_records) + \ 2784 PRIV(ucd_stage2)[PRIV(ucd_stage1)[(int)(ch) / UCD_BLOCK_SIZE] * \ 2785 UCD_BLOCK_SIZE + (int)(ch) % UCD_BLOCK_SIZE]) 2786 2787#define UCD_CHARTYPE(ch) GET_UCD(ch)->chartype 2788#define UCD_SCRIPT(ch) GET_UCD(ch)->script 2789#define UCD_CATEGORY(ch) PRIV(ucp_gentype)[UCD_CHARTYPE(ch)] 2790#define UCD_GRAPHBREAK(ch) GET_UCD(ch)->gbprop 2791#define UCD_CASESET(ch) GET_UCD(ch)->caseset 2792#define UCD_OTHERCASE(ch) ((pcre_uint32)((int)ch + (int)(GET_UCD(ch)->other_case))) 2793 2794#endif /* SUPPORT_UCP */ 2795 2796#endif 2797 2798/* End of pcre_internal.h */ 2799