1# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2# 2000, 2001, 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. 3 4# This program is free software; you can redistribute it and/or modify 5# it under the terms of the GNU General Public License as published by 6# the Free Software Foundation; either version 3 of the License, or 7# (at your option) any later version. 8# 9# This program is distributed in the hope that it will be useful, 10# but WITHOUT ANY WARRANTY; without even the implied warranty of 11# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12# GNU General Public License for more details. 13# 14# You should have received a copy of the GNU General Public License 15# along with this program. If not, see <http://www.gnu.org/licenses/>. 16 17# Please email any bugs, comments, and/or additions to this file to: 18# bug-gdb@prep.ai.mit.edu 19 20# Start with a fresh gdb 21 22gdb_exit 23gdb_start 24 25set timeout 60 26 27# 28# test default actions of gdb commands 29# 30 31#load_lib gdb.exp 32 33gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file" 34 35# test append 36gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*" 37gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*" 38gdb_test "append memory" "Missing filename\." 39gdb_test "append value" "Missing filename\." 40gdb_test "append binary memory" "Missing filename\." 41gdb_test "append binary value" "Missing filename\." 42 43setup_xfail "mips-idt-*" 44send_gdb "attach\n" 45gdb_expect { 46 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ 47 { pass "attach" } 48 -re "You can't do that when your target is `None'.*$gdb_prompt $"\ 49 { pass "attach" } 50 -re "You can't do that without a process to debug.*$gdb_prompt $"\ 51 { pass "attach" } 52 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ 53 { pass "attach" } 54 -re "Kill it. .y or n." { 55 send_gdb "y\n" 56 exp_continue 57 } 58 -re "$gdb_prompt $" { fail "attach" } 59 timeout { fail "(timeout) attach" } 60} 61 62if ![target_info exists use_gdb_stub] { 63 gdb_test "break" "No default breakpoint address now." "break" 64 foreach i "b br bre brea" { 65 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation" 66 } 67 68 69 setup_xfail "mips-idt-*" 70 gdb_test "backtrace" "No stack." 71 72 # ba and bac are no longer unique command prefixes. So these tests 73 # elict an error from GDB. 74 # GDB needs to be fixed to map unique alias here for ba bac. 75 # 76 foreach i "bt ba bac" { 77 setup_xfail "mips-idt-*" 78 gdb_test $i "No stack." "backtrace \"$i\" abbreviation" 79 } 80} else { 81 warning "Skipping backtrace and break tests because of GDB stub." 82} 83 84# This works on the MIPS IDT board, but confuses future tests. 85if ![istarget "mips-idt-*"] then { 86 gdb_test "continue" "The program is not being run." "continue" 87 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" 88} 89 90#test call 91gdb_test "call" "The history is empty..*" "call" 92 93 94#test catch 95gdb_test "catch" "Catch requires an event name..*" "catch" 96 97#test cd 98gdb_test "cd" "Argument required .new working directory.*" "cd" 99 100#test clear 101gdb_test "clear" "No source file specified..*" "clear" 102 103#test commands 104gdb_test "commands" "No breakpoint number 0..*" "commands" 105 106#test condition 107gdb_test "condition" "Argument required .breakpoint number.*" "condition" 108 109#test core-file 110gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file" 111#test delete "d" abbreviation 112gdb_test "d" "" "delete \"d\" abbreviation" 113#test delete 114gdb_test "delete" "" "delete" 115#test define 116gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define" 117#test delete breakpoints 118gdb_test "delete breakpoints" "" "delete breakpoints" 119#test delete display 120# FIXME -- need to dump full output to detailed log 121send_gdb "delete display\n" 122gdb_expect { 123 -re "Delete all auto-display expressions.*y or n. $" { 124 send_gdb "y\n" 125 gdb_expect { 126 -re "$gdb_prompt $" { pass "delete display prompt" } 127 timeout { fail "(timeout) delete display prompt" } 128 } 129 } 130 timeout { fail "(timeout) delete display prompt" } 131 132} 133 134#test detach 135gdb_test "detach" "" "detach" 136 137if [istarget "h8300-*-hms"] then { 138 gdb_exit 139 gdb_start 140} 141 142#test directory 143# FIXME -- need to dump full output to detailed log 144 145send_gdb "directory\n" 146gdb_expect { 147 -re "Reinitialize source path to empty.*y or n. $" { 148 send_gdb "y\n" 149 gdb_expect { 150 -re "Source directories searched: .cdir\[:;\].cwd.*$gdb_prompt $"\ 151 { pass "directory prompt" } 152 timeout { fail "(timeout) directory prompt" } 153 } 154 } 155} 156 157#test disable "dis" abbreviation 158gdb_test "dis" "" "disable \"dis\" abbreviation" 159#test disable "disa" abbreviation 160gdb_test "disa" "" "disable \"disa\" abbreviation" 161#test disable 162gdb_test "disable" "" "disable" 163#test disable breakpoints 164gdb_test "disable breakpoints" "" "disable breakpoints" 165#test disable display 166gdb_test "disable display" "" "disable display" 167#test disassemble 168gdb_test "disassemble" "No frame selected." "disassemble" 169#test display 170gdb_test "display" "" "display" 171#test do 172gdb_test "do" "No stack." "do" 173#test document 174gdb_test "document" "Argument required .name of command to define.*" "document" 175#test down 176gdb_test "down" "No stack.*" "down" 177#test down-silently 178gdb_test "down-silently" "No stack." "down-silently" 179# test dump 180gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*" 181gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*" 182gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*" 183gdb_test "dump memory" "Missing filename\." 184gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*" 185gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*" 186gdb_test "dump value" "Missing filename\." 187gdb_test "dump binary memory" "Missing filename\." 188gdb_test "dump binary value" "Missing filename\." 189gdb_test "dump ihex memory" "Missing filename\." 190gdb_test "dump ihex value" "Missing filename\." 191gdb_test "dump srec memory" "Missing filename\." 192gdb_test "dump srec value" "Missing filename\." 193gdb_test "dump tekhex memory" "Missing filename\." 194gdb_test "dump tekhex value" "Missing filename\." 195#test echo 196gdb_test "echo" "" "echo" 197#test enable breakpoints delete 198gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete" 199#test enable breakpoints once 200gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once" 201#test enable breakpoints 202gdb_test "enable breakpoints" "" "enable breakpoints" 203#test enable delete 204gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete" 205#test enable display 206gdb_test "enable display" "" "enable display" 207#test enable once 208gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once" 209#test enable 210gdb_test "enable" "" "enable" 211#test exec-file 212send_gdb "exec-file\n" 213gdb_expect { 214 -re "No executable file now..*$gdb_prompt $" { 215 pass "exec-file" 216 } 217 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" { 218 send_gdb "n\n" 219 if $verbose>1 then { 220 send_user "\tDidn't kill program being debugged\n" 221 } 222 gdb_expect -re "$gdb_prompt $" { } 223 pass "exec-file" 224 } 225 -re "$gdb_prompt $" { fail "exec-file" } 226 timeout { fail "(timeout) exec-file" } 227} 228 229#test frame "f" abbreviation 230gdb_test "f" "No stack." "frame \"f\" abbreviation" 231#test frame 232gdb_test "frame" "No stack." "frame" 233#test fg 234gdb_test "fg" "The program is not being run." "fg" 235# FIXME: fg kills the udi connection 236#test file 237send_gdb "file\n" 238gdb_expect { 239 -re "No executable file now..*$gdb_prompt $"\ 240 { pass "file" } 241 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 242 send_gdb "n\n" 243 if $verbose>1 then { 244 send_user "\t\tDidn't kill program being debugged\n" 245 } 246 gdb_expect -re "$gdb_prompt $" { } 247 pass "file" 248 } 249 -re ".*$gdb_prompt $" { fail "file" } 250 timeout { fail "(timeout) file" } 251} 252 253#test finish 254gdb_test "finish" "The program is not running." "finish" 255#test forward-search 256# The message here comes from the regexp library, not gdb, and so can 257# vary on different systems. 258gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search" 259#test gcore 260send_gdb "gcore\n" 261gdb_expect { 262 -re "You can\'t do that without a process to debug.*$gdb_prompt $" { 263 pass "gcore" 264 } 265 -re "Undefined command: .*$gdb_prompt $" { 266 pass "gcore" 267 } 268 default { fail "gcore" } 269} 270send_gdb "generate-core-file\n" 271gdb_expect { 272 -re "You can\'t do that without a process to debug.*$gdb_prompt $" { 273 pass "generate-core-file" 274 } 275 -re "Undefined command: .*$gdb_prompt $" { 276 pass "generate-core-file" 277 } 278 default { fail "generate-core-file" } 279} 280#test help "h" abbreviation 281gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" 282#test help 283gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help" 284#test handle 285gdb_test "handle" "Argument required .signal to handle.*" "handle" 286#test info "i" abbreviation 287gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" 288#test info 289gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info" 290#test ignore 291gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore" 292#test info address 293gdb_test "info address" "Argument required." "info address" 294#test info all-registers 295gdb_test "info all-registers" "The program has no registers now." "info all-registers" 296#test info args 297gdb_test "info args" "No frame selected." "info args" 298#test info bogus-gdb-command 299gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command" 300#test info breakpoints 301gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints" 302#test info catch 303gdb_test "info catch" "You can't do that without a process to debug." "info catch" 304#test info copying 305# FIXME -- doesn't work worth a shit 306#send_gdb "info copying" 307# -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# 308gdb_test "info copying" 309# } 310# 311# 312#test info display 313gdb_test "info display" "There are no auto-display expressions now." "info display" 314#test info frame "f" abbreviation 315gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation" 316#test info frame 317gdb_test "info frame" "No stack.|No selected frame." "info frame" 318#test info files 319gdb_test "info files" "" "info files" 320#test info float 321gdb_test "info float" "The program has no registers now." "info float" 322#test info functions 323gdb_test "info functions" "All defined functions:" "info functions" 324#test info locals 325gdb_test "info locals" "No frame selected." "info locals" 326#test info program 327gdb_test "info program" "The program being debugged is not being run." "info program" 328#test info registers 329gdb_test "info registers" "The program has no registers now." "info registers" 330#test info stack "s" abbreviation 331gdb_test "info s" "No stack." "info stack \"s\" abbreviation" 332#test info stack 333gdb_test "info stack" "No stack." "info stack" 334#test info set 335# FIXME -- needs to match the entire output 336# FIXME -- on native solaris 2.8, this test fails due to this line: 337# prompt: Gdb's prompt is "(gdb) ".^M 338gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10.*" "info set" 339gdb_test "info symbol" "Argument required .address.." 340#test info source 341gdb_test "info source" "No current source file..*" "info source" 342#test info sources 343gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources" 344#test info target 345gdb_test "info target" "" "info target" 346#test info terminal 347gdb_test "info terminal" "No saved terminal information." "info terminal" 348#test info types 349gdb_test "info types" "All defined types:" "info types" 350#test info variables 351gdb_test "info variables" "All defined variables:" "info variables" 352#test info vector 353gdb_test "info vector" "The program has no registers now." "info vector" 354#test info warranty 355gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty" 356#test info watchpoints 357gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints" 358#test inspect 359gdb_test "inspect" "The history is empty." "inspect" 360#test jump 361gdb_test "jump" "The program is not being run." "jump" 362#test kill 363gdb_test "kill" "The program is not being run." "kill" 364#test list "l" abbreviation 365gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation" 366#test list 367gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list" 368#test load 369# The ``takes a file name'' case is for vxgdb. 370# The ``Use the "file" command'' case is for newer GDB versions which try 371# to deduce the filename from the exec file. 372gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load" 373#test next "n" abbreviation 374gdb_test "n" "The program is not being run." "next \"n\" abbreviation" 375#test next 376gdb_test "next" "The program is not being run." "next" 377#test nexti "ni" abbreviation 378gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation" 379#test nexti 380gdb_test "nexti" "The program is not being run." "nexti" 381#test output 382gdb_test "output" "Argument required .expression to compute.*" "output" 383 384#test overlay 385gdb_test "overlay" "\"overlay\" must be followed by the name of .*" 386#test a non-existant overlay subcommand 387gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." 388gdb_test "overlay manual" "" "overlay manual #1" 389gdb_test "overlay auto" "" 390gdb_test "overlay off" "" 391gdb_test "overlay list" "No sections are mapped." 392gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" 393gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" 394gdb_test "overlay manual" "" "overlay manual #2" 395gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" 396gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" 397 398#test print "p" abbreviation 399gdb_test "p" "The history is empty." "print \"p\" abbreviation" 400#test print 401gdb_test "print" "The history is empty." "print" 402#test printf 403gdb_test "printf" "Argument required .format-control string and values to print.*" "printf" 404#test ptype 405gdb_test "ptype" "The history is empty." "ptype" 406#test pwd 407gdb_test "pwd" "Working directory .*" "pwd" 408 409#test run "r" abbreviation 410if [istarget "*-*-vxworks*"] then { 411 gdb_test "set args" "" "" 412 413 gdb_test "r" "Starting program: .* 414You must specify a function name to run, and arguments if any"\ 415 "run \"r\" abbreviation" 416 gdb_test "set args main" "" "" 417 418} else { 419 send_gdb "r\n" 420 gdb_expect { 421 -re "Starting program: .* 422You can't do that when your target is `None'.*$gdb_prompt $"\ 423 { pass "run \"r\" abbreviation" } 424 -re "Starting program: .* 425No executable file specified.* 426Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ 427 { pass "run \"r\" abbreviation" } 428 -re "Starting program: .* 429No executable specified, use .target exec.\\..*$gdb_prompt $"\ 430 { pass "run \"r\" abbreviation" } 431 -re "Starting program: .* 432No image loaded into target.*$gdb_prompt $"\ 433 { pass "run \"r\" abbreviation" } 434 -re "Starting program: .* 435No program loaded.*$gdb_prompt $"\ 436 { pass "run \"r\" abbreviation" } 437 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ 438 { pass "run \"r\" abbreviation" } 439 -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" } 440 timeout { fail "(timeout) run \"r\" abbreviation" } 441 } 442} 443 444#test run 445if [istarget "*-*-vxworks*"] then { 446 gdb_test "set args" "" "" 447 448 gdb_test "run" "Starting program: .* 449You must specify a function name to run, and arguments if any" 450 gdb_test "set args main" "" "" 451 452} else { 453 send_gdb "run\n" 454 gdb_expect { 455 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" } 456 -re "Starting program: .* 457No executable file specified.* 458Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ 459 { pass "run" } 460 -re "Starting program: .* 461No executable specified, use .target exec.\\..*$gdb_prompt $"\ 462 { pass "run" } 463 -re "Starting program: .* 464No image loaded into target.*$gdb_prompt $"\ 465 { pass "run" } 466 -re "Starting program: .* 467No program loaded.*$gdb_prompt $"\ 468 { pass "run \"r\" abbreviation" } 469 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ 470 { pass "run" } 471 -re ".*$gdb_prompt $" { fail "run" } 472 timeout { fail "(timeout) run" } 473 } 474} 475 476#test rbreak 477gdb_test "rbreak" "" "rbreak" 478 479# test restore 480gdb_test "restore" "You can't do that without a process to debug\." 481 482#test return 483# The middle case accomodated the obsolete a29k, where doing the "ni" 484# above causes an initial stack to be created. 485gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y" 486 487 488#test reverse-search 489gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search" 490#test step "s" abbreviation 491gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1" 492#test step 493gdb_test "step" "The program is not being run." "step #1" 494#test search 495gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search" 496#test section 497gdb_test "section" "Must specify section name and its virtual address.*" "section" 498#test set annotate 499gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate" 500#test set args 501gdb_test "set args" "" "set args" 502#test set check "c" abbreviation 503gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation" 504#test set check "ch" abbreviation 505gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation" 506#test set check 507gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check" 508#test set check range 509gdb_test "set check range" "" "set check range" 510#test set check type 511gdb_test "set check type" "" "set check type" 512#test set complaints 513gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints" 514#test set confirm 515gdb_test "set confirm" "" "set confirm" 516# Don't test set editing. What if we're talking to a gdb that 517# won't do editing correctly while we're talking to it? 518# gdb_test "set editing" "" "set editing" 519 520#test set environment 521gdb_test "set environment" "Argument required .environment variable and value.*" "set environment" 522#test set height 523gdb_test "set height" "Argument required .integer to set it to.*" "set height" 524#test set history expansion 525gdb_test "set history expansion" "" "set history expansion" 526#test set history filename 527gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" 528#test set history save 529gdb_test "set history save" "" "set history save" 530#test set history size 531gdb_test "set history size" "Argument required .integer to set it to.*" "set history size" 532#test set history 533gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history" 534#test set language 535gdb_test "set language" "The currently understood settings are:(\[^\r\n\]*\[\r\n\])+local or auto *Automatic setting based on source file(\[^\r\n\]*\[\r\n\])+c *Use the C language(\[^\r\n\]*\[\r\n\])+c\[+\]+ *Use the C\[+\]+ language(\[^\r\n\]*\[\r\n\])+modula-2 *Use the Modula-2 language.*" "set language" 536#test set listsize 537gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize" 538#test set print "p" abbreviation 539gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" 540#test set print "pr" abbreviation 541gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" 542#test set print 543gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print" 544#test set print address 545gdb_test "set print address" "" "set print address" 546#test set print array 547gdb_test "set print array" "" "set print array" 548#test set print asm-demangle 549gdb_test "set print asm-demangle" "" "set print asm-demangle" 550#test set print demangle 551gdb_test "set print demangle" "" "set print demangle" 552#test set print elements 553gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements" 554#test set print object 555gdb_test "set print object" "" "set print object" 556#test set print pretty 557gdb_test "set print pretty" "" "set print pretty" 558#test set print sevenbit-strings 559gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings" 560#test set print union 561gdb_test "set print union" "" "set print union" 562#test set print vtbl 563gdb_test "set print vtbl" "" "set print vtbl" 564# FIXME -- need a test for "set prompt" 565#test set radix 566gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix" 567#test set symbol-reloading 568gdb_test "set symbol-reloading" "" "set symbol-reloading" 569#test set variable 570gdb_test "set variable" "Argument required .expression to compute.*" "set variable" 571#test set verbose 572gdb_test "set verbose" "" "set verbose" 573#test set width 574gdb_test "set width" "Argument required .integer to set it to.*" "set width" 575#test set write 576# This is only supported on targets which use exec.o. 577gdb_test "set write" "" "set write" 578#test set 579gdb_test "set" "Argument required .expression to compute.*" "set" 580#test shell echo Hi dad! 581gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!" 582#test show annotate 583gdb_test "show annotate" "Annotation_level is 0." "show annotate" 584#test show args 585gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args" 586#test show check "c" abbreviation 587gdb_test "show c" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation" 588#test show check "ch" abbreviation 589gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation" 590#test show check 591gdb_test "show check" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check" 592#test show check range 593gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range" 594#test show check type 595gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type" 596#test show commands 597gdb_test "show commands" "" "show commands" 598#test show complaints 599gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints" 600#test show confirm 601gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm" 602#test show convenience 603gdb_test "show convenience" "No debugger convenience variables now defined.(\[^\r\n\]*\[\r\n\])+Convenience variables have names starting with \".\";(\[^\r\n\]*\[\r\n\])+use \"set\" as in \"set .foo = 5\" to define them." "show convenience" 604#test show directories 605gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories" 606#test show editing 607gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing" 608#test show height 609gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height" 610#test show history expansion 611gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion" 612#test show history filename 613gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename" 614#test show history save 615gdb_test "show history save" "Saving of the history record on exit is on." "show history save" 616#test show history size 617gdb_test "show history size" "The size of the command history is.*" "show history size" 618#test show history 619gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history" 620#test show language 621gdb_test "show language" "The current source language is \"auto; currently c\"." "show language" 622#test show listsize 623gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize" 624#test show print "p" abbreviation 625gdb_test "show p" ".*" "show p" 626#test show print "pr" abbreviation 627gdb_test "show pr" ".*" "show pr" 628#test show print 629gdb_test "show print" "" "show print" 630#test show paths 631gdb_test "show paths" "Executable and object file path:.*" "show paths" 632#test show print address 633gdb_test "show print address" "Printing of addresses is on." "show print address" 634#test show print array 635gdb_test "show print array" "Prettyprinting of arrays is on." "show print array" 636#test show print asm-demangle 637gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle" 638#test show print demangle 639gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle" 640#test show print elements 641gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements" 642#test show print object 643gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object" 644#test show print pretty 645gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty" 646#test show print sevenbit-strings 647gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings" 648#test show print union 649gdb_test "show print union" "Printing of unions interior to structures is on." "show print union" 650#test show print vtbl 651gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl" 652#test show prompt 653# In the FAIL case, can't just look for $gdb_prompt because that will match 654# the output, rather than the prompt. So look for $gdb_prompt at the start 655# of a line. 656gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt" 657#test show radix 658gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix" 659#test show symbol-reloading 660gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading" 661#test show user 662gdb_test "show user" "" "show user" 663#test show values 664gdb_test "show values" "" "show values" 665#test show verbose 666gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose" 667#test show version 668gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version" 669#test show width 670gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width" 671#test show write 672# This is only supported on targets which use exec.o. 673gdb_test "show write" "Writing into executable and core files is o.*" "show write" 674#test show 675gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200..*" "show" 676#test stepi "si" abbreviation 677gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation" 678#test stepi 679gdb_test "stepi" "The program is not being run." "stepi" 680#test signal 681gdb_test "signal" "The program is not being run." "signal" 682#test source 683gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source" 684#test step "s" abbreviation 685gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2" 686#test step 687gdb_test "step" "The program is not being run." "step #2" 688#test symbol-file 689gdb_test "symbol-file" "" "symbol-file" 690 691#test target child 692gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child" 693 694#test target procfs 695gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs" 696 697#test target core 698send_gdb "target core\n" 699gdb_expect { 700 -re "No core file specified..*$gdb_prompt $" { pass "target core" } 701 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 702 send_gdb "n\n" 703 if $verbose>1 then { 704 send_user "\t\tDidn't kill program being debugged\n" 705 } 706 gdb_expect -re "$gdb_prompt $" { } 707 pass "target core" 708 } 709 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" } 710 -re ".*$gdb_prompt $" { fail "target core" } 711 timeout { fail "(timeout) target core" } 712} 713 714#test target exec 715send_gdb "target exec\n" 716gdb_expect { 717 -re "No executable file now..*$gdb_prompt $"\ 718 { pass "target exec" } 719 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 720 send_gdb "n\n" 721 if $verbose>1 then { 722 send_user "\t\tDidn't kill program being debugged\n" 723 } 724 gdb_expect -re "$gdb_prompt $" { } 725 pass "target exec" 726 } 727 -re ".*$gdb_prompt $" { fail "target exec" } 728 timeout { fail "(timeout) target exec" } 729 } 730 731#test target remote 732if ![istarget "*-*-udi*"] then { 733 send_gdb "target remote\n" 734 gdb_expect { 735 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\ 736 { pass "target remote" } 737 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 738 send_gdb "n\n" 739 if $verbose>1 then { 740 send_user "\t\tDidn't kill program being debugged\n" 741 } 742 gdb_expect -re "$gdb_prompt $" { } 743 pass "target remote" 744 } 745 -re ".*$gdb_prompt $" { fail "target remote" } 746 timeout { fail "(timeout) target remote" } 747 } 748} 749 750#test target 751gdb_test "target" "Argument required .target name.*" "target" 752#test tbreak 753gdb_test "tbreak" "No default breakpoint address now." "tbreak" 754#test tty 755gdb_test "tty" "Argument required .filename to set it to\..*" "tty" 756#test until "u" abbreviation 757gdb_test "u" "The program is not running." "until \"u\" abbreviation" 758#test until 759gdb_test "until" "The program is not running." "until" 760#test undisplay 761# FIXME -- need to dump full output to detailed log 762send_gdb "undisplay\n" 763gdb_expect { 764 -re "Delete all auto-display expressions.*y or n. $" { 765 send_gdb "y\n" 766 gdb_expect { 767 -re "$gdb_prompt $" { pass "undisplay prompt" } 768 timeout { fail "(timeout) (timeout) undisplay prompt" } 769 } 770 } 771 timeout { fail "(timeout) (timeout) undisplay prompt" } 772} 773 774#test unset environment 775send_gdb "unset environment\n" 776gdb_expect { 777 -re "Delete all environment variables?.*y or n. $" { 778 send_gdb "y\n" 779 gdb_expect { 780 -re "$gdb_prompt $" { pass "unset environmentprompt" } 781 timeout { 782 fail "(timeout) (timeout) unset environment prompt" 783 } 784 } 785 } 786 timeout { 787 fail "(timeout) (timeout) unset environment prompt" 788 } 789} 790 791#test unset 792gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset" 793#test up 794#test up-silently 795gdb_test "up-silently" "No stack." "up-silently" 796#test watch 797gdb_test "watch" "Argument required .expression to compute.*" "watch" 798#test whatis 799gdb_test "whatis" "The history is empty." "whatis" 800#test where 801gdb_test "where" "No stack." "where" 802#test x 803#The case in which it prints a number is for vxgdb. 804send_gdb "x\n" 805gdb_expect { 806 -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" { 807 pass "x" 808 } 809 -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" { 810 pass "x" 811 } 812 -re ".*$gdb_prompt $" { fail "x" } 813 timeout { fail "(timeout) x" } 814} 815 816gdb_exit 817