1# Makefile.in generated by automake 1.12.5 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2012 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17VPATH = @srcdir@ 18am__make_dryrun = \ 19 { \ 20 am__dry=no; \ 21 case $$MAKEFLAGS in \ 22 *\\[\ \ ]*) \ 23 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ 24 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ 25 *) \ 26 for am__flg in $$MAKEFLAGS; do \ 27 case $$am__flg in \ 28 *=*|--*) ;; \ 29 *n*) am__dry=yes; break;; \ 30 esac; \ 31 done;; \ 32 esac; \ 33 test $$am__dry = yes; \ 34 } 35pkgdatadir = $(datadir)/@PACKAGE@ 36pkgincludedir = $(includedir)/@PACKAGE@ 37pkglibdir = $(libdir)/@PACKAGE@ 38pkglibexecdir = $(libexecdir)/@PACKAGE@ 39am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 40install_sh_DATA = $(install_sh) -c -m 644 41install_sh_PROGRAM = $(install_sh) -c 42install_sh_SCRIPT = $(install_sh) -c 43INSTALL_HEADER = $(INSTALL_DATA) 44transform = $(program_transform_name) 45NORMAL_INSTALL = : 46PRE_INSTALL = : 47POST_INSTALL = : 48NORMAL_UNINSTALL = : 49PRE_UNINSTALL = : 50POST_UNINSTALL = : 51build_triplet = @build@ 52host_triplet = @host@ 53target_triplet = @target@ 54subdir = config 55DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in 56ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 57am__aclocal_m4_deps = $(top_srcdir)/macros/afs-check.m4 \ 58 $(top_srcdir)/macros/ax_pthread.m4 \ 59 $(top_srcdir)/macros/cnid-backend.m4 \ 60 $(top_srcdir)/macros/config-checks.m4 \ 61 $(top_srcdir)/macros/db3-check.m4 \ 62 $(top_srcdir)/macros/grep-check.m4 \ 63 $(top_srcdir)/macros/gssapi-check.m4 \ 64 $(top_srcdir)/macros/iconv.m4 \ 65 $(top_srcdir)/macros/largefile-check.m4 \ 66 $(top_srcdir)/macros/libgcrypt.m4 \ 67 $(top_srcdir)/macros/libtool.m4 \ 68 $(top_srcdir)/macros/ltoptions.m4 \ 69 $(top_srcdir)/macros/ltsugar.m4 \ 70 $(top_srcdir)/macros/ltversion.m4 \ 71 $(top_srcdir)/macros/lt~obsolete.m4 \ 72 $(top_srcdir)/macros/netatalk.m4 \ 73 $(top_srcdir)/macros/pam-check.m4 \ 74 $(top_srcdir)/macros/perl-check.m4 \ 75 $(top_srcdir)/macros/ps-check.m4 \ 76 $(top_srcdir)/macros/quota-check.m4 \ 77 $(top_srcdir)/macros/ssl-check.m4 \ 78 $(top_srcdir)/macros/summary.m4 \ 79 $(top_srcdir)/macros/tcp-wrappers.m4 \ 80 $(top_srcdir)/macros/util.m4 $(top_srcdir)/macros/zeroconf.m4 \ 81 $(top_srcdir)/configure.ac 82am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 83 $(ACLOCAL_M4) 84mkinstalldirs = $(install_sh) -d 85CONFIG_HEADER = $(top_builddir)/config.h 86CONFIG_CLEAN_FILES = 87CONFIG_CLEAN_VPATH_FILES = 88AM_V_P = $(am__v_P_@AM_V@) 89am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 90am__v_P_0 = false 91am__v_P_1 = : 92AM_V_GEN = $(am__v_GEN_@AM_V@) 93am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 94am__v_GEN_0 = @echo " GEN " $@; 95am__v_GEN_1 = 96AM_V_at = $(am__v_at_@AM_V@) 97am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 98am__v_at_0 = @ 99am__v_at_1 = 100SOURCES = 101DIST_SOURCES = 102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 103 html-recursive info-recursive install-data-recursive \ 104 install-dvi-recursive install-exec-recursive \ 105 install-html-recursive install-info-recursive \ 106 install-pdf-recursive install-ps-recursive install-recursive \ 107 installcheck-recursive installdirs-recursive pdf-recursive \ 108 ps-recursive uninstall-recursive 109am__can_run_installinfo = \ 110 case $$AM_UPDATE_INFO_DIR in \ 111 n|no|NO) false;; \ 112 *) (install-info --version) >/dev/null 2>&1;; \ 113 esac 114am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 115am__vpath_adj = case $$p in \ 116 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 117 *) f=$$p;; \ 118 esac; 119am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 120am__install_max = 40 121am__nobase_strip_setup = \ 122 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 123am__nobase_strip = \ 124 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 125am__nobase_list = $(am__nobase_strip_setup); \ 126 for p in $$list; do echo "$$p $$p"; done | \ 127 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 128 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 129 if (++n[$$2] == $(am__install_max)) \ 130 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 131 END { for (dir in files) print dir, files[dir] }' 132am__base_list = \ 133 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 134 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 135am__uninstall_files_from_dir = { \ 136 test -z "$$files" \ 137 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 138 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 139 $(am__cd) "$$dir" && rm -f $$files; }; \ 140 } 141am__installdirs = "$(DESTDIR)$(dbusservicedir)" 142DATA = $(dbusservice_DATA) 143RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 144 distclean-recursive maintainer-clean-recursive 145AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 146 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 147 distdir 148ETAGS = etags 149CTAGS = ctags 150DIST_SUBDIRS = $(SUBDIRS) 151DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 152am__relativize = \ 153 dir0=`pwd`; \ 154 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 155 sed_rest='s,^[^/]*/*,,'; \ 156 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 157 sed_butlast='s,/*[^/]*$$,,'; \ 158 while test -n "$$dir1"; do \ 159 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 160 if test "$$first" != "."; then \ 161 if test "$$first" = ".."; then \ 162 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 163 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 164 else \ 165 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 166 if test "$$first2" = "$$first"; then \ 167 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 168 else \ 169 dir2="../$$dir2"; \ 170 fi; \ 171 dir0="$$dir0"/"$$first"; \ 172 fi; \ 173 fi; \ 174 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 175 done; \ 176 reldir="$$dir2" 177ACLOCAL = @ACLOCAL@ 178ACL_LIBS = @ACL_LIBS@ 179AFS_CFLAGS = @AFS_CFLAGS@ 180AFS_LIBS = @AFS_LIBS@ 181AMTAR = @AMTAR@ 182AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 183AR = @AR@ 184AUTOCONF = @AUTOCONF@ 185AUTOHEADER = @AUTOHEADER@ 186AUTOMAKE = @AUTOMAKE@ 187AVAHI_CFLAGS = @AVAHI_CFLAGS@ 188AVAHI_LIBS = @AVAHI_LIBS@ 189AVAHI_TPOLL_CFLAGS = @AVAHI_TPOLL_CFLAGS@ 190AVAHI_TPOLL_LIBS = @AVAHI_TPOLL_LIBS@ 191AWK = @AWK@ 192BDB_BIN = @BDB_BIN@ 193BDB_CFLAGS = @BDB_CFLAGS@ 194BDB_LIBS = @BDB_LIBS@ 195BDB_PATH = @BDB_PATH@ 196CC = @CC@ 197CCDEPMODE = @CCDEPMODE@ 198CFLAGS = @CFLAGS@ 199CPP = @CPP@ 200CPPFLAGS = @CPPFLAGS@ 201CRYPT_LIBS = @CRYPT_LIBS@ 202CYGPATH_W = @CYGPATH_W@ 203DBUS_CFLAGS = @DBUS_CFLAGS@ 204DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ 205DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@ 206DBUS_GTHREAD_CFLAGS = @DBUS_GTHREAD_CFLAGS@ 207DBUS_GTHREAD_LIBS = @DBUS_GTHREAD_LIBS@ 208DBUS_LIBS = @DBUS_LIBS@ 209DBUS_SYS_DIR = @DBUS_SYS_DIR@ 210DEFAULT_CNID_SCHEME = @DEFAULT_CNID_SCHEME@ 211DEFS = @DEFS@ 212DEPDIR = @DEPDIR@ 213DLLTOOL = @DLLTOOL@ 214DOCBOOK_ROOT = @DOCBOOK_ROOT@ 215DSYMUTIL = @DSYMUTIL@ 216DTRACE_LIBS = @DTRACE_LIBS@ 217DUMPBIN = @DUMPBIN@ 218ECHO_C = @ECHO_C@ 219ECHO_N = @ECHO_N@ 220ECHO_T = @ECHO_T@ 221EGREP = @EGREP@ 222EXEEXT = @EXEEXT@ 223FGREP = @FGREP@ 224GREP = @GREP@ 225GSSAPI_CFLAGS = @GSSAPI_CFLAGS@ 226GSSAPI_LDFLAGS = @GSSAPI_LDFLAGS@ 227GSSAPI_LIBS = @GSSAPI_LIBS@ 228ICONV_CFLAGS = @ICONV_CFLAGS@ 229ICONV_LIBS = @ICONV_LIBS@ 230INIT_DIR = @INIT_DIR@ 231INSTALL = @INSTALL@ 232INSTALL_DATA = @INSTALL_DATA@ 233INSTALL_PROGRAM = @INSTALL_PROGRAM@ 234INSTALL_SCRIPT = @INSTALL_SCRIPT@ 235INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 236KRB5_CFLAGS = @KRB5_CFLAGS@ 237KRB5_CONFIG = @KRB5_CONFIG@ 238KRB5_LIBS = @KRB5_LIBS@ 239LD = @LD@ 240LDAP_CFLAGS = @LDAP_CFLAGS@ 241LDAP_LDFLAGS = @LDAP_LDFLAGS@ 242LDAP_LIBS = @LDAP_LIBS@ 243LDFLAGS = @LDFLAGS@ 244LIBADD_DL = @LIBADD_DL@ 245LIBADD_DLD_LINK = @LIBADD_DLD_LINK@ 246LIBADD_DLOPEN = @LIBADD_DLOPEN@ 247LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@ 248LIBEVENT_CFLAGS = @LIBEVENT_CFLAGS@ 249LIBEVENT_LDFLAGS = @LIBEVENT_LDFLAGS@ 250LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ 251LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ 252LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ 253LIBOBJS = @LIBOBJS@ 254LIBS = @LIBS@ 255LIBTOOL = @LIBTOOL@ 256LIPO = @LIPO@ 257LN_S = @LN_S@ 258LTLIBOBJS = @LTLIBOBJS@ 259LT_DLLOADERS = @LT_DLLOADERS@ 260LT_DLPREOPEN = @LT_DLPREOPEN@ 261MAINT = @MAINT@ 262MAKEINFO = @MAKEINFO@ 263MANIFEST_TOOL = @MANIFEST_TOOL@ 264MKDIR_P = @MKDIR_P@ 265NETATALK_VERSION = @NETATALK_VERSION@ 266NETA_LDCONFIG = @NETA_LDCONFIG@ 267NM = @NM@ 268NMEDIT = @NMEDIT@ 269OBJDUMP = @OBJDUMP@ 270OBJEXT = @OBJEXT@ 271OTOOL = @OTOOL@ 272OTOOL64 = @OTOOL64@ 273OVERWRITE_CONFIG = @OVERWRITE_CONFIG@ 274PACKAGE = @PACKAGE@ 275PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 276PACKAGE_NAME = @PACKAGE_NAME@ 277PACKAGE_STRING = @PACKAGE_STRING@ 278PACKAGE_TARNAME = @PACKAGE_TARNAME@ 279PACKAGE_URL = @PACKAGE_URL@ 280PACKAGE_VERSION = @PACKAGE_VERSION@ 281PAMDIR = @PAMDIR@ 282PAM_ACCOUNT = @PAM_ACCOUNT@ 283PAM_AUTH = @PAM_AUTH@ 284PAM_CFLAGS = @PAM_CFLAGS@ 285PAM_DIRECTIVE = @PAM_DIRECTIVE@ 286PAM_LIBS = @PAM_LIBS@ 287PAM_PASSWORD = @PAM_PASSWORD@ 288PAM_SESSION = @PAM_SESSION@ 289PATH_NETATALK_LOCK = @PATH_NETATALK_LOCK@ 290PATH_SEPARATOR = @PATH_SEPARATOR@ 291PERL = @PERL@ 292PKGCONFDIR = @PKGCONFDIR@ 293PKG_CONFIG = @PKG_CONFIG@ 294PS = @PS@ 295PTHREAD_CC = @PTHREAD_CC@ 296PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ 297PTHREAD_LIBS = @PTHREAD_LIBS@ 298QUOTA_LIBS = @QUOTA_LIBS@ 299RANLIB = @RANLIB@ 300SED = @SED@ 301SERVERTEXT = @SERVERTEXT@ 302SET_MAKE = @SET_MAKE@ 303SHELL = @SHELL@ 304SSL_CFLAGS = @SSL_CFLAGS@ 305SSL_LIBS = @SSL_LIBS@ 306STRIP = @STRIP@ 307UAMS_PATH = @UAMS_PATH@ 308VERSION = @VERSION@ 309WRAP_LIBS = @WRAP_LIBS@ 310XSLTPROC = @XSLTPROC@ 311XSLTPROC_FLAGS = @XSLTPROC_FLAGS@ 312ZEROCONF_CFLAGS = @ZEROCONF_CFLAGS@ 313ZEROCONF_LIBS = @ZEROCONF_LIBS@ 314abs_builddir = @abs_builddir@ 315abs_srcdir = @abs_srcdir@ 316abs_top_builddir = @abs_top_builddir@ 317abs_top_srcdir = @abs_top_srcdir@ 318ac_ct_AR = @ac_ct_AR@ 319ac_ct_CC = @ac_ct_CC@ 320ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 321am__include = @am__include@ 322am__leading_dot = @am__leading_dot@ 323am__quote = @am__quote@ 324am__tar = @am__tar@ 325am__untar = @am__untar@ 326atalk_cv_have_dtrace = @atalk_cv_have_dtrace@ 327ax_pthread_config = @ax_pthread_config@ 328bindir = @bindir@ 329build = @build@ 330build_alias = @build_alias@ 331build_cpu = @build_cpu@ 332build_os = @build_os@ 333build_vendor = @build_vendor@ 334builddir = @builddir@ 335compiled_backends = @compiled_backends@ 336datadir = @datadir@ 337datarootdir = @datarootdir@ 338docdir = @docdir@ 339dvidir = @dvidir@ 340exec_prefix = @exec_prefix@ 341host = @host@ 342host_alias = @host_alias@ 343host_cpu = @host_cpu@ 344host_os = @host_os@ 345host_vendor = @host_vendor@ 346htmldir = @htmldir@ 347includedir = @includedir@ 348infodir = @infodir@ 349install_sh = @install_sh@ 350libdir = @libdir@ 351libexecdir = @libexecdir@ 352localedir = @localedir@ 353localstatedir = @localstatedir@ 354mandir = @mandir@ 355mkdir_p = @mkdir_p@ 356oldincludedir = @oldincludedir@ 357pdfdir = @pdfdir@ 358prefix = @prefix@ 359program_transform_name = @program_transform_name@ 360psdir = @psdir@ 361sbindir = @sbindir@ 362sharedstatedir = @sharedstatedir@ 363srcdir = @srcdir@ 364subdirs = @subdirs@ 365sys_symbol_underscore = @sys_symbol_underscore@ 366sysconfdir = @sysconfdir@ 367target = @target@ 368target_alias = @target_alias@ 369target_cpu = @target_cpu@ 370target_os = @target_os@ 371target_vendor = @target_vendor@ 372top_build_prefix = @top_build_prefix@ 373top_builddir = @top_builddir@ 374top_srcdir = @top_srcdir@ 375SUBDIRS = pam 376SUFFIXES = .tmpl . 377TMPLFILES = afp.conf.tmpl 378GENFILES = afp.conf 379CLEANFILES = $(GENFILES) 380EXTRA_DIST = afp.conf.tmpl extmap.conf netatalk-dbus.conf 381CONFFILES = extmap.conf 382pkgconfdir = @PKGCONFDIR@ 383@HAVE_DBUS_GLIB_TRUE@dbusservicedir = $(DBUS_SYS_DIR) 384@HAVE_DBUS_GLIB_TRUE@dbusservice_DATA = netatalk-dbus.conf 385all: all-recursive 386 387.SUFFIXES: 388.SUFFIXES: .tmpl . 389$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 390 @for dep in $?; do \ 391 case '$(am__configure_deps)' in \ 392 *$$dep*) \ 393 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 394 && { if test -f $@; then exit 0; else break; fi; }; \ 395 exit 1;; \ 396 esac; \ 397 done; \ 398 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config/Makefile'; \ 399 $(am__cd) $(top_srcdir) && \ 400 $(AUTOMAKE) --foreign config/Makefile 401.PRECIOUS: Makefile 402Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 403 @case '$?' in \ 404 *config.status*) \ 405 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 406 *) \ 407 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 408 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 409 esac; 410 411$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 412 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 413 414$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 415 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 416$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 417 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 418$(am__aclocal_m4_deps): 419 420mostlyclean-libtool: 421 -rm -f *.lo 422 423clean-libtool: 424 -rm -rf .libs _libs 425install-dbusserviceDATA: $(dbusservice_DATA) 426 @$(NORMAL_INSTALL) 427 @list='$(dbusservice_DATA)'; test -n "$(dbusservicedir)" || list=; \ 428 if test -n "$$list"; then \ 429 echo " $(MKDIR_P) '$(DESTDIR)$(dbusservicedir)'"; \ 430 $(MKDIR_P) "$(DESTDIR)$(dbusservicedir)" || exit 1; \ 431 fi; \ 432 for p in $$list; do \ 433 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 434 echo "$$d$$p"; \ 435 done | $(am__base_list) | \ 436 while read files; do \ 437 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbusservicedir)'"; \ 438 $(INSTALL_DATA) $$files "$(DESTDIR)$(dbusservicedir)" || exit $$?; \ 439 done 440 441uninstall-dbusserviceDATA: 442 @$(NORMAL_UNINSTALL) 443 @list='$(dbusservice_DATA)'; test -n "$(dbusservicedir)" || list=; \ 444 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 445 dir='$(DESTDIR)$(dbusservicedir)'; $(am__uninstall_files_from_dir) 446 447# This directory's subdirectories are mostly independent; you can cd 448# into them and run 'make' without going through this Makefile. 449# To change the values of 'make' variables: instead of editing Makefiles, 450# (1) if the variable is set in 'config.status', edit 'config.status' 451# (which will cause the Makefiles to be regenerated when you run 'make'); 452# (2) otherwise, pass the desired values on the 'make' command line. 453$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): 454 @fail= failcom='exit 1'; \ 455 for f in x $$MAKEFLAGS; do \ 456 case $$f in \ 457 *=* | --[!k]*);; \ 458 *k*) failcom='fail=yes';; \ 459 esac; \ 460 done; \ 461 dot_seen=no; \ 462 target=`echo $@ | sed s/-recursive//`; \ 463 case "$@" in \ 464 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 465 *) list='$(SUBDIRS)' ;; \ 466 esac; \ 467 for subdir in $$list; do \ 468 echo "Making $$target in $$subdir"; \ 469 if test "$$subdir" = "."; then \ 470 dot_seen=yes; \ 471 local_target="$$target-am"; \ 472 else \ 473 local_target="$$target"; \ 474 fi; \ 475 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 476 || eval $$failcom; \ 477 done; \ 478 if test "$$dot_seen" = "no"; then \ 479 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 480 fi; test -z "$$fail" 481tags-recursive: 482 list='$(SUBDIRS)'; for subdir in $$list; do \ 483 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 484 done 485ctags-recursive: 486 list='$(SUBDIRS)'; for subdir in $$list; do \ 487 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 488 done 489cscopelist-recursive: 490 list='$(SUBDIRS)'; for subdir in $$list; do \ 491 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ 492 done 493 494ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 495 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 496 unique=`for i in $$list; do \ 497 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 498 done | \ 499 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 500 END { if (nonempty) { for (i in files) print i; }; }'`; \ 501 mkid -fID $$unique 502tags: TAGS 503 504TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 505 $(TAGS_FILES) $(LISP) 506 set x; \ 507 here=`pwd`; \ 508 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 509 include_option=--etags-include; \ 510 empty_fix=.; \ 511 else \ 512 include_option=--include; \ 513 empty_fix=; \ 514 fi; \ 515 list='$(SUBDIRS)'; for subdir in $$list; do \ 516 if test "$$subdir" = .; then :; else \ 517 test ! -f $$subdir/TAGS || \ 518 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 519 fi; \ 520 done; \ 521 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 522 unique=`for i in $$list; do \ 523 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 524 done | \ 525 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 526 END { if (nonempty) { for (i in files) print i; }; }'`; \ 527 shift; \ 528 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 529 test -n "$$unique" || unique=$$empty_fix; \ 530 if test $$# -gt 0; then \ 531 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 532 "$$@" $$unique; \ 533 else \ 534 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 535 $$unique; \ 536 fi; \ 537 fi 538ctags: CTAGS 539CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 540 $(TAGS_FILES) $(LISP) 541 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 542 unique=`for i in $$list; do \ 543 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 544 done | \ 545 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 546 END { if (nonempty) { for (i in files) print i; }; }'`; \ 547 test -z "$(CTAGS_ARGS)$$unique" \ 548 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 549 $$unique 550 551GTAGS: 552 here=`$(am__cd) $(top_builddir) && pwd` \ 553 && $(am__cd) $(top_srcdir) \ 554 && gtags -i $(GTAGS_ARGS) "$$here" 555 556cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) 557 list='$(SOURCES) $(HEADERS) $(LISP)'; \ 558 case "$(srcdir)" in \ 559 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 560 *) sdir=$(subdir)/$(srcdir) ;; \ 561 esac; \ 562 for i in $$list; do \ 563 if test -f "$$i"; then \ 564 echo "$(subdir)/$$i"; \ 565 else \ 566 echo "$$sdir/$$i"; \ 567 fi; \ 568 done >> $(top_builddir)/cscope.files 569 570distclean-tags: 571 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 572 573distdir: $(DISTFILES) 574 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 575 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 576 list='$(DISTFILES)'; \ 577 dist_files=`for file in $$list; do echo $$file; done | \ 578 sed -e "s|^$$srcdirstrip/||;t" \ 579 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 580 case $$dist_files in \ 581 */*) $(MKDIR_P) `echo "$$dist_files" | \ 582 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 583 sort -u` ;; \ 584 esac; \ 585 for file in $$dist_files; do \ 586 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 587 if test -d $$d/$$file; then \ 588 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 589 if test -d "$(distdir)/$$file"; then \ 590 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 591 fi; \ 592 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 593 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 594 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 595 fi; \ 596 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 597 else \ 598 test -f "$(distdir)/$$file" \ 599 || cp -p $$d/$$file "$(distdir)/$$file" \ 600 || exit 1; \ 601 fi; \ 602 done 603 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 604 if test "$$subdir" = .; then :; else \ 605 $(am__make_dryrun) \ 606 || test -d "$(distdir)/$$subdir" \ 607 || $(MKDIR_P) "$(distdir)/$$subdir" \ 608 || exit 1; \ 609 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 610 $(am__relativize); \ 611 new_distdir=$$reldir; \ 612 dir1=$$subdir; dir2="$(top_distdir)"; \ 613 $(am__relativize); \ 614 new_top_distdir=$$reldir; \ 615 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 616 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 617 ($(am__cd) $$subdir && \ 618 $(MAKE) $(AM_MAKEFLAGS) \ 619 top_distdir="$$new_top_distdir" \ 620 distdir="$$new_distdir" \ 621 am__remove_distdir=: \ 622 am__skip_length_check=: \ 623 am__skip_mode_fix=: \ 624 distdir) \ 625 || exit 1; \ 626 fi; \ 627 done 628check-am: all-am 629check: check-recursive 630all-am: Makefile $(DATA) 631installdirs: installdirs-recursive 632installdirs-am: 633 for dir in "$(DESTDIR)$(dbusservicedir)"; do \ 634 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 635 done 636install: install-recursive 637install-exec: install-exec-recursive 638install-data: install-data-recursive 639uninstall: uninstall-recursive 640 641install-am: all-am 642 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 643 644installcheck: installcheck-recursive 645install-strip: 646 if test -z '$(STRIP)'; then \ 647 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 648 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 649 install; \ 650 else \ 651 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 652 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 653 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 654 fi 655mostlyclean-generic: 656 657clean-generic: 658 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) 659 660distclean-generic: 661 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 662 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 663 664maintainer-clean-generic: 665 @echo "This command is intended for maintainers to use" 666 @echo "it deletes files that may require special tools to rebuild." 667clean: clean-recursive 668 669clean-am: clean-generic clean-libtool mostlyclean-am 670 671distclean: distclean-recursive 672 -rm -f Makefile 673distclean-am: clean-am distclean-generic distclean-tags 674 675dvi: dvi-recursive 676 677dvi-am: 678 679html: html-recursive 680 681html-am: 682 683info: info-recursive 684 685info-am: 686 687install-data-am: install-data-local install-dbusserviceDATA 688 689install-dvi: install-dvi-recursive 690 691install-dvi-am: 692 693install-exec-am: 694 695install-html: install-html-recursive 696 697install-html-am: 698 699install-info: install-info-recursive 700 701install-info-am: 702 703install-man: 704 705install-pdf: install-pdf-recursive 706 707install-pdf-am: 708 709install-ps: install-ps-recursive 710 711install-ps-am: 712 713installcheck-am: 714 715maintainer-clean: maintainer-clean-recursive 716 -rm -f Makefile 717maintainer-clean-am: distclean-am maintainer-clean-generic 718 719mostlyclean: mostlyclean-recursive 720 721mostlyclean-am: mostlyclean-generic mostlyclean-libtool 722 723pdf: pdf-recursive 724 725pdf-am: 726 727ps: ps-recursive 728 729ps-am: 730 731uninstall-am: uninstall-dbusserviceDATA uninstall-local 732 733.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ 734 cscopelist-recursive ctags-recursive install-am install-strip \ 735 tags-recursive 736 737.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 738 all all-am check check-am clean clean-generic clean-libtool \ 739 cscopelist cscopelist-recursive ctags ctags-recursive \ 740 distclean distclean-generic distclean-libtool distclean-tags \ 741 distdir dvi dvi-am html html-am info info-am install \ 742 install-am install-data install-data-am install-data-local \ 743 install-dbusserviceDATA install-dvi install-dvi-am \ 744 install-exec install-exec-am install-html install-html-am \ 745 install-info install-info-am install-man install-pdf \ 746 install-pdf-am install-ps install-ps-am install-strip \ 747 installcheck installcheck-am installdirs installdirs-am \ 748 maintainer-clean maintainer-clean-generic mostlyclean \ 749 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 750 tags tags-recursive uninstall uninstall-am \ 751 uninstall-dbusserviceDATA uninstall-local 752 753 754# 755# rule to parse template files 756# 757 758.tmpl: 759 sed -e s@:UAMS_PATH:@${UAMS_PATH}@ \ 760 -e s@:ETCDIR:@${pkgconfdir}@ \ 761 -e s@:COMPILED_BACKENDS:@"$(compiled_backends)"@ \ 762 -e s@:DEFAULT_CNID_SCHEME:@$(DEFAULT_CNID_SCHEME)@ \ 763 <$< >$@ 764 765# 766# install configuration files 767# 768 769install-data-local: install-config-files 770 mkdir -pm 0755 $(DESTDIR)$(localstatedir)/netatalk/ 771 mkdir -pm 0755 $(DESTDIR)$(localstatedir)/netatalk/CNID/ 772 $(INSTALL_DATA) $(srcdir)/README $(DESTDIR)$(localstatedir)/netatalk/ 773 $(INSTALL_DATA) $(srcdir)/README $(DESTDIR)$(localstatedir)/netatalk/CNID/ 774 775uninstall-local: 776 for f in $(CONFFILES) $(GENFILES); do \ 777 echo rm -f $(DESTDIR)$(pkgconfdir)/$$f; \ 778 rm -f $(DESTDIR)$(pkgconfdir)/$$f; \ 779 done 780 rm -f $(DESTDIR)$(localstatedir)/netatalk/README 781 rm -f $(DESTDIR)$(localstatedir)/netatalk/CNID/README 782@USE_DEBIAN_TRUE@ rm -f $(DESTDIR)/etc/default/netatalk 783 784install-config-files: $(CONFFILES) $(GENFILES) 785 $(mkinstalldirs) $(DESTDIR)$(pkgconfdir) 786 for f in $(CONFFILES) ; do \ 787 if test "x$(OVERWRITE_CONFIG)" = "xyes" -o ! -f $(DESTDIR)$(pkgconfdir)/$$f; then \ 788 echo "$(INSTALL_DATA) $$f $(DESTDIR)$(pkgconfdir)"; \ 789 $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(pkgconfdir); \ 790 else \ 791 echo "not overwriting $$f"; \ 792 fi; \ 793 done 794 for f in $(GENFILES); do \ 795 if test "x$(OVERWRITE_CONFIG)" = "xyes" -o ! -f $(DESTDIR)$(pkgconfdir)/$$f; then \ 796 echo "$(INSTALL_DATA) $$f $(DESTDIR)$(pkgconfdir)"; \ 797 $(INSTALL_DATA) $$f $(DESTDIR)$(pkgconfdir); \ 798 else \ 799 echo "not overwriting $$f"; \ 800 fi; \ 801 done 802 803# Tell versions [3.59,3.63) of GNU make to not export all variables. 804# Otherwise a system limit (for SysV at least) may be exceeded. 805.NOEXPORT: 806