1# Copyright 1998, 1999, 2000, 2001, 2004, 2007 2# Free Software Foundation, Inc. 3 4# This program is free software; you can redistribute it and/or modify 5# it under the terms of the GNU General Public License as published by 6# the Free Software Foundation; either version 3 of the License, or 7# (at your option) any later version. 8# 9# This program is distributed in the hope that it will be useful, 10# but WITHOUT ANY WARRANTY; without even the implied warranty of 11# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12# GNU General Public License for more details. 13# 14# You should have received a copy of the GNU General Public License 15# along with this program. If not, see <http://www.gnu.org/licenses/>. 16 17# Please email any bugs, comments, and/or additions to this file to: 18# bug-gdb@prep.ai.mit.edu 19 20# This file was written by Elena Zannoni (ezannoni@cygnus.com) 21 22 23if $tracelevel then { 24 strace $tracelevel 25} 26 27set prms_id 0 28set bug_id 0 29 30set testfile "call-ar-st" 31set srcfile ${testfile}.c 32set binfile ${objdir}/${subdir}/${testfile} 33 34# Test depends on printf, which the sparclet stub doesn't support. 35if { [istarget "sparclet-*-*"] } { 36 return 0; 37} 38 39if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { 40 untested "couldn't compile ${srcdir}/${subdir}/${srcfile}" 41 return -1 42} 43 44 45# Create and source the file that provides information about the compiler 46# used to compile the test case. 47 48if [get_compiler_info ${binfile}] { 49 return -1; 50} 51 52# Some targets can't call functions, so don't even bother with this 53# test. 54if [target_info exists gdb,cannot_call_functions] { 55 setup_xfail "*-*-*" 2416 56 fail "This target can not call functions" 57 continue 58} 59 60set oldtimeout $timeout 61set timeout [expr "$timeout + 60"] 62 63# Set the current language to C. This counts as a test. If it 64# fails, then we skip the other tests. 65 66proc set_lang_c {} { 67 global gdb_prompt 68 69 send_gdb "set language c\n" 70 gdb_expect { 71 -re ".*$gdb_prompt $" {} 72 timeout { fail "set language c (timeout)" ; return 0; } 73 } 74 75 send_gdb "show language\n" 76 gdb_expect { 77 -re ".* source language is \"c\".*$gdb_prompt $" { 78 pass "set language to \"c\"" 79 return 1 80 } 81 -re ".*$gdb_prompt $" { 82 fail "setting language to \"c\"" 83 return 0 84 } 85 timeout { 86 fail "can't show language (timeout)" 87 return 0 88 } 89 } 90} 91 92# Start with a fresh gdb. 93 94gdb_exit 95gdb_start 96gdb_reinitialize_dir $srcdir/$subdir 97gdb_load ${binfile} 98send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $" 99send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $" 100send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $" 101 102 103if ![runto_main] then { 104 perror "couldn't run to breakpoint" 105 continue 106} 107 108get_debug_format 109 110#go -until 1209 111gdb_test "tbreak 1209" \ 112 "Breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \ 113 "tbreakpoint line 1209" 114 115gdb_test continue \ 116"Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \ 117"run until breakpoint set at a line" 118 119 120#call print_double_array(double_array) 121if {![gdb_skip_float_test "print print_double_array(double_array)"] && \ 122 ![gdb_skip_stdio_test "print print_double_array(double_array)"] } { 123 send_gdb "print print_double_array(double_array)\n" 124 gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" { 125 "\[ \t\r\n\]+array_d :" 126 "\[ \t\r\n\]+=========" 127 "\[ \t\r\n\]+0.000000" 128 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]" 129 "\[ \t\r\n\]+" 130 } 131} 132 133#call print_char_array(char_array) 134 135if ![gdb_skip_stdio_test "print_char_array(char_array)"] { 136 send_gdb "print print_char_array(char_array)\n" 137 gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" { 138 "\[ \t\r\n\]+array_c :" 139 "\[ \t\r\n\]+=========" 140 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 141 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 142 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 143 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+" 144 } 145} 146 147 148 149 150#go -until 1216 151gdb_test "tbreak 1216" \ 152"Breakpoint.*file.*$srcfile, line 1216.*" \ 153"tbreakpoint line 1216" 154 155if ![gdb_skip_stdio_test "continue to 1216"] { 156 send_gdb "continue\n" 157 gdb_expect_list "continue to 1216" ".*$gdb_prompt $" { 158 "\[ \t\r\n\]+array_c :" 159 "\[ \t\r\n\]+=========" 160 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 161 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 162 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 163 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa" 164 "\[ \t\r\n\]+main.*at.*:1216" 165 "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)" 166 } 167} else { 168 gdb_test "continue" "" "" 169} 170 171# I am disabling this test, because it takes too long. I verified by 172# hand that it works, feel free to check for yourself. 173#call print_all_arrays(integer_array, char_array, float_array, double_array) 174#send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n" 175#gdb_expect { 176# -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" { 177# pass "print print_all_arrays(integer_array, char_array, float_array, double_array)" 178# } 179# -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" } 180# timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" } 181# } 182 183#set timeout $oldtimeout 184#go -until 1220 185gdb_test "tbreak 1220" \ 186 "Breakpoint.* file .*$srcfile, line 1220.*" \ 187 "tbreakpoint line 1220" 188 189if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \ 190 ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } { 191 send_gdb "continue\n" 192 gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" { 193 "Continuing\\." 194 "\[ \t\r\n\]+array_d :" 195 "\[ \t\r\n\]+=========" 196 "\[ \t\r\n\]+0.000000" 197 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 198 "\[ \t\r\n\]+" 199 ".*array_f :" 200 ".*student id :\[\t \]+.*YELLOW" 201 ".*array_i :" 202 ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." 203 } 204} else { 205 gdb_test "continue" "" "" 206} 207 208#step 209send_gdb "step\n" 210gdb_expect { 211 -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"} 212 -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" } 213 timeout { fail "step inside print_all_arrays (timeout)" } 214} 215 216 217#step -over 218if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] { 219 send_gdb "next\n" 220 gdb_expect { 221 -re "array_i :.*307.*print_char_array.*$gdb_prompt $" { 222 pass "next over print_int_array in print-all_arrays" 223 } 224 -re ".*$gdb_prompt $" { 225 fail "next over print_int_array in print-all_arrays" 226 } 227 timeout { 228 fail "next over print_int_array in print-all_arrays (timeout)" 229 } 230 } 231} else { 232 gdb_test "next" "" "" 233} 234 235#call print_double_array(array_d) 236if {![gdb_skip_float_test "print print_double_array(array_d)"] && \ 237 ![gdb_skip_stdio_test "print print_double_array(array_d)"] } { 238 send_gdb "print print_double_array(array_d)\n" 239 gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" { 240 "array_d :" 241 "\[ \t\r\n\]+=========" 242 "\[ \t\r\n\]+\[ \t\r\n\]+0.000000" 243 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 244 "\[ \t\r\n\]+" 245 } 246} 247 248#go -until 1236 249gdb_test "tbreak 1236" \ 250"Breakpoint.* file .*$srcfile, line 1236.*" \ 251"tbreakpoint line 1236" 252 253if {![gdb_skip_float_test "continuing to 1236"] && \ 254 ![gdb_skip_stdio_test "continuing to 1236"] } { 255 send_gdb "continue\n" 256 gdb_expect_list "continuing to 1236" ".*$gdb_prompt $" { 257 "Continuing\\..*array_c" 258 ".*array_f" 259 "\[ \t\r\n\]+array_d :" 260 "\[ \t\r\n\]+=========" 261 "\[ \t\r\n\]+0.000000" 262 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 263 "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)." 264 } 265} else { 266 gdb_test "continue" "" "" 267} 268 269 270#call sum_array_print(10, *list1, *list2, *list3, *list4) 271 272if ![gdb_skip_stdio_test "print sum_array_print(...)"] { 273 send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n" 274 gdb_expect { 275 -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" { 276 pass "print sum_array_print(10, *list1, *list2, *list3, *list4)" 277 } 278 -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" } 279 timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" } 280 } 281} 282 283#step over 284if ![gdb_skip_stdio_test "next to 1237"] { 285 send_gdb "next\n" 286 gdb_expect { 287 -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"} 288 -re ".*$gdb_prompt $" { fail "next to 1237" } 289 timeout { fail "next to 1237(timeout)" } 290 } 291} else { 292 gdb_test "next" "" "" 293} 294 295#call print_array_rep(\*list1, \*list2, \*list3) 296 297if ![gdb_skip_stdio_test "print print_array_rep(...)"] { 298 send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n" 299 gdb_expect { 300 -re ".*$gdb_prompt $" { 301 pass "print print_array_rep(*list1, *list2, *list3)" 302 } 303 -re ".*$gdb_prompt $" { 304 fail "print print_array_rep(*list1, *list2, *list3)" 305 } 306 timeout { 307 fail "(timeout) print print_array_rep(*list1, *list2, *list3)" 308 } 309 } 310} 311 312#go -until 1241 313gdb_test "tbreak 1241" \ 314 "Breakpoint..* file .*$srcfile, line 1241.*" \ 315 "tbreakpoint line 1241" 316 317send_gdb "continue\n" 318gdb_expect { 319 -re ".*main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" { 320 pass "continue to 1241"} 321 -re ".*$gdb_prompt $" { fail "continue to 1241"} 322 timeout { fail "(timeout) continue to 1241"} 323} 324 325 326 327# Run into sum_array_print, and verify that the arguments were passed 328# accurately. 329# 330# Note that we shouldn't use a `step' here to get into 331# sum_array_print; GCC may emit calls to memcpy to put the arguments 332# in the right place, and a step may end up in memcpy instead. This 333# may itself be a bug, but it's not the one we're trying to catch 334# here. I've added something to step-test.exp for this. 335gdb_test "break sum_array_print" \ 336 ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \ 337 "set breakpoint in sum_array_print" 338gdb_test "continue" \ 339 ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ 340 "check args of sum_array_print" 341 342#call print_array_rep(linked_list1, linked_list2, linked_list3) 343# this calls works from gdb without gdb_expect. But it does seem to hang 344#from within gdb_expect. 345#I comment this out 346#send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n" 347#gdb_expect { 348# -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" { 349# pass "print print_array_rep(linked_list1, linked_list2, linked_list3)" 350# } 351# -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" } 352# timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" } 353#} 354 355 356#go -until 1281 357gdb_test "tbreak 1281" \ 358 "Breakpoint.* file .*call-ar-st.c, line 1281.*" \ 359 "tbreakpoint line 1281" 360 361if ![gdb_skip_stdio_test "continuing to 1281"] { 362 send_gdb "continue\n" 363 gdb_expect { 364 -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" { 365 pass "continue to 1281" 366 } 367 -re ".*$gdb_prompt $" { fail "continue to 1281"} 368 timeout { fail "(timeout) continue to 1281"} 369 } 370} else { 371 gdb_test "continue" "" "" 372} 373 374#call print_small_structs(*struct1, *struct2, *struct3, *struct4, 375# *flags, *flags_combo, *three_char, *five_char, 376# *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 377 378if {![gdb_skip_float_test "print print_small_structs(...)"] && \ 379 ![gdb_skip_stdio_test "print print_small_structs(...)"] } { 380 send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n" 381 gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" { 382 "\[\t\r\n \]+alpha" 383 "\[\t\r\n \]+gamma" 384 "\[\t\r\n \]+epsilon" 385 "\[\t\r\n \]+alpha" 386 "\[\t\r\n \]+gamma" 387 "\[\t\r\n \]+epsilon" 388 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 389 "\[\t\r\n \]+Contents of three_char_t:" 390 "\[\t\r\n \]+a[ \t]*b[ \t]*c" 391 "\[\t\r\n \]+Contents of five_char_t:" 392 "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p" 393 "\[\t\r\n \]+Contents of int_char_combo_t:" 394 "\[\t\r\n \]+123[ \t]*z" 395 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 396 "\[\t\r\n \]+52" 397 "\[\t\r\n \]+Contents of struct1:" 398 "\[\t\r\n \]+6[ \t]*0" 399 "\[\t\r\n \]+Contents of struct2:" 400 "\[\t\r\n \]+10[ \t]*0" 401 "\[\t\r\n \]+Contents of struct3:" 402 "\[\t\r\n \]+12[ \t]*0" 403 "\[\t\r\n \]+Contents of one_double_t:" 404 "\[\t\r\n \]+10.500000" 405 "\[\t\r\n \]+Contents of one_double_t:" 406 "\[\t\r\n \]+-3.375000" 407 "\[\t\r\n \]+Contents of one_double_t:" 408 "\[\t\r\n \]+675.093750" 409 "\[\t\r\n \]+Contents of two_floats_t:" 410 "\[\t\r\n \]+45.234001[ \t]*43.599998" 411 "\[\t\r\n \]+Contents of two_floats_t:" 412 "\[\t\r\n \]+78.010002[ \t]*122.099998" 413 "\[\t\r\n \]+Contents of two_floats_t:" 414 "\[\t\r\n \]+-1232.344971[ \t]*-199.210007" 415 } 416} 417 418#call compute_with_small_structs(20) 419send_gdb "print compute_with_small_structs(20)\n" 420gdb_expect { 421 -re ".*\[0-9\]+ =.*$gdb_prompt $" { 422 pass "print compute_with_small_structs(20)" 423 } 424 -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" } 425 timeout { fail "(timeout) compute_with_small_structs(20)" } 426 } 427 428 429#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 430# 3.14, -5678.12345, -0.11111111, 216.97065) 431 432if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \ 433 ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} { 434 send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n" 435 gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" { 436 "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" 437 "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" 438 "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" 439 "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" 440 "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" 441 } 442} 443 444#go -until 1286 445gdb_test "tbreak 1286" \ 446 "Breakpoint .* file .*call-ar-st.c, line 1286.*" \ 447 "tbreakpoint line 1286" 448 449gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286" 450 451if { [istarget "hppa*-*-hpux*"] } { 452 # 453 # NOTE:(FIXME) 454 # the aCC demangler cannot demangle the name of a function with >10 args. 455 # so I added a .* after the name of the function, to match the 456 # incredibly long mangled name 457 # (getting aCC's libdemangle.a bundled w/ the system?) 458 # DTS CLLbs16994 coulter 990114 459 # 460 # FIXME: use step for hppa* testing for now 461 # guo 990621 462 # 463 send_gdb "step\n" 464 gdb_expect { 465 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"} 466 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } 467 timeout { fail "step into print_long_arg_list (timeout)" } 468 } 469} else { 470 471 # We can't just assume that a "step" will get us into 472 # print_long_arg_list here,either. 473 gdb_test "tbreak print_long_arg_list" \ 474 "Breakpoint .* file .*call-ar-st.c, line .*" \ 475 "tbreak in print_long_arg_list after stepping into memcpy" 476 # The short match case below handles cases where a buffer 477 # overflows or something, and expect can't deal with the full 478 # line. Perhaps a more elegant solution exists... -sts 1999-08-17 479 send_gdb "continue\n" 480 if {![gdb_skip_float_test "step into print_long_arg_list"]} { 481 gdb_expect { 482 -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" } 483 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"} 484 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } 485 timeout { fail "step into print_long_arg_list (timeout)" } 486 } 487 } else { 488 # If skipping float tests, don't expect anything in arg list. 489 gdb_expect { 490 -re ".*print_long_arg_list \\(.*\\).*$gdb_prompt $" { pass "step into print_long_arg_list" } 491 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } 492 timeout { fail "step into print_long_arg_list (timeout)" } 493 } 494 } 495} 496 497set ws "\[\n\r\t \]+" 498 499#call print_small_structs(struct1, struct2, struct3, struct4, flags, 500# flags_combo, three_char, five_char, int_char_combo, 501# d1, d2, d3, f1, f2, f3) 502 503if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \ 504 ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } { 505 506 # On 32-bit SPARC, some of the args are passed by ref, others by 507 # value, and GDB gets confused and says "Invalid cast" because it 508 # thinks it has to cast the structure into a pointer to structure. 509 if { [test_debug_format "stabs"] } then { 510 setup_kfail "gdb/1539" "sparc-*-*" 511 } 512 513 send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n" 514 gdb_expect_list "print print_small_structs from print_long_arg_list" ".*$gdb_prompt $" { 515 "\[\t\r\n \]+alpha" 516 "\[\t\r\n \]+gamma" 517 "\[\t\r\n \]+epsilon" 518 "\[\t\r\n \]+alpha" 519 "\[\t\r\n \]+gamma" 520 "\[\t\r\n \]+epsilon" 521 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 522 "\[\t\r\n \]+Contents of three_char_t:" 523 "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c" 524 "\[\t\r\n \]+Contents of five_char_t:" 525 "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" 526 "\[\t\r\n \]+Contents of int_char_combo_t:" 527 "\[\t\r\n \]+123\[ \t\]*z" 528 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 529 "\[\t\r\n \]+52" 530 "\[\t\r\n \]+Contents of struct1:" 531 "\[\t\r\n \]+6\[ \t\]*0" 532 "\[\t\r\n \]+Contents of struct2:" 533 "\[\t\r\n \]+10\[ \t\]*0" 534 "\[\t\r\n \]+Contents of struct3:" 535 "\[\t\r\n \]+12\[ \t\]*0" 536 "\[\t\r\n \]+Contents of one_double_t:" 537 "\[\t\r\n \]+10.500000" 538 "\[\t\r\n \]+Contents of one_double_t:" 539 "\[\t\r\n \]+-3.375000" 540 "\[\t\r\n \]+Contents of one_double_t:" 541 "\[\t\r\n \]+675.093750" 542 "\[\t\r\n \]+Contents of two_floats_t:" 543 "\[\t\r\n \]+45.234001\[ \t\]*43.599998" 544 "\[\t\r\n \]+Contents of two_floats_t:" 545 "\[\t\r\n \]+78.010002\[ \t\]*122.099998" 546 "\[\t\r\n \]+Contents of two_floats_t:" 547 "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007" 548 } 549} 550 551 552#go -until 1300 553gdb_test "tbreak 1300" \ 554 "Breakpoint.* file .*call-ar-st.c, line 1300.*" \ 555 "tbreakpoint line 1300" 556 557if ![gdb_skip_stdio_test "continuing to 1300"] { 558 gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \ 559 "continue to 1300" 560} else { 561 gdb_test "continue" "" "" 562} 563 564#step 565 send_gdb "step\n" 566 gdb_expect { 567 -re " 568init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;.*$gdb_prompt $" { 569 pass "step into init_bit_flags_combo"} 570 -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" } 571 timeout { fail "step into init_bit_flags_combo (timeout)" } 572 } 573 574#call print_bit_flags_combo(*bit_flags_combo) 575if ![gdb_skip_stdio_test "continuing to 1300"] { 576 send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n" 577 gdb_expect { 578 -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" { 579 pass "print print_bit_flags_combo from init_bit_flags_combo" 580 } 581 -re ".*$gdb_prompt $" { 582 fail "print print_bit_flags_combo from init_bit_flags_combo" 583 } 584 timeout { 585 fail "(timeout) print_bit_flags_combo from init_bit_flags_combo" 586 } 587 } 588} 589 590 591#go -until 1305 592gdb_test "tbreak 1305" \ 593 "Breakpoint.* file .*call-ar-st.c, line 1305.*" \ 594 "tbreakpoint line 1305" 595 596gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \ 597"continue to 1305" 598 599#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 600 601# FIXME: 602# HP aCC demangler currently does not handle hp aCC functions with >10 args 603# DTS CLLbs16994 coulter 990114 604 605if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994} 606 607if {![gdb_skip_float_test "print print_long_arg_list"] && \ 608 ![gdb_skip_stdio_test "print print_long_arg_list"] } { 609 send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n" 610 gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" { 611 "\[ \n\r\t\]+double : 22.250000" 612 "\[ \n\r\t\]+double : 33.375000" 613 "\[ \n\r\t\]+int : 0" 614 "\[ \n\r\t\]+int : -25" 615 "\[ \n\r\t\]+int : 100" 616 "\[ \n\r\t\]+int : 2345" 617 "\[ \n\r\t\]+alpha" 618 "\[ \n\r\t\]+gamma" 619 "\[ \n\r\t\]+epsilon" 620 "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n" 621 "\[ \n\r\t\]+Contents of three_char_t:" 622 "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z" 623 "\[ \n\r\t\]+Contents of five_char_t:" 624 "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o" 625 "\[ \n\r\t\]+Contents of int_char_combo_t:" 626 "\[ \n\r\t\]+123\[ \t\]+z" 627 "\[ \n\r\t\]+Sum of the 4 struct values and seed :" 628 "\[ \n\r\t\]+52" 629 "\[ \n\r\t\]+Contents of struct1:" 630 "\[ \n\r\t\]+6\[ \t\]+0" 631 "\[ \n\r\t\]+Contents of struct2:" 632 "\[ \n\r\t\]+10\[ \t\]+0" 633 "\[ \n\r\t\]+Contents of struct3:" 634 "\[ \n\r\t\]+12\[ \t\]+0" 635 "\[ \n\r\t\]+Contents of one_double_t:" 636 "\[ \n\r\t\]+1.111110" 637 "\[ \n\r\t\]+Contents of one_double_t:" 638 "\[ \n\r\t\]+-345.340000" 639 "\[ \n\r\t\]+Contents of one_double_t:" 640 "\[ \n\r\t\]+546464.200000" 641 "\[ \n\r\t\]+Contents of two_floats_t:" 642 "\[ \n\r\t\]+0.234000\[ \t\]+453.100006" 643 "\[ \n\r\t\]+Contents of two_floats_t:" 644 "\[ \n\r\t\]+78.345001\[ \t\]+23.090000" 645 "\[ \n\r\t\]+Contents of two_floats_t:" 646 "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000" 647 } 648} 649 650 651#go -until 1311 652gdb_test "tbreak 1311" \ 653 "Breakpoint.* file .*call-ar-st.c, line 1311.*" \ 654 "tbreakpoint line 1311" 655 656gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \ 657"continue to 1311" 658 659 660#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4) 661if ![gdb_skip_stdio_test "print sum_struct_print(...)"] { 662 send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n" 663 gdb_expect { 664 -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" { 665 pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" 666 } 667 -re ".*$gdb_prompt $" { 668 fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" 669 } 670 timeout { 671 fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" 672 } 673 } 674} 675 676 677#call print_struct_rep(*struct1, *struct2, *struct3) 678if ![gdb_skip_stdio_test "print print_struct_rep(...)"] { 679 send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n" 680 gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \ 681 ".*$gdb_prompt $" { 682 "\[ \t\n\r\]+Contents of struct1:" 683 "\[ \t\n\r\]+ 22 0" 684 "\[ \t\n\r\]+Contents of struct2:" 685 "\[ \t\n\r\]+ 42 0" 686 "\[ \t\n\r\]+Contents of struct3:" 687 "\[ \t\n\r\]+ 62 0" 688 } 689} 690 691if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] { 692 send_gdb "print print_one_large_struct(*list1)\n" 693 gdb_expect { 694 -re ".* 4 1.*$gdb_prompt $" { 695 pass "print print_one_large_struct(*list1)" 696 } 697 -re ".*$gdb_prompt $" { 698 fail "print print_one_large_struct(*list1)" 699 } 700 timeout { 701 fail "(timeout) print_one_large_struct(*list1)" 702 } 703 } 704} 705 706set timeout $oldtimeout 707return 708 709