1/* 2 * Agere Systems Inc. 3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs 4 * 5 * Copyright �� 2005 Agere Systems Inc. 6 * All rights reserved. 7 * http://www.agere.com 8 * 9 *------------------------------------------------------------------------------ 10 * 11 * et131x_adapter.h - Header which includes the private adapter structure, along 12 * with related support structures, macros, definitions, etc. 13 * 14 *------------------------------------------------------------------------------ 15 * 16 * SOFTWARE LICENSE 17 * 18 * This software is provided subject to the following terms and conditions, 19 * which you should read carefully before using the software. Using this 20 * software indicates your acceptance of these terms and conditions. If you do 21 * not agree with these terms and conditions, do not use the software. 22 * 23 * Copyright �� 2005 Agere Systems Inc. 24 * All rights reserved. 25 * 26 * Redistribution and use in source or binary forms, with or without 27 * modifications, are permitted provided that the following conditions are met: 28 * 29 * . Redistributions of source code must retain the above copyright notice, this 30 * list of conditions and the following Disclaimer as comments in the code as 31 * well as in the documentation and/or other materials provided with the 32 * distribution. 33 * 34 * . Redistributions in binary form must reproduce the above copyright notice, 35 * this list of conditions and the following Disclaimer in the documentation 36 * and/or other materials provided with the distribution. 37 * 38 * . Neither the name of Agere Systems Inc. nor the names of the contributors 39 * may be used to endorse or promote products derived from this software 40 * without specific prior written permission. 41 * 42 * Disclaimer 43 * 44 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 45 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF 46 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY 47 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN 48 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY 49 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 50 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 51 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 52 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT 53 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 54 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 55 * DAMAGE. 56 * 57 */ 58 59#ifndef __ET131X_ADAPTER_H__ 60#define __ET131X_ADAPTER_H__ 61 62#include "et1310_address_map.h" 63#include "et1310_tx.h" 64#include "et1310_rx.h" 65 66/* 67 * Do not change these values: if changed, then change also in respective 68 * TXdma and Rxdma engines 69 */ 70#define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */ 71#define NUM_TCB 64 72 73/* 74 * These values are all superseded by registry entries to facilitate tuning. 75 * Once the desired performance has been achieved, the optimal registry values 76 * should be re-populated to these #defines: 77 */ 78#define NUM_TRAFFIC_CLASSES 1 79 80#define TX_ERROR_PERIOD 1000 81 82#define LO_MARK_PERCENT_FOR_PSR 15 83#define LO_MARK_PERCENT_FOR_RX 15 84 85/* RFD (Receive Frame Descriptor) */ 86typedef struct _MP_RFD { 87 struct list_head list_node; 88 struct sk_buff *Packet; 89 u32 PacketSize; /* total size of receive frame */ 90 u16 bufferindex; 91 u8 ringindex; 92} MP_RFD, *PMP_RFD; 93 94/* Enum for Flow Control */ 95typedef enum _eflow_control_t { 96 Both = 0, 97 TxOnly = 1, 98 RxOnly = 2, 99 None = 3 100} eFLOW_CONTROL_t, *PeFLOW_CONTROL_t; 101 102/* Struct to define some device statistics */ 103typedef struct _ce_stats_t { 104 /* Link Input/Output stats */ 105 uint64_t ipackets; /* # of in packets */ 106 uint64_t opackets; /* # of out packets */ 107 108 /* MIB II variables 109 * 110 * NOTE: atomic_t types are only guaranteed to store 24-bits; if we 111 * MUST have 32, then we'll need another way to perform atomic 112 * operations 113 */ 114 u32 unircv; /* # multicast packets received */ 115 atomic_t unixmt; /* # multicast packets for Tx */ 116 u32 multircv; /* # multicast packets received */ 117 atomic_t multixmt; /* # multicast packets for Tx */ 118 u32 brdcstrcv; /* # broadcast packets received */ 119 atomic_t brdcstxmt; /* # broadcast packets for Tx */ 120 u32 norcvbuf; /* # Rx packets discarded */ 121 u32 noxmtbuf; /* # Tx packets discarded */ 122 123 /* Transciever state informations. */ 124 u8 xcvr_addr; 125 u32 xcvr_id; 126 127 /* Tx Statistics. */ 128 u32 tx_uflo; /* Tx Underruns */ 129 130 u32 collisions; 131 u32 excessive_collisions; 132 u32 first_collision; 133 u32 late_collisions; 134 u32 max_pkt_error; 135 u32 tx_deferred; 136 137 /* Rx Statistics. */ 138 u32 rx_ov_flow; /* Rx Overflow */ 139 140 u32 length_err; 141 u32 alignment_err; 142 u32 crc_err; 143 u32 code_violations; 144 u32 other_errors; 145 146 u32 SynchrounousIterations; 147 u32 InterruptStatus; 148} CE_STATS_t, *PCE_STATS_t; 149 150typedef struct _MP_POWER_MGMT { 151 /* variable putting the phy into coma mode when boot up with no cable 152 * plugged in after 5 seconds 153 */ 154 u8 TransPhyComaModeOnBoot; 155 156 /* Next two used to save power information at power down. This 157 * information will be used during power up to set up parts of Power 158 * Management in JAGCore 159 */ 160 u16 PowerDownSpeed; 161 u8 PowerDownDuplex; 162} MP_POWER_MGMT, *PMP_POWER_MGMT; 163 164/* The private adapter structure */ 165struct et131x_adapter { 166 struct net_device *netdev; 167 struct pci_dev *pdev; 168 169 struct work_struct task; 170 171 /* Flags that indicate current state of the adapter */ 172 u32 Flags; 173 u32 HwErrCount; 174 175 /* Configuration */ 176 u8 PermanentAddress[ETH_ALEN]; 177 u8 CurrentAddress[ETH_ALEN]; 178 bool has_eeprom; 179 u8 eepromData[2]; 180 181 /* Spinlocks */ 182 spinlock_t Lock; 183 184 spinlock_t TCBSendQLock; 185 spinlock_t TCBReadyQLock; 186 spinlock_t SendHWLock; 187 188 spinlock_t RcvLock; 189 spinlock_t RcvPendLock; 190 spinlock_t FbrLock; 191 192 spinlock_t PHYLock; 193 194 /* Packet Filter and look ahead size */ 195 u32 PacketFilter; 196 u32 linkspeed; 197 u32 duplex_mode; 198 199 /* multicast list */ 200 u32 MCAddressCount; 201 u8 MCList[NIC_MAX_MCAST_LIST][ETH_ALEN]; 202 203 /* Pointer to the device's PCI register space */ 204 ADDRESS_MAP_t __iomem *regs; 205 206 /* Registry parameters */ 207 u8 SpeedDuplex; /* speed/duplex */ 208 eFLOW_CONTROL_t RegistryFlowControl; /* for 802.3x flow control */ 209 u8 RegistryPhyComa; /* Phy Coma mode enable/disable */ 210 211 u32 RegistryRxMemEnd; /* Size of internal rx memory */ 212 u32 RegistryJumboPacket; /* Max supported ethernet packet size */ 213 214 215 /* Derived from the registry: */ 216 u8 AiForceDpx; /* duplex setting */ 217 u16 AiForceSpeed; /* 'Speed', user over-ride of line speed */ 218 eFLOW_CONTROL_t FlowControl; /* flow control validated by the far-end */ 219 enum { 220 NETIF_STATUS_INVALID = 0, 221 NETIF_STATUS_MEDIA_CONNECT, 222 NETIF_STATUS_MEDIA_DISCONNECT, 223 NETIF_STATUS_MAX 224 } MediaState; 225 226 /* Minimize init-time */ 227 struct timer_list ErrorTimer; 228 MP_POWER_MGMT PoMgmt; 229 u32 CachedMaskValue; 230 231 /* Xcvr status at last poll */ 232 MI_BMSR_t Bmsr; 233 234 /* Tx Memory Variables */ 235 struct tx_ring tx_ring; 236 237 /* Rx Memory Variables */ 238 struct rx_ring rx_ring; 239 240 /* Loopback specifics */ 241 u8 ReplicaPhyLoopbk; /* Replica Enable */ 242 u8 ReplicaPhyLoopbkPF; /* Replica Enable Pass/Fail */ 243 244 /* Stats */ 245 CE_STATS_t Stats; 246 247 struct net_device_stats net_stats; 248 struct net_device_stats net_stats_prev; 249}; 250 251#endif /* __ET131X_ADAPTER_H__ */ 252