• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6/drivers/net/wireless/ath/ath5k/
1/*
2 * Copyright (C) 2010 Bruno Randolf <br1@einfach.org>
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16#ifndef ANI_H
17#define ANI_H
18
19/* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */
20#define ATH5K_ANI_LISTEN_PERIOD		100
21#define ATH5K_ANI_OFDM_TRIG_HIGH	500
22#define ATH5K_ANI_OFDM_TRIG_LOW		200
23#define ATH5K_ANI_CCK_TRIG_HIGH		200
24#define ATH5K_ANI_CCK_TRIG_LOW		100
25
26/* average beacon RSSI thresholds */
27#define ATH5K_ANI_RSSI_THR_HIGH		40
28#define ATH5K_ANI_RSSI_THR_LOW		7
29
30/* maximum availabe levels */
31#define ATH5K_ANI_MAX_FIRSTEP_LVL	2
32#define ATH5K_ANI_MAX_NOISE_IMM_LVL	1
33
34
35/**
36 * enum ath5k_ani_mode - mode for ANI / noise sensitivity
37 *
38 * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI
39 *	algorithm after it has been on auto mode.
40 * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low,
41 *	maximizing sensitivity. ANI will not run.
42 * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high,
43 *	minimizing sensitivity. ANI will not run.
44 * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the
45 *	amount of OFDM and CCK frame errors (default).
46 */
47enum ath5k_ani_mode {
48	ATH5K_ANI_MODE_OFF		= 0,
49	ATH5K_ANI_MODE_MANUAL_LOW	= 1,
50	ATH5K_ANI_MODE_MANUAL_HIGH	= 2,
51	ATH5K_ANI_MODE_AUTO		= 3
52};
53
54
55/**
56 * struct ath5k_ani_state - ANI state and associated counters
57 *
58 * @max_spur_level: the maximum spur level is chip dependent
59 */
60struct ath5k_ani_state {
61	enum ath5k_ani_mode	ani_mode;
62
63	/* state */
64	int			noise_imm_level;
65	int			spur_level;
66	int			firstep_level;
67	bool			ofdm_weak_sig;
68	bool			cck_weak_sig;
69
70	int			max_spur_level;
71
72	/* used by the algorithm */
73	unsigned int		listen_time;
74	unsigned int		ofdm_errors;
75	unsigned int		cck_errors;
76
77	/* debug/statistics only: numbers from last ANI calibration */
78	unsigned int		pfc_tx;
79	unsigned int		pfc_rx;
80	unsigned int		pfc_busy;
81	unsigned int		pfc_cycles;
82	unsigned int		last_listen;
83	unsigned int		last_ofdm_errors;
84	unsigned int		last_cck_errors;
85	unsigned int		sum_ofdm_errors;
86	unsigned int		sum_cck_errors;
87};
88
89void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode);
90void ath5k_ani_mib_intr(struct ath5k_hw *ah);
91void ath5k_ani_calibration(struct ath5k_hw *ah);
92void ath5k_ani_phy_error_report(struct ath5k_hw *ah,
93				enum ath5k_phy_error_code phyerr);
94
95/* for manual control */
96void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level);
97void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level);
98void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level);
99void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on);
100void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on);
101
102void ath5k_ani_print_counters(struct ath5k_hw *ah);
103
104#endif /* ANI_H */
105