1/* 2 3 bttv-cards.c 4 5 this file has configuration informations - card-specific stuff 6 like the big tvcards array for the most part 7 8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 9 & Marcus Metzler (mocm@thp.uni-koeln.de) 10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 11 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; either version 2 of the License, or 15 (at your option) any later version. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 You should have received a copy of the GNU General Public License 23 along with this program; if not, write to the Free Software 24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 26*/ 27 28#include <linux/delay.h> 29#include <linux/module.h> 30#include <linux/kmod.h> 31#include <linux/init.h> 32#include <linux/pci.h> 33#include <linux/vmalloc.h> 34#include <linux/firmware.h> 35#include <net/checksum.h> 36 37#include <asm/unaligned.h> 38#include <asm/io.h> 39 40#include "bttvp.h" 41#include <media/v4l2-common.h> 42#include <media/tvaudio.h> 43#include "bttv-audio-hook.h" 44 45/* fwd decl */ 46static void boot_msp34xx(struct bttv *btv, int pin); 47static void hauppauge_eeprom(struct bttv *btv); 48static void avermedia_eeprom(struct bttv *btv); 49static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 50static void modtec_eeprom(struct bttv *btv); 51static void init_PXC200(struct bttv *btv); 52static void init_RTV24(struct bttv *btv); 53 54static void rv605_muxsel(struct bttv *btv, unsigned int input); 55static void eagle_muxsel(struct bttv *btv, unsigned int input); 56static void xguard_muxsel(struct bttv *btv, unsigned int input); 57static void ivc120_muxsel(struct bttv *btv, unsigned int input); 58static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 59 60static void PXC200_muxsel(struct bttv *btv, unsigned int input); 61 62static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 63static void picolo_tetra_init(struct bttv *btv); 64 65static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 66static void tibetCS16_init(struct bttv *btv); 67 68static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 69static void kodicom4400r_init(struct bttv *btv); 70 71static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 72static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 73 74static void geovision_muxsel(struct bttv *btv, unsigned int input); 75 76static void phytec_muxsel(struct bttv *btv, unsigned int input); 77 78static void gv800s_muxsel(struct bttv *btv, unsigned int input); 79static void gv800s_init(struct bttv *btv); 80 81static int terratec_active_radio_upgrade(struct bttv *btv); 82static int tea5757_read(struct bttv *btv); 83static int tea5757_write(struct bttv *btv, int value); 84static void identify_by_eeprom(struct bttv *btv, 85 unsigned char eeprom_data[256]); 86static int __devinit pvr_boot(struct bttv *btv); 87 88/* config variables */ 89static unsigned int triton1; 90static unsigned int vsfx; 91static unsigned int latency = UNSET; 92int no_overlay=-1; 93 94static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 95static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 96static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 97static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 98static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 99static unsigned int audiodev[BTTV_MAX]; 100static unsigned int saa6588[BTTV_MAX]; 101static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 102static unsigned int autoload = UNSET; 103static unsigned int gpiomask = UNSET; 104static unsigned int audioall = UNSET; 105static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 106 107/* insmod options */ 108module_param(triton1, int, 0444); 109module_param(vsfx, int, 0444); 110module_param(no_overlay, int, 0444); 111module_param(latency, int, 0444); 112module_param(gpiomask, int, 0444); 113module_param(audioall, int, 0444); 114module_param(autoload, int, 0444); 115 116module_param_array(card, int, NULL, 0444); 117module_param_array(pll, int, NULL, 0444); 118module_param_array(tuner, int, NULL, 0444); 119module_param_array(svhs, int, NULL, 0444); 120module_param_array(remote, int, NULL, 0444); 121module_param_array(audiodev, int, NULL, 0444); 122module_param_array(audiomux, int, NULL, 0444); 123 124MODULE_PARM_DESC(triton1,"set ETBF pci config bit " 125 "[enable bug compatibility for triton1 + others]"); 126MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " 127 "[yet another chipset flaw workaround]"); 128MODULE_PARM_DESC(latency,"pci latency timer"); 129MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 130MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); 131MODULE_PARM_DESC(tuner,"specify installed tuner type"); 132MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 133MODULE_PARM_DESC(audiodev, "specify audio device:\n" 134 "\t\t-1 = no audio\n" 135 "\t\t 0 = autodetect (default)\n" 136 "\t\t 1 = msp3400\n" 137 "\t\t 2 = tda7432\n" 138 "\t\t 3 = tvaudio"); 139MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 140MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" 141 " [some VIA/SIS chipsets are known to have problem with overlay]"); 142 143/* ----------------------------------------------------------------------- */ 144/* list of card IDs for bt878+ cards */ 145 146static struct CARD { 147 unsigned id; 148 int cardnr; 149 char *name; 150} cards[] __devinitdata = { 151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 160 161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 163 164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 173 174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 175 /* some cards ship with byteswapped IDs ... */ 176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 178 /* this seems to happen as well ... */ 179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 180 181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 184 185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 192 193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 198 199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 203 204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 206 /* clashes with FlyVideo 207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 212 213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 218 219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 224 225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 229 230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 234 235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 244 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 245 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 246 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 247 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 248 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 249 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 250 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 251 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 252 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 253 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 254 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 255 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 256 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 258 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 259 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 260 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 261 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 262 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 263 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 264 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 265 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 266 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 267 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 268 269 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 270 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 271 272 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 273 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 274 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 275 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 276 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 277 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 278 279 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 280 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 281 282 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 283 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 284 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 285 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, 286 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 287 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 288 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 289 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 290 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 291 292 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 293 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 294 295 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 296 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 297 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 298 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 299 300 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 301 302 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 303 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 304 305 /* likely broken, vendor id doesn't match the other magic views ... 306 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 307 308 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 309 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 310 311 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 312 313 /* DVB cards (using pci function .1 for mpeg data xfer) */ 314 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 315 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 316 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 317 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 318 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 319 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 320 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 321 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 322 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 323 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 324 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 325 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 326 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 327 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 328 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 329 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 330 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 331 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 332 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 333 334 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 335 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 336 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 337 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 338 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 339 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 340 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 341 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 342 343 { 0, -1, NULL } 344}; 345 346/* ----------------------------------------------------------------------- */ 347/* array with description for bt848 / bt878 tv/grabber cards */ 348 349struct tvcard bttv_tvcards[] = { 350 /* ---- card 0x00 ---------------------------------- */ 351 [BTTV_BOARD_UNKNOWN] = { 352 .name = " *** UNKNOWN/GENERIC *** ", 353 .video_inputs = 4, 354 .svhs = 2, 355 .muxsel = MUXSEL(2, 3, 1, 0), 356 .tuner_type = UNSET, 357 .tuner_addr = ADDR_UNSET, 358 }, 359 [BTTV_BOARD_MIRO] = { 360 .name = "MIRO PCTV", 361 .video_inputs = 4, 362 /* .audio_inputs= 1, */ 363 .svhs = 2, 364 .gpiomask = 15, 365 .muxsel = MUXSEL(2, 3, 1, 1), 366 .gpiomux = { 2, 0, 0, 0 }, 367 .gpiomute = 10, 368 .needs_tvaudio = 1, 369 .tuner_type = UNSET, 370 .tuner_addr = ADDR_UNSET, 371 }, 372 [BTTV_BOARD_HAUPPAUGE] = { 373 .name = "Hauppauge (bt848)", 374 .video_inputs = 4, 375 /* .audio_inputs= 1, */ 376 .svhs = 2, 377 .gpiomask = 7, 378 .muxsel = MUXSEL(2, 3, 1, 1), 379 .gpiomux = { 0, 1, 2, 3 }, 380 .gpiomute = 4, 381 .needs_tvaudio = 1, 382 .tuner_type = UNSET, 383 .tuner_addr = ADDR_UNSET, 384 }, 385 [BTTV_BOARD_STB] = { 386 .name = "STB, Gateway P/N 6000699 (bt848)", 387 .video_inputs = 3, 388 /* .audio_inputs= 1, */ 389 .svhs = 2, 390 .gpiomask = 7, 391 .muxsel = MUXSEL(2, 3, 1, 1), 392 .gpiomux = { 4, 0, 2, 3 }, 393 .gpiomute = 1, 394 .no_msp34xx = 1, 395 .needs_tvaudio = 1, 396 .tuner_type = TUNER_PHILIPS_NTSC, 397 .tuner_addr = ADDR_UNSET, 398 .pll = PLL_28, 399 .has_radio = 1, 400 }, 401 402 /* ---- card 0x04 ---------------------------------- */ 403 [BTTV_BOARD_INTEL] = { 404 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 405 .video_inputs = 4, 406 /* .audio_inputs= 0, */ 407 .svhs = 2, 408 .gpiomask = 0, 409 .muxsel = MUXSEL(2, 3, 1, 1), 410 .gpiomux = { 0 }, 411 .needs_tvaudio = 0, 412 .tuner_type = TUNER_ABSENT, 413 .tuner_addr = ADDR_UNSET, 414 }, 415 [BTTV_BOARD_DIAMOND] = { 416 .name = "Diamond DTV2000", 417 .video_inputs = 4, 418 /* .audio_inputs= 1, */ 419 .svhs = 2, 420 .gpiomask = 3, 421 .muxsel = MUXSEL(2, 3, 1, 0), 422 .gpiomux = { 0, 1, 0, 1 }, 423 .gpiomute = 3, 424 .needs_tvaudio = 1, 425 .tuner_type = UNSET, 426 .tuner_addr = ADDR_UNSET, 427 }, 428 [BTTV_BOARD_AVERMEDIA] = { 429 .name = "AVerMedia TVPhone", 430 .video_inputs = 3, 431 /* .audio_inputs= 1, */ 432 .svhs = 3, 433 .muxsel = MUXSEL(2, 3, 1, 1), 434 .gpiomask = 0x0f, 435 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 436 /* 0x04 for some cards ?? */ 437 .needs_tvaudio = 1, 438 .tuner_type = UNSET, 439 .tuner_addr = ADDR_UNSET, 440 .audio_mode_gpio= avermedia_tvphone_audio, 441 .has_remote = 1, 442 }, 443 [BTTV_BOARD_MATRIX_VISION] = { 444 .name = "MATRIX-Vision MV-Delta", 445 .video_inputs = 5, 446 /* .audio_inputs= 1, */ 447 .svhs = 3, 448 .gpiomask = 0, 449 .muxsel = MUXSEL(2, 3, 1, 0, 0), 450 .gpiomux = { 0 }, 451 .needs_tvaudio = 1, 452 .tuner_type = TUNER_ABSENT, 453 .tuner_addr = ADDR_UNSET, 454 }, 455 456 /* ---- card 0x08 ---------------------------------- */ 457 [BTTV_BOARD_FLYVIDEO] = { 458 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 459 .video_inputs = 4, 460 /* .audio_inputs= 1, */ 461 .svhs = 2, 462 .gpiomask = 0xc00, 463 .muxsel = MUXSEL(2, 3, 1, 1), 464 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 465 .gpiomute = 0xc00, 466 .needs_tvaudio = 1, 467 .pll = PLL_28, 468 .tuner_type = UNSET, 469 .tuner_addr = ADDR_UNSET, 470 }, 471 [BTTV_BOARD_TURBOTV] = { 472 .name = "IMS/IXmicro TurboTV", 473 .video_inputs = 3, 474 /* .audio_inputs= 1, */ 475 .svhs = 2, 476 .gpiomask = 3, 477 .muxsel = MUXSEL(2, 3, 1, 1), 478 .gpiomux = { 1, 1, 2, 3 }, 479 .needs_tvaudio = 0, 480 .pll = PLL_28, 481 .tuner_type = TUNER_TEMIC_PAL, 482 .tuner_addr = ADDR_UNSET, 483 }, 484 [BTTV_BOARD_HAUPPAUGE878] = { 485 .name = "Hauppauge (bt878)", 486 .video_inputs = 4, 487 /* .audio_inputs= 1, */ 488 .svhs = 2, 489 .gpiomask = 0x0f, /* old: 7 */ 490 .muxsel = MUXSEL(2, 0, 1, 1), 491 .gpiomux = { 0, 1, 2, 3 }, 492 .gpiomute = 4, 493 .needs_tvaudio = 1, 494 .pll = PLL_28, 495 .tuner_type = UNSET, 496 .tuner_addr = ADDR_UNSET, 497 }, 498 [BTTV_BOARD_MIROPRO] = { 499 .name = "MIRO PCTV pro", 500 .video_inputs = 3, 501 /* .audio_inputs= 1, */ 502 .svhs = 2, 503 .gpiomask = 0x3014f, 504 .muxsel = MUXSEL(2, 3, 1, 1), 505 .gpiomux = { 0x20001,0x10001, 0, 0 }, 506 .gpiomute = 10, 507 .needs_tvaudio = 1, 508 .tuner_type = UNSET, 509 .tuner_addr = ADDR_UNSET, 510 }, 511 512 /* ---- card 0x0c ---------------------------------- */ 513 [BTTV_BOARD_ADSTECH_TV] = { 514 .name = "ADS Technologies Channel Surfer TV (bt848)", 515 .video_inputs = 3, 516 /* .audio_inputs= 1, */ 517 .svhs = 2, 518 .gpiomask = 15, 519 .muxsel = MUXSEL(2, 3, 1, 1), 520 .gpiomux = { 13, 14, 11, 7 }, 521 .needs_tvaudio = 1, 522 .tuner_type = UNSET, 523 .tuner_addr = ADDR_UNSET, 524 }, 525 [BTTV_BOARD_AVERMEDIA98] = { 526 .name = "AVerMedia TVCapture 98", 527 .video_inputs = 3, 528 /* .audio_inputs= 4, */ 529 .svhs = 2, 530 .gpiomask = 15, 531 .muxsel = MUXSEL(2, 3, 1, 1), 532 .gpiomux = { 13, 14, 11, 7 }, 533 .needs_tvaudio = 1, 534 .msp34xx_alt = 1, 535 .pll = PLL_28, 536 .tuner_type = TUNER_PHILIPS_PAL, 537 .tuner_addr = ADDR_UNSET, 538 .audio_mode_gpio= avermedia_tv_stereo_audio, 539 .no_gpioirq = 1, 540 }, 541 [BTTV_BOARD_VHX] = { 542 .name = "Aimslab Video Highway Xtreme (VHX)", 543 .video_inputs = 3, 544 /* .audio_inputs= 1, */ 545 .svhs = 2, 546 .gpiomask = 7, 547 .muxsel = MUXSEL(2, 3, 1, 1), 548 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 549 .gpiomute = 4, 550 .needs_tvaudio = 1, 551 .pll = PLL_28, 552 .tuner_type = UNSET, 553 .tuner_addr = ADDR_UNSET, 554 }, 555 [BTTV_BOARD_ZOLTRIX] = { 556 .name = "Zoltrix TV-Max", 557 .video_inputs = 3, 558 /* .audio_inputs= 1, */ 559 .svhs = 2, 560 .gpiomask = 15, 561 .muxsel = MUXSEL(2, 3, 1, 1), 562 .gpiomux = { 0, 0, 1, 0 }, 563 .gpiomute = 10, 564 .needs_tvaudio = 1, 565 .tuner_type = UNSET, 566 .tuner_addr = ADDR_UNSET, 567 }, 568 569 /* ---- card 0x10 ---------------------------------- */ 570 [BTTV_BOARD_PIXVIEWPLAYTV] = { 571 .name = "Prolink Pixelview PlayTV (bt878)", 572 .video_inputs = 3, 573 /* .audio_inputs= 1, */ 574 .svhs = 2, 575 .gpiomask = 0x01fe00, 576 .muxsel = MUXSEL(2, 3, 1, 1), 577 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 578 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 579 .gpiomute = 0x002000, 580 .needs_tvaudio = 1, 581 .pll = PLL_28, 582 .tuner_type = UNSET, 583 .tuner_addr = ADDR_UNSET, 584 }, 585 [BTTV_BOARD_WINVIEW_601] = { 586 .name = "Leadtek WinView 601", 587 .video_inputs = 3, 588 /* .audio_inputs= 1, */ 589 .svhs = 2, 590 .gpiomask = 0x8300f8, 591 .muxsel = MUXSEL(2, 3, 1, 1, 0), 592 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 593 .gpiomute = 0xcfa007, 594 .needs_tvaudio = 1, 595 .tuner_type = UNSET, 596 .tuner_addr = ADDR_UNSET, 597 .volume_gpio = winview_volume, 598 .has_radio = 1, 599 }, 600 [BTTV_BOARD_AVEC_INTERCAP] = { 601 .name = "AVEC Intercapture", 602 .video_inputs = 3, 603 /* .audio_inputs= 2, */ 604 .svhs = 2, 605 .gpiomask = 0, 606 .muxsel = MUXSEL(2, 3, 1, 1), 607 .gpiomux = { 1, 0, 0, 0 }, 608 .needs_tvaudio = 1, 609 .tuner_type = UNSET, 610 .tuner_addr = ADDR_UNSET, 611 }, 612 [BTTV_BOARD_LIFE_FLYKIT] = { 613 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 614 .video_inputs = 4, 615 /* .audio_inputs= 1, */ 616 .svhs = NO_SVHS, 617 .gpiomask = 0x8dff00, 618 .muxsel = MUXSEL(2, 3, 1, 1), 619 .gpiomux = { 0 }, 620 .no_msp34xx = 1, 621 .tuner_type = TUNER_ABSENT, 622 .tuner_addr = ADDR_UNSET, 623 }, 624 625 /* ---- card 0x14 ---------------------------------- */ 626 [BTTV_BOARD_CEI_RAFFLES] = { 627 .name = "CEI Raffles Card", 628 .video_inputs = 3, 629 /* .audio_inputs= 3, */ 630 .svhs = 2, 631 .muxsel = MUXSEL(2, 3, 1, 1), 632 .tuner_type = UNSET, 633 .tuner_addr = ADDR_UNSET, 634 }, 635 [BTTV_BOARD_CONFERENCETV] = { 636 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 637 .video_inputs = 4, 638 /* .audio_inputs= 2, tuner, line in */ 639 .svhs = 2, 640 .gpiomask = 0x1800, 641 .muxsel = MUXSEL(2, 3, 1, 1), 642 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 643 .gpiomute = 0x1800, 644 .pll = PLL_28, 645 .tuner_type = TUNER_PHILIPS_PAL_I, 646 .tuner_addr = ADDR_UNSET, 647 }, 648 [BTTV_BOARD_PHOEBE_TVMAS] = { 649 .name = "Askey CPH050/ Phoebe Tv Master + FM", 650 .video_inputs = 3, 651 /* .audio_inputs= 1, */ 652 .svhs = 2, 653 .gpiomask = 0xc00, 654 .muxsel = MUXSEL(2, 3, 1, 1), 655 .gpiomux = { 0, 1, 0x800, 0x400 }, 656 .gpiomute = 0xc00, 657 .needs_tvaudio = 1, 658 .pll = PLL_28, 659 .tuner_type = UNSET, 660 .tuner_addr = ADDR_UNSET, 661 }, 662 [BTTV_BOARD_MODTEC_205] = { 663 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 664 .video_inputs = 3, 665 /* .audio_inputs= 1, */ 666 .svhs = NO_SVHS, 667 .has_dig_in = 1, 668 .gpiomask = 7, 669 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 670 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 671 .gpiomux = { 0, 0, 0, 0 }, 672 .no_msp34xx = 1, 673 .pll = PLL_28, 674 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 675 .tuner_addr = ADDR_UNSET, 676 }, 677 678 /* ---- card 0x18 ---------------------------------- */ 679 [BTTV_BOARD_MAGICTVIEW061] = { 680 .name = "Askey CPH05X/06X (bt878) [many vendors]", 681 .video_inputs = 3, 682 /* .audio_inputs= 1, */ 683 .svhs = 2, 684 .gpiomask = 0xe00, 685 .muxsel = MUXSEL(2, 3, 1, 1), 686 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 687 .gpiomute = 0xc00, 688 .needs_tvaudio = 1, 689 .pll = PLL_28, 690 .tuner_type = UNSET, 691 .tuner_addr = ADDR_UNSET, 692 .has_remote = 1, 693 }, 694 [BTTV_BOARD_VOBIS_BOOSTAR] = { 695 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 696 .video_inputs = 3, 697 /* .audio_inputs= 1, */ 698 .svhs = 2, 699 .gpiomask = 0x1f0fff, 700 .muxsel = MUXSEL(2, 3, 1, 1), 701 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 702 .gpiomute = 0x40000, 703 .needs_tvaudio = 0, 704 .tuner_type = TUNER_PHILIPS_PAL, 705 .tuner_addr = ADDR_UNSET, 706 .audio_mode_gpio= terratv_audio, 707 }, 708 [BTTV_BOARD_HAUPPAUG_WCAM] = { 709 .name = "Hauppauge WinCam newer (bt878)", 710 .video_inputs = 4, 711 /* .audio_inputs= 1, */ 712 .svhs = 3, 713 .gpiomask = 7, 714 .muxsel = MUXSEL(2, 0, 1, 1), 715 .gpiomux = { 0, 1, 2, 3 }, 716 .gpiomute = 4, 717 .needs_tvaudio = 1, 718 .tuner_type = UNSET, 719 .tuner_addr = ADDR_UNSET, 720 }, 721 [BTTV_BOARD_MAXI] = { 722 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 723 .video_inputs = 4, 724 /* .audio_inputs= 2, */ 725 .svhs = 2, 726 .gpiomask = 0x1800, 727 .muxsel = MUXSEL(2, 3, 1, 1), 728 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 729 .gpiomute = 0x1800, 730 .pll = PLL_28, 731 .tuner_type = TUNER_PHILIPS_SECAM, 732 .tuner_addr = ADDR_UNSET, 733 }, 734 735 /* ---- card 0x1c ---------------------------------- */ 736 [BTTV_BOARD_TERRATV] = { 737 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 738 .video_inputs = 3, 739 /* .audio_inputs= 1, */ 740 .svhs = 2, 741 .gpiomask = 0x1f0fff, 742 .muxsel = MUXSEL(2, 3, 1, 1), 743 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 744 .gpiomute = 0x40000, 745 .needs_tvaudio = 0, 746 .tuner_type = TUNER_PHILIPS_PAL, 747 .tuner_addr = ADDR_UNSET, 748 .audio_mode_gpio= terratv_audio, 749 /* GPIO wiring: 750 External 20 pin connector (for Active Radio Upgrade board) 751 gpio00: i2c-sda 752 gpio01: i2c-scl 753 gpio02: om5610-data 754 gpio03: om5610-clk 755 gpio04: om5610-wre 756 gpio05: om5610-stereo 757 gpio06: rds6588-davn 758 gpio07: Pin 7 n.c. 759 gpio08: nIOW 760 gpio09+10: nIOR, nSEL ?? (bt878) 761 gpio09: nIOR (bt848) 762 gpio10: nSEL (bt848) 763 Sound Routing: 764 gpio16: u2-A0 (1st 4052bt) 765 gpio17: u2-A1 766 gpio18: u2-nEN 767 gpio19: u4-A0 (2nd 4052) 768 gpio20: u4-A1 769 u4-nEN - GND 770 Btspy: 771 00000 : Cdrom (internal audio input) 772 10000 : ext. Video audio input 773 20000 : TV Mono 774 a0000 : TV Mono/2 775 1a0000 : TV Stereo 776 30000 : Radio 777 40000 : Mute 778 */ 779 780 }, 781 [BTTV_BOARD_PXC200] = { 782 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 783 .name = "Imagenation PXC200", 784 .video_inputs = 5, 785 /* .audio_inputs= 1, */ 786 .svhs = 1, /* was: 4 */ 787 .gpiomask = 0, 788 .muxsel = MUXSEL(2, 3, 1, 0, 0), 789 .gpiomux = { 0 }, 790 .needs_tvaudio = 1, 791 .tuner_type = TUNER_ABSENT, 792 .tuner_addr = ADDR_UNSET, 793 .muxsel_hook = PXC200_muxsel, 794 795 }, 796 [BTTV_BOARD_FLYVIDEO_98] = { 797 .name = "Lifeview FlyVideo 98 LR50", 798 .video_inputs = 4, 799 /* .audio_inputs= 1, */ 800 .svhs = 2, 801 .gpiomask = 0x1800, /* 0x8dfe00 */ 802 .muxsel = MUXSEL(2, 3, 1, 1), 803 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 804 .gpiomute = 0x1800, 805 .pll = PLL_28, 806 .tuner_type = UNSET, 807 .tuner_addr = ADDR_UNSET, 808 }, 809 [BTTV_BOARD_IPROTV] = { 810 .name = "Formac iProTV, Formac ProTV I (bt848)", 811 .video_inputs = 4, 812 /* .audio_inputs= 1, */ 813 .svhs = 3, 814 .gpiomask = 1, 815 .muxsel = MUXSEL(2, 3, 1, 1), 816 .gpiomux = { 1, 0, 0, 0 }, 817 .pll = PLL_28, 818 .tuner_type = TUNER_PHILIPS_PAL, 819 .tuner_addr = ADDR_UNSET, 820 }, 821 822 /* ---- card 0x20 ---------------------------------- */ 823 [BTTV_BOARD_INTEL_C_S_PCI] = { 824 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 825 .video_inputs = 4, 826 /* .audio_inputs= 0, */ 827 .svhs = 2, 828 .gpiomask = 0, 829 .muxsel = MUXSEL(2, 3, 1, 1), 830 .gpiomux = { 0 }, 831 .needs_tvaudio = 0, 832 .tuner_type = TUNER_ABSENT, 833 .tuner_addr = ADDR_UNSET, 834 }, 835 [BTTV_BOARD_TERRATVALUE] = { 836 .name = "Terratec TerraTValue Version Bt878", 837 .video_inputs = 3, 838 /* .audio_inputs= 1, */ 839 .svhs = 2, 840 .gpiomask = 0xffff00, 841 .muxsel = MUXSEL(2, 3, 1, 1), 842 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 843 .gpiomute = 0x900, 844 .needs_tvaudio = 1, 845 .pll = PLL_28, 846 .tuner_type = TUNER_PHILIPS_PAL, 847 .tuner_addr = ADDR_UNSET, 848 }, 849 [BTTV_BOARD_WINFAST2000] = { 850 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 851 .video_inputs = 4, 852 /* .audio_inputs= 1, */ 853 .svhs = 2, 854 /* TV, CVid, SVid, CVid over SVid connector */ 855 .muxsel = MUXSEL(2, 3, 1, 1, 0), 856 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 857 .gpiomask = 0xb33000, 858 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 859 .gpiomute = 0x800000, 860 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 861 gpio23 -- hef4052:nEnable (0x800000) 862 gpio12 -- hef4052:A1 863 gpio13 -- hef4052:A0 864 0x0000: external audio 865 0x1000: FM 866 0x2000: TV 867 0x3000: n.c. 868 Note: There exists another variant "Winfast 2000" with tv stereo !? 869 Note: eeprom only contains FF and pci subsystem id 107d:6606 870 */ 871 .needs_tvaudio = 0, 872 .pll = PLL_28, 873 .has_radio = 1, 874 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 875 .tuner_addr = ADDR_UNSET, 876 .audio_mode_gpio= winfast2000_audio, 877 .has_remote = 1, 878 }, 879 [BTTV_BOARD_CHRONOS_VS2] = { 880 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 881 .video_inputs = 4, 882 /* .audio_inputs= 3, */ 883 .svhs = 2, 884 .gpiomask = 0x1800, 885 .muxsel = MUXSEL(2, 3, 1, 1), 886 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 887 .gpiomute = 0x1800, 888 .pll = PLL_28, 889 .tuner_type = UNSET, 890 .tuner_addr = ADDR_UNSET, 891 }, 892 893 /* ---- card 0x24 ---------------------------------- */ 894 [BTTV_BOARD_TYPHOON_TVIEW] = { 895 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 896 .video_inputs = 4, 897 /* .audio_inputs= 3, */ 898 .svhs = 2, 899 .gpiomask = 0x1800, 900 .muxsel = MUXSEL(2, 3, 1, 1), 901 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 902 .gpiomute = 0x1800, 903 .pll = PLL_28, 904 .tuner_type = UNSET, 905 .tuner_addr = ADDR_UNSET, 906 .has_radio = 1, 907 }, 908 [BTTV_BOARD_PXELVWPLTVPRO] = { 909 .name = "Prolink PixelView PlayTV pro", 910 .video_inputs = 3, 911 /* .audio_inputs= 1, */ 912 .svhs = 2, 913 .gpiomask = 0xff, 914 .muxsel = MUXSEL(2, 3, 1, 1), 915 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 916 .gpiomute = 0x29, 917 .no_msp34xx = 1, 918 .pll = PLL_28, 919 .tuner_type = UNSET, 920 .tuner_addr = ADDR_UNSET, 921 }, 922 [BTTV_BOARD_MAGICTVIEW063] = { 923 .name = "Askey CPH06X TView99", 924 .video_inputs = 4, 925 /* .audio_inputs= 1, */ 926 .svhs = 2, 927 .gpiomask = 0x551e00, 928 .muxsel = MUXSEL(2, 3, 1, 0), 929 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 930 .gpiomute = 0x551c00, 931 .needs_tvaudio = 1, 932 .pll = PLL_28, 933 .tuner_type = TUNER_PHILIPS_PAL_I, 934 .tuner_addr = ADDR_UNSET, 935 .has_remote = 1, 936 }, 937 [BTTV_BOARD_PINNACLE] = { 938 .name = "Pinnacle PCTV Studio/Rave", 939 .video_inputs = 3, 940 /* .audio_inputs= 1, */ 941 .svhs = 2, 942 .gpiomask = 0x03000F, 943 .muxsel = MUXSEL(2, 3, 1, 1), 944 .gpiomux = { 2, 0xd0001, 0, 0 }, 945 .gpiomute = 1, 946 .needs_tvaudio = 0, 947 .pll = PLL_28, 948 .tuner_type = UNSET, 949 .tuner_addr = ADDR_UNSET, 950 }, 951 952 /* ---- card 0x28 ---------------------------------- */ 953 [BTTV_BOARD_STB2] = { 954 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 955 .video_inputs = 3, 956 /* .audio_inputs= 1, */ 957 .svhs = 2, 958 .gpiomask = 7, 959 .muxsel = MUXSEL(2, 3, 1, 1), 960 .gpiomux = { 4, 0, 2, 3 }, 961 .gpiomute = 1, 962 .no_msp34xx = 1, 963 .needs_tvaudio = 1, 964 .tuner_type = TUNER_PHILIPS_NTSC, 965 .tuner_addr = ADDR_UNSET, 966 .pll = PLL_28, 967 .has_radio = 1, 968 }, 969 [BTTV_BOARD_AVPHONE98] = { 970 .name = "AVerMedia TVPhone 98", 971 .video_inputs = 3, 972 /* .audio_inputs= 4, */ 973 .svhs = 2, 974 .gpiomask = 15, 975 .muxsel = MUXSEL(2, 3, 1, 1), 976 .gpiomux = { 13, 4, 11, 7 }, 977 .needs_tvaudio = 1, 978 .pll = PLL_28, 979 .tuner_type = UNSET, 980 .tuner_addr = ADDR_UNSET, 981 .has_radio = 1, 982 .audio_mode_gpio= avermedia_tvphone_audio, 983 }, 984 [BTTV_BOARD_PV951] = { 985 .name = "ProVideo PV951", /* pic16c54 */ 986 .video_inputs = 3, 987 /* .audio_inputs= 1, */ 988 .svhs = 2, 989 .gpiomask = 0, 990 .muxsel = MUXSEL(2, 3, 1, 1), 991 .gpiomux = { 0, 0, 0, 0}, 992 .needs_tvaudio = 1, 993 .no_msp34xx = 1, 994 .pll = PLL_28, 995 .tuner_type = TUNER_PHILIPS_PAL_I, 996 .tuner_addr = ADDR_UNSET, 997 }, 998 [BTTV_BOARD_ONAIR_TV] = { 999 .name = "Little OnAir TV", 1000 .video_inputs = 3, 1001 /* .audio_inputs= 1, */ 1002 .svhs = 2, 1003 .gpiomask = 0xe00b, 1004 .muxsel = MUXSEL(2, 3, 1, 1), 1005 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 1006 .gpiomute = 0xff3ffc, 1007 .no_msp34xx = 1, 1008 .tuner_type = UNSET, 1009 .tuner_addr = ADDR_UNSET, 1010 }, 1011 1012 /* ---- card 0x2c ---------------------------------- */ 1013 [BTTV_BOARD_SIGMA_TVII_FM] = { 1014 .name = "Sigma TVII-FM", 1015 .video_inputs = 2, 1016 /* .audio_inputs= 1, */ 1017 .svhs = NO_SVHS, 1018 .gpiomask = 3, 1019 .muxsel = MUXSEL(2, 3, 1, 1), 1020 .gpiomux = { 1, 1, 0, 2 }, 1021 .gpiomute = 3, 1022 .no_msp34xx = 1, 1023 .pll = PLL_NONE, 1024 .tuner_type = UNSET, 1025 .tuner_addr = ADDR_UNSET, 1026 }, 1027 [BTTV_BOARD_MATRIX_VISION2] = { 1028 .name = "MATRIX-Vision MV-Delta 2", 1029 .video_inputs = 5, 1030 /* .audio_inputs= 1, */ 1031 .svhs = 3, 1032 .gpiomask = 0, 1033 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1034 .gpiomux = { 0 }, 1035 .no_msp34xx = 1, 1036 .pll = PLL_28, 1037 .tuner_type = TUNER_ABSENT, 1038 .tuner_addr = ADDR_UNSET, 1039 }, 1040 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1041 .name = "Zoltrix Genie TV/FM", 1042 .video_inputs = 3, 1043 /* .audio_inputs= 1, */ 1044 .svhs = 2, 1045 .gpiomask = 0xbcf03f, 1046 .muxsel = MUXSEL(2, 3, 1, 1), 1047 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1048 .gpiomute = 0xbcb03f, 1049 .no_msp34xx = 1, 1050 .pll = PLL_28, 1051 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1052 .tuner_addr = ADDR_UNSET, 1053 }, 1054 [BTTV_BOARD_TERRATVRADIO] = { 1055 .name = "Terratec TV/Radio+", 1056 .video_inputs = 3, 1057 /* .audio_inputs= 1, */ 1058 .svhs = 2, 1059 .gpiomask = 0x70000, 1060 .muxsel = MUXSEL(2, 3, 1, 1), 1061 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1062 .gpiomute = 0x40000, 1063 .needs_tvaudio = 1, 1064 .no_msp34xx = 1, 1065 .pll = PLL_35, 1066 .tuner_type = TUNER_PHILIPS_PAL_I, 1067 .tuner_addr = ADDR_UNSET, 1068 .has_radio = 1, 1069 }, 1070 1071 /* ---- card 0x30 ---------------------------------- */ 1072 [BTTV_BOARD_DYNALINK] = { 1073 .name = "Askey CPH03x/ Dynalink Magic TView", 1074 .video_inputs = 3, 1075 /* .audio_inputs= 1, */ 1076 .svhs = 2, 1077 .gpiomask = 15, 1078 .muxsel = MUXSEL(2, 3, 1, 1), 1079 .gpiomux = {2,0,0,0 }, 1080 .gpiomute = 1, 1081 .needs_tvaudio = 1, 1082 .pll = PLL_28, 1083 .tuner_type = UNSET, 1084 .tuner_addr = ADDR_UNSET, 1085 }, 1086 [BTTV_BOARD_GVBCTV3PCI] = { 1087 .name = "IODATA GV-BCTV3/PCI", 1088 .video_inputs = 3, 1089 /* .audio_inputs= 1, */ 1090 .svhs = 2, 1091 .gpiomask = 0x010f00, 1092 .muxsel = MUXSEL(2, 3, 0, 0), 1093 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1094 .no_msp34xx = 1, 1095 .pll = PLL_28, 1096 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1097 .tuner_addr = ADDR_UNSET, 1098 .audio_mode_gpio= gvbctv3pci_audio, 1099 }, 1100 [BTTV_BOARD_PXELVWPLTVPAK] = { 1101 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1102 .video_inputs = 5, 1103 /* .audio_inputs= 1, */ 1104 .svhs = 3, 1105 .has_dig_in = 1, 1106 .gpiomask = 0xAA0000, 1107 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1108 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1109 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1110 .gpiomute = 0xa8000, 1111 .no_msp34xx = 1, 1112 .pll = PLL_28, 1113 .tuner_type = TUNER_PHILIPS_PAL_I, 1114 .tuner_addr = ADDR_UNSET, 1115 .has_remote = 1, 1116 /* GPIO wiring: (different from Rev.4C !) 1117 GPIO17: U4.A0 (first hef4052bt) 1118 GPIO19: U4.A1 1119 GPIO20: U5.A1 (second hef4052bt) 1120 GPIO21: U4.nEN 1121 GPIO22: BT832 Reset Line 1122 GPIO23: A5,A0, U5,nEN 1123 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1124 */ 1125 }, 1126 [BTTV_BOARD_EAGLE] = { 1127 .name = "Eagle Wireless Capricorn2 (bt878A)", 1128 .video_inputs = 4, 1129 /* .audio_inputs= 1, */ 1130 .svhs = 2, 1131 .gpiomask = 7, 1132 .muxsel = MUXSEL(2, 0, 1, 1), 1133 .gpiomux = { 0, 1, 2, 3 }, 1134 .gpiomute = 4, 1135 .pll = PLL_28, 1136 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1137 .tuner_addr = ADDR_UNSET, 1138 }, 1139 1140 /* ---- card 0x34 ---------------------------------- */ 1141 [BTTV_BOARD_PINNACLEPRO] = { 1142 /* David H��rdeman <david@2gen.com> */ 1143 .name = "Pinnacle PCTV Studio Pro", 1144 .video_inputs = 4, 1145 /* .audio_inputs= 1, */ 1146 .svhs = 3, 1147 .gpiomask = 0x03000F, 1148 .muxsel = MUXSEL(2, 3, 1, 1), 1149 .gpiomux = { 1, 0xd0001, 0, 0 }, 1150 .gpiomute = 10, 1151 /* sound path (5 sources): 1152 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1153 0= ext. Audio IN 1154 1= from MUX2 1155 2= Mono TV sound from Tuner 1156 3= not connected 1157 MUX2 (mask 0x30000): 1158 0,2,3= from MSP34xx 1159 1= FM stereo Radio from Tuner */ 1160 .needs_tvaudio = 0, 1161 .pll = PLL_28, 1162 .tuner_type = UNSET, 1163 .tuner_addr = ADDR_UNSET, 1164 }, 1165 [BTTV_BOARD_TVIEW_RDS_FM] = { 1166 /* Claas Langbehn <claas@bigfoot.com>, 1167 Sven Grothklags <sven@upb.de> */ 1168 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1169 .video_inputs = 4, 1170 /* .audio_inputs= 3, */ 1171 .svhs = 2, 1172 .gpiomask = 0x1c, 1173 .muxsel = MUXSEL(2, 3, 1, 1), 1174 .gpiomux = { 0, 0, 0x10, 8 }, 1175 .gpiomute = 4, 1176 .needs_tvaudio = 1, 1177 .pll = PLL_28, 1178 .tuner_type = TUNER_PHILIPS_PAL, 1179 .tuner_addr = ADDR_UNSET, 1180 .has_radio = 1, 1181 }, 1182 [BTTV_BOARD_LIFETEC_9415] = { 1183 /* Tim R��stermundt <rosterm@uni-muenster.de> 1184 in de.comp.os.unix.linux.hardware: 1185 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1186 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1187 options tuner type=5 */ 1188 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1189 .video_inputs = 4, 1190 /* .audio_inputs= 1, */ 1191 .svhs = 2, 1192 .gpiomask = 0x18e0, 1193 .muxsel = MUXSEL(2, 3, 1, 1), 1194 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1195 .gpiomute = 0x18e0, 1196 /* For cards with tda9820/tda9821: 1197 0x0000: Tuner normal stereo 1198 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1199 0x0880: Tuner A2 stereo */ 1200 .pll = PLL_28, 1201 .tuner_type = UNSET, 1202 .tuner_addr = ADDR_UNSET, 1203 }, 1204 [BTTV_BOARD_BESTBUY_EASYTV] = { 1205 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1206 old Easy TV BT848 version (model CPH031) */ 1207 .name = "Askey CPH031/ BESTBUY Easy TV", 1208 .video_inputs = 4, 1209 /* .audio_inputs= 1, */ 1210 .svhs = 2, 1211 .gpiomask = 0xF, 1212 .muxsel = MUXSEL(2, 3, 1, 0), 1213 .gpiomux = { 2, 0, 0, 0 }, 1214 .gpiomute = 10, 1215 .needs_tvaudio = 0, 1216 .pll = PLL_28, 1217 .tuner_type = TUNER_TEMIC_PAL, 1218 .tuner_addr = ADDR_UNSET, 1219 }, 1220 1221 /* ---- card 0x38 ---------------------------------- */ 1222 [BTTV_BOARD_FLYVIDEO_98FM] = { 1223 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1224 .name = "Lifeview FlyVideo 98FM LR50", 1225 .video_inputs = 4, 1226 /* .audio_inputs= 3, */ 1227 .svhs = 2, 1228 .gpiomask = 0x1800, 1229 .muxsel = MUXSEL(2, 3, 1, 1), 1230 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1231 .gpiomute = 0x1800, 1232 .pll = PLL_28, 1233 .tuner_type = TUNER_PHILIPS_PAL, 1234 .tuner_addr = ADDR_UNSET, 1235 }, 1236 /* This is the ultimate cheapo capture card 1237 * just a BT848A on a small PCB! 1238 * Steve Hosgood <steve@equiinet.com> */ 1239 [BTTV_BOARD_GRANDTEC] = { 1240 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1241 .video_inputs = 2, 1242 /* .audio_inputs= 0, */ 1243 .svhs = 1, 1244 .gpiomask = 0, 1245 .muxsel = MUXSEL(3, 1), 1246 .gpiomux = { 0 }, 1247 .needs_tvaudio = 0, 1248 .no_msp34xx = 1, 1249 .pll = PLL_35, 1250 .tuner_type = TUNER_ABSENT, 1251 .tuner_addr = ADDR_UNSET, 1252 }, 1253 [BTTV_BOARD_ASKEY_CPH060] = { 1254 /* Daniel Herrington <daniel.herrington@home.com> */ 1255 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1256 .video_inputs = 3, 1257 /* .audio_inputs= 1, */ 1258 .svhs = 2, 1259 .gpiomask = 0xe00, 1260 .muxsel = MUXSEL(2, 3, 1, 1), 1261 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1262 .gpiomute = 0x800, 1263 .needs_tvaudio = 1, 1264 .pll = PLL_28, 1265 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1266 .tuner_addr = ADDR_UNSET, 1267 }, 1268 [BTTV_BOARD_ASKEY_CPH03X] = { 1269 /* Matti Mottus <mottus@physic.ut.ee> */ 1270 .name = "Askey CPH03x TV Capturer", 1271 .video_inputs = 4, 1272 /* .audio_inputs= 1, */ 1273 .svhs = 2, 1274 .gpiomask = 0x03000F, 1275 .muxsel = MUXSEL(2, 3, 1, 0), 1276 .gpiomux = { 2, 0, 0, 0 }, 1277 .gpiomute = 1, 1278 .pll = PLL_28, 1279 .tuner_type = TUNER_TEMIC_PAL, 1280 .tuner_addr = ADDR_UNSET, 1281 .has_remote = 1, 1282 }, 1283 1284 /* ---- card 0x3c ---------------------------------- */ 1285 [BTTV_BOARD_MM100PCTV] = { 1286 /* Philip Blundell <philb@gnu.org> */ 1287 .name = "Modular Technology MM100PCTV", 1288 .video_inputs = 2, 1289 /* .audio_inputs= 2, */ 1290 .svhs = NO_SVHS, 1291 .gpiomask = 11, 1292 .muxsel = MUXSEL(2, 3, 1, 1), 1293 .gpiomux = { 2, 0, 0, 1 }, 1294 .gpiomute = 8, 1295 .pll = PLL_35, 1296 .tuner_type = TUNER_TEMIC_PAL, 1297 .tuner_addr = ADDR_UNSET, 1298 }, 1299 [BTTV_BOARD_GMV1] = { 1300 /* Adrian Cox <adrian@humboldt.co.uk */ 1301 .name = "AG Electronics GMV1", 1302 .video_inputs = 2, 1303 /* .audio_inputs= 0, */ 1304 .svhs = 1, 1305 .gpiomask = 0xF, 1306 .muxsel = MUXSEL(2, 2), 1307 .gpiomux = { }, 1308 .no_msp34xx = 1, 1309 .needs_tvaudio = 0, 1310 .pll = PLL_28, 1311 .tuner_type = TUNER_ABSENT, 1312 .tuner_addr = ADDR_UNSET, 1313 }, 1314 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1315 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1316 new Easy TV BT878 version (model CPH061) 1317 special thanks to Informatica Mieres for providing the card */ 1318 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1319 .video_inputs = 3, 1320 /* .audio_inputs= 2, */ 1321 .svhs = 2, 1322 .gpiomask = 0xFF, 1323 .muxsel = MUXSEL(2, 3, 1, 0), 1324 .gpiomux = { 1, 0, 4, 4 }, 1325 .gpiomute = 9, 1326 .needs_tvaudio = 0, 1327 .pll = PLL_28, 1328 .tuner_type = TUNER_PHILIPS_PAL, 1329 .tuner_addr = ADDR_UNSET, 1330 }, 1331 [BTTV_BOARD_ATI_TVWONDER] = { 1332 /* Lukas Gebauer <geby@volny.cz> */ 1333 .name = "ATI TV-Wonder", 1334 .video_inputs = 3, 1335 /* .audio_inputs= 1, */ 1336 .svhs = 2, 1337 .gpiomask = 0xf03f, 1338 .muxsel = MUXSEL(2, 3, 1, 0), 1339 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1340 .gpiomute = 0xbffe, 1341 .pll = PLL_28, 1342 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1343 .tuner_addr = ADDR_UNSET, 1344 }, 1345 1346 /* ---- card 0x40 ---------------------------------- */ 1347 [BTTV_BOARD_ATI_TVWONDERVE] = { 1348 /* Lukas Gebauer <geby@volny.cz> */ 1349 .name = "ATI TV-Wonder VE", 1350 .video_inputs = 2, 1351 /* .audio_inputs= 1, */ 1352 .svhs = NO_SVHS, 1353 .gpiomask = 1, 1354 .muxsel = MUXSEL(2, 3, 0, 1), 1355 .gpiomux = { 0, 0, 1, 0 }, 1356 .no_msp34xx = 1, 1357 .pll = PLL_28, 1358 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1359 .tuner_addr = ADDR_UNSET, 1360 }, 1361 [BTTV_BOARD_FLYVIDEO2000] = { 1362 /* DeeJay <deejay@westel900.net (2000S) */ 1363 .name = "Lifeview FlyVideo 2000S LR90", 1364 .video_inputs = 3, 1365 /* .audio_inputs= 3, */ 1366 .svhs = 2, 1367 .gpiomask = 0x18e0, 1368 .muxsel = MUXSEL(2, 3, 0, 1), 1369 /* Radio changed from 1e80 to 0x800 to make 1370 FlyVideo2000S in .hu happy (gm)*/ 1371 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1372 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1373 .gpiomute = 0x1800, 1374 .audio_mode_gpio= fv2000s_audio, 1375 .no_msp34xx = 1, 1376 .no_tda9875 = 1, 1377 .needs_tvaudio = 1, 1378 .pll = PLL_28, 1379 .tuner_type = TUNER_PHILIPS_PAL, 1380 .tuner_addr = ADDR_UNSET, 1381 }, 1382 [BTTV_BOARD_TERRATVALUER] = { 1383 .name = "Terratec TValueRadio", 1384 .video_inputs = 3, 1385 /* .audio_inputs= 1, */ 1386 .svhs = 2, 1387 .gpiomask = 0xffff00, 1388 .muxsel = MUXSEL(2, 3, 1, 1), 1389 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1390 .gpiomute = 0x900, 1391 .needs_tvaudio = 1, 1392 .pll = PLL_28, 1393 .tuner_type = TUNER_PHILIPS_PAL, 1394 .tuner_addr = ADDR_UNSET, 1395 .has_radio = 1, 1396 }, 1397 [BTTV_BOARD_GVBCTV4PCI] = { 1398 /* TANAKA Kei <peg00625@nifty.com> */ 1399 .name = "IODATA GV-BCTV4/PCI", 1400 .video_inputs = 3, 1401 /* .audio_inputs= 1, */ 1402 .svhs = 2, 1403 .gpiomask = 0x010f00, 1404 .muxsel = MUXSEL(2, 3, 0, 0), 1405 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1406 .no_msp34xx = 1, 1407 .pll = PLL_28, 1408 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1409 .tuner_addr = ADDR_UNSET, 1410 .audio_mode_gpio= gvbctv3pci_audio, 1411 }, 1412 1413 /* ---- card 0x44 ---------------------------------- */ 1414 [BTTV_BOARD_VOODOOTV_FM] = { 1415 .name = "3Dfx VoodooTV FM (Euro)", 1416 /* try "insmod msp3400 simple=0" if you have 1417 * sound problems with this card. */ 1418 .video_inputs = 4, 1419 /* .audio_inputs= 1, */ 1420 .svhs = NO_SVHS, 1421 .gpiomask = 0x4f8a00, 1422 /* 0x100000: 1=MSP enabled (0=disable again) 1423 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1424 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1425 .gpiomute = 0x947fff, 1426 /* tvtuner, radio, external,internal, mute, stereo 1427 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1428 .muxsel = MUXSEL(2, 3, 0, 1), 1429 .tuner_type = TUNER_MT2032, 1430 .tuner_addr = ADDR_UNSET, 1431 .pll = PLL_28, 1432 .has_radio = 1, 1433 }, 1434 [BTTV_BOARD_VOODOOTV_200] = { 1435 .name = "VoodooTV 200 (USA)", 1436 /* try "insmod msp3400 simple=0" if you have 1437 * sound problems with this card. */ 1438 .video_inputs = 4, 1439 /* .audio_inputs= 1, */ 1440 .svhs = NO_SVHS, 1441 .gpiomask = 0x4f8a00, 1442 /* 0x100000: 1=MSP enabled (0=disable again) 1443 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1444 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1445 .gpiomute = 0x947fff, 1446 /* tvtuner, radio, external,internal, mute, stereo 1447 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1448 .muxsel = MUXSEL(2, 3, 0, 1), 1449 .tuner_type = TUNER_MT2032, 1450 .tuner_addr = ADDR_UNSET, 1451 .pll = PLL_28, 1452 .has_radio = 1, 1453 }, 1454 [BTTV_BOARD_AIMMS] = { 1455 /* Philip Blundell <pb@nexus.co.uk> */ 1456 .name = "Active Imaging AIMMS", 1457 .video_inputs = 1, 1458 /* .audio_inputs= 0, */ 1459 .tuner_type = TUNER_ABSENT, 1460 .tuner_addr = ADDR_UNSET, 1461 .pll = PLL_28, 1462 .muxsel = MUXSEL(2), 1463 .gpiomask = 0 1464 }, 1465 [BTTV_BOARD_PV_BT878P_PLUS] = { 1466 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1467 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1468 .video_inputs = 3, 1469 /* .audio_inputs= 4, */ 1470 .svhs = 2, 1471 .gpiomask = 15, 1472 .muxsel = MUXSEL(2, 3, 1, 1), 1473 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1474 .gpiomute = 13, 1475 .needs_tvaudio = 1, 1476 .pll = PLL_28, 1477 .tuner_type = TUNER_LG_PAL_I_FM, 1478 .tuner_addr = ADDR_UNSET, 1479 .has_remote = 1, 1480 /* GPIO wiring: 1481 GPIO0: U4.A0 (hef4052bt) 1482 GPIO1: U4.A1 1483 GPIO2: U4.A1 (second hef4052bt) 1484 GPIO3: U4.nEN, U5.A0, A5.nEN 1485 GPIO8-15: vrd866b ? 1486 */ 1487 }, 1488 [BTTV_BOARD_FLYVIDEO98EZ] = { 1489 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1490 .video_inputs = 4, 1491 /* .audio_inputs= 0, */ 1492 .svhs = 2, 1493 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1494 .muxsel = MUXSEL(2, 3, 1, 1), 1495 .pll = PLL_28, 1496 .no_msp34xx = 1, 1497 .tuner_type = TUNER_ABSENT, 1498 .tuner_addr = ADDR_UNSET, 1499 }, 1500 1501 /* ---- card 0x48 ---------------------------------- */ 1502 [BTTV_BOARD_PV_BT878P_9B] = { 1503 /* Dariusz Kowalewski <darekk@automex.pl> */ 1504 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1505 .video_inputs = 4, 1506 /* .audio_inputs= 1, */ 1507 .svhs = 2, 1508 .gpiomask = 0x3f, 1509 .muxsel = MUXSEL(2, 3, 1, 1), 1510 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1511 .gpiomute = 0x09, 1512 .needs_tvaudio = 1, 1513 .no_msp34xx = 1, 1514 .no_tda9875 = 1, 1515 .pll = PLL_28, 1516 .tuner_type = TUNER_PHILIPS_PAL, 1517 .tuner_addr = ADDR_UNSET, 1518 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1519 .has_radio = 1, /* Note: not all cards have radio */ 1520 .has_remote = 1, 1521 /* GPIO wiring: 1522 GPIO0: A0 hef4052 1523 GPIO1: A1 hef4052 1524 GPIO3: nEN hef4052 1525 GPIO8-15: vrd866b 1526 GPIO20,22,23: R30,R29,R28 1527 */ 1528 }, 1529 [BTTV_BOARD_SENSORAY311] = { 1530 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1531 /* you must jumper JP5 for the card to work */ 1532 .name = "Sensoray 311", 1533 .video_inputs = 5, 1534 /* .audio_inputs= 0, */ 1535 .svhs = 4, 1536 .gpiomask = 0, 1537 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1538 .gpiomux = { 0 }, 1539 .needs_tvaudio = 0, 1540 .tuner_type = TUNER_ABSENT, 1541 .tuner_addr = ADDR_UNSET, 1542 }, 1543 [BTTV_BOARD_RV605] = { 1544 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1545 .name = "RemoteVision MX (RV605)", 1546 .video_inputs = 16, 1547 /* .audio_inputs= 0, */ 1548 .svhs = NO_SVHS, 1549 .gpiomask = 0x00, 1550 .gpiomask2 = 0x07ff, 1551 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1552 .no_msp34xx = 1, 1553 .no_tda9875 = 1, 1554 .tuner_type = TUNER_ABSENT, 1555 .tuner_addr = ADDR_UNSET, 1556 .muxsel_hook = rv605_muxsel, 1557 }, 1558 [BTTV_BOARD_POWERCLR_MTV878] = { 1559 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1560 .video_inputs = 3, 1561 /* .audio_inputs= 2, */ 1562 .svhs = 2, 1563 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1564 .muxsel = MUXSEL(2, 1, 1), 1565 .gpiomux = { 0, 1, 2, 2 }, 1566 .gpiomute = 4, 1567 .needs_tvaudio = 0, 1568 .tuner_type = TUNER_PHILIPS_PAL, 1569 .tuner_addr = ADDR_UNSET, 1570 .pll = PLL_28, 1571 .has_radio = 1, 1572 }, 1573 1574 /* ---- card 0x4c ---------------------------------- */ 1575 [BTTV_BOARD_WINDVR] = { 1576 /* Masaki Suzuki <masaki@btree.org> */ 1577 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1578 .video_inputs = 3, 1579 /* .audio_inputs= 1, */ 1580 .svhs = 2, 1581 .gpiomask = 0x140007, 1582 .muxsel = MUXSEL(2, 3, 1, 1), 1583 .gpiomux = { 0, 1, 2, 3 }, 1584 .gpiomute = 4, 1585 .tuner_type = TUNER_PHILIPS_NTSC, 1586 .tuner_addr = ADDR_UNSET, 1587 .audio_mode_gpio= windvr_audio, 1588 }, 1589 [BTTV_BOARD_GRANDTEC_MULTI] = { 1590 .name = "GrandTec Multi Capture Card (Bt878)", 1591 .video_inputs = 4, 1592 /* .audio_inputs= 0, */ 1593 .svhs = NO_SVHS, 1594 .gpiomask = 0, 1595 .muxsel = MUXSEL(2, 3, 1, 0), 1596 .gpiomux = { 0 }, 1597 .needs_tvaudio = 0, 1598 .no_msp34xx = 1, 1599 .pll = PLL_28, 1600 .tuner_type = TUNER_ABSENT, 1601 .tuner_addr = ADDR_UNSET, 1602 }, 1603 [BTTV_BOARD_KWORLD] = { 1604 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1605 .video_inputs = 4, 1606 /* .audio_inputs= 3, */ 1607 .svhs = 2, 1608 .gpiomask = 7, 1609 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1610 .muxsel = MUXSEL(2, 3, 1, 1), 1611 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1612 * This card lacks external Audio In, so we mute it on Ext. & Int. 1613 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1614 * This card lacks PCI subsystem ID, sigh. 1615 * gpiomux =1: lower volume, 2+3: mute 1616 * btwincap uses 0x80000/0x80003 1617 */ 1618 .gpiomute = 4, 1619 .needs_tvaudio = 0, 1620 .no_msp34xx = 1, 1621 .pll = PLL_28, 1622 .tuner_type = TUNER_PHILIPS_PAL, 1623 .tuner_addr = ADDR_UNSET, 1624 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1625 radio signal strength indicators work fine. */ 1626 .has_radio = 1, 1627 /* GPIO Info: 1628 GPIO0,1: HEF4052 A0,A1 1629 GPIO2: HEF4052 nENABLE 1630 GPIO3-7: n.c. 1631 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1632 GPIO14,15: ?? 1633 GPIO16-21: n.c. 1634 GPIO22,23: ?? 1635 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1636 }, 1637 [BTTV_BOARD_DSP_TCVIDEO] = { 1638 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1639 .name = "DSP Design TCVIDEO", 1640 .video_inputs = 4, 1641 .svhs = NO_SVHS, 1642 .muxsel = MUXSEL(2, 3, 1, 0), 1643 .pll = PLL_28, 1644 .tuner_type = UNSET, 1645 .tuner_addr = ADDR_UNSET, 1646 }, 1647 1648 /* ---- card 0x50 ---------------------------------- */ 1649 [BTTV_BOARD_HAUPPAUGEPVR] = { 1650 .name = "Hauppauge WinTV PVR", 1651 .video_inputs = 4, 1652 /* .audio_inputs= 1, */ 1653 .svhs = 2, 1654 .muxsel = MUXSEL(2, 0, 1, 1), 1655 .needs_tvaudio = 1, 1656 .pll = PLL_28, 1657 .tuner_type = UNSET, 1658 .tuner_addr = ADDR_UNSET, 1659 1660 .gpiomask = 7, 1661 .gpiomux = {7}, 1662 }, 1663 [BTTV_BOARD_GVBCTV5PCI] = { 1664 .name = "IODATA GV-BCTV5/PCI", 1665 .video_inputs = 3, 1666 /* .audio_inputs= 1, */ 1667 .svhs = 2, 1668 .gpiomask = 0x0f0f80, 1669 .muxsel = MUXSEL(2, 3, 1, 0), 1670 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1671 .gpiomute = 0x020000, 1672 .no_msp34xx = 1, 1673 .pll = PLL_28, 1674 .tuner_type = TUNER_PHILIPS_NTSC_M, 1675 .tuner_addr = ADDR_UNSET, 1676 .audio_mode_gpio= gvbctv5pci_audio, 1677 .has_radio = 1, 1678 }, 1679 [BTTV_BOARD_OSPREY1x0] = { 1680 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1681 .video_inputs = 4, /* id-inputs-clock */ 1682 /* .audio_inputs= 0, */ 1683 .svhs = 3, 1684 .muxsel = MUXSEL(3, 2, 0, 1), 1685 .pll = PLL_28, 1686 .tuner_type = TUNER_ABSENT, 1687 .tuner_addr = ADDR_UNSET, 1688 .no_msp34xx = 1, 1689 .no_tda9875 = 1, 1690 .no_tda7432 = 1, 1691 }, 1692 [BTTV_BOARD_OSPREY1x0_848] = { 1693 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1694 .video_inputs = 3, 1695 /* .audio_inputs= 0, */ 1696 .svhs = 2, 1697 .muxsel = MUXSEL(2, 3, 1), 1698 .pll = PLL_28, 1699 .tuner_type = TUNER_ABSENT, 1700 .tuner_addr = ADDR_UNSET, 1701 .no_msp34xx = 1, 1702 .no_tda9875 = 1, 1703 .no_tda7432 = 1, 1704 }, 1705 1706 /* ---- card 0x54 ---------------------------------- */ 1707 [BTTV_BOARD_OSPREY101_848] = { 1708 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1709 .video_inputs = 2, 1710 /* .audio_inputs= 0, */ 1711 .svhs = 1, 1712 .muxsel = MUXSEL(3, 1), 1713 .pll = PLL_28, 1714 .tuner_type = TUNER_ABSENT, 1715 .tuner_addr = ADDR_UNSET, 1716 .no_msp34xx = 1, 1717 .no_tda9875 = 1, 1718 .no_tda7432 = 1, 1719 }, 1720 [BTTV_BOARD_OSPREY1x1] = { 1721 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1722 .video_inputs = 1, 1723 /* .audio_inputs= 0, */ 1724 .svhs = NO_SVHS, 1725 .muxsel = MUXSEL(0), 1726 .pll = PLL_28, 1727 .tuner_type = TUNER_ABSENT, 1728 .tuner_addr = ADDR_UNSET, 1729 .no_msp34xx = 1, 1730 .no_tda9875 = 1, 1731 .no_tda7432 = 1, 1732 }, 1733 [BTTV_BOARD_OSPREY1x1_SVID] = { 1734 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1735 .video_inputs = 2, 1736 /* .audio_inputs= 0, */ 1737 .svhs = 1, 1738 .muxsel = MUXSEL(0, 1), 1739 .pll = PLL_28, 1740 .tuner_type = TUNER_ABSENT, 1741 .tuner_addr = ADDR_UNSET, 1742 .no_msp34xx = 1, 1743 .no_tda9875 = 1, 1744 .no_tda7432 = 1, 1745 }, 1746 [BTTV_BOARD_OSPREY2xx] = { 1747 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1748 .video_inputs = 1, 1749 /* .audio_inputs= 1, */ 1750 .svhs = NO_SVHS, 1751 .muxsel = MUXSEL(0), 1752 .pll = PLL_28, 1753 .tuner_type = TUNER_ABSENT, 1754 .tuner_addr = ADDR_UNSET, 1755 .no_msp34xx = 1, 1756 .no_tda9875 = 1, 1757 .no_tda7432 = 1, 1758 }, 1759 1760 /* ---- card 0x58 ---------------------------------- */ 1761 [BTTV_BOARD_OSPREY2x0_SVID] = { 1762 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1763 .video_inputs = 2, 1764 /* .audio_inputs= 1, */ 1765 .svhs = 1, 1766 .muxsel = MUXSEL(0, 1), 1767 .pll = PLL_28, 1768 .tuner_type = TUNER_ABSENT, 1769 .tuner_addr = ADDR_UNSET, 1770 .no_msp34xx = 1, 1771 .no_tda9875 = 1, 1772 .no_tda7432 = 1, 1773 }, 1774 [BTTV_BOARD_OSPREY2x0] = { 1775 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1776 .video_inputs = 2, 1777 /* .audio_inputs= 1, */ 1778 .svhs = 1, 1779 .muxsel = MUXSEL(2, 3), 1780 .pll = PLL_28, 1781 .tuner_type = TUNER_ABSENT, 1782 .tuner_addr = ADDR_UNSET, 1783 .no_msp34xx = 1, 1784 .no_tda9875 = 1, 1785 .no_tda7432 = 1, 1786 }, 1787 [BTTV_BOARD_OSPREY500] = { 1788 .name = "Osprey 500", /* 500 */ 1789 .video_inputs = 2, 1790 /* .audio_inputs= 1, */ 1791 .svhs = 1, 1792 .muxsel = MUXSEL(2, 3), 1793 .pll = PLL_28, 1794 .tuner_type = TUNER_ABSENT, 1795 .tuner_addr = ADDR_UNSET, 1796 .no_msp34xx = 1, 1797 .no_tda9875 = 1, 1798 .no_tda7432 = 1, 1799 }, 1800 [BTTV_BOARD_OSPREY540] = { 1801 .name = "Osprey 540", /* 540 */ 1802 .video_inputs = 4, 1803 /* .audio_inputs= 1, */ 1804 .pll = PLL_28, 1805 .tuner_type = TUNER_ABSENT, 1806 .tuner_addr = ADDR_UNSET, 1807 .no_msp34xx = 1, 1808 .no_tda9875 = 1, 1809 .no_tda7432 = 1, 1810 }, 1811 1812 /* ---- card 0x5C ---------------------------------- */ 1813 [BTTV_BOARD_OSPREY2000] = { 1814 .name = "Osprey 2000", /* 2000 */ 1815 .video_inputs = 2, 1816 /* .audio_inputs= 1, */ 1817 .svhs = 1, 1818 .muxsel = MUXSEL(2, 3), 1819 .pll = PLL_28, 1820 .tuner_type = TUNER_ABSENT, 1821 .tuner_addr = ADDR_UNSET, 1822 .no_msp34xx = 1, 1823 .no_tda9875 = 1, 1824 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1825 }, 1826 [BTTV_BOARD_IDS_EAGLE] = { 1827 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1828 .name = "IDS Eagle", 1829 .video_inputs = 4, 1830 /* .audio_inputs= 0, */ 1831 .tuner_type = TUNER_ABSENT, 1832 .tuner_addr = ADDR_UNSET, 1833 .svhs = NO_SVHS, 1834 .gpiomask = 0, 1835 .muxsel = MUXSEL(2, 2, 2, 2), 1836 .muxsel_hook = eagle_muxsel, 1837 .no_msp34xx = 1, 1838 .no_tda9875 = 1, 1839 .pll = PLL_28, 1840 }, 1841 [BTTV_BOARD_PINNACLESAT] = { 1842 .name = "Pinnacle PCTV Sat", 1843 .video_inputs = 2, 1844 /* .audio_inputs= 0, */ 1845 .svhs = 1, 1846 .tuner_type = TUNER_ABSENT, 1847 .tuner_addr = ADDR_UNSET, 1848 .no_msp34xx = 1, 1849 .no_tda9875 = 1, 1850 .no_tda7432 = 1, 1851 .muxsel = MUXSEL(3, 1), 1852 .pll = PLL_28, 1853 .no_gpioirq = 1, 1854 .has_dvb = 1, 1855 }, 1856 [BTTV_BOARD_FORMAC_PROTV] = { 1857 .name = "Formac ProTV II (bt878)", 1858 .video_inputs = 4, 1859 /* .audio_inputs= 1, */ 1860 .svhs = 3, 1861 .gpiomask = 2, 1862 /* TV, Comp1, Composite over SVID con, SVID */ 1863 .muxsel = MUXSEL(2, 3, 1, 1), 1864 .gpiomux = { 2, 2, 0, 0 }, 1865 .pll = PLL_28, 1866 .has_radio = 1, 1867 .tuner_type = TUNER_PHILIPS_PAL, 1868 .tuner_addr = ADDR_UNSET, 1869 /* sound routing: 1870 GPIO=0x00,0x01,0x03: mute (?) 1871 0x02: both TV and radio (tuner: FM1216/I) 1872 The card has onboard audio connectors labeled "cdrom" and "board", 1873 not soldered here, though unknown wiring. 1874 Card lacks: external audio in, pci subsystem id. 1875 */ 1876 }, 1877 1878 /* ---- card 0x60 ---------------------------------- */ 1879 [BTTV_BOARD_MACHTV] = { 1880 .name = "MachTV", 1881 .video_inputs = 3, 1882 /* .audio_inputs= 1, */ 1883 .svhs = NO_SVHS, 1884 .gpiomask = 7, 1885 .muxsel = MUXSEL(2, 3, 1, 1), 1886 .gpiomux = { 0, 1, 2, 3}, 1887 .gpiomute = 4, 1888 .needs_tvaudio = 1, 1889 .tuner_type = TUNER_PHILIPS_PAL, 1890 .tuner_addr = ADDR_UNSET, 1891 .pll = PLL_28, 1892 }, 1893 [BTTV_BOARD_EURESYS_PICOLO] = { 1894 .name = "Euresys Picolo", 1895 .video_inputs = 3, 1896 /* .audio_inputs= 0, */ 1897 .svhs = 2, 1898 .gpiomask = 0, 1899 .no_msp34xx = 1, 1900 .no_tda9875 = 1, 1901 .no_tda7432 = 1, 1902 .muxsel = MUXSEL(2, 0, 1), 1903 .pll = PLL_28, 1904 .tuner_type = TUNER_ABSENT, 1905 .tuner_addr = ADDR_UNSET, 1906 }, 1907 [BTTV_BOARD_PV150] = { 1908 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1909 .name = "ProVideo PV150", /* 0x4f */ 1910 .video_inputs = 2, 1911 /* .audio_inputs= 0, */ 1912 .svhs = NO_SVHS, 1913 .gpiomask = 0, 1914 .muxsel = MUXSEL(2, 3), 1915 .gpiomux = { 0 }, 1916 .needs_tvaudio = 0, 1917 .no_msp34xx = 1, 1918 .pll = PLL_28, 1919 .tuner_type = TUNER_ABSENT, 1920 .tuner_addr = ADDR_UNSET, 1921 }, 1922 [BTTV_BOARD_AD_TVK503] = { 1923 /* Hiroshi Takekawa <sian@big.or.jp> */ 1924 /* This card lacks subsystem ID */ 1925 .name = "AD-TVK503", /* 0x63 */ 1926 .video_inputs = 4, 1927 /* .audio_inputs= 1, */ 1928 .svhs = 2, 1929 .gpiomask = 0x001e8007, 1930 .muxsel = MUXSEL(2, 3, 1, 0), 1931 /* Tuner, Radio, external, internal, off, on */ 1932 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1933 .gpiomute = 0x0f, 1934 .needs_tvaudio = 0, 1935 .no_msp34xx = 1, 1936 .pll = PLL_28, 1937 .tuner_type = TUNER_PHILIPS_NTSC, 1938 .tuner_addr = ADDR_UNSET, 1939 .audio_mode_gpio= adtvk503_audio, 1940 }, 1941 1942 /* ---- card 0x64 ---------------------------------- */ 1943 [BTTV_BOARD_HERCULES_SM_TV] = { 1944 .name = "Hercules Smart TV Stereo", 1945 .video_inputs = 4, 1946 /* .audio_inputs= 1, */ 1947 .svhs = 2, 1948 .gpiomask = 0x00, 1949 .muxsel = MUXSEL(2, 3, 1, 1), 1950 .needs_tvaudio = 1, 1951 .no_msp34xx = 1, 1952 .pll = PLL_28, 1953 .tuner_type = TUNER_PHILIPS_PAL, 1954 .tuner_addr = ADDR_UNSET, 1955 /* Notes: 1956 - card lacks subsystem ID 1957 - stereo variant w/ daughter board with tda9874a @0xb0 1958 - Audio Routing: 1959 always from tda9874 independent of GPIO (?) 1960 external line in: unknown 1961 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1962 hef4053 (instead 4052) for unknown function 1963 */ 1964 }, 1965 [BTTV_BOARD_PACETV] = { 1966 .name = "Pace TV & Radio Card", 1967 .video_inputs = 4, 1968 /* .audio_inputs= 1, */ 1969 .svhs = 2, 1970 /* Tuner, CVid, SVid, CVid over SVid connector */ 1971 .muxsel = MUXSEL(2, 3, 1, 1), 1972 .gpiomask = 0, 1973 .no_tda9875 = 1, 1974 .no_tda7432 = 1, 1975 .tuner_type = TUNER_PHILIPS_PAL_I, 1976 .tuner_addr = ADDR_UNSET, 1977 .has_radio = 1, 1978 .pll = PLL_28, 1979 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1980 only internal line out: (4pin header) RGGL 1981 Radio must be decoded by msp3410d (not routed through)*/ 1982 /* 1983 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1984 */ 1985 }, 1986 [BTTV_BOARD_IVC200] = { 1987 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1988 .name = "IVC-200", 1989 .video_inputs = 1, 1990 /* .audio_inputs= 0, */ 1991 .tuner_type = TUNER_ABSENT, 1992 .tuner_addr = ADDR_UNSET, 1993 .svhs = NO_SVHS, 1994 .gpiomask = 0xdf, 1995 .muxsel = MUXSEL(2), 1996 .pll = PLL_28, 1997 }, 1998 [BTTV_BOARD_IVCE8784] = { 1999 .name = "IVCE-8784", 2000 .video_inputs = 1, 2001 /* .audio_inputs= 0, */ 2002 .tuner_type = TUNER_ABSENT, 2003 .tuner_addr = ADDR_UNSET, 2004 .svhs = NO_SVHS, 2005 .gpiomask = 0xdf, 2006 .muxsel = MUXSEL(2), 2007 .pll = PLL_28, 2008 }, 2009 [BTTV_BOARD_XGUARD] = { 2010 .name = "Grand X-Guard / Trust 814PCI", 2011 .video_inputs = 16, 2012 /* .audio_inputs= 0, */ 2013 .svhs = NO_SVHS, 2014 .tuner_type = TUNER_ABSENT, 2015 .tuner_addr = ADDR_UNSET, 2016 .gpiomask2 = 0xff, 2017 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 2018 .muxsel_hook = xguard_muxsel, 2019 .no_msp34xx = 1, 2020 .no_tda9875 = 1, 2021 .no_tda7432 = 1, 2022 .pll = PLL_28, 2023 }, 2024 2025 /* ---- card 0x68 ---------------------------------- */ 2026 [BTTV_BOARD_NEBULA_DIGITV] = { 2027 .name = "Nebula Electronics DigiTV", 2028 .video_inputs = 1, 2029 .svhs = NO_SVHS, 2030 .muxsel = MUXSEL(2, 3, 1, 0), 2031 .no_msp34xx = 1, 2032 .no_tda9875 = 1, 2033 .no_tda7432 = 1, 2034 .pll = PLL_28, 2035 .tuner_type = TUNER_ABSENT, 2036 .tuner_addr = ADDR_UNSET, 2037 .has_dvb = 1, 2038 .has_remote = 1, 2039 .gpiomask = 0x1b, 2040 .no_gpioirq = 1, 2041 }, 2042 [BTTV_BOARD_PV143] = { 2043 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 2044 .name = "ProVideo PV143", 2045 .video_inputs = 4, 2046 /* .audio_inputs= 0, */ 2047 .svhs = NO_SVHS, 2048 .gpiomask = 0, 2049 .muxsel = MUXSEL(2, 3, 1, 0), 2050 .gpiomux = { 0 }, 2051 .needs_tvaudio = 0, 2052 .no_msp34xx = 1, 2053 .pll = PLL_28, 2054 .tuner_type = TUNER_ABSENT, 2055 .tuner_addr = ADDR_UNSET, 2056 }, 2057 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 2058 /* M.Klahr@phytec.de */ 2059 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 2060 .video_inputs = 4, 2061 /* .audio_inputs= 0, */ 2062 .svhs = 3, 2063 .gpiomask = 0x00, 2064 .muxsel = MUXSEL(2, 3, 1, 0), 2065 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2066 .needs_tvaudio = 0, 2067 .pll = PLL_28, 2068 .tuner_type = TUNER_ABSENT, 2069 .tuner_addr = ADDR_UNSET, 2070 }, 2071 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 2072 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 2073 .video_inputs = 4, 2074 /* .audio_inputs= 0, */ 2075 .svhs = 3, 2076 .gpiomask = 0x00, 2077 .muxsel = MUXSEL(2, 3, 1, 1), 2078 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2079 .needs_tvaudio = 0, 2080 .pll = PLL_28, 2081 .tuner_type = TUNER_ABSENT, 2082 .tuner_addr = ADDR_UNSET, 2083 }, 2084 2085 /* ---- card 0x6c ---------------------------------- */ 2086 [BTTV_BOARD_VD009_MINIDIN] = { 2087 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2088 .video_inputs = 10, 2089 /* .audio_inputs= 0, */ 2090 .svhs = 9, 2091 .gpiomask = 0x00, 2092 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2093 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2094 .muxsel_hook = phytec_muxsel, 2095 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2096 .needs_tvaudio = 1, 2097 .pll = PLL_28, 2098 .tuner_type = TUNER_ABSENT, 2099 .tuner_addr = ADDR_UNSET, 2100 }, 2101 [BTTV_BOARD_VD009_COMBI] = { 2102 .name = "PHYTEC VD-009 Combi (bt878)", 2103 .video_inputs = 10, 2104 /* .audio_inputs= 0, */ 2105 .svhs = 9, 2106 .gpiomask = 0x00, 2107 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2108 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2109 .muxsel_hook = phytec_muxsel, 2110 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2111 .needs_tvaudio = 1, 2112 .pll = PLL_28, 2113 .tuner_type = TUNER_ABSENT, 2114 .tuner_addr = ADDR_UNSET, 2115 }, 2116 [BTTV_BOARD_IVC100] = { 2117 .name = "IVC-100", 2118 .video_inputs = 4, 2119 /* .audio_inputs= 0, */ 2120 .tuner_type = TUNER_ABSENT, 2121 .tuner_addr = ADDR_UNSET, 2122 .svhs = NO_SVHS, 2123 .gpiomask = 0xdf, 2124 .muxsel = MUXSEL(2, 3, 1, 0), 2125 .pll = PLL_28, 2126 }, 2127 [BTTV_BOARD_IVC120] = { 2128 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2129 .name = "IVC-120G", 2130 .video_inputs = 16, 2131 /* .audio_inputs= 0, */ 2132 .tuner_type = TUNER_ABSENT, 2133 .tuner_addr = ADDR_UNSET, 2134 .svhs = NO_SVHS, /* card has no svhs */ 2135 .needs_tvaudio = 0, 2136 .no_msp34xx = 1, 2137 .no_tda9875 = 1, 2138 .no_tda7432 = 1, 2139 .gpiomask = 0x00, 2140 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2141 .muxsel_hook = ivc120_muxsel, 2142 .pll = PLL_28, 2143 }, 2144 2145 /* ---- card 0x70 ---------------------------------- */ 2146 [BTTV_BOARD_PC_HDTV] = { 2147 .name = "pcHDTV HD-2000 TV", 2148 .video_inputs = 4, 2149 /* .audio_inputs= 1, */ 2150 .svhs = 2, 2151 .muxsel = MUXSEL(2, 3, 1, 0), 2152 .tuner_type = TUNER_PHILIPS_FCV1236D, 2153 .tuner_addr = ADDR_UNSET, 2154 .has_dvb = 1, 2155 }, 2156 [BTTV_BOARD_TWINHAN_DST] = { 2157 .name = "Twinhan DST + clones", 2158 .no_msp34xx = 1, 2159 .no_tda9875 = 1, 2160 .no_tda7432 = 1, 2161 .tuner_type = TUNER_ABSENT, 2162 .tuner_addr = ADDR_UNSET, 2163 .no_video = 1, 2164 .has_dvb = 1, 2165 }, 2166 [BTTV_BOARD_WINFASTVC100] = { 2167 .name = "Winfast VC100", 2168 .video_inputs = 3, 2169 /* .audio_inputs= 0, */ 2170 .svhs = 1, 2171 /* Vid In, SVid In, Vid over SVid in connector */ 2172 .muxsel = MUXSEL(3, 1, 1, 3), 2173 .no_msp34xx = 1, 2174 .no_tda9875 = 1, 2175 .no_tda7432 = 1, 2176 .tuner_type = TUNER_ABSENT, 2177 .tuner_addr = ADDR_UNSET, 2178 .pll = PLL_28, 2179 }, 2180 [BTTV_BOARD_TEV560] = { 2181 .name = "Teppro TEV-560/InterVision IV-560", 2182 .video_inputs = 3, 2183 /* .audio_inputs= 1, */ 2184 .svhs = 2, 2185 .gpiomask = 3, 2186 .muxsel = MUXSEL(2, 3, 1, 1), 2187 .gpiomux = { 1, 1, 1, 1 }, 2188 .needs_tvaudio = 1, 2189 .tuner_type = TUNER_PHILIPS_PAL, 2190 .tuner_addr = ADDR_UNSET, 2191 .pll = PLL_35, 2192 }, 2193 2194 /* ---- card 0x74 ---------------------------------- */ 2195 [BTTV_BOARD_SIMUS_GVC1100] = { 2196 .name = "SIMUS GVC1100", 2197 .video_inputs = 4, 2198 /* .audio_inputs= 0, */ 2199 .svhs = NO_SVHS, 2200 .tuner_type = TUNER_ABSENT, 2201 .tuner_addr = ADDR_UNSET, 2202 .pll = PLL_28, 2203 .muxsel = MUXSEL(2, 2, 2, 2), 2204 .gpiomask = 0x3F, 2205 .muxsel_hook = gvc1100_muxsel, 2206 }, 2207 [BTTV_BOARD_NGSTV_PLUS] = { 2208 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2209 .name = "NGS NGSTV+", 2210 .video_inputs = 3, 2211 .svhs = 2, 2212 .gpiomask = 0x008007, 2213 .muxsel = MUXSEL(2, 3, 0, 0), 2214 .gpiomux = { 0, 0, 0, 0 }, 2215 .gpiomute = 0x000003, 2216 .pll = PLL_28, 2217 .tuner_type = TUNER_PHILIPS_PAL, 2218 .tuner_addr = ADDR_UNSET, 2219 .has_remote = 1, 2220 }, 2221 [BTTV_BOARD_LMLBT4] = { 2222 /* http://linuxmedialabs.com */ 2223 .name = "LMLBT4", 2224 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2225 /* .audio_inputs= 0, */ 2226 .svhs = NO_SVHS, 2227 .muxsel = MUXSEL(2, 3, 1, 0), 2228 .no_msp34xx = 1, 2229 .no_tda9875 = 1, 2230 .no_tda7432 = 1, 2231 .needs_tvaudio = 0, 2232 .tuner_type = TUNER_ABSENT, 2233 .tuner_addr = ADDR_UNSET, 2234 }, 2235 [BTTV_BOARD_TEKRAM_M205] = { 2236 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2237 .name = "Tekram M205 PRO", 2238 .video_inputs = 3, 2239 /* .audio_inputs= 1, */ 2240 .tuner_type = TUNER_PHILIPS_PAL, 2241 .tuner_addr = ADDR_UNSET, 2242 .svhs = 2, 2243 .needs_tvaudio = 0, 2244 .gpiomask = 0x68, 2245 .muxsel = MUXSEL(2, 3, 1), 2246 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2247 .pll = PLL_28, 2248 }, 2249 2250 /* ---- card 0x78 ---------------------------------- */ 2251 [BTTV_BOARD_CONTVFMI] = { 2252 /* Javier Cendan Ares <jcendan@lycos.es> */ 2253 /* bt878 TV + FM without subsystem ID */ 2254 .name = "Conceptronic CONTVFMi", 2255 .video_inputs = 3, 2256 /* .audio_inputs= 1, */ 2257 .svhs = 2, 2258 .gpiomask = 0x008007, 2259 .muxsel = MUXSEL(2, 3, 1, 1), 2260 .gpiomux = { 0, 1, 2, 2 }, 2261 .gpiomute = 3, 2262 .needs_tvaudio = 0, 2263 .pll = PLL_28, 2264 .tuner_type = TUNER_PHILIPS_PAL, 2265 .tuner_addr = ADDR_UNSET, 2266 .has_remote = 1, 2267 .has_radio = 1, 2268 }, 2269 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2270 /*Eric DEBIEF <debief@telemsa.com>*/ 2271 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ 2272 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ 2273 /*0x79 in bttv.h*/ 2274 .name = "Euresys Picolo Tetra", 2275 .video_inputs = 4, 2276 /* .audio_inputs= 0, */ 2277 .svhs = NO_SVHS, 2278 .gpiomask = 0, 2279 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2280 .no_msp34xx = 1, 2281 .no_tda9875 = 1, 2282 .no_tda7432 = 1, 2283 /*878A input is always MUX0, see above.*/ 2284 .muxsel = MUXSEL(2, 2, 2, 2), 2285 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2286 .pll = PLL_28, 2287 .needs_tvaudio = 0, 2288 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2289 .tuner_type = TUNER_ABSENT, 2290 .tuner_addr = ADDR_UNSET, 2291 }, 2292 [BTTV_BOARD_SPIRIT_TV] = { 2293 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2294 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2295 .name = "Spirit TV Tuner", 2296 .video_inputs = 3, 2297 /* .audio_inputs= 1, */ 2298 .svhs = 2, 2299 .gpiomask = 0x0000000f, 2300 .muxsel = MUXSEL(2, 1, 1), 2301 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2302 .tuner_type = TUNER_TEMIC_PAL, 2303 .tuner_addr = ADDR_UNSET, 2304 .no_msp34xx = 1, 2305 .no_tda9875 = 1, 2306 }, 2307 [BTTV_BOARD_AVDVBT_771] = { 2308 /* Wolfram Joost <wojo@frokaschwei.de> */ 2309 .name = "AVerMedia AVerTV DVB-T 771", 2310 .video_inputs = 2, 2311 .svhs = 1, 2312 .tuner_type = TUNER_ABSENT, 2313 .tuner_addr = ADDR_UNSET, 2314 .muxsel = MUXSEL(3, 3), 2315 .no_msp34xx = 1, 2316 .no_tda9875 = 1, 2317 .no_tda7432 = 1, 2318 .pll = PLL_28, 2319 .has_dvb = 1, 2320 .no_gpioirq = 1, 2321 .has_remote = 1, 2322 }, 2323 /* ---- card 0x7c ---------------------------------- */ 2324 [BTTV_BOARD_AVDVBT_761] = { 2325 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2326 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2327 .name = "AverMedia AverTV DVB-T 761", 2328 .video_inputs = 2, 2329 .svhs = 1, 2330 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2331 .no_msp34xx = 1, 2332 .no_tda9875 = 1, 2333 .no_tda7432 = 1, 2334 .pll = PLL_28, 2335 .tuner_type = TUNER_ABSENT, 2336 .tuner_addr = ADDR_UNSET, 2337 .has_dvb = 1, 2338 .no_gpioirq = 1, 2339 .has_remote = 1, 2340 }, 2341 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2342 /* andre.schwarz@matrix-vision.de */ 2343 .name = "MATRIX Vision Sigma-SQ", 2344 .video_inputs = 16, 2345 /* .audio_inputs= 0, */ 2346 .svhs = NO_SVHS, 2347 .gpiomask = 0x0, 2348 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2349 .muxsel_hook = sigmaSQ_muxsel, 2350 .gpiomux = { 0 }, 2351 .no_msp34xx = 1, 2352 .pll = PLL_28, 2353 .tuner_type = TUNER_ABSENT, 2354 .tuner_addr = ADDR_UNSET, 2355 }, 2356 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2357 /* andre.schwarz@matrix-vision.de */ 2358 .name = "MATRIX Vision Sigma-SLC", 2359 .video_inputs = 4, 2360 /* .audio_inputs= 0, */ 2361 .svhs = NO_SVHS, 2362 .gpiomask = 0x0, 2363 .muxsel = MUXSEL(2, 2, 2, 2), 2364 .muxsel_hook = sigmaSLC_muxsel, 2365 .gpiomux = { 0 }, 2366 .no_msp34xx = 1, 2367 .pll = PLL_28, 2368 .tuner_type = TUNER_ABSENT, 2369 .tuner_addr = ADDR_UNSET, 2370 }, 2371 /* BTTV_BOARD_APAC_VIEWCOMP */ 2372 [BTTV_BOARD_APAC_VIEWCOMP] = { 2373 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2374 /* bt878 TV + FM 0x00000000 subsystem ID */ 2375 .name = "APAC Viewcomp 878(AMAX)", 2376 .video_inputs = 2, 2377 /* .audio_inputs= 1, */ 2378 .svhs = NO_SVHS, 2379 .gpiomask = 0xFF, 2380 .muxsel = MUXSEL(2, 3, 1, 1), 2381 .gpiomux = { 2, 0, 0, 0 }, 2382 .gpiomute = 10, 2383 .needs_tvaudio = 0, 2384 .pll = PLL_28, 2385 .tuner_type = TUNER_PHILIPS_PAL, 2386 .tuner_addr = ADDR_UNSET, 2387 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2388 .has_radio = 1, /* not every card has radio */ 2389 }, 2390 2391 /* ---- card 0x80 ---------------------------------- */ 2392 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2393 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2394 .name = "DViCO FusionHDTV DVB-T Lite", 2395 .no_msp34xx = 1, 2396 .no_tda9875 = 1, 2397 .no_tda7432 = 1, 2398 .pll = PLL_28, 2399 .no_video = 1, 2400 .has_dvb = 1, 2401 .tuner_type = TUNER_ABSENT, 2402 .tuner_addr = ADDR_UNSET, 2403 }, 2404 [BTTV_BOARD_VGEAR_MYVCD] = { 2405 /* Steven <photon38@pchome.com.tw> */ 2406 .name = "V-Gear MyVCD", 2407 .video_inputs = 3, 2408 /* .audio_inputs= 1, */ 2409 .svhs = 2, 2410 .gpiomask = 0x3f, 2411 .muxsel = MUXSEL(2, 3, 1, 0), 2412 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2413 .gpiomute = 0x31, 2414 .no_msp34xx = 1, 2415 .pll = PLL_28, 2416 .tuner_type = TUNER_PHILIPS_NTSC_M, 2417 .tuner_addr = ADDR_UNSET, 2418 .has_radio = 0, 2419 }, 2420 [BTTV_BOARD_SUPER_TV] = { 2421 /* Rick C <cryptdragoon@gmail.com> */ 2422 .name = "Super TV Tuner", 2423 .video_inputs = 4, 2424 /* .audio_inputs= 1, */ 2425 .svhs = 2, 2426 .muxsel = MUXSEL(2, 3, 1, 0), 2427 .tuner_type = TUNER_PHILIPS_NTSC, 2428 .tuner_addr = ADDR_UNSET, 2429 .gpiomask = 0x008007, 2430 .gpiomux = { 0, 0x000001,0,0 }, 2431 .needs_tvaudio = 1, 2432 .has_radio = 1, 2433 }, 2434 [BTTV_BOARD_TIBET_CS16] = { 2435 /* Chris Fanning <video4linux@haydon.net> */ 2436 .name = "Tibet Systems 'Progress DVR' CS16", 2437 .video_inputs = 16, 2438 /* .audio_inputs= 0, */ 2439 .svhs = NO_SVHS, 2440 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2441 .pll = PLL_28, 2442 .no_msp34xx = 1, 2443 .no_tda9875 = 1, 2444 .no_tda7432 = 1, 2445 .tuner_type = TUNER_ABSENT, 2446 .tuner_addr = ADDR_UNSET, 2447 .muxsel_hook = tibetCS16_muxsel, 2448 }, 2449 [BTTV_BOARD_KODICOM_4400R] = { 2450 /* Bill Brack <wbrack@mmm.com.hk> */ 2451 /* 2452 * Note that, because of the card's wiring, the "master" 2453 * BT878A chip (i.e. the one which controls the analog switch 2454 * and must use this card type) is the 2nd one detected. The 2455 * other 3 chips should use card type 0x85, whose description 2456 * follows this one. There is a EEPROM on the card (which is 2457 * connected to the I2C of one of those other chips), but is 2458 * not currently handled. There is also a facility for a 2459 * "monitor", which is also not currently implemented. 2460 */ 2461 .name = "Kodicom 4400R (master)", 2462 .video_inputs = 16, 2463 /* .audio_inputs= 0, */ 2464 .tuner_type = TUNER_ABSENT, 2465 .tuner_addr = ADDR_UNSET, 2466 .svhs = NO_SVHS, 2467 /* GPIO bits 0-9 used for analog switch: 2468 * 00 - 03: camera selector 2469 * 04 - 06: channel (controller) selector 2470 * 07: data (1->on, 0->off) 2471 * 08: strobe 2472 * 09: reset 2473 * bit 16 is input from sync separator for the channel 2474 */ 2475 .gpiomask = 0x0003ff, 2476 .no_gpioirq = 1, 2477 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2478 .pll = PLL_28, 2479 .no_msp34xx = 1, 2480 .no_tda7432 = 1, 2481 .no_tda9875 = 1, 2482 .muxsel_hook = kodicom4400r_muxsel, 2483 }, 2484 [BTTV_BOARD_KODICOM_4400R_SL] = { 2485 /* Bill Brack <wbrack@mmm.com.hk> */ 2486 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2487 * one which controls the analog switch, and must use the card type) 2488 * is the 2nd one detected. The other 3 chips should use this card 2489 * type 2490 */ 2491 .name = "Kodicom 4400R (slave)", 2492 .video_inputs = 16, 2493 /* .audio_inputs= 0, */ 2494 .tuner_type = TUNER_ABSENT, 2495 .tuner_addr = ADDR_UNSET, 2496 .svhs = NO_SVHS, 2497 .gpiomask = 0x010000, 2498 .no_gpioirq = 1, 2499 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2500 .pll = PLL_28, 2501 .no_msp34xx = 1, 2502 .no_tda7432 = 1, 2503 .no_tda9875 = 1, 2504 .muxsel_hook = kodicom4400r_muxsel, 2505 }, 2506 /* ---- card 0x86---------------------------------- */ 2507 [BTTV_BOARD_ADLINK_RTV24] = { 2508 /* Michael Henson <mhenson@clarityvi.com> */ 2509 /* Adlink RTV24 with special unlock codes */ 2510 .name = "Adlink RTV24", 2511 .video_inputs = 4, 2512 /* .audio_inputs= 1, */ 2513 .svhs = 2, 2514 .muxsel = MUXSEL(2, 3, 1, 0), 2515 .tuner_type = UNSET, 2516 .tuner_addr = ADDR_UNSET, 2517 .pll = PLL_28, 2518 }, 2519 /* ---- card 0x87---------------------------------- */ 2520 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2521 /* Michael Krufky <mkrufky@m1k.net> */ 2522 .name = "DViCO FusionHDTV 5 Lite", 2523 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2524 .tuner_addr = ADDR_UNSET, 2525 .video_inputs = 3, 2526 /* .audio_inputs= 1, */ 2527 .svhs = 2, 2528 .muxsel = MUXSEL(2, 3, 1), 2529 .gpiomask = 0x00e00007, 2530 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2531 .gpiomute = 0x00c00007, 2532 .no_msp34xx = 1, 2533 .no_tda9875 = 1, 2534 .no_tda7432 = 1, 2535 .has_dvb = 1, 2536 }, 2537 /* ---- card 0x88---------------------------------- */ 2538 [BTTV_BOARD_ACORP_Y878F] = { 2539 /* Mauro Carvalho Chehab <mchehab@infradead.org> */ 2540 .name = "Acorp Y878F", 2541 .video_inputs = 3, 2542 /* .audio_inputs= 1, */ 2543 .svhs = 2, 2544 .gpiomask = 0x01fe00, 2545 .muxsel = MUXSEL(2, 3, 1, 1), 2546 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2547 .gpiomute = 0x002000, 2548 .needs_tvaudio = 1, 2549 .pll = PLL_28, 2550 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2551 .tuner_addr = 0xc1 >>1, 2552 .has_radio = 1, 2553 }, 2554 /* ---- card 0x89 ---------------------------------- */ 2555 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2556 .name = "Conceptronic CTVFMi v2", 2557 .video_inputs = 3, 2558 /* .audio_inputs= 1, */ 2559 .svhs = 2, 2560 .gpiomask = 0x001c0007, 2561 .muxsel = MUXSEL(2, 3, 1, 1), 2562 .gpiomux = { 0, 1, 2, 2 }, 2563 .gpiomute = 3, 2564 .needs_tvaudio = 0, 2565 .pll = PLL_28, 2566 .tuner_type = TUNER_TENA_9533_DI, 2567 .tuner_addr = ADDR_UNSET, 2568 .has_remote = 1, 2569 .has_radio = 1, 2570 }, 2571 /* ---- card 0x8a ---------------------------------- */ 2572 [BTTV_BOARD_PV_BT878P_2E] = { 2573 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2574 .video_inputs = 5, 2575 /* .audio_inputs= 1, */ 2576 .svhs = 3, 2577 .has_dig_in = 1, 2578 .gpiomask = 0x01fe00, 2579 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2580 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2581 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2582 .gpiomute = 0x12400, 2583 .no_msp34xx = 1, 2584 .pll = PLL_28, 2585 .tuner_type = TUNER_LG_PAL_FM, 2586 .tuner_addr = ADDR_UNSET, 2587 .has_remote = 1, 2588 }, 2589 /* ---- card 0x8b ---------------------------------- */ 2590 [BTTV_BOARD_PV_M4900] = { 2591 /* S��rgio Fortier <sergiofortier@yahoo.com.br> */ 2592 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2593 .video_inputs = 3, 2594 /* .audio_inputs= 1, */ 2595 .svhs = 2, 2596 .gpiomask = 0x3f, 2597 .muxsel = MUXSEL(2, 3, 1, 1), 2598 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2599 .gpiomute = 0x29, 2600 .no_msp34xx = 1, 2601 .pll = PLL_28, 2602 .tuner_type = TUNER_YMEC_TVF_5533MF, 2603 .tuner_addr = ADDR_UNSET, 2604 .has_radio = 1, 2605 .has_remote = 1, 2606 }, 2607 /* ---- card 0x8c ---------------------------------- */ 2608 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2609 one external BNC composite input (mux 2) 2610 three internal composite inputs (unknown muxes) 2611 an 18-bit stereo A/D (CS5331A), which has: 2612 one external stereo unblanced (RCA) audio connection 2613 one (or 3?) internal stereo balanced (XLR) audio connection 2614 input is selected via gpio to a 14052B mux 2615 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2616 gain is controlled via an X9221A chip on the I2C bus @0x28 2617 sample rate is controlled via gpio to an MK1413S 2618 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2619 There is neither a tuner nor an svideo input. */ 2620 [BTTV_BOARD_OSPREY440] = { 2621 .name = "Osprey 440", 2622 .video_inputs = 4, 2623 /* .audio_inputs= 2, */ 2624 .svhs = NO_SVHS, 2625 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2626 .gpiomask = 0x303, 2627 .gpiomute = 0x000, /* int + 32kHz */ 2628 .gpiomux = { 0, 0, 0x000, 0x100}, 2629 .pll = PLL_28, 2630 .tuner_type = TUNER_ABSENT, 2631 .tuner_addr = ADDR_UNSET, 2632 .no_msp34xx = 1, 2633 .no_tda9875 = 1, 2634 .no_tda7432 = 1, 2635 }, 2636 /* ---- card 0x8d ---------------------------------- */ 2637 [BTTV_BOARD_ASOUND_SKYEYE] = { 2638 .name = "Asound Skyeye PCTV", 2639 .video_inputs = 3, 2640 /* .audio_inputs= 1, */ 2641 .svhs = 2, 2642 .gpiomask = 15, 2643 .muxsel = MUXSEL(2, 3, 1, 1), 2644 .gpiomux = { 2, 0, 0, 0 }, 2645 .gpiomute = 1, 2646 .needs_tvaudio = 1, 2647 .pll = PLL_28, 2648 .tuner_type = TUNER_PHILIPS_NTSC, 2649 .tuner_addr = ADDR_UNSET, 2650 }, 2651 /* ---- card 0x8e ---------------------------------- */ 2652 [BTTV_BOARD_SABRENT_TVFM] = { 2653 .name = "Sabrent TV-FM (bttv version)", 2654 .video_inputs = 3, 2655 /* .audio_inputs= 1, */ 2656 .svhs = 2, 2657 .gpiomask = 0x108007, 2658 .muxsel = MUXSEL(2, 3, 1, 1), 2659 .gpiomux = { 100000, 100002, 100002, 100000 }, 2660 .no_msp34xx = 1, 2661 .no_tda9875 = 1, 2662 .no_tda7432 = 1, 2663 .pll = PLL_28, 2664 .tuner_type = TUNER_TNF_5335MF, 2665 .tuner_addr = ADDR_UNSET, 2666 .has_radio = 1, 2667 }, 2668 /* ---- card 0x8f ---------------------------------- */ 2669 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2670 .name = "Hauppauge ImpactVCB (bt878)", 2671 .video_inputs = 4, 2672 /* .audio_inputs= 0, */ 2673 .svhs = NO_SVHS, 2674 .gpiomask = 0x0f, /* old: 7 */ 2675 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2676 .no_msp34xx = 1, 2677 .no_tda9875 = 1, 2678 .no_tda7432 = 1, 2679 .tuner_type = TUNER_ABSENT, 2680 .tuner_addr = ADDR_UNSET, 2681 }, 2682 [BTTV_BOARD_MACHTV_MAGICTV] = { 2683 2684 .name = "MagicTV", /* rebranded MachTV */ 2685 .video_inputs = 3, 2686 /* .audio_inputs= 1, */ 2687 .svhs = 2, 2688 .gpiomask = 7, 2689 .muxsel = MUXSEL(2, 3, 1, 1), 2690 .gpiomux = { 0, 1, 2, 3 }, 2691 .gpiomute = 4, 2692 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2693 .tuner_addr = ADDR_UNSET, 2694 .pll = PLL_28, 2695 .has_radio = 1, 2696 .has_remote = 1, 2697 }, 2698 [BTTV_BOARD_SSAI_SECURITY] = { 2699 .name = "SSAI Security Video Interface", 2700 .video_inputs = 4, 2701 /* .audio_inputs= 0, */ 2702 .svhs = NO_SVHS, 2703 .muxsel = MUXSEL(0, 1, 2, 3), 2704 .tuner_type = TUNER_ABSENT, 2705 .tuner_addr = ADDR_UNSET, 2706 }, 2707 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2708 .name = "SSAI Ultrasound Video Interface", 2709 .video_inputs = 2, 2710 /* .audio_inputs= 0, */ 2711 .svhs = 1, 2712 .muxsel = MUXSEL(2, 0, 1, 3), 2713 .tuner_type = TUNER_ABSENT, 2714 .tuner_addr = ADDR_UNSET, 2715 }, 2716 /* ---- card 0x94---------------------------------- */ 2717 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2718 .name = "DViCO FusionHDTV 2", 2719 .tuner_type = TUNER_PHILIPS_FCV1236D, 2720 .tuner_addr = ADDR_UNSET, 2721 .video_inputs = 3, 2722 /* .audio_inputs= 1, */ 2723 .svhs = 2, 2724 .muxsel = MUXSEL(2, 3, 1), 2725 .gpiomask = 0x00e00007, 2726 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2727 .gpiomute = 0x00c00007, 2728 .no_msp34xx = 1, 2729 .no_tda9875 = 1, 2730 .no_tda7432 = 1, 2731 }, 2732 /* ---- card 0x95---------------------------------- */ 2733 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2734 .name = "Typhoon TV-Tuner PCI (50684)", 2735 .video_inputs = 3, 2736 /* .audio_inputs= 1, */ 2737 .svhs = 2, 2738 .gpiomask = 0x3014f, 2739 .muxsel = MUXSEL(2, 3, 1, 1), 2740 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2741 .gpiomute = 10, 2742 .needs_tvaudio = 1, 2743 .pll = PLL_28, 2744 .tuner_type = TUNER_PHILIPS_PAL_I, 2745 .tuner_addr = ADDR_UNSET, 2746 }, 2747 [BTTV_BOARD_GEOVISION_GV600] = { 2748 /* emhn@usb.ve */ 2749 .name = "Geovision GV-600", 2750 .video_inputs = 16, 2751 /* .audio_inputs= 0, */ 2752 .svhs = NO_SVHS, 2753 .gpiomask = 0x0, 2754 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2755 .muxsel_hook = geovision_muxsel, 2756 .gpiomux = { 0 }, 2757 .no_msp34xx = 1, 2758 .pll = PLL_28, 2759 .tuner_type = TUNER_ABSENT, 2760 .tuner_addr = ADDR_UNSET, 2761 }, 2762 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2763 /* Mauro Lacy <mauro@lacy.com.ar> 2764 * Based on MagicTV and Conceptronic CONTVFMi */ 2765 2766 .name = "Kozumi KTV-01C", 2767 .video_inputs = 3, 2768 /* .audio_inputs= 1, */ 2769 .svhs = 2, 2770 .gpiomask = 0x008007, 2771 .muxsel = MUXSEL(2, 3, 1, 1), 2772 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2773 .gpiomute = 3, /* CONTVFMi */ 2774 .needs_tvaudio = 0, 2775 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2776 .tuner_addr = ADDR_UNSET, 2777 .pll = PLL_28, 2778 .has_radio = 1, 2779 .has_remote = 1, 2780 }, 2781 [BTTV_BOARD_ENLTV_FM_2] = { 2782 /* Encore TV Tuner Pro ENL TV-FM-2 2783 Mauro Carvalho Chehab <mchehab@infradead.org */ 2784 .name = "Encore ENL TV-FM-2", 2785 .video_inputs = 3, 2786 /* .audio_inputs= 1, */ 2787 .svhs = 2, 2788 /* bit 6 -> IR disabled 2789 bit 18/17 = 00 -> mute 2790 01 -> enable external audio input 2791 10 -> internal audio input (mono?) 2792 11 -> internal audio input 2793 */ 2794 .gpiomask = 0x060040, 2795 .muxsel = MUXSEL(2, 3, 3), 2796 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2797 .gpiomute = 0, 2798 .tuner_type = TUNER_TCL_MF02GIP_5N, 2799 .tuner_addr = ADDR_UNSET, 2800 .pll = PLL_28, 2801 .has_radio = 1, 2802 .has_remote = 1, 2803 }, 2804 [BTTV_BOARD_VD012] = { 2805 /* D.Heer@Phytec.de */ 2806 .name = "PHYTEC VD-012 (bt878)", 2807 .video_inputs = 4, 2808 /* .audio_inputs= 0, */ 2809 .svhs = NO_SVHS, 2810 .gpiomask = 0x00, 2811 .muxsel = MUXSEL(0, 2, 3, 1), 2812 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2813 .needs_tvaudio = 0, 2814 .pll = PLL_28, 2815 .tuner_type = TUNER_ABSENT, 2816 .tuner_addr = ADDR_UNSET, 2817 }, 2818 [BTTV_BOARD_VD012_X1] = { 2819 /* D.Heer@Phytec.de */ 2820 .name = "PHYTEC VD-012-X1 (bt878)", 2821 .video_inputs = 4, 2822 /* .audio_inputs= 0, */ 2823 .svhs = 3, 2824 .gpiomask = 0x00, 2825 .muxsel = MUXSEL(2, 3, 1), 2826 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2827 .needs_tvaudio = 0, 2828 .pll = PLL_28, 2829 .tuner_type = TUNER_ABSENT, 2830 .tuner_addr = ADDR_UNSET, 2831 }, 2832 [BTTV_BOARD_VD012_X2] = { 2833 /* D.Heer@Phytec.de */ 2834 .name = "PHYTEC VD-012-X2 (bt878)", 2835 .video_inputs = 4, 2836 /* .audio_inputs= 0, */ 2837 .svhs = 3, 2838 .gpiomask = 0x00, 2839 .muxsel = MUXSEL(3, 2, 1), 2840 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2841 .needs_tvaudio = 0, 2842 .pll = PLL_28, 2843 .tuner_type = TUNER_ABSENT, 2844 .tuner_addr = ADDR_UNSET, 2845 }, 2846 [BTTV_BOARD_GEOVISION_GV800S] = { 2847 /* Bruno Christo <bchristo@inf.ufsm.br> 2848 * 2849 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2850 * 1 audio input per BT878A = 4 audio inputs 2851 * 4 video inputs per BT878A = 16 video inputs 2852 * This is the first BT878A chip of the GV-800(S). It's the 2853 * "master" chip and it controls the video inputs through an 2854 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2855 * slaves should use card type 0x9e (following this one). 2856 * There is a EEPROM on the card which is currently not handled. 2857 * The audio input is not working yet. 2858 */ 2859 .name = "Geovision GV-800(S) (master)", 2860 .video_inputs = 4, 2861 /* .audio_inputs= 1, */ 2862 .tuner_type = TUNER_ABSENT, 2863 .tuner_addr = ADDR_UNSET, 2864 .svhs = NO_SVHS, 2865 .gpiomask = 0xf107f, 2866 .no_gpioirq = 1, 2867 .muxsel = MUXSEL(2, 2, 2, 2), 2868 .pll = PLL_28, 2869 .no_msp34xx = 1, 2870 .no_tda7432 = 1, 2871 .no_tda9875 = 1, 2872 .muxsel_hook = gv800s_muxsel, 2873 }, 2874 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2875 /* Bruno Christo <bchristo@inf.ufsm.br> 2876 * 2877 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2878 * 1 audio input per BT878A = 4 audio inputs 2879 * 4 video inputs per BT878A = 16 video inputs 2880 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2881 * and should use this card type. 2882 * The audio input is not working yet. 2883 */ 2884 .name = "Geovision GV-800(S) (slave)", 2885 .video_inputs = 4, 2886 /* .audio_inputs= 1, */ 2887 .tuner_type = TUNER_ABSENT, 2888 .tuner_addr = ADDR_UNSET, 2889 .svhs = NO_SVHS, 2890 .gpiomask = 0x00, 2891 .no_gpioirq = 1, 2892 .muxsel = MUXSEL(2, 2, 2, 2), 2893 .pll = PLL_28, 2894 .no_msp34xx = 1, 2895 .no_tda7432 = 1, 2896 .no_tda9875 = 1, 2897 .muxsel_hook = gv800s_muxsel, 2898 }, 2899 [BTTV_BOARD_PV183] = { 2900 .name = "ProVideo PV183", /* 0x9f */ 2901 .video_inputs = 2, 2902 /* .audio_inputs= 0, */ 2903 .svhs = NO_SVHS, 2904 .gpiomask = 0, 2905 .muxsel = MUXSEL(2, 3), 2906 .gpiomux = { 0 }, 2907 .needs_tvaudio = 0, 2908 .no_msp34xx = 1, 2909 .pll = PLL_28, 2910 .tuner_type = TUNER_ABSENT, 2911 .tuner_addr = ADDR_UNSET, 2912 }, 2913}; 2914 2915static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2916 2917/* ----------------------------------------------------------------------- */ 2918 2919static unsigned char eeprom_data[256]; 2920 2921/* 2922 * identify card 2923 */ 2924void __devinit bttv_idcard(struct bttv *btv) 2925{ 2926 unsigned int gpiobits; 2927 int i,type; 2928 unsigned short tmp; 2929 2930 /* read PCI subsystem ID */ 2931 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp); 2932 btv->cardid = tmp << 16; 2933 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp); 2934 btv->cardid |= tmp; 2935 2936 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2937 /* look for the card */ 2938 for (type = -1, i = 0; cards[i].id != 0; i++) 2939 if (cards[i].id == btv->cardid) 2940 type = i; 2941 2942 if (type != -1) { 2943 /* found it */ 2944 printk(KERN_INFO "bttv%d: detected: %s [card=%d], " 2945 "PCI subsystem ID is %04x:%04x\n", 2946 btv->c.nr,cards[type].name,cards[type].cardnr, 2947 btv->cardid & 0xffff, 2948 (btv->cardid >> 16) & 0xffff); 2949 btv->c.type = cards[type].cardnr; 2950 } else { 2951 /* 404 */ 2952 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n", 2953 btv->c.nr, btv->cardid & 0xffff, 2954 (btv->cardid >> 16) & 0xffff); 2955 printk(KERN_DEBUG "please mail id, board name and " 2956 "the correct card= insmod option to linux-media@vger.kernel.org\n"); 2957 } 2958 } 2959 2960 /* let the user override the autodetected type */ 2961 if (card[btv->c.nr] < bttv_num_tvcards) 2962 btv->c.type=card[btv->c.nr]; 2963 2964 /* print which card config we are using */ 2965 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr, 2966 bttv_tvcards[btv->c.type].name, btv->c.type, 2967 card[btv->c.nr] < bttv_num_tvcards 2968 ? "insmod option" : "autodetected"); 2969 2970 /* overwrite gpio stuff ?? */ 2971 if (UNSET == audioall && UNSET == audiomux[0]) 2972 return; 2973 2974 if (UNSET != audiomux[0]) { 2975 gpiobits = 0; 2976 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2977 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2978 gpiobits |= audiomux[i]; 2979 } 2980 } else { 2981 gpiobits = audioall; 2982 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2983 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2984 } 2985 } 2986 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2987 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", 2988 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask); 2989 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2990 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2991 } 2992 printk("\n"); 2993} 2994 2995/* 2996 * (most) board specific initialisations goes here 2997 */ 2998 2999/* Some Modular Technology cards have an eeprom, but no subsystem ID */ 3000static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 3001{ 3002 int type = -1; 3003 3004 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 3005 type = BTTV_BOARD_MODTEC_205; 3006 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 3007 type = BTTV_BOARD_EURESYS_PICOLO; 3008 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 3009 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 3010 3011 if (-1 != type) { 3012 btv->c.type = type; 3013 printk("bttv%d: detected by eeprom: %s [card=%d]\n", 3014 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 3015 } 3016} 3017 3018static void flyvideo_gpio(struct bttv *btv) 3019{ 3020 int gpio, has_remote, has_radio, is_capture_only; 3021 int is_lr90, has_tda9820_tda9821; 3022 int tuner_type = UNSET, ttype; 3023 3024 gpio_inout(0xffffff, 0); 3025 udelay(8); /* without this we would see the 0x1800 mask */ 3026 gpio = gpio_read(); 3027 3028 /* all cards provide GPIO info, some have an additional eeprom 3029 * LR50: GPIO coding can be found lower right CP1 .. CP9 3030 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 3031 * GPIO14-12: n.c. 3032 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 3033 3034 * lowest 3 bytes are remote control codes (no handshake needed) 3035 * xxxFFF: No remote control chip soldered 3036 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 3037 * Note: Some bits are Audio_Mask ! 3038 */ 3039 ttype = (gpio & 0x0f0000) >> 16; 3040 switch (ttype) { 3041 case 0x0: 3042 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 3043 break; 3044 case 0x2: 3045 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 3046 break; 3047 case 0x4: 3048 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 3049 break; 3050 case 0x6: 3051 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 3052 break; 3053 case 0xC: 3054 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 3055 break; 3056 default: 3057 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr); 3058 break; 3059 } 3060 3061 has_remote = gpio & 0x800000; 3062 has_radio = gpio & 0x400000; 3063 /* unknown 0x200000; 3064 * unknown2 0x100000; */ 3065 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 3066 has_tda9820_tda9821 = !(gpio & 0x004000); 3067 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 3068 /* 3069 * gpio & 0x001000 output bit for audio routing */ 3070 3071 if (is_capture_only) 3072 tuner_type = TUNER_ABSENT; /* No tuner present */ 3073 3074 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 3075 btv->c.nr, has_radio ? "yes" : "no ", 3076 has_remote ? "yes" : "no ", tuner_type, gpio); 3077 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 3078 btv->c.nr, is_lr90 ? "yes" : "no ", 3079 has_tda9820_tda9821 ? "yes" : "no ", 3080 is_capture_only ? "yes" : "no "); 3081 3082 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 3083 btv->tuner_type = tuner_type; 3084 btv->has_radio = has_radio; 3085 3086 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3087 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3088 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3089 if (has_tda9820_tda9821) 3090 btv->audio_mode_gpio = lt9415_audio; 3091 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3092} 3093 3094static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3095 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3096static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3097 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3098 3099static void miro_pinnacle_gpio(struct bttv *btv) 3100{ 3101 int id,msp,gpio; 3102 char *info; 3103 3104 gpio_inout(0xffffff, 0); 3105 gpio = gpio_read(); 3106 id = ((gpio>>10) & 63) -1; 3107 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3108 if (id < 32) { 3109 btv->tuner_type = miro_tunermap[id]; 3110 if (0 == (gpio & 0x20)) { 3111 btv->has_radio = 1; 3112 if (!miro_fmtuner[id]) { 3113 btv->has_matchbox = 1; 3114 btv->mbox_we = (1<<6); 3115 btv->mbox_most = (1<<7); 3116 btv->mbox_clk = (1<<8); 3117 btv->mbox_data = (1<<9); 3118 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); 3119 } 3120 } else { 3121 btv->has_radio = 0; 3122 } 3123 if (-1 != msp) { 3124 if (btv->c.type == BTTV_BOARD_MIRO) 3125 btv->c.type = BTTV_BOARD_MIROPRO; 3126 if (btv->c.type == BTTV_BOARD_PINNACLE) 3127 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3128 } 3129 printk(KERN_INFO 3130 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3131 btv->c.nr, id+1, btv->tuner_type, 3132 !btv->has_radio ? "no" : 3133 (btv->has_matchbox ? "matchbox" : "fmtuner"), 3134 (-1 == msp) ? "no" : "yes"); 3135 } else { 3136 /* new cards with microtune tuner */ 3137 id = 63 - id; 3138 btv->has_radio = 0; 3139 switch (id) { 3140 case 1: 3141 info = "PAL / mono"; 3142 btv->tda9887_conf = TDA9887_INTERCARRIER; 3143 break; 3144 case 2: 3145 info = "PAL+SECAM / stereo"; 3146 btv->has_radio = 1; 3147 btv->tda9887_conf = TDA9887_QSS; 3148 break; 3149 case 3: 3150 info = "NTSC / stereo"; 3151 btv->has_radio = 1; 3152 btv->tda9887_conf = TDA9887_QSS; 3153 break; 3154 case 4: 3155 info = "PAL+SECAM / mono"; 3156 btv->tda9887_conf = TDA9887_QSS; 3157 break; 3158 case 5: 3159 info = "NTSC / mono"; 3160 btv->tda9887_conf = TDA9887_INTERCARRIER; 3161 break; 3162 case 6: 3163 info = "NTSC / stereo"; 3164 btv->tda9887_conf = TDA9887_INTERCARRIER; 3165 break; 3166 case 7: 3167 info = "PAL / stereo"; 3168 btv->tda9887_conf = TDA9887_INTERCARRIER; 3169 break; 3170 default: 3171 info = "oops: unknown card"; 3172 break; 3173 } 3174 if (-1 != msp) 3175 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3176 printk(KERN_INFO 3177 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3178 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3179 btv->tuner_type = TUNER_MT2032; 3180 } 3181} 3182 3183/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3184#define LM1882_SYNC_DRIVE 0x200000L 3185 3186static void init_ids_eagle(struct bttv *btv) 3187{ 3188 gpio_inout(0xffffff,0xFFFF37); 3189 gpio_write(0x200020); 3190 3191 /* flash strobe inverter ?! */ 3192 gpio_write(0x200024); 3193 3194 /* switch sync drive off */ 3195 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3196 3197 /* set BT848 muxel to 2 */ 3198 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3199} 3200 3201/* Muxsel helper for the IDS Eagle. 3202 * the eagles does not use the standard muxsel-bits but 3203 * has its own multiplexer */ 3204static void eagle_muxsel(struct bttv *btv, unsigned int input) 3205{ 3206 gpio_bits(3, input & 3); 3207 3208 /* composite */ 3209 /* set chroma ADC to sleep */ 3210 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3211 /* set to composite video */ 3212 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3213 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3214 3215 /* switch sync drive off */ 3216 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3217} 3218 3219static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3220{ 3221 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3222 gpio_write(masks[input%4]); 3223} 3224 3225/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3226 alarms output 3227 3228 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3229 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3230 3231 IN - sensor inputs, INx - sensor inputs and TI XORed together 3232 O1,O2,O3 - alarm outputs (relays) 3233 3234 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3235 3236*/ 3237 3238static void init_lmlbt4x(struct bttv *btv) 3239{ 3240 printk(KERN_DEBUG "LMLBT4x init\n"); 3241 btwrite(0x000000, BT848_GPIO_REG_INP); 3242 gpio_inout(0xffffff, 0x0006C0); 3243 gpio_write(0x000000); 3244} 3245 3246static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3247{ 3248 unsigned int inmux = input % 8; 3249 gpio_inout( 0xf, 0xf ); 3250 gpio_bits( 0xf, inmux ); 3251} 3252 3253static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3254{ 3255 unsigned int inmux = input % 4; 3256 gpio_inout( 3<<9, 3<<9 ); 3257 gpio_bits( 3<<9, inmux<<9 ); 3258} 3259 3260static void geovision_muxsel(struct bttv *btv, unsigned int input) 3261{ 3262 unsigned int inmux = input % 16; 3263 gpio_inout(0xf, 0xf); 3264 gpio_bits(0xf, inmux); 3265} 3266 3267/* ----------------------------------------------------------------------- */ 3268 3269static void bttv_reset_audio(struct bttv *btv) 3270{ 3271 /* 3272 * BT878A has a audio-reset register. 3273 * 1. This register is an audio reset function but it is in 3274 * function-0 (video capture) address space. 3275 * 2. It is enough to do this once per power-up of the card. 3276 * 3. There is a typo in the Conexant doc -- it is not at 3277 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3278 * --//Shrikumar 030609 3279 */ 3280 if (btv->id != 878) 3281 return; 3282 3283 if (bttv_debug) 3284 printk("bttv%d: BT878A ARESET\n",btv->c.nr); 3285 btwrite((1<<7), 0x058); 3286 udelay(10); 3287 btwrite( 0, 0x058); 3288} 3289 3290/* initialization part one -- before registering i2c bus */ 3291void __devinit bttv_init_card1(struct bttv *btv) 3292{ 3293 switch (btv->c.type) { 3294 case BTTV_BOARD_HAUPPAUGE: 3295 case BTTV_BOARD_HAUPPAUGE878: 3296 boot_msp34xx(btv,5); 3297 break; 3298 case BTTV_BOARD_VOODOOTV_200: 3299 case BTTV_BOARD_VOODOOTV_FM: 3300 boot_msp34xx(btv,20); 3301 break; 3302 case BTTV_BOARD_AVERMEDIA98: 3303 boot_msp34xx(btv,11); 3304 break; 3305 case BTTV_BOARD_HAUPPAUGEPVR: 3306 pvr_boot(btv); 3307 break; 3308 case BTTV_BOARD_TWINHAN_DST: 3309 case BTTV_BOARD_AVDVBT_771: 3310 case BTTV_BOARD_PINNACLESAT: 3311 btv->use_i2c_hw = 1; 3312 break; 3313 case BTTV_BOARD_ADLINK_RTV24: 3314 init_RTV24( btv ); 3315 break; 3316 3317 } 3318 if (!bttv_tvcards[btv->c.type].has_dvb) 3319 bttv_reset_audio(btv); 3320} 3321 3322/* initialization part two -- after registering i2c bus */ 3323void __devinit bttv_init_card2(struct bttv *btv) 3324{ 3325 btv->tuner_type = UNSET; 3326 3327 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3328 bttv_readee(btv,eeprom_data,0xa0); 3329 identify_by_eeprom(btv,eeprom_data); 3330 } 3331 3332 switch (btv->c.type) { 3333 case BTTV_BOARD_MIRO: 3334 case BTTV_BOARD_MIROPRO: 3335 case BTTV_BOARD_PINNACLE: 3336 case BTTV_BOARD_PINNACLEPRO: 3337 /* miro/pinnacle */ 3338 miro_pinnacle_gpio(btv); 3339 break; 3340 case BTTV_BOARD_FLYVIDEO_98: 3341 case BTTV_BOARD_MAXI: 3342 case BTTV_BOARD_LIFE_FLYKIT: 3343 case BTTV_BOARD_FLYVIDEO: 3344 case BTTV_BOARD_TYPHOON_TVIEW: 3345 case BTTV_BOARD_CHRONOS_VS2: 3346 case BTTV_BOARD_FLYVIDEO_98FM: 3347 case BTTV_BOARD_FLYVIDEO2000: 3348 case BTTV_BOARD_FLYVIDEO98EZ: 3349 case BTTV_BOARD_CONFERENCETV: 3350 case BTTV_BOARD_LIFETEC_9415: 3351 flyvideo_gpio(btv); 3352 break; 3353 case BTTV_BOARD_HAUPPAUGE: 3354 case BTTV_BOARD_HAUPPAUGE878: 3355 case BTTV_BOARD_HAUPPAUGEPVR: 3356 /* pick up some config infos from the eeprom */ 3357 bttv_readee(btv,eeprom_data,0xa0); 3358 hauppauge_eeprom(btv); 3359 break; 3360 case BTTV_BOARD_AVERMEDIA98: 3361 case BTTV_BOARD_AVPHONE98: 3362 bttv_readee(btv,eeprom_data,0xa0); 3363 avermedia_eeprom(btv); 3364 break; 3365 case BTTV_BOARD_PXC200: 3366 init_PXC200(btv); 3367 break; 3368 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3369 picolo_tetra_init(btv); 3370 break; 3371 case BTTV_BOARD_VHX: 3372 btv->has_radio = 1; 3373 btv->has_matchbox = 1; 3374 btv->mbox_we = 0x20; 3375 btv->mbox_most = 0; 3376 btv->mbox_clk = 0x08; 3377 btv->mbox_data = 0x10; 3378 btv->mbox_mask = 0x38; 3379 break; 3380 case BTTV_BOARD_VOBIS_BOOSTAR: 3381 case BTTV_BOARD_TERRATV: 3382 terratec_active_radio_upgrade(btv); 3383 break; 3384 case BTTV_BOARD_MAGICTVIEW061: 3385 if (btv->cardid == 0x3002144f) { 3386 btv->has_radio=1; 3387 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr); 3388 } 3389 break; 3390 case BTTV_BOARD_STB2: 3391 if (btv->cardid == 0x3060121a) { 3392 /* Fix up entry for 3DFX VoodooTV 100, 3393 which is an OEM STB card variant. */ 3394 btv->has_radio=0; 3395 btv->tuner_type=TUNER_TEMIC_NTSC; 3396 } 3397 break; 3398 case BTTV_BOARD_OSPREY1x0: 3399 case BTTV_BOARD_OSPREY1x0_848: 3400 case BTTV_BOARD_OSPREY101_848: 3401 case BTTV_BOARD_OSPREY1x1: 3402 case BTTV_BOARD_OSPREY1x1_SVID: 3403 case BTTV_BOARD_OSPREY2xx: 3404 case BTTV_BOARD_OSPREY2x0_SVID: 3405 case BTTV_BOARD_OSPREY2x0: 3406 case BTTV_BOARD_OSPREY440: 3407 case BTTV_BOARD_OSPREY500: 3408 case BTTV_BOARD_OSPREY540: 3409 case BTTV_BOARD_OSPREY2000: 3410 bttv_readee(btv,eeprom_data,0xa0); 3411 osprey_eeprom(btv, eeprom_data); 3412 break; 3413 case BTTV_BOARD_IDS_EAGLE: 3414 init_ids_eagle(btv); 3415 break; 3416 case BTTV_BOARD_MODTEC_205: 3417 bttv_readee(btv,eeprom_data,0xa0); 3418 modtec_eeprom(btv); 3419 break; 3420 case BTTV_BOARD_LMLBT4: 3421 init_lmlbt4x(btv); 3422 break; 3423 case BTTV_BOARD_TIBET_CS16: 3424 tibetCS16_init(btv); 3425 break; 3426 case BTTV_BOARD_KODICOM_4400R: 3427 kodicom4400r_init(btv); 3428 break; 3429 case BTTV_BOARD_GEOVISION_GV800S: 3430 gv800s_init(btv); 3431 break; 3432 } 3433 3434 /* pll configuration */ 3435 if (!(btv->id==848 && btv->revision==0x11)) { 3436 /* defaults from card list */ 3437 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3438 btv->pll.pll_ifreq=28636363; 3439 btv->pll.pll_crystal=BT848_IFORM_XT0; 3440 } 3441 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3442 btv->pll.pll_ifreq=35468950; 3443 btv->pll.pll_crystal=BT848_IFORM_XT1; 3444 } 3445 /* insmod options can override */ 3446 switch (pll[btv->c.nr]) { 3447 case 0: /* none */ 3448 btv->pll.pll_crystal = 0; 3449 btv->pll.pll_ifreq = 0; 3450 btv->pll.pll_ofreq = 0; 3451 break; 3452 case 1: /* 28 MHz */ 3453 case 28: 3454 btv->pll.pll_ifreq = 28636363; 3455 btv->pll.pll_ofreq = 0; 3456 btv->pll.pll_crystal = BT848_IFORM_XT0; 3457 break; 3458 case 2: /* 35 MHz */ 3459 case 35: 3460 btv->pll.pll_ifreq = 35468950; 3461 btv->pll.pll_ofreq = 0; 3462 btv->pll.pll_crystal = BT848_IFORM_XT1; 3463 break; 3464 } 3465 } 3466 btv->pll.pll_current = -1; 3467 3468 /* tuner configuration (from card list / autodetect / insmod option) */ 3469 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3470 if (UNSET == btv->tuner_type) 3471 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3472 if (UNSET != tuner[btv->c.nr]) 3473 btv->tuner_type = tuner[btv->c.nr]; 3474 3475 if (btv->tuner_type == TUNER_ABSENT) 3476 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr); 3477 else if(btv->tuner_type == UNSET) 3478 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr); 3479 else 3480 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr, 3481 btv->tuner_type); 3482 3483 if (autoload != UNSET) { 3484 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr); 3485 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr); 3486 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr); 3487 } 3488 3489 if (UNSET == btv->tuner_type) 3490 btv->tuner_type = TUNER_ABSENT; 3491 3492 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3493 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3494 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3495 UNSET : bttv_tvcards[btv->c.type].svhs; 3496 if (svhs[btv->c.nr] != UNSET) 3497 btv->svhs = svhs[btv->c.nr]; 3498 if (remote[btv->c.nr] != UNSET) 3499 btv->has_remote = remote[btv->c.nr]; 3500 3501 if (bttv_tvcards[btv->c.type].has_radio) 3502 btv->has_radio = 1; 3503 if (bttv_tvcards[btv->c.type].has_remote) 3504 btv->has_remote = 1; 3505 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3506 btv->gpioirq = 1; 3507 if (bttv_tvcards[btv->c.type].volume_gpio) 3508 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3509 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3510 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3511 3512 if (btv->tuner_type == TUNER_ABSENT) 3513 return; /* no tuner or related drivers to load */ 3514 3515 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3516 /* Probe for RDS receiver chip */ 3517 static const unsigned short addrs[] = { 3518 0x20 >> 1, 3519 0x22 >> 1, 3520 I2C_CLIENT_END 3521 }; 3522 struct v4l2_subdev *sd; 3523 3524 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3525 &btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs); 3526 btv->has_saa6588 = (sd != NULL); 3527 } 3528 3529 /* try to detect audio/fader chips */ 3530 3531 /* First check if the user specified the audio chip via a module 3532 option. */ 3533 3534 switch (audiodev[btv->c.nr]) { 3535 case -1: 3536 return; /* do not load any audio module */ 3537 3538 case 0: /* autodetect */ 3539 break; 3540 3541 case 1: { 3542 /* The user specified that we should probe for msp3400 */ 3543 static const unsigned short addrs[] = { 3544 I2C_ADDR_MSP3400 >> 1, 3545 I2C_ADDR_MSP3400_ALT >> 1, 3546 I2C_CLIENT_END 3547 }; 3548 3549 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3550 &btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs); 3551 if (btv->sd_msp34xx) 3552 return; 3553 goto no_audio; 3554 } 3555 3556 case 2: { 3557 /* The user specified that we should probe for tda7432 */ 3558 static const unsigned short addrs[] = { 3559 I2C_ADDR_TDA7432 >> 1, 3560 I2C_CLIENT_END 3561 }; 3562 3563 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3564 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs)) 3565 return; 3566 goto no_audio; 3567 } 3568 3569 case 3: { 3570 /* The user specified that we should probe for tvaudio */ 3571 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3572 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs()); 3573 if (btv->sd_tvaudio) 3574 return; 3575 goto no_audio; 3576 } 3577 3578 default: 3579 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n", 3580 btv->c.nr); 3581 return; 3582 } 3583 3584 /* There were no overrides, so now we try to discover this through the 3585 card definition */ 3586 3587 /* probe for msp3400 first: this driver can detect whether or not 3588 it really is a msp3400, so it will return NULL when the device 3589 found is really something else (e.g. a tea6300). */ 3590 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3591 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3592 &btv->c.i2c_adap, "msp3400", "msp3400", 3593 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3594 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3595 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3596 &btv->c.i2c_adap, "msp3400", "msp3400", 3597 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3598 } 3599 3600 /* If we found a msp34xx, then we're done. */ 3601 if (btv->sd_msp34xx) 3602 return; 3603 3604 /* it might also be a tda7432. */ 3605 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3606 static const unsigned short addrs[] = { 3607 I2C_ADDR_TDA7432 >> 1, 3608 I2C_CLIENT_END 3609 }; 3610 3611 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3612 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs)) 3613 return; 3614 } 3615 3616 /* Now see if we can find one of the tvaudio devices. */ 3617 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3618 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs()); 3619 if (btv->sd_tvaudio) 3620 return; 3621 3622no_audio: 3623 printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n", 3624 btv->c.nr); 3625} 3626 3627 3628/* initialize the tuner */ 3629void __devinit bttv_init_tuner(struct bttv *btv) 3630{ 3631 int addr = ADDR_UNSET; 3632 3633 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3634 addr = bttv_tvcards[btv->c.type].tuner_addr; 3635 3636 if (btv->tuner_type != TUNER_ABSENT) { 3637 struct tuner_setup tun_setup; 3638 3639 /* Load tuner module before issuing tuner config call! */ 3640 if (bttv_tvcards[btv->c.type].has_radio) 3641 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3642 &btv->c.i2c_adap, "tuner", "tuner", 3643 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3644 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3645 &btv->c.i2c_adap, "tuner", "tuner", 3646 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3647 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3648 &btv->c.i2c_adap, "tuner", "tuner", 3649 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3650 3651 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; 3652 tun_setup.type = btv->tuner_type; 3653 tun_setup.addr = addr; 3654 3655 if (bttv_tvcards[btv->c.type].has_radio) 3656 tun_setup.mode_mask |= T_RADIO; 3657 3658 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3659 } 3660 3661 if (btv->tda9887_conf) { 3662 struct v4l2_priv_tun_config tda9887_cfg; 3663 3664 tda9887_cfg.tuner = TUNER_TDA9887; 3665 tda9887_cfg.priv = &btv->tda9887_conf; 3666 3667 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3668 } 3669} 3670 3671/* ----------------------------------------------------------------------- */ 3672 3673static void modtec_eeprom(struct bttv *btv) 3674{ 3675 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3676 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3677 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", 3678 btv->c.nr,&eeprom_data[0x1e]); 3679 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3680 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3681 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", 3682 btv->c.nr,&eeprom_data[0x1e]); 3683 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3684 btv->tuner_type=TUNER_PHILIPS_NTSC; 3685 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", 3686 btv->c.nr,&eeprom_data[0x1e]); 3687 } else { 3688 printk("bttv%d: Modtec: Unknown TunerString: %s\n", 3689 btv->c.nr,&eeprom_data[0x1e]); 3690 } 3691} 3692 3693static void __devinit hauppauge_eeprom(struct bttv *btv) 3694{ 3695 struct tveeprom tv; 3696 3697 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); 3698 btv->tuner_type = tv.tuner_type; 3699 btv->has_radio = tv.has_radio; 3700 3701 printk("bttv%d: Hauppauge eeprom indicates model#%d\n", 3702 btv->c.nr, tv.model); 3703 3704 /* 3705 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3706 * type based on model #. 3707 */ 3708 if(tv.model == 64900) { 3709 printk("bttv%d: Switching board type from %s to %s\n", 3710 btv->c.nr, 3711 bttv_tvcards[btv->c.type].name, 3712 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3713 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3714 } 3715} 3716 3717static int terratec_active_radio_upgrade(struct bttv *btv) 3718{ 3719 int freq; 3720 3721 btv->has_radio = 1; 3722 btv->has_matchbox = 1; 3723 btv->mbox_we = 0x10; 3724 btv->mbox_most = 0x20; 3725 btv->mbox_clk = 0x08; 3726 btv->mbox_data = 0x04; 3727 btv->mbox_mask = 0x3c; 3728 3729 btv->mbox_iow = 1 << 8; 3730 btv->mbox_ior = 1 << 9; 3731 btv->mbox_csel = 1 << 10; 3732 3733 freq=88000/62.5; 3734 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ 3735 if (0x1ed8 == tea5757_read(btv)) { 3736 printk("bttv%d: Terratec Active Radio Upgrade found.\n", 3737 btv->c.nr); 3738 btv->has_radio = 1; 3739 btv->has_saa6588 = 1; 3740 btv->has_matchbox = 1; 3741 } else { 3742 btv->has_radio = 0; 3743 btv->has_matchbox = 0; 3744 } 3745 return 0; 3746} 3747 3748 3749/* ----------------------------------------------------------------------- */ 3750 3751/* 3752 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3753 * 3754 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3755 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3756 * unpacked with unzip). 3757 */ 3758#define PVR_GPIO_DELAY 10 3759 3760#define BTTV_ALT_DATA 0x000001 3761#define BTTV_ALT_DCLK 0x100000 3762#define BTTV_ALT_NCONFIG 0x800000 3763 3764static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro, 3765 u32 microlen) 3766{ 3767 u32 n; 3768 u8 bits; 3769 int i; 3770 3771 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3772 gpio_write(0); 3773 udelay(PVR_GPIO_DELAY); 3774 3775 gpio_write(BTTV_ALT_NCONFIG); 3776 udelay(PVR_GPIO_DELAY); 3777 3778 for (n = 0; n < microlen; n++) { 3779 bits = micro[n]; 3780 for (i = 0 ; i < 8 ; i++) { 3781 gpio_bits(BTTV_ALT_DCLK,0); 3782 if (bits & 0x01) 3783 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3784 else 3785 gpio_bits(BTTV_ALT_DATA,0); 3786 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3787 bits >>= 1; 3788 } 3789 } 3790 gpio_bits(BTTV_ALT_DCLK,0); 3791 udelay(PVR_GPIO_DELAY); 3792 3793 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3794 for (i = 0 ; i < 30 ; i++) { 3795 gpio_bits(BTTV_ALT_DCLK,0); 3796 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3797 } 3798 gpio_bits(BTTV_ALT_DCLK,0); 3799 return 0; 3800} 3801 3802static int __devinit pvr_boot(struct bttv *btv) 3803{ 3804 const struct firmware *fw_entry; 3805 int rc; 3806 3807 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3808 if (rc != 0) { 3809 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n", 3810 btv->c.nr); 3811 return rc; 3812 } 3813 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3814 printk(KERN_INFO "bttv%d: altera firmware upload %s\n", 3815 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3816 release_firmware(fw_entry); 3817 return rc; 3818} 3819 3820/* ----------------------------------------------------------------------- */ 3821/* some osprey specific stuff */ 3822 3823static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3824{ 3825 int i; 3826 u32 serial = 0; 3827 int cardid = -1; 3828 3829 /* This code will nevery actually get called in this case.... */ 3830 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3831 /* this might be an antique... check for MMAC label in eeprom */ 3832 if (!strncmp(ee, "MMAC", 4)) { 3833 u8 checksum = 0; 3834 for (i = 0; i < 21; i++) 3835 checksum += ee[i]; 3836 if (checksum != ee[21]) 3837 return; 3838 cardid = BTTV_BOARD_OSPREY1x0_848; 3839 for (i = 12; i < 21; i++) 3840 serial *= 10, serial += ee[i] - '0'; 3841 } 3842 } else { 3843 unsigned short type; 3844 3845 for (i = 4*16; i < 8*16; i += 16) { 3846 u16 checksum = ip_compute_csum(ee + i, 16); 3847 3848 if ((checksum&0xff) + (checksum>>8) == 0xff) 3849 break; 3850 } 3851 if (i >= 8*16) 3852 return; 3853 ee += i; 3854 3855 /* found a valid descriptor */ 3856 type = get_unaligned_be16((__be16 *)(ee+4)); 3857 3858 switch(type) { 3859 /* 848 based */ 3860 case 0x0004: 3861 cardid = BTTV_BOARD_OSPREY1x0_848; 3862 break; 3863 case 0x0005: 3864 cardid = BTTV_BOARD_OSPREY101_848; 3865 break; 3866 3867 /* 878 based */ 3868 case 0x0012: 3869 case 0x0013: 3870 cardid = BTTV_BOARD_OSPREY1x0; 3871 break; 3872 case 0x0014: 3873 case 0x0015: 3874 cardid = BTTV_BOARD_OSPREY1x1; 3875 break; 3876 case 0x0016: 3877 case 0x0017: 3878 case 0x0020: 3879 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3880 break; 3881 case 0x0018: 3882 case 0x0019: 3883 case 0x001E: 3884 case 0x001F: 3885 cardid = BTTV_BOARD_OSPREY2xx; 3886 break; 3887 case 0x001A: 3888 case 0x001B: 3889 cardid = BTTV_BOARD_OSPREY2x0_SVID; 3890 break; 3891 case 0x0040: 3892 cardid = BTTV_BOARD_OSPREY500; 3893 break; 3894 case 0x0050: 3895 case 0x0056: 3896 cardid = BTTV_BOARD_OSPREY540; 3897 /* bttv_osprey_540_init(btv); */ 3898 break; 3899 case 0x0060: 3900 case 0x0070: 3901 case 0x00A0: 3902 cardid = BTTV_BOARD_OSPREY2x0; 3903 /* enable output on select control lines */ 3904 gpio_inout(0xffffff,0x000303); 3905 break; 3906 case 0x00D8: 3907 cardid = BTTV_BOARD_OSPREY440; 3908 break; 3909 default: 3910 /* unknown...leave generic, but get serial # */ 3911 printk(KERN_INFO "bttv%d: " 3912 "osprey eeprom: unknown card type 0x%04x\n", 3913 btv->c.nr, type); 3914 break; 3915 } 3916 serial = get_unaligned_be32((__be32 *)(ee+6)); 3917 } 3918 3919 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", 3920 btv->c.nr, cardid, 3921 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial); 3922 3923 if (cardid<0 || btv->c.type == cardid) 3924 return; 3925 3926 /* card type isn't set correctly */ 3927 if (card[btv->c.nr] < bttv_num_tvcards) { 3928 printk(KERN_WARNING "bttv%d: osprey eeprom: " 3929 "Not overriding user specified card type\n", btv->c.nr); 3930 } else { 3931 printk(KERN_INFO "bttv%d: osprey eeprom: " 3932 "Changing card type from %d to %d\n", btv->c.nr, 3933 btv->c.type, cardid); 3934 btv->c.type = cardid; 3935 } 3936} 3937 3938/* ----------------------------------------------------------------------- */ 3939/* AVermedia specific stuff, from bktr_card.c */ 3940 3941static int tuner_0_table[] = { 3942 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 3943 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 3944 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 3945 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 3946 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 3947 TUNER_PHILIPS_FM1216ME_MK3 }; 3948 3949static int tuner_1_table[] = { 3950 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 3951 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 3952 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 3953 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 3954 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 3955 3956static void __devinit avermedia_eeprom(struct bttv *btv) 3957{ 3958 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 3959 3960 tuner_make = (eeprom_data[0x41] & 0x7); 3961 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 3962 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 3963 btv->has_remote = (eeprom_data[0x42] & 0x01); 3964 3965 if (tuner_make == 0 || tuner_make == 2) 3966 if (tuner_format <= 0x0a) 3967 tuner_type = tuner_0_table[tuner_format]; 3968 if (tuner_make == 1) 3969 if (tuner_format <= 9) 3970 tuner_type = tuner_1_table[tuner_format]; 3971 3972 if (tuner_make == 4) 3973 if (tuner_format == 0x09) 3974 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 3975 3976 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", 3977 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 3978 if (tuner_type) { 3979 btv->tuner_type = tuner_type; 3980 printk(KERN_CONT "%d", tuner_type); 3981 } else 3982 printk(KERN_CONT "Unknown type"); 3983 printk(KERN_CONT " radio:%s remote control:%s\n", 3984 tuner_tv_fm ? "yes" : "no", 3985 btv->has_remote ? "yes" : "no"); 3986} 3987 3988/* 3989 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 3990 * analog demod, which is not I2C controlled like the newer and more common 3991 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, 3992 * that control the IF for the video and audio. Apparently, bttv GPIO 3993 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 3994 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 3995 */ 3996u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 3997{ 3998 3999 if (btv->audio == TVAUDIO_INPUT_TUNER) { 4000 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 4001 gpiobits |= 0x10000; 4002 else 4003 gpiobits &= ~0x10000; 4004 } 4005 4006 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 4007 return gpiobits; 4008} 4009 4010 4011/* 4012 * reset/enable the MSP on some Hauppauge cards 4013 * Thanks to Ky��sti M��lkki (kmalkki@cc.hut.fi)! 4014 * 4015 * Hauppauge: pin 5 4016 * Voodoo: pin 20 4017 */ 4018static void __devinit boot_msp34xx(struct bttv *btv, int pin) 4019{ 4020 int mask = (1 << pin); 4021 4022 gpio_inout(mask,mask); 4023 gpio_bits(mask,0); 4024 mdelay(2); 4025 udelay(500); 4026 gpio_bits(mask,mask); 4027 4028 if (bttv_gpio) 4029 bttv_gpio_tracking(btv,"msp34xx"); 4030 if (bttv_verbose) 4031 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line " 4032 "init [%d]\n", btv->c.nr, pin); 4033} 4034 4035/* ----------------------------------------------------------------------- */ 4036/* Imagenation L-Model PXC200 Framegrabber */ 4037/* This is basically the same procedure as 4038 * used by Alessandro Rubini in his pxc200 4039 * driver, but using BTTV functions */ 4040 4041static void __devinit init_PXC200(struct bttv *btv) 4042{ 4043 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 4044 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 4045 0x00 }; 4046 unsigned int i; 4047 int tmp; 4048 u32 val; 4049 4050 /* Initialise GPIO-connevted stuff */ 4051 gpio_inout(0xffffff, (1<<13)); 4052 gpio_write(0); 4053 udelay(3); 4054 gpio_write(1<<13); 4055 /* GPIO inputs are pulled up, so no need to drive 4056 * reset pin any longer */ 4057 gpio_bits(0xffffff, 0); 4058 if (bttv_gpio) 4059 bttv_gpio_tracking(btv,"pxc200"); 4060 4061 /* we could/should try and reset/control the AD pots? but 4062 right now we simply turned off the crushing. Without 4063 this the AGC drifts drifts 4064 remember the EN is reverse logic --> 4065 setting BT848_ADC_AGC_EN disable the AGC 4066 tboult@eecs.lehigh.edu 4067 */ 4068 4069 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4070 4071 /* Initialise MAX517 DAC */ 4072 printk(KERN_INFO "Setting DAC reference voltage level ...\n"); 4073 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4074 4075 /* Initialise 12C508 PIC */ 4076 /* The I2CWrite and I2CRead commmands are actually to the 4077 * same chips - but the R/W bit is included in the address 4078 * argument so the numbers are different */ 4079 4080 4081 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n"); 4082 4083 /* First of all, enable the clock line. This is used in the PXC200-F */ 4084 val = btread(BT848_GPIO_DMA_CTL); 4085 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4086 btwrite(val, BT848_GPIO_DMA_CTL); 4087 4088 /* Then, push to 0 the reset pin long enough to reset the * 4089 * device same as above for the reset line, but not the same 4090 * value sent to the GPIO-connected stuff 4091 * which one is the good one? */ 4092 gpio_inout(0xffffff,(1<<2)); 4093 gpio_write(0); 4094 udelay(10); 4095 gpio_write(1<<2); 4096 4097 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4098 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4099 if (tmp != -1) { 4100 printk(KERN_INFO 4101 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4102 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4103 } 4104 } 4105 4106 printk(KERN_INFO "PXC200 Initialised.\n"); 4107} 4108 4109 4110 4111/* ----------------------------------------------------------------------- */ 4112/* 4113 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4114 * it. This apparently involves the following procedure for each 878 chip: 4115 * 4116 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4117 * 4118 * 2) write to GPIO_DATA 4119 * - 0x0E 4120 * - sleep 1ms 4121 * - 0x10 + 0x0E 4122 * - sleep 10ms 4123 * - 0x0E 4124 * read from GPIO_DATA into buf (uint_32) 4125 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4126 * error. ERROR_CPLD_Check_Failed stop. 4127 * 4128 * 3) write to GPIO_DATA 4129 * - write 0x4400 + 0x0E 4130 * - sleep 10ms 4131 * - write 0x4410 + 0x0E 4132 * - sleep 1ms 4133 * - write 0x0E 4134 * read from GPIO_DATA into buf (uint_32) 4135 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4136 * error. ERROR_CPLD_Check_Failed. 4137 */ 4138/* ----------------------------------------------------------------------- */ 4139static void 4140init_RTV24 (struct bttv *btv) 4141{ 4142 uint32_t dataRead = 0; 4143 long watchdog_value = 0x0E; 4144 4145 printk (KERN_INFO 4146 "bttv%d: Adlink RTV-24 initialisation in progress ...\n", 4147 btv->c.nr); 4148 4149 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4150 4151 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4152 msleep (1); 4153 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4154 msleep (10); 4155 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4156 4157 dataRead = btread (BT848_GPIO_DATA); 4158 4159 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4160 printk (KERN_INFO 4161 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4162 btv->c.nr, dataRead); 4163 } 4164 4165 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4166 msleep (10); 4167 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4168 msleep (1); 4169 btwrite (watchdog_value, BT848_GPIO_DATA); 4170 msleep (1); 4171 dataRead = btread (BT848_GPIO_DATA); 4172 4173 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4174 printk (KERN_INFO 4175 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4176 btv->c.nr, dataRead); 4177 4178 return; 4179 } 4180 4181 printk (KERN_INFO 4182 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr); 4183} 4184 4185 4186 4187/* ----------------------------------------------------------------------- */ 4188/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ 4189/* 4190 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu> 4191 * This code is placed under the terms of the GNU General Public License 4192 * 4193 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00 4194 */ 4195 4196static void bus_low(struct bttv *btv, int bit) 4197{ 4198 if (btv->mbox_ior) { 4199 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4200 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4201 udelay(5); 4202 } 4203 4204 gpio_bits(bit,0); 4205 udelay(5); 4206 4207 if (btv->mbox_ior) { 4208 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4209 udelay(5); 4210 } 4211} 4212 4213static void bus_high(struct bttv *btv, int bit) 4214{ 4215 if (btv->mbox_ior) { 4216 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4217 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4218 udelay(5); 4219 } 4220 4221 gpio_bits(bit,bit); 4222 udelay(5); 4223 4224 if (btv->mbox_ior) { 4225 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4226 udelay(5); 4227 } 4228} 4229 4230static int bus_in(struct bttv *btv, int bit) 4231{ 4232 if (btv->mbox_ior) { 4233 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4234 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4235 udelay(5); 4236 4237 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4238 udelay(5); 4239 } 4240 return gpio_read() & (bit); 4241} 4242 4243/* TEA5757 register bits */ 4244#define TEA_FREQ 0:14 4245#define TEA_BUFFER 15:15 4246 4247#define TEA_SIGNAL_STRENGTH 16:17 4248 4249#define TEA_PORT1 18:18 4250#define TEA_PORT0 19:19 4251 4252#define TEA_BAND 20:21 4253#define TEA_BAND_FM 0 4254#define TEA_BAND_MW 1 4255#define TEA_BAND_LW 2 4256#define TEA_BAND_SW 3 4257 4258#define TEA_MONO 22:22 4259#define TEA_ALLOW_STEREO 0 4260#define TEA_FORCE_MONO 1 4261 4262#define TEA_SEARCH_DIRECTION 23:23 4263#define TEA_SEARCH_DOWN 0 4264#define TEA_SEARCH_UP 1 4265 4266#define TEA_STATUS 24:24 4267#define TEA_STATUS_TUNED 0 4268#define TEA_STATUS_SEARCHING 1 4269 4270/* Low-level stuff */ 4271static int tea5757_read(struct bttv *btv) 4272{ 4273 unsigned long timeout; 4274 int value = 0; 4275 int i; 4276 4277 /* better safe than sorry */ 4278 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); 4279 4280 if (btv->mbox_ior) { 4281 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4282 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4283 udelay(5); 4284 } 4285 4286 if (bttv_gpio) 4287 bttv_gpio_tracking(btv,"tea5757 read"); 4288 4289 bus_low(btv,btv->mbox_we); 4290 bus_low(btv,btv->mbox_clk); 4291 4292 udelay(10); 4293 timeout= jiffies + msecs_to_jiffies(1000); 4294 4295 /* wait for DATA line to go low; error if it doesn't */ 4296 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) 4297 schedule(); 4298 if (bus_in(btv,btv->mbox_data)) { 4299 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr); 4300 return -1; 4301 } 4302 4303 dprintk("bttv%d: tea5757:",btv->c.nr); 4304 for (i = 0; i < 24; i++) { 4305 udelay(5); 4306 bus_high(btv,btv->mbox_clk); 4307 udelay(5); 4308 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-'); 4309 bus_low(btv,btv->mbox_clk); 4310 value <<= 1; 4311 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ 4312 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M'); 4313 } 4314 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value); 4315 return value; 4316} 4317 4318static int tea5757_write(struct bttv *btv, int value) 4319{ 4320 int i; 4321 int reg = value; 4322 4323 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); 4324 4325 if (btv->mbox_ior) { 4326 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4327 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4328 udelay(5); 4329 } 4330 if (bttv_gpio) 4331 bttv_gpio_tracking(btv,"tea5757 write"); 4332 4333 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value); 4334 bus_low(btv,btv->mbox_clk); 4335 bus_high(btv,btv->mbox_we); 4336 for (i = 0; i < 25; i++) { 4337 if (reg & 0x1000000) 4338 bus_high(btv,btv->mbox_data); 4339 else 4340 bus_low(btv,btv->mbox_data); 4341 reg <<= 1; 4342 bus_high(btv,btv->mbox_clk); 4343 udelay(10); 4344 bus_low(btv,btv->mbox_clk); 4345 udelay(10); 4346 } 4347 bus_low(btv,btv->mbox_we); /* unmute !!! */ 4348 return 0; 4349} 4350 4351void tea5757_set_freq(struct bttv *btv, unsigned short freq) 4352{ 4353 dprintk("tea5757_set_freq %d\n",freq); 4354 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ 4355} 4356 4357/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4358 * 4359 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4360 * switch instead (CD22M3494E). This IC can have multiple active connections 4361 * between Xn (input) and Yn (output) pins. We need to clear any existing 4362 * connection prior to establish a new one, pulsing the STROBE pin. 4363 * 4364 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4365 * GPIO pins are wired as: 4366 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4367 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4368 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4369 * GPIO[8] - - P3[5] (microcontroller) 4370 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4371 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4372 * GPINTR - - P3[4] (microcontroller) 4373 * 4374 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4375 * configuration either directly (as we are doing) or using the microcontroller 4376 * which is also wired to I2C interface. I have no further info on the 4377 * microcontroller features, one would need to disassembly the firmware. 4378 * note: the vendor refused to give any information on this product, all 4379 * that stuff was found using a multimeter! :) 4380 */ 4381static void rv605_muxsel(struct bttv *btv, unsigned int input) 4382{ 4383 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4384 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4385 4386 gpio_bits(0x07f, muxgpio[input]); 4387 4388 /* reset all conections */ 4389 gpio_bits(0x200,0x200); 4390 mdelay(1); 4391 gpio_bits(0x200,0x000); 4392 mdelay(1); 4393 4394 /* create a new connection */ 4395 gpio_bits(0x480,0x480); 4396 mdelay(1); 4397 gpio_bits(0x480,0x080); 4398 mdelay(1); 4399} 4400 4401/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4402 * 4403 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4404 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4405 * chips, ten eight input analog multiplexors, a not chip and a few 4406 * other components. 4407 * 4408 * 16 inputs on a secondary bracket are provided and can be selected 4409 * from each of the four capture chips. Two of the eight input 4410 * multiplexors are used to select from any of the 16 input signals. 4411 * 4412 * Unsupported hardware capabilities: 4413 * . A video output monitor on the secondary bracket can be selected from 4414 * one of the 878A chips. 4415 * . Another passthrough but I haven't spent any time investigating it. 4416 * . Digital I/O (logic level connected to GPIO) is available from an 4417 * onboard header. 4418 * 4419 * The on chip input mux should always be set to 2. 4420 * GPIO[16:19] - Video input selection 4421 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4422 * GPIO[?:?] - Digital I/O. 4423 * 4424 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4425 * determined what function (if any) it provides. With the microcontroller 4426 * and sync separator chips a guess is that it might have to do with video 4427 * switching and maybe some digital I/O. 4428 */ 4429static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4430{ 4431 /* video mux */ 4432 gpio_bits(0x0f0000, input << 16); 4433} 4434 4435static void tibetCS16_init(struct bttv *btv) 4436{ 4437 /* enable gpio bits, mask obtained via btSpy */ 4438 gpio_inout(0xffffff, 0x0f7fff); 4439 gpio_write(0x0f7fff); 4440} 4441 4442/* 4443 * The following routines for the Kodicom-4400r get a little mind-twisting. 4444 * There is a "master" controller and three "slave" controllers, together 4445 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4446 * The analog switch is controlled by the "master", but the detection order 4447 * of the four BT878A chips is in an order which I just don't understand. 4448 * The "master" is actually the second controller to be detected. The 4449 * logic on the board uses logical numbers for the 4 controllers, but 4450 * those numbers are different from the detection sequence. When working 4451 * with the analog switch, we need to "map" from the detection sequence 4452 * over to the board's logical controller number. This mapping sequence 4453 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4454 * unit 3, the second (which is the master) is logical unit 0, etc. 4455 * We need to maintain the status of the analog switch (which of the 16 4456 * cameras is connected to which of the 4 controllers). Rather than 4457 * add to the bttv structure for this, we use the data reserved for 4458 * the mbox (unused for this card type). 4459 */ 4460 4461/* 4462 * First a routine to set the analog switch, which controls which camera 4463 * is routed to which controller. The switch comprises an X-address 4464 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4465 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4466 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4467 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4468 * specified address. The idea is to set the address and data, then bring 4469 * STROBE high, and finally bring STROBE back to low. 4470 */ 4471static void kodicom4400r_write(struct bttv *btv, 4472 unsigned char xaddr, 4473 unsigned char yaddr, 4474 unsigned char data) { 4475 unsigned int udata; 4476 4477 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4478 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4479 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4480 gpio_bits(0x1ff, udata); /* strobe low */ 4481} 4482 4483/* 4484 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4485 * use this routine. The routine finds the "master" for the card, maps 4486 * the controller number from the detected position over to the logical 4487 * number, writes the appropriate data to the analog switch, and housekeeps 4488 * the local copy of the switch information. The parameter 'input' is the 4489 * requested camera number (0 - 15). 4490 */ 4491static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4492{ 4493 char *sw_status; 4494 int xaddr, yaddr; 4495 struct bttv *mctlr; 4496 static unsigned char map[4] = {3, 0, 2, 1}; 4497 4498 mctlr = master[btv->c.nr]; 4499 if (mctlr == NULL) { /* ignore if master not yet detected */ 4500 return; 4501 } 4502 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4503 yaddr = map[yaddr]; 4504 sw_status = (char *)(&mctlr->mbox_we); 4505 xaddr = input & 0xf; 4506 /* Check if the controller/camera pair has changed, else ignore */ 4507 if (sw_status[yaddr] != xaddr) 4508 { 4509 /* "open" the old switch, "close" the new one, save the new */ 4510 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); 4511 sw_status[yaddr] = xaddr; 4512 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4513 } 4514} 4515 4516/* 4517 * During initialisation, we need to reset the analog switch. We 4518 * also preset the switch to map the 4 connectors on the card to the 4519 * *user's* (see above description of kodicom4400r_muxsel) channels 4520 * 0 through 3 4521 */ 4522static void kodicom4400r_init(struct bttv *btv) 4523{ 4524 char *sw_status = (char *)(&btv->mbox_we); 4525 int ix; 4526 4527 gpio_inout(0x0003ff, 0x0003ff); 4528 gpio_write(1 << 9); /* reset MUX */ 4529 gpio_write(0); 4530 /* Preset camera 0 to the 4 controllers */ 4531 for (ix = 0; ix < 4; ix++) { 4532 sw_status[ix] = ix; 4533 kodicom4400r_write(btv, ix, ix, 1); 4534 } 4535 /* 4536 * Since this is the "master", we need to set up the 4537 * other three controller chips' pointers to this structure 4538 * for later use in the muxsel routine. 4539 */ 4540 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4541 return; 4542 master[btv->c.nr-1] = btv; 4543 master[btv->c.nr] = btv; 4544 master[btv->c.nr+1] = btv; 4545 master[btv->c.nr+2] = btv; 4546} 4547 4548#define ENA0 0x01 4549#define ENB0 0x02 4550#define ENA1 0x04 4551#define ENB1 0x08 4552 4553#define IN10 0x10 4554#define IN00 0x20 4555#define IN11 0x40 4556#define IN01 0x80 4557 4558static void xguard_muxsel(struct bttv *btv, unsigned int input) 4559{ 4560 static const int masks[] = { 4561 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4562 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4563 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4564 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4565 }; 4566 gpio_write(masks[input%16]); 4567} 4568static void picolo_tetra_init(struct bttv *btv) 4569{ 4570 /*This is the video input redirection fonctionality : I DID NOT USED IT. */ 4571 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4572 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4573} 4574static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4575{ 4576 4577 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input); 4578 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4579 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4580 btwrite (input<<20,BT848_GPIO_DATA); 4581 4582} 4583 4584/* 4585 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4586 * 4587 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4588 * swichers to provide 16 channels to MUX0. The TDA8540's have 4589 * 4 independent outputs and as such the IVC120G also has the 4590 * optional "Monitor Out" bus. This allows the card to be looking 4591 * at one input while the monitor is looking at another. 4592 * 4593 * Since I've couldn't be bothered figuring out how to add an 4594 * independant muxsel for the monitor bus, I've just set it to 4595 * whatever the card is looking at. 4596 * 4597 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4598 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4599 * 4600 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4601 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4602 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4603 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4604 * 4605 */ 4606 4607/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4608#define I2C_TDA8540 0x90 4609#define I2C_TDA8540_ALT1 0x92 4610#define I2C_TDA8540_ALT2 0x94 4611#define I2C_TDA8540_ALT3 0x96 4612#define I2C_TDA8540_ALT4 0x98 4613#define I2C_TDA8540_ALT5 0x9a 4614#define I2C_TDA8540_ALT6 0x9c 4615 4616static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4617{ 4618 /* Simple maths */ 4619 int key = input % 4; 4620 int matrix = input / 4; 4621 4622 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4623 btv->c.nr, input, matrix, key); 4624 4625 /* Handles the input selection on the TDA8540's */ 4626 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4627 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4628 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4629 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4630 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4631 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4632 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4633 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4634 4635 /* Handles the output enables on the TDA8540's */ 4636 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4637 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4638 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4639 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4640 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4641 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4642 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4643 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4644 4645 /* 878's MUX0 is already selected for input via muxsel values */ 4646} 4647 4648 4649/* PXC200 muxsel helper 4650 * luke@syseng.anu.edu.au 4651 * another transplant 4652 * from Alessandro Rubini (rubini@linux.it) 4653 * 4654 * There are 4 kinds of cards: 4655 * PXC200L which is bt848 4656 * PXC200F which is bt848 with PIC controlling mux 4657 * PXC200AL which is bt878 4658 * PXC200AF which is bt878 with PIC controlling mux 4659 */ 4660#define PX_CFG_PXC200F 0x01 4661#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4662#define PX_I2C_PIC 0x0f 4663#define PX_PXC200A_CARDID 0x200a1295 4664#define PX_I2C_CMD_CFG 0x00 4665 4666static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4667{ 4668 int rc; 4669 long mux; 4670 int bitmask; 4671 unsigned char buf[2]; 4672 4673 /* Read PIC config to determine if this is a PXC200F */ 4674 /* PX_I2C_CMD_CFG*/ 4675 buf[0]=0; 4676 buf[1]=0; 4677 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4678 if (rc) { 4679 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc); 4680 /* not PXC ? do nothing */ 4681 return; 4682 } 4683 4684 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4685 if (!(rc & PX_CFG_PXC200F)) { 4686 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc); 4687 return; 4688 } 4689 4690 4691 /* The multiplexer in the 200F is handled by the GPIO port */ 4692 /* get correct mapping between inputs */ 4693 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4694 /* ** not needed!? */ 4695 mux = input; 4696 4697 /* make sure output pins are enabled */ 4698 /* bitmask=0x30f; */ 4699 bitmask=0x302; 4700 /* check whether we have a PXC200A */ 4701 if (btv->cardid == PX_PXC200A_CARDID) { 4702 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4703 bitmask |= 7<<4; /* the DAC */ 4704 } 4705 btwrite(bitmask, BT848_GPIO_OUT_EN); 4706 4707 bitmask = btread(BT848_GPIO_DATA); 4708 if (btv->cardid == PX_PXC200A_CARDID) 4709 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4710 else /* older device */ 4711 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4712 btwrite(bitmask,BT848_GPIO_DATA); 4713 4714 /* 4715 * Was "to be safe, set the bt848 to input 0" 4716 * Actually, since it's ok at load time, better not messing 4717 * with these bits (on PXC200AF you need to set mux 2 here) 4718 * 4719 * needed because bttv-driver sets mux before calling this function 4720 */ 4721 if (btv->cardid == PX_PXC200A_CARDID) 4722 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4723 else /* older device */ 4724 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4725 4726 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux); 4727} 4728 4729static void phytec_muxsel(struct bttv *btv, unsigned int input) 4730{ 4731 unsigned int mux = input % 4; 4732 4733 if (input == btv->svhs) 4734 mux = 0; 4735 4736 gpio_bits(0x3, mux); 4737} 4738 4739/* 4740 * GeoVision GV-800(S) functions 4741 * Bruno Christo <bchristo@inf.ufsm.br> 4742*/ 4743 4744/* This is a function to control the analog switch, which determines which 4745 * camera is routed to which controller. The switch comprises an X-address 4746 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4747 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4748 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4749 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4750 * specified address. There is also a chip select (gpio bit 16). 4751 * The idea is to set the address and chip select together, bring 4752 * STROBE high, write the data, and finally bring STROBE back to low. 4753 */ 4754static void gv800s_write(struct bttv *btv, 4755 unsigned char xaddr, 4756 unsigned char yaddr, 4757 unsigned char data) { 4758 /* On the "master" 878A: 4759 * GPIO bits 0-9 are used for the analog switch: 4760 * 00 - 03: camera selector 4761 * 04 - 06: 878A (controller) selector 4762 * 16: cselect 4763 * 17: strobe 4764 * 18: data (1->on, 0->off) 4765 * 19: reset 4766 */ 4767 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4768 const u32 CSELECT = 1<<16; 4769 const u32 STROBE = 1<<17; 4770 const u32 DATA = data<<18; 4771 4772 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4773 gpio_bits(0x20000, STROBE); /* STROBE high */ 4774 gpio_bits(0x40000, DATA); /* write DATA */ 4775 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4776} 4777 4778/* 4779 * GeoVision GV-800(S) muxsel 4780 * 4781 * Each of the 4 cards (controllers) use this function. 4782 * The controller using this function selects the input through the GPIO pins 4783 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4784 * 4785 * The parameter 'input' is the requested camera number (0-4) on the controller. 4786 * The map array has the address of each input. Note that the addresses in the 4787 * array are in the sequence the original GeoVision driver uses, that is, set 4788 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4789 * the physical "camera 1" connector corresponds to controller 0 input 0, 4790 * "camera 2" corresponds to controller 1 input 0, and so on. 4791 * 4792 * After getting the input address, the function then writes the appropriate 4793 * data to the analog switch, and housekeeps the local copy of the switch 4794 * information. 4795 */ 4796static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4797{ 4798 struct bttv *mctlr; 4799 char *sw_status; 4800 int xaddr, yaddr; 4801 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4802 { 0x1, 0x5, 0xb, 0x7 }, 4803 { 0x2, 0x8, 0xc, 0xe }, 4804 { 0x3, 0x9, 0xd, 0xf } }; 4805 input = input%4; 4806 mctlr = master[btv->c.nr]; 4807 if (mctlr == NULL) { 4808 /* do nothing until the "master" is detected */ 4809 return; 4810 } 4811 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4812 sw_status = (char *)(&mctlr->mbox_we); 4813 xaddr = map[yaddr][input] & 0xf; 4814 4815 /* Check if the controller/camera pair has changed, ignore otherwise */ 4816 if (sw_status[yaddr] != xaddr) { 4817 /* disable the old switch, enable the new one and save status */ 4818 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0); 4819 sw_status[yaddr] = xaddr; 4820 gv800s_write(mctlr, xaddr, yaddr, 1); 4821 } 4822} 4823 4824/* GeoVision GV-800(S) "master" chip init */ 4825static void gv800s_init(struct bttv *btv) 4826{ 4827 char *sw_status = (char *)(&btv->mbox_we); 4828 int ix; 4829 4830 gpio_inout(0xf107f, 0xf107f); 4831 gpio_write(1<<19); /* reset the analog MUX */ 4832 gpio_write(0); 4833 4834 /* Preset camera 0 to the 4 controllers */ 4835 for (ix = 0; ix < 4; ix++) { 4836 sw_status[ix] = ix; 4837 gv800s_write(btv, ix, ix, 1); 4838 } 4839 4840 /* Inputs on the "master" controller need this brightness fix */ 4841 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4842 4843 if (btv->c.nr > BTTV_MAX-4) 4844 return; 4845 /* 4846 * Store the "master" controller pointer in the master 4847 * array for later use in the muxsel function. 4848 */ 4849 master[btv->c.nr] = btv; 4850 master[btv->c.nr+1] = btv; 4851 master[btv->c.nr+2] = btv; 4852 master[btv->c.nr+3] = btv; 4853} 4854 4855/* ----------------------------------------------------------------------- */ 4856/* motherboard chipset specific stuff */ 4857 4858void __init bttv_check_chipset(void) 4859{ 4860 int pcipci_fail = 0; 4861 struct pci_dev *dev = NULL; 4862 4863 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ 4864 pcipci_fail = 1; 4865 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4866 triton1 = 1; 4867 if (pci_pci_problems & PCIPCI_VSFX) 4868 vsfx = 1; 4869#ifdef PCIPCI_ALIMAGIK 4870 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4871 latency = 0x0A; 4872#endif 4873 4874 4875 /* print warnings about any quirks found */ 4876 if (triton1) 4877 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n"); 4878 if (vsfx) 4879 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); 4880 if (pcipci_fail) { 4881 printk(KERN_INFO "bttv: bttv and your chipset may not work " 4882 "together.\n"); 4883 if (!no_overlay) { 4884 printk(KERN_INFO "bttv: overlay will be disabled.\n"); 4885 no_overlay = 1; 4886 } else { 4887 printk(KERN_INFO "bttv: overlay forced. Use this " 4888 "option at your own risk.\n"); 4889 } 4890 } 4891 if (UNSET != latency) 4892 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency); 4893 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4894 PCI_DEVICE_ID_INTEL_82441, dev))) { 4895 unsigned char b; 4896 pci_read_config_byte(dev, 0x53, &b); 4897 if (bttv_debug) 4898 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " 4899 "bufcon=0x%02x\n",b); 4900 } 4901} 4902 4903int __devinit bttv_handle_chipset(struct bttv *btv) 4904{ 4905 unsigned char command; 4906 4907 if (!triton1 && !vsfx && UNSET == latency) 4908 return 0; 4909 4910 if (bttv_verbose) { 4911 if (triton1) 4912 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr); 4913 if (vsfx && btv->id >= 878) 4914 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr); 4915 if (UNSET != latency) 4916 printk(KERN_INFO "bttv%d: setting pci timer to %d\n", 4917 btv->c.nr,latency); 4918 } 4919 4920 if (btv->id < 878) { 4921 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4922 if (triton1) 4923 btv->triton1 = BT848_INT_ETBF; 4924 } else { 4925 /* bt878 has a bit in the pci config space for it */ 4926 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4927 if (triton1) 4928 command |= BT878_EN_TBFX; 4929 if (vsfx) 4930 command |= BT878_EN_VSFX; 4931 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4932 } 4933 if (UNSET != latency) 4934 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4935 return 0; 4936} 4937 4938 4939/* 4940 * Local variables: 4941 * c-basic-offset: 8 4942 * End: 4943 */ 4944