1/* 2 * File: mca_asm.h 3 * Purpose: Machine check handling specific defines 4 * 5 * Copyright (C) 1999 Silicon Graphics, Inc. 6 * Copyright (C) Vijay Chander <vijay@engr.sgi.com> 7 * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com> 8 * Copyright (C) 2000 Hewlett-Packard Co. 9 * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com> 10 * Copyright (C) 2002 Intel Corp. 11 * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com> 12 * Copyright (C) 2005 Silicon Graphics, Inc 13 * Copyright (C) 2005 Keith Owens <kaos@sgi.com> 14 */ 15#ifndef _ASM_IA64_MCA_ASM_H 16#define _ASM_IA64_MCA_ASM_H 17 18#define PSR_IC 13 19#define PSR_I 14 20#define PSR_DT 17 21#define PSR_RT 27 22#define PSR_MC 35 23#define PSR_IT 36 24#define PSR_BN 44 25 26/* 27 * This macro converts a instruction virtual address to a physical address 28 * Right now for simulation purposes the virtual addresses are 29 * direct mapped to physical addresses. 30 * 1. Lop off bits 61 thru 63 in the virtual address 31 */ 32#define INST_VA_TO_PA(addr) \ 33 dep addr = 0, addr, 61, 3 34/* 35 * This macro converts a data virtual address to a physical address 36 * Right now for simulation purposes the virtual addresses are 37 * direct mapped to physical addresses. 38 * 1. Lop off bits 61 thru 63 in the virtual address 39 */ 40#define DATA_VA_TO_PA(addr) \ 41 tpa addr = addr 42/* 43 * This macro converts a data physical address to a virtual address 44 * Right now for simulation purposes the virtual addresses are 45 * direct mapped to physical addresses. 46 * 1. Put 0x7 in bits 61 thru 63. 47 */ 48#define DATA_PA_TO_VA(addr,temp) \ 49 mov temp = 0x7 ;; \ 50 dep addr = temp, addr, 61, 3 51 52#define GET_THIS_PADDR(reg, var) \ 53 mov reg = IA64_KR(PER_CPU_DATA);; \ 54 addl reg = THIS_CPU(var), reg 55 56/* 57 * This macro jumps to the instruction at the given virtual address 58 * and starts execution in physical mode with all the address 59 * translations turned off. 60 * 1. Save the current psr 61 * 2. Make sure that all the upper 32 bits are off 62 * 63 * 3. Clear the interrupt enable and interrupt state collection bits 64 * in the psr before updating the ipsr and iip. 65 * 66 * 4. Turn off the instruction, data and rse translation bits of the psr 67 * and store the new value into ipsr 68 * Also make sure that the interrupts are disabled. 69 * Ensure that we are in little endian mode. 70 * [psr.{rt, it, dt, i, be} = 0] 71 * 72 * 5. Get the physical address corresponding to the virtual address 73 * of the next instruction bundle and put it in iip. 74 * (Using magic numbers 24 and 40 in the deposint instruction since 75 * the IA64_SDK code directly maps to lower 24bits as physical address 76 * from a virtual address). 77 * 78 * 6. Do an rfi to move the values from ipsr to psr and iip to ip. 79 */ 80#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ 81 mov old_psr = psr; \ 82 ;; \ 83 dep old_psr = 0, old_psr, 32, 32; \ 84 \ 85 mov ar.rsc = 0 ; \ 86 ;; \ 87 srlz.d; \ 88 mov temp2 = ar.bspstore; \ 89 ;; \ 90 DATA_VA_TO_PA(temp2); \ 91 ;; \ 92 mov temp1 = ar.rnat; \ 93 ;; \ 94 mov ar.bspstore = temp2; \ 95 ;; \ 96 mov ar.rnat = temp1; \ 97 mov temp1 = psr; \ 98 mov temp2 = psr; \ 99 ;; \ 100 \ 101 dep temp2 = 0, temp2, PSR_IC, 2; \ 102 ;; \ 103 mov psr.l = temp2; \ 104 ;; \ 105 srlz.d; \ 106 dep temp1 = 0, temp1, 32, 32; \ 107 ;; \ 108 dep temp1 = 0, temp1, PSR_IT, 1; \ 109 ;; \ 110 dep temp1 = 0, temp1, PSR_DT, 1; \ 111 ;; \ 112 dep temp1 = 0, temp1, PSR_RT, 1; \ 113 ;; \ 114 dep temp1 = 0, temp1, PSR_I, 1; \ 115 ;; \ 116 dep temp1 = 0, temp1, PSR_IC, 1; \ 117 ;; \ 118 dep temp1 = -1, temp1, PSR_MC, 1; \ 119 ;; \ 120 mov cr.ipsr = temp1; \ 121 ;; \ 122 LOAD_PHYSICAL(p0, temp2, start_addr); \ 123 ;; \ 124 mov cr.iip = temp2; \ 125 mov cr.ifs = r0; \ 126 DATA_VA_TO_PA(sp); \ 127 DATA_VA_TO_PA(gp); \ 128 ;; \ 129 srlz.i; \ 130 ;; \ 131 nop 1; \ 132 nop 2; \ 133 nop 1; \ 134 nop 2; \ 135 rfi; \ 136 ;; 137 138/* 139 * This macro jumps to the instruction at the given virtual address 140 * and starts execution in virtual mode with all the address 141 * translations turned on. 142 * 1. Get the old saved psr 143 * 144 * 2. Clear the interrupt state collection bit in the current psr. 145 * 146 * 3. Set the instruction translation bit back in the old psr 147 * Note we have to do this since we are right now saving only the 148 * lower 32-bits of old psr.(Also the old psr has the data and 149 * rse translation bits on) 150 * 151 * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1. 152 * 153 * 5. Reset the current thread pointer (r13). 154 * 155 * 6. Set iip to the virtual address of the next instruction bundle. 156 * 157 * 7. Do an rfi to move ipsr to psr and iip to ip. 158 */ 159 160#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ 161 mov temp2 = psr; \ 162 ;; \ 163 mov old_psr = temp2; \ 164 ;; \ 165 dep temp2 = 0, temp2, PSR_IC, 2; \ 166 ;; \ 167 mov psr.l = temp2; \ 168 mov ar.rsc = 0; \ 169 ;; \ 170 srlz.d; \ 171 mov r13 = ar.k6; \ 172 mov temp2 = ar.bspstore; \ 173 ;; \ 174 DATA_PA_TO_VA(temp2,temp1); \ 175 ;; \ 176 mov temp1 = ar.rnat; \ 177 ;; \ 178 mov ar.bspstore = temp2; \ 179 ;; \ 180 mov ar.rnat = temp1; \ 181 ;; \ 182 mov temp1 = old_psr; \ 183 ;; \ 184 mov temp2 = 1; \ 185 ;; \ 186 dep temp1 = temp2, temp1, PSR_IC, 1; \ 187 ;; \ 188 dep temp1 = temp2, temp1, PSR_IT, 1; \ 189 ;; \ 190 dep temp1 = temp2, temp1, PSR_DT, 1; \ 191 ;; \ 192 dep temp1 = temp2, temp1, PSR_RT, 1; \ 193 ;; \ 194 dep temp1 = temp2, temp1, PSR_BN, 1; \ 195 ;; \ 196 \ 197 mov cr.ipsr = temp1; \ 198 movl temp2 = start_addr; \ 199 ;; \ 200 mov cr.iip = temp2; \ 201 movl gp = __gp \ 202 ;; \ 203 DATA_PA_TO_VA(sp, temp1); \ 204 srlz.i; \ 205 ;; \ 206 nop 1; \ 207 nop 2; \ 208 nop 1; \ 209 rfi \ 210 ;; 211 212/* 213 * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel 214 * stacks, except that the SAL/OS state and a switch_stack are stored near the 215 * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as 216 * well as MCA over INIT, each event needs its own SAL/OS state. All entries 217 * are 16 byte aligned. 218 * 219 * +---------------------------+ 220 * | pt_regs | 221 * +---------------------------+ 222 * | switch_stack | 223 * +---------------------------+ 224 * | SAL/OS state | 225 * +---------------------------+ 226 * | 16 byte scratch area | 227 * +---------------------------+ <-------- SP at start of C MCA handler 228 * | ..... | 229 * +---------------------------+ 230 * | RBS for MCA/INIT handler | 231 * +---------------------------+ 232 * | struct task for MCA/INIT | 233 * +---------------------------+ <-------- Bottom of MCA/INIT stack 234 */ 235 236#define ALIGN16(x) ((x)&~15) 237#define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE) 238#define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE) 239#define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE) 240#define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16) 241 242#endif /* _ASM_IA64_MCA_ASM_H */ 243