• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /asuswrt-rt-n18u-9.0.0.4.380.2695/release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/acpi/acpica/
1/******************************************************************************
2 *
3 * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes)
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2010, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions, and the following disclaimer,
16 *    without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 *    substantially similar to the "NO WARRANTY" disclaimer below
19 *    ("Disclaimer") and any redistribution must be conditioned upon
20 *    including a substantially similar Disclaimer requirement for further
21 *    binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 *    of any contributors may be used to endorse or promote products derived
24 *    from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "actables.h"
49#include "acdispat.h"
50#include "acevents.h"
51
52#define _COMPONENT          ACPI_EXECUTER
53ACPI_MODULE_NAME("exconfig")
54
55/* Local prototypes */
56static acpi_status
57acpi_ex_add_table(u32 table_index,
58		  struct acpi_namespace_node *parent_node,
59		  union acpi_operand_object **ddb_handle);
60
61static acpi_status
62acpi_ex_region_read(union acpi_operand_object *obj_desc,
63		    u32 length, u8 *buffer);
64
65/*******************************************************************************
66 *
67 * FUNCTION:    acpi_ex_add_table
68 *
69 * PARAMETERS:  Table               - Pointer to raw table
70 *              parent_node         - Where to load the table (scope)
71 *              ddb_handle          - Where to return the table handle.
72 *
73 * RETURN:      Status
74 *
75 * DESCRIPTION: Common function to Install and Load an ACPI table with a
76 *              returned table handle.
77 *
78 ******************************************************************************/
79
80static acpi_status
81acpi_ex_add_table(u32 table_index,
82		  struct acpi_namespace_node *parent_node,
83		  union acpi_operand_object **ddb_handle)
84{
85	union acpi_operand_object *obj_desc;
86	acpi_status status;
87	acpi_owner_id owner_id;
88
89	ACPI_FUNCTION_TRACE(ex_add_table);
90
91	/* Create an object to be the table handle */
92
93	obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE);
94	if (!obj_desc) {
95		return_ACPI_STATUS(AE_NO_MEMORY);
96	}
97
98	/* Init the table handle */
99
100	obj_desc->common.flags |= AOPOBJ_DATA_VALID;
101	obj_desc->reference.class = ACPI_REFCLASS_TABLE;
102	*ddb_handle = obj_desc;
103
104	/* Install the new table into the local data structures */
105
106	obj_desc->reference.value = table_index;
107
108	/* Add the table to the namespace */
109
110	status = acpi_ns_load_table(table_index, parent_node);
111	if (ACPI_FAILURE(status)) {
112		acpi_ut_remove_reference(obj_desc);
113		*ddb_handle = NULL;
114		return_ACPI_STATUS(status);
115	}
116
117	/* Execute any module-level code that was found in the table */
118
119	acpi_ex_exit_interpreter();
120	acpi_ns_exec_module_code_list();
121	acpi_ex_enter_interpreter();
122
123	/* Update GPEs for any new _Lxx/_Exx methods. Ignore errors */
124
125	status = acpi_tb_get_owner_id(table_index, &owner_id);
126	if (ACPI_SUCCESS(status)) {
127		acpi_ev_update_gpes(owner_id);
128	}
129
130	return_ACPI_STATUS(AE_OK);
131}
132
133/*******************************************************************************
134 *
135 * FUNCTION:    acpi_ex_load_table_op
136 *
137 * PARAMETERS:  walk_state          - Current state with operands
138 *              return_desc         - Where to store the return object
139 *
140 * RETURN:      Status
141 *
142 * DESCRIPTION: Load an ACPI table from the RSDT/XSDT
143 *
144 ******************************************************************************/
145
146acpi_status
147acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
148		      union acpi_operand_object **return_desc)
149{
150	acpi_status status;
151	union acpi_operand_object **operand = &walk_state->operands[0];
152	struct acpi_namespace_node *parent_node;
153	struct acpi_namespace_node *start_node;
154	struct acpi_namespace_node *parameter_node = NULL;
155	union acpi_operand_object *ddb_handle;
156	struct acpi_table_header *table;
157	u32 table_index;
158
159	ACPI_FUNCTION_TRACE(ex_load_table_op);
160
161	/* Validate lengths for the signature_string, OEMIDString, OEMtable_iD */
162
163	if ((operand[0]->string.length > ACPI_NAME_SIZE) ||
164	    (operand[1]->string.length > ACPI_OEM_ID_SIZE) ||
165	    (operand[2]->string.length > ACPI_OEM_TABLE_ID_SIZE)) {
166		return_ACPI_STATUS(AE_BAD_PARAMETER);
167	}
168
169	/* Find the ACPI table in the RSDT/XSDT */
170
171	status = acpi_tb_find_table(operand[0]->string.pointer,
172				    operand[1]->string.pointer,
173				    operand[2]->string.pointer, &table_index);
174	if (ACPI_FAILURE(status)) {
175		if (status != AE_NOT_FOUND) {
176			return_ACPI_STATUS(status);
177		}
178
179		/* Table not found, return an Integer=0 and AE_OK */
180
181		ddb_handle = acpi_ut_create_integer_object((u64) 0);
182		if (!ddb_handle) {
183			return_ACPI_STATUS(AE_NO_MEMORY);
184		}
185
186		*return_desc = ddb_handle;
187		return_ACPI_STATUS(AE_OK);
188	}
189
190	/* Default nodes */
191
192	start_node = walk_state->scope_info->scope.node;
193	parent_node = acpi_gbl_root_node;
194
195	/* root_path (optional parameter) */
196
197	if (operand[3]->string.length > 0) {
198		/*
199		 * Find the node referenced by the root_path_string. This is the
200		 * location within the namespace where the table will be loaded.
201		 */
202		status =
203		    acpi_ns_get_node(start_node, operand[3]->string.pointer,
204				     ACPI_NS_SEARCH_PARENT, &parent_node);
205		if (ACPI_FAILURE(status)) {
206			return_ACPI_STATUS(status);
207		}
208	}
209
210	/* parameter_path (optional parameter) */
211
212	if (operand[4]->string.length > 0) {
213		if ((operand[4]->string.pointer[0] != '\\') &&
214		    (operand[4]->string.pointer[0] != '^')) {
215			/*
216			 * Path is not absolute, so it will be relative to the node
217			 * referenced by the root_path_string (or the NS root if omitted)
218			 */
219			start_node = parent_node;
220		}
221
222		/* Find the node referenced by the parameter_path_string */
223
224		status =
225		    acpi_ns_get_node(start_node, operand[4]->string.pointer,
226				     ACPI_NS_SEARCH_PARENT, &parameter_node);
227		if (ACPI_FAILURE(status)) {
228			return_ACPI_STATUS(status);
229		}
230	}
231
232	/* Load the table into the namespace */
233
234	status = acpi_ex_add_table(table_index, parent_node, &ddb_handle);
235	if (ACPI_FAILURE(status)) {
236		return_ACPI_STATUS(status);
237	}
238
239	/* Parameter Data (optional) */
240
241	if (parameter_node) {
242
243		/* Store the parameter data into the optional parameter object */
244
245		status = acpi_ex_store(operand[5],
246				       ACPI_CAST_PTR(union acpi_operand_object,
247						     parameter_node),
248				       walk_state);
249		if (ACPI_FAILURE(status)) {
250			(void)acpi_ex_unload_table(ddb_handle);
251
252			acpi_ut_remove_reference(ddb_handle);
253			return_ACPI_STATUS(status);
254		}
255	}
256
257	status = acpi_get_table_by_index(table_index, &table);
258	if (ACPI_SUCCESS(status)) {
259		ACPI_INFO((AE_INFO, "Dynamic OEM Table Load:"));
260		acpi_tb_print_table_header(0, table);
261	}
262
263	/* Invoke table handler if present */
264
265	if (acpi_gbl_table_handler) {
266		(void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table,
267					     acpi_gbl_table_handler_context);
268	}
269
270	*return_desc = ddb_handle;
271	return_ACPI_STATUS(status);
272}
273
274/*******************************************************************************
275 *
276 * FUNCTION:    acpi_ex_region_read
277 *
278 * PARAMETERS:  obj_desc        - Region descriptor
279 *              Length          - Number of bytes to read
280 *              Buffer          - Pointer to where to put the data
281 *
282 * RETURN:      Status
283 *
284 * DESCRIPTION: Read data from an operation region. The read starts from the
285 *              beginning of the region.
286 *
287 ******************************************************************************/
288
289static acpi_status
290acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer)
291{
292	acpi_status status;
293	u64 value;
294	u32 region_offset = 0;
295	u32 i;
296
297	/* Bytewise reads */
298
299	for (i = 0; i < length; i++) {
300		status = acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
301							region_offset, 8,
302							&value);
303		if (ACPI_FAILURE(status)) {
304			return status;
305		}
306
307		*buffer = (u8)value;
308		buffer++;
309		region_offset++;
310	}
311
312	return AE_OK;
313}
314
315/*******************************************************************************
316 *
317 * FUNCTION:    acpi_ex_load_op
318 *
319 * PARAMETERS:  obj_desc        - Region or Buffer/Field where the table will be
320 *                                obtained
321 *              Target          - Where a handle to the table will be stored
322 *              walk_state      - Current state
323 *
324 * RETURN:      Status
325 *
326 * DESCRIPTION: Load an ACPI table from a field or operation region
327 *
328 * NOTE: Region Fields (Field, bank_field, index_fields) are resolved to buffer
329 *       objects before this code is reached.
330 *
331 *       If source is an operation region, it must refer to system_memory, as
332 *       per the ACPI specification.
333 *
334 ******************************************************************************/
335
336acpi_status
337acpi_ex_load_op(union acpi_operand_object *obj_desc,
338		union acpi_operand_object *target,
339		struct acpi_walk_state *walk_state)
340{
341	union acpi_operand_object *ddb_handle;
342	struct acpi_table_header *table;
343	struct acpi_table_desc table_desc;
344	u32 table_index;
345	acpi_status status;
346	u32 length;
347
348	ACPI_FUNCTION_TRACE(ex_load_op);
349
350	ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
351
352	/* Source Object can be either an op_region or a Buffer/Field */
353
354	switch (obj_desc->common.type) {
355	case ACPI_TYPE_REGION:
356
357		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
358				  "Load table from Region %p\n", obj_desc));
359
360		/* Region must be system_memory (from ACPI spec) */
361
362		if (obj_desc->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
363			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
364		}
365
366		/*
367		 * If the Region Address and Length have not been previously evaluated,
368		 * evaluate them now and save the results.
369		 */
370		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
371			status = acpi_ds_get_region_arguments(obj_desc);
372			if (ACPI_FAILURE(status)) {
373				return_ACPI_STATUS(status);
374			}
375		}
376
377		/* Get the table header first so we can get the table length */
378
379		table = ACPI_ALLOCATE(sizeof(struct acpi_table_header));
380		if (!table) {
381			return_ACPI_STATUS(AE_NO_MEMORY);
382		}
383
384		status =
385		    acpi_ex_region_read(obj_desc,
386					sizeof(struct acpi_table_header),
387					ACPI_CAST_PTR(u8, table));
388		length = table->length;
389		ACPI_FREE(table);
390
391		if (ACPI_FAILURE(status)) {
392			return_ACPI_STATUS(status);
393		}
394
395		/* Must have at least an ACPI table header */
396
397		if (length < sizeof(struct acpi_table_header)) {
398			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
399		}
400
401		/*
402		 * The original implementation simply mapped the table, with no copy.
403		 * However, the memory region is not guaranteed to remain stable and
404		 * we must copy the table to a local buffer. For example, the memory
405		 * region is corrupted after suspend on some machines. Dynamically
406		 * loaded tables are usually small, so this overhead is minimal.
407		 *
408		 * The latest implementation (5/2009) does not use a mapping at all.
409		 * We use the low-level operation region interface to read the table
410		 * instead of the obvious optimization of using a direct mapping.
411		 * This maintains a consistent use of operation regions across the
412		 * entire subsystem. This is important if additional processing must
413		 * be performed in the (possibly user-installed) operation region
414		 * handler. For example, acpi_exec and ASLTS depend on this.
415		 */
416
417		/* Allocate a buffer for the table */
418
419		table_desc.pointer = ACPI_ALLOCATE(length);
420		if (!table_desc.pointer) {
421			return_ACPI_STATUS(AE_NO_MEMORY);
422		}
423
424		/* Read the entire table */
425
426		status = acpi_ex_region_read(obj_desc, length,
427					     ACPI_CAST_PTR(u8,
428							   table_desc.pointer));
429		if (ACPI_FAILURE(status)) {
430			ACPI_FREE(table_desc.pointer);
431			return_ACPI_STATUS(status);
432		}
433
434		table_desc.address = obj_desc->region.address;
435		break;
436
437	case ACPI_TYPE_BUFFER:	/* Buffer or resolved region_field */
438
439		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
440				  "Load table from Buffer or Field %p\n",
441				  obj_desc));
442
443		/* Must have at least an ACPI table header */
444
445		if (obj_desc->buffer.length < sizeof(struct acpi_table_header)) {
446			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
447		}
448
449		/* Get the actual table length from the table header */
450
451		table =
452		    ACPI_CAST_PTR(struct acpi_table_header,
453				  obj_desc->buffer.pointer);
454		length = table->length;
455
456		/* Table cannot extend beyond the buffer */
457
458		if (length > obj_desc->buffer.length) {
459			return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
460		}
461		if (length < sizeof(struct acpi_table_header)) {
462			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
463		}
464
465		/*
466		 * Copy the table from the buffer because the buffer could be modified
467		 * or even deleted in the future
468		 */
469		table_desc.pointer = ACPI_ALLOCATE(length);
470		if (!table_desc.pointer) {
471			return_ACPI_STATUS(AE_NO_MEMORY);
472		}
473
474		ACPI_MEMCPY(table_desc.pointer, table, length);
475		table_desc.address = ACPI_TO_INTEGER(table_desc.pointer);
476		break;
477
478	default:
479		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
480	}
481
482	/* Validate table checksum (will not get validated in tb_add_table) */
483
484	status = acpi_tb_verify_checksum(table_desc.pointer, length);
485	if (ACPI_FAILURE(status)) {
486		ACPI_FREE(table_desc.pointer);
487		return_ACPI_STATUS(status);
488	}
489
490	/* Complete the table descriptor */
491
492	table_desc.length = length;
493	table_desc.flags = ACPI_TABLE_ORIGIN_ALLOCATED;
494
495	/* Install the new table into the local data structures */
496
497	status = acpi_tb_add_table(&table_desc, &table_index);
498	if (ACPI_FAILURE(status)) {
499
500		/* Delete allocated table buffer */
501
502		acpi_tb_delete_table(&table_desc);
503		return_ACPI_STATUS(status);
504	}
505
506	/*
507	 * Add the table to the namespace.
508	 *
509	 * Note: Load the table objects relative to the root of the namespace.
510	 * This appears to go against the ACPI specification, but we do it for
511	 * compatibility with other ACPI implementations.
512	 */
513	status =
514	    acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle);
515	if (ACPI_FAILURE(status)) {
516
517		/* On error, table_ptr was deallocated above */
518
519		return_ACPI_STATUS(status);
520	}
521
522	/* Store the ddb_handle into the Target operand */
523
524	status = acpi_ex_store(ddb_handle, target, walk_state);
525	if (ACPI_FAILURE(status)) {
526		(void)acpi_ex_unload_table(ddb_handle);
527
528		/* table_ptr was deallocated above */
529
530		acpi_ut_remove_reference(ddb_handle);
531		return_ACPI_STATUS(status);
532	}
533
534	ACPI_INFO((AE_INFO, "Dynamic OEM Table Load:"));
535	acpi_tb_print_table_header(0, table_desc.pointer);
536
537	/* Remove the reference by added by acpi_ex_store above */
538
539	acpi_ut_remove_reference(ddb_handle);
540
541	/* Invoke table handler if present */
542
543	if (acpi_gbl_table_handler) {
544		(void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD,
545					     table_desc.pointer,
546					     acpi_gbl_table_handler_context);
547	}
548
549	return_ACPI_STATUS(status);
550}
551
552/*******************************************************************************
553 *
554 * FUNCTION:    acpi_ex_unload_table
555 *
556 * PARAMETERS:  ddb_handle          - Handle to a previously loaded table
557 *
558 * RETURN:      Status
559 *
560 * DESCRIPTION: Unload an ACPI table
561 *
562 ******************************************************************************/
563
564acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
565{
566	acpi_status status = AE_OK;
567	union acpi_operand_object *table_desc = ddb_handle;
568	u32 table_index;
569	struct acpi_table_header *table;
570
571	ACPI_FUNCTION_TRACE(ex_unload_table);
572
573	/*
574	 * Validate the handle
575	 * Although the handle is partially validated in acpi_ex_reconfiguration()
576	 * when it calls acpi_ex_resolve_operands(), the handle is more completely
577	 * validated here.
578	 *
579	 * Handle must be a valid operand object of type reference. Also, the
580	 * ddb_handle must still be marked valid (table has not been previously
581	 * unloaded)
582	 */
583	if ((!ddb_handle) ||
584	    (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) ||
585	    (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) ||
586	    (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) {
587		return_ACPI_STATUS(AE_BAD_PARAMETER);
588	}
589
590	/* Get the table index from the ddb_handle */
591
592	table_index = table_desc->reference.value;
593
594	/* Ensure the table is still loaded */
595
596	if (!acpi_tb_is_table_loaded(table_index)) {
597		return_ACPI_STATUS(AE_NOT_EXIST);
598	}
599
600	/* Invoke table handler if present */
601
602	if (acpi_gbl_table_handler) {
603		status = acpi_get_table_by_index(table_index, &table);
604		if (ACPI_SUCCESS(status)) {
605			(void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD,
606						     table,
607						     acpi_gbl_table_handler_context);
608		}
609	}
610
611	/* Delete the portion of the namespace owned by this table */
612
613	status = acpi_tb_delete_namespace_by_owner(table_index);
614	if (ACPI_FAILURE(status)) {
615		return_ACPI_STATUS(status);
616	}
617
618	(void)acpi_tb_release_owner_id(table_index);
619	acpi_tb_set_table_loaded_flag(table_index, FALSE);
620
621	/*
622	 * Invalidate the handle. We do this because the handle may be stored
623	 * in a named object and may not be actually deleted until much later.
624	 */
625	ddb_handle->common.flags &= ~AOPOBJ_DATA_VALID;
626	return_ACPI_STATUS(AE_OK);
627}
628