1/* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> 7 */ 8 9#include <linux/types.h> 10#include <linux/pci.h> 11#include <linux/kernel.h> 12#include <linux/init.h> 13#include <asm/bootinfo.h> 14 15#include "pci-bcm63xx.h" 16 17/* 18 * Allow PCI to be disabled at runtime depending on board nvram 19 * configuration 20 */ 21int bcm63xx_pci_enabled; 22 23static struct resource bcm_pci_mem_resource = { 24 .name = "bcm63xx PCI memory space", 25 .start = BCM_PCI_MEM_BASE_PA, 26 .end = BCM_PCI_MEM_END_PA, 27 .flags = IORESOURCE_MEM 28}; 29 30static struct resource bcm_pci_io_resource = { 31 .name = "bcm63xx PCI IO space", 32 .start = BCM_PCI_IO_BASE_PA, 33#ifdef CONFIG_CARDBUS 34 .end = BCM_PCI_IO_HALF_PA, 35#else 36 .end = BCM_PCI_IO_END_PA, 37#endif 38 .flags = IORESOURCE_IO 39}; 40 41struct pci_controller bcm63xx_controller = { 42 .pci_ops = &bcm63xx_pci_ops, 43 .io_resource = &bcm_pci_io_resource, 44 .mem_resource = &bcm_pci_mem_resource, 45}; 46 47/* 48 * We handle cardbus via a fake Cardbus bridge, memory and io spaces 49 * have to be clearly separated from PCI one since we have different 50 * memory decoder. 51 */ 52#ifdef CONFIG_CARDBUS 53static struct resource bcm_cb_mem_resource = { 54 .name = "bcm63xx Cardbus memory space", 55 .start = BCM_CB_MEM_BASE_PA, 56 .end = BCM_CB_MEM_END_PA, 57 .flags = IORESOURCE_MEM 58}; 59 60static struct resource bcm_cb_io_resource = { 61 .name = "bcm63xx Cardbus IO space", 62 .start = BCM_PCI_IO_HALF_PA + 1, 63 .end = BCM_PCI_IO_END_PA, 64 .flags = IORESOURCE_IO 65}; 66 67struct pci_controller bcm63xx_cb_controller = { 68 .pci_ops = &bcm63xx_cb_ops, 69 .io_resource = &bcm_cb_io_resource, 70 .mem_resource = &bcm_cb_mem_resource, 71}; 72#endif 73 74static u32 bcm63xx_int_cfg_readl(u32 reg) 75{ 76 u32 tmp; 77 78 tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; 79 tmp |= MPI_PCICFGCTL_WRITEEN_MASK; 80 bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); 81 iob(); 82 return bcm_mpi_readl(MPI_PCICFGDATA_REG); 83} 84 85static void bcm63xx_int_cfg_writel(u32 val, u32 reg) 86{ 87 u32 tmp; 88 89 tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; 90 tmp |= MPI_PCICFGCTL_WRITEEN_MASK; 91 bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); 92 bcm_mpi_writel(val, MPI_PCICFGDATA_REG); 93} 94 95void __iomem *pci_iospace_start; 96 97static int __init bcm63xx_pci_init(void) 98{ 99 unsigned int mem_size; 100 u32 val; 101 102 if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) 103 return -ENODEV; 104 105 if (!bcm63xx_pci_enabled) 106 return -ENODEV; 107 108 /* 109 * configuration access are done through IO space, remap 4 110 * first bytes to access it from CPU. 111 * 112 * this means that no io access from CPU should happen while 113 * we do a configuration cycle, but there's no way we can add 114 * a spinlock for each io access, so this is currently kind of 115 * broken on SMP. 116 */ 117 pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); 118 if (!pci_iospace_start) 119 return -ENOMEM; 120 121 /* setup local bus to PCI access (PCI memory) */ 122 val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; 123 bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); 124 bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); 125 bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); 126 127 /* set Cardbus IDSEL (type 0 cfg access on primary bus for 128 * this IDSEL will be done on Cardbus instead) */ 129 val = bcm_pcmcia_readl(PCMCIA_C1_REG); 130 val &= ~PCMCIA_C1_CBIDSEL_MASK; 131 val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); 132 bcm_pcmcia_writel(val, PCMCIA_C1_REG); 133 134#ifdef CONFIG_CARDBUS 135 /* setup local bus to PCI access (Cardbus memory) */ 136 val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; 137 bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); 138 bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); 139 val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; 140 bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); 141#else 142 /* disable second access windows */ 143 bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); 144#endif 145 146 /* setup local bus to PCI access (IO memory), we have only 1 147 * IO window for both PCI and cardbus, but it cannot handle 148 * both at the same time, assume standard PCI for now, if 149 * cardbus card has IO zone, PCI fixup will change window to 150 * cardbus */ 151 val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; 152 bcm_mpi_writel(val, MPI_L2PIOBASE_REG); 153 bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); 154 bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); 155 156 /* enable PCI related GPIO pins */ 157 bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); 158 159 /* setup PCI to local bus access, used by PCI device to target 160 * local RAM while bus mastering */ 161 bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); 162 if (BCMCPU_IS_6358()) 163 val = MPI_SP0_REMAP_ENABLE_MASK; 164 else 165 val = 0; 166 bcm_mpi_writel(val, MPI_SP0_REMAP_REG); 167 168 bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); 169 bcm_mpi_writel(0, MPI_SP1_REMAP_REG); 170 171 mem_size = bcm63xx_get_memory_size(); 172 173 /* 6348 before rev b0 exposes only 16 MB of RAM memory through 174 * PCI, throw a warning if we have more memory */ 175 if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { 176 if (mem_size > (16 * 1024 * 1024)) 177 printk(KERN_WARNING "bcm63xx: this CPU " 178 "revision cannot handle more than 16MB " 179 "of RAM for PCI bus mastering\n"); 180 } else { 181 /* setup sp0 range to local RAM size */ 182 bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); 183 bcm_mpi_writel(0, MPI_SP1_RANGE_REG); 184 } 185 186 /* change host bridge retry counter to infinite number of 187 * retry, needed for some broadcom wifi cards with Silicon 188 * Backplane bus where access to srom seems very slow */ 189 val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); 190 val &= ~REG_TIMER_RETRY_MASK; 191 bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); 192 193 /* enable memory decoder and bus mastering */ 194 val = bcm63xx_int_cfg_readl(PCI_COMMAND); 195 val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 196 bcm63xx_int_cfg_writel(val, PCI_COMMAND); 197 198 /* enable read prefetching & disable byte swapping for bus 199 * mastering transfers */ 200 val = bcm_mpi_readl(MPI_PCIMODESEL_REG); 201 val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; 202 val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; 203 val &= ~MPI_PCIMODESEL_PREFETCH_MASK; 204 val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); 205 bcm_mpi_writel(val, MPI_PCIMODESEL_REG); 206 207 /* enable pci interrupt */ 208 val = bcm_mpi_readl(MPI_LOCINT_REG); 209 val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); 210 bcm_mpi_writel(val, MPI_LOCINT_REG); 211 212 register_pci_controller(&bcm63xx_controller); 213 214#ifdef CONFIG_CARDBUS 215 register_pci_controller(&bcm63xx_cb_controller); 216#endif 217 218 /* mark memory space used for IO mapping as reserved */ 219 request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, 220 "bcm63xx PCI IO space"); 221 return 0; 222} 223 224arch_initcall(bcm63xx_pci_init); 225