1/* 2 * arch/arm/plat-orion/gpio.c 3 * 4 * Marvell Orion SoC GPIO handling. 5 * 6 * This file is licensed under the terms of the GNU General Public 7 * License version 2. This program is licensed "as is" without any 8 * warranty of any kind, whether express or implied. 9 */ 10 11#include <linux/kernel.h> 12#include <linux/init.h> 13#include <linux/irq.h> 14#include <linux/module.h> 15#include <linux/spinlock.h> 16#include <linux/bitops.h> 17#include <linux/io.h> 18#include <linux/gpio.h> 19 20static DEFINE_SPINLOCK(gpio_lock); 21static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; 22static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)]; 23 24static inline void __set_direction(unsigned pin, int input) 25{ 26 u32 u; 27 28 u = readl(GPIO_IO_CONF(pin)); 29 if (input) 30 u |= 1 << (pin & 31); 31 else 32 u &= ~(1 << (pin & 31)); 33 writel(u, GPIO_IO_CONF(pin)); 34} 35 36static void __set_level(unsigned pin, int high) 37{ 38 u32 u; 39 40 u = readl(GPIO_OUT(pin)); 41 if (high) 42 u |= 1 << (pin & 31); 43 else 44 u &= ~(1 << (pin & 31)); 45 writel(u, GPIO_OUT(pin)); 46} 47 48static inline void __set_blinking(unsigned pin, int blink) 49{ 50 u32 u; 51 52 u = readl(GPIO_BLINK_EN(pin)); 53 if (blink) 54 u |= 1 << (pin & 31); 55 else 56 u &= ~(1 << (pin & 31)); 57 writel(u, GPIO_BLINK_EN(pin)); 58} 59 60static inline int orion_gpio_is_valid(unsigned pin, int mode) 61{ 62 if (pin < GPIO_MAX) { 63 if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input)) 64 goto err_out; 65 if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output)) 66 goto err_out; 67 return true; 68 } 69 70err_out: 71 pr_debug("%s: invalid GPIO %d\n", __func__, pin); 72 return false; 73} 74 75/* 76 * GENERIC_GPIO primitives. 77 */ 78static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) 79{ 80 unsigned long flags; 81 82 if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK)) 83 return -EINVAL; 84 85 spin_lock_irqsave(&gpio_lock, flags); 86 87 /* Configure GPIO direction. */ 88 __set_direction(pin, 1); 89 90 spin_unlock_irqrestore(&gpio_lock, flags); 91 92 return 0; 93} 94 95static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin) 96{ 97 int val; 98 99 if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31))) 100 val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin)); 101 else 102 val = readl(GPIO_OUT(pin)); 103 104 return (val >> (pin & 31)) & 1; 105} 106 107static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, 108 int value) 109{ 110 unsigned long flags; 111 112 if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) 113 return -EINVAL; 114 115 spin_lock_irqsave(&gpio_lock, flags); 116 117 /* Disable blinking. */ 118 __set_blinking(pin, 0); 119 120 /* Configure GPIO output value. */ 121 __set_level(pin, value); 122 123 /* Configure GPIO direction. */ 124 __set_direction(pin, 0); 125 126 spin_unlock_irqrestore(&gpio_lock, flags); 127 128 return 0; 129} 130 131static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin, 132 int value) 133{ 134 unsigned long flags; 135 136 spin_lock_irqsave(&gpio_lock, flags); 137 138 /* Configure GPIO output value. */ 139 __set_level(pin, value); 140 141 spin_unlock_irqrestore(&gpio_lock, flags); 142} 143 144static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) 145{ 146 if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) || 147 orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) 148 return 0; 149 return -EINVAL; 150} 151 152static struct gpio_chip orion_gpiochip = { 153 .label = "orion_gpio", 154 .direction_input = orion_gpio_direction_input, 155 .get = orion_gpio_get_value, 156 .direction_output = orion_gpio_direction_output, 157 .set = orion_gpio_set_value, 158 .request = orion_gpio_request, 159 .base = 0, 160 .ngpio = GPIO_MAX, 161 .can_sleep = 0, 162}; 163 164void __init orion_gpio_init(void) 165{ 166 gpiochip_add(&orion_gpiochip); 167} 168 169/* 170 * Orion-specific GPIO API extensions. 171 */ 172void __init orion_gpio_set_unused(unsigned pin) 173{ 174 /* Configure as output, drive low. */ 175 __set_level(pin, 0); 176 __set_direction(pin, 0); 177} 178 179void __init orion_gpio_set_valid(unsigned pin, int mode) 180{ 181 if (mode == 1) 182 mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK; 183 if (mode & GPIO_INPUT_OK) 184 __set_bit(pin, gpio_valid_input); 185 else 186 __clear_bit(pin, gpio_valid_input); 187 if (mode & GPIO_OUTPUT_OK) 188 __set_bit(pin, gpio_valid_output); 189 else 190 __clear_bit(pin, gpio_valid_output); 191} 192 193void orion_gpio_set_blink(unsigned pin, int blink) 194{ 195 unsigned long flags; 196 197 spin_lock_irqsave(&gpio_lock, flags); 198 199 /* Set output value to zero. */ 200 __set_level(pin, 0); 201 202 /* Set blinking. */ 203 __set_blinking(pin, blink); 204 205 spin_unlock_irqrestore(&gpio_lock, flags); 206} 207EXPORT_SYMBOL(orion_gpio_set_blink); 208 209 210/***************************************************************************** 211 * Orion GPIO IRQ 212 * 213 * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same 214 * value of the line or the opposite value. 215 * 216 * Level IRQ handlers: DATA_IN is used directly as cause register. 217 * Interrupt are masked by LEVEL_MASK registers. 218 * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. 219 * Interrupt are masked by EDGE_MASK registers. 220 * Both-edge handlers: Similar to regular Edge handlers, but also swaps 221 * the polarity to catch the next line transaction. 222 * This is a race condition that might not perfectly 223 * work on some use cases. 224 * 225 * Every eight GPIO lines are grouped (OR'ed) before going up to main 226 * cause register. 227 * 228 * EDGE cause mask 229 * data-in /--------| |-----| |----\ 230 * -----| |----- ---- to main cause reg 231 * X \----------------| |----/ 232 * polarity LEVEL mask 233 * 234 ****************************************************************************/ 235 236static void gpio_irq_ack(u32 irq) 237{ 238 int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; 239 if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { 240 int pin = irq_to_gpio(irq); 241 writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin)); 242 } 243} 244 245static void gpio_irq_mask(u32 irq) 246{ 247 int pin = irq_to_gpio(irq); 248 int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; 249 u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? 250 GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); 251 u32 u = readl(reg); 252 u &= ~(1 << (pin & 31)); 253 writel(u, reg); 254} 255 256static void gpio_irq_unmask(u32 irq) 257{ 258 int pin = irq_to_gpio(irq); 259 int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK; 260 u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ? 261 GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin); 262 u32 u = readl(reg); 263 u |= 1 << (pin & 31); 264 writel(u, reg); 265} 266 267static int gpio_irq_set_type(u32 irq, u32 type) 268{ 269 int pin = irq_to_gpio(irq); 270 struct irq_desc *desc; 271 u32 u; 272 273 u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)); 274 if (!u) { 275 printk(KERN_ERR "orion gpio_irq_set_type failed " 276 "(irq %d, pin %d).\n", irq, pin); 277 return -EINVAL; 278 } 279 280 desc = irq_desc + irq; 281 282 /* 283 * Set edge/level type. 284 */ 285 if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { 286 desc->handle_irq = handle_edge_irq; 287 } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { 288 desc->handle_irq = handle_level_irq; 289 } else { 290 printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); 291 return -EINVAL; 292 } 293 294 /* 295 * Configure interrupt polarity. 296 */ 297 if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) { 298 u = readl(GPIO_IN_POL(pin)); 299 u &= ~(1 << (pin & 31)); 300 writel(u, GPIO_IN_POL(pin)); 301 } else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) { 302 u = readl(GPIO_IN_POL(pin)); 303 u |= 1 << (pin & 31); 304 writel(u, GPIO_IN_POL(pin)); 305 } else if (type == IRQ_TYPE_EDGE_BOTH) { 306 u32 v; 307 308 v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin)); 309 310 /* 311 * set initial polarity based on current input level 312 */ 313 u = readl(GPIO_IN_POL(pin)); 314 if (v & (1 << (pin & 31))) 315 u |= 1 << (pin & 31); /* falling */ 316 else 317 u &= ~(1 << (pin & 31)); /* rising */ 318 writel(u, GPIO_IN_POL(pin)); 319 } 320 321 desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type; 322 323 return 0; 324} 325 326struct irq_chip orion_gpio_irq_chip = { 327 .name = "orion_gpio_irq", 328 .ack = gpio_irq_ack, 329 .mask = gpio_irq_mask, 330 .unmask = gpio_irq_unmask, 331 .set_type = gpio_irq_set_type, 332}; 333 334void orion_gpio_irq_handler(int pinoff) 335{ 336 u32 cause; 337 int pin; 338 339 cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff)); 340 cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff)); 341 342 for (pin = pinoff; pin < pinoff + 8; pin++) { 343 int irq = gpio_to_irq(pin); 344 struct irq_desc *desc = irq_desc + irq; 345 346 if (!(cause & (1 << (pin & 31)))) 347 continue; 348 349 if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { 350 /* Swap polarity (race with GPIO line) */ 351 u32 polarity; 352 353 polarity = readl(GPIO_IN_POL(pin)); 354 polarity ^= 1 << (pin & 31); 355 writel(polarity, GPIO_IN_POL(pin)); 356 } 357 desc_handle_irq(irq, desc); 358 } 359} 360