1# Note that this file exists in Mandrake packaging cvs (as samba3.spec) 2# and samba cvs (as packaging/Mandrake/samba2.spec.tmpl). 3# Keep in mind that any changes should take both locations into account 4# Considerable effort has gone into making this possible, so that only 5# one spec file is maintained, please don't break it. 6# It should be possible, without any changes to this file, to build 7# binary packages on most recent Mandrake releases: 8# 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh' 9# 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh <ver>' 10# 3)using official source releases and updated Mandrake packaging, by 11# 'rpm -ba samba.spec' 12# As such, any sources or patches used in a build from a samba release or 13# cvs should be submitted for inclusion in samba cvs. 14 15%define pkg_name samba 16%define ver 3.0.1pre3 17%define rel 5mdk 18%define vscanver 0.3.3beta1 19%define libsmbmajor 0 20 21%{!?lib: %global lib lib} 22%{!?mklibname: %global mklibname(ds) %lib%{1}%{?2:%{2}}%{?3:_%{3}}%{-s:-static}%{-d:-devel}} 23 24%define libname %mklibname smbclient %libsmbmajor 25 26# Version and release replaced by samba-team at release from samba cvs 27%define pversion PVERSION 28%define prelease PRELEASE 29 30#Check to see if p(version|release) has been replaced (1 if replaced) 31%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) 32%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) 33 34%if %have_pversion 35%define source_ver %{pversion} 36# Don't abort for stupid reasons on builds from tarballs: 37%global _unpackaged_files_terminate_build 0 38%global _missing_doc_files_terminate_build 0 39%else 40%define source_ver %{ver} 41%endif 42 43# We might have a prerelease: 44%define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}') 45%if %have_pre 46%define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);') 47%define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g') 48%endif 49 50# Check to see if we are running a build from a tarball release from samba.org 51# (%have_pversion) If so, disable vscan, unless explicitly requested 52# (--with vscan). 53%define build_vscan 1 54%if %have_pversion 55%define build_vscan 0 56%{?_with_vscan: %define build_vscan 1} 57%endif 58 59# We now do detection of the Mandrake release we are building on: 60#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi) 61#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi) 62%define build_mdk100 %(if [ `awk '{print $4}' /etc/mandrake-release` = 10.0 ];then echo 1; else echo 0; fi) 63%define build_mdk92 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.2 ];then echo 1; else echo 0; fi) 64%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi) 65%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi) 66%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi) 67%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi) 68%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi) 69%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi) 70%define build_non_default 0 71 72# Default options 73%define build_alternatives 0 74%define build_system 0 75%define build_acl 1 76%define build_winbind 1 77%define build_wins 1 78%define build_ldap 0 79%define build_ads 1 80%define build_scanners 0 81# CUPS supports functionality for 'printcap name = cups' (9.0 and later): 82%define build_cupspc 0 83# %_{pre,postun}_service are provided by rpm-helper in 9.0 and later 84%define have_rpmhelper 1 85 86# Set defaults for each version 87%if %build_mdk100 88%define build_system 1 89%define build_alternatives 1 90%define build_cupspc 1 91%endif 92 93%if %build_mdk92 94%define build_alternatives 1 95%define build_cupspc 1 96%endif 97 98%if %build_mdk91 99%define build_cupspc 1 100%endif 101 102%if %build_mdk90 103%endif 104 105%if %build_mdk82 106%define have_rpmhelper 0 107%endif 108 109%if %build_mdk81 110%define build_winbind 0 111%define build_wins 0 112%define have_rpmhelper 0 113%endif 114 115%if %build_mdk80 116%define build_acl 0 117%define build_winbind 0 118%define build_wins 0 119%define build_ads 0 120%define have_rpmhelper 1 121%endif 122 123%if %build_mdk72 124%define build_acl 0 125%define build_winbind 0 126%define build_wins 0 127%define build_ads 0 128%define have_rpmhelper 1 129%endif 130 131 132# Allow commandline option overrides (borrowed from Vince's qmail srpm): 133# To use it, do rpm [-ba|--rebuild] --with 'xxx' 134# Check if the rpm was built with the defaults, otherwise we inform the user 135%define build_non_default 0 136%{?_with_system: %global build_system 1} 137%{?_without_system: %global build_system 0} 138%{?_with_acl: %global build_acl 1} 139%{?_with_acl: %global build_non_default 1} 140%{?_without_acl: %global build_acl 0} 141%{?_without_acl: %global build_non_default 1} 142%{?_with_winbind: %global build_winbind 1} 143%{?_with_winbind: %global build_non_default 1} 144%{?_without_winbind: %global build_winbind 0} 145%{?_without_winbind: %global build_non_default 1} 146%{?_with_wins: %global build_wins 1} 147%{?_with_wins: %global build_non_default 1} 148%{?_without_wins: %global build_wins 0} 149%{?_without_wins: %global build_non_default 1} 150%{?_with_ldap: %global build_ldap 1} 151%{?_with_ldap: %global build_non_default 1} 152%{?_without_ldap: %global build_ldap 0} 153%{?_without_ldap: %global build_non_default 1} 154%{?_with_ads: %global build_ads 1} 155%{?_with_ads: %global build_non_default 1} 156%{?_without_ads: %global build_ads 0} 157%{?_without_ads: %global build_non_default 1} 158%{?_with_scanners: %global build_scanners 1} 159%{?_with_scanners: %global build_non_default 1} 160 161# As if that weren't enough, we're going to try building with antivirus 162# support as an option also 163%define build_fprot 0 164%define build_kaspersky 0 165%define build_mks 0 166%define build_openav 0 167%define build_sophos 0 168%define build_symantec 0 169%define build_trend 0 170%if %build_vscan && %build_scanners 171#These can be enabled here by default 172# (kaspersky requires their library present) 173%define build_fprot 1 174%define build_mks 1 175%define build_openav 1 176%define build_sophos 1 177%define build_trend 1 178%endif 179%if %build_vscan 180%{?_with_fprot: %{expand: %%global build_fprot 1}} 181%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}} 182%{?_with_mks: %{expand: %%global build_mks 1}} 183%{?_with_openav: %{expand: %%global build_openav 1}} 184%{?_with_sophos: %{expand: %%global build_sophos 1}} 185#%{?_with_symantec: %{expand: %%global build_symantec 1}} 186%{?_with_trend: %{expand: %%global build_trend 1}} 187%global vscandir samba-vscan-%{vscanver} 188%endif 189%global vfsdir examples.bin/VFS 190 191#Standard texts for descriptions: 192%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}") 193%define message_system %(echo -e -n "NOTE: These packages of samba-%{version}, are provided, parallel installable\\nwith samba-2.2.x, to allow easy migration from samba-2.2.x to samba-%{version},\\nbut are not officially supported") 194 195#check gcc version to disable some optimisations on gcc-3.3.1 196%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}') 197 198#Define sets of binaries that we can use in globs and loops: 199%global commonbin net,ntlm_auth,rpcclient,smbcacls,smbcquotas,smbpasswd,smbtree,testparm,testprns 200 201%global serverbin editreg,pdbedit,profiles,smbcontrol,smbstatus,tdbbackup,tdbdump 202%global serversbin nmbd,samba,smbd,mkntpwd 203 204%global clientbin findsmb,nmblookup,smbclient,smbmnt,smbmount,smbprint,smbspool,smbtar,smbumount 205%global client_bin mount.cifs 206%global client_sbin mount.smb,mount.smbfs 207 208%global testbin debug2html,smbtorture,msgtest,masktest,locktest,locktest2,nsstest,vfstest 209 210%ifarch alpha 211%define build_expsam xml 212%else 213%define build_expsam mysql,xml 214%endif 215 216#Workaround missing macros in 8.x: 217%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}} 218 219# Determine whether this is the system samba or not. 220%if %build_system 221%define samba_major %{nil} 222%else 223%define samba_major 3 224%endif 225# alternatives_major is %{nil} if we aren't system and not using alternatives 226%if !%build_system || %build_alternatives 227%define alternative_major 3 228%else 229%define alternative_major %{nil} 230%endif 231 232Summary: Samba SMB server. 233Name: %{pkg_name}%{samba_major} 234 235%if %have_pre 236Version: %{pre_ver} 237%else 238Version: %{source_ver} 239%endif 240 241%if %have_prelease && !%have_pre 242Release: 1.%{prelease}mdk 243%endif 244%if %have_prelease && %have_pre 245Release: 0.%{pre_pre}.%{prelease}mdk 246%endif 247%if !%have_prelease && !%have_pre 248Release: %{rel} 249%endif 250%if !%have_prelease && %have_pre 251Release: 0.%{pre_pre}.%{rel} 252%endif 253 254License: GPL 255Group: System/Servers 256Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2 257URL: http://www.samba.org 258Source1: samba.log 259Source3: samba.xinetd 260Source4: swat_48.png.bz2 261Source5: swat_32.png.bz2 262Source6: swat_16.png.bz2 263Source7: README.%{name}-mandrake-rpm 264%if %build_vscan 265Source8: samba-vscan-%{vscanver}.tar.bz2 266%endif 267Source10: samba-print-pdf.sh.bz2 268Patch1: smbw.patch.bz2 269Patch4: samba-3.0-smbmount-sbin.patch.bz2 270%if !%have_pversion 271# Version specific patches: current version 272%else 273# Version specific patches: upcoming version 274%endif 275# Limbo patches (applied to prereleases, but not preleases, ie destined for 276# samba CVS) 277%if %have_pversion && %have_pre 278%endif 279Requires: pam >= 0.64, samba-common = %{version} 280BuildRequires: pam-devel readline-devel libncurses-devel popt-devel 281BuildRequires: libxml2-devel 282%ifnarch alpha 283BuildRequires: mysql-devel 284%endif 285%if %build_acl 286BuildRequires: libacl-devel 287%endif 288%if %build_mdk72 289BuildRequires: cups-devel 290%else 291BuildRequires: libcups-devel 292%endif 293BuildRequires: libldap-devel 294%if %build_ads 295BuildRequires: libldap-devel krb5-devel 296%endif 297BuildRoot: %{_tmppath}/%{name}-%{version}-root 298Prefix: /usr 299Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall 300Prereq: fileutils sed /bin/grep 301 302%description 303Samba provides an SMB server which can be used to provide 304network services to SMB (sometimes called "Lan Manager") 305clients, including various versions of MS Windows, OS/2, 306and other Linux machines. Samba also provides some SMB 307clients, which complement the built-in SMB filesystem 308in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols 309and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) 310protocol. 311 312Samba-3.0 features working NT Domain Control capability and 313includes the SWAT (Samba Web Administration Tool) that 314allows samba's smb.conf file to be remotely managed using your 315favourite web browser. For the time being this is being 316enabled on TCP port 901 via xinetd. SWAT is now included in 317it's own subpackage, samba-swat. 318 319Please refer to the WHATSNEW.txt document for fixup information. 320This binary release includes encrypted password support. 321 322Please read the smb.conf file and ENCRYPTION.txt in the 323docs directory for implementation details. 324%if %have_pversion 325%message_bugzilla samba3 326%endif 327%if !%build_system 328%message_system 329%endif 330%if %build_non_default 331WARNING: This RPM was built with command-line options. Please 332see README.%{name}-mandrake-rpm in the documentation for 333more information. 334%endif 335 336%package server 337URL: http://www.samba.org 338Summary: Samba (SMB) server programs. 339Requires: %{name}-common = %{version} 340%if %have_rpmhelper 341PreReq: rpm-helper 342%endif 343Group: Networking/Other 344%if %build_system 345Provides: samba 346Obsoletes: samba 347Provides: samba-server-ldap 348Obsoletes: samba-server-ldap 349Provides: samba3-server 350Obsoletes: samba3-server 351%else 352#Provides: samba-server 353%endif 354 355%description server 356Samba-server provides a SMB server which can be used to provide 357network services to SMB (sometimes called "Lan Manager") 358clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols 359and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) 360protocol. 361 362Samba-3.0 features working NT Domain Control capability and 363includes the SWAT (Samba Web Administration Tool) that 364allows samba's smb.conf file to be remotely managed using your 365favourite web browser. For the time being this is being 366enabled on TCP port 901 via xinetd. SWAT is now included in 367it's own subpackage, samba-swat. 368 369Please refer to the WHATSNEW.txt document for fixup information. 370This binary release includes encrypted password support. 371 372Please read the smb.conf file and ENCRYPTION.txt in the 373docs directory for implementation details. 374%if %have_pversion 375%message_bugzilla samba3-server 376%endif 377%if !%build_system 378%message_system 379%endif 380 381%package client 382URL: http://www.samba.org 383Summary: Samba (SMB) client programs. 384Group: Networking/Other 385Requires: %{name}-common = %{version} 386%if %build_alternatives 387#Conflicts: samba-client < 2.2.8a-9mdk 388%endif 389%if %build_system 390Provides: samba3-client 391Obsoletes: samba3-client 392Obsoletes: smbfs 393%else 394#Provides: samba-client 395%endif 396%if !%build_system && %build_alternatives 397Provides: samba-client 398%endif 399 400%description client 401Samba-client provides some SMB clients, which complement the built-in 402SMB filesystem in Linux. These allow the accessing of SMB shares, and 403printing to SMB printers. 404%if %have_pversion 405%message_bugzilla samba3-client 406%endif 407%if !%build_system 408%message_system 409%endif 410 411%package common 412URL: http://www.samba.org 413Summary: Files used by both Samba servers and clients. 414Group: System/Servers 415%if %build_system 416Provides: samba-common-ldap 417Obsoletes: samba-common-ldap 418Provides: samba3-common 419Obsoletes: samba3-common 420%else 421#Provides: samba-common 422%endif 423 424%description common 425Samba-common provides files necessary for both the server and client 426packages of Samba. 427%if %have_pversion 428%message_bugzilla samba3-common 429%endif 430%if !%build_system 431%message_system 432%endif 433 434%package doc 435URL: http://www.samba.org 436Summary: Documentation for Samba servers and clients. 437Group: System/Servers 438Requires: %{name}-common = %{version} 439%if %build_system 440Obsoletes: samba3-doc 441Provides: samba3-doc 442%else 443#Provides: samba-doc 444%endif 445 446%description doc 447Samba-doc provides documentation files for both the server and client 448packages of Samba. 449%if %have_pversion 450%message_bugzilla samba3-doc 451%endif 452%if !%build_system 453%message_system 454%endif 455 456%package swat 457URL: http://www.samba.org 458Summary: The Samba Web Administration Tool. 459Requires: %{name}-server = %{version} 460Requires: xinetd 461Group: System/Servers 462%if %build_system 463Provides: samba-swat-ldap 464Obsoletes: samba-swat-ldap 465Provides: samba3-swat 466Obsoletes: samba3-swat 467%else 468#Provides: samba-swat 469%endif 470 471%description swat 472SWAT (the Samba Web Administration Tool) allows samba's smb.conf file 473to be remotely managed using your favourite web browser. For the time 474being this is being enabled on TCP port 901 via xinetd. Note that 475SWAT does not use SSL encryption, nor does it preserve comments in 476your smb.conf file. Webmin uses SSL encryption by default, and 477preserves comments in configuration files, even if it does not display 478them, and is therefore the preferred method for remotely managing 479Samba. 480%if %have_pversion 481%message_bugzilla samba3-swat 482%endif 483%if !%build_system 484%message_system 485%endif 486 487%if %build_winbind 488%package winbind 489URL: http://www.samba.org 490Summary: Samba-winbind daemon, utilities and documentation 491Group: System/Servers 492Requires: %{name}-common = %{version} 493%endif 494%if %build_winbind && !%build_system 495Conflicts: samba-winbind 496%endif 497%if %build_winbind 498%description winbind 499Provides the winbind daemon and testing tools to allow authentication 500and group/user enumeration from a Windows or Samba domain controller. 501%endif 502%if %have_pversion 503%message_bugzilla samba3-winbind 504%endif 505%if !%build_system 506%message_system 507%endif 508 509%if %build_wins 510%package -n nss_wins%{samba_major} 511URL: http://www.samba.org 512Summary: Name Service Switch service for WINS 513Group: System/Servers 514Requires: %{name}-common = %{version} 515PreReq: glibc 516%endif 517%if %build_wins && !%build_system 518Conflicts: nss_wins 519%endif 520%if %build_wins 521%description -n nss_wins%{samba_major} 522Provides the libnss_wins shared library which resolves NetBIOS names to 523IP addresses. 524%endif 525%if %have_pversion 526%message_bugzilla nss_wins3 527%endif 528%if !%build_system 529%message_system 530%endif 531 532%if %{?_with_test:1}%{!?_with_test:0} 533%package test 534URL: http://www.samba.org 535Summary: Debugging and benchmarking tools for samba 536Group: System/Servers 537Requires: %{name}-common = %{version} 538%endif 539%if %build_system && %{?_with_test:1}%{!?_with_test:0} 540Provides: samba3-test samba3-debug 541Obsoletes: samba3-test samba3-debug 542%endif 543%if !%build_system && %{?_with_test:1}%{!?_with_test:0} 544Provides: samba-test samba3-debug 545Obsoletes: samba3-debug 546%endif 547%if %{?_with_test:1}%{!?_with_test:0} 548 549%description test 550This package provides tools for benchmarking samba, and debugging 551the correct operation of tools against smb servers. 552%endif 553 554%if %build_system 555%package -n %{libname} 556URL: http://www.samba.org 557Summary: SMB Client Library 558Group: System/Libraries 559Provides: libsmbclient 560 561%description -n %{libname} 562This package contains the SMB client library, part of the samba 563suite of networking software, allowing other software to access 564SMB shares. 565%endif 566%if %have_pversion && %build_system 567%message_bugzilla %{libname} 568%endif 569 570%if %build_system 571%package -n %{libname}-devel 572URL: http://www.samba.org 573Summary: SMB Client Library Development files 574Group: System/Libraries 575Provides: libsmbclient-devel 576Requires: %{libname} = %{version}-%{release} 577 578%description -n %{libname}-devel 579This package contains the development files for the SMB client 580library, part of the samba suite of networking software, allowing 581the development of other software to access SMB shares. 582%endif 583%if %have_pversion && %build_system 584%message_bugzilla %{libname}-devel 585%endif 586 587%if %build_system 588%package -n %{libname}-static-devel 589URL: http://www.samba.org 590Summary: SMB Client Static Library Development files 591Group: System/Libraries 592Provides: libsmbclient-static-devel = %{version}-%{release} 593Requires: %{libname}-devel = %{version}-%{release} 594 595%description -n %{libname}-static-devel 596This package contains the static development files for the SMB 597client library, part of the samba suite of networking software, 598allowing the development of other software to access SMB shares. 599%endif 600%if %have_pversion && %build_system 601%message_bugzilla %{libname}-devel 602%endif 603 604#%package passdb-ldap 605#URL: http://www.samba.org 606#Summary: Samba password database plugin for MySQL 607#Group: System/Libraries 608# 609#%description passdb-ldap 610#The passdb-ldap package for samba provides a password database 611#backend allowing samba to store account details in an LDAP 612#database 613#_if %have_pversion 614#_message_bugzilla samba3-passdb-ldap 615#_endif 616#_if !%build_system 617#_message_system 618#_endif 619 620%ifnarch alpha 621%package passdb-mysql 622URL: http://www.samba.org 623Summary: Samba password database plugin for MySQL 624Group: System/Libraries 625Requires: %{name}-server = %{version}-%{release} 626%endif 627%ifnarch alpha && %build_system 628Obsoletes: samba3-passdb-mysql 629Provides: samba3-passdb-mysql 630%endif 631%ifnarch alpha 632 633%description passdb-mysql 634The passdb-mysql package for samba provides a password database 635backend allowing samba to store account details in a MySQL 636database 637%endif 638 639%package passdb-xml 640URL: http://www.samba.org 641Summary: Samba password database plugin for XML files 642Group: System/Libraries 643Requires: %{name}-server = %{version}-%{release} 644%if %build_system 645Obsoletes: samba3-passdb-xml 646Provides: samba3-passdb-xml 647%endif 648 649%description passdb-xml 650The passdb-xml package for samba provides a password database 651backend allowing samba to store account details in XML files. 652%if %have_pversion 653%message_bugzilla samba3-passdb-xml 654%endif 655%if !%build_system 656%message_system 657%endif 658 659#Antivirus packages: 660%if %build_fprot 661%package vscan-fprot 662Summary: On-access virus scanning for samba using FPROT 663Group: System/Servers 664Requires: %{name}-server = %{version} 665Provides: %{name}-vscan 666Autoreq: 0 667%description vscan-fprot 668A vfs-module for samba to implement on-access scanning using the 669FPROT antivirus software (which must be installed to use this). 670%endif 671 672%if %build_kaspersky 673%package vscan-kaspersky 674Summary: On-access virus scanning for samba using Kaspersky 675Group: System/Servers 676Requires: %{name}-server = %{version} 677Provides: %{name}-vscan 678Autoreq: 0 679%description vscan-kaspersky 680A vfs-module for samba to implement on-access scanning using the 681Kaspersky antivirus software (which must be installed to use this). 682%endif 683 684%if %build_mks 685%package vscan-mks 686Summary: On-access virus scanning for samba using MKS 687Group: System/Servers 688Requires: %{name}-server = %{version} 689Provides: %{name}-vscan 690Autoreq: 0 691%description vscan-mks 692A vfs-module for samba to implement on-access scanning using the 693MKS antivirus software (which must be installed to use this). 694%endif 695 696%if %build_openav 697%package vscan-openav 698Summary: On-access virus scanning for samba using OpenAntivirus 699Group: System/Servers 700Requires: %{name}-server = %{version} 701Provides: %{name}-vscan 702Autoreq: 0 703%description vscan-openav 704A vfs-module for samba to implement on-access scanning using the 705OpenAntivirus antivirus software (which must be installed to use this). 706%endif 707 708%if %build_sophos 709%package vscan-sophos 710Summary: On-access virus scanning for samba using Sophos 711Group: System/Servers 712Requires: %{name}-server = %{version} 713Provides: %{name}-vscan 714Autoreq: 0 715%description vscan-sophos 716A vfs-module for samba to implement on-access scanning using the 717Sophos antivirus software (which must be installed to use this). 718%endif 719 720%if %build_symantec 721%package vscan-symantec 722Summary: On-access virus scanning for samba using Symantec 723Group: System/Servers 724Requires: %{name}-server = %{version} 725Provides: %{name}-vscan 726Autoreq: 0 727%description vscan-symantec 728A vfs-module for samba to implement on-access scanning using the 729Symantec antivirus software (which must be installed to use this). 730%endif 731 732%if %build_trend 733%package vscan-trend 734Summary: On-access virus scanning for samba using Trend 735Group: System/Servers 736Requires: %{name}-server = %{version} 737Provides: %{name}-vscan 738Autoreq: 0 739%description vscan-trend 740A vfs-module for samba to implement on-access scanning using the 741Trend antivirus software (which must be installed to use this). 742%endif 743 744%prep 745 746# Allow users to query build options with --with options: 747#%define opt_status(%1) %(echo %{1}) 748%if %{?_with_options:1}%{!?_with_options:0} 749%define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi) 750#exit 1 751%{error: } 752%{error:Build options available are:} 753%{error:--with[out] system Build as the system samba package [or as samba3]} 754%{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl} 755%{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind} 756%{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins} 757%{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap} 758%{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads} 759%{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners} 760%{error: } 761%else 762%{error: } 763%{error: This rpm has build options available, use --with options to see them} 764%{error: } 765%endif 766 767%if %{?_with_options:1}%{!?_with_options:0} && %build_scanners 768%{error:--with scanners enables fprot,mks,openav,sophos and trend by default} 769%{error: } 770%{error:To enable others (requires development libraries for the scanner):} 771%{error:--with kaspersky Enable on-access scanning with Kaspersky - %opt_status %build_kaspersky} 772%{error: } 773%endif 774 775%if %{?_with_options:1}%{!?_with_options:0} 776clear 777exit 1 778%endif 779 780 781%if %build_non_default 782RPM_EXTRA_OPTIONS="\ 783%{?_with_system: --with system}\ 784%{?_without_system: --without system}\ 785%{?_with_acl: --with acl}\ 786%{?_without_acl: --without acl}\ 787%{?_with_winbind: --with winbind}\ 788%{?_without_winbind: --without winbind}\ 789%{?_with_wins: --with wins}\ 790%{?_without_wins: --without wins}\ 791%{?_with_ldap: --with ldap}\ 792%{?_without_ldap: --without ldap}\ 793%{?_with_ads: --with ads}\ 794%{?_without_ads: --without ads}\ 795%{?_with_scanners: --with scanners}\ 796%{?_without_scanners: --without scanners}\ 797" 798echo "Building a non-default rpm with the following command-line arguments:" 799echo "$RPM_EXTRA_OPTIONS" 800echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7} 801echo "an identical rpm, you need to supply the following options">>%{SOURCE7} 802echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7} 803echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} 804%else 805echo "This rpm was built with default options">%{SOURCE7} 806echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} 807%endif 808 809%if %build_vscan 810%setup -q -a 8 -n %{pkg_name}-%{source_ver} 811%else 812%setup -q -n %{pkg_name}-%{source_ver} 813%endif 814#%patch111 -p1 815%patch1 -p1 -b .smbw 816%patch4 -p1 -b .sbin 817# Version specific patches: current version 818%if !%have_pversion 819echo "Applying patches for current version: %{ver}" 820%else 821# Version specific patches: upcoming version 822echo "Applying patches for new versions: %{pversion}" 823%endif 824 825# Limbo patches 826%if %have_pversion && %have_pre 827echo "Appling patches which should only be applied to prereleases" 828%endif 829 830# Fix quota compilation in glibc>2.3 831%if %build_mdk91 || %build_mdk92 832#grep "<linux/quota.h>" source/smbd/quotas.c >/dev/null && \ 833perl -pi -e 's@<linux/quota.h>@<sys/quota.h>@' source/smbd/quotas.c 834%endif 835 836cp %{SOURCE7} . 837 838# Make a copy of examples so that we have a clean one for doc: 839cp -a examples examples.bin 840 841%if %build_vscan 842cp -a %{vscandir} %{vfsdir} 843#fix stupid directory names: 844mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav 845%endif 846# Inline replacement of config dir 847for av in fprot kaspersky mks oav sophos trend; do 848 [ -e %{vfsdir}/%{vscandir}/$av/vscan-$av.h ] && perl -pi -e \ 849 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \ 850 %{vfsdir}/%{vscandir}/$av/vscan-$av.h 851done 852#Inline edit vscan header: 853perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g' %{vfsdir}/%{vscandir}/include/vscan-global.h 854 855# Edit some files when not building system samba: 856%if !%build_system 857perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c 858%endif 859 860#remove cvs internal files from docs: 861find docs examples -name '.cvsignore' -exec rm -f {} \; 862 863#make better doc trees: 864mkdir -p clean-docs/samba-doc 865cp -a examples docs clean-docs/samba-doc 866mv -f clean-docs/samba-doc/examples/libsmbclient clean-docs/ 867rm -Rf clean-docs/samba-doc/docs/{docbook,manpages,htmldocs,using_samba} 868ln -s %{_datadir}/swat%{samba_major}/using_samba/ clean-docs/samba-doc/docs/using_samba 869ln -sf %{_datadir}/swat%{samba_major}/help/ clean-docs/samba-doc/docs/htmldocs 870 871%build 872#%serverbuild 873(cd source 874CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'` 875%if %gcc331 876#CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-Os/g'` 877%endif 878# Don't use --with-fhs now, since it overrides libdir, it sets configdir, 879# lockdir,piddir logfilebase,privatedir and swatdir 880%configure --prefix=%{_prefix} \ 881 --sysconfdir=%{_sysconfdir}/%{name} \ 882 --localstatedir=/var \ 883 --libdir=%{_libdir}/%{name} \ 884 --with-privatedir=%{_sysconfdir}/%{name} \ 885 --with-lockdir=/var/cache/%{name} \ 886 --with-piddir=/var/run/%{name} \ 887 --with-swatdir=%{_datadir}/swat%{samba_major} \ 888 --with-configdir=%{_sysconfdir}/%{name} \ 889 --with-logfilebase=/var/log/%{name} \ 890%if !%build_ads 891 --with-ads=no \ 892%endif 893 --with-automount \ 894 --with-smbmount \ 895 --with-pam \ 896 --with-pam_smbpass \ 897%if %build_ldap 898 --with-ldapsam \ 899%endif 900 --with-tdbsam \ 901 --with-syslog \ 902 --with-quotas \ 903 --with-utmp \ 904 --with-manpages-langs=en \ 905%if %build_acl 906 --with-acl-support \ 907%endif 908 --disable-mysqltest \ 909 --with-expsam=%build_expsam \ 910 --program-suffix=%{samba_major} 911# --with-shared-modules=pdb_ldap,idmap_ldap \ 912# --with-manpages-langs=en,ja,pl \ 913#_if !%build_system 914# --with-smbwrapper \ 915#_endif 916# --with-nisplussam \ 917# --with-fhs \ 918 919#Fix the make file so we don't create debug information on 9.2 920%if %build_mdk92 921perl -pi -e 's/-g //g' Makefile 922%endif 923 924perl -pi -e 's|-Wl,-rpath,%{_libdir}||g;s|-Wl,-rpath -Wl,%{_libdir}||g' Makefile 925 926make proto_exists 927%make all libsmbclient smbfilter wins modules %{?_with_test: torture debug2html bin/log2pcap} bin/editreg client/mount.cifs 928 929 930# Build VFS modules (experimental) 931#cd ../%vfsdir 932#_configure --prefix=%{prefix} \ 933# --mandir=%{prefix}/share/man 934#make 935#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \ 936# -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" 937) 938 939# Build mkntpasswd in examples/LDAP/ for smbldaptools 940make -C examples.bin/LDAP/smbldap-tools/mkntpwd 941 942# Build antivirus vfs objects: 943%if %build_fprot 944echo -e "\n\nBuild antivirus VFS modules\n\n" 945echo "Building fprot" 946(cd %{vfsdir}/%{vscandir}/fprot;make) 947%endif 948%if %build_kaspersky 949echo "Building Kaspersky" 950(cd %{vfsdir}/%{vscandir}/kavp 951 perl -p -i -e "s|/usr/local/|/usr/|g" Makefile.KAV4 952 make -f Makefile.KAV4 953) 954%endif 955%if %build_mks 956echo "Building mks" 957(cd %{vfsdir}/%{vscandir}/mks;make) 958%endif 959%if %build_openav 960echo "Building OpenAntivirus" 961(cd %{vfsdir}/%{vscandir}/oav;make) 962%endif 963%if %build_sophos 964echo "building sophos" 965(cd %{vfsdir}/%{vscandir}/sophos;make) 966%endif 967%if %build_symantec 968echo "Building symantec" 969(cd %{vfsdir}/%{vscandir}/symantec;make) 970%endif 971%if %build_trend 972echo "Building Trend" 973(cd %{vfsdir}/%{vscandir}/trend;make) 974%endif 975 976%install 977rm -rf $RPM_BUILD_ROOT 978mkdir -p $RPM_BUILD_ROOT 979 980#Ensure all docs are readable 981chmod a+r docs -R 982 983# Any entries here mean samba makefile is *really* broken: 984mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name} 985mkdir -p $RPM_BUILD_ROOT/%{_datadir} 986mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs 987 988(cd source 989make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} install installclientlib installmodules) 990 991install -m755 source/bin/editreg %{buildroot}/%{_bindir} 992 993#need to stay 994mkdir -p $RPM_BUILD_ROOT/{sbin,bin} 995mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d} 996mkdir -p $RPM_BUILD_ROOT/%{_initrddir} 997mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} 998mkdir -p $RPM_BUILD_ROOT/var/log/%{name} 999mkdir -p $RPM_BUILD_ROOT/var/run/%{name} 1000mkdir -p $RPM_BUILD_ROOT/var/spool/%{name} 1001mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers} 1002mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC} 1003mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src 1004mkdir -p $RPM_BUILD_ROOT/%{_lib}/security 1005mkdir -p $RPM_BUILD_ROOT%{_libdir} 1006mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs 1007mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts 1008 1009#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build 1010#install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so 1011install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so 1012install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind.so 1013 1014install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a 1015pushd $RPM_BUILD_ROOT/%{_libdir} 1016[ -f libsmbclient.so ] && mv -f libsmbclient.so libsmbclient.so.%{libsmbmajor} 1017ln -sf libsmbclient.so.%{libsmbmajor} libsmbclient.so 1018popd 1019 1020# smbsh forgotten 1021#install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/ 1022 1023# Install VFS modules 1024#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs 1025#for i in block recycle 1026#do 1027# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs 1028#done 1029 1030# Antivirus support: 1031# mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan 1032 for av in fprot kavp mks oav sophos symantec trend; do 1033 if [ -d %{vfsdir}/%{vscandir}/$av -a -e %{vfsdir}/%{vscandir}/$av/vscan-$av*.so ];then 1034 cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.so \ 1035 $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs/ 1036 cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.conf \ 1037 $RPM_BUILD_ROOT%{_sysconfdir}/%{name} 1038 fi 1039 done 1040 1041#libnss_* not handled by make: 1042# Install the nsswitch library extension file 1043for i in wins winbind; do 1044 install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}.so 1045done 1046# Make link for wins and winbind resolvers 1047( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins.so libnss_wins.so.2; ln -s libnss_winbind.so libnss_winbind.so.2) 1048 1049%if %{?_with_test:1}%{!?_with_test:0} 1050for i in {%{testbin}};do 1051 install -m755 source/bin/${i} $RPM_BUILD_ROOT/%{_bindir}/${i}%{samba_major} 1052done 1053%endif 1054 1055# Install other stuff 1056 1057# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/ 1058 install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers 1059 install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} 1060 #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin 1061 install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} 1062 install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major} 1063 install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} 1064 install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind 1065# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major} 1066 install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind 1067 install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name} 1068 install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind 1069# 1070 install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name} 1071# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include 1072 1073# Install smbldap-tools scripts: 1074for i in examples/LDAP/smbldap-tools/*.pl; do 1075 install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ 1076 ln -s %{_datadir}/%{name}/scripts/`basename $i` $RPM_BUILD_ROOT/%{_bindir}/`basename $i|sed -e 's/\.pl//g'`%{samba_major} 1077done 1078 1079install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ 1080 1081# The conf file 1082install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name} 1083 1084#Fix the smbldap-tools when not system samba: 1085%if !%build_system 1086perl -pi -e 's/^(use|package)(\s+)smbldap_(\w+);$/${1}${2}smbldap_${3}%{samba_major};/g' \ 1087%{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm \ 1088%{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p? 1089perl -pi -e 's,/usr/local/sbin/mkntpwd,/usr/sbin/mkntpwd%{samba_major},g;s,553,421,g' %{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm 1090perl -pi -e 's,\$smbldap_conf::SID,\$smbldap_conf3::SID,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p? 1091%endif 1092perl -pi -e 's,/usr/local/sbin/smbldap-passwd.pl,%{_datadir}/%{name}/scripts/smbldap-passwd.pl,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap-useradd.pl 1093 1094# Link both smbldap*.pm into vendor-perl (any better ideas?) 1095mkdir -p %{buildroot}/%{perl_vendorlib} 1096ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_conf%{samba_major}.pm 1097ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_tools%{samba_major}.pm 1098#mkntpwd 1099install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}/mkntpwd%{samba_major} 1100 1101# Samba smbpasswd migration script: 1102install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ 1103 1104# make a conf file for winbind from the default one: 1105 cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf 1106 install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf 1107 1108# Some inline fixes for smb.conf for non-winbind use 1109install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf 1110cat packaging/Mandrake/smb.conf | \ 1111sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf 1112%if %build_cupspc 1113perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf 1114perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf 1115%endif 1116 1117#%if !%build_system 1118# Fix script paths in smb.conf 1119#perl -pi -e 's,%{_datadir}/samba,%{_datadir}/%{name},g' %{buildroot}/%{_sysconfdir}/%{name}/smb*.conf 1120#%endif 1121 1122 1123#install mount.cifs 1124install -m755 source/client/mount.cifs %{buildroot}/bin/mount.cifs%{samba_major} 1125 1126 echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts 1127 1128# Link smbspool to CUPS (does not require installed CUPS) 1129 1130 mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend 1131 ln -s %{_bindir}/smbspool%{alternative_major} $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{alternative_major} 1132 1133# xinetd support 1134 1135 mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d 1136 install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} 1137 1138# menu support 1139 1140mkdir -p $RPM_BUILD_ROOT%{_menudir} 1141cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF 1142?package(%{name}-swat):\ 1143command="gnome-moz-remote http://localhost:901/" \ 1144needs="gnome" \ 1145icon="swat%{samba_major}.png" \ 1146section="Configuration/Networking" \ 1147title="Samba Configuration (SWAT)" \ 1148longtitle="The Swat Samba Administration Tool" 1149?package(%{name}-swat):\ 1150command="sh -c '\$BROWSER http://localhost:901/'" \ 1151needs="x11" \ 1152icon="swat%{samba_major}.png" \ 1153section="Configuration/Networking" \ 1154title="Samba Configuration (SWAT)" \ 1155longtitle="The Swat Samba Administration Tool" 1156EOF 1157 1158mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir} 1159 1160bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png 1161bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png 1162bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png 1163 1164bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf 1165 1166# Fix configs when not building system samba: 1167 1168#Client binaries will have suffixes while we use alternatives, even 1169# if we are system samba 1170%if !%build_system || %build_alternatives 1171for OLD in %{buildroot}/%{_bindir}/{%{clientbin}} %{buildroot}/bin/%{client_bin} %{buildroot}/%{_libdir}/cups/backend/smb 1172do 1173 NEW=`echo ${OLD}%{alternative_major}` 1174 [ -e $OLD ] && mv -f $OLD $NEW 1175done 1176for OLD in %{buildroot}/%{_mandir}/man?/{%{clientbin}}* %{buildroot}/%{_mandir}/man?/%{client_bin}* 1177do 1178 if [ -e $OLD ] 1179 then 1180 BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'` 1181 EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` 1182 NEW=`echo ${BASE}%{alternative_major}${EXT}` 1183 mv $OLD $NEW 1184 fi 1185done 1186%endif 1187# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs 1188#I don't think it's possible for make to do this ... 1189(cd $RPM_BUILD_ROOT/sbin 1190 ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smb%{alternative_major} 1191 ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smbfs%{alternative_major} 1192) 1193# Server/common binaries are versioned only if not system samba: 1194%if !%build_system 1195for OLD in %{buildroot}/%{_bindir}/{%{commonbin}} %{buildroot}/%{_bindir}/{%{serverbin}} %{buildroot}/%{_sbindir}/{%{serversbin},swat} 1196do 1197 NEW=`echo ${OLD}%{alternative_major}` 1198 mv $OLD $NEW -f ||: 1199done 1200# And the man pages too: 1201for OLD in %{buildroot}/%{_mandir}/man?/{%{commonbin},%{serverbin},%{serversbin},swat,{%testbin},smb.conf,lmhosts}* 1202do 1203 if [ -e $OLD ] 1204 then 1205 BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'` 1206# BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'` 1207 EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` 1208 NEW=`echo ${BASE}%{samba_major}${EXT}` 1209 mv $OLD $NEW 1210 fi 1211done 1212# Replace paths in config files and init scripts: 1213for i in smb ;do 1214 perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major} 1215done 1216for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do 1217 perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i; 1218done 1219# Fix xinetd file for swat: 1220perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} 1221%endif 1222 1223#Clean up unpackaged files: 1224for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do 1225rm -f %{buildroot}/$i 1226done 1227 1228%clean 1229rm -rf $RPM_BUILD_ROOT 1230 1231%post server 1232 1233%_post_service smb%{samba_major} 1234#%_post_service wrepld%{samba_major} 1235 1236# Add a unix group for samba machine accounts 1237groupadd -frg 421 machines 1238 1239# Migrate tdb's from /var/lock/samba (taken from official samba spec file): 1240for i in /var/lock/samba/*.tdb 1241do 1242if [ -f $i ]; then 1243 newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'` 1244 echo "Moving $i to $newname" 1245 mv $i $newname 1246fi 1247done 1248 1249%post common 1250# Basic migration script for pre-2.2.1 users, 1251# since smb config moved from /etc to %{_sysconfdir}/samba 1252 1253# Let's create a proper %{_sysconfdir}/samba/smbpasswd file 1254[ -f %{_sysconfdir}/%{name}/smbpasswd ] || { 1255 echo "Creating password file for samba..." 1256 touch %{_sysconfdir}/%{name}/smbpasswd 1257} 1258 1259# And this too, in case we don't have smbd to create it for us 1260[ -f /var/cache/%{name}/unexpected.tdb ] || { 1261 touch /var/cache/%{name}/unexpected.tdb 1262} 1263 1264# Let's define the proper paths for config files 1265perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf 1266 1267# Fix the logrotate.d file from smb and nmb to smbd and nmbd 1268if [ -f %{_sysconfdir}/logrotate.d/samba ]; then 1269 perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba 1270 perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba 1271fi 1272 1273# And not loose our machine account SID 1274[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||: 1275 1276%if %build_winbind 1277%post winbind 1278if [ $1 = 1 ]; then 1279 /sbin/chkconfig winbind on 1280 cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave 1281 cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp 1282 for i in passwd group;do 1283 grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind' >/dev/null 1284 if [ $? = 0 ];then 1285 echo "Adding a winbind entry to the $i section of %{_sysconfdir}/nsswitch.conf" 1286 awk '/^'$i'/ {print $0 " winbind"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf; 1287 cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp 1288 else 1289 echo "$i entry found in %{_sysconfdir}/nsswitch.conf" 1290 fi 1291 done 1292 if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi 1293fi 1294 1295%preun winbind 1296if [ $1 = 0 ]; then 1297 echo "Removing winbind entries from %{_sysconfdir}/nsswitch.conf" 1298 perl -pi -e 's/ winbind//' %{_sysconfdir}/nsswitch.conf 1299 1300 /sbin/chkconfig winbind reset 1301fi 1302%endif %build_winbind 1303 1304%if %build_wins 1305%post -n nss_wins%{samba_major} 1306if [ $1 = 1 ]; then 1307 cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave 1308 grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins' >/dev/null 1309 if [ $? = 0 ];then 1310 echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf" 1311 awk '/^hosts/ {print $0 " wins"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf; 1312 else 1313 echo "wins entry found in %{_sysconfdir}/nsswitch.conf" 1314 fi 1315# else 1316# echo "Upgrade, leaving nsswitch.conf intact" 1317fi 1318 1319%preun -n nss_wins%{samba_major} 1320if [ $1 = 0 ]; then 1321 echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf" 1322 perl -pi -e 's/ wins//' %{_sysconfdir}/nsswitch.conf 1323#else 1324# echo "Leaving %{_sysconfdir}/nsswitch.conf intact" 1325fi 1326%endif %build_wins 1327 1328%preun server 1329 1330%_preun_service smb%{samba_major} 1331#%_preun_service wrepld%{samba_major} 1332 1333if [ $1 = 0 ] ; then 1334# /sbin/chkconfig --level 35 smb reset 1335# Let's not loose /var/cache/samba 1336 1337 if [ -d /var/cache/%{name} ]; then 1338 mv -f /var/cache/%{name} /var/cache/%{name}.BAK 1339 fi 1340fi 1341 1342%post swat 1343if [ -f /var/lock/subsys/xinetd ]; then 1344 service xinetd reload >/dev/null 2>&1 || : 1345fi 1346%update_menus 1347 1348%postun swat 1349 1350# Remove swat entry from xinetd 1351if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then 1352rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major} 1353 service xinetd reload &>/dev/null || : 1354fi 1355 1356if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi 1357 1358%clean_menus 1359 1360%if %build_system 1361%post -n %{libname} -p /sbin/ldconfig 1362%postun -n %{libname} -p /sbin/ldconfig 1363%endif 1364 1365%if %build_alternatives 1366%post client 1367 1368update-alternatives --install %{_bindir}/smbclient smbclient \ 1369%{_bindir}/smbclient%{alternative_major} 10 \ 1370$(for i in {/bin/mount.cifs,/sbin/{%{client_sbin}},%{_bindir}/{%{clientbin}}};do 1371j=`basename $i` 1372[ "$j" = "smbclient" ] || \ 1373echo -n " --slave ${i} ${j} ${i}%{alternative_major}";done) \ 1374--slave %{_libdir}/cups/backend/smb cups_smb %{_libdir}/cups/backend/smb%{alternative_major} || \ 1375update-alternatives --auto smbclient 1376 1377%preun client 1378[ $1 = 0 ] && update-alternatives --remove smbclient %{_bindir}/smbclient%{alternative_major} ||: 1379%endif 1380 1381%if %build_alternatives 1382%triggerpostun client -- samba-client, samba2-client 1383[ ! -e %{_bindir}/smbclient ] && update-alternatives --auto smbclient || : 1384%endif 1385 1386%files server 1387%defattr(-,root,root) 1388#%attr(-,root,root) /sbin/* 1389%(for i in %{_sbindir}/{%{serversbin}}%{samba_major};do echo $i;done) 1390#%{_sbindir}/%{name} 1391#%{_sbindir}/smbd%{samba_major} 1392#%{_sbindir}/nmbd%{samba_major} 1393#%{_sbindir}/mkntpwd%{samba_major} 1394#%{_sbindir}/wrepld%{samba_major} 1395%(for i in %{_bindir}/{%{serverbin}}%{samba_major};do echo $i;done) 1396#%{_bindir}/smbcontrol%{samba_major} 1397#%{_bindir}/smbstatus%{samba_major} 1398#%{_bindir}/pdbedit%{samba_major} 1399#%{_bindir}/tdbbackup%{samba_major} 1400#%{_bindir}/profiles%{samba_major} 1401#%{_bindir}/editreg%{samba_major} 1402%attr(755,root,root) /%{_lib}/security/pam_smbpass* 1403%dir %{_libdir}/%{name}/vfs 1404%{_libdir}/%{name}/vfs/*.so 1405%dir %{_libdir}/%{name}/pdb 1406 1407%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers 1408%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major} 1409#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major} 1410%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name} 1411%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name} 1412#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include 1413%{_mandir}/man1/smbstatus*.1* 1414%{_mandir}/man5/smbpasswd*.5* 1415%{_mandir}/man7/samba*.7* 1416%{_mandir}/man8/smbd*.8* 1417%{_mandir}/man8/nmbd*.8* 1418%{_mandir}/man8/pdbedit*.8* 1419%{_mandir}/man1/smbcontrol*.1* 1420%{_mandir}/man8/tdbbackup*.8* 1421%{_mandir}/man1/profiles*.1* 1422%{_mandir}/man1/editreg*.1* 1423%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon 1424%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles 1425%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers 1426%attr(2775,root,adm) %dir %{_localstatedir}/%{name}/printers/* 1427%attr(1777,root,root) %dir /var/spool/%{name} 1428%dir %{_datadir}/%{name} 1429%dir %{_datadir}/%{name}/scripts 1430%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf 1431%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smbldap*.pl 1432%attr(0750,root,adm) %{_bindir}/smbldap* 1433%attr(0640,root,adm) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm 1434%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm 1435%{perl_vendorlib}/*.pm 1436#%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl 1437%attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount 1438 1439 1440%files doc 1441%defattr(-,root,root) 1442%doc README COPYING Manifest Read-Manifest-Now 1443%doc WHATSNEW.txt Roadmap 1444%doc README.%{name}-mandrake-rpm 1445%doc clean-docs/samba-doc/docs 1446%doc clean-docs/samba-doc/examples 1447%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/ 1448 1449%files swat 1450%defattr(-,root,root) 1451%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major} 1452#%attr(-,root,root) /sbin/* 1453%{_sbindir}/swat%{samba_major} 1454%{_menudir}/%{name}-swat 1455%{_miconsdir}/*.png 1456%{_liconsdir}/*.png 1457%{_iconsdir}/*.png 1458%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/ 1459%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/ 1460%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/ 1461%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja 1462%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr 1463%{_mandir}/man8/swat*.8* 1464%lang(de) %{_libdir}/%{name}/de.msg 1465%lang(en) %{_libdir}/%{name}/en.msg 1466%lang(fr) %{_libdir}/%{name}/fr.msg 1467%lang(it) %{_libdir}/%{name}/it.msg 1468%lang(ja) %{_libdir}/%{name}/ja.msg 1469%lang(nl) %{_libdir}/%{name}/nl.msg 1470%lang(pl) %{_libdir}/%{name}/pl.msg 1471%lang(tr) %{_libdir}/%{name}/tr.msg 1472#%doc swat/README 1473 1474%files client 1475%defattr(-,root,root) 1476%(for i in %{_bindir}/{%{clientbin}}%{alternative_major};do echo $i;done) 1477%(for i in %{_mandir}/man?/{%{clientbin}}%{alternative_major}.?.*;do echo $i|grep -v smbprint;done) 1478%ifnarch alpha 1479%(for i in /sbin/{%{client_sbin}}%{alternative_major};do echo $i;done) 1480%attr(4755,root,root) /bin/mount.cifs%{alternative_major} 1481%attr(755,root,root) %{_bindir}/smbmount%{alternative_major} 1482%attr(4755,root,root) %{_bindir}/smbumount%{alternative_major} 1483%attr(4755,root,root) %{_bindir}/smbmnt%{alternative_major} 1484%{_mandir}/man8/smbmnt*.8* 1485%{_mandir}/man8/smbmount*.8* 1486%{_mandir}/man8/smbumount*.8* 1487%{_mandir}/man8/mount.cifs*.8* 1488%else 1489%exclude %{_bindir}/smb*m*nt%{samba_major} 1490%exclude %{_mandir}/man8/smb*m*nt*.8* 1491%endif 1492# Link of smbspool to CUPS 1493/%{_libdir}/cups/backend/smb%{alternative_major} 1494 1495%files common 1496%defattr(-,root,root) 1497%dir /var/cache/%{name} 1498%dir /var/log/%{name} 1499%dir /var/run/%{name} 1500%(for i in %{_bindir}/{%{commonbin}}%{samba_major};do echo $i;done) 1501%(for i in %{_mandir}/man?/{%{commonbin}}%{samba_major}\.[0-9]*;do echo $i;done) 1502#%{_libdir}/smbwrapper%{samba_major}.so 1503%dir %{_libdir}/%{name} 1504%{_libdir}/%{name}/*.dat 1505%{_libdir}/%{name}/charset 1506#%{_libdir}/%{name}/lowcase.dat 1507#%{_libdir}/%{name}/valid.dat 1508%dir %{_sysconfdir}/%{name} 1509%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf 1510%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf 1511%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts 1512%dir %{_localstatedir}/%{name} 1513%attr(-,root,root) %{_localstatedir}/%{name}/codepages 1514%{_mandir}/man5/smb.conf*.5* 1515%{_mandir}/man5/lmhosts*.5* 1516#%{_mandir}/man7/Samba*.7* 1517%dir %{_datadir}/swat%{samba_major} 1518 1519%if %build_winbind 1520%files winbind 1521%defattr(-,root,root) 1522%{_sbindir}/winbindd 1523%{_sbindir}/winbind 1524%{_bindir}/wbinfo 1525%attr(755,root,root) /%{_lib}/security/pam_winbind* 1526%attr(755,root,root) /%{_lib}/libnss_winbind* 1527%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind 1528%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind* 1529%{_mandir}/man8/winbindd*.8* 1530%{_mandir}/man1/wbinfo*.1* 1531%endif 1532 1533%if %build_wins 1534%files -n nss_wins%{samba_major} 1535%defattr(-,root,root) 1536%attr(755,root,root) /%{_lib}/libnss_wins.so* 1537%endif 1538 1539%if %{?_with_test:1}%{!?_with_test:0} 1540%files test 1541%defattr(-,root,root) 1542%(for i in %{_bindir}/{%{testbin}}%{samba_major};do echo $i;done) 1543%{_mandir}/man1/vfstest%{samba_major}*.1* 1544%exclude %{_mandir}/man1/log2pcap*.1* 1545%else 1546%exclude %{_mandir}/man1/vfstest%{samba_major}*.1* 1547%exclude %{_mandir}/man1/log2pcap*.1* 1548%endif 1549 1550%if %build_system 1551%files -n %{libname} 1552%defattr(-,root,root) 1553%{_libdir}/libsmbclient.so.* 1554%else 1555%exclude %{_libdir}/libsmbclient.so.* 1556%endif 1557 1558%if %build_system 1559%files -n %{libname}-devel 1560%defattr(-,root,root) 1561%{_includedir}/* 1562%{_libdir}/libsmbclient.so 1563%doc clean-docs/libsmbclient/* 1564%else 1565%exclude %{_includedir}/* 1566%exclude %{_libdir}/libsmbclient.so 1567%endif 1568 1569%if %build_system 1570%files -n %{libname}-static-devel 1571%defattr(-,root,root) 1572%{_libdir}/libsmbclient.a 1573%else 1574%exclude %{_libdir}/libsmbclient.a 1575%endif 1576 1577#%files passdb-ldap 1578#%defattr(-,root,root) 1579#%{_libdir}/%{name}/*/*ldap.so 1580 1581%ifnarch alpha 1582%files passdb-mysql 1583%defattr(-,root,root) 1584%{_libdir}/%{name}/pdb/*mysql.so 1585%endif 1586 1587%files passdb-xml 1588%defattr(-,root,root) 1589%{_libdir}/%{name}/pdb/*xml.so 1590 1591#Files for antivirus support: 1592%if %build_fprot 1593%files vscan-fprot 1594%defattr(-,root,root) 1595%{_libdir}/%{name}/vfs/vscan-fprotd.so 1596%config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf 1597%doc %{vfsdir}/%{vscandir}/INSTALL 1598%endif 1599 1600%if %build_kaspersky 1601%files vscan-kaspersky 1602%defattr(-,root,root) 1603%{_libdir}/%{name}/vfs/vscan-kavp.so 1604%config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf 1605%doc %{vfsdir}/%{vscandir}/INSTALL 1606%endif 1607 1608%if %build_mks 1609%files vscan-mks 1610%defattr(-,root,root) 1611%{_libdir}/%{name}/vfs/vscan-mksd.so 1612%config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf 1613%doc %{vfsdir}/%{vscandir}/INSTALL 1614%endif 1615 1616%if %build_openav 1617%files vscan-openav 1618%defattr(-,root,root) 1619%{_libdir}/%{name}/vfs/vscan-oav.so 1620%config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf 1621%doc %{vfsdir}/%{vscandir}/INSTALL 1622%endif 1623 1624%if %build_sophos 1625%files vscan-sophos 1626%defattr(-,root,root) 1627%{_libdir}/%{name}/vfs/vscan-sophos.so 1628%config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf 1629%doc %{vfsdir}/%{vscandir}/INSTALL 1630%endif 1631 1632%if %build_symantec 1633%files vscan-symantec 1634%defattr(-,root,root) 1635%{_libdir}/%{name}/vfs/vscan-symantec.so 1636%config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf 1637%doc %{vfsdir}/%{vscandir}/INSTALL 1638%endif 1639 1640%if %build_trend 1641%files vscan-trend 1642%defattr(-,root,root) 1643%{_libdir}/%{name}/vfs/vscan-trend.so 1644%config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf 1645%doc %{vfsdir}/%{vscandir}/INSTALL 1646%endif 1647 1648%exclude %{_mandir}/man1/smbsh*.1* 1649 1650%changelog 1651* Fri Dec 05 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.5mdk 1652- Allow winbind to start if old winbind ranges are used (ease upgrades) 1653 1654* Tue Nov 18 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.4mdk 1655- Fix build as system on 8.2 (and probably earlier) 1656 1657* Sun Nov 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.3mdk 1658- Ensure printer drivers keep permissions by default (setgid and inherit perms) 1659 1660* Fri Nov 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.2mdk 1661- 3.0.1pre3 1662- Add support for Mandrake 10.0 (as system samba) 1663- Fix alternatives triggers 1664- Fix obsoletes 1665 1666* Mon Nov 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre2.2mdk 1667- 3.0.1pre2 1668- misc spec files (pointed out by Luca Olivetti) 1669- Fix path to smbldap-passwd.pl 1670- Only allow one copy of winbind and nss_wins 1671- Add trigger for alternatives 1672 1673* Sun Oct 12 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre1.2mdk 1674- 3.0.1pre1 1675- remove buildroot patch (p3), fixed upstream 1676 1677* Thu Sep 25 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-2mdk 1678- 3.0.0 final 1679 1680* Sat Sep 13 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc4.2mdk 1681- rc4 1682- Don't update alternatives in pre/post scripts when not using alternatives 1683- Fix case of --with-system without alternatives 1684- Final fixes to smbldap-tools for non-system case 1685- Remove duplicate docs (really - 1 character typo ...) 1686- Update configs (fix winbind init script, add example scripts in smb.conf) 1687 1688* Tue Sep 09 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc3.2mdk 1689- rc3 1690- Fix mount.smb{,fs} alternatives (spotted by Laurent Culioli) 1691 1692* Thu Sep 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.3mdk 1693- Fix alternatives 1694- Fix libname (can I blame guillomovitch's evil line-wrapping spec mode?) 1695- Fix smbldap-tools package/use names when not system samba 1696- Don't conflict samba3-client with samba-client for now so we can install it 1697 1698* Fri Aug 29 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.2mdk 1699- rc2 1700- Remove patches 100-102 (upstream) 1701- Fix libname 1702- Alternatavise client 1703- Better solution to avoid rpath 1704 1705* Fri Aug 22 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.3mdk 1706- Fix build with test package (p100), but not by default (too big) 1707- Fix (p101) for SID resolution when member of samba-2.2.x domain 1708- Fix libsmbclient packages (thanks Gotz) 1709- version mount.cifs, patch from CVS (p102), and setuid it 1710- Clean up docs (guillomovitch spam ;-) 1711 1712* Sat Aug 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.2mdk 1713- rc1 1714- disable test subpackage since it's broken again 1715 1716* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk 1717- Rebuild for kerberos-1.3 on cooker 1718- Put printer directories back 1719- Add mount.cifs 1720- Go back to standard optimisations 1721 1722* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk 1723- beta3 1724- remove -g from cflags to avoid large static libraries 1725- drop optimisation from O2 to O1 for gcc 3.3.1 1726- own some directories for distriblint's benefit 1727- use chrpath on distro's that have it to drastically reduce rpmlint score 1728 1729* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk 1730- place non-conditional excludes at the end of files list, to prevent causing 1731 rpm in Mandrake <=8.2 from segfaulting when processing files. 1732- Update default config 1733 1734* Wed Jul 02 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.2mdk 1735- 3.0.0beta2 1736- manually build editreg 1737- Add some new man pages 1738 1739* Tue Jun 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.3mdk 1740- add provision for passdb-ldap subpackage (it doesn't build like that yet) 1741- avoid debugging info on cooker/9.2 for the moment 1742- We probably don't need to autoconf (and can thus build on 8.1) 1743- We can probably build without kerberos support (and thus on 8.0) 1744- Don't require mysql-devel on alpha's (maybe we want to be able to disable 1745 mysql support for other arches?) 1746- We shouldn't need to specifically add openssl to include path, since ssl 1747 support is deprecated. 1748- png icons, change menu title to not conflict with ksambaplugin 1749- update to samba-vscan-0.3.3beta1, but it still does not build the vscan 1750 modules. 1751- add -static-devel package 1752- Add buildrequires for lib packages that are picked up if installed 1753 (ncurses, popt) in an attempt to get slbd to build samba3 1754- Fix default config (P100) 1755 1756* Sun Jun 08 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.2mdk 1757- Get packages into cooker (klama doesn't want to build this package ..) 1758- samba-vscan-0.3.2b 1759 1760* Fri Jun 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.2mdk 1761- Rename debug package to test and other fixes for rpm-4.2 1762- prepare for beta1 1763 1764* Wed Apr 30 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.1mdk 1765- Remove some files removed upstream 1766- In builds from source, don't terminate on missing docs or unpackaged files 1767 (if only we could do it for other missing files ...) 1768 1769* Mon Apr 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.0mdk 1770- Reenable debug package by (--without debug to not build it), fixed post-a23 1771- Add bugzilla note for builds from source (also intended for packages made 1772 available on samba FTP site) at samba team request 1773- Fix build from CVS (run autogen.sh, pass options to all rpm commands) 1774- Appease distriblint, but not much to be done about /usr/share/swat3/ since 1775 samba-doc owns some subdirs, and samba-swat others, and they can be installed 1776 independantly. 1777- Apply kaspersky vscan build fix from samba2 1778- Final for alpha24 1779 1780* Wed Apr 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.3mdk 1781- Small fixes in preparation for testing as system samba 1782- Make debug package optional (--with debug) since it's often broken 1783- Add support for 9.2 (including in-line smbd quota patch for glibc2.3) 1784- Add --with options option, which will just show you the available options and exit 1785 1786* Sun Apr 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.2mdk 1787- Alpha23 1788- buildrequire autconf2.5 1789- samba-vscan 0.3.2a 1790- Remove patch 102 (upstreamed) 1791 1792* Thu Mar 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha22.2mdk 1793- Alpha22 1794- Add profiles binary to server and ntlm_auth to common 1795- smbwrapper and torture target broken (only in 9.0?) 1796- remove unused source 2 1797 1798* Tue Mar 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.4mdk 1799- Don't provide samba-{server,client,common} when not system samba (bug #2617) 1800- Don't build libsmbclient packages when not system samba 1801- Fix conflict between samba-server and samba3-server (pam_smbpass) 1802- Fix smbwrapper (from 2.2.7a-5mdk for bug #2356) 1803- Fix codepage/charset example (bug #1574) 1804 1805* Thu Jan 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.3mdk 1806- samba-vscan 0.3.1 (and make it build again), including required inline edits 1807- Make all vscan packages provide samba(3)-vscan 1808- Build all vscan except kav (requires kaspersky lib) with --with-scanners 1809- Add vscan-(scanner).conf files 1810- Explicitly add ldapsam for 2.2 compatability when building --with ldap, 1811 default build now uses new ldap passdb backend (ie you always get ldap) 1812- Enable (experimental) tdb passdb backend 1813- Fix file ownership conflicts between server and common 1814- Cleanup configure, to match order of --help 1815- Fix libdir location, was being overridden by --with-fhs 1816- Split off a libsmbclient and -devel package 1817- Add wins replication init script (patch 102) 1818- Workaround passdb/pdb_xml.c not compiling 1819- Workaround missing install targets for smbsh/smbwrapper.so in cvs 1820- Inline patch smbd/quotas.c for Mandrake >9.0 1821 1822* Wed Nov 27 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.2mdk 1823- Remove patch 20,21,22,23,25,26 (upstream) 1824- New destdir patch from cvs (18) 1825- package installed but non-packaged files 1826- new debug subpackage for vfstest and related files (it was that or nuke the 1827 manpage ;-)) 1828- use _libdir for libdir instead of _sysconfdir 1829- Update samba-vscan (untested) 1830 1831* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk 1832- Fix mount.smbfs3 pointing to smbmount not in package 1833- Remove unnecessary lines from install (now done by make) 1834- Build with ldap and ads on all releases by default 1835- Put av-stuff back 1836 1837* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk 1838- When not building as system samba, avoid conflicting with system samba 1839- Macro-ize as much as possible for above (aka finish cleanups) 1840- Fix paths in init scripts and logrotate and xinetd 1841- Fix provides and obsoletes so as to provide samba, but not obsolete 1842 current stable until we have a stable release (when it's the system samba). 1843- Add warnings to descriptions when not system samba. 1844- This is now parallel installable with the normal samba release, for easy 1845 testing. It shouldn't touch existing installations. Of course, only 1846 one samba at a time on the same interface! 1847 1848* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk 1849- Merge with 2.2.6pre2.2mdk 1850- Detect alpha- and beta-, along with pre-releases 1851 1852* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk 1853- Sync with 2.2.3-2mdk (new --without options, detect when 1854 building for a different distribution. 1855 1856* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk 1857- Sync with 2.2.2-10mdk, which added build-time options --with ldap, 1858 winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added 1859 warning in description if built with these options. 1860 1861* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk 1862- Added if's for build_ads, which hopefully will add Active Directory 1863 Support (by request). 1864 1865* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk 1866- More syncing with 2.2 rpm (post and postun scripts) 1867- Testing without ldap 1868 1869* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk 1870- 3.0-alpha13 1871- Fixed installman.sh patch. 1872 1873* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk 1874- Fixed %post and %preun for nss_wins, added %post and %preun for 1875 samba-winbind (chkconfig and winbind entries in nsswitch.conf) 1876 1877* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk 1878- 3.0-alpha12 1879- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2 1880- Added new subpackage for swat 1881- More if's for ldap. 1882 1883* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk 1884- 3.0-alpha11 1885 1886* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk 1887- 3.0-alpha10 1888 1889* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk 1890- 3.0-alpha9 1891 1892* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk 1893- Added net command to %files common, pdbedit and smbgroupedit to 1894 %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup). 1895 Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches) 1896 1897* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk 1898- Patch for installman.sh to handle lang=en correctly (p24) 1899- added --with-manpages-langs=en,ja,pl (translated manpages), but there 1900 aren't any manpages for these languages yet ... so we still 1901 need %dir and %doc entries for them ... 1902- patch (p25) to configure.in to support more than 2 languages. 1903- addtosmbpass seems to have returned for now, but make_* have disappeared! 1904 1905* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk 1906- DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts 1907 this forces move of smbcontrol and smbmnt to %{prefix}/bin 1908 removed --with-pam_smbpass as it doesn't compile. 1909 1910* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk 1911- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!) 1912- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch 1913 (applied upstream), removed ook-patch (codepage directory totally different). 1914- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 1915 should be applied upstream before 3.0 ships ... 1916 1917* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk 1918- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck). 1919- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy). 1920 1921* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk 1922- Had to remove the network recycle bin patch: it seems to mess up 1923 file deletion from windows (files appear to be "already in use") 1924 1925* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk 1926- added network recycle bin patch: 1927 <http://www.amherst.edu/~bbstone/howto/samba.html> 1928- added "recycle bin = .recycled" parameter in smb.conf [homes]. 1929- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o) 1930 1931* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk 1932- added %build 8.0 and 7.2, for tweakers to play around. 1933- changed configure options: 1934 . removed --with-mmap, --with-netatalk (obsolete). 1935 . added --with-msdfs, --with-vfs (seems stable, but still need testing). 1936 1937* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk 1938- rebuilt with winbind and nss_wins enabled. 1939 1940* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk 1941- Rebuilt on cooker. 1942 1943* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk 1944- Patch for smb.conf to fix incorrect lpq command, typo in winbind, 1945 and add sample linpopup command. Added print driver directories. 1946- New XFS quota patch (untested!, samba runs, but do quotas work? We 1947 can't check yet since the kernel doesn't seem to support XFS quotas!) 1948 1949* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk 1950- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne 1951 Who did a tremendous integration work on 2.2.2. 1952 Rebuild on cooker, please test XFS (ACLs and quotas) again... 1953 1954* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk 1955- Samba-2.2.2. released! Use %defines to determine which subpackages 1956 are built and which Mandrake release we are buiding on/for (hint: define 1957 build_mdk81 1 for Mandrake 8.1 updates) 1958 1959* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk 1960- %post and %postun for nss_wins 1961 1962* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk 1963- New CVS snapshot, /etc/pam.d/system-auth-winbind added 1964 with configuration to allow easy winbind setup. 1965 1966* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk 1967- Added new package nss_wins and moved smbpasswd to common (required by 1968 winbind). 1969 1970* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk 1971- Added new package winbind. 1972 1973* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk 1974- Removed patch to smb init.d file (applied in cvs) 1975 1976* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk 1977- Added winbind init script, which still needs to check for running nmbd. 1978 1979* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk 1980- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and 1981 pam_winbind, moved pam_smbpass from samba-common to samba. We still 1982 need a start-up script for winbind, or need to modify existing one. 1983 1984* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk 1985- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou) 1986 Added smbd patch to support XFS quota (Nathan Scott) 1987 1988* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk 1989- Oops! smbpasswd created in wrong directory... 1990 1991* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk 1992- Removed a wrong comment in smb.conf. 1993 Added creation of smbpasswd during install. 1994 1995* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk 1996- really less verbose %%post 1997 1998* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk 1999- Fix shared libs in /usr/bin silliness. 2000 2001* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk 2002- less verbose %%post 2003 2004* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk 2005- Added smbcacls (missing in %files), modification to smb.conf: ([printers] 2006 is still needed, even with point-and-print!, user add script should 2007 use name and not gid, since we may not get the gid . New script for 2008 putting manpages in place (still need to be added in %files!). Moved 2009 smbcontrol to sbin and added it and its man page to %files. 2010 2011* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk 2012- cleanup /var/lib/samba/codepage/src 2013 2014* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk 2015- moved codepage generation to %%install and codepage dir to /var/lib/samba 2016 2017* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk 2018- /lib/* was in both samba and samba-common 2019 Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember 2020 when Samba was under the Megabyte..." 2021 2022* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk 2023- Added "the gc touch" to smbinit through the use of killall -0 instead of 2024 grep cupsd | grep -v grep (too many greps :o) 2025 2026* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk 2027- BuildRequires: libcups-devel 2028- Removed BuildRequires: openssl-devel 2029 2030* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk 2031- replace chkconfig --add/del with --level 35 on/reset. 2032 2033* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk 2034- Replace discription s/inetd/xinetd/, we all love xinetd, blah. 2035 2036* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk 2037- Bugfix release. Fixed add user script, added print$ share and printer admin 2038 We need to test interaction of new print support with CUPS, but printer 2039 driver uploads should work. 2040 2041* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk 2042- fixed smb.conf a bit, rebuilt on cooker. 2043 2044* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk 2045- Finally, samba 2.2.1 has actually been release. At least we were ready! 2046 Cleaned up smb.conf, and added some useful entries for domain controlling. 2047 Migrated changes made in samba's samba2.spec for 2.2.1 to this file. 2048 Added groupadd command in post to create a group for samba machine accounts. 2049 (We should still check the postun, samba removes pam, logs and cache) 2050 2051* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk 2052- fixed smbwrapper compile options. 2053 2054* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk 2055- added LFS support. 2056 added smbwrapper support (smbsh) 2057 2058* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk 2059- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location 2060 of smbmount (/usr/bin/smbmount) 2061 2062* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk 2063- smbmount and smbumount are now in /usr/bin and SUID. 2064 added ||: to triggerpostun son you don't get error 1 anymore when rpm -e 2065 Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)! 2066 2067* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk 2068- s/Copyright/License/; 2069- Stop Sylvester from pretending .gz source to be .bz2 source via filename 2070 aka really bzip2 the source. 2071 2072* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk 2073- changed Till's startup script modifications: now samba is being reloaded 2074 automatically 1 minute after it has started (same reasons as below in 9mdk) 2075 added _post_ and _preun_ for service smb 2076 fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing) 2077 2078* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk 2079- Modified the Samba startup script so that in case of CUPS being used as 2080 printing system Samba only starts when the CUPS daemon is ready to accept 2081 requests. Otherwise the CUPS queues would not appear as Samba shares. 2082 2083* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk 2084- patched smbmount.c to have it call smbmnt in sbin (thanks Seb). 2085 2086* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk 2087- put SWAT menu icons back in place. 2088 2089* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk 2090- OOPS! fixed smbmount symlinks 2091 2092* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk 2093- removed inetd postun script, replaced with xinetd. 2094 updated binary list (smbcacls...) 2095 cleaned samba.spec 2096 2097* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk 2098- Changed configure options to point to correct log and codepage directories, 2099 added crude script to fix logrotate file for new log file names, updated 2100 patches to work with current CVS. 2101 2102* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk 2103- Cleaned and updated the %files section. 2104 2105* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk 2106- Moved all samba files from /etc to /etc/samba (Thanks DomS!). 2107 Fixed fixinit patch (/etc/samba/smb.conf) 2108 2109* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk 2110- Now use packaging/Mandrake/smb.conf, removed unused and obsolete 2111 patches, moved netlogon and profile shares to /var/lib/samba in the 2112 smb.conf to match the spec file. Added configuration for ntlogon to 2113 smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed 2114 symlink I introduced in 2.2.0-1mdk 2115 2116* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk 2117- Added more configure options. Changed Description field (thx John T). 2118 2119* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk 2120- moved netlogon and profiles to /var/lib/samba by popular demand ;o) 2121 2122* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk 2123- moved netlogon and profiles back to /home. 2124 2125* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk 2126- fixed post inetd/xinetd script& 2127 2128* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk 2129- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware 2130 nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches 2131 to take. smbadduser and addtosmbpass seem to have disappeared. Moved 2132 all Mandrake-specific files to packaging/Mandrake and made patches 2133 from those shipped with samba. Moved netlogon to /home/samba and added 2134 /home/samba/profiles. Added winbind,smbfilter and debug2html to make command. 2135 2136* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk 2137- Fix menu entry and provide separate menu entry for GNOME 2138 (nautilus doesn't support HTTP authentication yet) 2139- Add icons in package 2140 2141* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk 2142- use new server macros 2143 2144* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk 2145- check whether /etc/inetd.conf exists (upgrade) or not (fresh install). 2146 2147* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk 2148- spec cosmetics, added '-r' option to lpr-cups command line so files are 2149 removed from /var/spool/samba after printing. 2150 2151* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk 2152- merged last rh patches. 2153 2154* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk 2155- removed dependencies on cups and cups-devel so one can install samba without using cups 2156- added /home/netlogon 2157 2158* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk 2159- Changed default print command in /etc/smb.conf, so that the Windows 2160 driver of the printer has to be used on the client. 2161- Fixed bug in smbspool which prevented from printing from a 2162 Linux-Samba-CUPS client to a Windows server through the guest account. 2163 2164* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk 2165- Moved "smbspool" (Samba client of CUPS) to the samba-client package 2166 2167* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk 2168- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes 2169 quota related compile problems on the alpha. 2170 2171* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk 2172- Fixed 'guest ok = ok' flag in smb.conf 2173 2174* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk 2175- Allowed guest account to print in smb.conf 2176- added swat icon in menu 2177 2178* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk 2179- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2 2180 2181* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk 2182- Changed fixinit patch. 2183- Changed smb.conf for better CUPS configuration. 2184- Thanks Fred for doing this ---vvv. 2185 2186* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk 2187- menu entry for web configuration tool. 2188- merge with rh: xinetd + ssl + pam_stack. 2189- Added smbadduser rh-bugfix w/o relocation of config-files. 2190 2191* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk 2192- added build requires on cups-devel and pam-devel. 2193 2194* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk 2195- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was 2196 wrong. 2197 2198* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk 2199- Cosmetic changes to make rpmlint more happy 2200 2201* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk 2202- added linkage to the using_samba book in swat 2203 2204* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk 2205- Added CUPS support to smb.conf 2206- Added internationalization options to smb.conf [Global] 2207 2208* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk 2209- Put "smbspool" to the files to install 2210 2211* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk 2212- Did some cleaning in the patches 2213 2214* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk 2215- relocated man pages from /usr/man to /usr/share/man for compatibility reasons 2216 2217* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk 2218- added make_unicodemap and build of unicode_map.$i in the spec file 2219 2220* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk 2221- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug. 2222 2223* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk 2224- 2.0.7 2225 2226* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk 2227 2228- Titi sucks, does not put versions in changelog 2229- Fixed groups for -common and -client 2230- /usr/sbin/samba is no config file 2231 2232* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> 2233- fix buggy post install script (pixel) 2234 2235* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk 2236 2237- Changed group according to 7.1 specs 2238- Some spec file changes 2239- Let spec-helper do its job 2240 2241* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> 2242- 2.0.6. 2243 2244* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> 2245- Merge with rh changes. 2246- Split in 3 packages. 2247 2248* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> 2249- corrected a bug with %post (the $1 parameter is "1" in case of 2250 a first install, not "0". That parameter is the number of packages 2251 of the same name that will exist after running all the steps if nothing 2252 is removed; so it is "1" after first isntall, "2" for a second install 2253 or an upgrade, and "0" for a removal) 2254 2255* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> 2256- made smbmnt and smbumount suid root, and only executable by group 'smb' 2257 add to 'smb' group any user that should be allowed to mount/unmount 2258 SMB shared directories 2259 2260* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> 2261- 2.0.5a (bug security fix). 2262 2263* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com> 2264- 2.0.5 2265- cs/da/de/fi/fr/it/tr descriptions/summaries 2266 2267* Sun Jun 13 1999 Bernhard Rosenkr�nzer <bero@mandrakesoft.com> 2268- 2.0.4b 2269- recompile on a system that works ;) 2270 2271* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> 2272- Mandrake adaptations. 2273- Bzip2 man-pages. 2274 2275* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com> 2276- add a mount.smb to make smb mounting a little easier. 2277- smb filesystems apparently do not work on alpha. Oops. 2278 2279* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com> 2280- always create codepages 2281 2282* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com> 2283- logrotate changes 2284 2285* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com> 2286- auto rebuild in the new build environment (release 3) 2287 2288* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com> 2289- updated init script to use graceful restart (not stop/start) 2290 2291* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com> 2292- update to 2.0.3 2293 2294* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com> 2295- update to 2.0.2 2296 2297* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com> 2298- swat swat 2299 2300* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com> 2301- fix bash2 breakage in post script 2302 2303* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com> 2304- update to 2.0.0 2305 2306* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com> 2307- make sure all binaries are stripped 2308 2309* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com> 2310- update to 1.9.18p10. 2311- fix %triggerpostun. 2312 2313* Tue Jul 07 1998 Erik Troan <ewt@redhat.com> 2314- updated postun triggerscript to check $0 2315- clear /etc/codepages from %preun instead of %postun 2316 2317* Mon Jun 08 1998 Erik Troan <ewt@redhat.com> 2318- made the %postun script a tad less agressive; no reason to remove 2319 the logs or lock file (after all, if the lock file is still there, 2320 samba is still running) 2321- the %postun and %preun should only exectute if this is the final 2322 removal 2323- migrated %triggerpostun from Red Hat's samba package to work around 2324 packaging problems in some Red Hat samba releases 2325 2326* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au> 2327- minor tidy up in preparation for release of 1.9.18p5 2328- added findsmb utility from SGI package 2329 2330* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au> 2331- Updated version and codepage info. 2332- Release to test name resolve order 2333 2334* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au> 2335- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com> 2336- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb 2337- Compounded make line 2338- Updated smb.init restart mechanism 2339- Use compound mkdir -p line instead of individual calls to mkdir 2340- Fixed smb.conf file path for log files 2341- Fixed smb.conf file path for incoming smb print spool directory 2342- Added a number of options to smb.conf file 2343- Added smbadduser command (missed from all previous RPMs) - Doooh! 2344- Added smbuser file and smb.conf file updates for username map 2345