1/*          Definitions for DigiBoard ditty(1) command.                 */
2
3#if !defined(TIOCMODG)
4#define	TIOCMODG	(('d'<<8) | 250)		/* get modem ctrl state	*/
5#define	TIOCMODS	(('d'<<8) | 251)		/* set modem ctrl state	*/
6#endif
7
8#if !defined(TIOCMSET)
9#define	TIOCMSET	(('d'<<8) | 252)		/* set modem ctrl state	*/
10#define	TIOCMGET	(('d'<<8) | 253)		/* set modem ctrl state	*/
11#endif
12
13#if !defined(TIOCMBIC)
14#define	TIOCMBIC	(('d'<<8) | 254)		/* set modem ctrl state */
15#define	TIOCMBIS	(('d'<<8) | 255)		/* set modem ctrl state */
16#endif
17
18#if !defined(TIOCSDTR)
19#define	TIOCSDTR	(('e'<<8) | 0)		/* set DTR		*/
20#define	TIOCCDTR	(('e'<<8) | 1)		/* clear DTR		*/
21#endif
22
23/************************************************************************
24 * Ioctl command arguments for DIGI parameters.
25 ************************************************************************/
26#define DIGI_GETA	(('e'<<8) | 94)		/* Read params		*/
27
28#define DIGI_SETA	(('e'<<8) | 95)		/* Set params		*/
29#define DIGI_SETAW	(('e'<<8) | 96)		/* Drain & set params	*/
30#define DIGI_SETAF	(('e'<<8) | 97)		/* Drain, flush & set params */
31
32#define	DIGI_GETFLOW	(('e'<<8) | 99)		/* Get startc/stopc flow */
33						/* control characters 	 */
34#define	DIGI_SETFLOW	(('e'<<8) | 100)		/* Set startc/stopc flow */
35						/* control characters	 */
36#define	DIGI_GETAFLOW	(('e'<<8) | 101)		/* Get Aux. startc/stopc */
37						/* flow control chars 	 */
38#define	DIGI_SETAFLOW	(('e'<<8) | 102)		/* Set Aux. startc/stopc */
39						/* flow control chars	 */
40
41struct	digiflow_struct {
42	unsigned char	startc;				/* flow cntl start char	*/
43	unsigned char	stopc;				/* flow cntl stop char	*/
44};
45
46typedef struct digiflow_struct digiflow_t;
47
48
49/************************************************************************
50 * Values for digi_flags
51 ************************************************************************/
52#define DIGI_IXON	0x0001		/* Handle IXON in the FEP	*/
53#define DIGI_FAST	0x0002		/* Fast baud rates		*/
54#define RTSPACE		0x0004		/* RTS input flow control	*/
55#define CTSPACE		0x0008		/* CTS output flow control	*/
56#define DSRPACE		0x0010		/* DSR output flow control	*/
57#define DCDPACE		0x0020		/* DCD output flow control	*/
58#define DTRPACE		0x0040		/* DTR input flow control	*/
59#define DIGI_FORCEDCD	0x0100		/* Force carrier		*/
60#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config	*/
61#define	DIGI_AIXON	0x0400		/* Aux flow control in fep	*/
62
63
64/************************************************************************
65 * Structure used with ioctl commands for DIGI parameters.
66 ************************************************************************/
67struct digi_struct {
68	unsigned short	digi_flags;		/* Flags (see above)	*/
69};
70
71typedef struct digi_struct digi_t;
72