Searched hist:802 (Results 1 - 17 of 17) sorted by relevance
/freebsd-10.3-release/sys/kern/ | ||
H A D | kern_uuid.c | diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. diff 124835 Thu Jan 22 13:34:11 MST 2004 rse Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only. 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | init_sysent.c | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | syscalls.c | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
/freebsd-10.3-release/bin/uuidgen/ | ||
H A D | Makefile | 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | uuidgen.c | 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | uuidgen.1 | 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
/freebsd-10.3-release/lib/libc/sys/ | ||
H A D | uuidgen.2 | 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | Makefile.inc | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
/freebsd-10.3-release/sys/sys/ | ||
H A D | uuid.h | 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | syscall.mk | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | syscall.h | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
H A D | sysproto.h | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
/freebsd-10.3-release/sys/sparc64/ebus/ | ||
H A D | ebus.c | diff 292785 Sun Dec 27 17:53:25 MST 2015 marius MFC: r287767 - Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1] |
/freebsd-10.3-release/usr.sbin/arp/ | ||
H A D | arp.c | diff 233773 Mon Apr 02 10:44:34 MDT 2012 glebius Historically arp(8) did a route lookup for the entry it is about to add, and failed if it exist and had invalid data link type. Later on, in r201282, this check morphed to other code, but message "proxy entry exists for non 802 device" still left, and now it is printed in a case if route prefix found is equal to current address being added. In other words, when we are trying to add ARP entry for a network address. The message is absolutely unrelated and disappointing in this case. I don't see anything bad with setting ARP entries for network addresses. While useless in usual network, in a /31 RFC3021 it may be necessary. This, remove this code. |
/freebsd-10.3-release/usr.bin/ | ||
H A D | Makefile | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
/freebsd-10.3-release/sys/dev/syscons/ | ||
H A D | syscons.c | diff 802 Sat Nov 27 06:32:41 MST 1993 rich Fix conflicting prototypes and return values. |
/freebsd-10.3-release/sys/conf/ | ||
H A D | files | diff 97372 Tue May 28 06:16:08 MDT 2002 marcel Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous. |
Completed in 892 milliseconds