Searched +hist:4 +hist:bf8e196 (Results 1 - 2 of 2) sorted by last modified time

/linux-master/drivers/gpu/drm/
H A DKconfigdiff 71fc3249 Thu Jan 18 02:05:28 MST 2024 Thomas Zimmermann <tzimmermann@suse.de> video/nomodeset: Select nomodeset= parameter with CONFIG_VIDEO

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-4-tzimmermann@suse.de
diff ffcc67cd Wed Nov 08 09:36:22 MST 2023 Harry Wentland <harry.wentland@amd.com> drm/vkms: Create separate Kconfig file for VKMS

This aligns with most other DRM drivers and will allow
us to add new VKMS config options without polluting
the DRM Kconfig.

v3:
- Change SPDX to GPL-2.0-only to match DRM KConfig
SPDX (Simon)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-4-harry.wentland@amd.com
diff 4babef07 Wed Nov 22 09:34:26 MST 2023 Sarah Walker <sarah.walker@imgtec.com> drm/imagination: Add skeleton PowerVR driver

This adds the basic skeleton of the driver. The driver registers
itself with DRM on probe. Ioctl handlers are currently implemented
as stubs.

Changes since v8:
- Corrected license identifiers

Changes since v5:
- Update compatible string & description to match marketing name
- Checkpatch fixes in to/from_pvr_device/file macros

Changes since v3:
- Clarify supported GPU generations in driver description
- Use drm_dev_unplug() when removing device
- Change from_* and to_* functions to macros
- Fix IS_PTR/PTR_ERR confusion in pvr_probe()
- Remove err_out labels in favour of direct returning
- Remove specific am62 compatible match string
- Drop MODULE_FIRMWARE()

Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
diff b21f187f Sat Jul 29 13:26:48 MDT 2023 Thomas Zimmermann <tzimmermann@suse.de> fbdev: Use _DMAMEM_ infix for DMA-memory helpers

Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
H A DMakefilediff 4babef07 Wed Nov 22 09:34:26 MST 2023 Sarah Walker <sarah.walker@imgtec.com> drm/imagination: Add skeleton PowerVR driver

This adds the basic skeleton of the driver. The driver registers
itself with DRM on probe. Ioctl handlers are currently implemented
as stubs.

Changes since v8:
- Corrected license identifiers

Changes since v5:
- Update compatible string & description to match marketing name
- Checkpatch fixes in to/from_pvr_device/file macros

Changes since v3:
- Clarify supported GPU generations in driver description
- Use drm_dev_unplug() when removing device
- Change from_* and to_* functions to macros
- Fix IS_PTR/PTR_ERR confusion in pvr_probe()
- Remove err_out labels in favour of direct returning
- Remove specific am62 compatible match string
- Drop MODULE_FIRMWARE()

Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff f39db26c Thu Jun 15 08:36:12 MDT 2023 Sui Jingfeng <suijingfeng@loongson.cn> drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
1) Use hpd status reg when polling for ls7a2000.
2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
1) Add COMPILE_TEST to Kconfig and make the driver off by default
2) Alphabetical sorting headers (Thomas)
3) Untangle register access functions as much as possible (Thomas)
4) Switch to TTM-based memory manager (Thomas)
5) Add the chip ID detection function which can be used to distinguish
chip models
6) Revise the built-in HDMI phy driver, nearly all main stream mode below
4K@30Hz is tested, and this driver supports clone(mirror) display mode
and extend(joint) display mode.

v3 -> v4:
1) Quickly fix a small mistake.

v4 -> v5:
1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
2) Fix all typos I could found, make sentences and code more readable
3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

modetest -M loongson -s 32:1920x1080 -v
modetest -M loongson -s 34:1920x1080 -v -F tiles

It works like a charm, when running the pageflip test with dual screens
configuration, another two additional BOs were created by the modetest,
VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

# cat bos

bo[0000]: size: 8112kB VRAM
bo[0001]: size: 16kB VRAM
bo[0002]: size: 16kB VRAM
bo[0003]: size: 16208kB VRAM
bo[0004]: size: 8112kB VRAM
bo[0005]: size: 8112kB VRAM

v8 -> v9:
1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
the pinned BO could not be moved, the VRAM lost power when sleeping
to RAM. Thus, the data in the buffer who is pinned in VRAM will get
lost when resumed. Yet it's not a big problem because this driver
relies on the CPU to update the front framebuffer. We can see the
garbage data when resume from S3, but the screen will show the right
image as I move the cursor. This is due to the CPU repaint. v10 of
this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
1) On a double-screen case, The buffer object backing the single giant
framebuffer is referenced by two GEM objects; hence, it will be
pinned at least twice by prepare_fb() function. This causes its pin
count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
which is not correct on double-screen case. V11 of this patch unpin
the BOs until its pin count reaches zero when suspend. Then, we make
the S3 support complete finally. With v11, I can't see any garbage
data when resume.

2) Fix vblank wait timeout when disable CRTC.
3) Test against IGT, at least fbdev test and kms_flip test passed.
4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
5) Drop a few common hardware features description in lsdc_desc (Emil)
6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
create function. (Emil)
7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
none

v12 -> v13:
1) Add benchmarks to figure out the bandwidth of the hardware platform.
Usage:
# cd /sys/kernel/debug/dri/0/
# cat benchmark

2) VRAM is filled with garbage data if uninitialized, add a buffer
clearing procedure (lsdc_bo_clear), clear the BO on creation time.
3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
1) Trying to add async update support for cursor plane.

v14 -> v15:
1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
co-exist in the system, more is also possible (Emil and Xuerui)
2) Fix typos and grammar mistakes as much as possible (Xuerui)
3) Unify copyrights as GPL-2.0+ (Xuerui)
4) Fix a bug introduce since V13, TTM may import BO from other drivers,
we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
diff 28483b86 Sat Dec 03 03:22:54 MST 2022 Cai Huoqing <cai.huoqing@linux.dev> drm: Remove the obsolete driver-r128

Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked r128 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
ATI Rage 128->drivers/gpu/drm/r128

It's time to remove this driver.

Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-4-cai.huoqing@linux.dev
diff 84ec6728 Sun Sep 11 23:28:47 MDT 2022 Jim Cromie <jim.cromie@gmail.com> drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro

For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().

This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.

#> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control

CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu. This is large enough that a kernel builder
might not want it.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff 4a83c26a Mon Aug 01 18:04:03 MDT 2022 Danilo Krummrich <dakr@redhat.com> drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
diff 4a83c26a Mon Aug 01 18:04:03 MDT 2022 Danilo Krummrich <dakr@redhat.com> drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

Completed in 298 milliseconds