Searched +hist:3 +hist:c5994c8 (Results 1 - 2 of 2) sorted by last modified time
/linux-master/ | ||
H A D | Makefile | diff 50a33998 Fri Mar 01 04:21:07 MST 2024 Masahiro Yamada <masahiroy@kernel.org> kbuild: fix inconsistent indentation in top Makefile Commit 3b9ab248bc45 ("kbuild: use 4-space indentation when followed by conditionals") introduced inconsistent indentation because it deliberately touched only the conditional directives to minimize the change set. This commit reformats some blocks in the top Makefile so they are consistently indented with 4 spaces. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> diff 3b9ab248 Thu Feb 01 18:31:42 MST 2024 Masahiro Yamada <masahiroy@kernel.org> kbuild: use 4-space indentation when followed by conditionals GNU Make manual [1] clearly forbids a tab at the beginning of the conditional directive line: "Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed." This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by conditionals") replaced the inappropriate tabs with 8 spaces. However, the 8-space indentation cannot be visually distinguished. Linus suggested 2-4 spaces for those nested if-statements. [2] This commit redoes the replacement with 4 spaces. [1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax [2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 56769ba4 Sat Oct 14 04:54:35 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: unify vdso_install rules Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Unintended updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation. 'make vdso_install' for parisc does not work. 'make vdso_install' for s390 installs vdso64, but not vdso32. To address these problems, this commit introduces a generic vdso_install rule. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install a vdso file as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the base names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390 Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> diff 9418e686 Sat Jul 29 16:03:17 MDT 2023 Miguel Ojeda <ojeda@kernel.org> rust: enable `no_mangle_with_rust_abi` Clippy lint Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c37d2b ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: https://github.com/rust-lang/rust-clippy/issues/10347 [1] Link: https://github.com/Rust-for-Linux/linux/pull/967 [2] Link: https://github.com/rust-lang/rustfmt/issues/5701 [3] Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> diff 9418e686 Sat Jul 29 16:03:17 MDT 2023 Miguel Ojeda <ojeda@kernel.org> rust: enable `no_mangle_with_rust_abi` Clippy lint Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c37d2b ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: https://github.com/rust-lang/rust-clippy/issues/10347 [1] Link: https://github.com/Rust-for-Linux/linux/pull/967 [2] Link: https://github.com/rust-lang/rustfmt/issues/5701 [3] Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> diff b5ec6fd2 Fri Jun 09 03:28:30 MDT 2023 Peter Zijlstra <peterz@infradead.org> kbuild: Drop -Wdeclaration-after-statement With the advent on scope-based resource management it comes really tedious to abide by the contraints of -Wdeclaration-after-statement. It will still be recommeneded to place declarations at the start of a scope where possible, but it will no longer be enforced. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAHk-%3Dwi-RyoUhbChiVaJZoZXheAwnJ7OO%3DGxe85BkPAd93TwDA%40mail.gmail.com diff b5ec6fd2 Fri Jun 09 03:28:30 MDT 2023 Peter Zijlstra <peterz@infradead.org> kbuild: Drop -Wdeclaration-after-statement With the advent on scope-based resource management it comes really tedious to abide by the contraints of -Wdeclaration-after-statement. It will still be recommeneded to place declarations at the start of a scope where possible, but it will no longer be enforced. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAHk-%3Dwi-RyoUhbChiVaJZoZXheAwnJ7OO%3DGxe85BkPAd93TwDA%40mail.gmail.com diff df8fc4e9 Wed May 17 17:18:11 MDT 2023 Kees Cook <keescook@chromium.org> kbuild: Enable -fstrict-flex-arrays=3 The -fstrict-flex-arrays=3 option is now available with the release of GCC 13[1] and Clang 16[2]. This feature instructs the compiler to treat only C99 flexible arrays as dynamically sized for the purposes of object size calculations. In other words, the ancient practice of using 1-element arrays, or the GNU extension of using 0-sized arrays, as a dynamically sized array is disabled. This allows CONFIG_UBSAN_BOUNDS, CONFIG_FORTIFY_SOURCE, and other object-size aware features to behave unambiguously in the face of trailing arrays: only C99 flexible arrays are considered to be dynamically sized. For yet more detail, see: https://people.kernel.org/kees/bounded-flexible-arrays-in-c Enabling this will help track down any outstanding cases of fake flexible arrays that need attention in kernel code. [1] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html#index-fstrict-flex-arrays [2] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-fstrict-flex-arrays Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: linux-kbuild@vger.kernel.org Co-developed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> diff df8fc4e9 Wed May 17 17:18:11 MDT 2023 Kees Cook <keescook@chromium.org> kbuild: Enable -fstrict-flex-arrays=3 The -fstrict-flex-arrays=3 option is now available with the release of GCC 13[1] and Clang 16[2]. This feature instructs the compiler to treat only C99 flexible arrays as dynamically sized for the purposes of object size calculations. In other words, the ancient practice of using 1-element arrays, or the GNU extension of using 0-sized arrays, as a dynamically sized array is disabled. This allows CONFIG_UBSAN_BOUNDS, CONFIG_FORTIFY_SOURCE, and other object-size aware features to behave unambiguously in the face of trailing arrays: only C99 flexible arrays are considered to be dynamically sized. For yet more detail, see: https://people.kernel.org/kees/bounded-flexible-arrays-in-c Enabling this will help track down any outstanding cases of fake flexible arrays that need attention in kernel code. [1] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html#index-fstrict-flex-arrays [2] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-fstrict-flex-arrays Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: linux-kbuild@vger.kernel.org Co-developed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> diff 05e96e96 Wed Mar 15 09:50:18 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 05e96e96 Wed Mar 15 09:50:18 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
/linux-master/scripts/ | ||
H A D | Makefile.asm-generic | diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff cda2c65f Fri Jun 24 16:42:24 MDT 2016 James Hogan <jhogan@kernel.org> kbuild: Remove stale asm-generic wrappers When a header file is removed from generic-y (often accompanied by the addition of an arch specific header), the generated wrapper file will persist, and in some cases may still take precedence over the new arch header. For example commit f1fe2d21f4e1 ("MIPS: Add definitions for extended context") removed ucontext.h from generic-y in arch/mips/include/asm/, and added an arch/mips/include/uapi/asm/ucontext.h. The continued use of the wrapper when reusing a dirty build tree resulted in build failures in arch/mips/kernel/signal.c: arch/mips/kernel/signal.c: In function ‘sc_to_extcontext’: arch/mips/kernel/signal.c:142:12: error: ‘struct ucontext’ has no member named ‘uc_extcontext’ return &uc->uc_extcontext; ^ Fix by detecting and removing wrapper headers in generated header directories that do not correspond to a filename in generic-y, genhdr-y, or the newly introduced generated-y. Reported-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kbuild@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1466808144-23209-3-git-send-email-james.hogan@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> diff 3c5994c8 Tue Oct 16 17:25:44 MDT 2012 Catalin Marinas <catalin.marinas@arm.com> uapi: Allow automatic generation of uapi/asm/ header files Several arch/*/include/uapi/asm/* header simply include the corresponding <asm-generic/*> file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> diff 3c5994c8 Tue Oct 16 17:25:44 MDT 2012 Catalin Marinas <catalin.marinas@arm.com> uapi: Allow automatic generation of uapi/asm/ header files Several arch/*/include/uapi/asm/* header simply include the corresponding <asm-generic/*> file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> |
Completed in 911 milliseconds