/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/ |
H A D | dm.c | 79 rtlphy->current_channel); 80 rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/ |
H A D | dm.c | 76 rtlphy->current_channel); 77 rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/drivers/iio/adc/ |
H A D | ad7949.c | 76 * @current_channel: current channel in use 88 unsigned int current_channel; member in struct:ad7949_adc_chip 145 if (channel == ad7949_adc->current_channel) 164 ad7949_adc->current_channel = channel; 282 ad7949_adc->current_channel = 0; 286 FIELD_PREP(AD7949_CFG_MASK_INX, ad7949_adc->current_channel) | 298 ad7949_spi_read_channel(ad7949_adc, &val, ad7949_adc->current_channel); 299 ad7949_spi_read_channel(ad7949_adc, &val, ad7949_adc->current_channel);
|
H A D | pac1934.c | 1160 unsigned int current_channel; local 1164 current_channel = 1; 1177 if (current_channel >= (info->phys_channels + 1) || 1210 current_channel++;
|
/linux-master/drivers/net/ieee802154/ |
H A D | fakelb.c | 173 hw->phy->current_channel = 13; 174 phy->channel = hw->phy->current_channel;
|
H A D | atusb.c | 862 atusb->hw->phy->current_channel = 11; /* reset default */ 871 atusb->hw->phy->current_channel = 11; /* reset default */ 882 atusb->hw->phy->current_channel = 5;
|
H A D | at86rf230.c | 1474 lp->hw->phy->current_channel = 11; 1486 lp->hw->phy->current_channel = 5; 1497 lp->hw->phy->current_channel = 13;
|
/linux-master/drivers/net/wireless/realtek/rtw88/ |
H A D | sar.c | 36 rtw_phy_set_tx_power_level(rtwdev, hal->current_channel);
|
H A D | debug.c | 645 ch = hal->current_channel; 702 dm_info->rssi[RF_PATH_A] - 100, hal->current_channel); 730 seq_printf(m, "Current CH(fc) = %u\n", rtwdev->hal.current_channel);
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8192de/ |
H A D | sw.c | 77 rtlpriv->phy.current_channel = 36; 79 rtlpriv->phy.current_channel = 1;
|
H A D | dm.c | 554 rtlphy->current_channel); 555 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); 717 if (rtlphy->current_channel >= 100 && 718 rtlphy->current_channel <= 165) 777 rtl92d_get_rightchnlplace_for_iqk(rtlphy->current_channel);
|
H A D | phy.c | 2242 "IQK:Start!!!channel %d\n", rtlphy->current_channel); 2342 rtlphy->current_channel); 2614 _rtl92d_phy_reload_lck_setting(hw, rtlpriv->phy.current_channel); 2822 u8 channel = rtlphy->current_channel; 2843 if (rtlphy->current_channel > 14 && !(ret_value & BIT(0))) 2845 else if (rtlphy->current_channel <= 14 && (ret_value & BIT(0))) 2872 "switch to channel%d\n", rtlphy->current_channel); 2878 rtlphy->current_channel, 2907 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
H A D | dm.c | 936 u8 channel = rtlphy->current_channel; 1330 rtlphy->current_channel, 1350 rtlphy->current_channel, RF90_PATH_A); 1369 rtlphy->current_channel, RF90_PATH_A); 1393 rtlphy->current_channel, RF90_PATH_B); 1410 rtlphy->current_channel, RF90_PATH_B); 1428 rtlphy->current_channel, RF90_PATH_B); 1805 u8 channel = rtlphy->current_channel; 1958 rtlphy->current_channel, 1978 rtlphy->current_channel, RF90_PATH_ [all...] |
/linux-master/net/mac802154/ |
H A D | mib.c | 35 local->phy->current_channel = chan;
|
H A D | main.c | 222 local->phy->current_channel);
|
H A D | cfg.c | 114 wpan_phy->current_channel == channel) 124 wpan_phy->current_channel = channel;
|
H A D | scan.c | 73 wpan_phy->current_channel); 75 wpan_phy->current_channel);
|
/linux-master/drivers/thermal/ |
H A D | armada_thermal.c | 75 int current_channel; member in struct:armada_thermal_priv 329 if (priv->current_channel == channel) 352 priv->current_channel = channel; 905 priv->current_channel = -1;
|
/linux-master/net/ieee802154/ |
H A D | nl-phy.c | 48 nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel))
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/ |
H A D | phy.c | 665 rtl8723e_phy_set_txpower_level(hw, rtlphy->current_channel); 826 "switch to channel%d\n", rtlphy->current_channel); 833 (hw, rtlphy->current_channel, &rtlphy->sw_chnl_stage, 857 WARN_ONCE((rtlphy->current_channel > 14), 1490 rtl8723e_phy_set_txpower_level(hw, rtlphy->current_channel);
|
H A D | dm.c | 410 rtlphy->current_channel); 411 rtl8723e_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8192c/ |
H A D | phy_common.c | 591 rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel); 682 "switch to channel%d\n", rtlphy->current_channel); 689 (hw, rtlphy->current_channel, &rtlphy->sw_chnl_stage, 714 WARN_ONCE((rtlphy->current_channel > 14), 1554 rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/drivers/net/wireless/realtek/rtlwifi/rtl8723be/ |
H A D | phy.c | 1279 "switch to channel%d\n", rtlphy->current_channel); 1286 rtlphy->current_channel, 1312 WARN_ONCE((rtlphy->current_channel > 14), 1321 rtlphy->current_channel); 2367 idx = _get_right_chnl_place_for_iqk(rtlphy->current_channel); 2466 rtl8723be_phy_set_txpower_level(hw, rtlphy->current_channel);
|
/linux-master/include/net/ |
H A D | cfg802154.h | 216 u8 current_channel; member in struct:wpan_phy
|
/linux-master/drivers/media/dvb-frontends/drx39xyj/ |
H A D | drx_driver.h | 1882 struct drx_channel current_channel; member in struct:drx_common_attr 2217 #define DRX_ATTR_CURRENTCHANNEL(d) ((d)->my_common_attr->current_channel)
|