Searched refs:DWC_ERROR (Results 1 - 14 of 14) sorted by relevance

/netgear-R7800-V1.0.2.28/target/linux/lantiq/files/drivers/usb/dwc_otg/
H A Ddwc_otg_hcd_intr.c254 DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
696 DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
785 DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
1408 DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
1409 DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
1410 DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
1412 DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
1413 DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
1415 DWC_ERROR(" Endpoint type: %s\n",
1424 DWC_ERROR(" Spee
[all...]
H A Ddwc_otg_driver.c182 DWC_ERROR("`%d' invalid for parameter `%s'\n", \
224 DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
235 DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
248 DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
262 DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
304 DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
499 DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
523 DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
762 DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
781 DWC_ERROR("dwc_otg_pcd_ini
[all...]
H A Ddwc_otg_plat.h254 #define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) macro
H A Ddwc_otg_hcd.c319 DWC_ERROR( "Device Not Connected/Responding\n" );
460 DWC_ERROR("%s: host channel allocation failed\n", __func__);
522 DWC_ERROR("%s: status_buf allocation failed\n", __func__);
899 DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
905 DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
1618 DWC_ERROR ("DWC OTG HCD - "
1693 DWC_ERROR ("DWC OTG HCD - "
1738 DWC_ERROR("Device Not Supported\n");
1993 DWC_ERROR ("DWC OTG HCD - "
H A Ddwc_otg_cil_intr.c193 DWC_ERROR( "Device Not Connected/Responding!\n" );
261 DWC_ERROR( "Device Not Connected/Responding\n" );
H A Ddwc_otg_cil.c1057 DWC_ERROR("%s: Unable to clear halt on channel %d\n",
/netgear-R7800-V1.0.2.28/target/linux/ramips/files/drivers/usb/dwc_otg/
H A Ddwc_otg_hcd_intr.c258 DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
724 DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
793 DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
1419 DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
1420 DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
1421 DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
1423 DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
1424 DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
1426 DWC_ERROR(" Endpoint type: %s\n",
1435 DWC_ERROR(" Spee
[all...]
H A Ddwc_otg_driver.c214 DWC_ERROR("`%d' invalid for parameter `%s'\n", \
256 DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
275 DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
287 DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
302 DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
344 DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
535 DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
557 DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
810 DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
828 DWC_ERROR("dwc_otg_pcd_ini
[all...]
H A Ddwc_otg_hcd.c334 DWC_ERROR("Device Not Connected/Responding\n");
495 DWC_ERROR("%s: host channel allocation failed\n", __func__);
560 DWC_ERROR("%s: status_buf allocation failed\n", __func__);
953 DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
959 DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
1694 DWC_ERROR("DWC OTG HCD - "
1769 DWC_ERROR("DWC OTG HCD - "
1816 DWC_ERROR("Device Not Supported\n");
2053 DWC_ERROR("DWC OTG HCD - "
H A Ddwc_otg_cil_intr.c191 DWC_ERROR("Device Not Connected/Responding!\n");
259 DWC_ERROR("Device Not Connected/Responding\n");
H A Ddwc_otg_pcd.c559 DWC_ERROR("%s queue req %p, len %d buf %p\n",
1618 DWC_ERROR("Session Request Already active!\n");
1874 DWC_ERROR("Device not connected/responding\n");
1882 DWC_ERROR("Device not connected/responding\n");
2297 DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
2477 DWC_ERROR("bind to driver %s --> error %d\n",
H A Ddwc_otg_cil.c1206 DWC_ERROR("%s: Unable to clear halt on channel %d\n",
1807 DWC_ERROR("%s: Failed to allocate memory to handle "
H A Ddwc_otg_pcd_intr.c1530 DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
2614 DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
/netgear-R7800-V1.0.2.28/target/linux/ramips/files/drivers/usb/dwc_otg/linux/
H A Ddwc_otg_plat.h245 #define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) macro

Completed in 79 milliseconds