Searched refs:GPIO (Results 1 - 25 of 33) sorted by relevance

12

/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-ux500/
H A Dpins-db8500.h16 #define GPIO0_GPIO PIN_CFG(0, GPIO)
21 #define GPIO1_GPIO PIN_CFG(1, GPIO)
26 #define GPIO2_GPIO PIN_CFG(2, GPIO)
31 #define GPIO3_GPIO PIN_CFG(3, GPIO)
36 #define GPIO4_GPIO PIN_CFG(4, GPIO)
41 #define GPIO5_GPIO PIN_CFG(5, GPIO)
46 #define GPIO6_GPIO PIN_CFG(6, GPIO)
51 #define GPIO7_GPIO PIN_CFG(7, GPIO)
56 #define GPIO8_GPIO PIN_CFG(8, GPIO)
60 #define GPIO9_GPIO PIN_CFG(9, GPIO)
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/soc/davinci/
H A Ddavinci-sffsdr.c103 .dem0_pin = GPIO(45),
104 .dem1_pin = GPIO(46),
105 .pdad_pin = GPIO(47),
106 .pdda_pin = GPIO(38),
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-davinci/
H A Dboard-neuros-osd2.c132 { .name = "led1_green", .gpio = GPIO(10), },
133 { .name = "led1_red", .gpio = GPIO(11), },
134 { .name = "led2_green", .gpio = GPIO(12), },
135 { .name = "led2_red", .gpio = GPIO(13), },
261 * They are a bitmask for GPIO management. According TI
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/zoran/
H A Dzoran_device.h34 extern void GPIO(struct zoran *zr,
H A Dzoran_card.c261 GPIO(zr, 4, 0);
262 GPIO(zr, 5, 1);
264 GPIO(zr, 7, 0);
289 GPIO(zr, 2, 1); // Set Composite input/output
302 GPIO(zr, 4, 1); /* Bt866 SLEEP on */
305 GPIO(zr, 0, 1); /* ZR36060 /RESET on */
306 GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */
307 GPIO(zr, 2, mux & 1); /* MUX S0 */
308 GPIO(zr, 3, 0); /* /FRAME on */
309 GPIO(z
[all...]
H A Dzoran_device.c82 * This is a bit tricky. When a board lacks a GPIO function, the corresponding
83 * GPIO bit number in the card_info structure is set to 0.
87 GPIO (struct zoran *zr, function
251 GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep);
255 "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n",
261 "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n",
278 GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0);
280 GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1);
677 GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val);
688 GPIO(z
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/dvb/dvb-usb/
H A Dec168.h62 GPIO = 0x04, enumerator in enum:ec168_cmd
H A Dec168.c43 case GPIO:
270 req.cmd = GPIO;
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-omap1/
H A Dams-delta-fiq-handler.S24 * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
36 /* GPIO register bitmasks */
111 cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt?
123 gpio: @ GPIO bank interrupt handler
124 ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank
126 ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask
147 ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input
163 @ Mask other GPIO line interrupts till key done
172 @ r8 still contains GPIO input bits
256 ldr r12, omap1510_gpio_base @ set pointer back to GPIO ban
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-davinci/include/mach/
H A Dgpio.h2 * TI DaVinci GPIO Support
31 #define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ macro
33 /* Convert GPIO signal to GPIO pin number */
53 * These are NOT part of the cross-platform GPIO interface
80 * GPIOs (e.g. on GPIO expander chips) use outlined functions.
107 * to the GPIO clock. This is easily seen after calling gpio_set_value()
109 * return the old value until the GPIO clock ticks and the new value gets
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/watchdog/
H A Dit87_wdt.c66 #define GPIO 0x07 macro
85 /* GPIO Configuration Registers LDN=0x07 */
91 /* GPIO Bits WDTCTRL */
99 /* GPIO Bits WDTCFG */
232 superio_select(GPIO);
255 superio_select(GPIO);
288 superio_select(GPIO);
319 superio_select(GPIO);
569 superio_select(GPIO);
698 superio_select(GPIO);
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/sh/kernel/cpu/sh4a/
H A Dsetup-sh7763.c354 SCIF2, GPIO, enumerator in enum:__anon10291
400 INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
401 INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
411 { 0, 0, 0, 0, 0, 0, GPIO, 0,
433 { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
H A Dsetup-sh7780.c413 SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO, enumerator in enum:__anon10293
452 INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
453 INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
463 { 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
480 { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
H A Dsetup-sh7785.c474 FLCTL, GPIO, enumerator in enum:__anon10294
518 INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
519 INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
542 { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
563 { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
H A Dsetup-sh7770.c480 GPIO, enumerator in enum:__anon10292
503 INTC_VECT(GPIO, 0x3e0),
570 DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
574 { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/pci/ctxfi/
H A Dcthw20k1.c1411 gpioorg = (u16)hw_read_20kx(hw, GPIO);
1413 hw_write_20kx(hw, GPIO, gpioorg);
1415 hw_write_20kx(hw, GPIO, gpioorg | 0x2);
1434 gpioorg = (u16)hw_read_20kx(hw, GPIO);
1437 hw_write_20kx(hw, GPIO, gpioorg);
1442 gpioorg = (u16)hw_read_20kx(hw, GPIO);
1444 hw_write_20kx(hw, GPIO, gpioorg);
1479 gpioorg = (u16)hw_read_20kx(hw, GPIO);
1481 hw_write_20kx(hw, GPIO, gpioorg);
1497 data = hw_read_20kx(hw, GPIO);
[all...]
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/sound/pci/ca0106/
H A Dca0106_mixer.c87 val = inl(emu->port + GPIO) & ~0x101;
88 outl(val, emu->port + GPIO);
96 val = inl(emu->port + GPIO) | 0x101;
97 outl(val, emu->port + GPIO);
136 tmp = inl(emu->port+GPIO) & ~0x400;
138 outl(tmp, emu->port+GPIO);
142 tmp = inl(emu->port+GPIO) & ~0x400;
143 outl(tmp, emu->port+GPIO);
H A Dca0106_main.c1432 /* The SB0438 use GPIO differently. */
1433 outl(0x0, chip->port+GPIO);
1434 /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
1435 outl(0x005f5301, chip->port+GPIO); /* Analog */
1437 /* The SB0410 and SB0413 use GPIO differently. */
1438 outl(0x0, chip->port+GPIO);
1439 /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
1440 outl(0x005f5301, chip->port+GPIO); /* Analog */
1442 outl(0x0, chip->port+GPIO);
1443 outl(0x005f03a3, chip->port+GPIO); /* Analo
[all...]
H A Dca0106.h47 * Added GPIO info for SB Live 24bit.
151 #define GPIO 0x18 /* Defaults: 005f03a3-Analog, 005f02a2-SPDIF. */ macro
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/plat-s3c24xx/
H A Dcpu.c174 IODESC_ENT(GPIO),
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/h8300/platform/h8s/edosk2674/
H A Dcrt0_rom.S32 ;BSC/GPIO setup
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/mach-w90x900/
H A Dcpu.c48 IODESC_ENT(GPIO),
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/telephony/
H A Dixj.h172 } GPIO; typedef in typeref:union:__anon16089
1234 GPIO gpio;
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/frv/kernel/
H A Dsleep.S157 # Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
322 # (5) Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/staging/rtl8187se/
H A Dr8180_hw.h234 #define GPIO 0x91 macro
476 #define GPIOCtrl 0x16B // GPIO Control Register.

Completed in 305 milliseconds

12