Searched +hist:0 +hist:b4d4147 (Results 26 - 38 of 38) sorted by last modified time
/linux-master/net/sctp/ | ||
H A D | sysctl.c | diff d1e462a7 Tue Jun 22 12:04:48 MDT 2021 Xin Long <lucien.xin@gmail.com> sctp: add probe_interval in sysctl and sock/asoc/transport PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 046c052b Thu Oct 29 01:05:10 MDT 2020 Xin Long <lucien.xin@gmail.com> sctp: enable udp tunneling socks This patch is to enable udp tunneling socks by calling sctp_udp_sock_start() in sctp_ctrlsock_init(), and sctp_udp_sock_stop() in sctp_ctrlsock_exit(). Also add sysctl udp_port to allow changing the listening sock's port by users. Wit this patch, the whole sctp over udp feature can be enabled and used. v1->v2: - Also update ctl_sock udp_port in proc_sctp_do_udp_port() where netns udp_port gets changed. v2->v3: - Call htons() when setting sk udp_port from netns udp_port. v3->v4: - Not call sctp_udp_sock_start() when new_value is 0. - Add udp_port entry in ip-sysctl.rst. v4->v5: - Not call sctp_udp_sock_start/stop() in sctp_ctrlsock_init/exit(). - Improve the description of udp_port in ip-sysctl.rst. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> diff 34515e94 Thu Nov 07 22:20:35 MST 2019 Xin Long <lucien.xin@gmail.com> sctp: add support for Primary Path Switchover This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 34515e94 Thu Nov 07 22:20:35 MST 2019 Xin Long <lucien.xin@gmail.com> sctp: add support for Primary Path Switchover This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff aef587be Thu Nov 07 22:20:32 MST 2019 Xin Long <lucien.xin@gmail.com> sctp: add pf_expose per netns and sock and asoc As said in rfc7829, section 3, point 12: The SCTP stack SHOULD expose the PF state of its destination addresses to the ULP as well as provide the means to notify the ULP of state transitions of its destination addresses from active to PF, and vice versa. However, it is recommended that an SCTP stack implementing SCTP-PF also allows for the ULP to be kept ignorant of the PF state of its destinations and the associated state transitions, thus allowing for retention of the simpler state transition model of [RFC4960] in the ULP. Not only does it allow to expose the PF state to ULP, but also allow to ignore sctp-pf to ULP. So this patch is to add pf_expose per netns, sock and asoc. And in sctp_assoc_control_transport(), ulp_notify will be set to false if asoc->expose is not 'enabled' in next patch. It also allows a user to change pf_expose per netns by sysctl, and pf_expose per sock and asoc will be initialized with it. Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt, to not allow a user to query the state of a sctp-pf peer address when pf_expose is 'disabled', as said in section 7.3. v1->v2: - Fix a build warning noticed by Nathan Chancellor. v2->v3: - set pf_expose to UNUSED by default to keep compatible with old applications. v3->v4: - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested. - change this patch to 1/5, and move sctp_assoc_control_transport change into 2/5, as Marcelo suggested. - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff c0d8bab6 Thu Mar 09 09:11:12 MST 2017 Xin Long <lucien.xin@gmail.com> sctp: add get and set sockopt for reconf_enable This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would set and get asoc reconf_enable value when asoc_id is set, or it would set and get ep reconf_enalbe value if asoc_id is 0. It is also to add sysctl interface for users to set the default value for reconf_enable. After this patch, stream reconf will work. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff ff5e92c1 Wed Jun 18 17:31:30 MDT 2014 Daniel Borkmann <daniel@iogearbox.net> net: sctp: propagate sysctl errors from proc_do* properly sysctl handler proc_sctp_do_hmac_alg(), proc_sctp_do_rto_min() and proc_sctp_do_rto_max() do not properly reflect some error cases when writing values via sysctl from internal proc functions such as proc_dointvec() and proc_dostring(). In all these cases we pass the test for write != 0 and partially do additional work just to notice that additional sanity checks fail and we return with hard-coded -EINVAL while proc_do* functions might also return different errors. So fix this up by simply testing a successful return of proc_do* right after calling it. This also allows to propagate its return value onwards to the user. While touching this, also fix up some minor style issues. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Fixes: 3c68198e7511 ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
/linux-master/net/netfilter/ | ||
H A D | nf_conntrack_standalone.c | diff f6477ec6 Mon Jan 23 07:31:54 MST 2023 Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> netfilter: conntrack: remote a return value of the 'seq_print_acct' function. The static 'seq_print_acct' function always returns 0. Change the return value to 'void' and remove unnecessary checks. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1ca9e41770cb ("netfilter: Remove uses of seq_<foo> return values") Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 0ed8f619 Wed Jul 06 08:50:04 MDT 2022 Florian Westphal <fw@strlen.de> netfilter: conntrack: fix crash due to confirmed bit load reordering Kajetan Puchalski reports crash on ARM, with backtrace of: __nf_ct_delete_from_lists nf_ct_delete early_drop __nf_conntrack_alloc Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier. conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly' allocated object is still in use on another CPU: CPU1 CPU2 encounter 'ct' during hlist walk delete_from_lists refcount drops to 0 kmem_cache_free(ct); __nf_conntrack_alloc() // returns same object refcount_inc_not_zero(ct); /* might fail */ /* If set, ct is public/in the hash table */ test_bit(IPS_CONFIRMED_BIT, &ct->status); In case CPU1 already set refcount back to 1, refcount_inc_not_zero() will succeed. The expected possibilities for a CPU that obtained the object 'ct' (but no reference so far) are: 1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to the next entry in the list. This happens for objects that are about to be free'd, that have been free'd, or that have been reallocated by __nf_conntrack_alloc(), but where the refcount has not been increased back to 1 yet. 2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit in ct->status. If set, the object is public/in the table. If not, the object must be skipped; CPU2 calls nf_ct_put() to un-do the refcount increment and moves to the next object. Parallel deletion from the hlists is prevented by a 'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one cpu will do the unlink, the other one will only drop its reference count. Because refcount_inc_not_zero is not a full barrier, CPU2 may try to delete an object that is not on any list: 1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU) 2. CONFIRMED test also successful (load was reordered or zeroing of ct->status not yet visible) 3. delete_from_lists unlinks entry not on the hlist, because IPS_DYING_BIT is 0 (already cleared). 2) is already wrong: CPU2 will handle a partially initited object that is supposed to be private to CPU1. Add needed barriers when refcount_inc_not_zero() is successful. It also inserts a smp_wmb() before the refcount is set to 1 during allocation. Because other CPU might still see the object, refcount_set(1) "resurrects" it, so we need to make sure that other CPUs will also observe the right content. In particular, the CONFIRMED bit test must only pass once the object is fully initialised and either in the hash or about to be inserted (with locks held to delay possible unlink from early_drop or gc worker). I did not change flow_offload_alloc(), as far as I can see it should call refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to the skb so its refcount should be >= 1 in all cases. v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon). v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call add comment in nf_conntrack_netlink, no control dependency there due to locks. Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/ Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Diagnosed-by: Will Deacon <will@kernel.org> Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Will Deacon <will@kernel.org> diff 0ed8f619 Wed Jul 06 08:50:04 MDT 2022 Florian Westphal <fw@strlen.de> netfilter: conntrack: fix crash due to confirmed bit load reordering Kajetan Puchalski reports crash on ARM, with backtrace of: __nf_ct_delete_from_lists nf_ct_delete early_drop __nf_conntrack_alloc Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier. conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly' allocated object is still in use on another CPU: CPU1 CPU2 encounter 'ct' during hlist walk delete_from_lists refcount drops to 0 kmem_cache_free(ct); __nf_conntrack_alloc() // returns same object refcount_inc_not_zero(ct); /* might fail */ /* If set, ct is public/in the hash table */ test_bit(IPS_CONFIRMED_BIT, &ct->status); In case CPU1 already set refcount back to 1, refcount_inc_not_zero() will succeed. The expected possibilities for a CPU that obtained the object 'ct' (but no reference so far) are: 1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to the next entry in the list. This happens for objects that are about to be free'd, that have been free'd, or that have been reallocated by __nf_conntrack_alloc(), but where the refcount has not been increased back to 1 yet. 2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit in ct->status. If set, the object is public/in the table. If not, the object must be skipped; CPU2 calls nf_ct_put() to un-do the refcount increment and moves to the next object. Parallel deletion from the hlists is prevented by a 'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one cpu will do the unlink, the other one will only drop its reference count. Because refcount_inc_not_zero is not a full barrier, CPU2 may try to delete an object that is not on any list: 1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU) 2. CONFIRMED test also successful (load was reordered or zeroing of ct->status not yet visible) 3. delete_from_lists unlinks entry not on the hlist, because IPS_DYING_BIT is 0 (already cleared). 2) is already wrong: CPU2 will handle a partially initited object that is supposed to be private to CPU1. Add needed barriers when refcount_inc_not_zero() is successful. It also inserts a smp_wmb() before the refcount is set to 1 during allocation. Because other CPU might still see the object, refcount_set(1) "resurrects" it, so we need to make sure that other CPUs will also observe the right content. In particular, the CONFIRMED bit test must only pass once the object is fully initialised and either in the hash or about to be inserted (with locks held to delay possible unlink from early_drop or gc worker). I did not change flow_offload_alloc(), as far as I can see it should call refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to the skb so its refcount should be >= 1 in all cases. v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon). v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call add comment in nf_conntrack_netlink, no control dependency there due to locks. Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/ Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Diagnosed-by: Will Deacon <will@kernel.org> Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Will Deacon <will@kernel.org> diff 0ed8f619 Wed Jul 06 08:50:04 MDT 2022 Florian Westphal <fw@strlen.de> netfilter: conntrack: fix crash due to confirmed bit load reordering Kajetan Puchalski reports crash on ARM, with backtrace of: __nf_ct_delete_from_lists nf_ct_delete early_drop __nf_conntrack_alloc Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier. conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly' allocated object is still in use on another CPU: CPU1 CPU2 encounter 'ct' during hlist walk delete_from_lists refcount drops to 0 kmem_cache_free(ct); __nf_conntrack_alloc() // returns same object refcount_inc_not_zero(ct); /* might fail */ /* If set, ct is public/in the hash table */ test_bit(IPS_CONFIRMED_BIT, &ct->status); In case CPU1 already set refcount back to 1, refcount_inc_not_zero() will succeed. The expected possibilities for a CPU that obtained the object 'ct' (but no reference so far) are: 1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to the next entry in the list. This happens for objects that are about to be free'd, that have been free'd, or that have been reallocated by __nf_conntrack_alloc(), but where the refcount has not been increased back to 1 yet. 2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit in ct->status. If set, the object is public/in the table. If not, the object must be skipped; CPU2 calls nf_ct_put() to un-do the refcount increment and moves to the next object. Parallel deletion from the hlists is prevented by a 'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one cpu will do the unlink, the other one will only drop its reference count. Because refcount_inc_not_zero is not a full barrier, CPU2 may try to delete an object that is not on any list: 1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU) 2. CONFIRMED test also successful (load was reordered or zeroing of ct->status not yet visible) 3. delete_from_lists unlinks entry not on the hlist, because IPS_DYING_BIT is 0 (already cleared). 2) is already wrong: CPU2 will handle a partially initited object that is supposed to be private to CPU1. Add needed barriers when refcount_inc_not_zero() is successful. It also inserts a smp_wmb() before the refcount is set to 1 during allocation. Because other CPU might still see the object, refcount_set(1) "resurrects" it, so we need to make sure that other CPUs will also observe the right content. In particular, the CONFIRMED bit test must only pass once the object is fully initialised and either in the hash or about to be inserted (with locks held to delay possible unlink from early_drop or gc worker). I did not change flow_offload_alloc(), as far as I can see it should call refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to the skb so its refcount should be >= 1 in all cases. v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon). v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call add comment in nf_conntrack_netlink, no control dependency there due to locks. Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/ Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Diagnosed-by: Will Deacon <will@kernel.org> Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Will Deacon <will@kernel.org> diff 9b1a4d0f Mon Apr 12 13:55:44 MDT 2021 Florian Westphal <fw@strlen.de> netfilter: conntrack: convert sysctls to u8 log_invalid sysctl allows values of 0 to 255 inclusive so we no longer need a range check: the min/max values can be removed. This also removes all member variables that were moved to net_generic data in previous patches. This reduces size of netns_ct struct by one cache line. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 1702ad79 Wed Sep 09 05:29:01 MDT 2020 Florian Westphal <fw@strlen.de> netfilter: conntrack: proc: rename stat column Rename 'searched' column to 'clashres' (same len). conntrack(8) using the old /proc interface (ctnetlink not available) shows: cpu=0 entries=4784 clashres=2292 [..] Another alternative is to add another column, but this increases the number of always-0 columns. Fixes: bc92470413f3af1 ("netfilter: conntrack: add clash resolution stat counter") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 1702ad79 Wed Sep 09 05:29:01 MDT 2020 Florian Westphal <fw@strlen.de> netfilter: conntrack: proc: rename stat column Rename 'searched' column to 'clashres' (same len). conntrack(8) using the old /proc interface (ctnetlink not available) shows: cpu=0 entries=4784 clashres=2292 [..] Another alternative is to add another column, but this increases the number of always-0 columns. Fixes: bc92470413f3af1 ("netfilter: conntrack: add clash resolution stat counter") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 74f99482 Tue Apr 21 09:04:16 MDT 2020 Bodong Wang <bodong@mellanox.com> netfilter: nf_conntrack: add IPS_HW_OFFLOAD status bit This bit indicates that the conntrack entry is offloaded to hardware flow table. nf_conntrack entry will be tagged with [HW_OFFLOAD] if it's offload to hardware. cat /proc/net/nf_conntrack ipv4 2 tcp 6 \ src=1.1.1.17 dst=1.1.1.16 sport=56394 dport=5001 \ src=1.1.1.16 dst=1.1.1.17 sport=5001 dport=56394 [HW_OFFLOAD] \ mark=0 zone=0 use=3 Note that HW_OFFLOAD/OFFLOAD/ASSURED are mutually exclusive. Changelog: * V1->V2: - Remove check of lastused from stats. It was meant for cases such as removing driver module while traffic still running. Better to handle such cases from garbage collector. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 74f99482 Tue Apr 21 09:04:16 MDT 2020 Bodong Wang <bodong@mellanox.com> netfilter: nf_conntrack: add IPS_HW_OFFLOAD status bit This bit indicates that the conntrack entry is offloaded to hardware flow table. nf_conntrack entry will be tagged with [HW_OFFLOAD] if it's offload to hardware. cat /proc/net/nf_conntrack ipv4 2 tcp 6 \ src=1.1.1.17 dst=1.1.1.16 sport=56394 dport=5001 \ src=1.1.1.16 dst=1.1.1.17 sport=5001 dport=56394 [HW_OFFLOAD] \ mark=0 zone=0 use=3 Note that HW_OFFLOAD/OFFLOAD/ASSURED are mutually exclusive. Changelog: * V1->V2: - Remove check of lastused from stats. It was meant for cases such as removing driver module while traffic still running. Better to handle such cases from garbage collector. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> diff 8f14c99c Sun Apr 07 09:14:20 MDT 2019 Tonghao Zhang <xiangxia.m.yue@gmail.com> netfilter: conntrack: limit sysctl setting for boolean options We use the zero and one to limit the boolean options setting. After this patch we only set 0 or 1 to boolean options for nf conntrack sysctl. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
/linux-master/net/ipv6/ | ||
H A D | sysctl_net_ipv6.c | diff 9ee11f0f Tue Jul 20 13:42:57 MDT 2021 Justin Iurman <justin.iurman@uliege.be> ipv6: ioam: Data plane support for Pre-allocated Trace Implement support for processing the IOAM Pre-allocated Trace with IPv6, see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3]. A new per-interface sysctl is introduced. The value is a boolean to accept (=1) or ignore (=0, by default) IPv6 IOAM options on ingress for an interface: - net.ipv6.conf.XXX.ioam6_enabled Two other sysctls are introduced to define IOAM IDs, represented by an integer. They are respectively per-namespace and per-interface: - net.ipv6.ioam6_id - net.ipv6.conf.XXX.ioam6_id The value of the first one represents the IOAM ID of the node itself (u32; max and default value = U32_MAX>>8, due to hop limit concatenation) while the other represents the IOAM ID of an interface (u16; max and default value = U16_MAX). Each "ioam6_id" sysctl has a "_wide" equivalent: - net.ipv6.ioam6_id_wide - net.ipv6.conf.XXX.ioam6_id_wide The value of the first one represents the wide IOAM ID of the node itself (u64; max and default value = U64_MAX>>8, due to hop limit concatenation) while the other represents the wide IOAM ID of an interface (u32; max and default value = U32_MAX). The use of short and wide equivalents is not exclusive, a deployment could choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format) could be an identifier for a physical interface, whereas net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a logical sub-interface. Documentation about new sysctls is provided at the end of this patchset. Two relativistic hash tables are used: one for IOAM namespaces, the other for IOAM schemas. A namespace can only have a single active schema and a schema can only be attached to a single namespace (1:1 relationship). [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net> diff ed13923f Mon May 17 12:15:22 MDT 2021 Ido Schimmel <idosch@OSS.NVIDIA.COM> ipv6: Add a sysctl to control multipath hash fields A subsequent patch will add a new multipath hash policy where the packet fields used for multipath hash calculation are determined by user space. This patch adds a sysctl that allows user space to set these fields. The packet fields are represented using a bitmask and are common between IPv4 and IPv6 to allow user space to use the same numbering across both protocols. For example, to hash based on standard 5-tuple: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037 net.ipv6.fib_multipath_hash_fields = 0x0037 To avoid introducing holes in 'struct netns_sysctl_ipv6', move the 'bindv6only' field after the multipath hash fields. The kernel rejects unknown fields, for example: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000 sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> diff ed13923f Mon May 17 12:15:22 MDT 2021 Ido Schimmel <idosch@OSS.NVIDIA.COM> ipv6: Add a sysctl to control multipath hash fields A subsequent patch will add a new multipath hash policy where the packet fields used for multipath hash calculation are determined by user space. This patch adds a sysctl that allows user space to set these fields. The packet fields are represented using a bitmask and are common between IPv4 and IPv6 to allow user space to use the same numbering across both protocols. For example, to hash based on standard 5-tuple: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037 net.ipv6.fib_multipath_hash_fields = 0x0037 To avoid introducing holes in 'struct netns_sysctl_ipv6', move the 'bindv6only' field after the multipath hash fields. The kernel rejects unknown fields, for example: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000 sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> diff ed13923f Mon May 17 12:15:22 MDT 2021 Ido Schimmel <idosch@OSS.NVIDIA.COM> ipv6: Add a sysctl to control multipath hash fields A subsequent patch will add a new multipath hash policy where the packet fields used for multipath hash calculation are determined by user space. This patch adds a sysctl that allows user space to set these fields. The packet fields are represented using a bitmask and are common between IPv4 and IPv6 to allow user space to use the same numbering across both protocols. For example, to hash based on standard 5-tuple: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037 net.ipv6.fib_multipath_hash_fields = 0x0037 To avoid introducing holes in 'struct netns_sysctl_ipv6', move the 'bindv6only' field after the multipath hash fields. The kernel rejects unknown fields, for example: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000 sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> diff 907eea48 Mon Feb 01 12:47:55 MST 2021 Amit Cohen <amcohen@nvidia.com> net: ipv6: Emit notification when fib hardware flags are changed After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Move fib6_info_hw_flags_set() to C file because it is no longer a short function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> diff 05d44871 Wed Sep 02 07:16:59 MDT 2020 Ido Schimmel <idosch@nvidia.com> ipv6: Fix sysctl max for fib_multipath_hash_policy Cited commit added the possible value of '2', but it cannot be set. Fix it by adjusting the maximum value to '2'. This is consistent with the corresponding IPv4 sysctl. Before: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 0 After: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 2 Fixes: d8f74f0975d8 ("ipv6: Support multipath hashing on inner IP pkts") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 00dc3307 Thu Jun 27 20:37:14 MDT 2019 Eiichi Tsukata <devel@etsukata.com> net/ipv6: Fix misuse of proc_dointvec "flowlabel_reflect" /proc/sys/net/ipv6/flowlabel_reflect assumes written value to be in the range of 0 to 3. Use proc_dointvec_minmax instead of proc_dointvec. Fixes: 323a53c41292 ("ipv6: tcp: enable flowlabel reflection in some RST packets") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
/linux-master/net/ax25/ | ||
H A D | sysctl_net_ax25.c | diff 0ca7a4c8 Thu Apr 19 07:34:18 MDT 2012 Eric W. Biederman <ebiederm@xmission.com> net ax25: Simplify and cleanup the ax25 sysctl handling. Don't register/unregister every ax25 table in a batch. Instead register and unregister per device ax25 sysctls as ax25 devices come and go. This moves ax25 to be a completely modern sysctl user. Registering the sysctls in just the initial network namespace, removing the use of .child entries that are no longer natively supported by the sysctl core and taking advantage of the fact that there are no longer any ordering constraints between registering and unregistering different sysctl tables. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0da974f4 Fri Jul 21 15:51:30 MDT 2006 Panagiotis Issaris <takis@issaris.org> [NET]: Conversions from kmalloc+memset to k(z|c)alloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
/linux-master/net/sunrpc/ | ||
H A D | sysctl.c | diff ae297504 Fri Nov 06 13:50:39 MST 2020 Dan Carpenter <dan.carpenter@oracle.com> net/sunrpc: fix useless comparison in proc_do_xprt() In the original code, the "if (*lenp < 0)" check didn't work because "*lenp" is unsigned. Fortunately, the memory_read_from_buffer() call will never fail in this context so it doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> diff d435c05a Fri Nov 06 13:39:50 MST 2020 Dan Carpenter <dan.carpenter@oracle.com> net/sunrpc: return 0 on attempt to write to "transports" You can't write to this file because the permissions are 0444. But it sort of looked like you could do a write and it would result in a read. Then it looked like proc_sys_call_handler() just ignored it. Which is confusing. It's more clear if the "write" just returns zero. Also, the "lenp" pointer is never NULL so that check can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> diff 941c3ff3 Fri Sep 11 19:37:18 MDT 2015 Kinglong Mee <kinglongmee@gmail.com> Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug The sunrpc debug sysctl files only accept decimal number right now. But all the XXXDBUG_XXX macros are defined as hexadecimal. It is not easy to set or check an separate flag. This patch let those files support accepting hexadecimal number, (decimal number is also supported). Also, display it as hexadecimal. v2, Remove duplicate parsing of '0x...', just using simple_strtol(tmpbuf, &s, 0) Fix a bug of isspace() checking after parsing Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> diff 941c3ff3 Fri Sep 11 19:37:18 MDT 2015 Kinglong Mee <kinglongmee@gmail.com> Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug The sunrpc debug sysctl files only accept decimal number right now. But all the XXXDBUG_XXX macros are defined as hexadecimal. It is not easy to set or check an separate flag. This patch let those files support accepting hexadecimal number, (decimal number is also supported). Also, display it as hexadecimal. v2, Remove duplicate parsing of '0x...', just using simple_strtol(tmpbuf, &s, 0) Fix a bug of isspace() checking after parsing Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/kernel/ | ||
H A D | utsname_sysctl.c | diff 52826d3b Sun Oct 23 01:01:01 MDT 2022 Linus Torvalds <torvalds@linux-foundation.org> kernel/utsname_sysctl.c: Fix hostname polling Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 52826d3b Sun Oct 23 01:01:01 MDT 2022 Linus Torvalds <torvalds@linux-foundation.org> kernel/utsname_sysctl.c: Fix hostname polling Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 52826d3b Sun Oct 23 01:01:01 MDT 2022 Linus Torvalds <torvalds@linux-foundation.org> kernel/utsname_sysctl.c: Fix hostname polling Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 52826d3b Sun Oct 23 01:01:01 MDT 2022 Linus Torvalds <torvalds@linux-foundation.org> kernel/utsname_sysctl.c: Fix hostname polling Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/fs/ocfs2/cluster/ | ||
H A D | nodemanager.c | diff cc725ef3 Tue Mar 05 16:41:41 MST 2019 Jia Guo <guojia12@huawei.com> ocfs2: fix a panic problem caused by o2cb_ctl In the process of creating a node, it will cause NULL pointer dereference in kernel if o2cb_ctl failed in the interval (mkdir, o2cb_set_node_attribute(node_num)] in function o2cb_add_node. The node num is initialized to 0 in function o2nm_node_group_make_item, o2nm_node_group_drop_item will mistake the node number 0 for a valid node number when we delete the node before the node number is set correctly. If the local node number of the current host happens to be 0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while o2hb_thread still running. The panic stack is generated as follows: o2hb_thread \-o2hb_do_disk_heartbeat \-o2hb_check_own_slot |-slot = ®->hr_slots[o2nm_this_node()]; //o2nm_this_node() return O2NM_INVALID_NODE_NUM We need to check whether the node number is set when we delete the node. Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com Signed-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff cc725ef3 Tue Mar 05 16:41:41 MST 2019 Jia Guo <guojia12@huawei.com> ocfs2: fix a panic problem caused by o2cb_ctl In the process of creating a node, it will cause NULL pointer dereference in kernel if o2cb_ctl failed in the interval (mkdir, o2cb_set_node_attribute(node_num)] in function o2cb_add_node. The node num is initialized to 0 in function o2nm_node_group_make_item, o2nm_node_group_drop_item will mistake the node number 0 for a valid node number when we delete the node before the node number is set correctly. If the local node number of the current host happens to be 0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while o2hb_thread still running. The panic stack is generated as follows: o2hb_thread \-o2hb_do_disk_heartbeat \-o2hb_check_own_slot |-slot = ®->hr_slots[o2nm_this_node()]; //o2nm_this_node() return O2NM_INVALID_NODE_NUM We need to check whether the node number is set when we delete the node. Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com Signed-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff cc725ef3 Tue Mar 05 16:41:41 MST 2019 Jia Guo <guojia12@huawei.com> ocfs2: fix a panic problem caused by o2cb_ctl In the process of creating a node, it will cause NULL pointer dereference in kernel if o2cb_ctl failed in the interval (mkdir, o2cb_set_node_attribute(node_num)] in function o2cb_add_node. The node num is initialized to 0 in function o2nm_node_group_make_item, o2nm_node_group_drop_item will mistake the node number 0 for a valid node number when we delete the node before the node number is set correctly. If the local node number of the current host happens to be 0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while o2hb_thread still running. The panic stack is generated as follows: o2hb_thread \-o2hb_do_disk_heartbeat \-o2hb_check_own_slot |-slot = ®->hr_slots[o2nm_this_node()]; //o2nm_this_node() return O2NM_INVALID_NODE_NUM We need to check whether the node number is set when we delete the node. Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com Signed-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff ff8fb335 Tue Jan 21 16:48:20 MST 2014 Goldwyn Rodrigues <rgoldwyn@suse.de> ocfs2: remove versioning information The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0e03036c Wed Feb 14 01:33:57 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: register the ocfs2 sysctl numbers ocfs2 was did not have the binary number it uses under CTL_FS registered in sysctl.h. Register it to avoid future conflicts, and change the name of the definition to be in line with the rest of the sysctl numbers. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 0c83ed8e Thu Dec 15 15:31:23 MST 2005 Kurt Hackel <kurt.hackel@oracle.com> [PATCH] OCFS2: The Second Oracle Cluster Filesystem A simple node information service, filled and updated from userspace. The rest of the stack queries this service for simple node information. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> |
/linux-master/net/dccp/ | ||
H A D | sysctl.c | diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff eec4844f Thu Jul 18 16:58:50 MDT 2019 Matteo Croce <mcroce@redhat.com> proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 8ba7e7bf Mon May 12 20:57:58 MDT 2014 wangweidong <wangweidong1@huawei.com> dccp: make the request_retries minimum is 1 In Documentation/networking/dccp.txt points that request_retries should be greater than 0. So make the extra1 to be &one instead of &zero. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net> diff 883ca833 Fri Jan 16 16:36:32 MST 2009 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> diff 883ca833 Fri Jan 16 16:36:32 MST 2009 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> diff 883ca833 Fri Jan 16 16:36:32 MST 2009 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> diff 883ca833 Fri Jan 16 16:36:32 MST 2009 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> diff 4098dce5 Mon Dec 08 02:18:37 MST 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Remove manual influence on NDP Count feature Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature uses the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> diff 0a482267 Wed Sep 03 23:30:19 MDT 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> diff 0a482267 Wed Sep 03 23:30:19 MDT 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> diff 0a482267 Wed Sep 03 23:30:19 MDT 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> diff 0a482267 Wed Sep 03 23:30:19 MDT 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> diff 0a482267 Wed Sep 03 23:30:19 MDT 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> |
/linux-master/net/rose/ | ||
H A D | sysctl_net_rose.c | diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/net/netrom/ | ||
H A D | sysctl_net_netrom.c | diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff d3706566 Tue Apr 09 05:53:55 MDT 2019 YueHaibing <yuehaibing@huawei.com> net: netrom: Fix error cleanup path of nr_proto_init Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
/linux-master/net/appletalk/ | ||
H A D | sysctl_net_atalk.c | diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 6377f787 Thu Feb 28 19:57:57 MST 2019 YueHaibing <yuehaibing@huawei.com> appletalk: Fix use-after-free in atalk_proc_exit KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
/linux-master/net/x25/ | ||
H A D | sysctl_net_x25.c | diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
/linux-master/net/llc/ | ||
H A D | sysctl_net_llc.c | diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 0b4d4147 Wed Feb 14 01:34:09 MST 2007 Eric W. Biederman <ebiederm@xmission.com> [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
Completed in 544 milliseconds