Searched refs:printf (Results 226 - 250 of 2017) sorted by relevance

1234567891011>>

/u-boot/arch/arm/cpu/armv8/
H A Dsec_firmware.c101 printf("%s: Cannot find /images node: %d\n", __func__, images);
113 printf("SEC Firmware: '%s' present in config\n", type);
117 printf("%s: '%s'\n", type, str);
120 printf("cannot find image node '%s': %d\n", str,
127 printf("SEC Loadable: Bad loadable image (bad CRC)\n");
133 printf("SEC Loadable: Can't get subimage data/size");
139 printf("SEC Loadable: Can't get subimage load");
255 printf("SEC Firmware: error (%d)\n", ret);
273 printf("SEC Firmware: Bad firmware image (not a FIT image)\n");
278 printf("SE
[all...]
/u-boot/cmd/
H A Darmflash.c44 printf("bad checksumming\n");
67 printf("Bank %lu: missing or unknown FLASH type\n", bank);
71 printf("Bank %lu: no FLASH sectors\n", bank);
143 printf("BAD CRC on ARM image info\n");
144 printf("(continuing anyway)\n");
195 printf("image \"%s\" not found in flash\n", name);
209 printf("no valid load address\n");
216 printf("loaded region %d from %08lX to %08lX, %08X bytes\n",
239 printf("Image: \"%s\" (v%d):\n", afi->name, afi->version);
240 printf(" Entr
[all...]
H A Defi.c117 printf("Memory map contains invalid entry type %u\n",
160 printf(" # %-14s %10s %10s %10s %s\n", "Type", "Physical",
174 printf(" %-14s %010llx %10s %010llx\n", "<gap>",
181 printf("%2d %x:%-12s %010llx %010llx %010llx ", upto,
186 printf("%llx", desc->attribute & ~EFI_MEMORY_RUNTIME);
198 printf("\nAttributes key:\n");
204 printf("%c%llx: ", (attr & EFI_MEMORY_RUNTIME) ? 'r' : ' ',
211 printf(", ");
212 printf("%s", mem_attr[j].name);
218 printf("*Som
[all...]
H A Dsf.c146 printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
157 printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
247 printf(" \rUpdating, %zu%% %lu B/s",
262 printf("SPI flash failed in %s step\n", err_oper);
267 printf("%zu bytes written, %zu bytes skipped", len - skipped,
269 printf(" in %ld.%lds, speed %ld B/s\n",
297 printf("ERROR: attempting %s past flash size (%#x)\n",
304 printf("ERROR: flash area is locked\n");
326 printf("SF: %zu bytes @ %#x %s: ", (size_t)len, (u32)offset,
329 printf("ERRO
[all...]
/u-boot/board/freescale/m5253demo/
H A Dflash.c83 printf("SST ");
86 printf("Unknown Vendor ");
92 printf("SST39VF6401B\n");
95 printf("Unknown Chip Type\n");
99 printf(" Size: %ld KB in %d Sectors\n",
102 printf(" Sector Start Addresses:");
105 printf("\n ");
106 printf(" %08lX%s",
109 printf("\n");
129 printf("Unknow
[all...]
/u-boot/board/xilinx/common/
H A Dfru_ops.c34 printf("FRU_ERROR: Only English Language is supported\n");
230 printf("Board area require minimum %d fields\n",
282 printf("%s Common header CRC error\n", __func__);
332 printf("*****BOARD INFO*****\n");
333 printf("Version:%d\n", fru_version(brd->ver));
334 printf("Board Area Length:%d\n", fru_cal_area_len(brd->len));
344 printf("Time in Minutes from 0:00hrs 1/1/96: %d\n", time);
368 printf(" %s: 0x%x\n", boardinfo[i], *data);
372 printf(" %s: %s\n", boardinfo[i], data);
389 printf("*****COMMO
[all...]
/u-boot/fs/cramfs/
H A Dcramfs.c67 printf ("cramfs: wrong magic\n");
78 printf ("cramfs: unsupported filesystem features\n");
84 printf ("cramfs: root is not a directory\n");
89 printf ("cramfs: empty filesystem");
93 printf ("cramfs: bad root offset %lu\n", root_offset);
169 printf ("unsupported symlink to non-terminal path\n");
175 printf ("%*.*s: Error reading link\n",
179 printf ("unsupported symlink to absolute path\n");
191 printf ("%*.*s: unsupported file type (%x)\n",
201 printf ("ca
[all...]
/u-boot/cmd/mvebu/
H A Dbubt.c200 printf("No SD/MMC/eMMC card found\n");
206 printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
214 printf("Error - failed to obtain block descriptor\n");
237 printf("Error - MMC partition switch failed\n");
277 printf("Error - MMC failed to switch back to original partition\n");
281 printf("Error - written %#lx blocks\n", blk_written);
284 printf("Done!\n");
298 printf("No SD/MMC/eMMC card found\n");
303 printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
310 printf("Erro
[all...]
/u-boot/drivers/ddr/marvell/a38x/
H A Dddr3_debug.c140 printf("-- dunit registers --\n");
142 printf("0x%x ", reg_addr);
149 printf("0x%x ", read_data[if_id]);
151 printf("\n");
154 printf("-- Phy registers --\n");
156 printf("0x%x ", reg_addr);
168 printf("0x%x ", data_value);
179 printf("0x%x ", data_value);
182 printf("\n");
330 printf("
[all...]
/u-boot/drivers/mtd/ubispl/
H A Dubispl.h127 #define ubi_dbg(fmt, ...) printf("UBI: debug:" fmt "\n", ##__VA_ARGS__)
135 #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
138 #define ubi_warn(fmt, ...) printf("UBI warning: " fmt "\n", ##__VA_ARGS__)
140 #define ubi_err(fmt, ...) printf("UBI error: " fmt "\n", ##__VA_ARGS__)
/u-boot/tools/
H A Dspl_size_limit.c31 printf("%d", spl_size_limit);
/u-boot/board/google/chameleonv3/
H A Dboard.c19 printf("couldn't read mac address: %s\n", errno_str(res));
/u-boot/doc/imx/habv4/csf_examples/mx8m/
H A Dcsf.sh45 spl_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SPL_TEXT_BASE=/ s@.*=@@p" .config) - 0x40)) )
46 spl_block_size=$(printf "0x%x" $(stat -tc %s u-boot-spl-ddr.bin))
61 fit_block_base=$(printf "0x%x" $(sed -n "/CONFIG_SPL_LOAD_FIT_ADDRESS=/ s@.*=@@p" .config) )
62 fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset))
63 fit_block_size=$(printf "0x%x" $(( ( ( $(stat -tc %s u-boot.itb) + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) )
67 ivt_ptr_base=$(printf "%08x" ${fit_block_base} | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
68 ivt_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} - 0x20 )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
69 csf_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
/u-boot/scripts/
H A Ddtc-version.sh14 printf "Usage:\n\t$0 <dtc-command>\n"
27 printf "%02d%02d%02d\\n" $MAJOR $MINOR $PATCH
/u-boot/arch/arm/mach-imx/imx9/
H A Dimx_bootaux.c26 printf("## Stopping auxiliary core\n");
41 printf("## Starting auxiliary core addr = 0x%08lX...\n", addr);
81 printf("## Auxiliary core is already up\n");
104 printf("## Auxiliary core is already down\n");
/u-boot/arch/arm/mach-socfpga/
H A Dspl_n5x.c60 printf("Clock init failed: %d\n", ret);
66 printf("Memory clock init failed: %d\n", ret);
77 printf("CCU init failed: %d\n", ret);
84 printf("DRAM init failed: %d\n", ret);
/u-boot/drivers/net/ldpaa_eth/
H A Dldpaa_eth.c64 printf("dpni_get_stats(%d) failed\n", j);
93 printf("dpmac_get_counter(%d) failed\n", i);
113 printf("DPNI counters:\n");
115 printf(" %s: %llu\n", ldpaa_eth_dpni_stat_strings[i], data[i]);
122 printf("DPMAC counters:\n");
124 printf(" %s: %llu\n", ldpaa_eth_dpmac_stat_strings[i], data[i]);
154 printf("Rx frame error(s): 0x%08x\n",
158 printf("Unsupported feature in bitmask: 0x%08x\n",
179 printf("Rx frame: QBMAN buffer release fails\n");
203 printf("Dequeu
[all...]
/u-boot/drivers/misc/imx8/
H A Dfuse.c44 printf("Invalid bank argument, ONLY bank 0 is supported\n");
60 printf("Invalid bank argument, ONLY bank 0 is supported\n");
67 printf("Invalid word argument for this SoC\n");
93 printf("Override fuse to i.MX8 in u-boot is forbidden\n");
/u-boot/board/phytec/phycore_rk3288/
H A Dphycore-rk3288.c47 printf("%s: No eeprom0 path offset\n", __func__);
53 printf("%s: Could not find EEPROM\n", __func__);
64 printf("%s: Could not read EEPROM\n", __func__);
69 printf("Invalid data or wrong EEPROM layout version.\n");
/u-boot/board/ti/ks2_evm/
H A Dddr3_k2hk.c23 printf("Sorry, I don't know how to configure DDR3A.\n"
29 printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name);
33 printf("DDR3 speed %d\n", spd_cb.ddrspdclock);
60 printf("DRAM: %d GiB (includes reported below)\n", ddr3_size);
/u-boot/board/nvidia/p2771-0000/
H A Dp2771-0000.c27 printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
34 printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
50 printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
57 printf("i2c_write 0 0x3c 0x31 failed: %d\n", ret);
/u-boot/board/freescale/ls2080aqds/
H A Dls2080aqds.c73 printf("Board: %s-QDS, ", buf);
76 printf("Board Arch: V%d, ", sw >> 4);
77 printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
85 printf("vBank: %d\n", sw);
93 printf("IFCCard\n");
95 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
97 printf("FPGA: v%d (%s), build %d",
101 printf(" on %s", qixis_read_time(buf));
114 printf("Clock1 = %sMHz ", freq[clock]);
116 printf("Clock
[all...]
/u-boot/board/freescale/m5272c3/
H A Dm5272c3.c41 printf ("DRAM test not implemented!\n");
/u-boot/arch/arm/lib/
H A Deabi_compat.c12 /* Even if printf() is available, it's large. Punt it for SPL builds */
14 printf("raise: Signal # %d caught\n", signum);
/u-boot/api/
H A Dapi_net.c18 #define debugf(fmt, args...) do { printf("%s(): ", __func__); printf(fmt, ##args); } while (0)
23 #define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)

Completed in 520 milliseconds

1234567891011>>