/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/pcmcia/ |
H A D | topic.h | 43 #define TOPIC_SLOT_ID_WP 0x10 50 #define TOPIC_CCR_INTA 0x10 58 #define TOPIC97_ICR_INTA 0x10 86 #define TOPIC97_MISC1_DETECT_REQ_ENA 0x10 88 #define TOPIC97_MISC1_R2_LOW_ENABLE 0x10
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/mn10300/unit-asb2305/ |
H A D | leds.c | 22 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c 72 leds = asb2305_led_hex_tbl[(code/0x100) % 0x10]; 74 leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10]; 76 leds |= asb2305_led_hex_tbl[code % 0x10];
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/mfd/pcf50633/ |
H A D | mbc.h | 36 PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ 69 PCF50633_MBCC8_USBENASUS = 0x10, 78 PCF50633_MBCS1_TBAT_ABOVE = 0x10, 102 PCF50633_MBCS2_CHGS_ADAPTER = 0x10, 113 PCF50633_MBCS3_ILIM = 0x10, /* 1: Ibat > Icutoff */
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/ |
H A D | ewrk3.h | 34 #define EWRK3_DATA iobase+0x10 /* Data Register */ 78 #define CR_FDUP 0x10 /* Full DUPlex enable */ 99 #define TSR_ECL 0x10 /* Excessive CoLlisions */ 123 #define CMR_POLARITY 0x10 /* Informational */ 135 #define R_IAM 0x10 /* Individual Address Match */ 147 #define TCR_QMODE 0x10 /* Q_MODE */ 160 #define T_NCL 0x10 /* No Carrier Loopback */ 201 #define EEPROM_SWFLAGS 0x10 245 #define SW_SQE 0x10 /* Signal Quality Error */ 257 #define SETUP_1TP 0x10 /* [all...] |
H A D | mace.h | 59 #define MORE 0x10 /* 2 or more retries needed to xmit frame */ 101 #define RCVCCO 0x10 /* RCVCC overflow */ 115 #define XMTSP_16 0x10 /* start xmitting when 16 bytes in FIFO */ 125 #define RCVFW_32 0x10 /* 32 bytes avail */ 153 #define DAPC 0x10 /* disable auto receiver polarity correction */ 168 #define FCOLL 0x10 /* force collision */
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/mmc/host/ |
H A D | wbsd.h | 33 #define WBSD_PINS_DAT3_OUT 0x10 49 #define WBSD_EINT_CRC 0x10 58 #define WBSD_INT_CRC 0x10 67 #define WBSD_FIFO_FUTHRE 0x10 71 #define WBSD_POWER_N 0x10 83 #define WBSD_IDX_STATUS 0x10 121 #define WBSD_FIFOEN_FULL 0x10
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/usb/serial/ |
H A D | io_16654.h | 64 #define IER_SLEEP 0x10 // Enable sleep mode 77 #define FCR_TX_LEVEL_16 0x10 // Tx FIFO Level = 16 bytes 93 #define ISR_INT_RX_XOFF 0x10 // Rx Xoff int pending 129 #define MCR_LOOPBACK 0x10 // Set internal (digital) loopback mode 139 #define LSR_BREAK 0x10 // Rx break condition detected 149 #define EDGEPORT_MSR_CTS 0x10 // Current state of CTS 189 #define EFR_ENABLE_16654 0x10 // Enable 16C654 features
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/char/ |
H A D | riscom8_reg.h | 44 #define RC_ID 0x10 83 #define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ 120 #define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ 160 #define IER_RXD 0x10 /* Enable interrupt on Receive Data */ 174 #define COR1_IGNORE 0x10 /* Ignore Parity on RX */ 191 #define COR2_LLM 0x10 /* Local Loopback Mode */ 203 #define COR3_SCDE 0x10 /* Special Character Detection Enable */
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/m68k/include/asm/ |
H A D | mcfuart.h | 72 #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ 73 #define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ 99 #define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ 117 #define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ 129 #define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ 153 #define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ 171 #define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/mips/include/asm/sgi/ |
H A D | ioc.h | 49 #define SGINT_ISTAT0_GFXDMA 0x10 61 #define SGINT_ISTAT1_HPC3 0x10 98 #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ 133 #define SGIOC_PANEL_VOLDNINTR 0x10 153 #define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ 162 #define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ 171 #define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/arm/plat-omap/include/plat/ |
H A D | omap16xx.h | 64 #define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) 72 #define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) 80 #define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) 88 #define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) 137 #define UART3_MCR (OMAP1_UART3_BASE + 0x10) 138 #define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10) 175 #define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/serial/ |
H A D | pmac_zilog.h | 157 #define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ 176 #define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ 192 #define ENT_HM 0x10 /* Enter Hunt Mode */ 212 #define BISYNC 0x10 /* 16 bit sync character */ 228 #define SND_BRK 0x10 /* Send Break */ 250 #define STATHI 0x10 /* Status high */ 261 #define GAOP 0x10 /* Go active on poll */ 276 #define TCBR 0x10 /* Transmit clock = BR Generator output */ 293 #define LOOPBAK 0x10 /* Local loopback */ 307 #define SYNCIE 0x10 /* Syn [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/minidlna/ffmpeg-2.3.4/libswscale/ppc/ |
H A D | yuv2rgb_altivec.c | 148 perm_rgb_0 = { 0x00, 0x01, 0x10, 0x02, 0x03, 0x11, 0x04, 0x05, 152 perm_rgb_2 = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 229 0x10, 0x00, 0x10, 0x01, 0x10, 0x02, 0x10, 0x03, \ 230 0x10, 0x04, 0x10, 0x05, 0x10, 0x06, 0x10, [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/ap/gpl/iserver/libav-0.8.8/libswscale/ppc/ |
H A D | yuv2rgb_altivec.c | 145 perm_rgb_0 = {0x00,0x01,0x10,0x02,0x03,0x11,0x04,0x05, 149 perm_rgb_2 = {0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 225 ((vector unsigned char){0x10,0x00,0x10,0x01,0x10,0x02,0x10,0x03,\ 226 0x10,0x04,0x10,0x05,0x10,0x06,0x10, [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/video/via/ |
H A D | hw.c | 479 /* Index 0x10~0x13 */ 496 {0x00, 0x00, 0x3F}, {0x10, 0x00, 0x3F}, {0x1F, 0x00, 0x3F}, {0x2F, 502 0x10}, 504 {0x3F, 0x00, 0x00}, {0x3F, 0x10, 0x00}, {0x3F, 0x1F, 0x00}, {0x3F, 508 {0x3F, 0x3F, 0x00}, {0x2F, 0x3F, 0x00}, {0x1F, 0x3F, 0x00}, {0x10, 512 {0x00, 0x3F, 0x00}, {0x00, 0x3F, 0x10}, {0x00, 0x3F, 0x1F}, {0x00, 517 0x10, 640 {0x00, 0x00, 0x10}, {0x04, 0x00, 0x10}, {0x08, 0x00, 0x10}, { [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/hwmon/ |
H A D | lis3lv02d.h | 106 CTRL1_DF0 = 0x10, 115 CTRL1_STP = 0x10, 126 CTRL2_BOOT = 0x10, 140 CTRL3_FDS = 0x10, 151 STATUS_XOR = 0x10, 162 FF_WU_CFG_ZLIE = 0x10, 173 FF_WU_SRC_ZL = 0x10, 183 DD_CFG_ZLIE = 0x10, 194 DD_SRC_ZL = 0x10, 204 CLICK_SINGLE_Z = 0x10, [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/include/linux/mfd/ |
H A D | twl4030-codec.h | 43 #define TWL4030_REG_ARXR1PGA 0x10 104 #define TWL4030_APLL_RATE_11025 0x10 143 #define TWL4030_MICAMPL_EN 0x10 150 #define TWL4030_MICAMPR_EN 0x10 174 #define TWL4030_AIF_FORMAT_RIGHT 0x10 184 #define TWL4030_VIF_SWAP 0x10 213 #define TWL4030_RAMP_DELAY_323MS 0x10 234 #define TWL4030_HF_CTL_RAMP_EN 0x10 238 #define TWL4030_APLL_EN 0x10 258 #define TWL4030_VIBRA_SEL 0x10 [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/scsi/ |
H A D | aha152x.h | 33 #define SIMODE0 (HOSTIOPORT1+0x10) /* SCSI interrupt mode 0 */ 67 #define ENRESELI 0x10 77 #define CLRSTCNT 0x10 94 #define SIG_ATNI 0x10 113 #define SIG_ATNO 0x10 142 #define SELINGO 0x10 151 #define CLRSELINGO 0x10 161 #define PHASEMIS 0x10 177 #define SEMPTY 0x10 203 #define ENSELINGO 0x10 [all...] |
H A D | initio.h | 65 #define TUL_PBAD 0x10 /* Base address */ 179 #define TSC_FLUSH_FIFO 0x10 /* Flush FIFO */ 190 #define TSC_PWDN 0x10 /* Power down mode */ 202 #define TSC_DMA_8BIT 0x10 /* Alternate dma 8-bits mode */ 225 #define TSC_SELI 0x10 /* SEL signal */ 238 #define TSS_FIFO_EMPTY 0x10 /* FIFO empty */ 248 #define TSS_DATA_PH_CMP 0x10 /* Data phase done */ 260 #define TSS_TIMEOUT_0 0x10 /* Timeout counter zero */ 272 #define TSS_SCSIRST_INT 0x10 /* SCSI bus reset detected */ 309 #define SCMP 0x10 [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/gspca/ |
H A D | sonixb.c | 26 0x10 high nibble red gain low nibble blue gain 105 #define MODE_RAW 0x10 /* raw bayer mode */ 311 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c 314 {0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10}, 315 {0xa0, 0x11, 0x01, 0x08, 0x2a, 0x2e, 0x00, 0x10}, 316 {0xb0, 0x11, 0x20, 0x00, 0xd0, 0x2e, 0x00, 0x10}, 318 {0xa0, 0x11, 0x30, 0x10, 0x0e, 0x28, 0x00, 0x15}, 324 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 333 {0xa0, 0x60, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, [all...] |
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/video/zoran/ |
H A D | zr36050.h | 120 #define ZR050_HW_CFIS_5_CLK 0x10 132 #define ZR050_MO_TLM 0x10 138 #define ZR050_MO_TLM 0x10 151 #define ZR050_OP_OVF 0x10 159 #define ZR050_ME_DQT 0x10 172 #define ZR050_ST_RFM_MASK 0x10
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/isdn/hardware/mISDN/ |
H A D | hfc_pci.h | 96 #define HFCPCI_TIMER_ELAP 0x10 104 #define HFCPCI_TIM25 0x10 123 #define HFCPCI_INTS_B2REC 0x10 137 #define HFCPCI_LOAD_STATE 0x10 156 #define SCTRL_SQ_ENA 0x10 170 #define HFCPCI_FIFOEN_DTX 0x10
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/isdn/hisax/ |
H A D | hfc_pci.h | 95 #define HFCPCI_TIMER_ELAP 0x10 103 #define HFCPCI_TIM25 0x10 122 #define HFCPCI_INTS_B2REC 0x10 136 #define HFCPCI_LOAD_STATE 0x10 152 #define SCTRL_SQ_ENA 0x10 168 #define HFCPCI_FIFOEN_DTX 0x10
|
H A D | hfc_sx.h | 86 #define HFCSX_FIF_SEL 0x10 101 #define HFCSX_TIMER_ELAP 0x10 109 #define HFCSX_TIM25 0x10 129 #define HFCSX_INTS_B2REC 0x10 142 #define HFCSX_LOAD_STATE 0x10 158 #define SCTRL_SQ_ENA 0x10
|
/netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/media/dvb/frontends/ |
H A D | nxt6000_priv.h | 66 #define BER_OVERFLOW (0x10) 92 #define HOLDSM (0x10) 101 #define AGCLOCKED (0x10) 121 #define AGCLAST (0x10) 164 #define GI14_SYR_LOCK (0x10) 271 #define TB_SET (0x10)
|