Searched hist:9821 (Results 1 - 25 of 25) sorted by relevance
| /freebsd-10.0-release/sys/modules/syscons/dragon/ | ||
| H A D | Makefile | 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/dev/mse/ | ||
| H A D | msevar.h | 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| H A D | mse_cbus.c | 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| H A D | mse_isa.c | 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| H A D | mse.c | diff 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| /freebsd-10.0-release/sys/dev/syscons/dragon/ | ||
| H A D | dragon_saver.c | 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/modules/mse/ | ||
| H A D | Makefile | 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| /freebsd-10.0-release/sys/pc98/cbus/ | ||
| H A D | 30line.h | diff 64392 Tue Aug 08 07:17:15 MDT 2000 nyan Fixed PC-9821 NOTE supports with LINE30 mode. Submitted by: Tomokazu HARADA <tkhara@osk4.3web.ne.jp> |
| H A D | gdc.c | diff 64392 Tue Aug 08 07:17:15 MDT 2000 nyan Fixed PC-9821 NOTE supports with LINE30 mode. Submitted by: Tomokazu HARADA <tkhara@osk4.3web.ne.jp> |
| /freebsd-10.0-release/sys/modules/sk/ | ||
| H A D | Makefile | diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| /freebsd-10.0-release/sys/modules/syscons/ | ||
| H A D | Makefile | diff 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/dev/sk/ | ||
| H A D | xmaciireg.h | diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| H A D | if_skreg.h | diff 158586 Mon May 15 02:50:33 MDT 2006 yongari Re-wrok PHY setup, media handling and dual-port detection. With this change SysKonnect SK-9521 v2.0 and SK-9821 v2.0 adapter now works. Obtained from: OpenBSD Reported by: Ganbold ganbold ! micom ( mng $ net Tested by: Ganbold ganbold ! micom ( mng $ net diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| H A D | if_sk.c | diff 158586 Mon May 15 02:50:33 MDT 2006 yongari Re-wrok PHY setup, media handling and dual-port detection. With this change SysKonnect SK-9521 v2.0 and SK-9821 v2.0 adapter now works. Obtained from: OpenBSD Reported by: Ganbold ganbold ! micom ( mng $ net Tested by: Ganbold ganbold ! micom ( mng $ net diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| /freebsd-10.0-release/sys/dev/syscons/fire/ | ||
| H A D | fire_saver.c | diff 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/dev/syscons/logo/ | ||
| H A D | logo_saver.c | diff 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/dev/syscons/rain/ | ||
| H A D | rain_saver.c | diff 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/dev/syscons/warp/ | ||
| H A D | warp_saver.c | diff 93011 Sat Mar 23 10:36:19 MST 2002 amorita Add new graphical screen saver (dragon_saver). Add support for NEC PC-9821 PEGC screen (fire/logo/rain/warp_saver). |
| /freebsd-10.0-release/sys/modules/mii/ | ||
| H A D | Makefile | diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| /freebsd-10.0-release/usr.sbin/lpr/lpd/ | ||
| H A D | printjob.c | diff 9821 Mon Jul 31 11:59:45 MDT 1995 wpaul The other day someone brought me an old Apple Laserwriter II with a serial interface set at 57600 baud, and I found out the hard way that lpd doesn't know about speeds greater than 38400, even though <sys/ttydev.h> also permits 57600 and 115200 baud. Fix this by adding B57600 and B115200 to the 'bauds' table. (The Apple printer worked properly once I did this, BTW. :) |
| /freebsd-10.0-release/sys/dev/sound/isa/ | ||
| H A D | mss.c | diff 169744 Sat May 19 08:53:01 MDT 2007 joel Fix detection of PC-9821 V166 internal sound card. PR: kern/105600 Submitted by: rotus <rotus@takamanohara.dyndns.org> Approved by: ariff |
| /freebsd-10.0-release/sys/conf/ | ||
| H A D | files.pc98 | diff 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| H A D | files.i386 | diff 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
| H A D | files | diff 59478 Sat Apr 22 00:16:41 MDT 2000 wpaul Reoganize/update the SysKonnect driver: - Break out the support for the XMAC II's PHY into an miibus driver. - Reorganize the probe/attach stuff using newbus. Each XMAC is now attached to the parent GEnesis controller using newbus. This is necessary since each XMAC must also have an attached miibus, and the miibus read/write register routines need to be able to get at the softc struct for each XMAC, not the one for the parent controller. This allows me to get rid of the grotty code I added for selecting the unit numbers for the ifnet interfaces: the unit numbers are now derived from the newbus-assigned unit numbers, which should track with the ifnet interface numbers. I think. At the very least, there should never be any collisions. - Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special thanks to SysKonnect for loaning me two adapters for testing. |
| /freebsd-10.0-release/sys/modules/ | ||
| H A D | Makefile | diff 138755 Sun Dec 12 18:05:50 MST 2004 imp Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san |
Completed in 1022 milliseconds