Searched hist:92922 (Results 1 - 2 of 2) sorted by relevance
/linux-master/drivers/net/wireless/ath/ath10k/ | ||
H A D | wmi.h | diff cb188e86 Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: use flexible array in struct wmi_tdls_peer_capabilities Currently struct wmi_tdls_peer_capabilities defines: struct wmi_channel peer_chan_list[1]; Per the guidance in [1] this should be a flexible array, and at one point Gustavo was trying to fix this [2], but had questions about the correct behavior when the associated peer_chan_len is 0. I have been unable to determine if firmware requires that at least one record be present even if peer_chan_len is 0. But since that is the current behavior, follow the example from [3] and replace the one-element array with a union that contains both a flexible array and a single instance of the array element. This results in a struct that has the same footprint as the original, so no other driver changes are required. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays [2] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/ [3] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-5-92922d92fa2c@quicinc.com diff b0c0794b Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: remove unused template structs Currently both the wmi_bcn_tmpl_cmd and wmi_prb_tmpl_cmd structs define: u8 data[1]; Per the guidance in [1] both instances of this should be flexible arrays. However during conversion it was discovered that neither of these structs are actually used, so just remove them. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-4-92922d92fa2c@quicinc.com diff 26eb704a Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: remove struct wmi_pdev_chanlist_update_event Currently struct wmi_pdev_chanlist_update_event defines: struct wmi_channel channel_list[1]; Per the guidance in [1] this should be a flexible array. However during conversion it was discovered that this struct is not used, so just remove the entire struct. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-3-92922d92fa2c@quicinc.com diff 72ca7c40 Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: use flexible arrays for WMI start scan TLVs Currently ath10k defines the following struct: struct wmi_start_scan_tlvs { u8 tlvs[0]; } __packed; Per the guidance in [1] this should be a flexible array. However, a direct replace to u8 tlvs[] results in the compilation error: flexible array member in a struct with no named members This is because C99 6.7.2.1 (16) requires that a structure containing a flexible array member must have more than one named member. So rather than defining a separate struct wmi_start_scan_tlvs which contains the flexible tlvs[] array, just define the tlvs[] array where struct wmi_start_scan_tlvs is being used. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-2-92922d92fa2c@quicinc.com diff d2eb318f Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: use flexible array in struct wmi_host_mem_chunks Currently struct wmi_host_mem_chunks defines: struct host_memory_chunk items[1]; Per the guidance in [1] this should be a flexible array. However there is a documented requirement: some fw revisions require at least 1 chunk regardless of count To satisfy this requirement, follow the guidance from [2] and wrap the array in a union which contains both the flexible array and a single instance of the underlying struct. Since the footprint of the struct is unchanged, no additional driver changes are required. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays [2] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-1-92922d92fa2c@quicinc.com |
H A D | wmi.c | diff 6b9923f1 Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: remove duplicate memset() in 10.4 TDLS peer update In [1] it was identified that in ath10k_wmi_10_4_gen_tdls_peer_update() the memset(skb->data, 0, sizeof(*cmd)) is unnecessary since function ath10k_wmi_alloc_skb() already zeroes skb->data, so remove it. No functional changes, compile tested only. [1] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-6-92922d92fa2c@quicinc.com diff 72ca7c40 Sun Dec 17 04:29:03 MST 2023 Jeff Johnson <quic_jjohnson@quicinc.com> wifi: ath10k: use flexible arrays for WMI start scan TLVs Currently ath10k defines the following struct: struct wmi_start_scan_tlvs { u8 tlvs[0]; } __packed; Per the guidance in [1] this should be a flexible array. However, a direct replace to u8 tlvs[] results in the compilation error: flexible array member in a struct with no named members This is because C99 6.7.2.1 (16) requires that a structure containing a flexible array member must have more than one named member. So rather than defining a separate struct wmi_start_scan_tlvs which contains the flexible tlvs[] array, just define the tlvs[] array where struct wmi_start_scan_tlvs is being used. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-2-92922d92fa2c@quicinc.com |
Completed in 197 milliseconds