Searched hist:90 (Results 76 - 100 of 186) sorted by relevance

12345678

/freebsd-10-stable/lib/libc/sys/
H A D_exit.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dgetpid.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dgetgid.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Daccess.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dclose.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dlink.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dmkdir.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
H A Dsigprocmask.2diff 20097 Mon Dec 02 18:03:58 MST 1996 wosch upgrade STANDARDS from POSIX 1003.1-88 to 1003.1-90 using .St macro
use ``is expected to conform to'' phrase, not ``conforms to''

Pointed out by: Bruce->NIST-PCTS
/freebsd-10-stable/lib/csu/mips/
H A DMakefilediff 217375 Thu Jan 13 18:59:17 MST 2011 dim Apply a workaround for a binutils issue with the .note.ABI-tag section
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or Scrt1.o).

For all arches except sparc, gcc emits the section directive for the
abitag struct in crtbrand.c with a PROGBITS type. However, newer
versions of binutils (after 2.16.90) require the section to be of NOTE
type, to guarantee that the .note.ABI-tag section correctly ends up in
the first page of the final executable.

Unfortunately, there is no clean way to tell gcc to use another section
type, so crtbrand.c (or the C files that include it) must be compiled in
multiple steps:

- Compile the .c file to a .s file.
- Edit the .s file to change the 'progbits' type to 'note', for the section
directive that defines the .note.ABI-tag section.
- Compile the .s file to an object file.

These steps are done in the invididual Makefiles for each applicable arch.

Reviewed by: kib
/freebsd-10-stable/lib/csu/arm/
H A DMakefilediff 217375 Thu Jan 13 18:59:17 MST 2011 dim Apply a workaround for a binutils issue with the .note.ABI-tag section
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or Scrt1.o).

For all arches except sparc, gcc emits the section directive for the
abitag struct in crtbrand.c with a PROGBITS type. However, newer
versions of binutils (after 2.16.90) require the section to be of NOTE
type, to guarantee that the .note.ABI-tag section correctly ends up in
the first page of the final executable.

Unfortunately, there is no clean way to tell gcc to use another section
type, so crtbrand.c (or the C files that include it) must be compiled in
multiple steps:

- Compile the .c file to a .s file.
- Edit the .s file to change the 'progbits' type to 'note', for the section
directive that defines the .note.ABI-tag section.
- Compile the .s file to an object file.

These steps are done in the invididual Makefiles for each applicable arch.

Reviewed by: kib
/freebsd-10-stable/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/
H A Dzap.hdiff 307292 Fri Oct 14 01:44:00 MDT 2016 mav MFC r305340: MFC r305337:
7004 dmu_tx_hold_zap() does dnode_hold() 7x on same object

Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).

dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:

dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()

This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.

Sponsored by: Intel Corp.

Closes #109

Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>

openzfs/openzfs@d3e523d489a169ab36f9ec1b2a111a60a5563a9f
/freebsd-10-stable/sys/dev/syscons/
H A Dscvidctl.cdiff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
/freebsd-10-stable/sys/dev/fb/
H A Dvesa.cdiff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
diff 48104 Tue Jun 22 12:14:06 MDT 1999 yokota The second phase of syscons reorganization.

- Split syscons source code into manageable chunks and reorganize
some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized. It now should be slightly more
robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.

SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.

SC_DISABLE_DDBKEY
Disables the `debug' key combination.

SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
frame buffer.

- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.

- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
/freebsd-10-stable/lib/csu/ia64/
H A DMakefilediff 217375 Thu Jan 13 18:59:17 MST 2011 dim Apply a workaround for a binutils issue with the .note.ABI-tag section
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or Scrt1.o).

For all arches except sparc, gcc emits the section directive for the
abitag struct in crtbrand.c with a PROGBITS type. However, newer
versions of binutils (after 2.16.90) require the section to be of NOTE
type, to guarantee that the .note.ABI-tag section correctly ends up in
the first page of the final executable.

Unfortunately, there is no clean way to tell gcc to use another section
type, so crtbrand.c (or the C files that include it) must be compiled in
multiple steps:

- Compile the .c file to a .s file.
- Edit the .s file to change the 'progbits' type to 'note', for the section
directive that defines the .note.ABI-tag section.
- Compile the .s file to an object file.

These steps are done in the invididual Makefiles for each applicable arch.

Reviewed by: kib
/freebsd-10-stable/lib/msun/src/
H A Dk_tan.cdiff 151963 Wed Nov 02 04:45:21 MST 2005 bde Removed dead code for handling tan[f]() on odd multiples of pi/2. This
case never occurs since pi/2 is irrational so no multiple of it can
be represented as a float and we have precise arg reduction so we never
end up with a remainder of 0 in the "kernel" function unless the
original arg is 0.

If this case occurs, then we would now fall through to general code
that returns +-Inf (depending on the sign of the reduced arg) instead
of forcing +Inf. The correct handling would be to return NaN since
we would have lost so much precision that the correct result can be
anything _except_ +-Inf.

Don't reindent the else clause left over from this, although it was already
bogusly indented ("if (foo) return; else ..." just marches the indentation
to the right), since it will be removed too.

Index: k_tan.c
===================================================================
RCS file: /home/ncvs/src/lib/msun/src/k_tan.c,v
retrieving revision 1.10
diff -r1.10 k_tan.c
88,90c88
< if (((ix | low) | (iy + 1)) == 0)
< return one / fabs(x);
< else {
---
> {
H A Ds_rintf.cdiff 130285 Wed Jun 09 19:24:52 MDT 2004 das Fix a bug where rintf() rounded the wrong way in round-to-nearest mode
on all inputs of the form x.75, where x is an even integer and
log2(x) = 21. A similar problem occurred when rounding upward.
The bug involves the following snippet copied from rint():

i>>=1;
if((i0&i)!=0) i0 = (i0&(~i))|((0x100000)>>j0);

The constant 0x100000 should be 0x200000. Apparently this case was
never tested.

It turns out that the bit manipulation is completely superfluous
anyway, so remove it. (It tries to simulate 90% of the rounding
process that the FPU does anyway.) Also, the special case of +-0 is
handled twice (in different ways), so remove the second instance.

Throw in some related simplifications from bde:

- Work around a bug where gcc fails to clip to float precision by
declaring two float variables as volatile. Previously, we
tricked gcc into generating correct code by declaring some
float constants as doubles.

- Remove additional superfluous bit manipulation.

- Minor reorganization.

- Include <sys/types.h> explicitly.

Note that some of the equivalent lines in rint() also appear to be
unnecessary, but I'll defer to the numerical analysts who wrote it,
since I can't test all 2^64 cases.

Discussed with: bde
/freebsd-10-stable/sys/dev/coretemp/
H A Dcoretemp.cdiff 221509 Thu May 05 17:21:19 MDT 2011 delphij Detect and set Atom's Tj(max) to 90 if it's not the 45nm D400/D500/N400
series.

MFC after: 2 weeks
/freebsd-10-stable/sys/netinet/
H A Dtcp_offload.cdiff 181803 Sun Aug 17 21:43:42 MDT 2008 bz Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
/freebsd-10-stable/sys/powerpc/powerpc/
H A Dnexus.cdiff 265960 Tue May 13 15:30:56 MDT 2014 ian MFC r256901, r256914 (by nwhitehorn):

Catch up on 6 years of improvements in Open Firmware nexus devices by
importing the sparc64 one. At least 90% of this code is MI and will be
moved into /sys/dev/ofw at some point in the future.

Ignore registers on devices where the reg property is malformed. Issue a
warning if this happens under bootverbose. This prevents some
strange-looking entries in dmesg for SMU devices on Apple G5 systems.
diff 265960 Tue May 13 15:30:56 MDT 2014 ian MFC r256901, r256914 (by nwhitehorn):

Catch up on 6 years of improvements in Open Firmware nexus devices by
importing the sparc64 one. At least 90% of this code is MI and will be
moved into /sys/dev/ofw at some point in the future.

Ignore registers on devices where the reg property is malformed. Issue a
warning if this happens under bootverbose. This prevents some
strange-looking entries in dmesg for SMU devices on Apple G5 systems.
/freebsd-10-stable/usr.sbin/lpr/common_source/
H A Dstartdaemon.cdiff 78146 Tue Jun 12 14:38:20 MDT 2001 gad Fix about 90-100 warnings one gets when trying to compile lpr&friends
with BDECFLAGS on, mainly by adding 'const' to parameters in a number
of routine declarations. While I'm at it, ANSI-fy all of the routine
declarations. The resulting object code is exactly the same after
this update as before it, with the exception of one unavoidable
change to lpd.o on freebsd/alpha.

Also added $FreeBSD$ line to lpc/extern.h lpc/lpc.h lptest/lptest.c

Reviewed by: /sbin/md5, and no feedback from freebsd-audit
/freebsd-10-stable/usr.sbin/lpr/lpc/
H A Dextern.hdiff 78146 Tue Jun 12 14:38:20 MDT 2001 gad Fix about 90-100 warnings one gets when trying to compile lpr&friends
with BDECFLAGS on, mainly by adding 'const' to parameters in a number
of routine declarations. While I'm at it, ANSI-fy all of the routine
declarations. The resulting object code is exactly the same after
this update as before it, with the exception of one unavoidable
change to lpd.o on freebsd/alpha.

Also added $FreeBSD$ line to lpc/extern.h lpc/lpc.h lptest/lptest.c

Reviewed by: /sbin/md5, and no feedback from freebsd-audit
/freebsd-10-stable/usr.sbin/lpr/lpq/
H A Dlpq.cdiff 78146 Tue Jun 12 14:38:20 MDT 2001 gad Fix about 90-100 warnings one gets when trying to compile lpr&friends
with BDECFLAGS on, mainly by adding 'const' to parameters in a number
of routine declarations. While I'm at it, ANSI-fy all of the routine
declarations. The resulting object code is exactly the same after
this update as before it, with the exception of one unavoidable
change to lpd.o on freebsd/alpha.

Also added $FreeBSD$ line to lpc/extern.h lpc/lpc.h lptest/lptest.c

Reviewed by: /sbin/md5, and no feedback from freebsd-audit
/freebsd-10-stable/usr.sbin/lpr/pac/
H A Dpac.cdiff 78146 Tue Jun 12 14:38:20 MDT 2001 gad Fix about 90-100 warnings one gets when trying to compile lpr&friends
with BDECFLAGS on, mainly by adding 'const' to parameters in a number
of routine declarations. While I'm at it, ANSI-fy all of the routine
declarations. The resulting object code is exactly the same after
this update as before it, with the exception of one unavoidable
change to lpd.o on freebsd/alpha.

Also added $FreeBSD$ line to lpc/extern.h lpc/lpc.h lptest/lptest.c

Reviewed by: /sbin/md5, and no feedback from freebsd-audit
/freebsd-10-stable/gnu/usr.bin/groff/tmac/
H A DMakefilediff 49291 Fri Jul 30 17:15:16 MDT 1999 mpp Make direct calls to nroff work again. Rev 1.5 of contrib/gnu/nroff/nroff.sh
broke nroff because it added the '-S' option to the troff call, which
requires that the tmac.safer macro package be installed.

Since 90% of our *roff calls are probably generated by man(1), and
man(1) calls groff directly, I'm not really sure what rev 1.5 of nroff.sh
was trying to fix, but at least now nroff works again.

Broken by: imp
/freebsd-10-stable/usr.bin/indent/
H A Dindent.1diff 125736 Thu Feb 12 14:25:12 MST 2004 bde Only indent once for continuation lines when not lining up with
parentheses if the continuation indent is exactly half of the main
indent. Indenting one contination indent for every level of
parentheses gives bad results in most cases and is not what is done
in about 90% of properly hand-formatted KNF code (sys/kern/*.c,
nvi/common/*.c). The main advantage of the non-default KNF options
-nlp -ci4 is that continuation lines don't accidentally line up with
the next main indentation level or march to the right, and increasing
their indentation defeats this.

This behaviour change is limited to when the continuation indent is
exactly half of the main indent to avoid adding yet another option.

Completed in 420 milliseconds

12345678