Searched hist:5 (Results 1 - 25 of 11096) sorted by relevance

1234567891011>>

/freebsd-11.0-release/sys/dev/bwn/
H A Dif_bwn_phy_g.hdiff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
diff 299790 Sat May 14 23:52:44 MDT 2016 adrian [bwn] add new types, prepare for PHY-N; prepare for rev 5xx firmware.

This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.

* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.

* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.

Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
/freebsd-11.0-release/share/man/man5/
H A Dportindex.5diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
187825 Wed Jan 28 15:35:11 MST 2009 tabthorpe - Add initial version of portindex(5) manual page

PR: docs/70652
Submitted by: Paul Armstrong <psa otoh.org>
Reviewed by: pav keramida trhodes
Approved by: keramida
MFC after: 3 days
H A DMakefilediff 300071 Tue May 17 18:57:06 MDT 2016 jhb Remove the reiserfs(5) manpage and an example of loading the kernel module.
diff 290659 Tue Nov 10 13:34:05 MST 2015 ngie - Move ng_bluetooth.4 under MK_BLUETOOTH != no
- Move all section 5 bluetooth manpages under MK_BLUETOOTH != no

MFC after: 3 days
PR: 193260
Reported by: Philippe Michel <philippe.michel7@sfr.fr>
Sponsored by: EMC / Isilon Storage Division
diff 255505 Fri Sep 13 03:45:57 MDT 2013 gjb Do not install freebsd-update.conf.5 manual if WITHOUT_FREEBSD_UPDATE is
set.

MFC after: 3 days
Approved by: re (delphij)
Sponsored by: The FreeBSD Foundation
diff 240494 Fri Sep 14 12:01:59 MDT 2012 glebius o Create directory sys/netpfil, where all packet filters should
reside, and move there ipfw(4) and pf(4).

o Move most modified parts of pf out of contrib.

Actual movements:

sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5

sys/netinet/ipfw -> sys/netpfil/ipfw

The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.

Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.

The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.

Discussed with: bz, luigi
diff 230328 Thu Jan 19 02:55:40 MST 2012 kevlo Add missing MLINKS to INDEX.5
diff 220640 Thu Apr 14 18:40:13 MDT 2011 trasz Add manual page for rctl.conf(5).
diff 187825 Wed Jan 28 15:35:11 MST 2009 tabthorpe - Add initial version of portindex(5) manual page

PR: docs/70652
Submitted by: Paul Armstrong <psa otoh.org>
Reviewed by: pav keramida trhodes
Approved by: keramida
MFC after: 3 days
diff 183631 Sun Oct 05 19:04:38 MDT 2008 danger Add initial version of the nullfs(5) man page

MFC after: 3 days
diff 171851 Wed Aug 15 06:41:08 MDT 2007 danger The /boot.config file is available only on i386 and amd64, so install
boot.config.5 only those architectures.

Approved by: re@ (bmah)
Reported by: simon
diff 171840 Tue Aug 14 15:25:32 MDT 2007 danger Add the boot.config.5 manual page.

Reviewed by: keramida
Approved by: re@ (bmah)
PR: docs/112307
/freebsd-11.0-release/sys/boot/pc98/boot0/
H A Dboot0.s64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
/freebsd-11.0-release/sys/boot/pc98/boot0.5/
H A Dboot.s64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
H A Dsupport.s64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
H A Dsyscons.s64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
64123 Wed Aug 02 08:46:08 MDT 2000 kato Added PC-98 HDD boot manager. The boot0 is the `IPL' which occupies
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.

The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
/freebsd-11.0-release/sys/boot/forth/
H A Dbeastie.4th.8diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
diff 244158 Wed Dec 12 17:57:56 MST 2012 dteske Fix a regression caused by SVN r222417.

Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.

This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).

loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).

Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.

Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.

PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
/freebsd-11.0-release/share/man/man4/
H A Dsbp.4diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 231244 Thu Feb 09 04:53:46 MST 2012 gjb Fix some Xr references:

- ada(4): ad(4) - removed, ada(4) would be a self-referencing entry
- cd(4): ad(4) -> ada(4)
- da(4): ad(4) -> ada(4)
- DEVICE_PROBE(9): ugen(5) -> ugen(4)
- ed(4): dhclinet(8) -> dhclient(8) (typo)
- lmc(4): Netgraph(4) -> netgraph(4)
- security(7): rc.conf(8) -> rc.conf(5)
- sfxge(4): cpuset(8) -> cpuset(1)
- sbp(4): sysctl(1) -> sysctl(8)
- portindex(5): build(1) -> build(7)
- u3g(4): usbconfig(5) -> usbconfig(8)
- usb_quirk(4): usbconfig(5) -> usbconfig(8)

Found with: textproc/igor
MFC after: 3 days
diff 123591 Wed Dec 17 09:51:25 MST 2003 brueffer o grammar fixes
o removed wrong 's usage

MFC after: 5 days
/freebsd-11.0-release/contrib/openbsm/libbsm/
H A Dau_domain.3diff 189279 Mon Mar 02 13:32:58 MST 2009 rwatson Merge OpenBSM 1.1 beta 1 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).

OpenBSM history for imported revision below for reference.

MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 beta 1

- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
diff 189279 Mon Mar 02 13:32:58 MST 2009 rwatson Merge OpenBSM 1.1 beta 1 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).

OpenBSM history for imported revision below for reference.

MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 beta 1

- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
diff 189279 Mon Mar 02 13:32:58 MST 2009 rwatson Merge OpenBSM 1.1 beta 1 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).

OpenBSM history for imported revision below for reference.

MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 beta 1

- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
diff 189279 Mon Mar 02 13:32:58 MST 2009 rwatson Merge OpenBSM 1.1 beta 1 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).

OpenBSM history for imported revision below for reference.

MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 beta 1

- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
diff 189279 Mon Mar 02 13:32:58 MST 2009 rwatson Merge OpenBSM 1.1 beta 1 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).

OpenBSM history for imported revision below for reference.

MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 beta 1

- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
diff 187214 Wed Jan 14 10:48:08 MST 2009 rwatson Merge OpenBSM alpha 5 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.

OpenBSM history for imported revisions below for reference.

MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 alpha 5

- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
diff 187214 Wed Jan 14 10:48:08 MST 2009 rwatson Merge OpenBSM alpha 5 from OpenBSM vendor branch to head, both
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.

OpenBSM history for imported revisions below for reference.

MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project

OpenBSM 1.1 alpha 5

- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
187063 Sun Jan 11 21:39:23 MST 2009 rwatson Vendor import of OpenBSM 1.1 alpha5, which incorporates the following
changes since the last imported OpenBSM release:

OpenBSM 1.1 alpha 5

- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.

Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
/freebsd-11.0-release/contrib/libxo/
H A D.travis.ymldiff 287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
diff 287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A DINSTALL.md287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
/freebsd-11.0-release/contrib/libxo/doc/
H A DMakefile.amdiff 287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
diff 287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
/freebsd-11.0-release/contrib/libxo/encoder/
H A DMakefile.am287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
/freebsd-11.0-release/contrib/libxo/encoder/cbor/
H A DMakefile.am287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
/freebsd-11.0-release/contrib/libxo/encoder/test/
H A DMakefile.am287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Denc_test.c287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
/freebsd-11.0-release/contrib/libxo/libxo/
H A Dadd.man.in287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_buf.h287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_emit_err.3287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_encoder.c287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_encoder.h287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_humanize.h287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_message.3287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
H A Dxo_set_syslog_enterprise_id.3287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo
287111 Mon Aug 24 16:32:40 MDT 2015 marcel Upgrade libxo to 0.4.5.

Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from: https://github.com/Juniper/libxo

Completed in 320 milliseconds

1234567891011>>