Searched hist:4193 (Results 1 - 8 of 8) sorted by relevance
| /freebsd-9.3-release/etc/rc.d/ | ||
| H A D | ip6addrctl | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| H A D | netif | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| H A D | netoptions | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| /freebsd-9.3-release/etc/ | ||
| H A D | network.subr | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| /freebsd-9.3-release/share/man/man5/ | ||
| H A D | rc.conf.5 | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| /freebsd-9.3-release/etc/defaults/ | ||
| H A D | rc.conf | diff 206408 Thu Apr 08 23:42:25 MDT 2010 dougb Improve the handling of IPv6 configuration in rc.d. The ipv6_enable and ipv6_ifconfig_<interface> options have already been deprecated, these changes do not alter that. With these changes any value set for ipv6_enable will emit a warning. In order to avoid a POLA violation for the deprecation of the option ipv6_enable=NO will still disable configuration for all interfaces other than lo0. ipv6_enable=YES will not have any effect, but will emit an additional warning. Support and warnings for this option will be removed in FreeBSD 10.x. Consistent with the current code, in order for IPv6 to be configured on an interface (other than lo0) an ifconfig_<interface>_ipv6 option will have to be added to /etc/rc.conf[.local]. 1. Clean up and minor optimizations for the following functions: ifconfig_up (the ipv6 elements) ipv6if ipv6_autoconfif get_if_var _ifconfig_getargs The cleanups generally were to move the "easy" tests earlier in the functions, and consolidate duplicate code. 2. Stop overloading ipv6_prefer with the ability to disable IPv6 configuration. 3. Remove noafif() which was only ever called from ipv6_autoconfif. Instead, simplify and integrate the tests into that function, and convert the test to use is_wired_interface() instead of listing wireless interfaces explicitly. 4. Integrate backwards compatibility for ipv6_ifconfig_<interface> into _ifconfig_getargs. This dramatically simplifies the code in all of the callers, and avoids a lot of other code duplication. 5. In rc.d/netoptions, add code for an ipv6_privacy option to use RFC 4193 style pseudo-random addresses (this is what windows does by default, FYI). 6. Add support for the [NO]RTADV options in ifconfig_getargs() and ipv6_autoconfif(). In the latter, include support for the explicit addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done in the current code. 7. In rc.d/netif add a warning if $ipv6_enable is set, and remove the set_rcvar_obsolete for it. Also remove the latter from rc.d/ip6addrctl. 8. In /etc/defaults/rc.conf: Add an example for RTADV configuration. Set ipv6_network_interfaces to AUTO. Switch ipv6_prefer to YES. If ipv6_enable is not set this will have no effect. Add a default for ipv6_privacy (NO). 9. Document all of this in rc.conf.5. |
| /freebsd-9.3-release/sys/i386/i386/ | ||
| H A D | machdep.c | diff 4193 Sat Nov 05 23:33:03 MST 1994 bde Nuke the losing version of microtime. The assembler version now works for all reasonable HZ's. HZ > 1000 doesn't work because of sloppy conversions in hzto() (division by (tick / 1000) == 0). This was fixed in 1.1.5. Eliminate some extern declarations by including the appropriate header files that now contain appropriate declarations. |
| /freebsd-9.3-release/sys/amd64/amd64/ | ||
| H A D | machdep.c | |
Completed in 423 milliseconds